}

Construction Const Of Shed In Swargdham Rania Shed, rania-Haryana

Municipal Corporation-MC has published Construction Const Of Shed In Swargdham Rania Shed. Submission Date for this Tender is 24-01-2022. Shed Construction Tenders in rania Haryana. Bidders can get complete Tender details and download the document.




Tender Notice

30753694
Construction Const Of Shed In Swargdham Rania Shed
Open Tender
Indian
Haryana
rania
24-01-2022

Tender Details

Construction Const Of Shed In Swargdham Rania Shed

Key Value

Document Fees
INR 1000 /-
EMD
INR 9980.0 /-
Tender Value
INR 4.99 Lakhs /-

BOQ Items

Name of Work: CONST. OF SHED IN SWARGDHAM, RANIA
Sl. No. Item Description
1Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead up to 50 m and lift up to 1.5 m HSR 4.8.1
2Providing and Laying 1:5:10 (1 cement : 5 coarse sand (zone-Ill) : 10 graded stone aggregate 40 mm nominal size). HSR 6.2.4
3Provding and Laying 1 : 1. 5: 3 ( 1 cement : 1. 5 coarse sand (zone-Ill): 3 cum graded stone aggregate 20 mm nominal size HSR 6.14.1
4Structural steel work riveted, bolted or welded in built up sections, trussesand framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. HSR 13.28
5Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. HSR 9.33
6Painting Steel work with Deluxe Multi Surface Paint to give aneven shade. Two or more coat applied@ 0.90 litre/10 sqm over an under coat of primer applied @ 0.80 litre/1 O sqm of approved brand and manufacture HSR 11.97.3
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail