|
| 1 | PART \"A\" CIVIL WORKS |
| 2 | Surfacedressing of the ground including removing vegetation and inequalities not exceeding 15 cm deepand disposal of rubbish lead up to 50 mtr and lift up to 1.5 mtr All kinds of soil |
| 3 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in lead of 50 mtr. All kinds of soil. |
| 4 | Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc. in layers not exceeding 20 cm in depth consolidation each deposited layer by ramming and watering including lead up to 50 mtr and with all lift. |
| 5 | Filling in plinth with locally available river shingle under floors including watering ramming consolidating and dressing complete including cost of river shingles. |
| 6 | Providing and laying in position cement concrete including curing compaction etc . Completein specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 7 | Random rubble stone masonary for foundation and plinth in cement sand mortar above 30 cm thick wall in: Cement mortar 1:6( 1 Cement : 6 Sand ) |
| 8 | Centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formworks for foundation in basement rafts, footings, straps beams, bases of columns etc. up to plinth level. |
| 9 | Providing and laying in position specified grade of reinforcement cement concrete all RCC structural elements upto plinth levelincluding curing compaction finishing with rendering in cement sand mortar 1:3 ( 1 cement : 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcementM20 Grade nominal mix (with graded stone aggregate 20mm nominal size) |
| 10 | Centering & shuttering with ply wood or steel sheets including strutting , propping, barcing both ways with wooden members and removal of form work up to floor three level for: Suspended floors, roofs, landings staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blockes sills, chhajjas, lintel, beams etc. |
| 11 | Providing and layiny in position specified grade of cement concrete for RCC Structure elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement ; 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15° , landings,balconies , shelves ,chajjas, lintels, bands ,plain window, sills ,staircases and spiral staircasesM 20 grade nominal mix (with graded stone aggregate 20mm nominal size) |
| 12 | Providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position in binding (including cost of binding wire ) all complete up to floor three level.Thermo mechanically treated bars (conforming to relevant IS:1786.) |
| 13 | Random Rubble stone masonry for superstructure above plinth level one storey height above 30 cm. thick walls in : Cement mortar 1:6 ( 1 Cement : 6 Sand ) |
| 14 | Half brick masonry in superstructure up to third storey including cost of nominal hoopreinforcement ( 2 Nos. 6 mm dia M.S. bar at every forth course ) using bricks of designation 75Cement mortar 1:4 ( 1 cement : 4 coarse sand ) |
| 15 | Providing and fixing Ist quality standard White/ ivory,grey, fuma red brown, light green, light blue and other light shades Glazed Tiles of (confirming to IS : 13753 & IS 13622) of size 300 mm x 200 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls & pillars ). |
| 16 | Providing and fixing Ist quality MAT finished ceremic tiles size 300 x 300 mm confirming to IS: 13755 & IS: 15622 colour such as white, grey, Ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4). |
| 17 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade,laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. Size 600 mm x 600 mm |
| 18 | Polished Blue Kota stone slab in steps, walls, pillars, having fine machine cut edges laid on 12mm (Av.) thick cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete 25 mm thick slab area 2001 to 5000 sq.cm |
| 19 | Supplying and fixing in walls machine cut and polished stone shelves tands and sills in CM 1:3 with machine cut edges Kota stone 25 mm thick |
| 20 | Providing & laying chequerred plain cement concrete embossed to specially manufactured non-slipping tiles of approved make 20mm thick laid on 20mm thick bed of cement mortar 1:6 jointed with neat cement slurry complete. Add extra for chequerred coloured plain cement concrete or specially manufacturing non-slipping 9-12 mm ironite topping tiles of approved make 20mm thick |
| 21 | Providing and fixing Granite stone slab thickness 16 - 18 mm mirror polished and machine cut in walls, pillars, steps, shelves, counter, floors etc. laid on 12 mm (Av.) thick base of cement mortar 1:3(1 cement : 3 coarse sand) jointing with white cement mortar 1:2 ( 1 White cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of. Green/Black/Other granite |
| 22 | Upto 800 cm2 tiles |
| 23 | Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanit counters and similar location in marble/stone work including necessary holes for pillars taps etc. including rubbing and polishing of cut edge etc. complete. |
| 24 | Extra for providing edge moulding to 16 - 18 mm thick marble stonecounters . vantities etc. Over item No. 7.1 & 7.2 including machines polishing to edge to give high gloss finish etc. Complete as per design approved by Engineer - in- charge. Granite Work |
| 25 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finishing with cement mortar 1:3 as per standard design. |
| 26 | Grading for roof water proofing treatment with : Cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) with water proofing compound as per manufacturs\"s specification |
| 27 | Providing & laying broken glazed titles on 20mm thick in plain cement Mortar 1:4 (broken glazed tiles not less than 9 Kg/Sqm) and joints filled with white cement with water proofing compund all complete as per direction of Engineer-in-charge. Grading/ 0.075 |
| 28 | Providing and fixing precast cement concrete coping 1:2:4 mix 50 mm thick complete as per specification: |
| 29 | Providing and fixing pressed steel mitred doors frames manufactured from commercial mild steel sheet of 1.25 mm ( 16 gauge) thickness including hings jamb, lock jamb, head and if required angles threshold of mild steel angles of section 50x25mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split and tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge. |
| 30 | Double Pitam Door Frame Profile D : 125 x 60 |
| 31 | Single Pitam Door Frame Profile A : 90 x 60 |
| 32 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure\"A\" 35 mm thick Commercial Veneer both side |
| 33 | Add extra in flush doors :For double leaf |
| 34 | Providing and fixing fully panelled single leaf shutter for doors asper approved design and drawing with approval ordinary C.P./ oxidised steel fittings as per Annexure \"A\" and width of styles& top rails of 100 mm and lock rails width of 150 mm and bottomrails of 200 mm width including teak wood beading of size 19 mm x12 mm on both faces complete. 30mm thick wood Nigeria teak gr-1 Wire gauge 24 gauge 14 mesh of IS designation 85 gauge wires of dia 0.58 mm panels |
| 35 | For external teak wood lipping on flush door 35 mm x 6 mm |
| 36 | Providing and fixing in position collapsible steel shutters with vertical M.S. , Channels 20x10x2mm and bracket with flat iron diagonals 20x5mm, size with top and bottom rail of T-iron 40x40x6mm . with top flat of 50 x 10 mm and bottom flat of 40 x 6 with 40mm dia steel pulleys/ ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer ( To be measured and paid as per outer dimension). With 100 mm opening when closed. |
| 37 | Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm, long embedded in cement concrete block 15x10x10cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with coper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer excluding the cost of metal beading and other fitting except necessary hings of pivots steel handles peg stay etc. as required. Windows side hung (openable) |
| 38 | Providing and fixing square bars or other flat welded to window ventilatiors etc. |
| 39 | Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish: 20mm thick |
| 40 | Making grooves as per design in plaster 10mm to 20mm wide |
| 41 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work including prepration of base with primer putty lippy complete in allrespect. |
| 42 | Applying Birla /JK white cement based putty over cement plaster surface for making even surface |
| 43 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). |
| 44 | Applying priming coat: With ready mix pink or grey primer of approved brand and manufacture on wood work hard and soft wood |
| 45 | Painting with enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 46 | Providing and fixing anodized aluminium work (Anodizing to be got done from approved Anodizer) for doors, windows ventilators and partition with extruded built up standard tubular and other sections of approved make conforming to IS : 733 and IS 1285 anodised transparent and dyed to required shadeaccording to IS : 1868. (Minimum anodic coating of grade AC 15), fixed with rowel plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gap at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth rust free straight, mitred and jointed mechaincally wherever required including cleat angle Aluminium snap beading for glazing /panelling , C.P. brass/ stainless steel screws, AI. Tower bolt & AI handle & Al. Aldrop etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separtely).For fixed portions |
| 47 | For shutters of openable doors, windows & ventilators including providing & fixing hinges / rollers etc. and making provisiion for fixing of fittings wherver required (lockes shallbe paid for separately). |
| 48 | Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade) particle board grade I type IInd conforming to IS: 12823 bonded formaldehyde synthetic resin of approved brand and manufacture in paneling fixed in aluminium doors windows shutters and partitions frame with C.P. Brass /stainless-steel screws etc. complete as per Architectural drawing and direction of Engineer in charge. Pre laminated particle board with decorative lamination on both side |
| 49 | Providing and fixing glazing in aluminium door, window, ventilator shutter and partition etc with PVC/Neoprene gasket etc complete as per the Architectural drawings and the direction of Engineer in charge ( cost of aluminium snap beading shall be paid in basic item) With glass panes of 5.0 mm thickness (weight not less then 13.75 kg/sqm) as per IS:2835 |
| 50 | S&F fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Aluminium beading 20x3 mm with suitable screwsat not exceeding 150mm distance at all height with all lead and lift with scaffolding |
| 51 | P & F double action Hydraulic floor spring of approved brand and manufacture to aluminium door shutterincluding cost of cutting floors as required embedding in floors and cover plate etc. complete as per directon of Engineer in charge Confirming to IS:6315 sush as Sandhu/Amar or equivalent make |
| 52 | Providing and fixing brass lock without handle for Aluminium door, of approved quality, make & design as directed by Engineer-in-charge. |
| 53 | Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-charge Anodized (AC 15 ) aluminium |
| 54 | Random rubble dry stone kharanja under floor |
| 55 | P/F stainless steel pipe railing 90 cm. height with 304 grade 50.00 mm dia S.S. pipe (1.20 mm thick) Top pipe and 40.00 mm dia S.S. vertical pipe @1.0 mtr., internal and 3 Nos. 20 mm. dia intermediate runner and 2 Nos. 75 mm. dia ornamental pillar at start and end of the railing complete with required fittings. All stainless steel work shall be brushed steel finish with all joints, Welds properly grinded to final complete work as per direction of Engineer in Charge. For Ent. Ramps and stair and Ramps |
| 56 | Providing and fixing of precast concrete interlocking block of M 30 grade manufactured from fully computerised automatic stationery hydraulic vibropressed machine and fully computerised automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50 mm. thick bed of coarse sand and the joint on is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead, Lifts and taxes General specification of blocks: 1) Shape as defined by Engineer incharge2) Tensile splitting strength and braking load as per BS 6717:2001 3) Color : Grey cement natural colour. 4) Variation in dimension : Less than 1.6 mm. 5) Variation in thickness : Less than 3.2 mm. 6) Abrasion : As per BS : 6717:2001 80mm thick interlocking blocks |
| 57 | PART \"B\"SANITARY WORKS |
| 58 | P & F Indian type white glazed vitreous china Ist quality W.C.orissapan (I.S: 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor. Size 580 x 440 mm |
| 59 | P & F Europeantype white glazed vitreous china Ist quality W.C.pan (I.S: 2556 Mark) withP or S trap including cutting and making good the wall and floor. |
| 60 | P & F water closet Seat Covers with brass hinges complete:Solid PVC (ISI marked) grade-1 White for EWC. |
| 61 | P & F jet spray for water closet with C.P. Copper tube flange of approved make |
| 62 | P & F GI pipes ( Internal works ) with GI fittings excluding Union(IS:1239 mark) and MS clamps, including cutting and making good the wall and floors. Exposed on wall |
| 63 | 15mm dia Nominal Bore \"\"B\" Class |
| 64 | 25mm dia Nominal Bore \"\"B\" Class |
| 65 | P & F GI pipes ( External works ) with GI fittings eccluding Union(IS:1239 mark)and MS clamps, including trenching and refilling earth etc. |
| 66 | 15mm dia Nominal Bore \"\"B\" Class |
| 67 | 25mm dia Nominal Bore \"\"B\" Class |
| 68 | 32mm dia Nominal Bore \"\"B\" Class |
| 69 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: |
| 70 | C.P. Brass bib cock,15mm nominal bore. |
| 71 | C.P. Brass Long body, 15mm nominal bore weight not less than 690 gm |
| 72 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.400 gm,15mm. |
| 73 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked)with 37 cm long pipe nut |
| 74 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : |
| 75 | Gun-metal 15mm nominal bore. |
| 76 | Gun-metal 25mm nominal bore. |
| 77 | P & F WVC wash basin (Ist quality, I.S.: 2556 Mark) of approved make with C.I. brackets duly painted 1 No 15 mm C.P. pillar cock (I.S. : 8934 Mark) & 32 mm C.P. brass wastecoupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.Size 580 x 450 mm |
| 78 | P & F 15 mm. Dia Connection Pipe of approved quality/make : PVC pipe with C.P. Brass nuts upto length, 600mm |
| 79 | P & F PVC Storage Tank (IS : 12701 marked indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1000 litres capacity. |
| 80 | Hoisting charges for each floor |
| 81 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110mm dia |
| 82 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for soil and waste discharge system (IS:13592 : 1992 Marked) of approved quality /make. |
| 83 | Nahni Trap with Jali 4” 100mm dia |
| 84 | Bend 87.5 Dg. 110mm dia |
| 85 | Single Tee 110mm dia |
| 86 | Coupler110mm dia |
| 87 | Vent Cowel 100 mm |
| 88 | Pipe Clip 110mm dia |
| 89 | Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- Size 230x110x150 cms (for 20 users) |
| 90 | Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring, earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.: Size 240 Cm. dia outside & 240 Cm. depth. |
| 91 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. |
| 92 | Inside size 300 X 300 mm depth upto 0.5 M Cement cover with frame. |
| 93 | Inside size 450 x 450mm depth upto 0.5 M Cement cover with frame |
| 94 | Providing Laying & jointing glazed S.W. pipes grade `A` (IS;651 marked) of approved make with spun yarn & stiff mixture of cement mortar 1:1, excavation & refilling of earth in all types of soil upto 1.2m depth, S.W. fittings, including testing of joints etc, complete. 150 mm dia |
| 95 | 150 mm dia |
| 96 | 230 mm dia |
| 97 | Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm nominal size) upto haunches of S.W. pipes including 150 mm thick bed concrete (Width W= Dia of pipe in Cm+ 30Cm.) concrete width to be reduced from width W at center of pipe to `0` at top of pipe. (Excluding cost of pipe) 150mm dia S.W. pipe |
| 98 | 150mm dia S.W. pipe |
| 99 | 230mm dia S.W. pipe |
| 100 | P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make : C P Brass concealed 25mm nominal bore. |
| 101 | P & F Low level Flushing Cistern of 10 litres capacith (IS : 2556 mark), of approve make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS : 1703 mark) complete including cutting and making good the wall:PVC with PVC bend as per IS 7231 |
| 102 | P & F Soap dish or Tray of approved quality/make.C.P. brass heavy & superior quality |
| 103 | P &F Kitchen & Lab. Sink of approved make with C.I. bracketsduly painted 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor. 1.0 mm thick Salem stainless steek AISI- 304 kitchen sink of approved make (Nirali, Neel Kanth, Jaina, Faber-castelll) with large waste coupling.Overall Sizes 22 x18 x 7 inches, Bowl sizes 20 x16 x 7 inches |
| 104 | P & F Stop Cock (IS :8931 Mark), superior quality & of approved make: C.P. Brass 15mm nominal bore. |
| 105 | P & F Towel Rail or Ring of approved quality/ make: C.P. brass towel rail elbow type with concealed screws size 450 mm (Heavy duty) |
| 106 | P & F Beveled edge Mirror of special glass of approved make (Atul Modi Guard Saint Gobin orequivalent) complete with 6 mm thick asbestos cement sheet ground fixed to wooden screw & washers. Size 600 x 450 mm x 4 mm thick |
| 107 | Construction of Open Surface Drain with 112mm thick brick masonry in CM 1:4,110mm thick base concrete 1:5:10, 37mm thick M-15 grade C.C. flooring ,12mm 1:4 cement plaster on all exposed faces of walls including top surface excavation & disposal of earth complete as per approved design/drawing:150m drain,225mmm av. Depth |
| 108 | Construction of Tube-well upto 100 meter depth and above in all type of rocks by DTH system and over burden to accommodate casing pipe of following sizes in all types of soil and over burdens including lowering of casing pipes but excluding cost of casing pipes as per IS: 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have throughout bore as per nominal dia of casing pipe:200 mm dia Nominal bore. |
| 109 | Supply of ERW M.S. block casing pipe ISI marked (IS: 4270/1992) of grade Fe 410 of following sizes at site of work.Nominal bore of pipe (MM) 200 ,Oustside dia 219.00 mm,Thickness of pipe5.4 mm,Mass of plane tube 28.46 Kg./m. |
| 110 | S & F M.S. clamp, set of 50x6 mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. |
| 111 | S & F tube well cover of M.S. Sheet (6 mm thick) with nuts and bolts complete for casing size:200 mm dia |
