}

Construction Phc Building At Morla In Tehsil Dharampur Distt. Mandi ( H.P. ) Building Portion, Water Supply , Sanitary Installation, Septic Tank , Rain Harvesting Tank, Site Development And Solar Water Heating System, dharampur-Himachal Pradesh

Public Works Department-PWD has published Construction Phc Building At Morla In Tehsil Dharampur Distt. Mandi ( H.P. ) Building Portion, Water Supply , Sanitary Installation, Septic Tank , Rain Harvesting Tank, Site Development And Solar Water Heating System. Submission Date for this Tender is 24-01-2022. Building Work Tenders in dharampur Himachal Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

30744599
Construction Phc Building At Morla In Tehsil Dharampur Distt. Mandi ( H.P. ) Building Portion, Water Supply , Sanitary Installation, Septic Tank , Rain Harvesting Tank, Site Development And Solar Water Heating System
Open Tender
Indian
Himachal Pradesh
dharampur
24-01-2022

Tender Details

Construction Phc Building At Morla In Tehsil Dharampur Distt. Mandi ( H.P. ) Building Portion, Water Supply , Sanitary Installation, Septic Tank , Rain Harvesting Tank, Site Development And Solar Water Heating System

Key Value

Document Fees
INR 5000 /-
EMD
INR 214000.0 /-
Tender Value
INR 1.81 Crore /-

BOQ Items

Name of Work:Construction PHCbuildingat Morla in Tehsil DharampurDistt. Mandi (H.P.)(SH :-Building Portion, Water Supply & Sanitary installation, Septic Tank , Rain Harvesting Tank,Site development and Solar water heating system)
Sl. No. Item Description
1Excavation in hilly areas in all heights and depths and in all kinds of soil by manual/mechanical means including saturated soil comprising of ordinary soil, soft rocks, hard rocks, chiseling/wedging out of rock (where blasting is prohibited) and other intermediate classification of soil, setting out true to the required lines, grades width cutting and trimming of side slopes and level as shown in the drawing and as directed by the Engineer-in-Charge at site according to the MORD technical specification 2014 clause 1603.1, 1603.2 and sorting out useful materials and stacking the same in all leads and lifts in acquired width of the road and transportation of un-useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus un-useful material to acquired width of the road or on approved dumping sites through all modes of transportation including head load or animals transport or mechanical means alongwith its leveling fine dressing and carriage of machineries, materials, tools equipments and safety measures and other incidentals necessary to complete the work by mechanical means and/or labour if required.Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases as per direction of the Engineer-in-Charge including carriage of material within all leads and lifts. A recovery of useful stone for 346.17cum (Three hundred forty six decimalone seven) cubic metre@ Rs. 300/- (RupeesThree hundred only)per cubic metre shall be effected on pro-rata basis in each running bill from this item. The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
2Excavation in foundation, trenches etcetera in all classification of soil such as pick work, jumper work, blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry or saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as perdirected by the Engineer-in-Charge including entire carriage of material with in all leadsand lifts, disposed materials to be neatly dressed and levelled including other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
3Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rocks, chiseling/wedging out of rocks (where blasting is prohibited) as per drawings and technical specification clause 305.1 and as per direction of the Engineer-in-Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto all leads and lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm (One hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per the direction of the Engineer-in-Charge and carriage of material within all leads and lifts and other incidentalsThe rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GSTor other taxes imposed by the Government.
4Excavating trenches of required width for pipes, cables, etc in all classification of soil such as pick work, jumper work, blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry or saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as perdirected by the Engineer-in-Charge including entire carriage of material with in all leadsand lifts, disposed materials to be neatly dressed and levelled including other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
5Filling in plinth with sand under floors including watering ramming consolidating and dressing completeincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
6Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frame of30x30x5mm (Thirty into thirty into five millimetre) size so as to give a fair finish including centring, shuttering, strutting andproppingand centringetc etera with wooden battens and ballies in all heights of propping and centring below supporting floor to ceiling not exceeding 4 (four)meters and removal of the same for insitu-reinforced concreteand plain concrete work upto all floor level in all heights including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
7In foundation,footings bases of columns etceteraand mass concrete.
8In flat surfaces such as soffits of suspended floors, roofs, landings balconies and access platformand the like floor upto any thickness upto all floor levels.
9In columns, pillars posts and struts square rectangular or polygonal in plan upto all floor levels.
10In beams, cantilevers, girders and lintels, sides and soffits of beams, beams haunchingcantilevers bressumers and lintels in all depth /height not exceeding 1 (one) metre depths upto all floor levels
11Vertical surfaces such as walls (any thickness) partition and the like includingattached pillasters, buttresses plinth andstring courses and the like in all floor heights.
12Stair Casewith sloping orstepped soffits excluding landing except spiral stair upto all floor level.
13Providing and layingin positioncement concrete of specified grade mechanically mixedcement concrete 1:4:8 (One cement: four sand: eight graded/crushed stone aggregate 40mm (Forty millimetre) nominal size) as per specificationand curing complete but excluding cost of form work in all workincluding all heights/depths including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
14Providing and layingin positioncement concrete of specified grade mechanically mixedcement concrete 1:4:8 (One cement: four sand: eight graded/crushed stone aggregate 20mm (Twenty millimetre) nominal size) as per specificationand curing complete but excluding cost of form work in all work up to plinth level including all heights/depths including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
15Providing and laying mechanically mixed 1:5:10 (one cement :five coarse sand : ten)graded crushedstone aggregate 40 mm(forty millimetres) nominal size cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to all floor height excluding the cost of centering, shuttering and finishing in all respectincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
16Providing and layingMechanically mixed and vibrated plain cement concrete M-10 (ten) graded crushed stone aggregate 40 mm (forty millimetre) nominal size) in open foundations andplinths or similar works complete as per drawingsandtechnicalspecificationforrural roads clause 802, 803, 1202 and 1203 and curing complete including the cost of form workincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
17Providing weep holes in brick masonry/stone masonry, plain / reinforced concrete abutment, wing walls, return walls, retaining walls and Breast wallswith 110mm (One hundredten millimeter) diameter PVC Pipe made of D-plast finolexhaving working pressure not less than 4.50 Kg P/sq cm (four point five Killogramme per Squarecentimetres) extending through the full width of structures with slope of 1 one (Vertical) : 20 ( Twenty)(Horizontal) towards drawing face complete up to all height as per drawing and technical specifications clauses 614, 709, 1204.3.7including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
18Providing and laying Reinforced cement concretemechnically mixed vibrated design mix M-25(twenty five) grade cement concrete for reinforced cement concrete work to obtained minium crushing strength of 25N/mm2 (Twenty five ) Newton per millimetres square) with minium cement contents of 400Kg/Cum (Four hundredkillogramme per Cubic metres)using cement content as per approved design mix and curring completeall work up to plinth level excluding the cost of centering, shuttering,including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
19Providing and laying Reinforced cement concretemechnically mixed vibrated design mix M-25(twenty five) grade cement concrete for reinforced cement concrete work to obtained minium crushing strength of 25N/mm2 (Twenty five ) Newton per millimetres square) with minium cement contents of 400Kg/Cum (Four hundredkillogramme per Cubic metres)using cement content as per approved design mix and curring complete above plinthlevelexcluding costof centring shuttering finishing and reinforcement including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
20Providing and laying Reinforced cement concretemechnically mixed vibrated design mix M-25(twenty five) grade cement concrete for reinforced cement concrete work to obtained minium crushing strength of 25N/mm2 (Twenty five ) Newton per millimetres square) with minium cement contents of 400Kg/Cum (Four hundredkillogramme per Cubic metres)using cement content as per approved design mix and curring complete work in beams, suspended floors, roofs having slope up to 15° (fifteen) Degreeincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
21Providing and laying Mild steel and Medium Tensile steel bars Fe 500Dmade of TATA Tiscon steel for reinforcedcement concrete work including straightening, cutting, bending, placing in position and binding allcomplete uptoplinth levelincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
22Providing and laying Mild steel and Medium Tensile steel bars Fe 500Dmade ofTATA Tisconsteel for reinforcedcement concrete work including straightening, cutting, bending, placing in position and binding allcomplete aboveplinth level upto all floor levelsincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
23Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5( seven point five)in superstructure above plinth level upto all floor level in all shapes and sizein cement mortar 1:6 (onecement : six coarse sand) curing complete including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
24Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five)in superstructure above plinth level up to all floor levelsinCement Mortar 1:3( One cement: three coarsesand)and curing completeincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
25Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement :sixsand : Twelvegraded stone aggregate 20(Twenty) Millimetres nominal size) with Cement Mortar 1:6( One cement: Sixsand) and curing complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
26Stone filling /Solingunder floors tightlyhand packedupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
27Back filling behind abutment , wing walls andreturn walls complete as per drawings and technical specification Clause 1204.3.8. with Granular Materialincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications as perdirection of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
28Providing and fixing ISI marked 35mm(Thirty five)millimeres thick flush door shutters conforming to IS :2202 (PartI) decorative type ,core of block board construction with frame Ist class hard wood and well matched teak 3 (three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
29Providing and fixing fly proof galvanised MS wire gauge using wire gauge with average width of aperture 1.4 mm (one point four millimetre) in both direction with wire of dia0.63mm ( zero point sixty three millimetre)for doors, windows and clearestory windows including Ist class devodar wood beading size of 62x19mm (Sixty two into ninteen millimetre)of approved quality and shape section with necessary steel screws inluding applying a priming coat of red lead paint complete as per approved specification / design.including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
30Providing and fixing 300×16mm (Three hundred into sixteen millimetre) nominal sizeaaluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10(ten) as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete upto all floor levelsincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.TThe rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
31Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10(ten) as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. completeupto all floor levelsincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
32200x10 mm ( Two hundred into tenmillimetres)
33150x10 mm ( Onehundred fifty into ten millimetres)
34100x10 mm ( Onehundred into ten millimetres)
35Providing and fixing125mm (one hundred twenty five millimetres) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent or dyed to required colour or shade, withnecessary screws etc completeupto all floor levelsincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
36125 mm ( Two hundredmillimetres)
37100 mm ( Onehundred millimetres)
3875 mm (Seventy fivemillimetre)
39Providing and fixing 19mm thick( ninteenmilimetre) made of action teasa terramite resistant water proof MDF boardconfirming to IS no is 11406:1003 box including shelves and shutters, theback side of cupboard/cabinet of 6mm(Six milimetre) thick ply and cut portions of shelves shall be finished with 6mm six milimetres) hard board edging. The cut portion of shutters from all the sides shall be finished with 12 mm (twelve)millinetresthick hard wood edging. the shutters from out side shall be finished with 1mm (one) millimetresthick laminated of approved shade includng piano hinges and magnetic catcher with all ascessories completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
40Providing and fixing Mild Steel grills of required pattern on wooden/steel frames of windows etcetera with mild steel flats square or round bars with round headed bolts and nuts or by screws/welding in plain grillas per directed by the Engineer-in-Charge includingentire carriage of material with in all leads and lifts and including other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
41Providing and fixing AISI-Grade stainless steel hangingtype floor door stopper ISI marked (anodic coating not less thangrade AC10 (ten) as per IS:1868) transparentand dyed to required colour and shadewith necessary screws etc. complete upto all floor level including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
42Providing and fixing bright finishedD type pullhandlesISI marked in stainless steelwith screws etc. complete upto all floor level including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
43Providing and laying 40 mm (Forty) Millimetres thick Cement concrete flooring 1:2:4 (one cement : two coarse sand : four graded stone aggregate) finished with a floating coat of neat cement, including, but excluding the cost of nosing of steps etc. complete upto all floor level in all heights including entire carriage of material with in all leads liftsand technical specifications as per thedirection of Engineer-in-Charge including other incidentals. he rates are inclusive ofroyality,GSTor other taxes imposed by the Government..
44Proiding and laying precast automatichydraulic compressed polished ISI make No ISI1237 terrazzo tiles20 mm (twenty millimeter) thick with marble chips of specified sizes laid in floors, treads of steps and landings on a bed of 25 mm (twenty five millimeter) average thickness of cement mortar 1:6 (one cement :sixsand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required)incliding rubbing and polishing complete with silver grey shadeand curing completeupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
45Providing and laying blackfinished Granite stone flooring of approved make of Kajaria , Nitco,Somany,Orient,Rak, Johnson and Johnson in desgn and patterns, in landing of stair as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (twenty millimetre)(average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete upto all floor levelas specified and as directed by the Engineer-in-Chargeincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
46White glazed tiles 6(six) millimetres thickmade of Kajaria, Nitco, Somany, Orient, RAK,Jonshan & Jonshan in flooring, treads of steps and landing laid on a bed of 12(twelve )millimetres thick cement mortar 1:3(one cement :threeand) finished with flush pointing in white cementupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
47Providing corrugated0.63 mm (zero point six three ) millimetres thick with zinccoating not less than 275 gm/ m²(Two hundred seventy five grammes per square metres) C.G.I sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm(eight) millimetresdiameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever requiredincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
48Providing ridges or hips of 0.63 mm(zero point six three ) millimetres thick with zinc coating not less than 275 gm/m²(Two hundred seventy five grammes per square metres) width 60 cm (Sixty centimetresoverall width plain painted G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm (eight) millimetresdia G.I. limpet and bitumen washers complete including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
49Providing and fixing 15(fifteen) Centimetres wide 45 (Foryt five) Centimetres overall semicircular0.63 (Zero point six three)millimetresthickplain G.I. sheet gutter with iron brackets 40x3mm (forty into three) size bolts and nuts and washers etc. including making necessary connections with rain water pipe complete as per designupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
50Providing and fixing MS BP Sheet 1.66 to 2.00 (One point sixty six to two ) millimetres thick of TATA/JINDEL make in eaves board/ facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete upto all heights as per instruction of Engineer in Charge ( base members of steel work shall be measured and paid separtely ) upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
51Providing and laying cement water proofing treatment with Dr. FIXIT FAST FLEX6-7sqm/kg (six desh seven square meter per kilogramme) with two component polymer modified comentitious coating consisting of comentitious power and a polimer liquid in two coats for 1st coat clean and salutae surface and then applying a coat of Dr. FIXIT and the same process shall be extended upto 300 mm (three hundred millimeter) vertically the second coat shall be applied in opposite direction after four to six hours of application of firstly coat than sprinkle sand on top surface of applied Dr. FIXIT then apply cement mortar 1:4 ( one cement : four sand) and admixed with 200 ml (two hundred) milliliterof pidiproof LW @ 200 ml ( two hundred)milliliter per 50 kg (fifty kilogramme) bag complete as per architect drawing complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
52Providing and fixing on wall face unplasticised Rigid PVC 110mm ( one hundred ten milimetre ) (Finolex/Supreme confirming to IS 13592)for rain water pipes of working pressure not less than 4.00 kg/square centimetre ( four point zero zero kilogram per square centimetre ) including filling the joints with approved adhesive complete upto all floor level in all heights including carriage of material up to all leads and lifts and as per direction of Engineer in charge.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
53Providing and fixingon wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid uPVC rain water pipes Supreme, AKG, Finolex, Prince, Kisan, SFMC, Diplast conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten milimetre) gap for thermal expansion completeupto all floor level including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government including carriage of material up to all leads and lifts and as per direction of Engineer in charge.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
54110mm (One hundred ten millimetres) nominal sizePVCbend
55110mm (One hundred ten millimetres) nominal sizePVC Shoe
56Providing and fixing 110 mm ( one hundred ten millimetre) unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm (Fifty intoFifty into Fifty) millimetreshard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement : fourcoarse sand) and making good the wall etc. complete upto all heights completeincluding carriage of material up to all leads and lifts and as per direction of Engineer in charge.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
57Steel work welded in built up sections, made of SAIL, Tisco, Rin, Jindal, Pather of(JSPL) Shyam Steelin Gratings, framed guard bars, Ladders, railings , Brackets and Similar work , including cutting, hoisting, fixing in position and applying a priming coat ofred lead paint upto all floor level in all heightscomplete including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
58Structural steel work riveted, bolted or welded in built up sections made of TATA, Trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. upto all floor level in all heightscomplete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals .The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
59Steel work in built up tubular sections made of TATA(round, square or rectangular hollow pipes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. completeupto all floor level in all heights complete including entire carriage of material with in all leads , lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals .The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. .
60Providing and fixing moulded hand rail of M.S. hollow pipe 50mm ( Fifty) millimetresdia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separetely)upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
61Providing and fixing 19mm x19mm & 12X12mm( (Ninteen into ninteen and Twelve into twelve)millimetres MS solid square bar (ballusters) withMS flat of 37.5mmx5mm (thirty seven point five into five) millimetressize complete with a applying priming coat of red lead paint complete upto all floor level including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
62Providing and fixing glass pane shutter in Z- sectionusing clear glass panel 6 mm ( Six millimetre)thick for doors, windows and clearestory windows including metal beadingof approved quality and shape section with necessary steel screws inluding applying a priming coat of red lead paint complete as per approved specification / design including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
63Providingand fixing glass pane shutter using clear glass panel 5 mm ( Five millimetre) thick for doors, windows and clearestory windows with necessary steel screws complete as per approved specification / design including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
646mm (Six millimetre) thick cement plaster to ceiling in cement mortar 1:3 ( One cement :threesand) upto all floor levelincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
656 mm(Six millimetre) thick cement plaster cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams upto all floor levelincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
6615mm (Fifteen millimetres) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or roundedangles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar1:6 (One cement : sixcoarse sand) upto all floor level in all heightsand curing completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
6715mm (fifteen) millimetres Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty)millimtresin girth and finished even and smooth cement mortar1:3(One cement :threesand) upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
6815mm (Fifteen millimetres) cement plaster in single coat on rough side of brick/ concrete/ stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or roundedangles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar1:6 (One cement : sixcoarse sand) upto all floor level in all heightsand curing completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
69Finishing with Deluxe Multi Surface Paint system for interior or exteriors using primer as per manufacturers of ICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar. make Painting Steel work with Deluxe Multi Surface Paint to give an even shade two or more coat applied @ 0.90 ltr/ 10 sqm (zero point nine zero litres per ten square metres) over an under coat of primer applied @ 0.80 ltr/ 10 sqm(zero point eight zero litres per ten square metres) of approved brand and manufacture including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as perdirection of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
70Providing and Applying painting oneor more coats of oil type wood preservativeofICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar. makeon new wood surgace after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
71Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm(zero pointnine liters per ten square metre) over an under coat of primer applied @0.75 ltr/10 sqm(zero point seven five liters per ten square metre) of approved brand and manufacture of ICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar. make including cleaning of all dirt, dust and other foreign mattersand papering and stopping complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
72Finishing walls with Two or more coat applied @ 3.84 Kg/10 sqm (threepoint eight four kilogrameper ten square metre)of requiredshadepreparation of surface, etc. completeon undecorated wall surface (two coats) to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt dust and other foreign matter etcetera including sandpapered smooth completeupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
73Finishing withTwo or more coats applied on walls @ 1.25 ltr/10 sqm ( one desimal two five litres per ten square metres) over and including one coat of Special primer applied @ 0.75 ltr /10 sqm (zerodesimal seven five litres per ten square metres) premium acrylic washable emulsion paint of approved shade of asian paint / Nerolac paint Dulux paint system for interiors and exteriors using Primer as per manufacturers of ICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar make including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
74Distempering with Synthetic/Acrylicdistemper of asian paint / Nerolac of approved brand and manufacture to give an even shade. New work (two or more coats) over and including water thinnable priming coat with cement primer including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
75White washing with lime on undecorated wall surfacestwo coats to give and even shade including thoroughly brooming the surface to remove all dirt, dust mortar dirt and other foreign matter completeupto all floor level in all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals .The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. ..
76Providing and applying white cement based putty of average thickness 1 mm (one) millimetres of approved brand and manufacturer JK wall putty/ Birla white Putty make over the plastered wall surface to prepare the surface even and smooth complete upto all floor levelincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
77Providing and fixing 1st quality GRC/Unistone wall cladding conforming to IS:15622of approved make in all colours shades except burgundy, bottle green black of any size as approved by Engineer-in-charge. In skirting, risers of steps and dados over 12mm (twelve) millimetres thick bed of cement mortar 1:3 (one cement : three sand)and jointing with grey cement slurry @ 3.3 kg per sqm (Three desimal three Kilogramme per Square metres) including pointing in white cement mixed with pigment of matching shade complete upto all floor level including entirecarriage of materials with in all leads and lifts and technical as per specficationupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
78GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 600x600 mm (six hundred into six hundred )millimetresand 0.5 mm (Zero point five)millimetresthick with 8 mm (Eight) millimetres drop; made of Kajaria, Nitco,Somany,Orient, RAK, Jonshan & Jonshan G I sheet having galvanizing of 100 gms/sqm (One hundred) gramme per square metres(both sides inclusive) and electro statically polyester powder coated ofthickness 60(Sixty) microns (minimum), including factory painted after bending including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
79Making plinth protection 50mm (fifty millimeter) thick in cement concrete 1:3:6 (one cement : three sand (zone - III): six graded crushed stone aggregate 20mm (twenty millimeter) nominal size) over 75 mm(seventy five millimetres) thick bed of dry brick bllast 40 mm(forty millimetres)nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and derssing and finishing the top smooth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates are inclusive ofroyality,GSTor other taxes imposed by the Government.
80Constructing Coursed rubble hammer dressed "U" shape open surface drain with side wall. 15 X 23 cm (Fifteen into twenty three centimeter )in cement mortar 1:6 ( OneCement : Six approved Sand) and inside plastering with cement mortar 1:3 (OneCement:Three approved Sand) including earth work and laying 10 cm(Ten Centimetre ) cement concrete in 1:5:10 (OneCement : Fiveapproved Sand : Tengradedcrushed stone aggregate) of 40 mm (Forty millimetres)nominal size and7.5 cm (seven Point Five centimetre )cement concrete 1:2:4 (OneCement : Twoapproved Sand : Fourgradedcrushed stone aggregate of 20 mm (Twenty millimetre) nominal size) and finished with afloating coat of neat cementcomplete as per standard designupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
81Providing and fixing 80mm (Eighty millimetre) heavy duty precast cement concrete interlocking paver blocks manufactured by the help of Hydro vibratory machine having compressive strength of M-30 (M-thirty) grade as per IS-15658-2006.of N.T.C. ( National Tile Corporation) GICO ,NITCO make including border or curve block grey or coloured.The paver shall be laid on 30mm (Thirty millimetre) sand fillingcompleteupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
82Providing and fixing Solar heating panel(BOSCH) ISI make completeincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
83Providing and fixing 15(fifteen) millimetres nominal bore to external work and floor galvanised mild steel tubes ( heavy grade) made of B.S.T., Jindal (Hissar), Tata Steel Tubes Ltd., Prakash Surya tube fitting and clamps including making good the walls, ceiling and floorincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
84Providing and laying in trenchesgalvanised mild steel tubes 20 mm (Twenty milimeter)JINDAL(HISAR)/ TATA STEEL TUBE LTD( heavy grade )tube fittings (earth work in trenches to be measured and paid separataly)including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
85Providing and fixing 15 mm (fifteen millimetre)JINDAL(HISAR)/ TATA STEEL TUBE LTD( heavy grade ) dia nominal bore G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt
86Making connection of galvanised steel distribution branch with galvanised mild steel mian 25to 40 (Twentyfive to forty )millimetresby providing and fixing tee including cutting as threadingthe pipes completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
87Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00(one ) metre spacing. This includes testing of joints complete as per direction of the Engineer-incharge.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt
881216(16 mm O.D. pipe)(One thousand two hundred sixteen( Sixteen millimetres outer dia pipe))
89Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for coldwater supply,capable to withstand temperature up to 80°C (eighty) degree centigrate , including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as per direction of the engineer in charge .including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment..
90External work 1216(16 mm O.D. pipe)(One thousand two hundred sixteen( Sixteen millimetres outer dia pipe))
91Providing and fixing :White Vitreous china Orissa pattern W.C. pan of size 580x440 mm (five hundered eighty into four hundred forty)millimetreswith integral typefoot rests water closet squatting pan of Hindware or its Equivalent(Indian type W.C. pan ) with 100 mm (One hundred)millimetrs sand cast Iron P or S trap, 10 (Ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the wall and floors wherever required .including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment..
92Providing and fixing white vitreous china flat back large no 5001or wall corner type lipped front urinal basin of 430x260x350 mm (four hundred thirty into two hundredsixty into three hundred fifty millimetres and 340x410x265 mm (Threehundred forty into four hundredteninto two hundred sixty five)millimetres sizes respectively with automatic flushing cistern in whiteshade of Jaquar/ Hindware /Cera with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :one urinal basin with 5(five) litre white P.V.C.automatic flushing cistern .including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment..
93Providing and fixing Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm (fifteen) millimetresC.P. brass pillar tapwash basin inwith C.I. brackets, 15 mm (fifteen) millimetres C.P. brass pillar taps, 32 mm (Thirty two) millimetresC.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require .including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment..
94Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment..
95Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pancompleteincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt
96Providing and fixing viterous China wash basin (510x400 mm ) (five hundred teninto four hundred millimetre)CATNo. S 2040101 In White Shade of superime qualityParryware, Hindware Sanitaryware, Neycer, Ceraincluding cutting holes & making good the same and carriage of materials within all leads and lifts complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
97Providing and fixing Stainless Steel A ISI 304 (18/8) (eighten/eight) kitchen sinksize 510 x1040 mm (five hundred ten into one thousand forty) millimetresbowl depth 250 mm ( Two hundred fifty ) millimetres ofAMC, UNIK, DIAMOND, Neelkanth. make as per IS:13983 with C.I. brackets and stainless steel plug 40 mm (forty millimetres) including painting of fittings and brackets, cutting and making good the walls wherever requiredupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
98Providing and fixing 32 mm (thirty twomilimetre) dia P.V.C. waste pipeFinolax make for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment..
99Providing and Fixing Soap dish stainless steel CAN -1531of Jaquar complete in all respectupto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
100Providing and fixing toilet paper holder JAQUAR,ESS-ESSmake C.P. brassincluding the carriage of material within all leads, liftsthrough all modes of transportation as perdirection of the Engineer-in-charge and other incidentals.The rate is includes of octroi, royality, Malkana, toll tax , GST, sale tax or other taxes imposed by the Government.
101Providing and fixing 600x450mm (six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass make of Atul Modi Guard, Golden fish mounted on 6mm (six millimetre) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washerincluding the carriage of material within all leads, liftsthrough all modes of transportation upto all floor level as perdirection of the Engineer-in-charge and other incidentals.The rate is includes of octroi, royality, Malkana, toll tax , sale tax GSTor other taxes imposed by the Government.
102Providing and fixing PTMT towel rail complete with CP brass brackets fixed to wooden plugs with CP brass screws 600 mm ( six hundred) millimetre long towel rail width 78 mm ( seventy eight millimetre) and effective heightof88mm ( eighty eight millimetre) weight not less than190 gms (one hundred ninety grams)of Kingstone, Gem, Parko, Techno, Jal, ESS, Seiko, Modi ,JAQUAR makeincluding entire carriage of material with in all leads and lifts and the direction of Engineer-in-Charge including other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
103Providing and fixing100 mm(one hundred)millimetres cromium plated grating JAL, ESS-ESS of superior quality for floor, gully or nahani trap completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt
104Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt
105Providing and fixing CP brass bib tap15mm (Fifteen millimetres) dia ( Superior heavy type ) of madeJAL, ESS ESS, Kingstone, Gem, Parko, Techno, Seiko, jaguarincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
106Providing and fixingC.P. brass bib cockof 15mm (Fifteen millimetres) dia ( Superior heavy type ) of madeJAL, ESS ESS, Kingstone, Gem, Parko, Techno, Seiko, jaguarincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
107Providing and fixing brass stop cock of 15mm (Fifteen millimetres) dia ( Superior heavy type ) of madeJAL, ESS ESS, Kingstone, Gem, Parko, Techno, Seiko, jaguarincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
108Providing and fixing plasticised PVC connection pipe Finolex make with brass unions 450mm ( four hundred fiftymillimetre) length 15mm (fifteen millimetre)nominal size upto all floor level. including carriage of material up to all leads and lifts and as per direction of Engineer in charge.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
109Providing and fixing ball valve (brass) JAL, ESS-ESS of approved quality, High or low pressure, with plastic floats complete completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt
11015 mm(fifteen millimetre)nominal bore
11120 mm(twenty millimetre)nominal bore
112Providing and fixing C.P. brass angle valve for basin mixer and geyser points JAQUAR, JAL-ESS or equivalent of approved quality conforming to IS:8931 completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt
113Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite Brass full way valve with C.I. wheel of approved quality (screwed end) :25 mm(twenty five) millimetre nominal dia completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt
114Providing and fixing PVC water storage tank of Sintex three ayer make (I.S.I. 12701 marked tripplelayer)G.I. inlet or out let connection15mm (Fifteen) millimetres nominal bore ball valve and mosquito proof PVC cover with locking arrangement including providing pads of required size of inlet or outlet, compete in all respect including hoisting upto all floor level above ground levelincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
1151000 (one thousand )litres net capacity tank
116Providing and fixing 110 mm x 75 mm (one hundred ten milimeters into seventy five millimeters) PVC Finolex make floor trap working pressure 6.00 Kg per square centimetre (six kilogram per square centemtre) I.S.I. markedof self cleaning design including fixing withapproved adhesive includingcost of cutting and making goods the walls and floors etc. completeupto all floor levelincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
117Providing, laying and jointing 110 mm (one hundred ten millimetre)diameter glazed stoneware pipes class SP-1(one) with stiff mixture of cement mortar in the proportion of 1:1 (one cement : one fine sand) including testing of joints etc. completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt
118Providing and laying 100 mm (one hundred millimetre) diameter S.W. pipe all round cement concrete 1:5:10 (one cement : five coarse sand : ten graded stone aggregate 40 mm (forty)miliimetresnominal sizeincluding bed concrete as per standard design completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
119Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes FINOLEX / SUPREME ISI marked including fixing with approved adhesive etc. complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt
120110 mm (one hundred ten millimetre) diametre
121150 mm (one hundred fifty millimetre)diametre
122Providing and fixing PVC door bend with ovalaccess door, insertion rubber washer 3 mm (Three) millimetres thick bolts and nuts ISI marked complete including fixing with approved adhesive etc.completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt
123110 mm (one hundred ten millimetre) diametre
124150 mm (one hundred fifty millimetre)diametre
125Providing and fixing PVC single equal branch with oval access door, ISI marked of Finolex make insertion rubber washer 3 mm (three millimeyres) thick bolts and nuts complete including fixing with approved adhesive etc. Complete including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
126I) 110mm (one hundred ten millimetre) dia
127II) 150mm (one hundred fifty millimetre) dia
128Providing and fixing PVC double equal branch with oval access door, ISI marked of Finolex make insertion rubber washer 3 mm (three millimeyres) thick bolts and nuts complete including fixing with approved adhesive etc. Complete including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
129I) 110mm (one hundred ten millimetre) dia
130II) 150mm (one hundred fifty millimetre) dia
131Providing and fixing PVC Collars ISI marked of Finolex make including fixing with approved adhesive etc.completeincluding entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
132I) 110mm (one hundred ten millimetre) dia
133II) 150mm (one hundred fifty millimetre) dia
134Providing and fixing PVC plain bend ISI marked of Finolex makeincluding fixing with approved adhesive etc. complete.including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
135I) 110mm (one hundred ten millimetre) dia
136II) 150mm (one hundred fifty millimetre) dia
137Providing and fixing high pressurePVC spigot and socket, waste and vantilating pipe made of Supreme, AKG, Finolex, Prince, Kisan, SFMC,Diplast. working pressure not less than 4.5(four point five)kilogram per square centimeter including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
138110 mm (one hundred ten millimetre)
139150 mm (one hundred fifty millimetre)
140Providing and fixing U shaped wall mounted rail with hings 600x 100 mm ( Six hundred intoone hundred millimetre )Cat No. B2210107 and wall mounted grab bar 600 mm ( six hundred millimetre) long CAT No. B2210106 jaguar or equivalent superior quality complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads liftsand technical specifications as per the direction by the Engineer-in-Charge and other incidentals.The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by theGovernment.
141Providing and fixingExhaust fan ISI marked including fixing withapproved adhesive etc. completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt
142Providing and fixing square-mouth S.W. gully trap class SP-1(one) complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm (three hundred into three hundred millimetre) size (inside) the weight of cover to be not less than 4.50 kg (four point five zero kilograme) and frame to be not less than 2.70 kg (two point seven zero kilograme) as per standard design:100x100 mm (one hundred into one hundred millimetre) size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5(seven point five) completeincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt
143Supplying fixing C.I. cover withoutframefor manhole required shape and approved quality rectangular shape455x610 mm (four hundred fifty five into six hundred ten milimetes)light duty the weight not less than 23Kg ( twenty three kilograme) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
144Constructing With common burnt clay F.P.S.(nonmodular) bricks of class designation 7.5 (seven desimal five) masonry Chamber 60x60x75 cm (Sixty into sixty into seventy five) centimetresinside, in brick work in cement mortar 1:4 (one cement : four coarse sand) for sluice valve, with C.I. surface box 100mm (one hundred)millimetrestop diameter, 160 mm(one hundred sixty)millimetres bottom diameter and 180mm (one hundred eighty)millimetres deep ( inside) with chained lid and RCC top slab 1:2:4 mix (one cement : two coarse sand : fourgraded stone aggregate 20mm(twenty)millimetres nominal size, i/c necessary excavation, foundation concrete 1:5:10 (one cement : five sand : ten graded stone aggregate 40 mm(forty)millimetres nominal size and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12 mm (twelve) millimetres thick, finished with a floating coat of neat cement complete as per standard design :including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
145Constructing manhole with RCC top slab in 1:2:4 mix (One cement : twosand : four graded/crushed stone aggregate ) 20mm (Twenty millimeters) nominal size foundation concrete 1:4:8 ( One cement : foursand : eight graded/crushed stone aggregate 40mm (Forty millimeters) nominal size)inside plastering 15(Fifteen) millimeters thick with cement mortar 1:3 (One cement : threesand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( One cement : twosand : four graded/crushed stone aggregate 20mm (Twenty millimeters nominal size) finished smooth complete in all respect including curing and testing Inside size 800mmx800mm and 500mm (Eight hundred into Eight hundred into five hundred milimeters) deep including C.I. cover with frame (Light duty single seal : Pattern) -I 455mmx 610mm (Four hundred fifty five into six hundred ten millimeters) internal dimensions total weight of cover and frameto be not less than 38kg (Thirty eight kilogramme) weight of cover 23kg (Twenty three kilogramme) and weight of frame 15 kg (Fifteen kilogramme) with 200mm (Two hundred millimeters) thick walls of brick masonry using commonburnt clay building bricks in cement mortar1:3 ( One cement : threesand) including entire carriage of material with in all leadsand lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
146Constructing brick masonry chamber size inside dimensions 455 x 610 and 450 mm (four hundred fifty five into six hundred ten andfour hundred fifty) millimetres deep single pipe line.for under ground C.I. Inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (one cement : five sand ) C.I. Cover with frame (lightduty ) 355 x 610( three hundred fifty five into six hunderd ten) millimetresinternal diamensions total weight of cover with frame to be not less than 38 (thirty eight ) Kilogramme (weight of cover 23 (twenty three) Kilogrammeand weight of frame 15 ( Fifteen)kilogrammeR..C.C top slabe with 1:2:4 mix (onecement : two sand : fourgraded crushed stone aggregate 20 (twenty) millimetres nominal size ) foundation concrete 1:5:10 ( one cement : fivesand : tengraded crushed stone aggregate 40( Forty millimetresnominal size) inside plaster 15mm (Fifteen) millimetresthick with cement mortar 1:3 (one cement : threesand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates areinclusive ofoctroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail