|
| 1 | Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Removing excavated material exc 250 m but not exc 500 m and depositing where directed at a level not exc 1.5 m above the base as in soil complete all as specified and directed. |
| 3 | Returning, filling in soil including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified & directed. |
| 4 | M & L for moorum/ red bajri filling in floors or pavings, laid in layers not exc.15 cm thick spread, levelled and rammed including watering complete all as specified and directed. |
| 5 | M & L for hardcore of broken boulders of gauge not exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 6 | M & L for plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation & filling in mass concrete complete all as specified and directed. |
| 7 | M & L for non skid ceramic coloured joint free tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm,in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles including screed bed or bedding layer 15 mm thick in cement mortar (1:4) for laying floor finishes complete all as specified and directed. |
| 8 | M & L for glazed coloured ceramic tiles 300 x 200 x 7 mm thick on vertical surfaces such as skirting dados and risers to steps etc and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and directed. |
| 9 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown in SSR complete all as specified and directed. |
| 10 | S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitabe PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifiction & drawing complete all as specified and directed. |
| 11 | S & F butt hinges medium weight cold rolled mild steel 100 mm long complete all as specified and directed. |
| 12 | S & F aluminium anodised barrel tower bolts of extruded section 100 mm long complete all as specified and directed. |
| 13 | S & F aluminium alloy, anodised, sliding door bolt with hasp, staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 250 mm long complete all as specified and directed. |
| 14 | S & F aluminium alloy anodised handle, cast type 100 mm long complete all as specified and directed. |
| 15 | M & L for providing precast cement concrete solid building blocks masonry exc 10 cm width, type C1,1:3:6 (20 mm graded aggregate) set in cement mortar 1:6 complete all as specified and directed. |
| 16 | M & L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed. |
| 17 | M & L for rendering 15 mm thick plaster in CM 1:4 in two coats (10 mm thick backing coat + 5 mm thick finishing coat) on concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and directed. |
| 18 | M & L for preparation of new plastered surfacesof walls and applying two coats of acrylic washable distemper incl 1 mm thick wall care putty to obtain smooth regular even finish using sand paper etc all as specified and directed. |
| 19 | M & L for preparation of new plastered surfaces of walls of any description including and applying two coats of weather proof exterior emulsion paint over a coat of primer complete all as specified and directed. |
| 20 | M & L for cement concrete (1:3:6)type C-1, using 20 mm graded stone aggregate as in coping etc. including necessary formwork including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 21 | M & L for providing 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded aggregate as in plinth protection and finishing the concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 22 | S & F for 10 mm thick PVC insulation panels with EPS stuck to 1 mm plain PVC sheet suitably placed in false ceiling grid made of aluminium of Size 600 x 600 mm complete all as specified and directed. |
| 23 | S & F anodised aluminium snap grid frame work for false ceiling Tee of size 24 x 28.5 mm made out of PGI sheet 0.3 mm thick double at web and single at flange, flange covered with powder coated sheet 0.25 mm thick and wall angle 24 x 24 x 0.45 mm powder coated for ceiling complete all as specified and directed. |
| 24 | S & F hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long complete all as specified and directed. |
| 25 | S & F for powder coated aluminium frame for door, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 26 | S & F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.NOTE: The unit rate quoted excludes the cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose. |
| 27 | S & F 4 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 28 | S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 29 | S & F Aluminium body, door closer, hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed. |
| 30 | S & F Steel work in tubular trusses, purlins, rafter etc. including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS: 1161-1979 grade St.- 240 complete all as specified and directed. |
| 31 | M & L for pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 MPa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 32 | M & L for pre-painted galvalume aluminium zinc coated GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 MPa as in roof covering/ ridge/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 33 | M & L for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of new steel surfaces of any description exc 10 cm in width or girth complete all as specified and directed. |
| 34 | S & F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed in any position complete all as specified and directed. |
| 35 | S & F 110 mm dia PVC (SWR) bends all as specified and directed. |
| 36 | S & F 75 mm bore PVC (SWR) waste and vent pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed. |
| 37 | S & F 75 mm bore PVC(SWR) bends of any radius complete all as specified and directed. |
| 38 | S & F brass chromium plated health faucet with spring pipe complete all as speified and directed. MAKE: Jaquar Cat No ALD-CHR-585 or equivalent as specified in list of makes. |
| 39 | S & F vitreous china urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe all as specified and directed. |
| 40 | M & L for PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and directed. |
| 41 | S & F75 mm dia PVC (SWR) floor trap plain, with grating including jointing with solvent cement all as specified and directed. |
| 42 | S & F vitreous china squatting pan, ‘Orissa’ pattern, size 630 x 450 mm white, with integral foot rest water closetetc complete all as specified and directed. |
| 43 | S & F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements incl MS brackets and connecting to water pipe and WC etc complete all as specified. |
| 44 | S & F wash hand basin, flat back 550 x 400 mm vitreous china (white) including PTMT waste fittings, 32 mm bore size, waste pipe, PVC, 32 mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing surface complete all as specified. |
| 45 | S & F 32 mm bore PVC waste pipe with fittings of approved make suitable for WHB, urinals etc complete all as specified and directed. |
| 46 | S & F grating doom 125 mm dia with waste hole of PTMT (minium weight 40 gms) for Nahani trap all as specified and directed. |
| 47 | S & F stop valves cast copper alloy fancy type chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15 mm bore all as specified and directed. |
| 48 | S & F PVC connection 15 mm dia with brass nut on both ends and washers 450 mm long complete all as specified and directed. |
| 49 | S & F Pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered (Hot or cold) with long screwed shanks and fly nuts screwed for iron pipes 15 mm dia all as specified. |
| 50 | S & F bib taps, cast copper alloy fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe15 mm bore all as specified and directed. |
| 51 | S & F PVC Rotational moulded polyethylene water storage tanks triple layered of capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 52 | S & F Gun-metal globe or gate valves, with iron wheel head screwed both ends for 15 mm iron pipe & fixed, complete all as specified and as directed. |
| 53 | S & F Gun-metal globe or gate valves, with iron wheel head screwed both ends for 20 mm iron pipe & fixed, complete all as specified and as directed. |
| 54 | S & F Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for 20 mm dia iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 55 | S & F UPVC pipes of pressure rating 10 Kgf/Cm² 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in trenches/floor etc complete all as specified and directed. |
| 56 | S & F UPVC pipes of pressure rating 10 Kgf/Cm²20 mm bore with all fittings and fixed complete to walls and ceiling or laid in trenches/floor etc complete all as specified and directed. |
| 57 | S & F 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cap washers all as specified anddirected. |
| 58 | S & F towel rail, 19 mm dia brass chromium plated, 600 mm long with fancy type brass chromium plated brackets on both sides and fixed with steel screws and wooden/rawl plugs, complete all as specified. |
| 59 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing all the rubbish as directed by Engineer-in-charge complete all as specified and directed. |
| 60 | Taking down wooden/ PVC/ FRP chowkats or frames with shutters (without taking off shutter from the frame ), area exc 1.5 Sqm but not exc 4 Sqm each including making good disturbed portion to match with adjoining surfaces and offering credit as per schedule of credit all as specified and directed. |
| 61 | Demolition of stone/ boulder masonry built in cement mortar, complete all as specified and as directed. |
| 62 | M & L for preparation of newly plastered surfaces of walls any description and applying two coats of distemper oil emulsion over a coat of primer all as specified and directed. |
| 63 | S & F vitreous china wash down water closet (pedestal pattern) white, including fixing bolts and necessary connection with existing pipes etc complete all as specified and directed. NOTE: Quoted rate shall exclude the cost of flush pipe, cistern & seat cover and the same shall be paid seperately under respective items. |
| 64 | S & F plastic water closet seat and cover, white, closed pattern with flat bottom suitable for pedestal/ Semi pedestal pattern water closets and mild steel chromium plated or aluminized hinging device complete all as directed. |
| 65 | Demolition of precast concrete block walling built in cement mortar and removal of debris ousite the MD land complete all as specified and directed. |
| 66 | Demolition of concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 67 | M & L for plain cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 68 | M & L for preparation of new plastered surfaces of walls of any description including and applying two coats of cement based paint complete all as specified and directed. |
| 69 | M & L for excavating in post holes (or similar holes) each not exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/ dense soil complete all as specified. |
| 70 | M & L for RCC in post and struss type B1 1:2:4 (20 mm graded aggregate) all as specified and as directed. |
| 71 | M & L for point wiring complete with 1.5 Sqmm two single core PVC insulated sheathed 1100 volts grade cable with multi stranded copper conductor FR grade conforming to IS-694 Part II with ISI mark FR grade drawn through and including suitable size rigid non metallic PVC conduit concealed with all accessories, including suitable size sunken pressed steel or cast iron terminal box with 3 mm thick plastic laminated sheet cover fixed flush with wall surface by means of brass screw and sunk cup washers for mounting of switches, sockets, fan regulators etc. including providing 1.5 Sqmm PVC insulated sheathed multi stranded copper conductor cable as earth wire connected to metallic bodies of luminaires/fan etc at one end and to common earth dolly at other end for fan/light point complete all as specified and directed. |
| 72 | Description all as per item No. 71.00 above but for one 5 Amps socket point on independent board. |
| 73 | Description all as per item No. 71.00 above but with cables 2.5 Sqmm for one 3 pin socket outlet 15 Amps on independent board. |
| 74 | M & L for sub main wiring with proper colour coding, FRLS PVC insulated copper conductor, unsheathed, multi-stranded cable 4 Sqmm three runs, one run for each (phase, neutral and earth wire), drawn through and including PVC conduit with all accessories and junction box fixed in wall/ceiling etc complete all as specified and directed by Engr-in-Charge.NOTE- Phase should be of Red/Yellow/Blue, neutral should be of black and earthing wire should be of green colour. Two runs of cable for phase/ neutral and one run of cable for earth will be measured and paid as one unit length. |
| 75 | S & F switch piano 6 Amps one way flush type complete all as specified and directed. |
| 76 | S & F switch socket combination2 in 1, 6 Amps, 5 pin, flush type complete all as specified and directed. |
| 77 | S & F switch socket combination 2 in 1, 3 pin,6 and 16 Amp, flush type universal complete all as specified and directed. |
| 78 | S & F ceiling rose surface bakelite 65 x 50 mm three terminal on and including PVC junction box of suitable size completeall as specified and directed. |
| 79 | S & F LED light fitting 1x18 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 80 | S & F exhaust fan AC single phase 230 V of size 300 mm, 1400 RPM (steel body) with louvers shutter grey colour and connected with flexible cord of size 23/0.0076 stranded copper conductor PVC insulated of length not less than 0.7 m complete all as specified and directed. |
| 81 | S & F MCB DB SPN, 4 way, 240 Volt, double door powder coated sheet steel enclosure for surface mounting fitted with 200 Amps bus bar and din channel complete all as specified and directed. |
| 82 | S & F MCB SPN, 32Amps, 240 Volts, 10 KA, \"C\" Curve capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 83 | S & F MCB SP, 5 to 32Amps, 240 Volts, 10 KA, \"C\" Curve capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 84 | S & F lamp holder, insulated body, with back plate for batten fitting with LED lamp 9 W complete all as specified and directed. |
