Department Of Municipal Administration-DOMA has published Annual Tender For Supply Of Various Materials To N.P. Ardhapur Water Supply Works Annual Tender For Supply Of Various Materials To N.P. Ardhapur Water Supply Works , Water Supply Departmental Material Supply , Epoxy Paint , Red Oxide Paint , Lubricant. Submission Date for this Tender is 09-03-2022. Bolts Tenders in ardhapur Maharashtra. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | WATER SUPPLY DEPARTMENTAL Material Supply |
2 | Epoxy paint |
3 | Red Oxide Paint |
4 | Lubricant oil |
5 | Cement (Bags) |
6 | Mobile oil |
7 | Supplying and topping up filtered transformer oil of approved make as per PWD Electrical CSR 2019-20 |
8 | Nut bolts |
9 | Rubber gasket ( 6 mm thick ) |
10 | Grease |
11 | Black enemal paint Anti corrosive |
12 | White lead (????) |
13 | Mediclor |
14 | lock |
15 | brush |
16 | channi |
17 | torch chargeble |
18 | handgloves |
19 | Mediclor |
20 | OT Solution |
21 | PPM Kit |
22 | Nylon Rope |
23 | Rubber Patch |
24 | ISI mark rigid unplasticised PVC pipes |
25 | Working Pressure 4 Kg/cm² |
26 | 20 mm |
27 | 25 mm |
28 | 32 mm |
29 | 63 mm |
30 | 75 mm |
31 | 90 mm |
32 | 110 mm |
33 | P.V.C. Pipe Specials |
34 | Coupler 4 Kg/cm2 |
35 | 20 mm |
36 | 25 mm |
37 | 32 mm |
38 | 63 mm |
39 | 75 mm |
40 | 90 mm |
41 | 110 mm |
42 | P.V.C. Tee |
43 | 20 x 20 x 20 mm. dia. |
44 | 25 x 25 x 25 mm. dia. |
45 | 32 x 32 x 32 mm. dia. |
46 | 63 x 63 x 63 mm. dia. |
47 | 75 x 75 x 75 mm. dia. |
48 | 90 x 90 x 90 mm. dia. |
49 | 110 x 110 x 90 mm. dia. |
50 | 110 x 110 x 110 mm. dia. |
51 | PVC Reducer |
52 | 25 x 20 mm dia. |
53 | 32 x 25 mm. dia. |
54 | 63 x 32 mm. dia. |
55 | 75 x 63 mm. dia. |
56 | 90 x 75 mm. dia. |
57 | 110 x 90 mm. dia. |
58 | PVC Elbow 90 deg, |
59 | 20 mm |
60 | 25 mm |
61 | 32 mm |
62 | 63 mm |
63 | 75 mm |
64 | 90 mm |
65 | 110 mm |
66 | PVC Elbow/ Bend 45 deg, |
67 | 20 mm |
68 | 25 mm |
69 | 32 mm |
70 | 63 mm |
71 | 75 mm |
72 | 90 mm |
73 | 110 mm |
74 | PVC Service Saddle |
75 | 63 mm |
76 | 75 mm |
77 | 90 mm |
78 | 110 mm |
79 | PVC Endcap |
80 | 20 mm |
81 | 25 mm |
82 | 32 mm |
83 | 63 mm |
84 | 75 mm |
85 | 90 mm |
86 | 110 mm |
87 | PVC Male Adaptet (MTA) |
88 | 20 mm |
89 | 32 mm |
90 | 63 mm |
91 | 75 mm |
92 | 90 mm |
93 | 110 mm |
94 | PVC Female Adaptet (FTA) |
95 | 20 mm |
96 | 32 mm |
97 | 63 mm |
98 | 75 mm |
99 | 90 mm |
100 | 110 mm |
101 | PVC Talepiece |
102 | 63 mm |
103 | 75 mm |
104 | 90 mm |
105 | 110 mm |
106 | uPVC pipes |
107 | 15 mm |
108 | 20 mm |
109 | 25 mm |
110 | 32 mm |
111 | 50 mm |
112 | uPVC Pipe Specials |
113 | uPVC Coupler |
114 | 15 mm |
115 | 20 mm |
116 | 25 mm |
117 | 32 mm |
118 | 50 mm |
119 | uP.V.C. Tee |
120 | 15 mm |
121 | 20 mm |
122 | 25 mm |
123 | 32 mm |
124 | 50 mm |
125 | uPVC Reducer |
126 | 20 x 15 mm |
127 | 25 x 20 mm |
128 | 32 x 25 mm |
129 | 40 x 32 mm |
130 | 50 x 40 mm |
131 | uPVC Elbow 90 deg, |
132 | 15 mm |
133 | 20 mm |
134 | 25 mm |
135 | 32 mm |
136 | 50 mm |
137 | uPVC Brass Elbow 90 deg, |
138 | 15 mm |
139 | 20 mm |
140 | 25 mm |
141 | 32 mm |
142 | 50 mm |
143 | uPVC Endcap |
144 | 15 mm |
145 | 20 mm |
146 | 25 mm |
147 | 32 mm |
148 | 40 mm |
149 | 50 mm |
150 | uPVC Male Adaptet (MTA) |
151 | 15 mm |
152 | 20 mm |
153 | 25 mm |
154 | 32 mm |
155 | 40 mm |
156 | 50 mm |
157 | uPVC Female Adaptet (FTA) |
158 | 15 mm |
159 | 20 mm |
160 | 25 mm |
161 | 32 mm |
162 | 40 mm |
163 | 50 mm |
164 | uPVC Union |
165 | 15 mm |
166 | 20 mm |
167 | 25 mm |
168 | 32 mm |
169 | 40 mm |
170 | 50 mm |
171 | uPVC Solution |
172 | PVC Solution |
173 | Hacksaw Blade |
174 | Hacksaw Blade Frame |
175 | PVC Garden Pipe |
176 | 3/4" (20 mm) |
177 | 1" (25 mm) |
178 | G.I. Pipes |
179 | Medium |
180 | 15 mm (1.23 kg/m) |
181 | 20 mm (1.59 kg/m) |
182 | 25 mm (2.40 kg/m) |
183 | 32 mm (3.17 kg/m) |
184 | 50 mm (5.16 kg/m) |
185 | 65 mm (6.63 kg/m) |
186 | 80 mm (8.64 kg/m) |
187 | Heavy |
188 | 15 mm (1.46 kg/m) |
189 | 20 mm (1.91 kg/m) |
190 | 25 mm (2.99kg/m) |
191 | 32 mm (3.97 kg/m) |
192 | 50 mm (6.24 kg/m) |
193 | 65 mm (8.02kg/m) |
194 | 80 mm (10.30 kg/m) |
195 | G.I. Coupler |
196 | 15 mm |
197 | 20 mm |
198 | 25 mm |
199 | 32 mm |
200 | 50 mm |
201 | 65 mm |
202 | 80 mm |
203 | G.I. Tee |
204 | 15 mm |
205 | 20 mm |
206 | 25 mm |
207 | 32 mm |
208 | 50 mm |
209 | 65 mm |
210 | 80 mm |
211 | G.I.Reducer |
212 | 20 x 15 mm. dia. |
213 | 25 x 20 mm. dia. |
214 | 32 x 25 mm. dia. |
215 | 65 x 50 mm. dia. |
216 | 80 x 65 mm. dia. |
217 | G.I.Elbow 90 deg. |
218 | 15 mm |
219 | 20 mm |
220 | 25 mm |
221 | 32 mm |
222 | 50 mm |
223 | 65 mm |
224 | 80 mm |
225 | G.I.Elbow/ Bend 45 deg. |
226 | 15 mm |
227 | 20 mm |
228 | 25 mm |
229 | 32 mm |
230 | 50 mm |
231 | 65 mm |
232 | 80 mm |
233 | G.I.Endcap |
234 | 15 mm |
235 | 20 mm |
236 | 25 mm |
237 | 32 mm |
238 | 50 mm |
239 | 65 mm |
240 | 80 mm |
241 | G.I.Nipple 3 inch Length Size |
242 | 15 mm |
243 | 20 mm |
244 | 25 mm |
245 | G.I.Nipple 0.5 Ft. / 6 inchLength Size |
246 | 15 mm |
247 | 20 mm |
248 | 25 mm |
249 | 32 mm |
250 | 50 mm |
251 | 65 mm |
252 | 80 mm |
253 | G.I.Nipple 1 Ft. Length Size |
254 | 15 mm |
255 | 20 mm |
256 | 25 mm |
257 | 32 mm |
258 | 50 mm |
259 | 65 mm |
260 | 80 mm |
261 | G.I.Nipple 1.5 Ft. Length Size |
262 | 15 mm |
263 | 20 mm |
264 | 25 mm |
265 | 32 mm |
266 | 50 mm |
267 | 65 mm |
268 | 80 mm |
269 | G.I.Nipple 2 Ft. Length Size |
270 | 15 mm |
271 | 20 mm |
272 | 25 mm |
273 | 32 mm |
274 | 50 mm |
275 | 65 mm |
276 | 80 mm |
277 | G.I.Union |
278 | 15 mm |
279 | 20 mm |
280 | 25 mm |
281 | 32 mm |
282 | 50 mm |
283 | G.I. Tap |
284 | 25 mm |
285 | 32 mm |
286 | Steel Tap |
287 | 25 mm |
288 | 32 mm |
289 | uPVC / PVC Tap |
290 | 20 mm |
291 | 25 mm |
292 | Double Ended Open Jaw Spanners set |
293 | (Combination Spanner 14 PCs. Set) 8,9,10,11,12,13,14,15,16,17,19,21,22,24 mm set |
294 | Ring Spanner 12 PCs. Set 6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23, 24x27,25x28,30x32 |
295 | Adjustable Spanner |
296 | Chain Spanner |
297 | Side Cutting Plier (Chrom-Vanadium Steel) |
298 | Cutters |
299 | Screwdriver |
300 | Tester |
301 | Hammer With Wooden Handle |
302 | Salac Bottle |
303 | M-seal SealentPacket |
304 | Steelgrip / Insulation Tape |
305 | Teflon Tape |
306 | Sand Paper |
307 | C.I. Mechanical Compression Flanged / Socket TalePiece |
308 | 80 mm dia. |
309 | 100 mm dia. |
310 | 125 mm dia. |
311 | 150 mm dia. |
312 | 200 mm dia. |
313 | C.I. Mech. Compression Joints (popularly known as JiffyTM ) |
314 | 80 mm dia. |
315 | 100 mm dia. |
316 | 125 mm dia. |
317 | 150 mm dia. |
318 | 200 mm dia. |
319 | C.I. Mechanical Joint Tees |
320 | 80 x 80 x 80 mm. dia. |
321 | 100 x 100 x 80 mm. dia. |
322 | 100 x 100 x 100 mm. dia. |
323 | C.I. Mechanical Joint Reducers |
324 | 100 x 80 mm. dia. |
325 | 150 x 80 mm. dia. |
326 | Hand Water Pumps |
327 | Hand Pump new Set |
328 | G.I.Riser Main Pipe |
329 | 32 mm dia. |
330 | Pump / Connecting Rod |
331 | Upper Cap |
332 | Cylinder Barrel |
333 | Piston (Plunger) Assembly |
334 | Piston Valve (Traveling Valve) |
335 | Piston Seals |
336 | Foot Valve |
337 | Lower Cap |
338 | G.I. Handle |
339 | Handpump Chain with coupler |
340 | Hand Pump Body |
341 | Axle |
342 | Washer (4mm thick ) for axle (Nylon ) |
343 | Washer (4mm thick ) for axle (leather) |
344 | Bearings (6204Z) |
345 | Spacer, |
346 | Chain with coupling |
347 | Rod Coupling |
348 | Flanges G.I. |
349 | 50 mm Nominal Bore Dia. |
350 | 65 mm Nominal Bore Dia. |
351 | 80 mm Nominal Bore Dia. |
352 | 100 mm Nominal Bore Dia. |
353 | Providing and supplying Asbestos Cement pressure pipes |
354 | Class 15 (Test Pressure 1.5 MPa) |
355 | 80 mm |
356 | 100 mm |
357 | Providing and supplying C.I. detachable joints |
358 | Class 10 (Test Pressure 1.0 MPa) |
359 | 80 mm |
360 | 100 mm |
361 | 125 mm |
362 | 150 mm |
363 | Sealing "O" Rings of SBR (for CID Joints) |
364 | 80 mm |
365 | 100 mm |
366 | 150 mm |
367 | Providing double flanged Sluice Valves |
368 | Sluice Valve PN-1.0, Head-100 m |
369 | 50 mm |
370 | 65 mm |
371 | 80 mm |
372 | 100 mm |
373 | 125 mm |
374 | 150 mm |
375 | 200 mm |
376 | Check valve/Non Return Valve PN-1.0, Head-100m |
377 | 50 mm |
378 | 65 mm |
379 | 80 mm |
380 | 100 mm |
381 | 125 mm |
382 | 150 mm |
383 | Gunmetal Valve Spindle Stem /Rod |
384 | 50 mm |
385 | 65 mm |
386 | 80 mm |
387 | 100 mm |
388 | Steelmetal Valve Spindle Stem /Rod |
389 | 50 mm |
390 | 65 mm |
391 | 80 mm |
392 | 100 mm |
393 | Valve Spindle Cheknut |
394 | 50 mm |
395 | 65 mm |
396 | 80 mm |
397 | 100 mm |
398 | 150 mm |
399 | Ball Valve PVC |
400 | 20 mm |
401 | 25 mm |
402 | 32 mm |
403 | 50 mm |
404 | Ball Valve GI Make |
405 | 20 mm |
406 | 25 mm |
407 | 32 mm |
408 | 50 mm |
409 | Providing and supplying Air Valves |
410 | Air Valve Double Ball Flanged |
411 | Type PN-1 |
412 | 50 mm |
413 | Valve Gland Packing /Champion Jointing Rope 2.5 ft. min. size |
414 | 4 mm |
415 | 6 mm |
416 | 8 mm |
417 | 10 mm |
418 | CABLES |
419 | 3 core PVC insulated, PVC sheathed copper conductor flat submersible cable |
420 | 3 core 2.5 sq mm |
421 | 3 core 4 sq mm |
422 | 3 core 6 sq mm |
423 | 3 core 10 sq mm |
424 | PVC - Sheathed 1 core flexible cord with copper conductor |
425 | 0.5 sq mm (4 A) |
426 | 0.75 sq mm (7 A) |
427 | 1 sq mm (11 A) |
428 | 1.5 sq mm (15 A) |
429 | 2.5 sq mm (19 A) |
430 | Rewirable or Kit Kat Fuse Unit |
431 | 32 Amp |
432 | 63 Amp |
433 | 100 Amp |
434 | 160 Amp |
435 | 200 Amp |
436 | 500 Amp |
437 | Ammeter |
438 | Voltmeter |
439 | Starters |
440 | MUG20 (10 hp to 12.5 hp) star delta starter |
441 | MUG20H (12.5 hp to 20 hp) star delta starter |
442 | Star-Delta starter Spareparts |
443 | pattikit |
444 | contactor set |
445 | magnet coil |
446 | riley |
447 | timer |
448 | Connection Plate |
449 | Direct on line Starter(DOL Starter)3 hp, 5hp, 7.5 hp to 10 hp |
450 | 2 HP to 5 HP |
451 | 7.5 HP |
452 | 10 HP |
453 | DOL starter Spareparts |
454 | pattikit |
455 | contactor set |
456 | magnet coil |
457 | riley |
458 | Main Switch |
459 | 16 Amps |
460 | 32 Amps |
461 | Double door Panel Box full set |
462 | Double door Panel Box (Empty) |
463 | HDPE Pipes P.E. 100 6 Kg/cm² |
464 | 32 mm |
465 | 63 mm |
466 | 75 mm |
467 | 90 mm |
468 | 110 mm |
469 | 125 mm |
470 | 140 mm |
471 | 160 mm |
472 | Supply of new Monoblock motor |
473 | 0.5 HP |
474 | 1 HP |
475 | Supply of new openwell type pump |
476 | 1 HP |
477 | 3 HP |
478 | 5 HP |
479 | Supply of new submerssible pump (Single Phase with Fiber Impeller 100 mm dia. V4 Type) |
480 | 1 HP / 1.5 HP |
481 | 2.0 HP |
482 | 3.0 HP |
483 | 4.0 HP |
484 | 5.0 HP |
485 | 7.5 Hp |
486 | Supply of new submerssible pump (Three Phase ) |
487 | 1.5 HP |
488 | 2.0 HP |
489 | 3.0 HP |
490 | 4.0 HP |
491 | 5.0 HP |
492 | 6.0 HP |
493 | 7.5 HP |
494 | Casing Stand |
495 | GI Clamps (1 mtr. Long x 0.1 mtr. Width x 0.01 mtr. Thick) |
496 | Service Wire 2 core aluminium conductor type |
497 | 4 sqmm |
498 | 6 sqmm |
499 | 10 sqmm |
500 | Tawa / Borecap |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail