|
| 1 | Excavation for foundation in earth, soil of all types, sand, graveland soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stackingand spreading as directed, dewatering, preparing the bed forthe foundation and necessary back filling, ramming, wateringincluding shoring and strutting etc. complete. (Lift upto 1.5 m.) |
| 2 | Excavation for foundation in Hard murum including removingthe excavated material upto a distance of 50 metres beyondthe building area and stacking and spreading as directed,dewatering, preparing the bed for the foundation andnecessary back filling, ramming, watering including shoring andstrutting etc. complete. (Lift from 1.5 to 3.0m.) |
| 3 | Providing soling using 80 mm size trap metal in 15 cm. layerincluding filling voids with Crushed sand/grit, ramming, wateringetc. complete. |
| 4 | Providing and laying Cast in situ/Ready Mix cement concrete inM-10 of trap/ granite/ quartzite/ gneiss metal for foundation andbedding including bailing out water, formwork, laying/pumping,compacting, roughening them if special finish is to be provided,finishing if required and curing complete, with fully automaticmicro processor based PLC with SCADA enabled reversibleDrum Type mixer/concrete Batch mix plant (Pan mixer) etc.complete. With natural sand/V.S.I. quality Artificial Sand |
| 5 | Providing and laying in situ/Ready Mix cement concrete M-20of trap / granite /quartzite/ gneiss metal for R.C.C. work infoundations like raft, strip foundations, grillage and footings ofR.C.C. columns and steel stanchions etc. including bailing outwater, formwork, laying/pumping cover blocks, compactionand curing roughening the surface if special finish is to beprovided (Excluding reinforcement and structural steel) etc.complete, with fully automatic micro processor based PLC withSCADA enabled reversible Drum Type mixer/ concrete Batchmix plant (Pan mixer) etc. complete. With natural sand/V.S.I.quality Artificial Sand |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columnsas per detailed designs and drawing or as directed includingcentering, formwork, cover blocks, laying/pumping,compaction finishing the formed surfaces with cement mortar1:3 of sufficient minimum thickness to give a smooth and evensurface or roughening if special finish is to be provided andcuring etc. complete,(Excluding reinforcement and structuralsteel).with fully automatic micro processor based PLC withSCADA enabled reversible Drum Type mixer/ concrete Batchmix plant (Pan mixer) etc. complete. With natural sand/V.S.I.quality Artificial Sand |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beamsand lintels as per detailed designs and drawings or as directedincluding centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to beprovided and curing etc. complete. (Excluding reinforcementand structural steel). with fully automatic micro processor basedPLC with SCADA enabled reversible Drum Type mixer/ concreteBatch mix plant (Pan mixer) etc. complete. With naturalsand/V.S.I. quality Artificial Sand |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja asper detailed design and drawings including centering,formwork, cover blocks compacting , curing , finishing androughening the surface if special finish is to be provided andcuring complete. (Excluding reinforcement and structuralsteel).with fully automatic micro processor based PLC withSCADA enabled reversible Drum Type mixer/ concrete Batchmix plant (Pan mixer) etc. complete. With natural sand/V.S.I.quality Artificial Sand |
| 9 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs andlandings as per detailed designs and drawings includingcentering, formwork, cover blocks, laying/pumping,compactionfinishing the formed surfaces with cement mortar1:3 of sufficient minimum thickness to give a smooth and evensurface or roughening if special finish is to be provided andcuring etc. complete,(Excluding reinforcement and structuralsteel).with fully automatic micro processor based PLC withSCADA enabled reversible Drum Type mixer/ concrete Batchmix plant (Pan mixer) etc. complete. With natural sand/V.S.I.quality Artificial Sand |
| 10 | Providing and fixing in position TMT - FE - 500 bar reinforcementof various diameters for R.C.C. pile caps, footings, foundations,slabs, beams columns, canopies, staircase, newels, chajjas,lintels pardis, copings, fins, arches etc. as per detailed designs,drawings and schedules. including cutting, bending, hookingthe bars, binding with wires or tack welding and supporting asrequired complete. |
| 11 | Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in foundations and plinth ofinner walls/ in plinth external walls including bailing out watermanually , striking joints on unexposed faces, raking out jointson exposed faces and watering etc. Complete. |
| 12 | Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure includingstriking joints, raking out joints, watering and scaffolding etc.Complete |
| 13 | Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:4 in half brick thick wallincluding mild steel longitudinal reinforcement of 2 bars of 6 mmdiameter / 2 hoop iron strips 25 mm X 1.6 mm placed at everythird course, properly bent and bonded at ends scaffolding,racking out joints and watering etc. complete |
| 14 | Filling in plinth and floors with approved excavated material in15cm. to 20cm. layers including watering and compacting etc.complete. |
| 15 | Filling in plinth and floors with contractors material/broughtfrom outside and approved by Engineer incharge in layers of15 cm to 20 cm including watering and compaction etc.complete. |
| 16 | g and fixing in position. (as per I.S.1868 / 1982)Aluminium sliding window of two tracks with rectangular pipehaving overall dimension ?63.50 x 38.10 x 1.02 mm at weight0.547 kg/Rmt. and window frame bottom track section 61.85 x31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side tracksection 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. Theshutter should be of bearing bottom 40 x 18 x 1.25 mm at weight0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417kg/Rmt. As per detailed drawings and as directed by Engineerin charge with all necessary Aluminium sections fixtures andfastenings such as roller bearing in nylon casting and selflocking catch fitted in vertical section of shutter including 5 mmthick plain glass with all required screws and nuts etc,complete. With powder coating without box |
| 17 | Providing and fixing in position powder coated aluminiumlouvered windows / ventilator of various sizes with powdercoating as per detailed drawing and specifications includingaluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thicksheet glass louvers, of approved quality etc. complete. |
| 18 | Providing and fixing mild steel grill work for windows, ventilators,etc. 15 kg/sqm as per drawing including fixtures necessarywelding and painting with one coat of anticorrosive paint andtwo coats of oil painting complete. |
| 19 | Providing and Fixing 32 mm thick One piece single mouldedpuff ABSTRONE BUTADYNE STYRINE (ABS) Door shutter for internal use including toilets made up of outer ABS sheet of 1.2 mm thick having puff insulation of 35 to 40 Kg/Cum.density and 10 mmdia.for steel bars 2 Nos., wooden block to receive fixtures,having M.S. hinges 100 mm length, M.S. handles 150 mm lengthand 10 mm dia sliding door bolt etc. complete |
| 20 | Providing and fixing solid core flush door shutter in single leaf 32mm thick decorative type of exterior grade as per detaileddrawings approved face veneers 3 mm thick on both faces oras directed, all necessary beads, mouldings and lipping,wrought iron hold fasts, chromium plated fixtures andfastenings, with brass mortise lock, chromium plated handles onboth sides, and finishing with French Polish etc. complete. |
| 21 | Providing and fixing frame with / without ventilator of size asspecified with Country non teak wood for doors and windowsincluding chamfering, rounding, rebating, iron holdfast of size300mm x 40mm x 5mm with oil painting, etc. complete. |
| 22 | Providing internal cement plaster 6 mm thick in a single coat incement mortar 1:4 without neeru finish to concrete surface in allpositions including scaffolding and curing etc. complete. |
| 23 | Providing internal cement plaster 12mm thick in single coat incement mortar 1:4 without neeru finish to concrete or bricksurfaces, in all positions including scaffolding and curing etc.complete. |
| 24 | Providing internal cement plaster 20mm thick in two coats incement mortar 1:4 without neeru finish, to concrete, bricksurface, in all positions including scaffolding and curingetc.complete. |
| 25 | Providing and laying ceramic tiles of having size 30 cm x 30cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mmthick for flooring in required position laid on a bed of 1:4cement mortar including cement float, filling joint withwhite/colour cement slurry cleaning curing etc. complete. |
| 26 | Providing and laying vitrified mirror / glossy finish tilesdecorative type having size 590 mm to 605 mm x 590 mm to605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern forflooring in required position laid on a bed of 1:4 cement mortarincluding neat cement float, filling joints, curing and clearingetc. complete. a) Flooring |
| 27 | Providing and laying vitrified mirror / glossy finish tiles havingsize 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mmthickness and confirming to IS. 15622-2006 ( group Bla) ofapproved make, shade and pattern for flooring in requiredposition laid on a bed of 1:4 cement mortar including neatcement float, filling joints, curing and clearing etc. complete.b)Skirting |
| 28 | Providing and applying white-wash in two coats on old / newplastered or masonry surfaces and asbestos cement sheetsincluding scaffolding and preparing the surface by brushingand brooming down etc. complete. |
| 29 | Providing and applying plastic emulsion paint of approvedquality, colour and shade to old and new surfaces in two coatsincluding scaffolding, preparing the surface. (excluding theprimer coat)etc. complete. |
| 30 | Providing and applying two coats of textured synthetic paint ofapproved shade and quality and one coat of primer beforeapplying textured paint including scaffolding if necessarypreparing surface by thoroughly cleaning oil, grease, dirt andother materials as required, etc. complete. |
| 31 | Providing and fixing Orissa type white glazed earthenware 575mm water closet pan including S trap with earthenware footrests, cast iron soil and vent pipe upto outside face of the wall1:2:4 brick bat lime concrete bedding without flushing tank andits accessories etc. complete. |
| 32 | Providing and fixing white glazed earthenware Wash Hand Basinof 55cm. x 40 cm. size including cold water pillar tap/cold andhot water pillar tap brackets, rubber plugs and brass chain, stoptap and necessary pipe connections including P.V.C. wastepipe and trap up to the outside face of the wall. Making goodthe damaged surface, testing etc. complete. |
| 33 | Providing and fixing 10cm C.I. Nahani Trap including C.I. gratingbend and piece of C.I. pipe upto the outside face of the wallcomplete. |
| 34 | Providing and fixing 15 mm dia. screw down bib/ stop tap ofbrass including necessary socket union nut complete. |
| 35 | Providing and fixing H.D.P container Syntex or alike one piecemoulded water tank made out of low density polythyler andbuilt corrugation including of delivery up to destination hoistingand fixing of accessories such as inlet, outlet overflow of alltanks capacity above 1000 to 20,000 litres |
| 36 | Providing soak pit of size 120cm x 120cm x 120cm includingexcavating and filling with brick-bats. |
| 37 | Providing and fixing P.V.C. Rain water pipes of 110mm outerdiameter and having wall thickness of 2.2 to 2.7 mm confirmingto I.S. 13592-1992 including proper rainwater receiving recesswith P.V.C. plug, bend, necessary fittings, such as, offsets, shoes,inluding fixing the pipe on wall using approved wooden cleatsprojecting 25mm to 40mm from face of wall a fixing with clips ofapproved quality and number ,filing the joint using rubbergasket with solvent cement and properly resting the shoe ofpipes on C.C. or masonry blocks, including necessaryscaffolding and maintenance for 3 yrs for any leakages ordislocations of pipes. All the P.V.C. fittings and additional 2piece socket clips shall be got approved from engineer incharge etc. complete. (The contractor shall give 3 yrsguarantee bond for payment) |
| 38 | Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVCpipe with necessary fittings, remaking good the demolishedportion etc. complete. |
| 39 | Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVCpipe with necessary fittings, remaking good the demolishedportion etc. complete. Including removing existing pipe line ifnecessary and conveying and stacking the same in PWDchowky or as directed etc. complete. |
| 40 | Painting letters upto 20 cm height complete brushes, coirbrushers, dusting, cleaning, including cost of paint etc.complete. |
| 41 | Royelty ChargesFor Metal |
| 42 | Royelty ChargesFor Hard murum |
| 43 | Royelty ChargesFor Natural Snad |
| 44 | testing Charges C.C. Cubes |
| 45 | testing Charges Bricks |
| 46 | Gst Charges12% |
| 47 | Insurance 1% |
