Repairs To Electro-Mechanical Machinery With Allied Works At Lis Nazlachak- 1 Repairs To06cusec Discharge 36M Headhorizontal Centrifugal Pump No . 01 Installed At Lis Nazlachak.The Job Involves De-Coupling Of Pump From The Motor And Removing Top Cover Of, akhnoor-Jammu And Kashmir

Repairs To Electro-Mechanical Machinery With Allied Works At Lis Nazlachak- 1 Repairs To06cusec Discharge 36M Headhorizontal Centrifugal Pump No . 01 Installed At Lis Nazlachak.The Job Involves De-Coupling Of Pump From The Motor And Removing Top Cover Of The Hc Pump, Extracting The Internal Impeller Assembly Together With Bearing Brackets And Shifting The Same To Workshop By Using Mechanical Transport. Complete Dismantling Of The Impeller Assembly In The Workshop. . Repairs To Impellerby Applying New Material So The Impeller Should Be Balanced. Turning And Machining Of The Impeller For Proper Finish And Size.P / F Of 2-Nobushes & 2-No Bearings ( 6309 ) . Providing / Fabrication Of Neck Rings ( 2 Nos. ) . Fabrication Of Glands As Per Sample. Greasing Of All The Parts . Re-Assembling Of Impeller Shaft Assembly & Shifting Back To L.I.S. Fitment Of Impellershaft Assembly In The Pump At Proper Position & Closing The Top Cover By P / F Of New Nuts, Bolts, Washers And Packing. Providing / Fitting Of Gland Packing, Greasing Work . Thereafter Coupling With Motor, Alignment Setting, Testing Of Pump On Load. Complete Job Includes The Cost Of Material, Labour Charges, To And Fro Carriage Charges, Hire Charges Of Tools And Tackles, Out Station Charges Etc.Complete Job 2 Repairs To 2 Hp Priming Pump Installed At Lis Nazlachak .The Job Involves Disconnecting The Power Supply And Unfastening The Priming Pump From The Suction Side And Delivery Side . Thereafter Shifting The Priming Pumping Unitto Workshop Through Mechanical Transport . The Job Involves Complete Dismantling Internal Parts Of The Pump. Complete Rewinding Of 2 Hp Motor Of Priming Pump.. Providing And Fitting Of New Bearings ( 6205-2 Nos. ) . The Job Includes Fabrication Of Impeller As Per Sample. Assembling Of Priming Pump With Greasing Of Bearings And Shifting Of The Priming Pump To The Site Of Lis. Replacement Of Damaged / Worn Out Suction Pipe ( 2 Inches Dia ) By Way Ofproviding / Fitting Of New Pipe Of3mtr Length. Providing And Fitting Of New Foot Valve ( 2 Inches Dia ) .Providing / Fitting Of ( 2 Inches Dia ) Ball Valves ( 2Nos. ) . Fitment Of The Priming Pump At The Proper Position And Fastening The Suction And Delivery Pipes To The Priming Pump.Testing Of Priming Pump On Full Load. The Job Includes Cost Of Material, Labour ( Skilled And Unskilled ) , Transportation Charges, Hire Charge Of Tool And Tackles . 3 Repairs To Foot Valve ( 250 Mm Dia ) Of Pumping Unit No.1 Installed At Lis Nazlachak. The Job Involves Disconnecting / Dismantling Of The Foot Valve Assembly From The Suction Pipe By Deploying Manual Labour And Allied Tools & Tackles. Shifting / Transporting To The Workshop. Cleaning By Washing With Water To Make The Foot Valves Completely Silt Free. After Drying Them Completely, Carrying Out Necessary Repair Works On The Valve Surfaces And Flanged Joints By Welding Using Good Quality Electrodes. Complete Repair To The Damaged Flap Seat, Flaps And Hinges . Providing / Fitting Of New Rubber Washer Cut As Per Size Of The Flap Plate. Reassembling The Foot Valve And Transporting Back To The Installation Site At Lis. Fitting The Valves To The Respective Suction Lines With Replacement Of Damaged Rubber Gaskets Of Flanged Joints And Worn-Out Nuts, Bolts Etc. Complete Job Including Cost Of Material, Labour Charges, Transportation Charges And Hire Charges For Tools & Tackles. Complete Job

INR 200 /-

INR 75000.0 /-