Supply Installation Testing And Commissioning Of Lift Construction Of Composite Office Building ( G3 ) For Consumer Affairs Department At Berhampore In The District Of Murshidabad- 1 Sitc Of Automatic Lift ( As Per Manufacturer Design & As, berhampore-West Bengal

Supply Installation Testing And Commissioning Of Lift Construction Of Composite Office Building ( G3 ) For Consumer Affairs Department At Berhampore In The District Of Murshidabad- 1 Sitc Of Automatic Lift ( As Per Manufacturer Design & As Per Detailed Specification Below ) 2 Make : Otis / Kone / Schindler 3 Type: Passenger Lift 4 Load 10 Passenger / 680Kg 5 Control: Microproccer Based With Ac Variable Voltage & Variable Fequency ( Vvvf ) 6 Machine:- Energy Efficientmachine, Gearless With Machine Room 7 Position Of Machine Room: Directly Above The Shaft 8 Speed: 1.0 Mtrs. / Sec 9 Floor Served: G+3 10 Landing: 4, All On Same Side 11 Total Rise: 14Mtr ( Approx ) 12 Operation: Microprocessor Based Simplex Full Collective With Or Without Attendant 13 Signals: Digital Car Position Indicator, Car Travels Direction Indicator In Car & At All Landing With Call Registration Indicator 14 Leveling Accuracy +- 5 Mm ( Micro Leveling ) 15 Car 16 Car Inside: 1300Mm ( W ) X 1350Mm ( D ) 17 Car Entrance: Clear Opening 900Mm ( W ) X 2000Mm ( H ) Protected With Car Door 18 Car Enclosure: Stainless Steel Sheet ( 20 Swg ) With Hairline Finish With Hand Rail 19 Car Ceiling & Lighting: Stainless Steel With Hairline Finish With Led Lighting And Fan 20 Car Ventilation : Pressure Fan With Anodised Aluminium Grill. 21 Car Flooring: Car Flooring: Decorative Granite Flooring ( As Per Direction Of Eic And According To This DepartmentS Order ) . 22 Car Door: Stainless Steel Centre Opening Automatic Door Provided With V3f Controlled Door Drive System 23 Landing Door: Stainless Steel Centre Opening Automatic Door Provided With V3f Controlled Door Drive System 24 Door Opening: Automatic Power Operated Door With Full Length Photo Cell Assembly Light Curtain Sensor 25 Protective Devices & Other Acessories 26 Ard: Automatic Rescue Device Complete With Dry Maintenance Free Batteries As Required. For Automatic Evacuation To The Nearest Floor In Case Of Power Failure / Single Phasing / Others. 27 Overload Protection: Fully Loaded With Overload Protection. On Overloading The Lift Car Will Not Start With Door Remaining Open And Give Audio Display Indication 28 Emergency Lighting In Car: Battery Operated Emergency Lighting In The Lift Car 29 Intercom System: Battery Operated Intercom System In Lift Car, Machine Room & Control Room 30 Emergency Alarm: Battery Operated Alarm Bell System In Lift Car And Control Room 31 Fireman Switch: Fireman Switch At Main Landing Terminal 32 Voice Synthesizer: Voice Announcement System ( Voice Synthesizer ) In The Car To Announce The Position Of The Elevator In The Hoist Way As The Car Passes Or Stops At A Floor Served By The Elevator 33 Main Rope - As Per ManufacturerS Standrad Conforming To Is. 34 Dimension Of Sheet & Power Supply 35 Available Shaft Dimension : 1900Mm X 2100Mm 36 Pit Depth: 1350Mm ( Bidder Should Visit The Site ) 37 Overhead: 4200Mm ( Bidder Should Visit The Site ) 38 Machine Room :3000 Mm Wide4525mm Deep2500 Mm Height ( Aprox ) 39 Electric Power Supply: Ac 415 Volt 3Phase, 50Hz, Terminated In Machine Room As Per Is 40 Terms And Condition 41 The Agency Must Procure The Materials From The Manufacturer / Oem Or From Their Authorised Sales Channel So That The Standard Warranty / Support Of The Manufacturer / Oem Becomes Applicable To The Products To Be Delivered And Installed By Them. 42 Documents That Authenticates Such Procurement From The Manufacturer / Oem Or From Their Authorized Sales Channel And Standard Warranty / Support Should Be Sent From The E-Mail Of The Manufacturer / Oem / Authorized Sales Channel To The E-Mail Of Engineer-In-Charge And Hard Copy Of It To Be Submitted During Execution, Of Work / Submission Of Bill.If Any Refurbished Material Is Supplied And Installed, Penal Action Will Be Taken As Per Existing Rules

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	09-02-2022	Time Extension	Date	22-02-2022
2	18-02-2022	Time Extension2	Date	26-02-2022
3	28-02-2022	Time Extension3	Date	08-03-2022

Refer document

INR 20000.0 /-

Refer document