Bids Are invited for 15610030050_Comp. Drive shaftModel1612-04(20AT) - Dynamically balanced suitable drive shaft assembly having 4530mm OAL along with split taper bush (CI) with motor and gearbox end yokes (CI), HDG plated rubber bushes with required set -Odisha

Bids Are invited for 15610030050_Comp. Drive shaftModel1612-04(20AT) - Dynamically balanced suitable drive shaft assembly having 4530mm OAL along with split taper bush (CI) with motor and gearbox end yokes (CI), HDG plated rubber bushes with required set screws and cap screws etc for cooling tower model no-1612-04(20AT) for series-351, class-1 (HDG Steel).NOTE:-DYNAMIC BALANCING CERTIFICATE IS TO BE FURNISHED ALONG WITH SUPPLY. THE DRIVE SHAFT IS TO BE SUPPLIED ALONG WITH NBM INSERT, MACHINE BOLT, NUT AND LOCK WASHER AND REQUIRED HARDWARE FOR THE DRIVE SHAFT-HDG STEEL. , 15610021000_Motor endYoke assy for CT 1612-04 DE - Yoke assy. 351 75MM SGHDG-HW-EG(Motor end yoke assy. with split tappered bushing, cap screw, lock washer, set screws with inserts for 351 class-1 driveshaft) , 15610021010_Gearbox endYoke assy for CT 1612-04 DE - Yoke assy 351 2.3/81N SGHDG HW-MS-EG(Gearbox end yoke assy. with split tapered bushing, cap screws, lock washers, set screws with inserts for 351 class-1 driveshaft) , 15610004500_Weldment for CT Gearbox Series32 14.54:1 - GRDR WELDMENT ASSEMBLY SR32.2 P91-3068-1 with ANCHOR BOLTM24X225 P80-136-03 MS HDG (10Nos.), HEX NUT M24-3.0MSHDG (20Nos.), WASHER LOCK M24 MS EG (20 Nos.) , 15610030350_DYNAMIC.BALANCED DRIVE SHAFT HDG STEEL - COMPLETE SET OF DYNAMICALLY BALANCED SUITABLE DRIVE SHAFT ASSEMBLY. SPLIT TAPER BUSH WITH MOTOR END YOKE AND GEAR BOX END YOKE ASSEMBLY,RUBBER BUSHES WITH REQUIRED SET SCREWS AND CAPSCREWS ETC FOR COOLING TOWER -2 MODEL: 652-3-03 GEAR BOX MODEL: 32.2, GEAR RATIO: 8.80:1 DYNAMICALLY BALANCED CERTIFICATE IS TO BE FURNISHED ALONG WITH SUPPLY. , 15610101010_VALVE STEM+KEY WASHER-10 P/N.1.3 - VALVE STEM WITH GUIDE, KEY, WASHER, CASTLE NUT, GASKE,SEAL, GREASE NIPPLE, LOCKING BAR, COTTER PIN, ORINGWITH LOCK PLATE, OPERATING BAR WITH KEY AND SET SCREWS FOR 10 INCH DISTRIBUTION VALVE,CT-II , 15610102060_COMPLETE VALVE ASSY 10 PT.NO. 1.0 - DISTRIBUTION VALVE COMPLETE ASSEMBLY WITH VALVE BODY GASKET AND MOUNTING BOLTS AND NU

Refer document

Refer document

Refer document