Supply Of Balance Pulleys Supply Of Pulleys For 1X250mw Nspcl Rourkela Project , Main Supply , Drive Pulleys Of 1400Mm Bw With 500Mm Pulley Diameter, 125Mm Shaft Diameter At Bearing For Bcn-1A/1B As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings, Plummer Blocks,Plummer Blocks,Fixingbolts, Nuts And Washers , Drive Pulleys Of 1400Mm Bw With 800Mm Pulley Diameter, 150Mm Shaft Diameter At Bearing For Bcn-3A/3B As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings, Plummer Blocks,Plummer Blocks, Fixingbolts, Nuts And Washers , Drive Pulleys Of 1400Mm Bw With 800Mm Pulley Diameter, 150Mm Shaft Diameter At Bearing For Bcn-4Aas Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings, Plummer Blocks,Plummer Blocks, Fixingbolts, Nuts And Washers , Drive Pulleys Of 1800Mm Bw With 500Mm Pulley Diameter, 125Mm Shaft Diameter At Bearing For Bfd-1/3 As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings , Plummer Blocks, Fixingbolts, Nuts And Washers , Drive Pulleys Of 1800Mm Bw With 500Mm Pulley Diameter, 125Mm Shaft Diameter At Bearing For Rbf-2/4 As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings, Plummer Blocks,Plummer Blocks,Fixingbolts, Nuts And Washers , Non Magnetic Drive Pulleys Of 1400Mm Bw With 800Mm Pulley Diameter, 200Mm Shaft Diameter At Bearing For Bcn-2A/2B As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings, Plummer Blocks,Locking Assembly , Fixing Bolts, Nuts & Washers , Bend And Snubpulleys Of 1400Mm Bw With 315Mm Pulley Diameter, 90Mm Shaft Diameter At Bearing For Bcn-1A/1B As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings, Plummer Blocks,Plummer Blocks,Fixingbolts, Nuts And Washers , Bend And Snubpulleys Of 1400Mm Bw With 500Mm Pulley Diameter, 150Mm Shaft Diameter At Bearing For Bcn-2A/2B As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings, Plummer Blocks, Fixingbolts, Nuts And Washers , Bend And Snubpulleys Of 1400Mm Bw With 500Mm Pulley Diameter, 125Mm Shaft Diameter At Bearing For Bcn-3A/3B As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings, Plummer Blocks,Fixingbolts, Nuts And Washers , Bend And Snubpulleys Of 1400Mm Bw With 500Mm Pulley Diameter, 125Mm Shaft Diameter At Bearing For Bcn-4A As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings, Plummer Blocksfixingbolts, Nuts And Washers , Snubpulleys Of 1800Mm Bw With 315Mm Pulley Diameter, 90Mm Shaft Diameter At Bearing For Bfd-1/3 As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings, Plummer Blocks Fixingbolts, Nuts And Washers , Snubpulleys Of 1800Mm Bw With 315Mm Pulley Diameter, 90Mm Shaft Diameter At Bearing For Rbf-2/4 As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings , Plummer Blocks Fixingbolts, Nuts And Washers , Tail & Take Uppulleys Of 1400Mm Bw With 400Mm Pulley Diameter, 100Mm Shaft Diameter At Bearing For Bcn-1A/1B As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings , Plummer Blocks Fixingbolts, Nuts And Washers , Tail & Take Uppulleys Of 1400Mm Bw With 630Mm Pulley Diameter, 170Mm Shaft Diameter At Bearing For Bcn-2A/2B As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings , Plummer Blocks Fixingbolts, Nuts And Washers , Tail & Take Uppulleys Of 1400Mm Bw With 630Mm Pulley Diameter, 125Mm Shaft Diameter At Bearing For Bcn-3A/3B As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings, Plummer Blocksfixingbolts, Nuts And Washers , Tail & Take Uppulleys Of 1400Mm Bw With 630Mm Pulley Diameter, 100Mm Shaft Diameter At Bearing For Bcn-4A As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings , Plummer Blocks Fixingbolts, Nuts And Washers , Tail Pulleys Of 1800Mm Bw With 400Mm Pulley Diameter, 100Mm Shaft Diameter At Bearing For Bfd-1/3 As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings, Plummer Blocksfixingbolts, Nuts And Washers , Tail Pulleys Of 1800Mm Bw With 400Mm Pulley Diameter, 100Mm Shaft Diameter At Bearing For Rbf-2/4 As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings , Plummer Blocks Fixingbolts, Nuts And Washers , Belt Hold Downpulley Of 1400Mm Bw With 315 Mm Pulley Diameter, 80Mm Shaft Diameter At Bearing For Bcn-4A As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings , Plummer Blocks, Fixingbolts, Nuts And Washers , Deflector Pulley Of 1800Mm Bw With 219 Mm Pulley Diameter, 70Mm Shaft Diameter At Bearing Foras Elaborated In Annexure-A Of Technical Enquiry Specification Under Completelyassembled, Grease Filled Condition With Bearings,Plummer Blocks, Fixingbolts, Nuts And Washers , Spares , Spare Drive Pulleys Of 1400Mm Bw With 500Mm Pulley Diameter, 125Mm Shaft Diameter At Bearing For Bcn-1A/1B As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings , Plummer Blocks, Fixingbolts, Nuts And Washers , Spare Drive Pulleys Of 1400Mm Bw With 800Mm Pulley Diameter, 150Mm Shaft Diameter At Bearing For Bcn-3A/3B/4A As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings , Plummer Blocks, Fixingbolts, Nuts And Washers , Spare Drive Pulleys Of 1800Mm Bw With 500Mm Pulley Diameter, 125Mm Shaft Diameter At Bearing For Bfd-1/3 As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings , Plummer Blocks, Fixingbolts, Nuts And Washers , Spare Non Magnetic Drive Pulleys Of 1400Mm Bw With 800Mm Pulley Diameter, 200Mm Shaft Diameter At Bearing For Bcn-2A/2B As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings, Plummer Blocks,Locking Assembly And Plummer Blocks , Spare Bend And Snubpulleys Of 1400Mm Bw With 315Mm Pulley Diameter, 90Mm Shaft Diameter At Bearing For Bcn-1A/1B As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings, Plummer Blocks,Fixingbolts, Nuts And Washers , Spare Bend And Snubpulleys Of 1400Mm Bw With 500Mm Pulley Diameter, 150Mm Shaft Diameter At Bearing For Bcn-2A/2B As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings, Plummer Blocks,Fixingbolts, Nuts And Washers , Bend And Snubpulleys Of 1400Mm Bw With 500Mm Pulley Diameter, 125Mm Shaft Diameter At Bearing For Bcn-3A/3B/4A As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings, Plummer Blocks,Fixingbolts, Nuts And Washers , Spare Snubpulleys Of 1800Mm Bw With 315Mm Pulley Diameter, 90Mm Shaft Diameter At Bearing For Bfd-1/3 As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings, Plummer Blocks, Fixingbolts, Nuts And Washers , Spare Tail & Take Uppulleys Of 1400Mm Bw With 400Mm Pulley Diameter, 100Mm Shaft Diameter At Bearing For Bcn-1A/1B As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings , Plummer Blocks, Fixingbolts, Nuts And Washers , Spare Tail & Take Uppulleys Of 1400Mm Bw With 630Mm Pulley Diameter, 170Mm Shaft Diameter At Bearing For Bcn-2A/2B As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearingsfixingbolts, Nuts And Washers , Spare Tail & Take Uppulleys Of 1400Mm Bw With 630Mm Pulley Diameter, 125Mm Shaft Diameter At Bearing For Bcn-3A/3B As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings, Plummer Blocks,Fixingbolts, Nuts And Washers , Spare Tail & Take Uppulleys Of 1400Mm Bw With 630Mm Pulley Diameter, 100Mm Shaft Diameter At Bearing For Bcn-4A As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings, Plummer Blocks,Fixingbolts, Nuts And Washers , Spare Tail Pulleys Of 1800Mm Bw With 400Mm Pulley Diameter, 100Mm Shaft Diameter At Bearing For Bfd-1/3 As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings, Plummer Blocks,Fixingbolts, Nuts And Washers , Spare Non Magnetic Drive Pulleyof 1000Mm Bw With 630Mm Pulley Diameter, 150Mm Shaft Diameter At Bearing For Bcn-7A/7B As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings, Plummer Blocks,Locking Assembly ,Fixingbolts, Nuts And Washers , Spare Drive Pulleyof 1000Mm Bw With 500Mm Pulley Diameter, 125Mm Shaft Diameter At Bearing For Bcn-5A/5B As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings, Plummer Blocksfixingbolts, Nuts And Washers , Spare Snub And Bend Pulleyof 1000Mm Bw With 315Mm Pulley Diameter, 80Mm Shaft Diameter At Bearing For Bcn-5A/5B As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings , Plummer Blocks, Fixingbolts, Nuts And Washers , Spare Snub And Bend Pulleyof 1000Mm Bw With 400Mm Pulley Diameter, 90Mm Shaft Diameter At Bearing For Bcn-4B As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings, Plummer Blocks,Fixingbolts, Nuts And Washers , Spare Snub And Bend Pulleyof 1000Mm Bw With 400Mm Pulley Diameter, 110Mm Shaft Diameter At Bearing For Bcn-6A/B As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings, Plummer Blocks,Fixingbolts, Nuts And Washers , Spare Tripper Pulleyof 1000Mm Bw With 500Mm Pulley Diameter, 125Mm Shaft Diameter At Bearingas Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearingsfixingbolts, Nuts And Washers , Spare Tail/Take Up Pulleyof 1000Mm Bw With 500Mm Pulley Diameter, 110Mm Shaft Diameter At Bearing For Bcn-4B As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearingsfixingbolts, Nuts And Washers , Spare Tail/Take Up Pulleyof 1000Mm Bw With 400Mm Pulley Diameter, 110Mm Shaft Diameter At Bearing For Bcn-5A/B As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings , Plummer Blocks, Fixingbolts, Nuts And Washers , Spare Tail/Take Up Pulleyof 1000Mm Bw With 500Mm Pulley Diameter, 125Mm Shaft Diameter At Bearing For Bcn-6A/B As Elaborated In Annexure-A Of Technical Enquiry Specification Under Completely Lagged And Assembled, Grease Filled Condition With Bearings, Plummer Blocks,Fixingbolts, Nuts And Washers
