Military Engineer Services-MES has published Addition / Alteration And Special Repair To Bldg No P-153 ( Junior Sailors In Living Block Including Ship Galley ) At Inhs Nivarini At Ins Chilka Under Ge Chilka. Submission Date for this Tender is 19-02-2022. Building Repair Tenders in Khordha Odisha. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 04-Feb-2022 | Corrigendum No 1 | BOQ | 12-02-2022 |
| 2 | 12-Feb-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-02-2022 |
| Sl. No. | Item Description |
| 1 | Taking down chowkatsor framesnot exceeding1.5 Sqmeach with shutters (without taking off shutters from the frames) complete all as specified and as directed. |
| 2 | Taking down chowkat with shutters exceeding1.5 sqm but not exceeding 4.0 sqm (without taking off shutters from the frames)complete all as specified and as directed. |
| 3 | S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 4 | S&Fpowder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminiumsliding window and ventilator shutterswithout sash bar,aluminium sectionminimum weighing 0.55Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, locking arrangement and aluminium anodised fittings such as 100 mm long handle 02 Nos,150 mm long hinges,peg stays including allother accossorisesetc complete all as specified and as directed. Note :-Glassor wire cloth shall be measuredand paid seperately under respective item as considered therein. |
| 5 | S&Fpowder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium door shutters of side hung type withaluminium sections minimum weighing 1.00 Kg/m including necessary joining cleats, glazing clips, rubber paking, anodised aluminium snap beading, neoprene packing, screws,anodised aluminiumfittings such ashandles 2 Nos and 4 Nos hinges in each shutter, tower bolt 150mm long 2 Nos etc complete all as specified and as directed. Note :-Glassor particle boards shall be measuredand paid seperately under respective item as considered therein. |
| 6 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples toaluminium windows complete all as specified and as directed. |
| 7 | M&L 12 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminationsfixed with screws to aluminium door frame work complete all as specified and as directed. |
| 8 | S&FAluminium body(Die cast)body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in widthand of weight between 61 to 80 Kg complete all as specified and as directed. |
| 9 | S&F 300 mm long, aluminium alloy,anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloyand fixed complete all as specified and as directed. |
| 10 | S&F 200 mm longaluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 11 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubein opening as per specification and drawing complete all as specified and as directed. |
| 12 | S&F Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of M.S tubes for top & bottom rails, M.S frame shall be covered with beat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to befitted in the M.S frame welded/sealed to the stiles & railswith suitable PVC sheet beading, and joined toghther with solvent cement, suppling & fixing in the frame at site as per specification and drawing complete all as specified and as directed. |
| 13 | S&F 100 mm long butt hinges, medium weight, cold rolled mild steelcomplete all as specified and as directed. |
| 14 | S&F 150 mm long extruded aluminium alloy handles, cast type anodised complete all as specified and as directed. |
| 15 | S&F 140mmoverall length of cover plate offloor door stopper of aluminium alloy body and tougue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 16 | S&F 4 mm thicksheet glass, ordinary quality in squaresnot exceeding 0.5 sqm each pane for fixing to aluminium or wooden joinery work complete all as specified and as directed. |
| 17 | S&F 4 mm thickfiguredglass, pin head type , in squaresnot exceeding 0.5 sqm each pane for fixing to aluminium or wooden joinery work complete all as specified and as directed. |
| 18 | S&F Aluminium anodised powder coated of any colour (thickness of powder coating not less than 50 micron) Deco grill DG 202 with aperature size 60mmX45 mm fixed with suitable channel towindows/ventelatorand other fixing arrangementscomplete all as specified and as directed. |
| 19 | S&F 5.5 mm thickfrostedglass, ordinary quality in squares exceeding 0.5 sqm each pane for fixing to aluminium or wooden joinery work complete all as specified and as directed. |
| 20 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 21 | S&F 110 mm borePVC (SWR) soil, waste and vent pipes single socketed in any length with adhesive joints, fixed to wallscomplete all as specified and as directed. |
| 22 | S&F 110 mm bore PVC (SWR) bend any radius complete all as specified & directed. |
| 23 | S&F 110 mm bore PVC (SWR) bend any radiuscomplete all as specified and as directed. |
| 24 | S&F 110 mm borePVC (SWR) branch pieces single Y equal or unequal complete all as specified and directed |
| 25 | S&F 110 mm bore PVC (SWR) junction single, (single T) equal or unequal complete all as specified and as directed. |
| 26 | S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed. |
| 27 | S&F 75 mm borePVC (SWR) soil, waste and vent pipes single socketed in any length with adhesive joints, fixed to wallscomplete all as specified and as directed. |
| 28 | S&F 75 mm bore PVC (SWR) bend any radiuscomplete all as specified and as directed. |
| 29 | S&F 75 mm bore PVC (SWR) bend with access door complete all as specified and as directed. |
| 30 | S&F 75 mm borePVC (SWR) branch pieces single Y equal or unequal complete all as specified and directed |
| 31 | S&F 75mm bore PVC (SWR) junction single, (single T) equal or unequal complete all as specified and as directed. |
| 32 | S&F 75 mm bore PVC (SWR) vent cowl complete all as specified and as directed. |
| 33 | Supply onlyin repair stack clamps for 110 mm pipemade out of 50 mmx 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed. |
| 34 | Supply only in repair stack clamps for 75 mm pipemade out of 50 mmx 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed. |
| 35 | Taking up or down15 mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed. |
| 36 | Taking up or down20 mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed. |
| 37 | Fixing only 15 mm boreold galvanised iron steel tubing and connections in new or old position (Walls, ceiling, floors, etc) complete all as specified and as directed. |
| 38 | Fixing only 20 mm boreold galvanised iron steel tubing and connections in new or old position (walls, ceiling, floors, etc) complete all as specified and as directed. |
| 39 | S&F 15 mm bore galvanised iron tubes, "medium grade" with all fittings such as bends, elbow. reducer, socket etc and fixed complete to walls and ceilingsor laid in floorcomplete all as specified and as directed. |
| 40 | S&F 20 mm bore galvanised iron tubes, "medium grade" with all fittings such as bends, elbow. reducer, socket etc and fixed complete to walls and ceilingsor laid in floorcomplete all as specified and as directed. |
| 41 | S&F in repair 15 mm boregun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 42 | S&F in repair 20 mm boregun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 43 | S&F in repair vitreous china wash down water closet pan (Pedestal pattern) ,whiteincluding fixing bolts(excluding flushing cistern & Pipe) includingnecessary connection to trap and flushing pipe complete all as specified and as directed. |
| 44 | S&F in repair health faucet 1.5m tube with hook and including all necessary fitting complete all as specified and as directed. Make:- Prayag Cat No 1881 |
| 45 | S&F in repairPVC lowlevelflushingcisternof 10 litre capacityfixed including syphonic action type,ball valve,floatand handle including brackets etc complete all as specified and as directed. |
| 46 | S&F in repairs PVC seat cover white colour with flat bottom including CP hinges complete all as specified and directed. |
| 47 | S&F in repair PVC connections 15mm size with PTMT nuts and washers of length 600mmcomplete all as specified and as directed. |
| 48 | S&F in repair grating doom125 mm dia of PTMT (minimum weight 40 gms) complete all as specified and as directed. |
| 49 | S&F in repair 75 mm diameter of outletPVC (SWR) floor trap with grating including jointing with solvent cementcomplete all as specified and as directed. |
| 50 | S&F in repair 15 mm bore dia stop valves ,cast copper alloy screwed down, high presure , with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixedcomplete all as specified and as directed. |
| 51 | S&F in repair 15 mm bore dia stop valves ,fancy type , chromium plated with long shank and cup (concealed type) , with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 52 | S&F in repairBrass chromium plated shower roseof size 125 mm with swivel jointfor fixing to GI pipe of 15mm diacomplete all as specified and directed. |
| 53 | S&F in repair15mmbore dia, Bib taps chromium plated , fancy typescrewed down for iron pipeand fixed complete all as specified and directed.. |
| 54 | S&F in repair 15 mm bore , Bib tapstandered of PTMT any colour screwed, for iron pipe and fixed (minimum weight- 90gms) complete all as specified and as directed. |
| 55 | S&F in repair 600mmX450mm bevelled edge looking mirror of sizeof selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixedto wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 56 | S&F in repairvitreous china wash hand basin,white, flat back of size 630mm X 450mm with brackets complete all as specified and as directed. |
| 57 | S&F in repair waste couplingsuitable for 40 mm bore dia of pipeofPTMT (half or full threaded) (minimum weight -60 gms) complete all as specified and as directed. |
| 58 | S&F 32 mm dia size PVC waste pipe with cup head for wash hand basin/sink/urinalcomplete all as specifiedand as directed. Make :- Prayag cat No 329. |
| 59 | S&F in repair Brass chromium platedtubular towal rail, 20mm dia , D type, 600mm long complete all as specified and directed. |
| 60 | S&F in repair 15 mmbore dia CP pillar tap ofcast copper alloy, fancy type screwed down high pressure, with long screwed shank and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 61 | S&F in repair vitreous china urinal bowl flat back of size 465 X 355 X 265mm white (minimum) with grating,union and waste coupling including fixing plugs, beding urinal against wall in cement mortar 1:2 securing urinals to plugs including 60mm long brass screws, pointing around urinal back in cementcomplete all as specified and as directed. |
| 62 | S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms) complete all as specified and as directed. |
| 63 | S&F in repair 100 mm diameter of outlet of Cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete1:2:4 type B-1 using 20 mm graded stone aggregate complete all as specified and as directed. |
| 64 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not packing) removing of serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 65 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and applying cement slurry @3 kg/Sqm complete all as specified and as directed. |
| 66 | M&L Non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match withincluding 15mm thick screed bedin cement mortar 1:4 complete all as specified and as directed. |
| 67 | M&L for Glazed ceramic coloured tiles in vertical surface 300mmx200mmx 6 to 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchwith including 10mm thick rendering in cement mortar1:4 complete all as specified and as directed. |
| 68 | M&L Non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match withincluding 15mm thick screed bedin cement mortar 1:4 complete all as specified and as directed. |
| 69 | Demolition of brick or stone masonary work built in cement mortar including all quoins ,arches,pillars etc complete all as specified and as directed. |
| 70 | M&L for brick work with fly ash bricks, straight or curved on plain exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 71 | M&L for brickwork with fly ash bricks, straight or curved on plan to any radiusas in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed. |
| 72 | Taking down existing waterproofing treatment complete of any description from brick or RCC wall and RCC slab by scrapping including removal of rubbish where directed to a distance not exceeding 100M complete all as specified and as directed. |
| 73 | M&L for 10mm thick screedbed or bedding layer in cement mortar 1:4 on concrete,brick surfaces surface finished even and smooth without using extra cement to receive roof treatment, mixed with water proofing compound @2% by weight of cement over and including a neat cement slurry @ 3 Kg/Sqm , complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid seperately under respective item. |
| 74 | M&L for water proofing roof treatment with APP based polymeric membrane of minimum weighing 3kg and minimum 3 mm thick andreinforced with polyster non woven fabric matt (weight not less than 150 gm/sqm), laid with LPG torch forced application over roof surface, with a side & end overlaps of minimum 100 mm, with and including priming the surfaceby bitumineous primer@0.5 litre per Sqm,applying with a coat of hot blown bitumen of grade 85/25 @ 1.2 kg/Sqm each atbottom and top ofthe membrane as bonding material and a coat of bituminous basedaluminium primer @ 100 gm/Sqm on top including sealing all joints by thermo fusion complete all as per manufacturer"s instructions complete all as specified and as directed. |
| 75 | Taking down cement plaster on brick or stone wall or on concrete surfaces including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed. |
| 76 | M&L 15 mm thickrenderingonbrick work, concretesurfaces or stonewall surface in cement mortar 1:4 mixed with water proofing compound @ 3% by weight of cement , surface finished even and fair complete all as specified and as directed. Note:-Water proofing compound shall be measured and paid separately under respective item. |
| 77 | M&L 10 mm thick renderingon ofbrickwork or concrete surfaces in cement mortar 1:4 on wall ,surface finishedeven and fair complete all as specified and as directed. |
| 78 | M&L 5 mm thick renderingon ofbrickwork or concrete surfaces in cement mortar 1:3 on ceiling,surface finishedeven and fair complete all as specified and as directed. |
| 79 | M&L for applying two coats of weather proof acrylic emulsion paint exterior grade (100% acrylic) of silver steak shade of asian paint over a coat of primer on prepared external surfaces of walls of any description over10 cm width or girth including applying 1 mm thick wall care putty complete all as specified and as directed. |
| 80 | M&L for applying two coats of oil bound distemper over a coat of alkali resistant primerover1 mm thick wall care putty on newly plastered surfaces of wall complete all as specified and as directed. |
| 81 | M&L for applying three coat of white washon ceiling including preparation of newly plastered surfaces ofceiling complete all as specified and as directed. |
| 82 | M&L for applying two coats of oil bound distemper over a coat of alkali resistant primerover1 mm thick wall care puttyincluding complete removal of existing old decoratedsurface of wall complete all as specified and as directed. |
| 83 | M&L for applying one coat of white on wall including preperation of olddecorated surfaces of walls bybrooming down or steel wire brushing, scraping down smoke soot,moulds, moss and efflorescent salts and trading oil and greasy spotsetc complete all as specified and as directed. |
| 84 | M&L forpreparation of old plastered decorated surfaces of external walls by brooming down or steel wire brushing, scraping down smoke soot,moulds, moss and efflorescent salts and trading oil and greasy spots of anydescription over10cm width / girth and applyingone coat ofweather proofacrylicemulsion paint, exteriorgrade (100% acrylic first quality) of approved shade as per manufacturers instructions and also rewrite the bldg No. as per existing font style and size with enamel paintof approved shade complete all as specified and as directed. |
| 85 | Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 86 | M&L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including15 mm thick screed bed or bedding layerin cement mortar 1:4 complete all as specified and as directed. |
| 87 | Rounding for edges of stone slab one edge, such as in steps cooking platform and other similar work complete all as specified and as directed. |
| 88 | Demolition of cement concrete (unreinforced) as roofs, floors (other than ground floors), beams, staircase, landing, chajjas and similar suspended work etc complete all as specified and as directed. |
| 89 | M&L for water proofing treatment to sunken surface complete all as specified and asdirected with the followings specification:- (i) Applying evenly a tack coat of industrial Bitumen 85/25 at the rate of 1.2 Kg per sqm over the prepared surfaces. (ii) Apply APP modified polymeric membrane of weight not less than 3.0 Kg/sqm laid and bonded to the sub strata by heat process, over laps of 100mm shall be sealed/fused by flame torch application as per manufacturer instructions. (iii) Applying evenly a tack coat of industrial Bitumen 85/25 at the rate of 1.2 Kg per sqm over the membrane |
| 90 | M&L PCC 1:5:10 type E-2 using 40 mm graded stone aggregateas in mass concreteas in sunken filling complete all as specifiedand as directed. |
| 91 | M&L 50mm thick cement concrete1:2:4type B-1 using 20mm graded stoneaggregate as in Sunken floorfinishing cement concrete surface even and fair without using extra cement mixed with water proofing compound @ 3% by weight of cement complete all as specified and as directed. Note : WPC shall be measured and paid separately under respactive item. |
| 92 | S&F 1000 Litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in positionincluding provision of inlet, outlet, overflow and wash out connections complete all as specified and as directed. |
| 93 | S&F25 mm bore diaball valve , high pressureof PTMT with epoxy coatedAluminium rodand high density plastic ballscrewed for iron pipe and fixed (mininimum weight -455 gms) complete all as specified and as directed. |
| 94 | Supply only water proofing compound complete all as specified and as directed. |
| 95 | S&F in repair15 mm bore Angle stop valve of PTMT any colourhigh pressure screwedfor iron pipe & fixed (minimum weight 15mm-90gms)complete all as specified and as directed. |
| 96 | S&F in repair stainless steel sink with draining boardmade outof 1.0 mmthicksheetfor kitchenwith plug , washerswaste pipe , cast ironcantilever bracketsconnectingunionoverall size915mmX460mmwith bowl size410mmX330mmX160mm completeall asspecified and asdirected . |
| 97 | S&F in repairsoap tray fixed with screwto the wallcomplete all as specified and as directed. Make : -PrayagCat No BA-05 . |
| 98 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. |
| 99 | M&L for applying two coat of white washing on ceilingincluding preparation of old decorated surfaceof ceiling complete all specified and directed, |
| 100 | Taking down carefully copper/ aluminium point wiring for light, fan, socket or power point complete with fittings such as switches, fan regulators, light fittings, tube light fittings, bracket light fittings and ceilling rose, holders etc including making good the disturbed surface of walls,ceiling etc complete all as specified and as directed. |
| 101 | M & L for point wiring with PVC FRLS insulated unsheathed multi stranded copper conductor cable of size 1.5 sqmm drawn through inincluding concealed PVC conduit not less than 20mm dia withpressed steel concealedbox made out of mild steel sheetnot less than 1.6 mm thick sheet duly covered with 3 mm thick laminated sheet ISI markedsuitable ffor mounting switch,socket etcand all accessoriesincluding 1.5 sqmm copper conductor FRLS cable for earth continuity conductor of green colour for one light point/ fan point/ exhaust fan/ bell point/one 5/6 Amp socket outletcontrolled by one 5/6 Amps one way switch complete all as specified and as directed. |
| 102 | All as per item No 101 above but for onelight point of stair case controlled by two 2- way switch complete all as specified and as directed. |
| 103 | All as per item No. 101 here-in-before but for 15/16Ampsocket out let, independent with 2.5 sqmm copper cable of PVC FRLS insulated, unsheathed, multi stranded and 2.5 sqmm copper conductor cable FRLS as earth continuity conductor of green colourcomplete all as specified and as directed. |
| 104 | Taking down carefully sub main wiring including batten/ conduit byunscrewing from wall,ceiling and making good surfaces to match with existing complete all as specified andas directed. |
| 105 | M&L sub main wiring withtwo runs of 4 sqmm PVC FRLS insulated unsheathed copper cable multistand 1100 Volt and one run of copper earth wire 4 sqmm PVC FRLS drawn in and including concealed conduit not less than 25mm diaincluding making good to existing surface complete all as specified and as directed. Note:- 2 runs of 4 sqmm copper cable, one run of 4 sqmm copper earth wire and one run of conduit shall be measured as one unit length. |
| 106 | M&L sub main wiring withtwo runs of 6 sqmm PVC FRLS insulated unsheathed copper cable multistand 1100 Volt and one run of copper earth wire 6 sqmm PVC FRLS drawn in and including concealed conduit not less than 25mm diaincluding making good to existing surface complete all as specified and as directed. Note:- 2 runs of 6 sqmm copper cable, one run of 6 sqmm copper earth wire and one run of conduit shall be measured as one unit length. |
| 107 | M&L sub main wiring withfour runs of 6 sqmm PVC FRLS insulated unsheathed copper cable multistand 1100 Volt and one run of copper earth wire 6 sqmm PVC FRLS drawn in and including concealed conduit not less than 32 mm diaincluding making good to existing surface complete all as specified and as directed. Note:- 4 runs of 6 sqmm copper cable, one run of 6 sqmm copper earth wire and one run of conduit shall be measured as one unit length. |
| 108 | S&F switch piano,flush type,single pole,one way, 5/6 Amp, complete all as specified and as directed. |
| 109 | S&F switch piano,flush type,single pole,two way, 5/6 Amp, complete all as specified and as directed. |
| 110 | S&F switch socket combination 2 pin & 3 pin 5 Amp,230 volt,multipurpose,complete all as specified and as directed. |
| 111 | S&F switch socket combination 5 in 1 type, 3 pin 5 / 15 Amp,230 volt,multipurpose,complete all as specified and as directed. |
| 112 | S&F ceiling rose, surface Bakelite 65mm x 30mm, three terminals including PVC mounting box of size 3"x3" complete all as specified and as directed. |
| 113 | S&F five stepped socket type electronic fan regulatorfor ceiling fan of any sweep including necessary connection complete all as specified and as directed. |
| 114 | M&L forspray painting with white synthetic enamel paint including preparation of old surface of the ceiling fan of any make/model/sweep, filling cavities with filler after cleaning dustin situ or in other position complete all as specified and as directed. Make :- Berger paint(Luxol)/Asian paint (Apcolite) / Jenson & Nicholson paint Ltd (Brolac) |
| 115 | Taking down defective ceiling fan from its position and refixing the same after necessary minor repair to make its functional complete all as specified and as directed. |
| 116 | M&L forrewinding of ceiling fan motor of1200 mm sweep of any makewith super enameled copper wire of existinggauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts and washers, split pins etc complete all as specified and as directed |
| 117 | S&F in replacement of ball bearing 6201 / 6202 / 6203including metal filling, machining if required complete all as specified and as directed. Make :- SKF/NBC as approved |
| 118 | S&F in replacement of canopy (upper and lower) to match the existing make /model ofceiling fan as per site complete all as specified and as directed. |
| 119 | S&F in replacement of gun metal bush, suitable for any make and sweep ceiling fan complete as specified and as directed . |
| 120 | S&F in replacement of fan clamp with nuts , bolts and rubber bush suitable for ceiling fan of any sweep and make complete all as specified and as directed. |
| 121 | S&F in repaircapacitor/ condenser of ceiling fan 2.5 mfdof approved make complete all as specified and as directed. Make :- Nicco/Havells/Universal |
| 122 | S&F Exhaust fan 300 mm sweep, 900 RPM, metal body heavy duty, AC single phase,230 Vincluding louvers andnecessary connectionwith multistanded copper conductor flexible copper wire of suitable size from ceiling rose to connector of fan and necessary fixing arrangement ie anchor bolts,nuts, washers and making good to the disturbed surfaces to match with the existing complete all as specified and as directed . Make :- Bajaj /Havells/Crompton Greaves /Khaitan/Almonard as approved. |
| 123 | S&F Exhaust fan 450mm sweep, 1400 RPM, metal body heavy duty, AC single phase,230 Vincluding louvers andnecessary connectionwith multistanded copper conductor flexible copper wire of suitable size from ceiling rose to connector of fan and necessary fixing arrangement ie anchor bolts,nuts, washers and making good to the disturbed surfaces to match with the existing complete all as specified and as directed . Make :- Bajaj /Havells/Crompton Greaves /Khaitan/Almonard as approved. |
| 124 | S&F 1X18 Watt tube light fittings with lamp Endura linear LED wall mounted LEDbatten, extruded aluminium heat shrink provided for efficient heat dissipation and intergrated electronic driver complete with LED retrofit T8 polycarbonate tube of capacity 18 Watt with decorative holderincluding connectionwith three core twisted flexible copper conductor cable of suitable size upto ceiling rosecomplete all as specified and as directed. Make:- Philips Cat Part No.BN021CLED22S PSU CW GR or Havells Cat Part No LUMILINEBS18WLED865SPCWH as approved. |
| 125 | S&F 9 W LED tubelight fitting with lamp, Endura linear LED wall mounted LED batten, exruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver with complete fitting including connectionwith three core twisted flexible copper conductor cable of suitable size upto ceiling rosecomplete all as specified and as directed. Make: Havells Cat Part No LUMILINEBS9WLED865SPCWH or equivalent in Bajaj/Philips as approved. |
| 126 | S&F 1x28/30 watt indoor type 2x2 recess mounted LED luminaries with high brightness including connecting up with twisted flexible copper conductor cable with suitable size upto ceiling rose complete all as specified and as directed. Make : Havells Cat Part No. PLUTONEO2X2PLR28WLED857S and BAJAJ cat No BZRSQL 30W GZI WHor equivalent in Philips or Wiproas approved. |
| 127 | Taking down carefullyexisting unserviceable MCB DBs with MCBs any type byunscrewing from wall,ceiling and making good surfaces to match with the existing complete all as specified andas directed. |
| 128 | S&F factory made sheet metal enclosure for DBs double door fixed flush to the wall, SPN, 240 volt,8 way, IP-42 protection with 200 Amp rated bus bar and 1.5 sqmm copper PVC sheathedstranded cable for earth continuity and suitable for housing MCB’s complete all as specified and as directed. Make:- C&S Electric Ltd /Standard/Havells |
| 129 | S&F sheet metal enclosure singlepole and neutral with two pin and earth plug and socket complete with on single pole MCB 20 Amp completecomplete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells. |
| 130 | S&F MCB 6 to 32 Amp, 240 Volt, SP, breaking capacity 10 KA "C" series,complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells. |
| 131 | S&F MCB 6 to 32 Amp, 240 Volt, SP, breaking capacity 10 KA "C" series,complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells. |
| 132 | S&F Factory made sheet metal enclosure for DBs double door (fixed flush to the wall), TPN, 415 volt,4 Way, IP-42 protection with 200 Amp rated bus bar and 6.0 sqmm copper PVC sheathed stranded cable for earth continuity and suitable for housing MCB’s complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells. |
| 133 | S&F factory made sheet metal enclosure for DBs double door fixed flush to the wall, SPN, 240 volt,4 way, IP-42 protection with 200 Amp rated bus bar and 1.5 sqmm copper PVC sheathedstranded cable for earth continuity and suitable for housing MCB’s complete all as specified and as directed. Make:- C&S Electric Ltd /Standard/Havells |
| 134 | Taking down carefully old unserviceable MCBany type by unscrewing from wall, ceiling and making good surfaces to match with existing complete all as specified and as directed. |
| 135 | S&F 100 Amp isolator four pole , 415 Volt,50 Hz complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells. |
| 136 | S&F 63 Amp Isolator four pole ,415 Volt, 50 Hzcomplete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells. |
| 137 | S&F Verticaltype DBs with MCCB 8 way including provn of250 Amp MCCB, 4 pole,36 KA asIncomer complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells. |
| 138 | S&F in replacement of 200 Amp MCCB , 4 Pole, 36 KA,415 V, 50 Hz.Complete all as specifed and as directed. Make:- C&S Electric Ltd/Standard/Havells. |
| 139 | M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directlyin ground(earth pit not less than 2.25 M deep below ground level ) with top edge of the plate not less than 1.5 M below normal ground level, connected to galvanised earth lead wire 4.0 mm dia upto 7.5 M in length from earth plateby means of bolts, nuts, check nuts and washers of galvanisediron or steel all as shown in electrical plate No 3 of SSR Part-2009, connected to earthing with DBs all as specified including excavation and earth work in any type of soil, PCC 1:3:6 type C-1 using 20mm graded stone aggregate in chamber and40mm thick RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slab, reinforced, with 8mm dia TMT bar at 150mm c/c both ways, 15mm dia GI pipe light grade for earth lead protection, 20mm dia GI medium grade pipe for watering ,funnel etc complete all as specified and testing on completion. |
| 140 | S&F in replacement of LED street light25Watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having top opening separate driver compartment with IP66 protection and impact resistance of IK07 complete all as specified and as directed . Make :- Bajaj Cat Part No. ENXT P 30L WH CRPCSD 25W or Havells Cat Part No VILUNASUNDOWNSL25WLED765PASYBOPCIHD or as approved. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
