|
| 1 | PART-I B/R WORKSSurface excavation n. exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in hard/dense soil, complete all as specified and directed. |
| 2 | Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth and not exceeding 10Sqm on plan and getting out in hard/dense soil, trimming sides, leveling bottom, watering and well ramming bottom, complete all as specified and directed. |
| 3 | Returning, filling in trenches (soil), including spreading, leveling and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed. |
| 4 | Removal of surplus excavated soil to a distance not exceeding50metre and depositing where directed at a level not exceeding1.5metre above the starting point,complete all as specified and directed. |
| 5 | Removing excavated material exc. 250metre km but n exc. 500metre and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed. |
| 6 | Material and labour, Plain Cement Concrete (1:4:8)type D-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified and directed. |
| 7 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finished, complete all as specified and directed. |
| 8 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for flat, rough finished surface, complete all as specified and directed. |
| 9 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete, square, complete all as specified and directed. |
| 10 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) or flat, rough finished, complete all as specified and directed. |
| 11 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide on rough finished surfaces of concrete, complete all as specified and directed |
| 12 | Supply and fix in position, mild steel bars TMT, 10m dia and over, cut to length, bent to shape required, including cranking, bending for hooping of columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, as in reinforcement, complete all as specified and directed. |
| 13 | Supply and fix in position, mild steel bars TMT, 6mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 14 | Material and labour, reinforced cement concrete M-25 (Design Mix) using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, and mass concrete, complete all as specified and directed. Note : Steel reinforcement bars and use and waste of form work shall be measured and paid separately. |
| 15 | Material and labour, reinforced cement concrete M-25 (Design Mix) using 20mm graded crushed stone aggregate as in columns, pillars, complete all as specified and directed.Note : Steel reinforcement bars and use and waste of form work shall be measured and paid separately. |
| 16 | Material and labour, reinforced cement concrete M-25 (Design Mix) using 20mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels, complete all as specified and directed.Note : Steel reinforcement bars and use and waste of form work shall be measured and paid separately. |
| 17 | Material and labour, reinforced cement concrete M-25 (Design Mix) using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.Note : Steel reinforcement bars and use and waste of form work shall be measured and paid separately. |
| 18 | Material and labour, pre-cast cement concrete block masonry with soild blocks type B1, 1:2:4 (20mm graded stone aggregate), exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed. |
| 19 | M & L moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and reammed including watering complete all as specified and directed. |
| 20 | Material and labour, hardcore of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, complete all as specified and directed. |
| 21 | Material and labour, hardcore of broken stone or boulders of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers exc. 15 cm thick, watered and rolled/rammed to a true surface, complete all as specified and directed. |
| 22 | Material and labour, 100mm thick cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in subbase of flooring, complete all as specified and directed. |
| 23 | Material and labour, 75mm thick cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in subbase of flooring, complete all as specified and directed. |
| 24 | Material and labour, for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 25 | Material and labour,Cement concrete 1:3:6 type C-1, Nominal Mix (using 20 mm graded crushed stone aggregate) as in copling, benching etc including necessary form work, complete all as specified and directed. |
| 26 | Material and labour, for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as speciofied anddirected |
| 27 | Supply and fix mild steel section for posts or struts including cutting tops to shape as directed drilling holes notching for wire etc. flat iron fillets (for securing wire mesh) including all necessary drilling , bolting etc and similar work conforming to Fe-410-0 complete all as speciofied anddirected |
| 28 | Material and labour, for prepainted galvalume aluminium zinc coating GI based plain sheet 0.50 mm thick complete all as specified and directed. |
| 29 | Providing and fixing Powder coated aluminium minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285,fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P.brass/ stainless steel screws,complete all as specified and directed. |
| 30 | Supply and fixSheet glass 5.5 mm thick, ordinary quality and glazing with beadings exc 0.5 sq. m in each pane complete all as specified anddirected. |
| 31 | Material and labour, for Glazed ceramic coloured tiles in vertical surface 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified anddirected. |
| 32 | Material and labour, 18 to 20mm thick kota stone slab flooring (mirror polished), over and including 20mm thick screed bed/ bedding layer in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of kota stone, complete all as specified and directed. |
| 33 | Material and labour, machine cut kota stone slab 16 to 18mm thick as in risers of steps, skirting, dado, pillar & the like, laid over and including 10mm thick backing in cement mortar (1:3), and set with grey cement slurry @ 3Kg/Sqm, jointed and pointed in neat cement slurry mixed with pigment including rubbing and polishing (Mirror finish), complete all as specified and directed. |
| 34 | Material and labour,plain cement concrete (1:3:6) type C-2 using 20mm graded crushed stone aggregate as in plinth protections, 75mm thick, finished fair and even without using extra cement, with 10mm wide joints to full depth @ 3m c/c and at corners, filled with mastic mortar, complete all as specified and directed. |
| 35 | Supply and fix, pressed steel frames for doors with one rebate, size of frame 105mmx60mm, including necessary fixing lugs, hinges, lock strick plate, etc,complete all as specified and directed. |
| 36 | Supply and fix, 35mm thick flush shutters, factory made, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 37 | Supply and fix, steel window with side hung shutter including projecting type hinges with steel handle and steel pegstay complete with glazing bars, dovetailed or welded as per specification, complete all as specified and directed. |
| 38 | Supply & fixing, Sheet glass 3mm thick, plain, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.50Sqm in each pane, complete all as specified and directed. |
| 39 | Supply and fix, butt hinges, stainless steel medium weight, with chromium plated brass screws, 100mm size, ISI marked, complete all as specified and directed. |
| 40 | Supply and fix, Aluminium handle,150mm size, fabricated type, anodised, complete all as specified and directed. |
| 41 | Supply and fix,Barrel tower bolts 150mm long, aluminium anodised,of extruded section and fixed, complete all as specified and directed. |
| 42 | Supply and fix, sliding door bolts 250mm long, of extruded sections aluminum alloy,anodized,with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminum, dia of bolt 12mm, complete all as specified and directed. |
| 43 | Supply and fix, aluminium drapery rod 28mm dia, ribbed, powder coated any shade, in pieces not exceeding 3m length, including set of fixing brackets, side ball finials and matching rings made from ABS plastics, fixed in repairs, complete all as specified and directed.Make:- AALISHAN - Ivory Pearl Interior Series or equivalent in Appx \"B\". |
| 44 | Supply and fix, particle board, 12mm thickness, grade 1 quality, exterior grade, medium density, flat pressed, BWR grade, prelaminated both sides with decorative type choice laminations as in pelmet boxes or in narrow widths fixed with screws, complete all as specified and directed. |
| 45 | Material and labour, rendering 15mm thick plaster on fair faces of brick walls or concrete surfaces in CM (1:4),in two layers i.e. 10mm in CM (1:6) and 5mm in CM 1:4) mixed with approved WPC as per manufecturer\"s instructions in 5mm layer only and finished fair & even without using extra cement, complete all as specified and directed.Note: WPC shall be measured and paid separately. |
| 46 | Supply only integral water proofing compound, complete all as specified and directed. |
| 47 | Material and labour,rendering 10mm thick plaster in cement mortar (1:4), on brick/concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed. |
| 48 | Material and labour, rendering 5mm thick in CM (1:3) as on ceiling, soffits of beams, chajjas, etc, finished even and smooth without using extra cement, complete all as specified and directed. |
| 49 | Material and labour, two coats of cement base cement base paint over a coat of alkali resistant primer including preparation ofplastered/ concrete surfaces, complete all as specified and directed. |
| 50 | Material and labour, for two coat of dry distemper over a coat of white wash incl preparation of newly plastered wall surfaces complete all as specified and directed. |
| 51 | Material and labour, preparation of newly plastered sufaces of ceiling and applying two coats of white wash, complete all as specified and as directed. |
| 52 | Material and labour, preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth, applying two coats of synthetic enamel paint over and including one coat of pink primer, complete all as specified and directed. |
| 53 | Material and labour, preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth, applying two coats of synthetic enamel paint over and including red oxide primer, complete all as specified and directed. |
| 54 | Material and labour, 10mm thickcement plaster in CM (1:4) mixed with WPC as per manufacturer’s instructions @ 3% by weight of cement on concrete surfaces, finished even and smooth without using extra cement, after applying neat cement slurry @ 3 Kg/Sqm, including preparing roof surface, complete all as specified and directed. |
| 55 | Material and labour, water proofing treatment of roof consisting as under:- (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30 litre/sqm including preparation of roof surfaces(b) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps & joints with flame (by torch application) all as per manufacturer’s instructions, complete all as specified and directed. |
| 56 | Supply and fix, GI tubing 15mm bore medium grade with necessary GI fittings and fixed complete to wall, or laid under floors, or fixed complete to wall/ceiling with clips, wall hooks and wooden plugs etc, complete all as specified and directed. |
| 57 | Supply and fix, GI tubing 20 mm bore medium grade with necessary GI fittings and fixed complete to wall/ceiling with clips, wall hooks and wooden plugs etc or laid in floors complete all as specified and directed. |
| 58 | Supply and fix, bib taps, cast copper alloy, fancy type, chromium plated,screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm dia bore, complete all as specified and directed. |
| 59 | PART-II E/M WORKSMaterial and labour for point wiring in steel conduit unsheathed multistrand copper conductor cable of 1.5 sqmm single core FRLS for one light/fan point controlled by one flame proof switch including continuouse earth continuity copper earth wire of same size connected to common earth dolly complete all as specified and directed .Note : (a) wiring shall be done by using proper colour coding. |
| 60 | All as per item No 59 here-in-above but using 2.5 sqmm wire for 15 Amps flame proof socket |
| 61 | Supply and fix, LED flameproof light fitting 1 x 20 Watts, CIMFR approved and recommended for gas/vapor group of IIA & IIB, Zone 1 & 2 and IP-65 protection with die cast aluminium housing with heat resistant toughned glass with LED tube light fixtures, driver, holder, connector etc. complete with all accessories pre-wired and including connecting up with three core flexible copper conductor wire of suitable size complete all as specified anddirected . |
| 62 | Supply and fix,flame proof switch socket & plug combination in LM6 cable termination box in LM6, 16 Amps, 250 volts, 2P + earth. Make : Sudhir Switchgears or equivalent |
| 63 | Supply and fix, flameproof exhaust fan of size 450mm sweep including louvers with IP-66 protection, complete with all accessories pre-wired and connecting up with twin core twisted flexible copper conductor wire of suitable size complete all as specified anddirected |
| 64 | Supply and fix, Switch flame proof rotary type with termination box in LM6, 16 Amps, single pole 250 volts.Make : Sudhir Switchgears or equivalent |
| 65 | Supply and fix, ceiling rose Bakelite white/black coloured ofsize 25x50mm two to three terminals, complete all as specified and as directed. |
| 66 | Supply and fix, Flame proof SPN DB 8 way 240 V having200 A rated bus bars with 32 Amps SPN MCB-01 No and 16-32 Amps SP MCB\"s - 06 Nos complete all as specified and directed . Make : Sudhir Switchgears or equivalent. |
| 67 | Supply, laying, jointing, testing and commissioning of Low Tension (LT)XLPEinsulated, armoured, heavy duty, electric power cable, cross sectional area 16Sqmm 2core aluminum conductor 1100volts grade under ground cable including both side connection with cable lugs etc, laid in trenches, alongpolesorpassing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note(s):Excavation & earth work, sand cushioning and PCC cover for protection of cable shall be measured and paid separately. |
| 68 | Supply and laying / fixing , GI pipe light grade 40mm dia bore for cable protection fixed to pole/wall or laid under floor/road/pavement, complete all as specified and directed.Note (s) : (i) MS clamps, nuts, bolts etc where required shall be measured and paid separately.(ii) Cutting road etc. shall be measured and paid separately. |
| 69 | Material and labour, sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts, complete all as specified and directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment. |
| 70 | Supplying and laying,factory made unreinforced precast concrete cable cover LV type-1, flat, of size 250x150x40mm, laid flat and dryin trenches over the cable for protection, length perpendicular to the direction of cable adjacent to each other, complete all as specified and directed. |
| 71 | Material and labour for copper strip of 20mm x 3.0mm with screws/ washers etc. over PVC saddles/spacers on wall and roof of building complete all as specified anddirected .Note : Max distance between spacers/saddles is 0.5 mtr |
| 72 | Material and labour for air termination, single pointed, copper rod 12 mm dia and 300mm long screwed properly on copper strip complete all as specified anddirected |
| 73 | Material and labour for test point terminal block made out of gun metal or phosphorus bronze size 75 x 75 x 25mm drilled and screwed including 3 Nos 8mm dia 25 mm long hax. head screw complete all as specified anddirected . |
| 74 | Material and labour for maintenance free chemical earthing system complete with one No UL 464 approvrd copper bonded earth rod 17mm dia , 3.0 metre long electrode burried in ground to bore of 150mm dia , Vertically to a depth not less than 0.5 metre below normal ground level including provision to connect the earth continuity conductor with copper bonded earth rod as per manufacturer design or all as directed including 60 Kg NABLLAB certified back fill chemical compound for filling bore holes with Min 6.0 Kg of Hygroscopic Gel. The ground enhancement chemical may be used in place of back fill compound as required and manufacturer recommendation to obtain 1.0 Ohms earth resistance value. A layer of 250-300 mm soil ( Vegitable / Cotton soil) is also required out side earth bore including necessary ingredients and water during process to obtain desired value . The earthingcopper strip of 20x3.0 mm up to length 7.5 metre upto test point from copper rod is also included. The scope included iron frame of size 20x20 mm fixed with hinged with pit cover of 300 x300mm made of cast iron as per company standaradshall be as recommanded by manufacturer complete all as specified : Make;-JMV / Pargati electrocom / Enove/MarconiteNote:-(i) Payment shall be made only after satisfactory testing to the entire satisfaction of GE. The contractor has made alternate earthing in case test result not found satisfactory without extra cost to the Govt quoted rates shall be deemed to included.(ii) Contractor shall submit two year guarantee for earth resistance below 2.0 Ohms and raeth neutral voltage less than that 2.0 volts. |
