Military Engineer Services-MES has published Special Repairs To Bldg No T 19 Of 934 ( I ) Amb Pl Asc And Provn Of Certain Utility, Security Services For Hq 137 Wks Engrs And Provn Of Additional Room Near Bldg No T 7 In M Zone At Rms. Special Repairs To Bldg No T 19 Of 934 ( I ) Amb Pl Asc And P. Submission Date for this Tender is 21-02-2022. Building Repair Tenders in rangapahar Nagaland. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 14-Feb-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-02-2022 |
| Sl. No. | Item Description |
| 1 | B/R WORKS Dismantling asbestos cement (Corrugated or semi corrugated) sheets in roof covering complete all as specified and directed. |
| 2 | Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified and directed. |
| 3 | Dismantling, floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed. |
| 4 | Demolition of reed lathing single or double including battens and plaster or chicken wire lathing complete all as specified and directed. |
| 5 | Dismantling timber scantlings 40 sqcm and over in section, in unframed work any position complete all as specified and directed. |
| 6 | Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level complete all as specified and directed. |
| 7 | Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches etc complete all as specified and directed. |
| 8 | M&L brick work in CM (1:6) with sub class "B" brick full brick thick straight or curved on plan n. exc 6m mean radius complete all as specified and directed. |
| 9 | M&L for brick work with sub class "B" bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 10 | M&L for brickwork in cement mortar 1:6 with sub class `B" bricks in one brick thick honey comb walling,etc complete all as specified and directed. |
| 11 | Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames complete all as specified and directed. |
| 12 | All as per item 11.00 above but exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed. |
| 13 | Taking down shutters of any description not exceeding 1 Sqmeach complete all as specified and directed. |
| 14 | Dismantling boarding of any description and fixed in any position fixed with nails or screws complete all as specified and directed. |
| 15 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 16 | S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roofcovering /cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 17 | S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 18 | S&F for post of Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed. |
| 19 | M&L for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E 250) quality-A complete all as specified and directed. |
| 20 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165Fe-290 Grade-E-165 complete all as specified and directed. |
| 21 | S&Ffor4 mm thick of size 600x600mmHSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer boardE-Board Classic to be fixed GI grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mmduly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size and finally applying two coats of oil bound distemper complete all as specified and directed. |
| 22 | S&F Non skid ceramic floor tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.36 sqmin floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed. |
| 23 | All as per item No 22.00 but on vertical surfaces such as skirting , dado risers to stepsover and including 10 mm thick bedding layer in CM (1:4) , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 24 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shadecomplete all as specified and directed. |
| 25 | S&F Non skid ceramic floor tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but n.exc 0.11 sqmin floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed. |
| 26 | S&Fsecond class hardwood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and directed. |
| 27 | M&L for second class hardwood as in scantlings clean sawn timberfixed complete all as specified and directed. |
| 28 | M&L for plain fillets, square, rectangular or triangular in section clean sawn, secured with nails 2nd class hard wood exc 13and n.exc 25 sqcm complete all as specified and directed. |
| 29 | All as per item No 28.00 herein before but exc 6.00 and n.exc 13 Sqcm but bull nosed, splayed chamfered or rounded on one edge or face complete all as specified and directed. |
| 30 | S&F165x60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc,complete all as specified and directed. |
| 31 | S&FPressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,including one shop coat of primer, supplied and fixed complete all as specified and directed. |
| 32 | M&L for 35 mm thick 2nd class hardwood plain framed pannelled shutter (any number of panels) with panels of timber flat on both sides or of veneered particle board medium density , wood particle board with commercial face veneers , supplied and fitted to chowkats complete all as specified and directed. |
| 33 | M&L for 30 mm thick 2nd class hardwood plain framed pannelled shutter (any number of panels) with panels of timber flat on both sides or of veneered particle board medium density , wood particle board with commercial face veneers , supplied and fitted to chowkats complete all as specified and directed. |
| 34 | S &F 35mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.24 (a)complete all as specified and directed. |
| 35 | S&F 30 mm thick 2nd hardwood glazed and skeleton window and ventilator shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. ( with and without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats complete all as specified and directed. |
| 36 | M&L for sheet glass 3mm thick ordinary quality, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 37 | M&L sheet glassand glazing with oil putty/ glazing clips, rubber packing in square exc 0.5 sqm in each pane 4.8mm thick complete all as specified and directed. |
| 38 | S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed. |
| 39 | S&FStainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 40 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening complete all as specified and directed. |
| 41 | S&F Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C" channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame wedded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site including nacessary fittings etc complete all as specified and directed. |
| 42 | S&F 100mm medium weight butt hinges cold rolled mild steel complete all as specified and directed. |
| 43 | S&F75 size stainless steel butt hinges complete all as specified and directed |
| 44 | S&F150 mm Aluminium handles, cast type, anodisedcomplete all as specified and directed. |
| 45 | S&F125 mm Aluminium handles, cast type, anodisedcomplete all as specified and directed. |
| 46 | S&F150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixedcomplete all as specified and directed. |
| 47 | S&F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 48 | S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixedcomplete all as specified and directed. |
| 49 | S&F 300mm door spring ordianary rat taill rod pattern springs including roller and roller platecomplete all as specified and directed. |
| 50 | S&Ffloor door stopper of aluminium alloy body and tongue, anodised wit hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified and directed |
| 51 | M&L for rendering 15 mm thick in CM 1:4 on one side of lathing finished even and smooth without using extra cement complete all as specified and directed. |
| 52 | M&L for rendering 12 mm thick in CM 1:6 on other side of lathing finished even and smooth without using extra cement complete all as specified and directed. |
| 53 | S&F0.71 mm dia wire netting of galvanised steel wire of size 12 mm mesh fixed with tinned tack of wire staple complete all as specified and directed. |
| 54 | Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar complete all as specified and directed. |
| 55 | M&L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished fair and even without using extra cement complete all as specified and directed. |
| 56 | M&L rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces even and smooth without using extra cement complete all as specified and directed. |
| 57 | M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:4) and finished even and smooth without using extra cement complete all as specified and directed. |
| 58 | M&L for preparation of newwooden fillets surfaces and wood based surfaces of any description not exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pint wood primer. in tint as directed complete all as specified and directed. |
| 59 | M&L for preparation of new wooden of wood based surface of any description, not otherwise described over 10cm width or girthand applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 60 | M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint in any tint complete all as specified and directed. |
| 61 | M&L for preparation of new surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described andapplying two coat of synthetic enamel paint over a coat of redoxide on new surfaces in any tint complete all as specified and directed. |
| 62 | M&L for applying two coats of oil bound distemper on new plastered surfaces of walls over a coat of 2mm thick wall care putty incl preparation of surface complete all as specified and directed. |
| 63 | M&L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper of approved shade/tint complete all as specified and directed. |
| 64 | M&L for preparation of new external surfaces of walls including cornices, plasters etc (Plastered or un plastered surfaces) and applying two coats of cement base paint over one coat of primer as per manufacture instructions complete all as specified and directed. |
| 65 | M&L for preparation of old external surfaces of walls including cornices, plasters etc (Plastered or un plastered surfaces) and applying one coats of cement base paint including complete removal of existing surfaces all as per manufacture instructions complete all as specified and directed. |
| 66 | Taking up or down steel tubing 15mm bore and connection including cleaning for refixing or removal to store complete all as specified and directed. |
| 67 | All as per item No 66.00hereinbefore but 20mm dia complete all as specified and directed. |
| 68 | S&F 15mm dia steel tubes medium grade galvanised with all fittings and fixed to walls and ceiling or laid in floor complete all as specified and directed. |
| 69 | All as per item No 68.00 hereinbefore but 20mm dia complete all as specified and directed. |
| 70 | Refixing 15mm dia old GI tubing and connection in new or old position (wall ceiling floor etc including cutting altering the size or changing the new fittings etc complete all as specified and directed. |
| 71 | All as per item No 70.00 hereinbefore but 20mm dia complete all as specified and directed. |
| 72 | S&F vitreous china squattingpan water closet,Orrisa pattern of size 580mmx440mm white with integral foot rests excluding flushing cistertn and flush pipe complete all as specified and directed. |
| 73 | S&F 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and dual flush type complete all as specified complete all as specified and directed. |
| 74 | S&F in repairs10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle complete all as specified and directed. |
| 75 | Supply only flush pipe of polyethylene of low or high density of PVC 32mm dia for low level cistern complete all as specified and directed. |
| 76 | S&Fof soap-dish chromium plated complete all as specified and directed. |
| 77 | S&Fvitreous china urinal, half stall type, white including flushing cistern, flush pipe and waste pipe. CP waste coupling complete all as specified and directed. |
| 78 | S&F 15mm dia bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed dwon high pressure, with or wothout lettered `Hot" or `Cold" with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 79 | S&F in repair for600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 80 | S&F for brass chromium plated shower rose complete all as specified and directed. |
| 81 | M&L for bib cock CP with wall flange, fancy type 15 mm boredia complete all as specified and directed. |
| 82 | S&F CP angle cock 15mm cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 83 | S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms) complete all as specified and directed. |
| 84 | S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard wooden beded in cement mortor 1:3 with MS screws complete all as specified and directed. |
| 85 | S&F towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (min wt - 170 gms) complete all as specified and directed. |
| 86 | S&F110mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or fixed to wall or floor complete all as specified and directed. |
| 87 | S&F PVC (SWR) 110mm dia junction single T equal or unequal complete all as specified and directed. |
| 88 | S&F PVC (SWR) 110mm dia bends in any radius complete all as specified and directed. |
| 89 | S&F PVC (SWR) 75mm dia pipes single socketed in any length with rubber ring joints laid in trenches or fixed to wall or floor complete all as specified and directed. |
| 90 | S&F PVC (SWR) 75mm dia vent cowl complete all as specified and directed. |
| 91 | S&F PVC (SWR) 75mm dia bends any radius complete all as specified and directed. |
| 92 | S&F75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 93 | S&Fin repairs for 75mm bore dia pipe stack clamps out of 50 mm by 5mm flat iron & 16 mm dia round iron stays, including bolts & nuts & secuirng ends of stay to wall or roof complete all as specified and directed. |
| 94 | S&F4mm thick Plain mild steel wire, galvanised class 3, in detached work such as for mosquito nets and fixing to straining bolts, hooks, eyes, etc. fixed in repairs complete all as specified and directed. |
| 95 | S&Fin repairs for Draperly rod/Harrison rails of CP of 20 mm dia with fixing brackets, Stops rollers and rings etc complete all as specified and directed. |
| 96 | S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed. |
| 97 | M&L for anti fungal chequered cement concrete tiles 200x200x25mm thick with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in cement mortar 1:6, etc, set, jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and directed. |
| 98 | M&L for cement concerte 75mm thick 1:3:6 type C-2 (using 40 mm graded) as in plinth protection/path, finished smooth and even without using extra cement complete all as specified and directed. |
| 99 | M&L for cement concrete type C-2,1:3:6(40mmgraded stone aggregates) as in surface channels and drains complete all as specified and directed. |
| 100 | M&L for Extra forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement complete all as specified and directed. |
| 101 | M&L for surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed. |
| 102 | Excavation in over areas exc 1.5m deep & not exc 3 m deep and getting out in soft/loose soil |
| 103 | Excavation in over areas not exc 1.5m deep & getting out soft/loose soil complete all as specified and directed. |
| 104 | M&L for excavation in trenches not exc. 1.5m wide and not exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manhole, pier holes, etc not exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed. |
| 105 | M&L for excavation in post holes ( or similar holes) each not exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed. |
| 106 | Removing excavation material not exc. 50m & deposited where directed at a level not exc. 1.5m above the starting point complete all as specified and directed. |
| 107 | Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all complete all as specified ans as directed. |
| 108 | M&L of Sand filling under floor or in foundations including watering and consolidation complete all as specified and directed. |
| 109 | M&L for PCC (1:4:8) type D-2 (using 40mm graded agg) as in foundation, filling and mass concrete complete all as specified and directed. |
| 110 | M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed. |
| 111 | All same as per item No 110.00 above but 6mm dia and over and including 10mm dia in stirrups spacers and binders |
| 112 | M&L for RCC Nominal Mix Type B1, (1:2:4) (using 20 mm graded stone aggregate) as in foundation, including rafts, footings, foundation beams; plinth beams; bases for coloumns, etc basement slabs under reamed piles and mass concrete complete all as specified and directed. |
| 113 | M&L for RCC Nominal Mix Type B1, (1:2:4)(using 20 mm graded stone aggregate)as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 114 | M&L for RCC Nominal Mix Type B1, (1:2:4)(using 20 mm graded stone aggregate) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 115 | M&L for RCC Nominal Mix Type B1, (1:2:4)(using 20 mm graded stone aggregate) as in chajjas complete all as specified and directed. |
| 116 | M&L for RCC Nominal Mix Type B1, (1:2:4) (using 20 mm graded stone aggregate) as in lintles complete all as specified and directed. |
| 117 | M&L for RCC Nominal Mix Type B1, (1:2:4) (using 20 mm graded stone aggregate) as in beams, cantilvers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 118 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 119 | Use and waste of formwork to sides of pillars posts, struts, piers, columns and stanchions finished the suface rough complete all as specified and directed. |
| 120 | Use and waste of formwork to sides and soffits of floors or roof beams, beams haunchings, girders,bressummers lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc complete all as specified and directed. |
| 121 | Use and waste of formwork to chajjas, troughts and similar items including edges complete all as specified and directed complete all as specified and directed. |
| 122 | M&L form work with fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work not exc 200mm thick (horizontal or sloping) complete all as specified and directed. |
| 123 | Supply only water proofing compound complete all as specified and directed. |
| 124 | S&F steel windows with side hung shutters including Box type hinges with steel handle and steel peg stay, complete with glazing bars, devetailed or welded complete all as specified and directed. |
| 125 | S&F steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete without glazing bars, devetailed or welded complete all as specified and directed. |
| 126 | S&F ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed. |
| 127 | S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 Sq.m in each pane complete all as specified and directed. |
| 128 | S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guardbars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 129 | M&L for hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammmed to a true surface complete all as specified and directed. |
| 130 | M&L 40 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone agg) as damp proof course to horizontal or vertical surfaces including necessary form works, applying evenly a coat of blown type bitumen at 1.50 kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm including 150 micron thick polythene film laid on a coat of bitumen primer @ 0.30 to 0.50 kg per sqm complete all as specified and directed. |
| 131 | M&L PCC 1:4:8 type D-2 75mm thick as in sub base of floor. |
| 132 | M&L for forming construction joints 65mm deep x 10mm wide, filled with sealing compound grade "A"complete all as specified and directed. |
| 133 | S&F Vitreous China wash basin white flat back size 550x400mm excluding taps chain and plug and procelain stopper but including brackets including PVC waste pipe 32 mm complete all as specified and directed. |
| 134 | S&F 500 ltr capacity ratational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as per specified in SSR Part I complete all as specified and directed. |
| 135 | S&F ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 20mm dia bore pipe complete all as specified and directed. |
| 136 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 137 | S&F 100mm cast iron sanitary connections socket to fit WC outlet complete all as specified and directed. |
| 138 | S&F 15 mm diastop valveCP with crutch or butterfly handle complete |
| 139 | S&Fof steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS – 1161 – 1979 grade St – 240 complete all as specified and directed. |
| 140 | S&F Plates (plain or chequered) channels. Square cut or notched ) (ordinary and counter sunk) forming holes, without any attachment of Fe-410-W (Gde-E-250 quality-A)complete all as specified and directed. |
| 141 | S&F bands, straps or stays , plain angle cleat or flat iron cleat or securing purlins to wood trusses or rafters, knee pieceand similar small articles etc conforming to Fe-290 Gde, E-165 complete all as specified and directed. |
| 142 | M&L for PCC (1:2:4)type B-1 (20mm graded aggregate) as in lintels up to 1.5m clear span, cills, steps, seismic & other similar bands, plinth course, string course, lacing course, parapets & railing up to 60cm in height, copings, kneelers, apex stones, bed plates, kerbs , water trought & the like including weathering, slightly rounded or chamfered angles & throating, complete all as specified and directed. |
| 143 | M&L cement concrete 1:3:6 type C- 2 for bed concrete to drain pipes including packing under and haunching against the sides of pipes of 150 mm dia after they are laid and tested complete all as specified and directed. |
| 144 | M&L SGSW drain pipe of 150mm dia laid in trenches and jointed complete all as specified and directed. |
| 145 | Providing precast cement concrete type B-1, 1;2:4(20mm graded aggregate) in cover slabs (for man holes etc) and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed complete all as specified and directed. |
| 146 | Dismantling steel (Corrugated or semicorrugated) sheets in roof covering any gauge, thickness, including Nainital or similar pattern complete all as specified and directed. |
| 147 | Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 148 | M&L for 100 mm thick PCC 1:4:8 type D-2, (using 40 mm graded stone aggregate) as in sub base over polythene sheet complete all as specified and directed. |
| 149 | M&L for 15 mm thick screed bed in cement mortar 1:6 for layingfloor finishes under floor complete all as specified and directed. |
| 150 | S&F Stainless steel sink with draining board made out of 1.00mm thick sheet for kitchen or laborotary with plugs, washers, waste pipe including beding in cement mortarto dwarf wall or including fixing,cast iron cantilever bracket and connecting union to pipe overall size 915x460mm with bowl size 410mmx330mmx160mm complete all as specified and directed. |
| 151 | S&F anodised aluminium frame and shutters for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.fixed type without sash bar, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make, fixing with dash fasteners of required dia and size, including ecessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, including necessary locking arrangements complete all as specified and directed. |
| 152 | M&L for complete removal of existing treatment of wall and applying two coats of distemper oil emulsion over a coat of 3mm thick wall care putty filling complete all as specified and directed. |
| 153 | M&L for Glazed ceramic tiles in vertical surface 350x250x7mm/ 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick CM (1:4) backing coat complete all as specified and directed. |
| 154 | M&L for brick work with sub class "B" bricks, old size straight or curved on plan exceeding 6 mtr mean radius and built in CM (1:4) complete all as specified and directed. |
| 155 | E/M WORKS Taking down carefullycopper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling,floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and directed. |
| 156 | M&Lfor Point wiring complete with 1.5 Sqmm single core PVC insulated cable, with multi strnded copper conductorsFRLSH 1100 volt grade, drawn through and including PVC casing and caping with all conduit accessories and making good to the disturbed surfaces of walls, ceiling,floors etc. to match with the existing surface ) and including provision of 1.5 Sqmm FRLSH PVC insulated copper cable as earth continiuty conductor connected to common earth dolly complete with PVC switch board for fixing switch socket etc complete all as specified and directed. Make:- Finolex/Richa/RR Kabel or any equivalent make as approved by GE. Make of caping/casing & PVC boxes :- Prestoplast/Finolex/supreme/Richa or any equivalent make as approved by GE. |
| 157 | Onelightpointcontrolled by one, one way switchcomplete all as specified and directed. |
| 158 | One Exhaust/Ceiling fan point controlled by one, one wayswitch complete all as specified and directed |
| 159 | One 3 pin socket outlet 5 Amps on the same board with other switches complete all as specified and directed |
| 160 | One 3 pin socket outlet 5 Amps on the Independent board complete all as specified and directed |
| 161 | All as per item No- 156.00 here-in-before but with 2.5 Sq mm for 3 pin 16 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. |
| 162 | M&L for Switch piano flush type single pole, one way 5Acomplete all as specified and directed Make : Anchor/Legrand/Kinjal or any equivalent make as approved by GE. |
| 163 | M&L for Socket outlet, 2 in 1, 3 pin 5A flush type complete all as specified and as directed. Make : Anchor/Legrand/Kinjal or any equivalent make as approved by GE. |
| 164 | M&L forSwitch socket combination 2 in 1, 5Aflush type complete all as specified and as directed. Make : Anchor/Legrand/Kinjal or any equivalent make as approved by GE. |
| 165 | M&L forSwitch socket combination 2 in 1, 5A/16A, 5 in 1 flush typecomplete all as specified and as directed. Make : Anchor/Legrand/Kinjal or any equivalent make as approved by GE. |
| 166 | M&L for bell push switch 5 amps piano type flush type complete all as specified and as directed. Make : Anchor/Legrand/Kinjal or any equivalent make as approved by GE. |
| 167 | M&L for replacement of Bell AC 230 volts musical type complete all as specified and as directed. Make : Anchor/Legrand/Kinjal or any equivalent make as approved by GE. |
| 168 | M&L for stepped type electronic fan regulator 100/120 Watt socket size flush type on the existing phenolic laminated sheet etc. complete all as specified and as directed. Make : Anchor/Legrand/Kinjal or any equivalent make as approved by GE. |
| 169 | M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed. Make : Anchor/Legrand/Kinjal or any equivalent make as approved by GE. |
| 170 | S&F for, IP>= 20, Class I, LED light fitting 1 x20 W (4 FT), 240V, PF-0.9, CRI == 80, CT>= 6000 K, wall /surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in & incl flexible hose from ceiling rose to fitting complete all as specified and as directed. Make : Crompton Greaves Cat Part No : CCS-102-20-SL-DP-NWH/Bajaj/Philips or any equivalent make as approved by GE. |
| 171 | S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. with all accessories internally pre wiredcomplete all as specified and directed. Make: Havells/Bajaj/Philps/CG or any equivalent make as approved by GE. |
| 172 | M&L for 09W LED, 2", Wall mountedpolycarbonate batten internally pre-wired with electronic driver and polycarbonate diffuser and fixing the same onand including two Nos PVC blocks and connecting upwith flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose to the light fitting complete all as specified and as directed. Make : CG/Bajaj/Philips/Havells or any equivalent make as approved by GE. |
| 173 | M&L for Lamp holder , PVC/ Polycarbonate type with PVC round/square block incl 9 watt LED lamp suitable for lamp holder fittings incl taking down old unsv light fitting. Make oF Lamp holder:- Plaza/SSK/Hager or any equivalent make as approved by GE. MakeOf Lamp :- CG/Bajaj/Philips or any equivalent make as approved by GE. |
| 174 | M&L for decorative wall mounted light fitting made up of polycarbonate including 9 watt LED lampwith B-22 base complete all as specified and directed. Make : CG/Bajaj/Philips/Havells or any equivalent make as approved by GE. |
| 175 | Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 20 watts, CRI > 70, Power factor > 1.95, colour temp 5700 K, Luminous effieciency not less than 100 lumen/watt, 6000 Lumens output, IP-66 protection including electronic driver (SMPS based constant current supply with < 10% THD, output open/short circuit protection, phase to phase protection, over voltage protection, surge voltage protection etc) unit suitable for working volt 140-270 V AC, 50 Hz, pressure die cast aluminium housing and finishing epoxy white powder coated grey colur after phospho chromate treatment with all accessories and connecting up complete all as specified and directed. (Note : Test certificate in support of the technical parameters of the light fittings is to be submitted in original to the Engr-in-Charge by the contractor.) Make : CG, Cat No- LSTS-20-CDL-M/ Bajaj/ Philips or any make approved by GE. |
| 176 | Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length. Make:- Finolex/Richa/RR Kabel or any equivalent make as approved by GE. Make of caping/casing :- Prestoplast/Finolex/supreme or any equivalent make as approved by GE. |
| 177 | Taking down Exh/Ceiling fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearing, painting of fans complete with superior quality synthetic enamel paint by spraying including filling cavaties with filler, after cleaning all dust, reassembling the fan and blades,hanging/ fixing the fan in its original position and testing on completion complete all as specified and as directed. |
| 178 | M&L for rubber bush with clamping set, comprising GI bolt, nut and split pin complete all as specified and as directed. |
| 179 | M&L for replacement of capacitor2.5 Mfd incl making electrical connection complete all as specified and as directed. |
| 180 | M&L for replacement of steel ball bearing/bush of suitable size compatible to the existing ceiling fan complete all as specified and as directed. |
| 181 | M&L for copper rewinding for suitable size complete to the existing ceiling fan complete all as specifed and as directed. |
| 182 | M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, withneutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed. Make:- Legrand Cat No 507611 or equivalent in ABB/Siemens or any equivalent make as approved by GE. |
| 183 | S&FMCB SPN 32 amp rating 240V, 10KA "C" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioningfor complete all as specified and as directed. Make : Legrand Cat No 408617 or equivalent in ABB/Siemens or any equivalent make as approved by GE. |
| 184 | S&FMCB SP 5-32 amp rating 240V, 10KA "C" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioningfor complete all as specified and as directed. Make:- Legrand Cat No 408587-95 or equivalent in ABB/Siemens or any equivalent make as approved by GE. |
| 185 | Supply and fixing MCB TPN 40 to 63 Amps 415V 10KA "C" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and as directed. Make : Legrand/Schneider/Siemens/ABB |
| 186 | M&L for metal clad AC socket point single pole and neutralenclosure with a tow pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed. Make : Legrand/Schneider/Siemens/ABB |
| 187 | S&F ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor, 5 star rating high speed including suitable size of fan hook and connecting upwith three core twisted flexible copper conductor cable of suitable size upto ceiling rose complete all as specified and as directed. Make : Usha/Bajaj/CG or any equivalent make as approved by GE. |
| 188 | S&F exhaust fan 230 mm made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding with twin twisted, copper flexible cable of size 0.75 Sqmm upto ceiling roseincluding making necessary holes in walls and fixing arrangement and making good disturbed surfaces complete all as specified and directed. Make : Bajaj/CG/Usha or any equivalent make as approved by GE. |
| 189 | S&F electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.& testing on completion, complete all as specified and directed. Make : Bajaj/Usha/CG or any equivalent make as approved by GE. |
| 190 | Taking down burnt unsv LT UG cable of any size and M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 25 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items. Make : Richa/ Finolex/ Polycab or any equivalent make as approved by GE. |
| 191 | M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 2 core complete all as specified and as directed . Note: (i) Excavation and earth work , dand cushioning , cable protection cover, pipe etc shall be measured seperately under relevent items complete all as specified and directed. Make : Richa/Polycab/Finolex or any equivalent make as approved by GE. |
| 192 | M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 4 core complete all as specified and as directed . Note: (i) Excavation and earth work , dand cushioning , cable protection cover, pipe etc shall be measured seperately under relevent items complete all as specified and directed. Make : Finolex/Richa/RR Kabel or any make approved by GE. |
| 193 | M&L forfine river washed sand in trenches complete all as specified ans as directed. NOTE: For measurement purpose, punned down thickness shall only be taken complete all as specified and directed. |
| 194 | M&L for laying brick sub class "B" old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed |
| 195 | M&L for tubes " medium grade" galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables of size 40 mm dia bore complete all as specified and as directed. Make:- Jindal/TATA/Prakash surya or any equivalent make as approved by GE. |
| 196 | M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
