|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed: All Kinds of Soil. |
| 2 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in:All kinds of soil. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 4 graded stone aggregate 40mm nominalsize). Nallah Stones. |
| 4 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen\"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size) |
| 5 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. |
| 6 | Centring and shuttering including strutting~ propping etc and removal of form work for.Foundations footings. bases of columns. |
| 7 | Centring and shuttering including strutting~ propping etc and removal of form work for Lintels, beams, plinth beams, girders, bressumers and centilevers. |
| 8 | Centring and shuttering including strutting~ propping etc and removal of form work for Columns, piers, abutments, pillars, posts and struts. |
| 9 | Centring and shuttering including strutting~ propping etc and removal of form work for Suspended floors, roofs, landings, balconies and access platform. |
| 10 | Centring and shuttering including strutting~ propping etc and removal of form work for: Stairs(excluding landings except spiral staircase) |
| 11 | Random Rubble masonry with hard stone from nallah in foundation and plinth including levelling up with cement concrete 1 :6:12 ( 1 Cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with cement mortar 1:6 (1 Cement: 6 coarse sand). |
| 12 | Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarsesand), cost of required centring, shuttering and complete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) ,Crushed. |
| 13 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood. |
| 14 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. Second kail wood. 35mm/sqm. For doors. |
| 15 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. Second class kail wood. 30mm per sqm. |
| 16 | 15mm Cement plaster on the rough side of single orhalf brick wall of mix: 1 : 4 ( 1 cement : 4 coarse sand) . |
| 17 | 6mm cement plaster to ceiling of mix 1 : 3 (1 cement: 3 fine sand). |
| 18 | Rough cast plaster upto 10m height above ground level with a with a mixture of sand and gravel or crushed stone from6mm to 10mm nominal size dashed over and including the freah plaster in two layers, under layer 12mm cement plaster 1: 4 ( 1 cement , 4 coarse sand) and top layer 10mm cementplaster 1 : 3( 1 cement :3 fine sand) mixed wiith 10% finely grounded hydrated lime by volume of cement ( ordinary cemment finished using ordinary cement) |
| 19 | Providing and applying white cement based putty ofaverage thickness 2 mm, of approved brand andmanufacture, over the plastered wall surface to preparethe surface even and smooth complete. |
| 20 | Distempering with oil bound washable distemper ofapproved brand and manufacture to give an even shade. New work (two or more coats) over and including priming coat with cement primer |
| 21 | Finishing walls with acrylic smooth exterior paint ofrequired shade on New work (two or more coats applied@ 1.67 litre/1 Osqm over and including base Coat ofwater proofing cement paint applied @ 2.20kg/1 Osqm) |
| 22 | Applying priming with ready mixed pink or grey primer ofapproved brand and manufacture on woodwork (hard and soft wood). |
| 23 | Painting with synthetic enamel paint of approved brandand manufacture to give an even shade. Two or more coatson new work |
| 24 | Providing and laying of dry stone soiling in horizontal level , hand packed including cost of stones. |
| 25 | Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand . : 4 graded stone aggregate) finished with a floating coatof neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.50 mmthick with 20mm nominal size stone aggregate. |
| 26 | Providing and laying/ fixing Ceramic glazed floor tiles300x300 mm (thickness to be specified by themanufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, KAJARIA, SOMANY or equivalent makein colour shades except White, Ivory, Grey, Fume Red,Brown laid on 20 mm thick bed of Cement Mortar 1: 4(1 cement: 4 coarse sand) including pointing the jointswith white cement and matching pigments etc., complete. |
| 27 | Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeer in- Charge in skirting, risers of steps and dados over 12mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 28 | Providing and fixing finished brass tower bolt (barrrale type) with necessary Screws 150 x10mm Bolt |
| 29 | Providing and fixing finished brass tower bolt (barrrale type) with necessary Screws 100 x10mm Bolt |
| 30 | Providing and fixing bright fininhed brass sliding doors, vbolts with nuts and necessary screws extra 300x16mm |
| 31 | Providing and fixing bright fininhed brass handle with necesssary and screw extra 125mm |
| 32 | Providing and fixing bright fininhed brass handle with necesssary and screw extra 100mm |
| 33 | Random Rubble Masonry with hard stone from nallah in foundation and plinth laid in mud mortar. |
| 34 | Providing and laying of local round ballies for roofing including carriage and complete job. |
| 35 | Providing and layong of local talboo roofing with 100mm mud phuska complete. |
| 36 | Providing and laying of sundried brick masonry laid in mud mortar, including carriage and complete job. |
| 37 | Providing wood work in joist for roofing ceiling , partitin etc. sawn and fixed in position. Budloo/fir wood. |
| 38 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, boltsand nuts 8mm diameter with bitumen and G. I limpet washersor with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approvedpaint on overlapping of sheets complete (upto any pitch inhorizontal/vertical or curved surface)excluding the cost ofpurlins, rafters and trusses and including cutting to size andshape whereever required.0.63mm thick with zinc coating not less than 27 5gm/m2 . |
| 39 | Dry random rubble masonry with hard stone in foundation and plinth:Using nallah stone without bond stone. |
| 40 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P orStrap,10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) \"manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors whereverrequired. Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests |
| 41 | Providing and fixing white vitreous china pedestal typewater closet (European type W.C . .pan) with seat and lid,10 litre low level white P.V.C. flushing cistern includingflush pipe with manually controlled device (handle lever)conforming to IS:7231, with all fittings and fixtures,complete including cutting and making good the wallsand floors wherever requied: W.C. pan with lSI marked white solid plastic seat and lid. |
| 42 | Providing and fixing wash basin with C. I./M.S. brackets,15mm C.P. brass pillar taps, 32 mm C.P. brass waste ofstandard pattern, including painting of fittings andbrackets, cutting and making good the walls whereverrequired: White Vitreous ChinaWash basin size 550x400 mm with a pair of 15 mm C. P. brasspillar taps |
| 43 | Providing and fixing white vitreous china pedestal for washbasin completely recessed at the back for the reception ,, of pipes and fittings: |
| 44 | Providing and fixing PTMT Waste Coupling for wash basinand sink, of approved quality and colourWaste coupling 38mm of 83 mm length and 77 mm breadth weighing not less than 60gms: |
| 45 | Providing and fixing soil, waste and vent pipes : 100 mm dia. PVC. |
| 46 | Providing and fixing soil, waste and vent pipes : 75 mm diameter. PVC. |
| 47 | providing and fixing PVC waste pipe for sink and wash basin including pvc waste fitting complete. Flexible pipe 40mm dia |
| 48 | providing and fixing PPR pipees SDR 7.4 UV stabilized and anti- microbial fusuion welded having thermakl stabilitry welded ..including Bend, TEE, socket, all fixing and requirement as per the direction of site engineer incharge . |
| 49 | Providing and fixing white vitreous china laboratory sinkwith C. I. brackets, C.P. brass chain with rubber plug 40mmC.P. brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including paintingof fittings and brackets, cutting and making good the wallswherever required : 19.11.1 Size 450x300x150 mm |
| 50 | Providing and fixing C.P. brass bib cock of approved qualityconforming to IS : 8931 15 mm nominal bore |
| 51 | Providing and placing on terrace (at all floor levels)polyethylene water storage tank lSI : 12701 marked indicatingthe BIS License No. with cover and suitable lockingarrangement and making necessary holes for inlet, outletand overflow pipes but without fittings and the base support b for tank [Sintex, Electroplast, Star, Lotus or equivalent havingvalid lSI license]. |
| 52 | Providing and fixing 600x450 mm bevelled edge mirror ofsuperior glass (of approved quality) complete with 6 mmthick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete. |
| 53 | Providing and fixing 100mm sand PVC grating for gully , floor or nahani trap. |
| 54 | Providing and fixing double equal plain junction of required degree: 75x75x75 |
| 55 | Proving and fixing double equal plain junction of required degree:100x100x100 |
| 56 | Providing and fixing PTMT liquid soap container 109 mmwide, 125 mm high and 112 mm distance from wall ofstandard shape with brackets of the same materials withsnap fittings of approved quality and colour, weighing notless than 105 gms. |
| 57 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour:600 mm long towel rail with total length of 645 mm, 78 mm wide and effectiveheight of 88 mm, weighing not less than 190 gms. |
| 58 | Providing and fixing toilet paper holder:C.P. brass |
| 59 | Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standardtubular sections/appropriate Z. sections and othersections of approved make conforming to IS : 733 and IS: 1285, fixed with dash fastener of required dia. and sizeincluding necessary filling up of gaps at junctions i.e, attop, bottom and sides with required EPDM rubber Ineoprene .. gasket felt etc. Aluminium sections shall besmooth, rust free, straight, mitred and jointedmechanically wherever required including cleat angle,Aluminium snap beading for glazing I panelling, C.P.brass I stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in Charge (glazing, panelling and dash fasteners to be paidfor separately.) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, minimum anodic coating of grade AC 15). 63x38x1.85mm |
| 60 | Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standardtubular sections/appropriate Z. sections and othersections of approved make conforming to IS : 733 and IS: 1285, fixed with dash fastener of required dia. and sizeincluding necessary filling up of gaps at junctions i.e, attop, bottom and sides with required EPDM rubber Ineoprene gasket felt etc. Aluminium sections shall besmooth, rust free, straight, mitred and jointedmechanically wherever required including cleat angle,Aluminium snap beading for glazing I panelling, C.P.brass I stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in Charge (glazing, panelling and dash fasteners to be paidfor separately.) For shutters of doors, windows & ventilators including providing and fixing hinges I pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber I neoprene gasket required (Fittings shall be paid for separately.) For Anodised aluminium (anodised transparent or |
| 61 | Providing and fixing 12mm thick prelaminated particleboardflat pressed three layer or graded wood particleboard (conforming to IS: 12823 Grade-l type-11) in panellingfixed in aluminium doors, windows shutters and partitionframes with C. P. brass I stainless steel screws etc.complete as per architectural drawings and directions of \ engineer-in-charge Pre-laminated particle board with decorativelamination on one side and balancing lamination on other side. |
| 62 | Providing and fixing glazing in aluminium door, window,ventilator shutters and partitions etc. with EPDM rubberI neoprene gasket etc. complete as per the architecturaldrawings and the directions of engineer-in-charge. (Costof aluminium snap beading shall be paid in basic item.)With float glass panes of 5.50 mm thickness (weight not less than 13 .. 50 kg I sqm) |
| 63 | Providing, fixing and applying plaster of paris (POP) false ceilingconsisting of frame work made with 50mm sq M.S. tubes of 18G thickness as main runner at 600 mm c/c both ways, -isuspended/ supported with M.S. flats 25x4 mm from existing R.C.C. slab including providing and fixing expanded metal ofsize 5.25mmx1.25mm thickness welded to main runner andapplying POP (calcium sulphate semihydrate variety)to theexpanded metal of thickness not less than 1 Omm finished smooth to line and level including necessary supports scaffolding etc. as required and also including applying a coat of red oxide zinc chromate primer over the M.S. fiame work and suspenders complete. |
| 64 | Providing and fixing readymade wooden flooring (AC4\") of approved brand an approved by engineer incharge complete job |
| 65 | Steel work in built up tubular round, square or rectangularincluding cutting , hoisting , fixing in position and applyinga priming coat of approved steel primer including weldingand bolting with special shaped washers etc.complete. Hot finished welded type tubes. |
| 66 | Providing and laying damp-proof course 5Crnm thick withcement concrete 1:2:4 (1 cement : 2 co.:Hse sand 4graded stone aggregate 20mm nominal size. Nallah. |
| 67 | Carriage of stones from source to site from an average lead up to 5 km by mechanical transport. |
| 68 | Carriage of sand and coarse aggregates from source to site from an average lead up to 3 km by mechanical transport. |
| 69 | Carriage of cement and steel from source to site from an average lead up to 190 km. |
