|
| 1 | 18.22.-Cold twisted deformed (:ribbed/tor steel) bars for R.C.C. works, where not included in the complete rate of R.C.C including bending, binding and placing in positon complete. |
| 2 | 6.6-Earth work in excavation in foundations, trenches, etc. in all kinds ofsoils, not exceeding 2 metres depth including dressing of bottom andsides of trenches, stacking the excavated soil, clear from the edge ofexcavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres |
| 3 | 10.32.-Cement concrete 1 : 6 : 12 with stone aggregate 40 mm Nominal size in foundation and plinth. |
| 4 | 16.79 (b)-Providing two coats of exterior acrylic emulsion paint :- 1st quality |
| 5 | 13.13-Terracing consisting of tiles 22.86 cm X 11.43 cm X 3.81 cm, laid over 87.50 mm mud filling, on a layer of 25 mm mud plaster and an other layer of mud mortar for laying the tiles over a polythene film of 100 micron (0.1 mm) thickness with 25 mm thick layer of of fine sand, above and below the polythene film, laid on top of R.C.C., slab, including grouting with cement sand mortar 1:3 and top surface to be left clean. |
| 6 | 14.89-Providing and fixing vitrified tiles of size 600 x 600mmof approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:-Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT & JOHNSONS |
| 7 | 18.12-Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position. |
| 8 | 16.81-Providing and applying two coats white cement based putty over plastered and grinding the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour, charges, scaffolding, sundries etc. Complete (J.K./Birla make) |
| 9 | 10.82-stone aggregate20 mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centering and shuttering , laid in position, complete in allrespects. |
| 10 | 16.52-Preparation of plastered surfaces for oil bounddistemper including sand papering the surface, applying one coat of linseed oil, and filling with approved quality filler,consisting of white lead, linseed oil, varnish and chalk mittii including finishing Preparation of plastered surfaces for oil bounddistemper including sand papering 2nd quality paint |
| 11 | 14.92 (a)-Providing and Fixing 1st quality ceramic glazed wall tiles confirming to I.S. 15622 (thickness to b specified by the manu-facture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry including pointing in white cement mixed with pigment of matching shades complete:- size of ceramic glazed tiles 200x300mm |
| 12 | 17.18 (a) (i)-paneled glazed, or glazed and panelled : - 40 mm thick (12 mm thick deodarwood panel) |
| 13 | 8.5 (b)-In cement |
| 14 | 15.6.-12 mm thick cement plaster 1:5 |
| 15 | 17.12-Chowkats of commercial hard wood such as hillock, champ, chikrassy, and chaplash, etc., (Non-coniferous timber other than teak conforming to I.S. specification no. 1003 kiln seasoned), of doors and windows including iron hold fasts, corner straps, screws, bolts for hold fasts, etc., complete fixed in positon. |
| 16 | 8.6 (d)-cement concrete plain 1:2:4 mi |
| 17 | 7.20.1-Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in :-Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 18 | Analysis for Loading, Unloading & Carriage of material/sand/brick blast/malba |
