Military Engineer Services-MES has published Special Repair To Bk No 15 And Addn Altn To Bldg No 7 At Ponda And Provn Of Wash Baisin And Air Circulator Turbo Ventilators In Bldg No T 66 At Madgao Under Ge Panaji Goa. Submission Date for this Tender is 20-01-2022. Building Work Tenders in GE PANAJI Goa. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 13-Jan-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-01-2022 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | Material & Labour 75mm thick plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate, finishing the surface even and fair as in plinth protection and similar work complete all as specified and directed. |
| 3 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 4 | Material & Labour Reinforced cement concrete (nominal mix) Type B0 1:2:4 (12.5mm graded aggregate)in beams cantilevers, bressummers and lintel over 1.5 mtr span and the like complete all as specified and directed. |
| 5 | Taking down chowkat/frame with shutters n exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified and directed. |
| 6 | All as in item No. 5 above but exc 1.5 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 7 | Material & Labour 2nd class hard wood for Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 8 | Supply & Fix 2nd class hardwood 35mm thick glazed and skeleton shutters(Factory made), open rebated and prepared to receive glass, gauze etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.(Sizes of members of shuttersas specified in SSR Pt-I Section 8, complete all as specified and directed. |
| 9 | Supply & Fix35mm thick (Factory made) 2nd class hardwoodplain framed, panelled shutter (two or three panel) with lock rail and panel of 9 mm BWP commercial ply or 12mm veneered particle board with commercial veneering onobth faces. The size of rail and stileas per IS 1003 (Part -I) kilnseasoned and chemically pressure treated complete all as specified and directed. |
| 10 | Supply and fix solid PVC door frames of size 50mm x 47 mm made out of 5 mm thick plain/printed coloured PVC sheet reinforced with MS square tube all as per specification & drg in SSR Pt II complete all as specified and directed. |
| 11 | Supply and fix factory made solid panel PVC door shutter 30mm thick (styles) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC"C" Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitten in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading & jointed together with solvent cement, complete all as specified and shown in drgs in SSR Pt II complete all as specified and directed. |
| 12 | Supply & Fix aluminium powder coated barrel tower bolts of extruded section 150 mm long complete all as specified and directed. |
| 13 | Supply & Fix Aluminium alloy powder coated sliding door bolt 300 mm long with hasp & staple (bolt type) and fixing clips of sheet cast of extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloycomplete all as specified and directed. |
| 14 | Supply & Fix 100mm long stainless steel butt hinges complete all as specified and directed. |
| 15 | Supply & Fix extruded aluminium anodised, fabricaated type handle, 150mm long complete all as specified and directed. |
| 16 | All as per item No.15 above but 100mm long |
| 17 | Material & Labour for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 18 | Supply and fix mild steel work as in bands, straps, clamps, hold fast, etcand similar small articles conforming to Fe.290, Gde E-165 complete all as specified and directed. . |
| 19 | Supply and fix aluminum anodized door shutter including frame and sliding window having three track two carries glass shutter and one carries mosqueto net shutter, any type (sliding or open-able ) with frame , & ventilators, other similar work etc including necessary arrangement for sliding and locking & to receive 4mm thick sheet glass or wire mesh with aluminium channel beading & stainless steel screws including the cost of rubber gasket / rubber beading and all necessary fitting like mortice lock, aluminium tower bolt, handle, stopper, hinges etc complete . But the weight of the rubber gasket / beading will not be measured with weight of aluminium shuttercomplete all as specified and directed . Note :- (a)Sheet glass & wire mesh shall be measured & paid separately. (b) Weight of aluminium shall be measued exclusive of all fittings feature hinges, handle bolts and locking arrangement. |
| 20 | Supply & Fix aluminum alloy wire mesh 0.45 mm nominal dia of wire and avge widthof aperture 1.4mm cut to size and fixed to doors/window shutters and fixed with aluminium wire stapels complete all as specified and directed. |
| 21 | Supply & Fix sheet glass ordinary quality, 4mm thick and glazing with oil putty/wooden beads in squaresexceeding 0.50 sqm each. Complete all as specified and as directed. |
| 22 | All as per item No. 21 above butwith pin headed/figured glass nexceeding 0.50 sqm each complete all as specified and directed. |
| 23 | Material & Labour for framedwork as in grills, gratingsand in similar work as portions of gates etc including pintle hinges, stops, sliding bolts etc complete all as specified and directed. |
| 24 | Material & Labourforming jambs etc to openings for door and window opening including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work complete in cement mortar 1:6 complete all as specified and directed. |
| 25 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) and disposing off the rubbish material complete all as specified and directed. |
| 26 | Material & Labour for non skid coloured ceramic tile 7 to 8mm thick (square/rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cemrnt to match complete all as specified and directed. |
| 27 | All as per item No.26 above butas in vertical surfaces |
| 28 | Material & Labour for non skid coloured ceramic tile 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cemrnt to match complete all as specified and directed. |
| 29 | Supply & Fix glazed ceramic tiles 300 x 200 x 7mm thick coloured on vertical surfaces such as dado skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 30 | Material & Labour Chequered cement concrete tiles 20cm x 20cm x 25mm thick set jointed & pointed in neat cement slurry in floor with grey cement and pigment complete all as specified and directed. |
| 31 | Material & Labour for rendering 10mm thick on brick orconcrete surfaceinCM 1:4 finished even and fair to received glazed tiles complete all as specified and directed. |
| 32 | Material & Labour for screed bed or bedding layer of cement mortar 1:6, 20mm thick for receive floor finish complete all as specified and directed. |
| 33 | Taking down cement plaster of any description from brick or stone walls including racking ouit joint hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 34 | Material & Labour apply one layer of concrete 20mm thick comprises composition 50 Kg cement, 3 to 6mm chips 100kg, 7 sand 50 Kg mixed with spray set SL 2 to 2.5% by weight of cement and 12.5 to 16.5 ltrs of water mixed with admixture incl bonding agent & applying rust remover and guniting with pressure nozzle with a delivery capacity of 2.5 Kg/Sqm complete all as specified and directed. |
| 35 | Material & Labour rendering the entire gunniting surface with 10mm thick in cement mortar 1:4, finished the surface even & smooth without using extra cement complete all as specified and directed. |
| 36 | Supply only welded steel wire fabric weight n.exc 4 kg/sqm complete all as specified and directed. |
| 37 | Material & Labour for 15mm thick rendering in CM 1:6 on brick or concrete surfaces of wall , finished even and smooth without usng extra cement. |
| 38 | Material & Labour for applying two coat of oil emulsion distemper over a coat of chalk whiting as preparatoy to distemper including prepration of new surface or unplastered surfaces of wall with applying 3mm thick wall care putty complete all as specified and directed. |
| 39 | Material & Labour for applying two coat of oil emulsion distemper over a coat of chalk whiting as preparatoy to distemper including prepration of old decorated surfaces of wall with applying 3mm thick wall care putty by complete removal of existing treatment complete all as specified and directed. |
| 40 | Material and labourfor rendering 15mm thick plaster in cement mortar 1:4 on external surfaces such as stone or concrete surfaces with using water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. (Water proofing compound shall be measured and paid for separately) |
| 41 | Material and labour for applying two coats of weather proof acrylic emulsion paint over a coat of weather proof acrylic emulsion exterior primer including preparation of new surfaces of walls complete all as specified and directed by Engr-in-charge. |
| 42 | Material and labour for applying two coats of weather proof acrylic emulsion exterior paint over a coat of weather proof acrylic emulsion exterior primer including complete removal of existing treatment old wall surfaces or preparation of old plastered /concretesurfaces of walls, etc. complete all as specified and directed. |
| 43 | Supply only liquidwater proofing compound complete all as specified and directed. |
| 44 | Taking down PVC (SWR) pipes 75/110 mm bore from walls complete all as specified and directed. |
| 45 | Supply & Fix UPVC pipe, 75mm bore, single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 46 | Supply & Fix UPVC (SWR) pipe 110 mm bore,single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 47 | Supply & Fix UPVC (SWR) bends 75mm bore any radius dismantling pieces or tapers complete all as specified and directed. |
| 48 | All as per ser item No 47 above but 110mm bore |
| 49 | Supply & Fix UPVC (SWR) branch piece, single, (single Y) equal or unequal with access door, for 75mm bore pipes complete all as specified and directed. |
| 50 | Supply & Fix UPVC (SWR) branch piece, single, (single Y) equal or unequal with access door, for 110mm bore pipes complete all as specified and directed. |
| 51 | Supply & Fix UPVC (SWR) branch piece,double, (double Y) equal or unequal with access door, for 75mm bore pipes complete all as specified and directed. |
| 52 | Supply & Fix UPVC (SWR) branch piece,double, (double Y) equal or unequal with access door, for 110mm bore pipes complete all as specified and directed. |
| 53 | Supply and Fix UPVC (SWR) gully trap 125/110 mm setting and jointing with solventcement complete all as specified and directed. |
| 54 | Supply & Fix Nahani traps 75mm dia with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed. |
| 55 | Supply & Fix in repairs Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Including of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed. |
| 56 | Supply & Fix PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 57 | S&F towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and plstic cleats complete all as specified and directed. |
| 58 | Material & Labour waste coupling 32 mm dia (PTMT) fixed in repairs for glazed ware sinks, basins etc half or full threaded with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed for 32 mm bore complete all as specified and directed. |
| 59 | Supply and fix in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 60 | Taking up or down steel water tubing 15mm bore and connections, including fitting complete all as specified and directed. |
| 61 | All as in item No 60 above, but 20mm bore pipe. |
| 62 | Supplying & laying CPVC water tubing outer dia 20mm, SDR-11 grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 63 | All as in item No. 62 above, but 25mm bore pipe. |
| 64 | Supply and Fix in repairs chromium plated bib taps cast copper alloy, fancy type CP with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferule and fixed of size 15mm bore complete all as specified and directed. |
| 65 | Supply & Fix in repair Pillar taps, 15mm dia fancy typecast copper alloy, with capstan heads, chromium plated, screwed down high pressure, without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 66 | Supply and fix in repairs, chromium plated 15mm borestop valves, cast copper alloy 15 mm bore fancy type CP screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete complete all as specified and directed. |
| 67 | Supply and fix in repairs PVC flushing cistern 10 ltr capacity low/ high level with inlet ball valve and handle including brackets and flush pipe 32mm dia PVC for low/ high level PVC flushing tank complete all as specified and directed. |
| 68 | Supply & Fix in repairs Brass chromium plated shower rose 125mm size shower roses with or without swivel joints, any size, including fixing to steel pipe or union shower roses complete all as specified and directed. |
| 69 | Supply & Fix rotational moulded polythylene water storage tank of 2000 liters capacity (cylindrical vertical with closed top) hoisted and fixed in position including disconnecting the old tank all as specified in SSR Part -I complete all as specified and directed. |
| 70 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 71 | Dismantling structural steel work of any description not otherwise provided for complete all as specified and directed. |
| 72 | Excavating in post holes (or similar holes) each n exc 0.5 cum in soft/loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surfaceall as directed |
| 73 | Material & Labour cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete all as directed. |
| 74 | Supply & Fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having Tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 75 | Ditto all as item 74 above but plain steel sheet 0.50 mm thick. |
| 76 | Material & Labour 5mm thick PVC plain sheet as in eaves boards fixed with and including screws and iron frame work complete all as specified and as directed. (Note:- iron work shall be measured and paid saperately) Make :-Armstrong, Neelkamal, M/s Marblex tiles, Polyfin Tiles |
| 77 | Supply & Fix steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc conforming to Fe 410-W(Gde-E-250 quality "A") complete all as specified and directed. |
| 78 | Supply & Fix steel in rolled sections as in main and cross beam hips and jack rafters, purlins where connected to common rafters and running rail and guide for sliding doors fixed with angle cleats etc conforming toFe 290 (Gde-E-165) complete all as specified and directed. |
| 79 | Supply & Fix steel in compound girders and stanchions lattice girders aerial masts, staging for water tank and like including cap and bases , splices etc built up from two or more beam or channel section or angle with plates including all lattice bars stifferners, gusset plate.etc conforming to Fe 290 (Gde-E-165) complete all as specified and directed. |
| 80 | Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description, over 10cm in width or girthcomplete all as specified and directed. |
| 81 | Dismantling of ceiling boards of any description and at any position (fiber, pulp, insulation, etc) or insulation boards/ slabs/ blankets any thickness, including cover fillets andgrid frame work all as complete all as specified and directed. |
| 82 | Supply and fix anodized aluminium snap grid frame work for false ceiling of grid size 605mm x 605mm with size of main tee 35mm x 25mm x 1.5mm and cross tee 25mm x 25mm x 1.5mm and supporting angle at the end all alonge the wall 40mm x 25mm x 2mm, hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified directed. |
| 83 | Material and labour for 6mm thick non asbestos fibre cement building boards fixed or laid/ inserted to aluminium frame work with screws complete all as specified and directed. |
| 84 | Dismantling of old ceiling boarding of any description, fixed in any position with screw and re-fixed in flat or sloping 6mm thick asbestos cement plain building boards fixed or laid/ inserted to timberframe or iron frame work with screws, hooks, belding, cliping etc complete all as specified and as directed. |
| 85 | Supply and fix in repais vitreous china squatting pan "Orissa" pattern, of size 580mmx440mm white with integral foot rest with and including"P" or "S" trap, connection to trap and to flushing pipe, trap set in and including provision of lime concrete bedding and taking out old WC and connections etc complete all as specified and as directed |
| 86 | Demolition of brick work or stone/boulder masonary, built in cement mortar including all quoins,arches,pillars,etc. complete all as specified and directed by Engineer in charge. |
| 87 | Material & Labour for walling laterite of squared rubble, regular coursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed by Engineer in charge. (Note -The rate consider is for laterite stone only as per section No.6 stone masnory para - 6.2.4 of SSR 2020) |
| 88 | Material & Labour for 15mm thick plastering in CM 1:4 on external surfacesstone or concrete surfaces at any heightfinished even and smooth without using extra cement complete all as specified and directed. |
| 89 | Extra over stone walling for hammer dressing to face stone and dressing of face beds and joints, as specified, ofsquared rubble masonry regular coursed, hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 20mm complete all as specifed and directed. |
| 90 | Supply & Fix curtain rails 19mm dia stainless steel with brackets stops rollers etc fixed in repairs complete all as specified and directed. Note:- Bracket will be measured and paid separately. |
| 91 | Supply & Fix brackets for curtain rail fixed in repair complete all as specified and directed. |
| 92 | Supply and fixing of soap dish vitreous china coloured approximate size (160mmx160mmx90mm) fixed in repairs and fixed to pluge with cromium plated brass screws complete all as specified and directed. |
| 93 | Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundation, etc or for laying of pipes cables wells cesspits, manholes, pier holes, etc. not exceeding 10sqm on plan and not exceeding 1.5m depth and getting out in hard/dense soil complete all as specified and directed |
| 94 | Demolition and breaking up 100/110mm dia drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed |
| 95 | All as per item no 94 above but 200 mm dia drain pipes |
| 96 | Material and labour for pre-cast reinforced cement concrete 1:3:6 type C-1 (20mm graded crushed stone aggregate) as incover slab for manholes in any position and set in cement morter 1:4 including necessary form work complete all as specified and as directed |
| 97 | Material and labour for concrete bed to drain pipes of 100mm dia in cement concrete 1:4:8 type D2 (using 40mm graded crushed stone aggregate) including packing under and hunching against the sides of pipes after they are laid and tested complete all as specified and directed |
| 98 | All as per item No 97 above but bore of pipe 200mm dia |
| 99 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in hard/danse soil complete all as specified and as directed |
| 100 | Removing excavated surplus spoil not exceding 50m and depositing where directed at a level not exceeding 1.5mabove the starting point complete all as specified and as directed |
| 101 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed. |
| 102 | Material and labour for applying two coat of cement base paint over a coat of alkali resistant priming paintprimer including preparation of new plastered surfaces of wall complete all as specified and directed. |
| 103 | Material and labour for applying two coat of cement based paint over a coat of alkaliresistant priming paint primer including preparation of surface by Washing, rubbing down and stopping of distempered old painted surfaces of walls complete all as specified and directed by Engr-in-charge. |
| 104 | Material & Labour for applying two coat of oil emulsion distemper over a coat of primer including prepration of new surfaces of wall with applying 3mm thick wall care putty complete all as specified and as directed. |
| 105 | Supply only integral water proofing compound (ISI Mark) complete all as specified and as directed. |
| 106 | Supply & Fixed in repairs wash hand basin, white flat back size 550 x 400mm with and including 32mm brass chromium plated waste fittings (waste cuppling),waste pipe 32 mm dia, 75mm PVC(SWR) floor trap,brackets, grating square 150 mm size of PTMT, fency type 15mm dia pillar tap and 15mm bore dia fency stop valve, PVC connection 15mm size with PTMT nuts of length 450mm etc including cutting for and pinning in ends of brackets for erecting stand etc. complete all as specified and as directed. |
| 107 | Supply and fix 15mm bore galvanised iron steel water tubing of medium grade with and including all fittings including all pipe fittings such as bends, elbows, tees, unions, reducing tees, adaptors, sockets, plugs, hose clips, nipples, short lengths etc. as required at site, complete with saddles (snap clips), wall clips, hooks, protective mild steel tube sleeves and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 108 | All as per item No. 107 above but 20mm bore steel tubing. |
| 109 | Material & Labour for cutting of holes, square or circular exc. 400 but n.exc. 1000sq.cm in any of the corrugated sheet, etc complete all as specified and as directed. |
| 110 | Material & Labour for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous), etc to flat surface over 2nd class soft or hard wood fillets or cement/GI corrugated sheets,or metal frame work,etc complete all as spd and directed |
| 111 | Supply and Fix only for Air circulation Turbo Ventilators Roof mountain fan of 24" aluminium with polycarbonate base complete all as per manufactur"s instructions complete all as specified and as directed. Note : No any additional cost is provided to the contractor on this item if any requirement at site for fixing |
| 112 | Taking down carefully copper/ aluminium point wiring of light, fan socket 5/15A or power point complete including fittings such as switches, ceiling rose, pendant, regulator, socket, lamp holders, brackets, lamp fittings, tube light fittings etc including switch boards and making good distrubed surfaces of wall/ ceiling etc so as to match with the existing wall/ ceiling/ floors etc complete all as specified and as directed. |
| 113 | Taking down carefully sub main wiring including copper/aluminium/GI earth continuity conductor and making good disturbed surfaces any sizes complete all as specified and as directed. |
| 114 | Taking down MCB DBs with MCBs of any size and capacty alongwith teakwood boards, energy meter incl all fittings/furniturecarefully and making good disturbed surfaces of wall complete all as specified and directed. Note : Energy meter is the property of the department and will be kept in safe custody for re-fixing. |
| 115 | Material and labour for point wiringwith proper colour coding for one light point controlled by one switch complete with 1100Volts grade 1.50 Sqmm PVC insulated unsheathed multistranded FRLS grade copper conductor cable(Make: Anchor/ Havells/ Plaza/ Finolex/ Polycab) fixed/ drawn through and including heavy grade rigid PVC conduit 20mm or higher dia (Make: Prestoplast/ Pressfit/ Finolex/ Precision) as required at site, totally concealed in walls/ floors/ ceiling including all conduit accessories/ fitting/ junction box/ inspection covers etc of heavy grade, ISI marked and sunk terminal boxes of factory made 16 SWG pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk/ cup washers, for mounting switches, sockets, fan regulators etc. with and including one run of 1100Volts grade, 1.50 sqmm PVC insulated unsheathed multistranded FRLS grade copperconductor cable as earth continuity wireconnected to metallic bodies of luminaries/ Fans etc at one end and connecting to common earth at other end and carrying out IR test for each circuit including making good the disturbed surface by cement mortar 1:3 and matching/ finishing surfaces by distemper/ colour wash as per existing colour surfaces over plaster of peris/ putti complete all as specified and directed. |
| 116 | All as per ser item No 115 above but for oneceiling/exhaust fan, point controlled by one switch. |
| 117 | All as per ser item No 115 above but for one 5Amp independent socket point controlled by one switch. |
| 118 | All as per ser item No 115 above but for one 5A socket point controlled by one switch on same board |
| 119 | Material and labour for point wiring with proper colour coding for 15Amp independent socket point controlled by one switch complete with 1100Volts grade 2.50 Sqmm PVC insulated unsheathed multistranded FRLS grade copper conductor cable(Make: Anchor/ Havells/ Plaza/ Finolex/ Polycab) fixed/ drawn through and including heavy grade rigid PVC conduit 20mm or higher dia (Make: Prestoplast/ Pressfit/ Finolex/ Precision) as required at site, totally concealed in walls/ floors/ ceiling including all conduit accessories/ fitting/ junction box/ inspection covers etc of heavy grade, ISI marked and sunk terminal boxes of factory made 16 SWG pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk/ cup washers, for mounting switches, sockets etc. with and including one run of 1100Volts grade, 2.5 sqmm PVC insulated unsheathed multistranded FRLS grade copperconductor cable as earth continuity wireand connecting to common earth and carrying out IR test for each circuit including making good the disturbed surface by cement mortar 1:3 and matching/ finishing surfaces by distemper/ colour wash as per existing colour surfaces over plaster of peris/ putti complete all as specified and directed. |
| 120 | Material & Labour for switch Piano flush type single pole one way 5 Amps, 240 volts, white finish complete all as specified (Make : Anchor (Delux)/ Leader/ Bajaj) |
| 121 | Material & Labour for switchPianoflush type 15 Amps, 240 Volts single pole white finish complete all as specified. (Make : Anchor (Delux)/ Leader/ Bajaj). |
| 122 | Material & Labour for socket outlet 5 pin, 5 Amps flush type white finish complete all as specified. (Make : Anchor (Delux)/ Leader/ Bajaj). |
| 123 | Supply & Fix socket outlet 2 in 1, 3 pin, 5/15 A, flush type universal, 240 V white finish complete all as specified. (Make : Anchor (Delux)/ Leader/ Bajaj). |
| 124 | Supply & Fix electronic socket size, rotary, 5 speed step type regulator, 220-230 volt white finish complete all as specified Make: Crompton greaves/ Bajaj/ Anchor |
| 125 | Supply & Fix ceiling rose, surface backlite, 65 x 20 mm three terminal complete all as specifed and directed. Make: Anchor (Delux)/ Leader/ Bajaj |
| 126 | Supply & Fix lamp holder insulated body with back plate suitable for angle / batten fitting complete all as specifed and directed. Make: Anchor/ Leader/ Bajaj |
| 127 | Supply & Fix double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed. Make: Havells/ Schneider/ L&T |
| 128 | Supply and fixing amp rating 240V, 10KA "C"SP 6 To 32 amp curve miniature circuit breaker (MCB)and current carrying capacity in the MCB DB connected with suitable lugs complete with connection testing and commissioning. Make: Havells/ Schneider/ L&T |
| 129 | All as per Ser item No 128 above but SPN 16-32 Amps |
| 130 | Material & Labour sub main wiring with two single core PVC-FRLS insulated unsheathed stranded copper conductor cable of size 4 sqmm (Make: Havells/ Plaza/ Finolex/ Polycab) drawn through and including heavygrade rigid PVC conduit 20mm or higher dia(Make: Prestoplast/ Pressfit/ Finolex/ Precision) as required at site ,totally concealed in walls /floors/ceiling and surfaces on trusse by means of saddles & clips etc including all conduit accessoriesc /fiitting/junction box/inspection covers etc of heavy grade ,ISI markedwith 4 Sqmm PVC-FRLS insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified. Note : (i) Two single core cable and one run of earth copper conductor/Conduit, will be measured and paid as one unit length |
| 131 | Material and labour for earthingcomplete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25metre deep below natural ground level) with top edge of the plate not less than 1.5metre below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel connected to main switch board/ main DB’s/ earth test point with and including necessary excavation and earth work in any type of strata, PCC 1:3:6, type C1 in chamber wall with 50mm thick, RCC cover 1:2:4, type B0 duly reinforced with 6 mm diabar, @100mm both way with suitable lifting handle, charcoal dust and common salt mixed and packed in 150mm thick layer all around the earth plate, watering pipe of size 20mm dia medium grade, 0.63mm thick GI sheet funnel with wire mesh, GI protection pipe 15mm dia light grade up to 7.5m from electrode and engraving of earth marking on nearby structure/ building with cement motor 1:4 plate of size 200mm x 150mm x 15mm thick complete all as shown in electrical plate No. 5 of SSR Part-I complete all as specified and as directed. Note: - On testing if desired earth resistance is not obtained, the earthing will be redone at no extra cost. |
| 132 | Material & Labour for cutting / boring of PCC hard standing at a depth not more than 15 cm deep and 15 cm in breadth for passing earthing conductor and making good the disturbed surfaces with PCC (1:2:4) type B-0 or cement mortar (1:3) complete all as specified. |
| 133 | Supply and fixing of GI pipe light grade of size 15 mm bore for laying in trenches/floors or walls including allfittings for fixing complete as required and directed by Engineer-in-Charge. |
| 134 | Material & Labour for earth continuity conductor or main earthing lead 4 mm dia GI or steel wire fixed to wall on batten or recessed or buried in ground or drawn in conduit/pipe all as required at site complete all as specifed and directed. |
| 135 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make: Havells/ Bajaj/ Wipro |
| 136 | Material and labour for 20 W LED street/building light fitting energy saving and environmental friendly long life LEDlight made up of pressure versatiledie-cast aluminium housing with LED as lighting sourceof capacity 20 W LED 5700 K of make Havells LHEXAYP7PN6K020or equivalentmake in Crompton/Bajaj/Wipro complete all as specified and directed. |
| 137 | Material & Labour for bracket made out of GI pipe 25mm dia medium grade, 60cms long bent to shape with MS flat iron clamps made out of 40mmX 6mm thick FI nuts, bolts including taking down old unserviceable bracket complete all as directed by Engr-in-charge incl. taking down old unsv. |
| 138 | Material & labour for cutting chases,pinning in, and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed conduit wiring, etc and making good, cutting not exc 10cm girth on wall complete all as specifed and directed. |
| 139 | Supply and Fixing exhaust fan, double ball bearing, ISI marked, metal body 300 mm sweep, single phase, 230 Volt AC, with louvers, including three core flexible cable of required length of size 23/0.0076 from ceiling rose/ connector to fan terminalincluding nut, bolt fixed on wall and all other accessories required at site and necessary cutting on wall and making good as per the requirement all as specified and directed. Make : Bajaj / Havells /Usha |
| 140 | Disconnecting and taking down ceiling fan of any sweep any make from any position at site, transporting to MES store Yardand rehanging/ re-fixing/ placing fan at same location at site includingproviding nuts, bolts, locking bolts, blade"s screws, split pin, rubber real, PVC connector, washers, of suitable size etc as required and re-painting one coat of supper enameled white paint with spray painting technique complete all as directed. |
| 141 | Opening / dismantling of ceiling fans 48" sweep cutting and taking out old burnt/damaged winding/material by any means and M&L for re-winding the same with super enamelled copper wire of existing/same gauge including all insulating material all as required as per standard practice, varnishing the same and drying, cleaning fan recommended quality grease/oil, re-assembling including provision of suitable ball bearings, Bushes, Capacitors and other minor misc sparesrequired at site complete and connection with PVC copper twisted conductor three core of size 0.5 Sqmm of required length and testing complete all as specified and as directed. |
| 142 | Supply and fix GI pipe of 15mm dia of medium grade for hanging of ceiling fans and make necessary fixing arrangement with ceilng fan and MS clamps and all as directed by Engr in Charge. |
| 143 | Supply and fix LED bulb of 9/10 watt of Havells Cat Part No LHLDEUEBML8R009 OR equivalent make in Bajaj/Crompton Greaves/Philips all as specified and as directed. |
| 144 | Supply & Fix3 core flexible 0.75 sqmm copper wire including dismantling old unserviceable one as directed by engr-in-charge. Make: Plaza/ Finolex/ Polycab |
| 145 | Fixing only energy meter retrieved from Sr Item No 114 and along with supply and fix SMC box with hinge type fitting arrangement moulded in engineering plastic, suitable for single phase energy meter complete all as specified and directed. Make: HDL/ Havells/ Sintex |
| 146 | Supply, laying, connect and testing of cable XLPE Insulated screened,PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core including taking down old unserviceable service wire/cable of any size all as specified and directed. |
| 147 | Supply and Laying DWC HDPE pipe of outer dia of 50mm and inner dia 40mm polyethylene (PE) with smooth internal and profiled external surface for non-pressure for underground cable including bends complete all as specified and directed. Make: “Rex Polyextrusion Ltd” or equivalent as approved by GE in writing. |
| 148 | Supply and fix DWC HDPE coupler of dia of 50mm complete all as specified and directed. Make: “Rex Polyextrusion Ltd” or equivalent as approved by GE in writing. |
| 149 | Supply and fixing galvanised pipe light grade40 mm bore for passing of cable fixed to poles/walls/lay under floor complete with and including fittings as required compete all as specified and directed Engr-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
