Military Engineer Services-MES has published Repairs To Flooring, Plastering, Roof Coverings In Servants Quarters And Garages At Baird Place, Polo Road And Parade Road And Misc Repairs At Fafa And Kabul Lines And To Otm Accn In The Area Of Age Br-Ii Under Ge East Delhi Cantt-10. Submission Date for this Tender is 20-01-2022. Shed Construction Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 04-Jan-2022 | Amendments in BOQ | BOQ | 13-01-2022 |
| 2 | 13-Jan-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-01-2022 |
| 3 | 14-Jan-2022 | Amendments | Other | 20-01-2022 |
| Sl. No. | Item Description |
| 1 | Demolition in cement concrete of cement concrete in ground floor and paving not exc. 15 cm thick below or above ground level, complete all as specified and as directed. |
| 2 | Demolition in cement concrete of any description and in any position (unreinforced),complete all as specified and as directed. |
| 3 | Demolition in cement concrete of any description and in any position (reinforced),complete all as specified and as directed. |
| 4 | Demolition of brick work built in cement mortar in any description and position complete all as specified and as directed. |
| 5 | Scraping and taking out existing old roof treatment with APP membrane of any thickness including demolition of screed bed or PCC padding of any thickness and cleaning the roof surface clear of all debris and foreign materials, complete all as specified and as directed. |
| 6 | Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key; scrubbing down with water, complete all as specified and as directed. |
| 7 | Taking down door/window/ventilator frames with shutters not exc 1.50 sqm each (without taking off shutters from frame), complete all as specified and as directed. |
| 8 | Taking down door/window frames with shutters exc 1.50 sqm but not exc 4.00 sqm each (without taking off shutters from frame), complete all as specified and as directed. |
| 9 | Taking down door/window shutters only exc 1.0Sqm but not exc 2.00Sqm each with iron mongery, complete all as specified and as directed. |
| 10 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings,complete all as specified and as directed. |
| 11 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 12 | Dismantling floor, hearth or wall ceramic tiling including cement mortar bedding (but not backing) and rubbish off the premises,complete all as specified and as directed. |
| 13 | Dismantling timber work in scantlings exceeding 40Sqcm and over in section in any position framed work,complete all as specified and as directed. |
| 14 | Dismantling timber work in fillets not exceeding 40Sqcm in section,complete all as specified and as directed. |
| 15 | Demolition of Stone slab and tiles of any description or thickenss in floors, approans etc., complete all as specified and as directed. |
| 16 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and as directed. |
| 17 | Dismantling existing water tanks capacity exc 250 ltr but not exc 500 ltrs,complete all as specified and as directed. |
| 18 | Taking up or down 15 mm bore GI tubing and connections including removal of store, complete all as specified and as directed. |
| 19 | Taking up or down 20 mm bore GI tubing and connections including removal of store, complete all as specified and as directed. |
| 20 | Dismantling of cast iron or reinforced concrete drain pipes 75mm to 100mm dia, jointed in cement mortar and taking out of trenches, wall and in shafts or other similar work,complete all as specified and as directed. |
| 21 | Hacking out old broken glass (any thickness and size quality or description from wooden frame glazed with putty,metal frame including punching or drilling out old glazing pins/spring clips), complete all as specified and as directed. |
| 22 | Excavation in post holes (or similar holes) each not exceeding 0.5 Cum and getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, complete all as specified and as directed. |
| 23 | Cutting out cracks to V-section in existing roofs or terracing surfaces, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight),complete all as specified and as directed. |
| 24 | PCC 1:2:4 type B-0 using 12.50mm graded crushed stone aggregate as in PCC padding over roof,complete all as specified and as directed. |
| 25 | PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in benching, coping, hold fast blocks etc., and similar items including weathering, slightly rounded or chamfered angles and throating on top of chajjas, rails, cills etc., complete all as specified and as directed. |
| 26 | PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in kerb stones, benching OHT platforms,etc., and similar items including weathering, slightly rounded or chamfered angles and throating on top of chajjas, rails, cills etc., complete all as specified and as directed. |
| 27 | Providing reinforced cement concrete1:1.5:3 type A-1 using 20 mm graded crushedstone aggregate as in beams, lintels etc.,complete all as specified and as directed. |
| 28 | Providing reinforced cement concrete1:1.5:3 type A-1 using 20 mm graded crushedstone aggregate as in chajjas etc., complete all as specified and as directed. |
| 29 | Providing reinforced cement concrete1:1.5:3 type A-1 using 20 mm graded crushedstone aggregate as in kitchenshelves, Chajjas, etc.,complete all asspecified and directed. Note : The rate quoted by the contractor is deemed to include the necessary scafoldings, supports etc. Nothing extra will be claimed on this account. The work will be executed upto G+3 Storyes building, complete all as specified and as directed. |
| 30 | Brick work in cement mortar 1:4 straight or curved on plan exceeding 6.0m mean radius and using old size sub class "B" bricks,complete all as specified and as directed. |
| 31 | Brick work in half brick walls using cement mortar 1:4 straight or curved on plan to any radius and using old size sub class "B" bricks,complete all as specified and as directed. |
| 32 | Marbleof any shade other than white and black 18- 20 mm thick ( table rubbed and polished ) in steps, Jambs, pillars, Cooking platform, floor and like in cement mortar 1:4 including pointing in white cement mortar 1:2 using marble dust with admixture of pigment to match with marblelaid over 20mm thik screed bed in cement mortar 1:6,bedded, jointed and pointed with grey cement slurry including cutting and polishing, complete all as specified and as directed. |
| 33 | Marbleof any shade other than white and black 18- 20 mm thick ( table rubbed and polished ) in steps, Jambs, pillars,and like in cement mortar 10mm in cement mortar (1:4) including pointing in white cement mortar 1:2 using marble dust with admixture of pigment to match with marblelaid obedded, jointed and pointed with grey cement slurry including cutting and polishing, complete all as specified and as directed. |
| 34 | 20mm thick Granite (of any type) work (table rubbed and polished)in steps, jambs, pillars, window cills, cooking platforms,dado/wall and like in 15mm thick cement mortar 1:4 including pointing in white cement mortar 1:2 using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed. |
| 35 | Use and waste of form work to soffits of floor or roof beams, beam haunchings, girders, bressumers, lintels, cantilevers, shelves including supports, overhangs etc.,for fair finished concrete surfaces, complete all as specified and as directed. |
| 36 | Use and waste of form work to soffits of suspended slabs such as roof slabs, shelves etc., not exceeding 200mm thickness for fair finished concrete surfaces, complete all as specified and as directed. |
| 37 | Use and waste of form work to soffits chullah hoods, chajjas and similar type of works for fair finished concrete surfaces, complete all as specified and as directed. |
| 38 | Glazed and gauged skelton door shutter of 2nd class hard wood 35 mm thick rebated and prepared to received glass, gauge etc (without sash bars) edges of forming plain,chamfered or rounded fitted with mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I section 8,clause 8.24(a) etc., complete all as specified and as directed. |
| 39 | Plain framed panelled shutters of 2nd class hard wood 35 mm thick (any number of panels) with lock rails and panels of 9mm thick BWP commercial ply or 12mm veneered parcticle board with commercial veneering on both faces. The size of rails and stile as per IS:1003, complete all as specified and as directed. |
| 40 | Flush door shutters 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed. |
| 41 | Flush door shutters 25mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed. |
| 42 | Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and as directed. |
| 43 | 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, complete all as specified and as directed. |
| 44 | 12mm Particle board, medium density, flat pressed,single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame worketc., complete all as specified and as directed. |
| 45 | 18/19mm thick block boards, grade 2 quality, interior grade, commercial type, fixed to frame as in shutters to cup boards etc including 18/19 x 2mm leeping/ beading all round shutters, complete all as specified and as directed. |
| 46 | 100mm long butt hinges medium weight cold rolled MS to pressed steel/angle iron frames,complete all as specified and as directed. |
| 47 | 150mm long aluminum anodized barrel tower bolt of extruded section, complete all as specified and as directed. |
| 48 | 125mm long aluminium handles cast type anodised ISI Marked, complete all as specified and as directed. |
| 49 | 250mm long MS sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and as directed. |
| 50 | Galvanised mild steel wire cloth 0.56 mm nominal dia or wire and an average width aparture 1.18 mm and fixed with tinned tack/stainless steel wire stapple with screws to wooden beads to wooden joinery,/steel joinary cost of wooden beads / flat iron beads included in the rate, complete all as specified and as directed. |
| 51 | Stainless steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless steel wire staples, complete all as specified and as directed. |
| 52 | Fiber Glass Reinforced Plastic (FRP) Door Frames of cross section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame, complete all as specified and as directed. |
| 53 | 30mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardantgrade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete all as specified and as directed. |
| 54 | Aluminium alloy powder coated (50 micron) anodized door frame of section 100mm x 44 mm x 2 mm thick, door shutter of aluminium section of size 85 mm x 44 mm x 2 mm thick, top rail and both styles of size 100 mm x 44 mm x 2 mmthick, lock rail and bottom rail of size 115 mm x 44 mm x 2mm thick incl aluminium anodized snap beading and rubber packing & 5.5 mm thick colour designer glass incl 200 mm long tower bolt-2 Nos, 200 mm long Alm handle -02 Nos on each leaf, 4 lever lock brass 100 mm long mortice lock (Make :- Godrej), & double action floor door spring(Sandhu/Samrat) heavy duty suitable for 1 m wide shutter for each leaf, complete all as specified and as directed. |
| 55 | Powder coated three track aluminium (glazed/ gauged) window shutterssliding type incl 5.5mm thick glass or stainless steel wiremesh, without sash bar aluminium saction weighting 0.55 Kg per mtr including necessary joining cleats, glazing clips, rubber packing, anodised aluminium beading, sliding channel,roller screws includingfittings, complete all as specified and as directed. |
| 56 | Aluminium anodized grills with 6mm x 5mm aluminium section having square gap of 100mm thk with fixing arrangement,complete all as specified and as directed. |
| 57 | Box type Steel windows with double shutters (inside for wiremesh & out side for glass),hinges, steel handle, tower bolt and steel peg stay complete with glazing bars dovetailed or welded including a coat of red oxide after preparation of surface before fixing all as shown in drg No. TD-A sheet 1/3 to 3/3, complete all as specified and as directed. |
| 58 | Steel ventilatorswith centre hung shutters includingsteel handles and steel peg stay complete with glazing bars dovetailed or welded, complete all as specified and as directed. |
| 59 | Repair to existing steel door andwindow by welding/replacinghinges/handle/sliding bolt/tower bolt/wire mesh or removing the steel door and window shutters from the frame and re-fixing after making serviceable, fixed in repairs,complete all as specified and as directed. |
| 60 | Repair to existing in builtsteel cup board, door, locks, hinges incl necessary welding, drilling and making the locker, steel cupboards, door complete serviceable all as per existing pattern,complete all as specified and as directed. |
| 61 | Repair to existing steel rolling shutters by repairing/welding/oiling/greasing to anchoring rod,springs,side guide channel etc incl dismantling existing steel rolling shutters of any width and refixing after making serviceable after adjusting springs including two coats of paint complete all as specified and as directed. |
| 62 | MS pipe, tube (Square/rectangular) etc as in rafters, purlins, ladders, etc., complete all as specified and as directed. |
| 63 | Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates to Fe-290 (Gde E- 165), complete all as specified and as directed. |
| 64 | Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanks, cooler stand and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed. |
| 65 | Mild steel framed work as in doors (as in chowkats) or gates of angle or other section with gusset plates, rails, braces etc., exclusive of steel sheeting or other covering, hanging or fastening and fixingcomplete conforming to Gde Fe-410-0 or Fe-310-0 including shop coat of red oxide including preparation of surface before fixing, complete all as specified and as directed. |
| 66 | TMT bars 10mm dia and over, cut to length, bent to shape required,including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. |
| 67 | TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. |
| 68 | 0.80mm thick mild steel, plain & black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc. as required, complete all as specified and as directed. |
| 69 | Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 70 | Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws, including dismantling of old unserviceable AC ridges roofing, complete all as specified and as directed. |
| 71 | Wire brushing and cleaning top surface of roof slabs after removal of existing roof treatment from dirt, mortar, dust mortar buds, algae and all other foreign matter, including flashings and junction of parapets also taking out any grass roots/vegetation etc.,washing and scrubbing the surface with water anddrying the cleaned surface for further treatment, complete all as specified and as directed. |
| 72 | Providing screed bed 10mm thick on top of cleaned concrete surfaces in cement mortar 1:4 mixed with water proofing compound,complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately under respective item. |
| 73 | Supply only liquid water proofing compound, to be mixed in cement mortar or concrete as per proportion specified by manufacturer, complete all as specified and as directed. |
| 74 | Water proofing treatment comprising of the following, using APP membrane polymer based to ptrpared roof surface complete all as specified and as directed:- (a) Applying evenly a coat of bituminous primer conforming to IS- 3384 @ 0.4Ltr/Sqm. Over the primed surface, apply a coat of hot blown 85/25 penetration grade bitumen conforming to IS- 702 @ 1.2 Kg/Sqm of the surface area. (b)Applying APP based polymeric membrane minimum weight 3.6kg/Sqm and of minimum thickness 3mm,reiforced with polyster non woven fabric ( weight not less than 150gm/Sqm). APP membrane will be laid by torching overlaps with a propane or butane gastorch and laid across the slope from lowest line of roof towards ridge with over laps of 75mm in length side and 100mm on the width side of membrane bonded with hot blown bitumen. (c) Over the APP membrane after laying apply a coat of solar reflective bituminous aluminum paint @ 0.15Kg/Sqm. |
| 75 | Providing and fixing false ceiling at all height with GRG(Glass Fibre Reinforced Gypsum) False ceiling tiles of size 595mm x 595mm of approved texture design and patterns having moisture content less than 2%, humadity resistance of 99%, NRC 0.85 (with 50mm thick glass wool) as per IS 8225 :1987, Non combustible as per BS 476 (part-4)-1970 and light reflectance of 75-85% to be laid in true horizontal level suspended on inter locking metal T-grid of hot dopped galvanised iron section of 0.3 mm thick (galvanised @120grams per Sqm including both sides) comprising of main -T runners of size 24mmx32mm of length 3000mm.cross-T of size 24mmx26mm of length 1200mm and secondary intermediate cross T of size 24mmx26mm of length 600mm to form grid module of size 600mmx600mm, suspended from ceiling using galvanised mild steel items (galvanised @80 grams per Sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85mmx25mmx2mm galvanised iron perimeter wall angle of size 24mmx24mmx0.4mm of length 3000 mm to be fixed on periphery wall/partition with the help of plastic rawl pluges at 450mm centre to centre and 40 mm long dry wall stainless steel screws, complete all as specified and as directed. |
| 76 | Aluminiumanodised snap grid frame work of size 605mm x 605mm for false ceiling withhanging arrangement of 6mm dia G .I(upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made outof GI flat 40x3 mm size and 60mm long and expension hold fastners 12.50mm dia 40mm long, complete all as specified and as directed. |
| 77 | Non asbestos 4mm thick fibre cement building boards fixed or laid / inserted to aluminium frame work with screws as in false ceiling fixed in ceiling flat or sloping, complete all as specified and as directed. |
| 78 | 75mm thick PCC 1:4:8 type D-2 (40 mm graded stone agg) as in Sub base for floor complete all as specified and as directed. |
| 79 | Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade of approved colour and design laid over with gray cement and pigment, including 30mm thick bedding layer of sandcomplete all as specified and as directed. |
| 80 | Factory made prepolished coloured chequered cement floor tiles of size 300mm x 300mm x 25mm thick, set jointed with coloured cement and pigment and pointed in neat cement slurry in floors, pavements etc including 15 mm thick cement mortar 1:4,complete all as specified and as directed. |
| 81 | 40 mm thick PCC 1:2:4 type B-1, using 20mm graded crushed stone agregate, as in floors finishes even and smooth without using extra cement, complete all as specified and as directed. |
| 82 | 25 mm thick PCC 1:2:4 type B-1, using 20mm graded crushed stone agregate, as in sub base to floor finishes, complete all as specified and as directed. |
| 83 | 75mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregates as in plinth protection finished even and fair,complete all as specified and as directed. |
| 84 | Kota stone slab 20-25 mm thick with uniform texture in floorwith laid overand including 15 mm thick screed in cement mortar 1:4and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing andpolishing, complete all as specified and as directed. |
| 85 | Kota stone slab with uniform texture of 20-25 mm thick in treader of steps, riser of steps, skirting, dado and pillarsin one single piece (size decided by Engineer-in-Charge) laid over and including cement screed 15mm thick in cement morter 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing andpolishing , bevelled edge of corner etc., complete all as specified and as directed. |
| 86 | Anti-Skid coloured ceramic tiles 6 to 7mm thick (square/rectangular) area of each tiles exceeding 0.06Sqm but not exceeding 0.11 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4,complete all as specified and as directed |
| 87 | Anti-Skid coloured ceramic tiles 6 to 7mm thick (square/rectangular) area of each tiles exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4,complete all as specified and as directed |
| 88 | Anti-Skid coloured ceramic tiles 6 to 7mm thick (square/rectangular) area of each tiles exceeding 0.18Sqm but not exceeding 0.38 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4,complete all as specified and as directed |
| 89 | Anti-Skid coloured ceramic tiles 6 to 7mm thick (square/rectangular) area of each tiles exceeding 0.18Sqm but not exceeding 0.38 Sqm in treader of steps, riser of steps, skirting, dado and pillarsin one single piece (size decided by Engineer-in-Charge) laid over and including cement screed 15mm thick in cement morter 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing andpolishing , bevelled edge of corner etc., complete all as specified and as directed. |
| 90 | Glazed ceramic coloured tile 450mm x 300mm x 6 to 7mm thick on vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including 10mm thick backing coat in cement mortar 1:4, complete all as specified and as directed. |
| 91 | Renewing tiles in patches, area not exceeding 5Sqm, including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles, complete all as specified and as directed. |
| 92 | Taking down cement plaster / duster bed PCC of Column, chajja, Parapets of roof, facia, drops etc and making good with cement plaster 10mm thick in CM 1:3 with PCC 1:2:4, (average thickness of PCC 25mm) as required, brushing neat cement slurry with 3.0kg of cement per sq. metreincluding necessary form work and scaffolding upto 3rd floor including fixing of wire netting where required to match the existing surfaces, complete all as specified and as directed. |
| 93 | Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces & finishing the surface even & smoothwithout using extra cement, complete all as specified and as directed. |
| 94 | Rendering 5mm thick on concrete surfaces in cement mortar 1:3 as in ceilings,complete all as specified and as directed. |
| 95 | Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces & finishing the surface even & smoothwithout using extra cement, complete all as specified and as directed. |
| 96 | 10-12mm thick polymer modified readymix cement based plaster Make : Ultratech (Brand name Readiplast) complying to IS-1661-1972, IS-2250-1965, IS-2402-1963) or equivalent as approved by GE, applied in ratio 1:4 as per manufacturer"s instructions, on fair faces of brick masonry or concrete surfaces finished even and smooth, including taking down of existing cement or cement lime plaster of any thickness and any description on brick or stone walls including raking out joints, hacking for key and scrubbing down with water,complete all as specified and as directed. |
| 97 | Chipping of unsound/weak concrete material from slabs, columns etc. with standard power driven percussion type or pneumatic chisel of standard make as directed by Engineer-in-charge including tapering all edges, making square shoulders of cavities etc complete and disposal of debris up for all lifts and leads, average thickness of chippings 25mm, complete all as specified and as directed by Engr-in-Charge. |
| 98 | Chipping of unsound/weak concrete material from slabs, columns etc. with standard power driven percussion type or pneumatic chisel of standard make as directed by Engineer-in-charge including tapering all edges, making square shoulders of cavities etc complete and disposal of debris up for all lifts and leads, average thickness of chippings 50mm, complete all as psecified and as directed by Engr-in-Charge. |
| 99 | Providing and fixing special water tight centering and shuttering including bolting, strutting, propping etc so as to withstand a pressure of 0.1 Mpa including removal of forms for all locations including beams, columns, slabs, walls, foundations, footings, landings, stairs, balconies etc., complete all as specified and as directed by Engr-in-Charge. |
| 100 | Providing and fixing temporary engineered steel tubular standard double scaffolding system on the exterior side, maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc with suitable working platforms at required locations with essential safety features for the workmen etc complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose, complete all as specified and as directed by Engr-in-Charge. |
| 101 | Reinforcement for R.C.C work including Cutting, bending, binding, straightening and placing in position &/or welding with the existing bars wherever necessary,complete all as specified and as directed by Engr-in-Charge. |
| 102 | Providing and placing in position Grade M25 Micro-concrete, which shall be cement based prepacked single component, chloride free, non-shrink, free flow, self compacting, ready to use after mixing water in specified proportion obtained from approved manufacturer as per specification and directions of Engineer-in-charge (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument, complete all as specified and as directed by Engr-in-Charge. |
| 103 | Reinforced Concrete: Providing and laying in position M25 grade of reinforced concrete in beams, slabs, columns upto a floor 5 level excluding the cost of centering, shuttering, formwork, complete all as specified and as directed by Engr-in-Charge. |
| 104 | Providing, mixing and applying Polymer Modified Mortarof average thickness 25mm in layers (in 2 layers), each layer not exceeding 10mm thick, including trowelling with wooden tools etc. complete as per specifications and directions of Engineer-in-charge For payment purposes, pre-measurment of thickness shall be done just after the surface preparation is completed. (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument) Cement (75mm size cube crushing strength at the end of 28-day not to be not less than 25 N/sqmm), complete all as specified and as directed by Engr-in-Charge. |
| 105 | Providing, mixing and applying Polymer Modified Mortarof average thickness 50mmin layers (in three layers), each layer not exceeding 20mm thick, including trowelling with wooden tools etc. complete as per specifications and directions of Engineer-in-charge For payment purposes, pre-measurment of thickness shall be done just after the surface preparation is completed. (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument) Cement (75mm size cube crushing strength at the end of 28-day not to be not less than 25 N/Sqmm), complete all as specified and as directed by Engr-in-Charge. |
| 106 | Shotcreting (Guniting) RCC slab 20 mm thick with approved mix mortar (with ordinary portland cement ,coarse sand in propertion (1:3) including the cost of centering and shuttering at edges and corner if required,wet curing etc.complete as directed by Engineer-in Charge. Surface shall be satisfactory evaluated by sounding /tapping with a blue metal instrument, complete all as specified and as directed by Engr-in-Charge. |
| 107 | Cleaning of reinforcement 6mm to 12mm dia of bars from rust including behind the reinforcing bars to give it a totally rust free finished steel surface by hammering the rebar, using wirebrushes, chiseling and using alkaline rust remover of approved make with paint brush and removing loose particles after 24 hrs of its application with wire brush and thoroughly washing with water and allowing it to dry, complete all as specified and as directed by Engr-in-Charge. |
| 108 | Cleaning of reinforcement of bars above 12mm dia from rust including behind the reinforcing bars to give it a totally rust free finished steel surface by hammering the rebar, using wirebrushes, chiseling and using alkaline rust remover of approved make with paint brush and removing loose particles after 24 hrs of its application with wire brush and thoroughly washing with water and allowing it to dry, complete all as specified and as directed by Engr-in-Charge. |
| 109 | Supply, mixing and applying bonding coat, including cost of material, on prepared non-metallic surface of parent material as per specifications and directions of Engineer-in-charge complete, SBR polymer @10% of cement weight) modified cementitious bond coat @ 2.2Kg cement per sqm of surface area with its proportion, complete all as specified and as directed by Engr-in-Charge. |
| 110 | Supply & Applying alkaline passivating & bonding coat of approved adhesive over reinforcement 6mm to 12mm dia bars duly approved by Engineer-in-charge with approved epoxy bonding coat as per manufacturer’s specifications including sprinkling silica sand (Nos 10),complete all as specified and as directed by Engr-in-Charge. |
| 111 | Supply & Applying alkaline passivating & bonding coat of approved adhesive over reinforcement above 12mm dia bars duly approved by Engineer-in-charge with approved epoxy bonding coat as per manufacturer’s specifications including sprinkling silica sand (Nos 10),complete all as specified and as directed by Engr-in-Charge. |
| 112 | Preparing newly plasteredsurfaces of wall and applying two coats of oil bound distemper,complete all as specified and as directed. |
| 113 | Preparing newly plasteredsurfaces of ceilings and applying three coats of white wash,complete all as specified and as directed. |
| 114 | Preparing newly plasteredsurfaces of wall and applying two coats of cement based paint,complete all as specified and as directed. |
| 115 | Preparation of old treated surfaces of walls and applying two coats of Oil bound distemberincluding a layer of Birla white/J K Whte wall care putty,complete all as specified and as directed. |
| 116 | Preparation of old treated surfaces of ceilings and applying two coats of white wash, complete all as specified and as directed. |
| 117 | Preparation of new wooden surfaces over 10cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed. |
| 118 | Preparation of old treated wooden surfaces over 10cm width or girth and applyingone coat of synthetic enamel paint, complete all as specified and as directed. |
| 119 | Preparation of new steel surfaces over 10cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of red oxide, complete all as specified and as directed. |
| 120 | Preparation of old treated steel surfaces over 10cm width or girth and applyingone coat of synthetic enamel paint, complete all as specified and as directed. |
| 121 | Preparation of GI steel tubing new or old surfaces not exceeding 10cm width or girth and applyingtwo coats of black bituminous paint, complete all as specified and as directed. |
| 122 | 4mm thick ordinary sheet glass /(black colour glass outside visible inside unvisible ) and glazing with oil putty complete in squares not exc 0.50Sqm each pane, complete all as specified and as directed. |
| 123 | 4mm thick Figured glass, pin head type and glazing with oil putty in squares nexc 0.5Sqm in each paneincluding fixingupto 8 storyed building window with necessary stair arrangement and safety arrangement to fixing upper glass panes,complete all as specified and as directed. |
| 124 | Cutting grooves in brick or stone wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3, complete all as specified and as directed. |
| 125 | Cutting chases, pinning in, making good to facing where required and pointing in cement mortar1:3 in brick or stone wall , cutting not exc 10cm girth, complete all as specified and as directed. |
| 126 | 15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs, complete all as specified and as directed. |
| 127 | 20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs,complete all as specified and as directed. |
| 128 | 500 ltrs capacity rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and as directed. |
| 129 | 20mm GI tanknipple suitable for HDPE water tank, complete all as specified and as directed. |
| 130 | Ball valve high pressure of PTMT with epoxy coatedaluminium rod & high density plastic ball screwed for iron pipe20 mm dia, fixed in repairs,complete all as specified and as directed. |
| 131 | PVC tank coverssuitable for HDPE water tank of any capacity, complete all as specified and as directed. |
| 132 | 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe, fixed in repairs, complete all as specified and as directed. |
| 133 | 15mm bore angle valve cast copper alloy Chromium plated screwed down high pressure with crutch or butterfly handlefor iron pipe etc.,fixed in repairs,complete all as specified and as directed. |
| 134 | 15mm bore bib taps standard of Chromium plated high pressure screwed for iron pipe and fixed etc. fixed in repairs,complete all as specified and as directed. |
| 135 | 15 mm bore Stop valves, cast copper alloy, fancy type, chromimum plated screwedboth ends for iron pipe or for unions, fixed in repairs, complete all as specified and as directed. |
| 136 | 15mm dia Pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure with or without lettered "Hot or Cold" with long screwed shank and fly-nuts screwed for iron pipes, complete all as specified and as directed. |
| 137 | 125 mm size Brass chromium plated shower rosesuitable for 15 mm bore pipe,fixed in repairs,complete all as specified and as directed. |
| 138 | CP brass shower rose fancy type 240mm x 240mm size for 15mm bore pipe, fixed in repairs, complete all as specified and as directed. |
| 139 | PVC connection 15mm sizes with PTMT nuts of length 450 mm,fixed in repairs,complete all as specified and as directed. |
| 140 | CP brass soap dish fixed to plugs with chromium plated brass screws in position, fixed in repairs,complete all as specified and as directed. |
| 141 | Stainless steel kitchen sink with draining board made of 1mm thick sheet for kitchen with plug washers wate pipe cast iron canti lever bracket ovre all size overall size 915mmx 460mm bowl size 410 mmx 330 mmx 160mm, fixed in repairs,complete all as specified and as directed.Make- Maharaja/Nirali/Prayag. |
| 142 | Stainless steel kitchen plate rack size 750 x 900x250 mm deep made out of 1mm thick sheet including fitting arrangement,fixed in repairs,complete all as specified and as directed. Make- Maharaja/Nirali/Prayag. |
| 143 | CP Grating doom 125mm dia with or without waste hole,fixed in repairs,complete all as specified and as directed. |
| 144 | PVC waste pipe 40/32mm dia 85cm long suitable for WHB/Sink,fixed in repairs,complete all as specified and as directed. |
| 145 | Vitreous china water closet Orissa Pan 580mm long pan Ist quality ISI marked with cast iron "P" or "S" trap including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces,fixed in repairs,complete all as specified and as directed. |
| 146 | Vitreous chinaware wash down water closet pan pedestal pattern white excluding flushing cistern but including jointing to flushing cistern and flush pipe antisyphonage pipe etc, including necessary "P"/"S" traps as required,fixed in repairs,complete all as specified and as directed. |
| 147 | 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket,fixed in repairs,complete all as specified and as directed. |
| 148 | Vitreous china wash basin under counter oveltype size 560mm x 450mm undergranite slab with all fitting and fixture, fixed in repairs,complete all as specified and as directed. |
| 149 | Looking mirror size 600mm x 450mm bevelled edges miror of selected quality glass mounted of 6mm thk AC building board or commercial plywoodand fixed to woodenplug with CP brass screws and cup washers,fixed in repairs,complete all as specified and as directed. |
| 150 | CP wall mixture diverted 15mm bore cast copper alloy Chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe etc.,fixed in repairs,complete all as specified and as directed. (Make Jaquar Model No: ORP-10118PM or equivalent in Somany/Cera/Hindware) |
| 151 | Plastic water closet seat, back, closed pattern with flat bottomand cover including mild steel chromium plated or aluminised hinging device,fixed in repairs,complete all as specified and as directed. |
| 152 | Brass spindle suitable for 15 mm bib cock / stop cock/ concealed stop cock/ angle cock, fixed in repairs, complete all as specified and as directed. |
| 153 | Brass spindle half turn suitable for 15 mm bib cock / stop cock/ concealed stop cock/ angle cock, fixed in repairs, complete all as specified and as directed. |
| 154 | Float valve for PVCflushing cistern, fixed in repairs, complete all as specified and asdirected. (Make : Tik tok/Super flow or equivalent as approved by Engr-in-charge). |
| 155 | 110mm bore PVC single socketed in any length with rubber ring joints, fixed in repairs,complete all as specified and as directed. |
| 156 | PVC bend 110mm bore any radius,fixed in repairs,complete all as specified and as directed. |
| 157 | 75mm bore PVC (SWR)floor trap,with grating including jointing with solvent cement,complete all as specified and as directed. |
| 158 | Cast iron soil waste and vent spun pipes 100mm dia, in any length, with cement joints, laid in trenches/floors, fixed to walls/floors with CI/MSclamps and conforming to IS-1729, complete all as specified and as directed. |
| 159 | Cast iron soil waste and vent spun pipes 75 mm dia, in any length, with cement joints, laid in trenches/floors, fixed to walls/floors with CI/MS clamps and conforming to IS-1729, complete all as specified and as directed. |
| 160 | CI bend for 100mm bore any radius, diminishing pieces or tapers (larger bore measured), fixed to walls, complete all as specified and as directed. |
| 161 | CI bend for 75mm bore any radius, diminishing pieces or tapers (larger bore measured), fixed to walls, complete all as specified and as directed. |
| 162 | 100 mm bore cast iron floor trap, nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), fixed in repairs,complete all as specified and as directed. |
| 163 | 100mm cast iron`S" trap for water closet, complete all as specified and as directed. |
| 164 | Salt glazed stone ware gully traps 150 x 150mm square mouth `P" type,fixed in repairs,complete all as specified and as directed. |
| 165 | Dismantling of floor of WC with Indian type Water closet and removing out the cinder/concrete from sunken protion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditons, grinding any sharp edges etc complete all as specified and directed. (a) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc. (b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite. (c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified. (d) M&L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall. (e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed. (f) The area of Each WC portion is n.exc 2.00Sqm each. (h) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account. Note : The work will be executed by authorised manufacturers/applicator. |
| 166 | Demolition of reinforced cement concrete water tank of any thickness of size not exc 3.0mtr x 3.0mtr x 2.0mtr/1.50mtr dia and 2.0 ht at roof level and making the surface smooth with PCC 1:2:4 type B-0, using 12.5mm graded crushed stone aggregate and plaster and disposing the rubbish from the site (MOD land) for a block of multistoried flats, including necessary form work and safety equipment,complete all as specified and as directed by Engineer-in-charge. |
| 167 | Removal ofgrass, shrubs, vegetation, plants and rubbish of any type and any thickness from walls, shafts, roofs including taking out plant roots from roof/brick work or concrete surfaces from multistoried blocks of any height and making good the distrubed surfaces with cement mortar 1:3 including disposing the rubbish from the site (MOD land), complete all as specified and as directed by the Engineer-in-Charge. |
| 168 | NOTE:- Irrespective of whatever specified elsewhere in tender documents, all the debris/waste materials produced out of above mentioned work shall be removed out of Cantonement land and disposed off at locations notified by the Delhi Cantonment Board for disposal of waste building materials within NCR area,without any extra cost to Department under own arrangement of contractors. The rates quoted by the contractors against the items catered here-in-above in the BOQ are inclusive of said provision. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
