|
| 1 | E/work in excavation by manual means over areas (exceeding 30cm and upto 1.5mtr in width as well as 10Sqm on plan) including disposal of excavated earth upto 1mtr. for cutting edge, disposed earth to be levelled & neately dressed in: (All kind of soil). |
| 2 | E/work in excavation by manual means over areas (exceeding 30cm and upto 1.5mtr in width as well as 10Sqm on plan) including disposal of excavated earth upto 1mtr. for cutting edge, disposed earth to be levelled & neately dressed in: (All kind of soil 60%,soft rock 30% and Hard rock Blasting Prohibited 10% ). |
| 3 | Providing & laying in position cement concrete of specified grade excluding the c/o centring & shuttering all work upto plinth level in 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggr. 40MM nominal size (Crusher) |
| 4 | Providing & laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level in 1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggr. 20MM nominal size (Crusher) |
| 5 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement 1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggr. 20MM nominal size (Crusher) |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings balconies, shelves, chajjas, lintels, bands, plain window sills, staircases, & spiral stair cases upto floor five level excl. the c/o centering, shuttering,finishing & reinforcement with 1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggr. 20MM nominal size (Crusher) |
| 7 | Steel Reinforcement for RCC work incl. straighening, cutting, bending, placing in position & binding all complete upto plinth levelcold twisted bars Fe 500 |
| 8 | Providing & laying in position cement concrete of specified grade excluding the c/o centring & shuttering all work upto plinth level in 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggr. 20MM nominal size (Crusher) |
| 9 | Brick work with common burnt clay (non - modular)bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand). |
| 10 | Extra for brick work with common burnt clayin super structureabove plinth level upto Floor to V level |
| 11 | centring and shuttering including strutting, propping etc.and removal of form work for |
| 12 | Foundation, footings, bares of column etc. for mass concrete |
| 13 | Walls (any thickness.) incl. attached pilasters, buttresses, plinth & string courses . |
| 14 | Lintels, beams, plinth beams, girders, bress umers & cantilevers. |
| 15 | Suspended floors, roofs, landings, balconies and access platform |
| 16 | Edges of slabs and breaks in floors and walls (under 20cm wide) |
| 17 | Columns, pillars, piers, abutments, posts and struts. |
| 18 | Cement concrete flooring 1:2:4 ( 1cement : 2 coarse sand : 4 graded stone aggr.) finished with a floating coat of neat cement incl. cement slurry and curing completebut excl. C/o nosing of steps etc. complete( 50mm with 20mm nominal size stone (Crusher) |
| 19 | 12mm thick cement plaster of mix 1:4 (1 cement : 4 coarse sand). |
| 20 | 15mm Cement plaster on the rough side of single or half brick wall ofmix:1 : 4 ( 1 cement : 4 fine sand) |
| 21 | Steel work welded in built up sections / framed work incl. cutting hoisting, fixing in position & applyinga priming coat of approved steel primer using structural steel etc., as regd. In stringers, gratings frames Guarded Bars, Ladders, Railing (brackets Gates & similar works). |
| 22 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mmnominal size well rammed and consolidated and grouted with fine sand including finishingthe top smooth and curing complete |
| 23 | Pumping out water caused by springs, tidal or river seepage, broken water mains ordrains and the like |
| 24 | Proividing & fixing 1mm thick M.S. steel door and (Manhole cover) with frame of 40X40X6mm angle iron and 3mm M.S gusset plates at the junctions and corners, all necessary fittings complete, including a priming coat of approved steel primer using flats 30X6mm for diagonal braces |
| 25 | Providing and fixing glassstrips in joints of terrazo / C.C flooring 40mm wide and 4mm thick |
| 26 | Finishing walls with water proofing cement paint of required shade onNew work (two or more coats applied @ 3.84 kg/10sqm) |
| 27 | Providing electrification including 09 no\"s bulb holders including LED lights = 9 no.s , fans = 02 nos, fuse box 01 no. main switch(with complete wiring) 02 no 15 amp sockets, 02 amp 05 no sockets, of approved brand and manufacture as per BIS standards. Providing and installation of flood lights = 4 nos (100 watt or more with complete wiring, switches, switch boards and fuse etc (complete job) at stage zero |
| 28 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion 75MM dia pipe |
| 29 | Providing and fixing on wall face un-plasticized - PVC mouldedfittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion 75mm dia bend |
| 30 | Providing and fixing un-plasticised -PVC pipe clips of approved design toun-plasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete75mm dia pipe clips |
| 31 | Color washing on new work two or more coats with as base coat of white washing |
| 32 | Note :- The bidders shall quoted their rates including carriage / head load of the material, cost of valves including interconnections with main lines or GRS etc. |
