|
| 1 | Earthwork in excavation by mechanical means ( hydraulic excavator ) in trenches for foundations , drains, pipes, cables, etc. ( not exceeding 1.5 m in width ) and for shafts, wells , cesspits and the like not exceeding 10 sqm on plan , including dressing of sides and ramming of bottoms lift upto 1.5 m , including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil. |
| 2 | Soling stone in horizontal including cost of stone |
| 3 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) (crushed) |
| 4 | Random rubble masonry with hard stone from qurry in foundation and plinth level with cement concrete 1:6:12 at plinth with 1:6 mix |
| 5 | Reinforced cement concrete work in wall (any thicknes) including attached pilasters, column pillar ,piers etcupto floor five level excluding the cost of centering, shuttering, finishing and reinforcement. All work upto plinth level (1:1.5:3) stone agg. 20mm n/size. Including carriage |
| 6 | Reinforcement for RCC work including, straightening, cutting, bending, placing in position and binding all complete including carriageThermo Mechanically Treated bars. |
| 7 | Sundried brick masonary laid in mud mortar including carriage loading unloading extra complete job. |
| 8 | Centering and shuttering, Including strutting, propping etc and removal of form fora) Foundation , footing |
| 9 | b) Column , pillars, piers, etc. |
| 10 | c) Lintel, Beam, plinth beam, etc |
| 11 | d) Soakage pit tank |
| 12 | e) Edge of the slab |
| 13 | 50mm thick cement concrete flooring 1:2:4 (1 cement: 2coarse sand:4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete. |
| 14 | Providing wood work in frames of doors, windows, celestory windows and other frames ,wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately). Second class kail wood |
| 15 | Providing and fixing flushed door shutters conforming todecorative type , core of block board construction with frame of ist class hard wood and well matched commercial ply venering with vertical grains or cross bands and face veneers on both faces of shuttersa) 35 mm thick including ISI marked M.S pressed bright finished butt hinges with necessary screws of required size |
| 16 | Providing and fixing glazed shutters for doors , windows and celestory windows using 10 kg / sqm (4mm thick) float glass panes including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws.Second class kail wood |
| 17 | Wood work in frame of false ceiling particular etc. sawn and fixed in portion . Budloo wood |
| 18 | P/F of Wooden planking,tongued and grooved in flooring including fixing with iron screws complete. |
| 19 | Providing and fixing specified board medium density exterior grade ( Grade I ) to frame , backing or studding with screws etc. complete ( Frames , backing , or studding to be paid separately): Flat presed 3 layer particle board or graded wood particle board IS:3087 |
| 20 | Providing and fixing of 12 mm thick thermocol for insulation inside ply |
| 21 | Applying priming coat of With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 22 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 23 | P/F aluminium slidingbolts isi marked anodised (anodic coating not less then grade Ac 10 as per Is: 1868 with necessaryscrews etc complete. A) Door = 250x10mmDoor |
| 24 | P/F aluminiumtowerbolts isi marked anodised (anodic coating not less then grade Ac 10 as per Is: 1868 with necessaryscrews etc complete. |
| 25 | P/F alumimium handle ISI marked AC 10 as per 1868 with necessary screw etc complete a) 100 mm |
| 26 | b) 125mm |
| 27 | 15 mm thick cement plaster on rough side of single or halfbrick wall of mix 1:4( 1cement: 4 coarse sand) |
| 28 | 6 mm thick cement plaster to ceiling of mix 1:3 (1 Cement :3 coarse sand) ) |
| 29 | Rough cast plaster upto 10 m height above ground level with a mixture of crushed stone 6 to 10 mm size including the fresh plaster into layer under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement |
| 30 | Applying one coat of cement primer of approved brand and manufacture on wallsurface water thinable cement primer |
| 31 | Distempering withoil bound washable distemper of approved brand and manufacture of required shade and colour complete .New work two or more coat |
| 32 | Providing and laying floor tiles 300x300 mm thickness to be specified by the manufacture of 1st quality conforming to IS 13755 of NITCO, ORIENT, SOMANY KAJARIA or equivalent makes in colour such as white ivory, grey laid in 20 mm thick cement mortar 1:4 mix (1 Cement: 4 coarse sand) including painting with joints with white cement and matching pigment etc complete. |
| 33 | Providing and fixingceramic glazed tilesconforming to IS 3753 of minimum thickness 5mm of approved makes like NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all colours, shades, except beyond bottle green, black of any size as approved by engineer incharge in skirting risers of steps and dedos over 12mm thick bed of cement mortar1:3 and paint with grey cement slurry @ 3.3 kg.m2 |
| 34 | Providing and applying white cement based putty of avg. thickness 2 mm of approved brand and manufacture, over the plastered wall surface to prepare the wall surface even and smooth. Complete job as per the instruction of engineer- in- charge |
| 35 | chequerred precast cement concrete tiles 22mm thick in footpath and courtyart jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc complete on 20mm thick bed of cement mortar 1:4 A) LIGHT SHADE USING WHITE CEMENT |
| 36 | Random rubble masonry with hard stone from qurry in foundation and plinth level laid in dry |
| 37 | Providing and fixing ofsteel railing for stairs etc(Frontstair). |
| 38 | Plumbing: Providing and fixing white vitreous china Pedestial type water closet ( European type W.C pan) with seat and lid 10 lit low level white PVC flushing cistern with manually controlled device ( handle lever) conforming to IS 7231 with all fittings and fixtures complete including cutting and makinggood the wall and floors wherever requiredWC pan with ISI marked white solid plastic. Lid and seat |
| 39 | Providing and fixing wash basin with CI/MS brackets 15 mm CP brass pillar taps32 mm CP brass waste of standard pattern including painting or fitting and brackets cutting and making good the walls, wherein required white vitreous china wash basin size 550x400 mm with the pair of15mm CP brass pillar tape. |
| 40 | Providing and fixing PVC wastepipe for sink or wash basin including PVC waste fitting complete flushable pipe 32 mm dia |
| 41 | Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plasticmouldedframe of approved make and shade with 6 mm thick hard board backing Circularshape of 50 mm dia |
| 42 | Providing and fixing toilet paper holder CP Brass |
| 43 | Providing and fixing PTMT waste coupling for wash basin and sink of approved quality and colour |
| 44 | Providing and fixing PTMT towel bolt railing complete with bracketfixed to wooden seat with CP brass screw with connected fittings arrangement of approved quality and colour I) 450 mm long towel rail with total length of 495 mm 78 mm width and effective height of 88 mm No weighing not less than 170 grams |
| 45 | Providing and fixing brass bib cock of approved quality 15 mm nominal size |
| 46 | Providing and fixing CP brass shower of approved quality |
| 47 | Providing and fixing 3 layer PP-R poly propylent random copolymer pipes SDR 7.4 UV stabilized and anti micro bulb fusion welded having thermal stability for hot and cold water supply incl. all PPR plain and brass threaded polyppulent random fittings including fixing the pipe with clamps at 1.00 mtr spacing this include cost of cutting chases and makinggood the same . Testing of joints complete as per direction of engineer in charge concealed work incl. cutting cahses and making good the walls etc ( including all fittings)a)32mm dia |
| 48 | b) 40mm dia |
| 49 | Providing and fixing chlorinated poly venyl chlorideCPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 spacing this includes jointing of pipes and fitting with one step CPVC solvent cement and testing of joints complete as per direction of engineer-in-charge ( Internal work exposed on wall) including all fittings a) 100 mm dia |
| 50 | b) 75mm dia |
| 51 | Providing/placing on terrace ( at all floor level) polyethayeline water storage tank IS 12701 marked indicating BIS licenced number with cover and suitable locking arrangement and making necessary holes for inlet and outlet and over flow pipes but without fittings and base support for tank syntaxelectroplast,star.lotus or equivalent ofr having valid ISI licencea) 1000 Ltr |
| 52 | b) 500 Ltr |
| 53 | Providing and fixing ball valve 40mm dia( PPR) |
| 54 | Providing andfixing of CP jali. |
| 55 | Providing and fixing of cp brass nipple 12-25mm long |
| 56 | providing and fixing of cp brass nipple 12-37mm long |
| 57 | providing and fixing of cp brasssoap container |
| 58 | providing and fixing of cp brass basin mixer. |
| 59 | Providing and fixingof cp angle valve for basin mixer ,gyser point etc of standed design and of app make conforming to is; 8931 1)15mm nominal bore |
| 60 | providing and fixing ofKITCHEN SINK( stainless steel) INCLUDING making all connections 600*450*150, complete job |
| 61 | Providing and fixing of insulation on PPR pipe by way of using k-flex , aluminium sheet, taping polythene, wraping and chicken mesh ( complete job) |
| 62 | Insulation work on water storage tank by way of using tapping , glass wool, chicken mesh, k-flex sheet, aluminium sheet and polythene ( complete job) 500 ltr |
