Water Resources Department-WRD has published Rate Through E - Quotations Are Invited For Material Category Annexed As ( I ) 20 H.P. Solar Pump, Vfd, Solar Panel Set And Ii ) 10 H.P. Dc Solar Pump, Solar Panel, Steel Structure Supplying, Installation And Commissioning For Lift Irrigation Scheme. Submission Date for this Tender is 03-03-2022. Bolts Tenders in hazaribag Jharkhand. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | For 20 Hp SPV AC Surface Pump |
2 | Solar Module Mounting (Galvanised Steel) surface structure (for 50 kW) having Hot deep galvanised ofZinc thickness 80micron and as per IS4759 with C Channel $ anti theft with nut bolt of grade SS304,which should also withstand high wind velocity upto 150km/hr or as per MNRE. |
3 | 50kWp SPV module of 330wP or higher rating, which must have Specification as per IS 14286/IEC 61215 .The module must have to quilifyIS/IEC 61730 part I $ II (or having mechanical load test of 5400Pa) for safety purpose.Module to Module wattage mismatch in SPV Array shall be +/-3% and to qualify IEC TS 62804-:2015 for the detection of potential induced degradation and warranted for output wattage not less than 90% in 10yrs and 80% at the end of 25yrs as per MNRE. |
4 | SPV controller/VFD integrated with GPRS,having MPPT ,Protection IP 65 or above as per MNRE to run 20HP AC Solar Pump. |
5 | Solar cable 4 mm2usedas per IS 694 or as per MNRE. |
6 | copper cable 95 mm2 used as per IS 694 or as per MNRE. |
7 | Arrangement of Lightening Arrestor excluding Earthing for 50kW & 3 nos. 20HP Solar Pump |
8 | 20 H.P. A.C. Solar pump set ofhaving performance with respect to Total Head,Maximum Current,Capacity, Voltage Range etc as per MNRE guidelines. |
9 | Array junction box (IP 65 or above ) as per MNRE for 50kW SPV. |
10 | Miscllaneous Accessories for Installation of 20H.P. Solar Pump |
11 | Supplying,installation and commissioning Charge of Module and Structure for 50kW. |
12 | Maintenance for atleast 5 years or as per MNRE guidelines for 50kW SPV module & 3 nos. 20HP AC Solar Pump with all accessories |
13 | For 10 Hp SPV DC Surface Pump Solar Module Mounting (Galvanised Steel) surface structure for 50 kW having Hot deep galvanised ofZinc thickness 80micron and as per IS4759 with C Channel $ anti theft with Nut Bolt of grade SS304which should also withstand high wind velocity upto 150km/hr or as per MNRE. |
14 | 50 kWp SPV module 330wP or higher which must have Specification as per IS 14286/IEC 61215 .The module must have to quilifyIS/IEC 61730 part I $ II (or having mechanical load test of 5400Pa) for safety purpose.Module to Module wattage mismatch in SPV Array shall be +/-3% and to qualify IEC TS 62804-:2015 for the detection of potential induced degradation and warranted for output wattage not less than 90% in 10yrs and 80% at the end of 25yrs as per MNRE. |
15 | SPV controller/VFD integrated with GPRS,having MPPT ,Protection IP 65 or above as per MNRE to run 10HP DC Solar Pump. |
16 | Solar cable of 4mm2 used as per IS 694 or as per MNRE |
17 | Copper cable 25mm2 used as per IS 694 or as per MNRE. |
18 | Arrangement of Lightening Arrestor excluding Earthingas per MNRE for 50kW SPV $ 5 nos 10HP DC Solar Pump. |
19 | 10 H.P. D.C. (PMSM/BLDC/SRM) Solar pump set ofhaving performance with respect to Total Head, Maximum Current,Capacity,Voltage Range etc as per MNRE guidelines. |
20 | Array junction box (IP 65 or above) as per MNRE for 50 kW SPV. |
21 | Miscllaneous Accessories for Installation of 10 H.P. Solar Pump |
22 | Supplying,installation and commissioning Charge of Module and Structure for 50kW. |
23 | Maintenance for atleast 5 years or as per MNRE guidelines for 50kW SPV module & 5 nos. 10HP DC Solar Pumpwith all accessories |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail