Haryana Police Housing Corporation Limited has published Up-Gradation Of Barracks In Cid Commando Training Centre, Village Chowki, Panchkula Up-Gradation Of Barracks In Cid Commando Training Centre, Village Chowki, Panchkula. Submission Date for this Tender is 03-03-2022. Barrack Tenders in panchkula Haryana. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5m, as directed by Engineer-in-charge. HSR 4.12 |
| 2 | 4.14.1 All kinds of soil. |
| 3 | Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-incharge:HSR 5.1 |
| 4 | 5.1.2 In cement mortar |
| 5 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. HSR 5.7 |
| 6 | 5.7.4 In cement mortar |
| 7 | Demolishing mud phaska in terracing and disposal of material within 50 metres lead.HSR 5.11 |
| 8 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. HSR 5.23 |
| 9 | 5.23.1 Nominal concrete 1: 1.5:3 or richer mix (i/c equivalent) design mix) |
| 10 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.HSR 5.45 |
| 11 | Disposal of building rubbish / malba / similar unserviceable,dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.HSR 5.70 |
| 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: HSR 6.1 |
| 13 | 6.1.1 1 : 1 ½: 3 ( 1 Cement: 1 ½ coarse sand (zone-Ill) : 3 graded stone aggregate 20 mm nominal size) |
| 14 | 6.1.6 1 :4: 8 (1 Cement : 4 coarse sand (zone-Ill) : 8 graded stone aggregate 40 mm nominal size) |
| 15 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level: HSR 6.14 |
| 16 | 6.14.1 1 : 1. 5: 3 ( 1 cement : 1. 5 coarse sand (zone-Ill): 3 graded stone aggregate 20 mm nominal size) |
| 17 | Reinforced cement concrete work in beams, suspended floors,roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-111) : 3 graded stone aggregate 20 mm nominal size).HSR 6.16 |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form forHSR 6.30 |
| 19 | 6.30.1 Foundations, footings, bases of columns, etc. formass concrete |
| 20 | 6.30.2 Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 21 | Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect above plinth level. Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. HSR 6.34 |
| 22 | 6.34.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 23 | Brick work with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : HSR 7.22 |
| 24 | 7.22.1 Cement mortar 1:4 (1 cement: 4 coarse sand) |
| 25 | 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1: 1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1: 3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat:HSR 9.11 |
| 26 | 9.11.1 With common burnt clay non-modular brick tile of class designation 10 |
| 27 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5 x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. HSR 9.33 |
| 28 | Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. HSR 9.57 |
| 29 | 9.57.2 110 mm diameter |
| 30 | Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.HSR 9.589.58.5 Bend 87.5° |
| 31 | 9.58.5.2 110 mm bend |
| 32 | Providing and laying of conglomerate floor 50mm thick cement concrete topping 1 :2:4 HSR 10.7 |
| 33 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1 :3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.HSR 10.58 |
| 34 | Cement Concrete 1 :8:16 Flooring HSR 10.100 |
| 35 | 10.100.2 Cement Concrete 1:8:16 with stone aggregate 40 mm size in foundation and plinth. |
| 36 | Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1 :4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.HSR 10.106 |
| 37 | 12 mm cement plaster of mix : HSR 11.5 |
| 38 | 11.5.3 1 :4 (1 cement: 4 fine sand) |
| 39 | 12 mm cement plaster of mixHSR 11.8 |
| 40 | 1.8.1 1 :4 (1 cement: 4 coarse sand) |
| 41 | Providing and applying two coats white cement based putty of approvedbrand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. completeHSR 11.58 |
| 42 | Applying priming coat: HSR 11.68 |
| 43 | 11.68.3 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 44 | Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete.HSR 11.76 |
| 45 | Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc.HSR 11.77 |
| 46 | Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. HSR 11.78 |
| 47 | Painting the wooden / metal surface with synthetic enamel paint of approved brand and manufacture to give an even shadeHSR 11.82 |
| 48 | 11.82.1 Two or more coats on new work |
| 49 | Finishing walls with Acrylic Smooth exterior paint of required shade :HSR 11.95 |
| 50 | 11.95.1 New work (Two or more coat applied @ 1.67 litre / 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 51 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:HSR 12.9 |
| 52 | 12.9.7 Float glass panes |
| 53 | 12.9.7.1 4 mm thick glass pane (weight not less than sqm 10kg/sqm). |
| 54 | Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.HSR 12.36 |
| 55 | 12.36.3 25 mm thick (for cupboard) including ISi marked nickel plated bright finished M.S. Piano hinges IS 3818 marked with necessary screws |
| 56 | 12.36.1 35 mm thick including ISi marked Stainless Steel butt hinges with necessary screws |
| 57 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M .S. Flat 15x3 mm and nuts & bolts complete.HSR 13.9 |
| 58 | 13.9.2 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides |
| 59 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete withHSR 13.10 |
| 60 | 13.10.1 4.0 mm thick glass panes |
| 61 | Providing and fixing hard drawn steel wire fabric 75 mm X 25 mm rectangular mesh with 3.25 mm dia wire fixed on steel windows of standard rolled sections with 3 mm thick flat iron cover moulding of 12.5 mm width fixed with machine screws welded complete in all respect.HSR 13.18 |
| 62 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. HSR 13.29 |
| 63 | 13.29.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 64 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. HSR 13.30 |
| 65 | 13.30.1 Hot finished welded type tubes |
| 66 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:HSR 22.1 |
| 67 | 22.1.4 White vitreous chinaware Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 68 | Providing and fixing white vitreous chinaware pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.HSR 22.5 |
| 69 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.HSR 22.14 |
| 70 | 22.14.2 Flexible pipe |
| 71 | 22.14.2.2 40 mm dia |
| 72 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:HSR 22.22 |
| 73 | 22.22.1 White vitreous chinaware Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 74 | Providing and fixing white vitreous chinaware pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinaware flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :HSR 22.24 |
| 75 | 22.24.1 W.C. pan with ISi marked white solid plastic seat and lid |
| 76 | Providing and fixing white vitreous chinaware flat back or wall comer type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:HSR 22.25 |
| 77 | 22.25.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 78 | Providing and fixing partitions for different type of urinals.HSR 22.50 |
| 79 | 22.50.1.2 Large size 835mm x 355 mm |
| 80 | 22.50.1.2.1 White |
| 81 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.HSR 22.86 |
| 82 | Concealed work, including cutting chases and making good the walls etc. |
| 83 | 22.86.1 15 mm nominal outer dia Pipes |
| 84 | 22.86.2 20 mm nominal outer dia Pipes |
| 85 | 22.86.3 25 mm nominal outer dia Pipes |
| 86 | 22.86.4 32 mm nominal outer dia Pipes |
| 87 | Providing and fixing brass stop cock of approved quality:HSR 22.97 |
| 88 | 22.97 .1 15 mm nominal bore |
| 89 | Providing and fixing Unplasticised PVC connection pipe with brass unions:HSR 22.101 |
| 90 | 22.101.1 30 cm length |
| 91 | 22.101.1.1 15 mm nominal bore |
| 92 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : HSR 22.103 |
| 93 | 22.103.2 20 mm nominal bore |
| 94 | 22.103.3 25 mm nominal bore |
| 95 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931HSR 22.104 |
| 96 | 22.104.1 15 mm nominal bore |
| 97 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. HSR 22.106 |
| 98 | 22.106.1 15 mm nominal bore |
| 99 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. HSR 22.109 |
| 100 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.HSR 22.118 |
| 101 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. HSR 22.119 |
| 102 | 22.119.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 103 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. HSR 22.127 |
| 104 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.HSR 22.181 |
| 105 | 6x1000 Ltr. Capacity |
| 106 | 2x500 Ltr. Capacity |
| 107 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.HSR 22.209 |
| 108 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement sluny mixed with water proofing cement compound consisting of applying HSR 28.15 (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/ sqm This layer will be allowed to air cure for 4 hours. (b) Second layer of sluny of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 109 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete HSR 30.21 |
| 110 | Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. HSR 30.24 |
| 111 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade HSR 30.28 |
| 112 | 30.28.1 One or more coats on old work |
| 113 | Finishing walls with water proofing cement paint of required shade: |
| 114 | 30.35.1 Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litres/10 sqm complete including cost of Priming coat. HSR 30.35 |
| 115 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.HSR 22.222 |
| 116 | 22.222.2 Single Socket Type B |
| 117 | 22.222.2.2 110mm old SWR UPVC pipe lines laid complete |
| 118 | 22.222.2.3 90mm old SWR UPVC pipe lines laid complete |
| 119 | Total HSR |
| 120 | NS ITEMS |
| 121 | Providing & fixingin position CP jali of Heavy quality, 100mm dia of standard make approved by engineer in-charge complete in all respect.(Viking make) |
| 122 | Providing,fixing and jointing CPVC union couplings in CPVC pipelines complete in all respect. |
| 123 | 15 mm dia |
| 124 | 20 mm dia |
| 125 | 25 mm dia |
| 126 | 32 mm dia |
| 127 | Providing, fixing and jointing of CPVC Gate valve on CPVC pipelines complete in all respect. |
| 128 | 15 mm dia |
| 129 | 20 mm dia |
| 130 | 25 mm dia |
| 131 | 32 mm dia |
| 132 | Providing and fixing SWR PVC type B class pipe fittings complete with necessary solvent complerte in all respect. |
| 133 | 110 mm dia |
| 134 | i) Bend 110mm dia |
| 135 | iii) Single junction |
| 136 | iii) Socket 110 mm dia |
| 137 | 90 mm dia |
| 138 | i) Bend 90mm dia |
| 139 | ii) Socket 90 mm dia |
| 140 | iii) Single junction |
| 141 | iii) Floor trap |
| 142 | Total NS Items |
| 143 | Credit of Old dismantled material |
| 144 | Taking 70% of good bricks |
| 145 | Taking 30% of Brick bats |
| 146 | Total B |
| 147 | E.I HSR |
| 148 | Supply, erection, testing of Ceiling fans IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge (HSR 20.71.) |
| 149 | 20.71.1)48" (1200mm) |
| 150 | 20.71.2)56" (1400mm) |
| 151 | Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe (HSR 23.4.1.) |
| 152 | 23.4.1.1) Group A |
| 153 | Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required( 23.4.4.) |
| 154 | 23.4.4.1) Group A |
| 155 | Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required. |
| 156 | 23.4.5.1) Group A |
| 157 | Wiring only in 1.5 sqmm PVC insulated copper conductor cable for LIGHT/FAN/Call bell point in existing conduit pipe and MS boxes including cost of Bakelite cover for MS box, switch, wall socket, ceiling rose/connector etc. (HSR 23.5.1.) |
| 158 | 23.5.1.1) Group A |
| 159 | Wiring in existing conduit and MS box for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin socket and 1 no 5/6 Amp switch etc complete as required(HSR 23.5.4.) |
| 160 | 23.5.4.1) Group A |
| 161 | Wiring in existing conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling, including providing 1 no 15/16 Amp 3/6 pin socket and 1 no 15/16 Amp switch etc complete as required. |
| 162 | 23.5.5.1) Group A |
| 163 | Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated copper conductor cable 1100 volts grade in existing MS/PVC conduit etc as required. (HSR 23.5.6.) |
| 164 | 23.5.6.1.)1 run of size 1.50sqmm (1/1.40mm) |
| 165 | 23.5.6.2.) 1 run of size 2.50sqmm (1/1.80mm) |
| 166 | 23.5.6.3.) 1 run of size 4sqmm (1/2.24mm) |
| 167 | Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect.(HSR 23.8.1.) |
| 168 | 23.8.1.12 Bakelite angle/straight button holder large size. |
| 169 | Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects.(HSR 23.8.10.) |
| 170 | 23.8.10.1) 1 & 2 Modules including combined plate for Telephone and data |
| 171 | 23.8.10.2) 3 Modules |
| 172 | 23.8.10.3) 4 Modules |
| 173 | 23.8.10.4) 6 Modules |
| 174 | 23.8.10.5) 8 Modules |
| 175 | 23.8.10.6) 12 Modules |
| 176 | Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect.(HSR 23.8.11.) |
| 177 | 23.8.11.1.) 5 amp 1 way switch |
| 178 | 23.8.11.4.) 5 amp socket |
| 179 | 23.8.11.3.)15 amp 1 way switch |
| 180 | 23.8.11.5.)15 amp 6 pin socket |
| 181 | 23.8.11.10.) Blinking plate |
| 182 | 23.8.11.7.) step type Fan regulator 2 modules 300 watt |
| 183 | 23.8.11.8) Telephone Socket outlet modular type |
| 184 | 23.8.11.11) RJ 45 Computer DATA socket outlet for CAT 6 or CAT6e cable Modular type |
| 185 | Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work.(HSR 23.22.1.) |
| 186 | 23.22.1.9) 4 pole MCCB 6 amp to 100 amp , 25 KA |
| 187 | 23.22.1.10) 4 pole MCCB 125 to 160 amp, 25 KA |
| 188 | Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work (HSR 23.22.4.) |
| 189 | 23.22.4.11)vertical TPN DB Double Door 8 way ( 8 incoming and 3 PHASE* 8 outgoing |
| 190 | Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- (HSR 23.22.5.) |
| 191 | 23.22.5.1) 6 amp. to 32 amp Single Pole |
| 192 | 23.22.5.6) 40 amp to 63 amp. MCB"s TRIPLE POLE |
| 193 | Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/channel and making necessary connection complete in all respect up to the entire satisfaction of the Engineer-in charge of the work. (HSR 23.23.8..) |
| 194 | 23.23.8.1) 2 pair telephone wire |
| 195 | Supplying and drawing of 1 no UTP 4 pair CAT 6 LAN Cable in the existing surface/recess MS/PVC conduit as required (HSR 23.23.9.) |
| 196 | Earthing and lightening arrestor (HSR 24.1.) |
| 197 | 24.1.1.)Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. |
| 198 | 24.1.2.) Extra for using salt and char coal/coke for pipe earth electrode as required. |
| 199 | 24.1.4.)Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. |
| 200 | 24.1.5.) Extra for charcoal or coke and salt for G.I plate or copper plate earth electrode. |
| 201 | 24.1.9.)Providing and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required. |
| 202 | 24.1.10.) Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required with all labour and material. |
| 203 | Laying of underground cable in pipe /existing open/closed trench etc as (HSR 24.2.4.) |
| 204 | 24.2.4.1)2.5 Sq mm to 10 Sq mm 2 to 4 Core |
| 205 | 24.2.4.3) 16 Sq mm to 35 sqmm 2 to 4 Core |
| 206 | Total (HSR + CP ) Amount |
| 207 | NS Items |
| 208 | S/E PVC pipe ISI Marked heavy guage i/c bendinspection box etc., i/c laying of pipe in slab or wall complete with all patty material required to complete the job in all respect.(Recessed type) |
| 209 | ii)Size 25 mm dia (Recessed Type) |
| 210 | ii)Size 25 mm dia (Surface type) |
| 211 | Surface & Erection of surface mountingLED Batten fitting 1 x18 watt, (4 feet long) made of high grade poly carbonate body provided for efficent heat dissipation & integrated electronic driver suitable for single phase A.C. 230 volts , 50 Hz supply complete in all respect. Make as per brand list. |
| 212 | S/E of ISI marked propeller type ventilating fans (Exhaust fan) suitable for single phase230 Volt, 50 Hz AC, capacitor runcomplete with mounting rings with four no. fixing holes without regulator as per following specification under general technical requirements C.G model heavy duty or havells turboforce |
| 213 | 1. sweep = 300 mm |
| 214 | S/E of louver shutter for exhaust fan including all labour comlete in all respect. |
| 215 | S/E of Exhaust fan PVC body 250 mm outer with louver shutter and petty material required to complete the job in all respect. CG Model Brisk air or Havells ventilair DX |
| 216 | Supply and erection of energy efficent LED 6000 K Round Luminiare complete with diffuser, energy efficent electronic driver and other material required required to complete the job including fixing the same in false ceiling with required material& making necessaryconnection etc: |
| 217 | i) LED 33/34/36 W surface mounting2"x2" |
| 218 | S/E of LED Flood light 50 watt suitable for operation on 230 Volts A.C. Supply |
| 219 | Supply and erection of M.K accessories complete in all respect. (white colour) |
| 220 | i) PVC Commercial dado trunking of size 100mm x 50 mm NCT 1050 |
| 221 | Supply and erection of Vertical double door sheet enclosure distributiuon board (IP43) suitbale for MCCB as incomer recessed in wall including bonding to earth with all labourand material reqquired to complete the job in all respect upto the entire satifaction of the Engineer in charge of the work. |
| 222 | b) 8 way TPN (vertical , CCB provision as Incomer and provision for 24 No. 6-32 amp MCB SP as outgoings) |
| 223 | Supply of LT armoured/ Unarmoured cable of following 1100 Volt and complete with making necessary connection of cable on both ends including loading, unloading and carriage with all labour and petty material required to complete the job upto the entire satisfaction of Engineer-in-Chargre of the work. |
| 224 | 1) LT unarmoured cable of size 10sqmm 2 core |
| 225 | 1) LT armoured cable of size 35sqmm 4 core |
| 226 | Total NS |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
