Construction Of Building For Office Building For Deputy Commissioner For Excise ( Southern Division ) , Berhampur, Divisional Excise Chemical Testing Laboratory And Excise Station, Ei And E.B Unit Of ( Sd ) , Berhampur Building Work ( Composite Bid, Berhampur-Odisha

TDR : 30503307

Tender Notice
BOQ

Expired

Berhampur , Odisha

Tender Brief : Construction Of Building For Office Building For Deputy Commissioner For Excise ( Southern Division ) , Berhampur, Divisional Excise Chemical Testing Laboratory And Excise Station, Ei And E.B Unit Of ( Sd ) , Berhampur Building Work ( Composite Bid

Document Fees
₹ 10000 /-

EMD
Refer document

Tender Value
₹ 2.20 Crore /-

Submission Date
12-01-2022

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Civil Work : Earth work inexcavation of foundation & plinth in Hard soilwith all leads and lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour and T&P and dewatering if required for the work etc. complete and as directed by the Engineer-in-charge
2	Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per direction by the Engineer in charge.
3	Providing Plain Cement Concrete of prop (1:3:6) using 40mm size crusher broken granite metal of approved quality and from approved quarry including hoisting lowering and laying concrete in layers not exceeding 15 cm (6”) thick to the required level ramming, watering and curing etc. complete including cost and conveyance of all materials with all taxes and royalities and all labour with T&P required for the work etc. complete, including dewatering if required.
4	Fly Ash Brick masonry in C.M. (1:6) using 9\" size in Foundation & Plinth using of 23cmx11cmx8cm size brick having a crushing strength of not less than 75 kg per Sq.cm including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, royalties of all materials, labour with T&P etc. complete in all respect as directed by the Engineer-in-charge.
5	Fly Ash Brick masonry in C.M. (1:6) using 9\" size inSuper structure using of 23cmx11cmx8cm size brick having a crushing strength of not less than 75 kg per Sq.cm including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, royalties of all materials, labour with T&P etc. complete in all respect as directed by the Engineer-in-charge.
6	Ground Floor
7	First Floor
8	Second Floor
9	R.C.C. work of M-20 grade having minimum compressive strength in work test of 200 Kg/Cm2 at 28 days using20 mm and down graded size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing for 28 days, centring & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties of all materials , cost of all labour with cost of all T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position etc complete as per direction of Engineer-in-Charge.
10	RCC Footing
11	Plinth Beam
12	Column in Super Structure
13	Ground Floor
14	First Floor
15	Second Floor
16	RCC Roof Beam
17	Ground Floor
18	First Floor
19	Second Floor
20	RCC Lintel
21	Ground Floor
22	First Floor
23	Second Floor
24	RCC Chajja
25	Ground Floor
26	First Floor
27	Second Floor
28	RCC Roof Slab
29	Ground Floor
30	First Floor
31	Second Floor
32	Stair Case
33	Ground Floor
34	First Floor
35	Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, of all materials, cost of all labour, T&P etc. required for the complete in all respect as per direction of the Engineer-in-charge.
36	Straightening cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. rods or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL (Grade Fe-500D) confirming to I.S. 432 (Plain) and 1785 (Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper position required for R.C.C. works including cost, conveyanceof M.S. rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour with all T&P required for the work etc. complete as directed by the Engineer- in-Charge.
37	Ground Floor
38	First Floor
39	Second Floor
40	2.5 cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm downgraded size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties and taxes of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge.
41	Ground Floor
42	First Floor
43	Second Floor
44	Providing 12 mm thick C.P. with C.M. (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties andof all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
45	Ground Floor
46	First Floor
47	Second Floor
48	Providing 16mm thick C.P. with C.M. (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties andof all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
49	Ground Floor
50	First Floor
51	Second Floor
52	Providing 06 mm thick C.P. with C.M. (1:4) with finished smooth to RCC surfaceincluding watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royaltiesof all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
53	Ground Floor
54	First Floor
55	Second Floor
56	Supplying, fitting, fixing ofVitrified Tile size (600mm x 600 mm) Color / Printed in floors oftreads on steps and landing of Kajaria / Regency / Jonson / NITCO on 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.
57	Ground Floor
58	First Floor
59	Supplying, fitting, fixing ofIndustrial Vitrified Tile size (300mm x 300 mm) Color / Printed in floors oftreads on steps and landing of Kajaria / Regency / Jonson / NITCO on 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.
60	Ground Floor
61	First Floor
62	Supplying, fitting, fixing ofVitrified Tile in Dado oftreads on steps and landing of Kajaria / Regency / Jonson / NITCO on 25mm thick bed of cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.
63	Ground Floor
64	First Floor
65	Finishing surface of walls with Wall putty of approved make and finishing the surface smooth and even by sand papering to receive paint in walls, at all heights with staging wherever necessary with cost, conveyance,of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. for all floors
66	Finishing wall surface with2 (two) coats of weather seal coat over a coat of primer of approved shade and approved make to give an even shade after scrapping old paint with scrapper, washing with soda water, priming with approved new primerincluding cost of all material of all materials and labour with T&P etc. complete as per direction of Engineer-in-Charge.
67	Ground Floor
68	First Floor
69	Second Floor
70	Finishing wall surface with2 (two) coats of Plastic Emulsion (P.E) Paint over a coat of primerincluding including cost of all material of all materials and labour with T&P etc. complete as per direction of Engineer-in-Charge.
71	Ground Floor
72	First Floor
73	Second Floor
74	Supply and fitting, fixing of un-plasticised Po+ly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA Ltd)Three Track - Three Panel sliding window - 60 Series duly manufactured using UPVC reinforced profiles of 108mmx45mmx2.5 mm for outer frames, 38mmx58mmx2.5mm capable of mounting single glazing system, structurally reinforced with hot dip galvanishedupto 50 microns of minimum thickness of 1.5mm prefebricated and welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT - GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminum 1 No per set or sashed and the system is to be installed at the site using Reinforced Large Coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc, including cost and consveyance of all materials accessories labour charges, materialsn and product conforming to ASTM D 638-14, EN-477-95 and other applicable codes and standards as per specification and direction of Engineer-in-Charge.
75	Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) (FENESTA / casement doors openable shutter -60 series duly manufactured using UPVC reinforced profiles of 60mmx 56mm x 2.25 mm for outer frames, 102 mm x 60mmx 2.25mm for casement Door Sash Profile and 74mm x 60 mm x 2.5 mm mlullion profile capable of mounting single glazing system,structurally reinforced with hot dip galvanized upto 50 microns of minimum thickness of 2.0 mm prefabricated and welded through fusion welding the Door sash shall be fitted with 12mm thick WPC board of greenply make duly fixed withEPDM weathering seal resistance and accessories like closing looking system made of aluminum 1 No per set of sashed and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc.including cost and consveyance of all materials accessories labour charges, materialsn and product conforming to ASTM D 638-14, EN-477-95 and other applicable codes and standards as per specification and direction of Engineer-in-Charge.
76	Supplying M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar of 10mm as per approved drawing and designwith cost of all materials & labour, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.
77	Providing & Fixing of AcousticalMineral Fibre Board of RH-99 with microperforated,finely granulated surface texture , beveled tegular edge with 6mm Black Revealedexposed grid Suspended False Ceiling System,with tiles of Humidity Resistance (RH) of 99%, NRC Upto 0.5, awvalue 0.6, CAC- 34dB ,Light Reflectance >85%, thermal Conductivity k = 0.052- 0.057 w/m K, Colour White, Fire Performance Class- 0/ Class -1 (BS476 Part 6&7) in module size of 600 X 600 X 16 mm with Bio Block coating on the face of the tile,suitable for Green Building application, with Recycled content of 63%, fixed to G.I.grids of system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 38mm , having stiches both perpedicular and horizontal to make it stronger, and a load carrying capacity of minimum 15.68 Kgs/Sqm. The Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 120 grams per SQM & passed through 500 hrs of Salt test. The Tile & Grid system used together should carry a 15 year warrantee. The main G.I. runner spaced at 1200mm centre to centre securely fixed to the structural soffit using G.I.suspension systemat 1200mm maximum centr to centre & not more than 150mm from spliced joints.The First/Lastsuspension system at the end of each main runner should not be greater than 600mm from the adjacent wall. 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module.Cut cross tees longer than 600mm require independent support.600 x 600mm modules to be formed by fitting 600mm long cross tees centrally between the 1200 mm cross tees.The 1200mm cross tees to have central “birdsmouth” notches to facilitate fitting of 600mm cross tees. Perimeter trim to be shadow wall angle (dimensions: 19x7x7x14mm), secured to walls at maximum 450 mm C/C,complete in all respect with all cost ,labour,T & P,Taxes etc as per direction of the Engineer - in - charge.
78	Painting two coats over a coat of primer with anyapproved synthetic enamel paint of approved colour, shade overIron workincluding sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.
79	Ground Floor
80	First Floor
81	Second Floor
82	Cement concrete of proportion (1:2:4) using 12 mmhard black crusher broken granite chips of approved quality and from approved quarry including hoisting, lowering and laying concrete, watering and curing for four weeks with cost, conveyance and royalities of all materials with labour, T&P etc. complete as per approved specification & direction of the Engineer-In-Charge.
83	Ground Floor
84	First Floor
85	Providing & fixing Plain 5mm thick A.C.P. plate wall panelling by adjustable G.I. Ceiling angle with spread at adistance not more than 600 mm fixed to roof by Rowl Plug & stiff cleat, 5mm thick A.C.P. plate held by G.I. perimeter channel MF-3 & intermediate channel MF-7,framing,boarding,jointing & finishing etc.including cost, conveyance and royalities of all materials with labour, T&P etc. complete as per approved specification & direction of the Engineer-In-Charge.
86	ProvidingandFixing of Structural Glazing approvedmaketo be febricatedfromroll formed sections made ofprepaintedsteel(base steel as per IS-513 of 0.6mm thick \"D\"quality galvanized as per IS-277 with zinc of120gmpersqm) with primer of 5 - 75.7microns thick and finished paint with po-lyster paint ( Black / Pearl white / Chocolatebrown) of12-16microns along with the alkydbacker atthebackof5-7 microns and thesizes of outer frame being46 x 52mm andwith all vertical & horizontal mullions areof46 x 70mm and fixed beading are of 18 x 25mm. Sectionsfor internaltopandbottomframes inthe louvered area should be 18 x40mm. Top hung shutter should be 46x46mm. Accesories/ ed beadings are of 18x25mm. Accessories/ gaskets are to be used as per the manufacturer\"s supplyandspecification like handle being made of high grade aluminium powder coated and with nylon recever and gasket will be made of EPDM. All cornerbrackets are to be made of CRCA with zinc phosphating. The mullion caps and louvered-clips should be glass filled nylon. The sections are to be cut to length jointedand assembled by means of corner bracket and frames are fixed to the concrete / masonry walls bymeansofself expanding screws andglass to be used with safety laminated glass of 12.38 mm thick with 0.76 mm inter layer Poly Vinyl Butyral (PVB)lamination between two glass with outer being 6 mm thick toughened reflective of Reflactsol series of Saint Globain & inner glass being of 6mm thick toughened clear of Saint Gobain makewith all taxes and as per direction of Engineer-in-Charge.
87	Providing fixing and fitting of 110 mm dia PVC rain water pipe of approved quality and approved make confirming to IS with necessary bends and clamps etc. complete fixed to wall with nail etc. as per the direction of Engineer-in-Charge including cost of all materials with taxes labour T&P etc complete in all floors.
88	Filling foundation and plinth with execavated earth well watered, compacted with cost of all materials, labour T&P etc complete as per direction of Engineer-in-Charge.
89	Providing 20 mm thick C.P. with C.M. (1:4) with finished smooth to Stone work surfaceincluding watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royaltiesof all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
90	E.I. Works : Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit with 5A ,250V piano type switch ISI marked and ceiling rose ISI marked mounted on MSbox having front bakelitecover of suitable size, MSbox with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/ RHINO/Havells/V-Guard/KEI)
91	Group-A-L.P-50 F.P- C.B.P-
92	Group-B L.P-40F.P-40C.B.P-
93	Group-CL.P-31F.P-24 C.B.P-4
94	Recessed wiring to 5A /6Amp socket outlet with 2 X 1.5sq.mm FR PVCinsulated single core multistrand copper conductor of ISI marked in recess 20mm dia non metallic PVC flexible conduit with piano type switch, Phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor forloop earthing etc. as required (Make of wire -Finolex/ L&T/ Anchor/ Havells/V-Guard/KEI) Separate
95	Separate
96	Supply and fixing of 5Amp plugwith switch on existing board (Piano type )
97	Supply and fixing ofmetal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing of 6pin 5/6 & 15/16Amp socket outlet and15/16Amp piano type switches connection painting etc. as required. (make-Anchor/ Cona)
98	Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in surface /recessed PVC conduit as required (make of wire -Finolex/L&T/Anchor/Havells/V-Guard/KEI/RHINO)
99	2 X 1.5sq.mm +1 X 1.5sqmm
100	2 X 2.5sq.mm +1 X 1.5sqmm
101	2 X 4sq.mm +1 X 1.5sqmm.
102	2 X 6sq.mm +1 X 2.5sqmm.
103	Supply and fixing of superior type call bell of ISI marked, on 6\" X4\"conforming to IS-2268/1994 and bell push of ISI marked , conforming to IS-1293/1988 (make-Cona/Anchor)
104	(Ding Dong) call bell .
105	Supply and fixing Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required
106	S/F of Chemical Earthing size of chemical earth bar 2mtr. Size of earth feet 3\"X2\"X9\" chemical compound to be used 50 kg
107	Extra G.I flat 30 X 6mm
108	Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S.)
109	8way, Double door
110	Supply and fixing of 5Amp to 32A rating 240V \"B\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S)
111	Single pole (SP)
112	Supply and fixing of63Amp Triple Pole & Neutral (TP&N)(make Legrand )Model No-408683
113	S/F of 32Amp DP MCB Hager/Legrand/C&S make including box
114	Supply ,installation, testing and commissioning of main switches (IS 13940 part-3/1993 ) of following capacity on existing surface/wall mounting and completer with HRC fuse links, interconnections, earthing etc. as required(Make-Seimens/ HPL/ Anchor/ L&T/Havells/C&S/RK)
115	100/125AmpICTPN main switch on MS angle frame with HRC Fuse
116	Supply and fixing of copper bus bar with suitable sheet metal enclosureon MS angle frame with proper grouting on wall including all connections.
117	100Amp TPN bus bar-300 X 32 X 3mm size
118	Supply and fixing of different type of fitting with lamp
119	S/F of 20W 4\"LED fitting Surface LED Light fitting (Make-Havels/Philips/Bajaj/Crompton/Helonix)
120	S/F of 18W 1\"X1\" Surface/recessed on Ceiling LED fitting (Make-Havels/Philips/Bajaj/Crompton/Helonix)
121	S/F of 60WLED street light fitting(Make-Havels/Philips/Bajaj/ Crompton/Helonix)
122	S/F of 90W LED street light fitting (Make-Havels/Philips/Bajaj/ Crompton/Helonix)
123	S/F of G.I. Street light Bracket with M.S. Clamp
124	Supply and fixing of fan (make-Usha/Orient/V-Guard/Khaitan/Havells/Crompton/Almonard/V-Guard)
125	S/F of 1200mm High speed Ceiling fan, Heavy Duty,durable, copper winding,Aluminium blade(ISI mark)Crompton Grave/Khaitan/Orient/Polycab/Halonix/V-Guard
126	Exhaust fan 300mm
127	Supply of PVC/XLPE Aluminium armored cables ISI marked.(Make- Glowstar/ Polycab/Nicco/KEI/RHINO as per letter No-309 19.1.2011 of SEEC (R&B) Odisha)
128	16sq.mm 4core
129	Cable laying
130	Cable laying onwall surfacewithsteel shaddle 25sqmm
131	Supply and fixing of fan regulator(Cona/ Anchor/ Usha/Bajaj)
132	Electronics step type
133	Supply , installation , testing and commissioningINDOORpannel boardwith danger board
134	16/18 SWG pannel box 36 X 48X5=sq. inch for single doormade out of CR sheet of 16SWG and boarder angle frame to provide above pannel with proper space ,hinges, and other accessories , hinged door must be painted one coated red oxide and two coat enamel gray paint
135	Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand single core cables duly crimped with copper lugs and all connections 36 X 48 including cost of copper conductor and other fittings like gasket ,screw , nut and bolt , insulating materials etc.
136	S/F of bus bar 50 x 8mm with required size of insulating material and nut and bolts
137	Supply and fixing of Ammeterwith selector switch including all connections
138	Supply and fixing of voltmeter with selector switchincluding all connections
139	Supply and fixing of Indicator lamp with toggler switch and fuse
140	Supply and fixing of C.T coil upto 400Amp including all connections
141	Supply and fixing ofTPN switch disconnector fuse (pannel mounted type with ISI marked HRC fuse ).
142	Supply and fixing of 100Amp TPN switch disconnector fuse (pannel mounted type with ISI marked HRC fuse ).
143	Supply and fixing of 160Amp TPN switch disconnector fuse (pannel mounted type with ISI marked HRC fuse ).
144	Supply and fixing of 250Amp TPN switch disconnector fuse (pannel mounted type with ISI marked HRC fuse ).
145	Supply of Invertor,UPS 2250/1600VA Pure Shine wave (Make Microtech/Su-kam/Luminous/Crompton)
146	Supply of Invertor Battery 12V 150AH(Make Exide/Amrom/Su-kam/Luminous/Crompton with 48 Month warranty)
147	Supply of Invertor Stand(Make Microtech/Su-kam/Luminous/)
148	Supply and fixing of A.C machine (Carrier-Toshiba/ LG/Hitachi)
149	S/F of 2ton Split Type A.C machine (3 star make)
150	S/F of 5KVA voltage stabiliser (CG/Shakti/V-guard/Autotac)(I/p-90V to 270V, O/P-200V to 240V)
151	S/F of 1.5ton Split Type A.C machine (3 star make)
152	S/F of 4KVA voltage stabiliser (CG/Shakti/V-guard/Autotac)(I/p-130V to 270V, O/P-200V to 240V)
153	Installation charges of AC machine
154	Supply and fixing of Stand for AC Machine
155	S/F of Copper Pipe 5/8\" to 1/4\"
156	S/F of 3 core wire for AC machine
157	S/F of Drain Pipe
158	Supply and drawing of following size PVC insulated single core multistrand copper conductor in existingsurface/recessed/STEEL / conduit as required.
159	1 X 1.5sqmm
160	3 X 1.5sqmm
161	S/F of computer board consisting 3 nos 5amp and 1 nos 15amp switch and socket
162	GPH Works : Supplying allmaterials, labour, T&P and providing and fixing to wall or ceiling and floor IS marked galvanised mild steel tubes (medium grade) confirming to IS: 1239/1990, part-1 of the following nominal bore, tube fittings and clamps including making good the wall , ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.
163	In ground floor
164	32 mm dia G.I pipe
165	40 mm dia G.I pipe
166	In first floor
167	32 mm dia G.I pipe
168	In second floor
169	32 mm dia G.I pipe
170	Supplying allmaterials, labour, T&P and providing and fixing to wall or ceiling and floor C-pvc pipesand pipe fittings of the following nominal borewith clamps including making good the wall , ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.
171	In ground floor
172	20 mm C-PVCpipes
173	25 mm C-PVCpipes
174	In first floor
175	20 mm C-PVCpipes
176	25 mm C-PVCpipes
177	supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. all complete as per P.H. specification and direction of E.I.C.
178	250 mm thick wall in GF
179	250 mm thick wall in FF
180	supplying all materials, labour, T&P and cutting holes in R.C.C. floors, roofs, erc. up to 19 Cm. thick for passing G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. and reparing the holes after insertion of pipes etc. with cement concrete (1:2:4) including finishing complete so as to make it leak proof as perdirection of E.I.C.
181	In ground floor
182	In first floor
183	Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C.
184	In ground floor
185	In first floor
186	Supplying all materials, labour, T&P and painting two coats with white enamel paint brushing interior over one coat of priming with red oxide zinc chrome primer on the external surface of new galvanised mild steel tubes and fittingfs of following nominal diameter to give an even shade including preparing the surface and cleaning the surface of all dirt, dusts and foreign matters as per direction of the E-I-C
187	In ground floor
188	25mm to 32 mm dia
189	40mmto 50 mm dia
190	In first floor
191	25mm to 32 mm dia
192	In second floor
193	25mm to 32 mm dia
194	Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.
195	15mm dia Cp Long body bib cock (Jaquar)No.CON-CHR-107KN
196	15mm dia Cp Swan Neck bib cock(Jaquar)No.CON-CHR-123BKN
197	15mm dia CP angle stop cock(Jaquar)No.CON-CHR-053KN
198	20mm dia CP Concealed stop cock(Jaquar)No.CON-CHR-083KN
199	15mm dia Cp two way bib cock(Jaquar)No.CON-CHR-041KN
200	15mm dia CP health faceut (Jaquar)No.ALD-CHR-573
201	25mm dia brass or gun metal full way valve(shakti make)
202	32mm dia brass or gun metal full way valve(shakti make)
203	15mm dia CP Flange
204	15mm dia CP Extention Nipple
205	125mm CP grating
206	Supplying all materials, labour, T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701--1996 including cutting holes through the tank and fixing mild steel ltubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting up to a height of 5 meters above ground level and placing the tank to the required position and providing 1st class K.B.Brick work in cement mortar (1:6) of 0.46mt. height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C.slab of size 1.60mt.x1.60mt. and 0.10mt. thick, R.C.C.beam of 0.25mt.x0.30mt. and 2.60mt. average length in cement concrete (1:2:4) using 12mm size h.g.chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge.
207	2000 litre capacity water storage tanks on roof of SF
208	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge.
209	110mm diameter U-PVC SWR pipes(Supreme/Ashirvad)
210	110mm U-PVCdoor Tee
211	110mm U-PVC offset
212	110mm U-PVCdoor bend
213	110mm U-PVCplain shoe bend
214	110mm U-PVC cowl
215	110mm P-trap
216	110mm U-PVCplain Tee
217	110mm U-PVCplain bend
218	Supplying all materials,labour T&P and cutting holels through existing brick or laterite masonry wall for taking H.C.I pipes and fittings including making good the damages etc. all complete as per P.H.Specification and direction of the Engineer in charge.
219	250mm to 375mm thick wall
220	Supplying all materials, labour T&P and and fixing 10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer in charge
221	10 Liters capacity PVC cistern with 32mm dia flush bend(Parryware/Hindware/Neycer/Rak)
222	Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI \"p\" or \"s\" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge.
223	580mm size Orissa pan(Parryware/Hindware/Neycer/Rak)
224	Supplying all materials,labour,T&P and fixing the following vitreous china wash down water closet(European type W.C.pan) with integral \"P\" or \"S\" trap to the fllor with wooden plugs and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar(1:1)fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc.all complete as per specification and direction of the Engineer-in-charge.
225	One piece closet(Hindware)No.92072
226	European water closet with \"P\" trap plain(Parryware/Hindware/Neycer/Rak)
227	Supplying all materials, labour, T&P and fixing bowl pattern urinal of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls land making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge.
228	Halfstall urinal with 32mm flush bend(Hindware)
229	15mm CP spreader
230	32mm dome waste
231	Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge
232	Squatting Urinal
233	Supplying all materials, labour, T&P and providing Granite slab urinal partition wall including cutting grooves in wall and making good the damages including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge ,
234	Urinal Partition Wall- 8x1.20x0.75
235	Supplying all materials, labour, T&P and fixing washlaboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge
236	600mmx450mmx250mm Porcelainsink
237	Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks (Plaza make)and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge
238	550mmx400mm W.H.basin with porcelain pedestal & Plaza make fittings(Parryware/Hindware/Neycer/Rak)
239	Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer in charge.
240	600mmx450mm size B.E.mirror
241	Supplying all materials, labour, T&P and fixing standard size glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification anddirection of the Engineer in charge
242	600mmx125mm glass shelf with CP/NP guard rails(Jaquar make)CAN-SSF-1171N
243	Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete withCP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
244	25mmx600mm long CP towel rail (Jaquar make)AKP-CHR-35711P
245	Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
246	CP soap holder (Jaquar make)AKP-CHR-35731P
247	Providing and fixing factory made Rajshri PVC door frame of size 50x47mm with a wall thickness of 5mm,made out of extruded 5mm rigid PVC roam sheet,mitered at corners and joined with 2 Nos.of 150mm long brackets of 15x15mm M.S.square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S.square tube of 19 gauge,EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S.screws of 65/100mm size & 30mm thick factory made Rajshri PVC flush door shutter consisting of panel of hollow PVC profiles of 20mm thickness consisting of frame made out of M.S.Tube of 19 gauge thickness and size 19x19mm inserted inside the hollow section of stiles top & bottom rails and two 19x19mm M.S.Tube horizontally inside the hollow profiles section as an equal distance from top & bottom of door & fixed with hollow profile section using 5mm thick pvc sheet using screw. Hallow PVC profiles shall be filed with 10mm(5mmx2) thickx20mm width on stiles and rails using solvent cement. The inner part shall be laminated with 5mm thick termite proof,water proof & fire retardant pre lam PVC sheet using solvent cement on both the sides of the panel.(S.S.Hinges 100mm,S.S.Tower Bolt 150mm,S.S.Handle 150mm).Complete as per direction of the Engineer-in-charge.
248	Supplying all materials, labour, T&P and filling in foundaton and plint with sand well watered and rammed including conveyeance of all materials to worksite,payment of royalty, taxes etc all complete as per direction of the Engineer in charge.
249	Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 40mm H.G metal including watering, curing and conveyance of all materials to site.
250	In ground floor -
251	Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as aper specification and direction of the E.I.C.
252	In ground floor -
253	In Firstfloor - 3.60x4.55x0.10=
254	Supplying all materils, labour, T&P providing Matfinishtile in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement 1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer-in-charge(size 600x600mm,Kajaria-Fogparla or equivalent make to be pre-approved by the EIC).
255	In ground floor -
256	In first floor
257	Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4)on brickwork inclding watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
258	In ground floor -
259	In first floor -
260	Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge(size 600x300mm of Kajaria-Durenmarfil or equivalent make to be pre-approved by the EIC).
261	In ground floor
262	In first floor
263	Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 80 PSS UV of size 750x570x1350mm height with water storage capacity 80 liters along with 2 nos of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all completeas per approved drawing,specification and direction of the Engineer in charge.
264	(Aqua guard) Pure Chill 80 PSS UV
265	Supplying all materials, labour, T & P and constructing Gully trap chamber of the following inside size with 8 cm thick R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap , K.B. brickwork in CM ( 1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mm x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as per aproved drawing , specification and direction of Engineer in charge
266	250mmx250mm with RCC cover
267	Supplying all materials, labour, T & P and constructing Inspection chamber of the following inside size with CC (1:3:6) mix using 40mm size h.g. metal on bed, Ist class K.B. brickwork in CM ( 1:6) , moulding and shaping the channel inside and benching with CC (1:2:4) using 12mm size h.g. chips, 12mm thick cement plastering (1:3) finished with punning to inside , cement flush pointing (1:3) to outside , R.C.C. cover slab in ( 1:2:4) using 12mm size h.g. chips with RCC man hole cover , earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering ,curing, conveyance of all materials to worksite , payment of royality , taxesetc. all complete as per aproved drawing , specification and direction of Engineer in charge
268	Inside size 760mm x760mm x460mm
269	Sinking of 200mmx150mm dia Bore well through DTH Method.
270	Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
271	Drilling of 200mm dia bore 0mtr to 45mtr
272	Drilling of 150mm dia bore 46mtr to 100mtr
273	Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
274	Lowering of 200mm dia GI/P.V.C/MS casing pipes 0 mtr to 45 mtrs
275	Cost of 200mm dia P.V.C schedule-80 pipe
276	Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
277	By DTH/Rotary Rig
278	Supplying all materials and labour,tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level(as per drawing)to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock the bottom to ensure sanitary sealing.
279	Sanitary sealing upto 5mtrs below ground level.
280	CC(1:2:4)with 12mm chips for grouting upto 5 mtr.Depth in sanitary sealing.
281	Supplying allmaterials, labour, tools and plant and withdrawing casing pipesfrom the unsuccessful boreand depositing in the departmental storein good condition.
282	Withdrawal of casing pipes

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Building For Office Building For Deputy Commissioner For Excise ( Southern Division ) , Berhampur, Divisional Excise Chemical Testing Laboratory And Excise Station, Ei And E.B Unit Of ( Sd ) , Berhampur Building Work ( Composite Bid, Berhampur-Odisha

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Building For Office Building For Deputy Commissioner For Excise ( Southern Division ) , Berhampur, Divisional Excise Chemical Testing Laboratory And Excise Station, Ei And E.B Unit Of ( Sd ) , Berhampur Building Work ( Composite Bid, Berhampur-Odisha

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us