Airports Authority Of India has published Installation Of Security Equipment At Silchar Airport. Sh Sitc Of Bollard Tyre Killer Boom Barrier And Associated Works Installation Of Security Equipment At Silchar Airport. Sh Sitc Of Bollard Tyre Killer Boom Barrier And Associated Works. Submission Date for this Tender is 18-02-2022. Gate Barrier Systems Tenders in silchar Assam. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 05-Feb-2022 | Date Corrigendum | Date | 08-02-2022 |
| 2 | 07-Feb-2022 | Corrigendum-II | Date | 11-02-2022 |
| 3 | 11-Feb-2022 | Corrigendum-III | Date | 18-02-2022 |
| Sl. No. | Item Description |
| 1 | SH:I SITC of security equipments & associated works. Design, supply, installation, connection, testing and commissioning of K4 crash rated Electro hydraulic retractable automatic bollards for a road width of around 8.0 mtr. with i.) having miniumum 800 mm height for each bollard ii.)having miniumum 220 mm diamter for each bollard iii.)raising/lowering time of not more than 4 to 6 seconds iv.)material of construction of cylinder ST52/S355JR grade steel with Stainless steel cover v.)with push button and remote control vi.)having IP 66 vii.)having provision for manual down operation in case of power failure viii.)nominal operating on power supply 0f 440Volts(nominal),50 Hz, 3 Phase/230 Volts (nominal),50 Hz ,1 Phase. ix.)meeting technical specifications attached x.)distance between each bollard (centre to centre) shall not be more than 1.2 metres and not less than 6 No. of bollards. xi.)shall be provided with circular illuminated LED lights xii.)adequate safety against vehicle and humans(loop detectors and photo sensors) xiii.)PLC/Microprocessor based control system xiv.)providing and laying of control cable, power cable(In ground DWC pipe at a depth of 0.75 mtr) fixing of control switches /remote control modules in designated rooms and all civil workslike excavcation for foundation. providing of foundation of suitable size for the systemand accessories etc complete as required. (Refer Technical Specifications Attached for more details) (K4 crash rating test certificate from accredited authority shall be submitted by bidder) Location: Vehicle/operation gate. |
| 2 | Design, supply, installation, connection, testing and commissioning of K4 crash rated Electrohydraulic retractable automatic bollards for a road width of around 5.62 mtr. with i.) having miniumum 800 mm height for each bollard ii.)having miniumum 220 mm diamter for each bollard iii.)raising/lowering time of not more than 4 to 6 seconds iv.)material of construction of cylinder ST52/S355JR grade steel with Stainless steel cover v.)with push button and remote control vi.)having IP 66 vii.)having provision for manual down operation in case of power failure viii.)nominal operating on power supply 0f 440Volts(nominal),50 Hz, 3 Phase/230 Volts (nominal),50 Hz ,1 Phase. ix.)meeting technical specifications attached x.)distance between each bollard (centre to centre) shall not be more than 1.2 metres and not less than 4 No. of bollards. xi.)shall be provided with circular illuminated LED lights xii.)adequate safety against vehicle and humans(loop detectors and photo sensors) xiii.)PLC/Microprocessor based control system xiv.)providing and laying of control cable, power cable(In ground DWC pipe at a depth of 0.75 mtr) fixing of control switches /remote control modules in designated rooms and all civil workslike excavcation for foundation. providing of foundation of suitable size for the systemand accessories etc complete as required. (Refer Technical Specifications Attached for more details) Location: Departure vehicle entry gate. |
| 3 | Design, supply, installation, connection, testing and commissioning of crash rated Electro Hydraulic tyre killer for a road width of around 8.0 mtr. having following minimum features: i) The system shall consist of spikes at an angle of 60° made up of tampered steel along with all other accessories. ii) Provision of power off operation, manual operation, safety interlock detector, stop/go traffic light, sump pump, hydraulic power unit, control and logic circuit etc. iii) Height of the spikes of the Tyre killer in guard position shall be 450 mm as measured from the top of the foundation frame to the top of the barrier inclusive of the top road plate. iv) Each Tyre killer (or set) shall be capable of being raised or lowered within 2 to 3 seconds. v) Tyre killer shall be capable of operation of around 200 cycles per hour or more. vi) Capable of manual operation with the help of hand pump in the event of prolonged power interruption. vii) The system shall be able to bear axle load of minimum 20 tons of a moving vehicle. viii) Having Safety Interlock Detector. ix) Having Stop/Go Traffic Lights. x) Capable to operate in temperature -200 C to 600 C. xi) Suitable to operate on power supply 440/3/50 (voltage, phase and frequency). Motor shall be sufficiently sized for continuous rating. xii) Having control and logic circuit contain all relays, timers, programmable logic controller and other devices. (Refer Technical Specifications Attached for more details) (K4 crash rating test certificate from accredited authority shall be submitted by bidder) Location: Vehicle/operation gate. |
| 4 | Design, supply, installation, connection, testing and commissioning of crash rated Electro Hydraulic tyre killer for a road width of around 5.62 mtr. having following minimum features: i) The system shall consist of spikes at an angle of 60° made up of tampered steel along with all other accessories. ii) Provision of power off operation, manual operation, safety interlock detector, stop/go traffic light, sump pump, hydraulic power unit, control and logic circuit etc. iii) Height of the spikes of the Tyre killer in guard position shall be 450 mm as measured from the top of the foundation frame to the top of the barrier inclusive of the top road plate. iv) Each Tyre killer (or set) shall be capable of being raised or lowered within 2 to 3 seconds. v) Tyre killer shall be capable of operation of around 200 cycles per hour or more. vi) Capable of manual operation with the help of hand pump in the event of prolonged power interruption. vii) The system shall be able to bear axle load of minimum 20 tons of a moving vehicle. viii) Having Safety Interlock Detector. ix) Having Stop/Go Traffic Lights. x) Capable to operate in temperature -200 C to 600 C. xi) Suitable to operate on power supply 440/3/50 (voltage, phase and frequency). Motor shall be sufficiently sized for continuous rating. xii) Having control and logic circuit contain all relays, timers, programmable logic controller and other devices. (Refer Technical Specifications Attached for more details) (K4 crash rating test certificate from accredited authority shall be submitted by bidder) Location: Departure vehicle entry gate. |
| 5 | Supply, Installation, Testing and commissioning of Automatic ElectricalBoom Barrier for double leaves of 4 Meter length each in master slave concept as per technical specification suitable to work on three/ single phase 415/230 volt +/- 5%, 50 Hz AC supply consisting of Boom Barrier Automatic, microprocessor/PLC based, control panel, including individual switching operation in local and remote location of two section logic circuit, earthing, civil foundation including excavation of existing PQC/ Bitumen road (at required depth as per site conditions) and making good after installation etc complete as required and having following features: i) Operating time shall be adjustable from minimum 1.8 sec to maximum not more than 6 sec as per requirement. ii) Power Supply : 230V +/-10%, 50 Hz single phase iii) Motor Power supply : AC/DC iv) Maximum power : 300W v) Protection class : IP54 or higher vi) Duty Cycle: Intensive use vii) Operating temperature: 0 to + 60 Degree Centigrade viii) Manual maneuver : Personalized release key ix) Provision of LED Warning light / buzzer (Refer Technical specification attached for more details) Location: Vehicle/operation gate. |
| 6 | Supply, Installation, Testing commissioning of Automatic Electrical Boom Barrier of 6 Meter length suitable to work on three/ single phase 415/230 volt +/- 5%, 50 Hz AC supply consisting of Boom Barrier Automatic, microprocessor/PLC based, control panel, including individual switching operation in local and remote location of two section logic circuit, earthing, civil foundation including excavation of existing PQC/ Bitumen road (at required depth as per site conditions) and making good after installation etc complete as required and having following features: i) Operating time shall be adjustable from minimum 1.8 sec to maximum not more than 6 sec as per requirement. ii) Power Supply : 230V +/-10%, 50 Hz single phase iii) Motor Power supply : AC/DC iv) Maximum power : 300W v) Protection class : IP54 or higher vi) Duty Cycle: Intensive use vii) Operating temperature: 0 to + 60 Degree Centigrade viii) Manual maneuver : Personalized release key ix) Provision of LED Warning light / buzzer (Refer Technical specification attached for more details) Location: Departure vehicle entry gate. |
| 7 | Supply, Installation, Testing commissioning ofMotorized, Automatic/Manual operated Electric Sliding Gate made of minimum 15mm MS section, incorporating infill (horizontal / vertical) supports single partition type having overall height of 2 mtr and width not less than 8 mtr length with clear opening 7 mtr and equipped with remote/manual operation facility. The gate shall be epoxy painted and shall be provided with sliding gate drive unit, MS post for holding top edge necessary bottom and Top Steel Rollers, side Nylon Rollers with Double Ball Bearing etc. as required self- backing 4 Module Rack, Emergency release, Control Box, Electronic Breaking etc. including necessary control connections etc. complete as required. Location: Vehicle/operation gate. |
| 8 | Supply of LT power cable of 1.1 KV grade of following sizes Aluminium conductor XLPE insulated PVC sheathed armoured cable confirming to IS 7098 (Part-I) - 1988 with upto date ammendment as required. 4Cx35 Sqmm. |
| 9 | Supply and laying of 80mm dia medium class GI Pipe in ground i/c excavation and refilling soil & making good the same etc. complete as required as per direction of EIC. |
| 10 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 35 sq. mm (32mm) |
| 11 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm |
| 12 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 13 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 14 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) (a) 4 way (4 + 12), Double door |
| 15 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) (b) 8 way (4 + 24), Double door |
| 16 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (a) Single pole and neutral, 32 Amp. |
| 17 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (b) Triple pole and neutral, 32 Amp. |
| 18 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 19 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 20 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 6 x 6 sq. mm |
| 21 | SH:II All Inclusive Comprehensive Maintenance Contract. All Inclusive Comprehensive Maintenance Contract of item no. 1 under SH: I above (Design, supply, installation, connection, testing and commissioning of K4 crash rated Electro hydraulic retractable automatic bollards for a road width of around 8.0 mtr.............) For 5 Years after Defect Liability period of 2 Years. 1st Year - (8% of SITC cost including Frieght, insurance & transportation etc.) |
| 22 | 2nd Year - (9% of SITC cost including Frieght, insurance & transportation etc.) |
| 23 | 3rd Year - (10% of SITC cost including Frieght, insurance & transportation etc.) |
| 24 | 4th Year - (11% of SITC cost including Frieght, insurance & transportation etc.) |
| 25 | 5th Year - (12% of SITC cost including Frieght, insurance & transportation etc.) |
| 26 | All Inclusive Comprehensive Maintenance Contract of item no. 2 under SH: I above (Design, supply, installation, connection, testing and commissioning of K4 crash rated Electrohydraulic retractable automatic bollards for a road width of around 5.62 mtr..............) For 5 Years after Defect Liability period of 2 Years. 1st Year - (8% of SITC cost including Frieght, insurance & transportation etc.) |
| 27 | 2nd Year - (9% of SITC cost including Frieght, insurance & transportation etc.) |
| 28 | 3rd Year - (10% of SITC cost including Frieght, insurance & transportation etc.) |
| 29 | 4th Year - (11% of SITC cost including Frieght, insurance & transportation etc.) |
| 30 | 5th Year - (12% of SITC cost including Frieght, insurance & transportation etc.) |
| 31 | All Inclusive Comprehensive Maintenance Contract of item no. 3 under SH: I above (Design, supply, installation, connection, testing and commissioning of crash rated Electro Hydraulic tyre killer for a road width of around 8.0 mtr..............) For 5 Years after Defect Liability period of 2 Years. 1st Year - (8% of SITC cost including Frieght, insurance & transportation etc.) |
| 32 | 2nd Year - (9% of SITC cost including Frieght, insurance & transportation etc.) |
| 33 | 3rd Year - (10% of SITC cost including Frieght, insurance & transportation etc.) |
| 34 | 4th Year - (11% of SITC cost including Frieght, insurance & transportation etc.) |
| 35 | 5th Year - (12% of SITC cost including Frieght, insurance & transportation etc.) |
| 36 | All Inclusive Comprehensive Maintenance Contract of item no. 4 under SH: I above (Design, supply, installation, connection, testing and commissioning of crash rated Electro Hydraulic tyre killer for a road width of around 5.62 mtr..............) For 5 Years after Defect Liability period of 2 Years. 1st Year - (8% of SITC cost including Frieght, insurance & transportation etc.) |
| 37 | 2nd Year - (9% of SITC cost including Frieght, insurance & transportation etc.) |
| 38 | 3rd Year - (10% of SITC cost including Frieght, insurance & transportation etc.) |
| 39 | 4th Year - (11% of SITC cost including Frieght, insurance & transportation etc.) |
| 40 | 5th Year - (12% of SITC cost including Frieght, insurance & transportation etc.) |
| 41 | All Inclusive Comprehensive Maintenance Contract of item no. 5 under SH: I above (Supply, Installation, Testing commissioning of Automatic Electrical Boom Barrier of 4 Meter length..............) For 5 Years after Defect Liability period of 2 Years. 1st Year - (8% of SITC cost including Frieght, insurance & transportation etc.) |
| 42 | 2nd Year - (9% of SITC cost including Frieght, insurance & transportation etc.) |
| 43 | 3rd Year - (10% of SITC cost including Frieght, insurance & transportation etc.) |
| 44 | 4th Year - (11% of SITC cost including Frieght, insurance & transportation etc.) |
| 45 | 5th Year - (12% of SITC cost including Frieght, insurance & transportation etc.) |
| 46 | All Inclusive Comprehensive Maintenance Contract of item no. 6 under SH: I above (Supply, Installation, Testing commissioning of Automatic Electrical Boom Barrier of 6 Meter length..............) For 5 Years after Defect Liability period of 2 Years. 1st Year - (8% of SITC cost including Frieght, insurance & transportation etc.) |
| 47 | 2nd Year - (9% of SITC cost including Frieght, insurance & transportation etc.) |
| 48 | 3rd Year - (10% of SITC cost including Frieght, insurance & transportation etc.) |
| 49 | 4th Year - (11% of SITC cost including Frieght, insurance & transportation etc.) |
| 50 | 5th Year - (12% of SITC cost including Frieght, insurance & transportation etc.) |
| 51 | All Inclusive Comprehensive Maintenance Contract of item no. 7 under SH: I above (Supply, Installation, Testing commissioning ofMotorized, Automatic/Manual operated Electric Sliding Gate..............) For 5 Years after Defect Liability period of 2 Years. 1st Year - (8% of SITC cost including Frieght, insurance & transportation etc.) |
| 52 | 2nd Year - (9% of SITC cost including Frieght, insurance & transportation etc.) |
| 53 | 3rd Year - (10% of SITC cost including Frieght, insurance & transportation etc.) |
| 54 | 4th Year - (11% of SITC cost including Frieght, insurance & transportation etc.) |
| 55 | 5th Year - (12% of SITC cost including Frieght, insurance & transportation etc.) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
