|
| 1 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 5m as directed. |
| 2 | Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof.as directed within a lead of 75 m. includingstacking of steel bars. |
| 3 | Single brick flat soling of Picked Jhama Bricks including ramming and dressing the bed to Proper level and filling joints with powdered earth or local sand. |
| 4 | Cement Concrete with 30mm down graded Shingles excluding shuttering (1:3:6)in foundation : |
| 5 | Ordinary cement concrete ( mix 1:1.5:3) with graded stone chips (20mm down excluding shuttering and reinforcement,if any in ground floor. As per relevent I.S. Codes. |
| 6 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at inter-section, complete as per drawing and direction. |
| 7 | Hire and labour charge for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, columns, lintels curved or staight including fitting fixing and striking out after complection of works. (up to 1st floor)A) 25 mm. to 30 mm. thick wooden shuttering without staging in foundation. |
| 8 | B) 25 mm. to 30 mm. thick wooden shuttering as per decission & direction of E-I-C. at ground / 1st floor. |
| 9 | 125 mm. thick brick work with 1st class bricks in cement mortar (4:1) in Ground floor. |
| 10 | Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor).ii) with 4:1 cement mortari) 15 mm. thickplaster - Lum Sum ( Details in bill ) |
| 11 | Artificial stone in floor,dado, staircase etc. with cement conctrete (4:2:1) with stone chips laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (2:1) including smooth finishing and rounding off corners and including application of cement slurry before flooring works, using cement @ 1.75 kg./sq.m. all complete including all materials and labour.In ground floor.3 mm. thick topping (High polishing grinding on this item is not permitted) with ordinary cement.In 1st floor.20 mm. Thick |
| 12 | Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc. |
| 13 | (a) M.S. orW.I. ornamental grill of approved design joints continuously welded with M.S., W.I. flats and bars for windows ,railing etc. fitted and fixed with necessary screws and lugs in 1st floor.Grill weighing above 10 kg./sq.m.and upto 16 kg / sq.m. |
| 14 | M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete |
| 15 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer\"s specification:b) Two coats |
| 16 | White washing including cleaning and smoothing surface throughly .........Two Caots |
| 17 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sandparpering etc. including using of approved putty etc. on the surface, if necessary.On timber surfaceiv) Two coats(with any shade except white) ) Lum sum ( Details in bill ) |
| 18 | (b) On steel or other metal surface:iv) Two coats(with any shade except white) - Lum sum ( Details in bill ) |
| 19 | Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor)a) With 0.60 mm thick sheet |
| 20 | Galvanised Iron sheet ridging fitted with necessarybolts screws,, washers, etc complete (225 mm end lapping)300 mm. lapping each waya) With 0.60 mm thick sheet |
| 21 | Taking out carefully GCI or CI or Asbestos sheets (including Ridges etc.) from roof or wall after unscrewing bolts nuts screws etc. and stacking the materials at site as directed. |
| 22 | Surface dressing of the Ground in any kind of soil........ |
| 23 | Repairing of Electrical Works....... |
| 24 | Repairing of S & P Work.... |
| 25 | Repairing of Table & Bench Work.... |
| 26 | Supplying fitting and fixing of Signboard and cost of photograph (payment will be made as per voucher) |
| 27 | ADD GST 12 % |
| 28 | Add Cess 1 % |
