Public Works Department-PWD has published Special Repair To Govt. Ayurvedic Pharmacy At Joginder Nagar District Mandi ( H.P. ) Sub Head - Renovation Of Roof Of Machinery / Manufacturing Hall I And Ii Sub Work- Providing And Laying Preprinting Sheet Roofing, Partical Board Ceiling, Tile Work A. Submission Date for this Tender is 15-02-2022. Building Repair Tenders in joginder Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing eaves board 200mmx 25mm (two hundred by twenty five milimeter) thickincluding fixig in position water proofcommercial boardas per the direction of Engineer-In-Charge including carriage of material within all leads and lifts complete in all respect. |
| 2 | Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position in beams joists channels ,angles ,tee ,flats with connecting plates or angle cleats including cutting hoisting fixing in position & applying a priming coat of red lead paint complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. |
| 3 | Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/ sqm (one hundred twenty grammes per square meter) (both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm (thirty two milimeter) and 0.50 mm (zero point five milimeter)thick, fixed to the floor and ceiling at the spacing of 610 mm (six hundred ten milimeter) centre to centre with dash fastener of 12.5 mm (tweleve point five milimeter) dia meter 50 mm (fifty milimeter) length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm (fourty eight milimeter) wide having one flange of 34 mm (thirty four milimeter)and other flange 36 mm(thirty six milimeter) and 0.50 mm (zero point five milimeter)thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm (six hundred and ten milimeter)centre to centre by 6 mm (six milimeter)dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm(four hundred fifty milimeter) centre to centre, and fixing of boards to both side of frame work by 25 mm (twenty five milimeter) long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm (three hundred milimeter) centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, Galvanised M.S. fixing channel of 99 mm (ninty nine milimeter)width (0.9 mm (zero point nine milimeter) thick having two flanges of 9.5 mm (nine point five milimeter)each with zinc coating of 120 gms/sqm (one hundred twenty gramme per square meter) (both side inclusive)) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm) (twenty five by twenty five by zero point five milimeter), joint finisher and two coats of primer suitable for board as per manufacture"s specification and direction of engineer in charge all complete. 66mm overall thickness Partition with 8mm thick double skin Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm, (two hundred twenty five kilogramme per square meter) Bending Strength 100 kg./ sq.cm (hundred kilogramme per square centimetre) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. |
| 4 | Providing and laying Vitrified tiles in Size of Tile 600x600 mm (six hundred by six hundred milimeter) (thickness to be specified by manufacturer), with water absorption less than 0.08 % (zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (tweleve milimeter) thick bed of cement mortar 1:3 (one cement isto three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogramme per square meter)including grouting the joint with white cement & matching pigments etc. complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. |
| 5 | Providing and fixing MS BP sheet 1.66mm to 2mm (one point six six millimetre to two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-In-Charge (Base members of steel work shall be measured & paid separately) including carriage of materials within all leads, lifts and other incidental charges. |
| 6 | Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster 5 (five) microns over 5 (five) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-In-Charge including carriage of material within all leads and lifts complete in all respect. |
| 7 | Providing and fixing ridges or hips 60cm (sixty centimetre) overall with 0.63mm (zero point six three millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating plus back coat of polyster of 5 (five) microns over 5 (five) microns primer coating icluding fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted GI limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-In-Charge including carriage of material within all leads and lifts complete in all respect. |
| 8 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 (fifty) micron) complete with all accesoriees as required as per the direction of Engineer-In-Charge including carriage of material within all leads and lifts complete in all respect. |
| 9 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) complete with all accesoriees as required as per the direction of Engineer-In-Charge including carriage of material within all leads and lifts complete in all respect. |
| 10 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 4.0 mm (Four milimeter ) thickness (weight not less than 10 kg/ sqm) (ten kilogramme per square meter) complete with all accesoriees as required as per the direction of Engineer-In-Charge including carriage of material within all leads and lifts complete in all respect. |
| 11 | Providing and fixing aluminium sliding door bolts, 250x16 mm (two hundred fifty by sixteen milimeter)ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete |
| 12 | Providing and fixing aluminium tower bolts, 300x10 mm (three hundred by ten milimeter) ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 13 | Providing and fixing aluminium tower bolts, 100x10 mm (hundred by ten milimeter) ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 14 | Providing and fixing aluminium handles, 125 mm (one hundred twenty five milimeter) ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 15 | Providing and fixing aluminium handles, 100 mm (one hundred milimeter) ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 16 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors Galvanised M.S. Wire gauze with 0.63 mm (zero point six three) dia wire and 1.4 mm (one point four milimeter)aperture on both sides with M.S. Flat 15x3 mm and nuts & bolts complete |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
