|
| 1 | OVER HEAD TANK WORKS 100 Kl 18 m. Staging |
| 2 | Design and Construction of RCC O.H.T of 100 Kl capacity (in Kiloliters) and 12 m. Staging with 1.00m wide RCC staircase from G.L. to balcony and from balcony to Top Dome 1m x 1m RCC landing at suitable locations and railed with 3 rows of 25mmdia. G.I. (M) pipe on 65x65x5mm angle iron posts fixed with ladder, top to the floor inside of the tank. M.S. M.H. cover with loacking arrangement, lightning conductor as per electricity rules, water level indicator, supply and fixing of outlet, inlet, overflow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body, vertical pipe, ladder M.S M.H. cover , ventilator column etc. complete with approved water proofing ( apex)/ enamal paint, testing, filling water for testing purpose etc. including supply of vertical pipes and specials assuming bearing capacity as 8MT/M2 staging 12.00 meter |
| 3 | Additional rates for staging per meter height beyond 12 m height including cost of all material, labour, shuttering, scaffolding T&P complete for capacity (in kiloliters) Over Head Tank. (Extra 6 M. Height) |
| 4 | Construction of masonry type chamber for sluice value Size as per type design. |
| 5 | PUMP HOUSE WITH ATTENDANT ROOM |
| 6 | Supply of all Materials, Labours, T&P etc.and Construct a Pump House With Size (3.50 m x 4.50m) along with Attendant Room with size (3.00 m x 3.50m) , kitchen and W.C. as per Designand Drawings, all complete. |
| 7 | RISING MAIN |
| 8 | Providing of all materials, carting from site store to site of work, Lowering into trenches with true alignment, Laying & Jointing of full length S&S Centrifugally Cast (Spun) / Ductile Iron Pipes including supply of \"\"EPDM\" rubber gaskets conforming to IS : 5382-1985 with testing of pipe line complete.DI K-9 pipe confirming to IS:8329/2000 : 100 mm dia |
| 9 | Providing push-on-joints to Centrifugally (spun) cast Iron pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket: 100mm dia |
| 10 | Providingand laying D.I. specials of class K-12 suitable for push-on jointing as per IS: 9523-2000Upto 600 mm dia |
| 11 | Excavation in Ordinary Soil (loams, clay, sand) for foundation including lift up to 1.5 m and lead up to 30 m filling, watering and ramming of Excavated the earth into the trenches or into the sides between foundation trenches or into the plinth and removal.(20 X 0.70 X 1.10) |
| 12 | E & M Works |
| 13 | Construction of 1No. 200mm dia, 150Mt. deep Tubewell. |
| 14 | Drilling Work |
| 15 | Transportation of Rig machine, Air compressor O.P. unit and T & P and other equipments up to site including loadinng unloading etc complete in all respect.-1 Job.,Installation and leveling of Rig machine, at site of work. - 1 Job, Drilling 450mm dia size final bore from G.L. to required depth . - 150Mts., Collection of strata sample in box.-1 Job, Dismantling of Rig machine after completion of work. Fitting of girder and clamp, well cap.- 1Job, Arrangement of water. -1 Job.,Geophysical logging of bore well- 1Job., Preparing and Lowering of tube well assemblyG.L. to 150MBGL.-1 Job, Pea-Gravel Feeding from 150MBGL to G.L. .-1 Job , Fitting of girder, clamp and well cap.- 1Job, |
| 16 | Supply & lowering of Tubewell assembly. |
| 17 | 200mm dia mini. 8.0 mm thick M.S.E.R.W. plain pipe. |
| 18 | 200mm dia mini. 8.0mm thick M.S.E.R.W. Slotted pipe. |
| 19 | 200x100mm dia sizeM.S Girder 4Mt.Long forT.W. assembly. |
| 20 | 200mm dia Bail plug with hook. |
| 21 | M.S. heavy duty D.E clamp suitable for 200mm dia. |
| 22 | 200mm dia well cap. |
| 23 | Supply and shrouding of Pea-Gravel 3.00mm to 4.00 mm upto 150Mt.MBGL |
| 24 | Development of Tubewell by 350 PSI/1100CFM air comperssor. |
| 25 | Development by Air compressor including erection of Air compressor unit and dismantling after work as per specification. |
| 26 | Development of Tubewell by O.P. unit of suitable capacity. |
| 27 | Development by O.P unit to get sand free discharge of 500 LPM including erection of O.P. Unit and dismantling after work as per specification. |
| 28 | Geohydrologgical survey of site |
| 29 | Chemical & Bacteriological Test of water |
| 30 | S.I.T.C. of Submersible Pumping Plant with Accessories for Proposed Tubewell |
| 31 | Supply of Submersible pump and motor set: 400 L.P.M. discharge at 65 mts. NEH. |
| 32 | Supply of Submersible pump and motor set:400 L.P.M. discharge at 65 mts. NEH. as spare. |
| 33 | Supply ofFully automatic start delta Starter cum panel of 10 HP as per spacification and site Requirment. |
| 34 | Supply ofMainpiping andvalvesas per specification and site Requirment |
| 35 | Supply ofof 6 sq.mm. 3 core Copper conductor P.V.C. insulated submersible cable |
| 36 | Supply of20 KVA automatic voltage regulator (compact) servo controlled stabilizer with accessoriesas per specification and site Requirment |
| 37 | Supply of chain pulley 2 tonne capacity with 4.5mt.lift . |
| 38 | Supply of Electronic type liquid chlorine dosing system |
| 39 | Supply of Chlorine Testing Kit |
| 40 | Supply of Liquid Chlorine (50 Kg Cane) |
| 41 | Supplyof Gauges as per specification |
| 42 | Supply of Earthing materialsas per specification and site Requirment |
| 43 | Supply of Rubber Insulation sheet 1mt. x 2mt.x 0.025 mtr. |
| 44 | Supply of 63 Amp. TPN Main Switch |
| 45 | Intelligent GSM based Mini Remote Terminal Units/PLC with analog and digital parameters and features as specified mini T.W. and transmit data on GSM backbone. GSM based wireless Communication system capable to transfer and gather data from remote sites to master Control Stations (Voltage, Current, Power factor,Pumping running Hour etc.) with 6 Amp. Automatic Voltage stabilizer including high and low cut and isolation transformer including erection, testing & commissioning complete in all respect. |
| 46 | Tools and Spanners – |
| 47 | Installation, commissioning and Testing of all pumping plant & Accessoriees complete |
| 48 | Internal & External Electrification of pump house for Proposed Tubewell |
| 49 | Wiring for light point/fan point, exhaust fan point, call bell point with15.sq.mm FRLS PVC insulated copper conductor single core cable in surface, recessed medium class PVC conduit , with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc, as reuired. |
| 50 | Wiring for circutit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. |
| 51 | 2x2.5 sq. mm +1x2.5sq.mm earth wire |
| 52 | 2x4 sq. mm +1x4sq.mm earth wire |
| 53 | supplying and fixing following piano type switch/scoket on the existing switch box/cover including connections etc. as required. |
| 54 | 5/6amps switch |
| 55 | 3pin 5/6 amp socket outlet |
| 56 | supplying and fixing metal box of 150mm x75mm x60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front incuding providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required. |
| 57 | supplying and fixing metal box of 180mm x100mm x60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front incuding providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required. |
| 58 | S/F 3 pin , 5 amp celling rose on the exting junction box/wooden block including connection etc, as required. |
| 59 | S/F brss batten, angle holder including connction etc, as requird. |
| 60 | supplying and fixing 6 way Double door, single pole and neutral, sheet steel, MCB distribuiton board, 240v, on surface/recess, complete with tinned copper bus bar , neutral bus bar, earth bas, din bar, interconnections, power painted indulding earthing etc. as required (But without MCB/RCCB/Isolator) |
| 61 | S/F 5 amps to 32amps rating, 240/415 volts, \"C\" curve, mainature circuit braker suitable for inductive load of follwing poles in the existing MCBDB compete with connection, testing and commissioning etc. as required. |
| 62 | Single Pole |
| 63 | Double Pole |
| 64 | S/F Security light LED Type, 40 watts with bracket, clamp, connection etc compete in all respect |
| 65 | S/F 23 watts CFL |
| 66 | S/F of LED T_5, 18 watts tubelight fitting connection etc, compleat in all respect |
| 67 | S/F of exhaust fan (i.s.i mark) with jali, 450mm sweep, including making hole for exhaust fan and connection etc, complete in all respect. |
| 68 | One month TrialRunning & Five month operation, Maintenance including watch & ward. |
