Kerala State Electricity Board-KSEB has published Fabrication Of Line Materials Target For 2021 22 50 Percentage Of Distribution Plan And Ist Phase Of Transmission Plan Fabrication Of 11Kv V Cross Arm Back Clamps For 11Kv Or33kv V Cross Arm 1.8M And 2.4M Channel Cross Arm Back Clamps For Ht Cross A Rm An. Submission Date for this Tender is 28-02-2022. Clamps Tenders in Kottayam Kerala. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Fabricating 11kV/33kV" V" Cross arm using 75x40mm/100x50mm MS Channel cutting by gas, bending into required shape and jointed by arc welding in both sides of each gas cutting portion including 2 nos of 50mm long MS Flat 50x6mm wherever necessary on each ends and drilling 4nos. Of 22mm dia holes and 2 nos of 18mm dia holes as per drawing including flux removal,stacking the finished goods in such a manner that item can be counted in numbersas per direction of Departmental officers and as per drawings (Charges inclusive of labour, cutting gas, welding rod, punch & die, drill bits etc.) complete. |
2 | Fabricating back clamps for 11kV/33kV "V" Crossarm 44cm long using 75x8mm M.S.Flat as per design and stacking the finished clamps in such a manner that the item can be counted in numbersas per direction of Departmental officers. (Charges inclusive of shearing tools, punch & die etc. complete.) |
3 | Fabricating 1.8m Channel Crossarm using MS Channel75x40 (ISMC 75) and with 21mm dia drilled/punched holes as per Boards"s specification and drawing, including gas cutting, levelling and stacking at suitable place as per the direction of the departmental officers (Charges inclusive of cost of labour & consumables, such as cutting gas, LPG, punch & die, drill bit etc.)complete. |
4 | Fabricating 2.4m Channel Crossarm using MS Channel75x40 (ISMC 75) and with 21mm dia drilled/punched holes as per Boards"s specification and drawing, including gas cutting, levelling and stacking at suitable place as per the direction of the departmental officers (Charges inclusive of cost of labour & consumables, such as cutting gas, LPG, punch & die etc.)complete. |
5 | Fabricating back clamps for HT Crossarms 40cm long using 75x8mm M.S.Flat as per design and stacking the finished clamps in such a manner that the item can be counted in numbersas per direction of Departmental officers. (Charges inclusive of shearing tools, punch & die etc. complete.) |
6 | Fabricating 11kV "F" Clamp using MS Flat 50x8mm, cutting, levelling, drilling holes, bending the top end for a length of 5cm and welding 5cm long 50x8mm flat to form "F" shape for holding insulator pin at top end as per Board"s design and drawing including stacking the finished products at suitable places in such a manner that the item can be easily counted in numbersas per direction of Departmental officers. (Charges inclusive of labour and cost of welding electrode, welding tools,shearing tools, punch & die etc. complete.) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail