Special Repairs To Bldg No Et-14 At Changasri And Other Sanctioned Works At Rangia And Changsari Military Station Under Ge Rangia Spl Repairs To Bldg No Et-14 At Changasri And Other Sanctioned Works At Rangia And Changsari Military Station Under Ge Rangi, Rangia And Changsari-Assam

TDR : 30392095

Tender Notice
Corrigendum Details
BOQ

Expired

Rangia And Changsari , Assam

Tender Brief : Corrigendum : Special Repairs To Bldg No Et-14 At Changasri And Other Sanctioned Works At Rangia And Changsari Military Station Under Ge Rangia Spl Repairs To Bldg No Et-14 At Changasri And Other Sanctioned Works At Rangia And Changsari Military Station Under Ge Rangi

Document Fees
₹ 500 /-

EMD
₹ 97000.0 /-

Tender Value
₹ 48.50 Lakhs /-

Submission Date
15-01-2022

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	08-01-2022	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	15-01-2022
2	29-12-2021	BOQ AMDT	BOQ	08-01-2022

Name of Work : SPL REPAIRS TO BLDG NO ET-14 AT CHANGASRI AND OTHER SANCTIONED WORKS AT RANGIA AND CHANGSARI MILITARY STATION UNDER GE RANGIA.

Sl. No.	Item Description
1	Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as per specified and as directed by Engineer-in-charge.
2	Excavation in trenches n.exc 1.5m wide and n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as per specified and as directed by Engineer-in-charge.
3	M&L for PCC (1:4:8) type D2 ( using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as per specified and as directed by Engineer-in-charge.
4	M&L for RCC type A-I (1:1.5:3) as in foundation beams; plinth beams; bases for columns, etc. complete all as per specified and as directed by Engineer-in-charge.
5	M&L for RCC 1:1.5:3 ( 20 mm graded agg) as in column,post etc.s complete all as specified and as directed by Engineer-in-charge.
6	M&L for RCC 1:1.5:3 ( 20 mm graded agg) as in roof slab supported on wall, beam, landing, desk slab etc. complete all as specified and as directed by Engineer-in-charge.
7	M&L for RCC type A-I (1:1.5:3) as in chajjas complete all as per specified and as directed by Engineer-in-charge.
8	M&L for Formwork to sides of concrete foundation, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter fair finished surface of concrete flat complete all as per specified and as directed by Engineer-in-charge.
9	M&L for form work for side of pillars, posts, columns & similar works vertical or batter complete all as specified and as directed by Engineer-in-charge.
10	M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., complete all as per specified and as directed by Engineer-in-charge.
11	Formwork to edge of concrete flats, breks in flooors, openings in concrete walls , floors and roofs and sides of RCC/PCC bands in walls, horizontal or loppin and similar work all exceeding 20 cm wide(Where RCC/PCC band in walls spanning and opening, complete all as per specified and as directed by Engineer-in-charge.
12	M&L for mild steel TMT bars 10 mm dia. and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as per specified and as directed by Engineer-in-charge.
13	M&L for mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality confirming to Fe-410-S 0r Fe-410-O, complete all as per specified and as directed by Engineer-in-charge.
14	M&L for brick work with sub class \"B\" bricks, straight or curved on plan exc. 6m mean radius in cement mortar 1:6, complete all as per specified and as directed by Engineer-in-charge.
15	M&L for brick work with sub-class `B\" old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-charge.
16	M&L for 10 mm thick rendering on fair faces of brick work or concrete block in cement mortar (1:6) and surface finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
17	M&L 5mm thick ceiling plaster in CM (1:3) finished even and smooth without using extra cement complete all as per specified and as directed by Engineer-in-charge.
18	M&L for sand filling under floors or in foundations spreading and levelling in layers not exc. 25 cm thick including watering and consolidation, complete all as per specified and as directed by Engineer-in-charge.
19	M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm gradedstone aggregate) in footpath/ hard standing/pavings/plinth protections, finished even and smooth without using extra cement complete all as per specified and as directed by Engineer-in-charge.
20	M&L for damp proof course to horizontal surfaces including necessary formwork in cement concrete (1:2:4) mix type B-0, 40mm thick complete all as per specified and as directed by Engineer-in-charge.
21	Supply and laying polythene film, 150 micron thick laid on a coat of bitumen primer @ 0.30 to 0.50 kg per sqm complete all as per specified and as directed by Engineer-in-charge.
22	M&L for 15 mm thick rendering on fair faces of brick work or one side of lathing in cement mortar (1:4), mixing with water proofing compound @2% by weight of cement consumed and surface finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.Note: WPC shall be measured and paid separately.
23	Supply only integral water proofing compound confirming to IS complete all as per specified and as directed by Engineer-in-charge.
24	M&L for 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes, complete all as specified and as directed by Engineer-in-charge.
25	M&L 10mm thick backing coat in CM 1:4 on brick or concrete surfaces for fixing of wall tiles as in dado / skirting, complete all as specified and as directed by Engineer-in-charge.
26	S&F coloured non-skid ceramic tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.11 sqm but notexceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as per specified and as directed by Engineer-in-charge.
27	M&L for Coloured Glazed ceramic tiles 350 x 450 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to stepsetc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match, complete all as per specified and as directed by Engineer-in-charge.
28	M&L for forming construction joint 30 mmdeep x 10 mm wide filled with sealing compound grade \"A\", complete all as specified and as directed by Engineer-in-charge.
29	M&L for preparing new plastered surfaces and applyingtwo coats of cement based paint on walls over a coat of alkali resistant primer, complete all as per specified and as directed by Engineer-in-charge.
30	M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-charge.
31	M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed by Engineer-in-charge.
32	M&L for steel ventilators with top hung shutter including hinges, steel peg stay, complete all as per specified and as directed by Engineer-in-charge.
33	S&F 3 mm thick sheet glass, ordinary quality in squares not exceeding 0.5 Sqm in each pane fixed with cut & mitred beads, complete all as specified and as directed by Engineer-in-charge.
34	M&L for preparation of new or previously untreated steel or iron surface of any description and applying two coats of synthetic enamel paint over a coat of red oxide, primer over 10cm width or girth complete all as specified and as directed by Engineer-in-charge.
35	Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. .frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,; Paneling of plain colour PVC sheet to be fitted in the M.S.frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as per specified and as directed by Engineer-in-charge.
36	S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube in opening complete all as per specified and as directed by Engineer-in-charge.
37	S & F Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size(flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand and waste coupling of size 32 mm and waste pipe 32 mm, etc.,complete all as per specified and as directed by Engineer-in-charge.
38	S & F 20 mm stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as per specified and as directed by Engineer-in-charge.
39	Supply and fix fancy type, CP, stop valves 15 mm, cast copper alloy, screwed dowd, high pressure with crutch or butterfly handle, swrewed both ends for iron or for unions and fixed complete all as specified and as directed by Engineer-in-charge.
40	S&F15 mm bore Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge.
41	S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position, complete all as per specified and as directed by Engineer-in-charge.
42	S&F 25 mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed by Engineer-in-charge.
43	S&F GI tube 15 mm bore medium grade with fittings and fixed complete to wall, ceiling or laid in floor complete all as specified and as directed by Engineer-in-charge.
44	S&F GI tube 20 mm bore medium grade with fittings and fixed complete to wall, ceiling or laid in floor complete all as specified and as directed by Engineer-in-charge.
45	S&F 100 mm long extruded Aluminium alloy handles, fabricated type, anodised, complete all as per specified and as directed by Engineer-in-charge.
46	S&F 100 mm long medium weight, cold rolled mild steel butt hinges, complete all as specified and as directed by Engineer-in-charge.
47	S&F110 mm dia bore PVC (SWR)bends, complete all as specified and as directed by Engineer-in-charge.
48	S&F 110 mm dia bore PVC (SWR) junction (single T) equal or un-equal, complete all as per specified and as directed by Engineer-in-charge.
49	S&F 75 mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors, complete all as per specified and as directed by Engineer-in-charge.
50	S&F 110 mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors, complete all as per specified and as directed by Engineer-in-charge.
51	S&F 75mm PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as per specified and as directed by Engineer-in-charge.
52	S&F PVC SWR vent cowl 75 mm bore complete all as specified and as directed by Engineer-in-charge.
53	S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cementcomplete all as specified and as directed by Engineer-in-charge.
54	S&F 15mm dia PVC connection pipe with PTMT nuts of length 450mm complete all as specified and as directed by Engineer-in-charge.
55	S&F 75mm PVC (SWR) floor trap with grating including jointing with solvent cement complete all as per specified and as directed by Engineer-in-charge.
56	S&F 32 mm High density polyethylene pipes (HDPE) of pressure rating 6 kgf/sqcm fixed to walls, ceilings or in floors etc. complete all as per specified and as directed by Engineer-in-charge.
57	S&F Vitreous China squatting pan \"Orissa\" patern size 580x440mm white with integral foot rest including connection to trap and to flushing pipe, anti-syphonage pipe, etc including \"P\" or \"S\" trap complete all as per specified and as directed by Engineer-in-charge.
58	S & F in repair Vitreous china urinal, bowl type flat back of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipecomplete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws complete all as per specified and as directed by Engineer-in-charge.
59	S & F Vitreous china urinal partition white of size 310x700 mm terminating about 40cm above floor line complete all as per specified and as directed by Engineer-in-charge.
60	S& F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms),complete all as per specified and as directed by Engineer-in-charge.
61	S&F PVC 10 ltr capacity low level flushing cistern white with inlet ball valve float and braket and 32 mm bore PVC flush pipe, complete all as per specified and as directed by Engineer-in-charge.
62	S & F brass chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges complete all as per specified and as directed by Engineer-in-charge.
63	M&L for precast cement concrete (1:2:4) type B1 (using 20 mm gradedcrushed stone aggregate) as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces set in cement mortar 1:4complete all as specified and as directed by Engineer-in-charge.
64	M&L for PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in drain/surface channel and similar work, complete all as per specified and as directed by Engineer-in-charge.
65	Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends complete all as specified and as directed by Engineer-in-charge.
66	M & L for Brickwork with sub-class \"B\" bricks in one brick thick honey comb walling, built in CM 1:6 complete all as specified and as directed by Engineer-in-charge.
67	M&L for Loose filling with aggregates (broken bricks) of gauge 80 to 150 mm in soakage pits, soakage wells, complete all as per specified and as directed by Engineer-in-charge.
68	S & F chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing tosteel pipe or union, complete all as per specified and as directed by Engineer-in-charge.
69	M&L for takingdownof existingroof treatmentfrom roof andfence and coveringsurfaceof oldconcreteroof by picking, sweeping clean and washing down withwater removedust,etc. and applyingroof treatementwith the followingspecifications: (a)Applying bitumineous primer @ 0.30 litre per Sqm of surface.(b)Applying coat of hot applied bitumen 85/25 @ 1.20 Kg/Sq m of surfaces. (c) Laying of APP Modified water proofing membrance with non-woven polyster Reinforcement on hot applied bitumen with 100mm over lap at joints by torching on the transverse direction and 75 mm on longitudinal directional all as per manufacturer\"s instructions.(d) Applying a coat of bitumineous aluminium paint @ 0.10 litre/SM.
70	M&L for 15mm thick screed bed in cement mortar (1:3) mixed with water proofing compound as per manufacturer\"s direction on fair faces of brick work of concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.(Note - WPC shall be measured and paid separately).
71	Surface dressing not exc. 15 cm deep in soft/loose soil, complete all as per specified and as directed by Engineer-in-charge.
72	Returning,filling in, including spreading, leveling, watering and well ramming in layers n exc 25cm complete all as per specified and as directed by Engineer-in-charge.
73	Removing excavated material not exc. 50 m & depositing where directed at a level not exc. 1.5 m above starting point complete all as per specified and as directed by Engineer-in-charge.
74	M&L for 15 mm thick rendering on fair faces of brick work or concrete block in cement mortar (1:4) and surface finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
75	M&L for hardcore of guage not exc. 63mm deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface of broken stone or boulders, complete all as per specified and as directed by Engineer-in-charge.
76	M&L for 75 mm thick cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) in sub base in flooring/ hard standing, complete all as specified and as directed by Engineer-in-charge.
77	S&F coloured non-skid ceramic tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.11 sqm but notexceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shades of tiles over 15 mm thick screed bed or bedding layers in CM 1:6 complete all as per specified and as directed by Engineer-in-charge.
78	M&L for Coloured Glazed ceramic tiles 350 x 450 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to stepsetc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick screedin CM (1:4), complete all as per specified and as directed by Engineer-in-charge.
79	S&F MS steel work in tubular trusses including special shaped washersetc., complete using ERW or induction butt welded tubes confirming to IS 1161- 1979 graded St 240, complete all as per specified and as directed by Engineer-in-charge.
80	S&F Pre-painted galvalume aluminium zinc coating GI based corrugated or semi-corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J hooks, complete all as specified and as directed by Engineer-in-charge.
81	S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J hooks, complete all as specified and as directed by Engineer-in-charge.
82	S&F 15mm dia bore pillar tap cast copper alloy with capston heads chroumium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe complete all as per specified and as directed by Engineer-in-charge.
83	Supply and fix 100mm dia grating doom of PTMT with minimum weight 25 grams complete all as specified and as directed by Engineer-in-charge.
84	S & F Soap dish, vitreous China white of approximate size 160 x 160 x 90 mm complete all as per specified and as directed by Engineer-in-charge.
85	S&F 32 mm dia waste coupling of PTMT (half or full threaded) complete all as specified and as directed by Engineer-in-charge.
86	S&F 32 mm dia low density polyethylene pipe (LDPE) of pressure rating @ 6Kgf per sqcm fixed to wall complete all as specified and as directed by Engineer-in-charge.
87	S&F in repairs bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as per specified and as directed by Engineer-in-charge.
88	M&L for construction of manholes with 150 mm dia bore for connecting new drains making good to pipe, rendering, benching, forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished as required as per Drawing No.- CESZ/TD/40, complete all as per specified and as directed by Engineer-in-charge.
89	M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for pipe of internal dia. 150mm, complete all as specified and as directed by Engineer-in-Charge.
90	S&F 150 mm long extruded Aluminium alloy handles, fabricated type, anodised, complete all as per specified and as directed by Engineer-in-charge.
91	S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as per specified and as directed by Engineer-in-charge.
92	Dismantling Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings, complete all as specified and as directed by Engineer-in-charge.
93	Demolition of unreinforced cement concrete in ground floors and pavings nexc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engineer-in-charge.
94	Demolition of brick work built in any cement mortar complete all as specified and as directed by Engineer-in-charge.
95	Dismantling wall and ceiling boards (fibre, pulp, insulation,etc) or insulation board/Slabs/blankets of any thickness including cover fillets, complete all as specified and as directed by Engineer-in-charge.
96	Dismantling Unframed timber scantlings 40 Sqcm and over in section and in any position, complete all as specified and as directed by Engineer-in-charge.
97	M&L 2nd class hard wood in scantling wrought timber unframed and fixed, complete all as specified and as directed by Engineer-in-charge.
98	Taking down chowkat or frame exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutter from the frame), complete all as specified and as directed by Engineer-in-charge.
99	Taking down chowkat or frame not exceeding 1.5 Sqm each (without taking off shutter from the frame), complete all as specified and as directed by Engineer-in-charge.
100	S&F 2 mm fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw andasher in roof, wall etc complete all as per specified and as directed by Engineer-in-charge.
101	M&L for Aluminium framed doors/ partitions with shutters (Double/Single leaf) with one or more rebates, aluminium sections of approved make, including jointing cleat for fixing, handles, glazing/panelling boards etc., complete all as per specified and as directed by Engineer-in-charge.
102	M&L for Aluminium framed windows,any pattern, fixed/side hung/sliding (two or three track) using aluminium sections, of approved make,with or with out sash bars, suitable for 4 mm thick glazing, including necessary joining cleats,glazing clips, aluminium snap beading, handles, locking arrangement etc., complete all as per specified and as directed by Engineer-in-charge.
103	M&L aluminium alloy extruded body door closer hydraulically regulated, designation No. 3, universal type, suitablefor door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as per specified and as directed by Engineer-in-charge.
104	S&F 5.5 mm thick sheet glass of selected quality exc. 0.5 sqm in each pane and sheet glass is ground or obscured orfrosted on one side, complete all as per specified and as directed by Engineer-in-charge.
105	S&F 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as per specified and as directed by Engineer-in-charge.
106	M&L for Wire netting of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples size of mesh 12 mm, complete all as per specified and as directed by Engineer-in-charge.
107	M&L for granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as per specified and as directed by Engineer-in-charge.
108	Demolition of reinforced cement concrete of any description and in any position not otherwise specificied provided for, complete all as per specified and as directed by Engineer-in-charge.
109	M&L 1:2:4 B-1 (20 mm graded aggegate) for providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin) corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar 1:4 complete all as per specified and as directed by Engineer-in-charge.
110	M&L for 25 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) in flooring/ hard standing laid in alternate bays including finishing the surface even and fair without using extra cement, complete all as specified and as directed by Engineer-in-charge.
111	M&L for Machine cut kota stone slab flooring 20 - 25 mm thick over cement screed base 20 mm th 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed by Engineer-in-charge.
112	Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing, complete all as specified and as directed by Engineer-in-charge.
113	M&L for G I Wire netting 0.9 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc., in walls, ceilings, stanchions, beams, etc., including all laps, cutting and waste, complete all as specified and as directed by Engineer-in-charge.
114	M&L for 15 mm thick rendering on fair faces of brick work or concrete block in cement mortar (1:6) and surface finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
115	M&L for 15 mm thick rendering on fair faces of brick work or one side of lathing in cement mortar 1:4 and surface finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
116	S&F in repair exposed GI powder coated snap grid frame of false ceiling 600 X 600 mm size of wall angle 25 X25 X 0.30mm size cross Tee 22 X 35 X 0.60mm with 4mm dia G.I. suspender fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm including supply and fixing of 4 mm thick E- board in false ceiling including fixing arrangement from roof and applying three coats of white wash on exposed surfaces complete all as per specified and as directed by Engineer-in-charge.
117	Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as per specified and as directed by Engineer-in-charge.
118	M&L for Coloured Glazed ceramic tiles 300 x 200 x 6 or 7 mm thick, on vertical surfaces such as skirting, dados and risers to stepsetc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick screedin CM (1:4), complete all as specified and as directed by Engineer-in-charge.
119	S&F coloured non-skid ceramic tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.11 sqm but notexceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shades of tiles over 15 mm thick screed bed or bedding layers in CM 1:4 complete all as per specified and as directed by Engineer-in-charge.
120	M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 of 60 mm thickness of M-35 grade with grey cement and no pigment, complete all as per specified and as directed by Engineer-in-charge.
121	M&L fo providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as per specified and as directed by Engineer-in-charge.
122	M&L for preparation of new or previously untreated wood or wood based surfaces of any description, exceeding 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed by Engineer-in-charge.
123	M&L for preparing new plastered surfaces and applyingtwo coats of cement based paint on walls, complete all as per specified and as directed by Engineer-in-charge.
124	M&L for preparing new plastered surface and applying two coats of distemper oil emulsion on wall surfaces over a coat of chalk whiting primer complete all as specified and as directed by Engineer-in-charge.
125	M&L for preparing old distempared surfaces after complete removal of existing treatment and applying two coats of oil bound distemper on walls over a coat of chalk whitening, complete all as per specified and as directed by Engineer-in-charge.
126	M&L preparation of old painted steel and iron surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as per specified and as directed by Engineer-in-charge.
127	M&L for preparing old paintedsurfaces including washing, rubbing down and stopping and applying one coat of cement based paint on walls, complete all as per specified and as directed by Engineer-in-charge.
128	M&L for erection of two staging walls with double stable of standard size of height upto 3m all as per SSR specifications and drawing No. RNG/ TD/ 37 sheet NO 1/1 for PVC tank complete all as per specified and as directed by Engineer-in-charge.
129	M&Lfor construction of septic tanks, exc, in ordinary soil, foundation in PCC (1:2:4), brick work in CM (1:4), RCC (1:1.5:3)Slab covers includingRCC(1:1.5:3) precastmanhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludgechambers etc., complete for 20 users.as per drg. No. TD/SZ/504 1/1, complete all as per specified and as directed by Engineer-in-charge.
130	M&L rendering 15mm thick on other than fair faces of brick work or on other side of lathing in cement mortar 1:6,surface to be finished fair & even without using extra cement, complete all as specified and as directed by Engineer-in-charge.
131	M&L for preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with two coats of cresote oil, complete all as specified and as directed by Engineer-in-charge.
132	M&L precast Coloured cement concrete chequered tiles 300x300x25 mm thick set jointed and pointed in with grey cement and pigment laid over floor, complete all as per specified and as directed by Engineer-in-charge.
133	M&L for PCC (1:2:4) type B-1 ( using 20 mm grade crushed stone aggregate) asin coping roof kerbs or mud stops, rounded or chamfered on edges with necessary form work as required complete all as specified and as directed by Engineer-in-charge.
134	Taking down shutters of any description not exc. 1 sqm each, complete all as specified and as directed by Engineer-in-charge.
135	Taking down shutters of any description exceeding 1Sqm but not exceeding 2 Sqm each, complete all as per specified and as directed by Engineer-in-charge.
136	M&L 35 mm thick second class hardwood glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc (without sash bar) edges of framing plain, chamfered orrounded fitted with cut and mitred beads for securingglass etc sizes of member (Bottom 250mm, stiles 100mm, top 120mm & lock rail 160mm wide)as specified in SSR part I section & clause 8.24 (a) complete all as specified and as directed by Engineer-in-charge.
137	S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete and both faces is covered with decorative face veneer with lipping/frame to match, complete all as specified and as directed by Engineer-in-charge.
138	S&F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as per specified and as directed by Engineer-in-charge.
139	S&F aluminium alloy 300 mm anodised sliding door bolts with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy, complete all as specified and as directed by Engineer-in-charge.
140	S&F 100 mm long extruded Aluminium alloy anodised butt hinges with galvanized mild steel hingepin type C-21, complete all as per specified and as directed by Engineer-in-charge.
141	S&F solid PVC wall paneling consisting of 5 mm thick PVC wood grain printed PVC sheet inclusive of solvent cement and fixing at site as per specification and directedin any position with screws, complete all as per specified and as directed by Engineer-in-charge.
142	S&F 5mm thick PVC sheet fillets of width 35mm for wall paneling inclusive of fixing on wall to make frame as per specifications and drawing, complete all as per specified and as directed by Engineer-in-charge.
143	S&F Stainless steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned tacles or galvanised wire staples, complete all as specified and as directed by Engineer-in-charge.
144	S&F in repair Stainless steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned tacles or galvanised wire staples, complete all as specified and as directed by Engineer-in-charge.
145	Rough excavation in soft/loose soil and getting out for shallow pit n. exc 1.5 m deep, complete all as specified and as directed by Engineer-in-charge.
146	Rough excavation in soft/loose soil and getting out forexceeding 1.5 m and n.exc 3.00 m deep, complete all as specified and as directed by Engineer-in-charge.
147	M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as per specified and as directed by Engineer-in-charge.
148	M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC / PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, complete all as per specified and as directed by Engineer-in-charge.
149	M&L for RCC (nominal mix) type B-1, 1:2:4 (20 mm graded Agg) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as per specified and as directed by Engineer-in-charge.
150	S&F of 150 mm internal diameter of double wall corrugated (DWC) high density polyethelene pipes (HDPE) and stiffness classes-8 (SN-8) with ISI marked (with CML no) with and including all fitting & jointing material for sewage line and laid in trenches as specified in IS 16098-2013 part-2 complete all as per specified and as directed by Engineer-in-charge.
151	S&F 110 mm dia PVC (SWR) pipes single socketed, in any length, with rubber ring joints fixed to walls, complete all as per specified and as directed by Engineer-in-charge.
152	S & F colour glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick, on vertical surface such as skirting, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or colour cement to match over 15 mm thick screed bed or bedding layers in CM 1:6 complete all as per specified and as directed by Engineer-in-charge
153	S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, complete all as per specified and as directed by Engineer-in-charge.
154	S&F 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc.divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters complete all as per specified and as directed by Engineer-in-charge.
155	S&F 4 mm thick sheet glass, ordinary quality in squares not exceeding 0.5 Sqm in each pane fixed with cut & mitred beads, complete all as specified and as directed by Engineer-in-charge.
156	S&F 75 mm long medium weight, cold rolled mild steel butt hinges, complete all as specified and as directed by Engineer-in-charge.
157	S&F 100 mm double action spring hinges, mild steel with steel wire spring, stove enamelled, black, complete all as specified and as directed by Engineer-in-charge.
158	S&F aluminium alloy 250 mm anodised sliding door bolts with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy, complete all as specified and as directed by Engineer-in-charge.
159	S & F 75 mm long mild steel pressed handles, oval type, stove enamelled black, complete all as per specified and as directed by Engineer-in-charge.
160	S&F 100 mm mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed by Engineer-in-charge.
161	S&F Vitreous China squatting pan \"Orissa\" patern size 580x440mm white with integral foot rest including connection to trap and to flushing pipe, anti-syphonage pipe, etc including \"P\" or \"S\" trap complete all as per specified and as directed by Engineer-in-charge.
162	M&L for construction of soakage wells including excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonary with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonary in CM 1:4, RCC cover slab in M-25/SFRC cover, inter connecting pipes of RCC/DWC complete filled with brick bats of size 1.2 M Dia X 3.00 M effective depth, complete all as per specified and as directed by Engineer-in-charge.
163	Taking down carefully aluminum/copper point wiring (light fan, socket or power) complete incl fittings and fixtures such as switches, sockets, light fittings, ceiling rose, pendants, lamp holders, shade conical, regulators etc and separating serviceable fittings for reuse in the same work and removing unserviceable fittings and fixtures with wiring cable, battens, wooden boards etc from site and making good disturbed surfaces of walls, floors, ceilingetc all complete all as specified and directed complete all as per specified and as directed by Engineer-in-charge.
164	Taking down carefully unserviceable main switches and DB’s including wooden boards and removing from site including making good disturbed surfaces of walls complete all as per specified and as directed by Engineer-in-charge.
165	Material and labour for point wiring complete with 1.5 sqmm PVC insulated unsheathed 1100 volts grade cable stranded copper conductor single core in casing caping of 20/25 mm size complete with sunk iron pressed steel terminal box for fitting mounting switch/ sockets regulators etc. with laminated sheet 3 mm thick cover and with 1.5 sqmm PVC insulated copper conductor earth wire and connected to earth dolly for one light point controlled by one switch complete all as specified and as directed by Engineer-in-charge.
166	All as per serial item No. 165 above but for exhaust/ceiling fan point controlled.
167	All as per serial item No. 165 above but for one 3 pin socket outlet 5 AMPs on independent board.
168	All as per serial item No. 165 above but for one 3 pin socket outlet 5 AMPs on same board.
169	All as per serial item No. 165 above but with 4 sqmm (nominal area) cable with 4.00 sq mm size copper earth continuity conductor of green colour for 15 A socket outlet on independent boards.
170	All as per serial item No. 165 above but for one bell point controlled by 5 Amps bell push.
171	M&L for point wiring with 1.5 sqmm size (nominal area) PVC insulated unsheathed single core multi stranded FRLSH copper conductorcable drawn into and incl PVC casing capping sleeves and caps of adequate width and length with all accessories and fittings like bends . elbow crosses etc with PVC round block and PVC terminal boxes with 3.00mm thick laminated sheet cover for mounting fittings etc like switches sockets and fan regulator incl 1.5 sqmm size PVC insulated multistranded FRLSH copper conductor cable as earth continuity conductor and connected to earth dolly complete all as specified and as directed for one light point controlled by one switch,complete all as per specified and as directed by Engineer-in-Charge.
172	All as per serial item No. 171 above but for exhaust/ceiling fan point controlled.
173	All as per serial item No. 171 above but for one 3 pin socket outlet 5 AMPs on independent board.
174	All as per serial item No. 171 above but for one 3 pin socket outlet 5 AMPs on same board.
175	All as per serial item No. 171 above but with 4 sqmm (nominal area) cable with 4.00 sq mm size copper earth continuity conductor of green colour for 15 A socket outlet on independent boards.
176	Supply and fix switch piano flush type, 5 / 6 Amps 240 volts single pole one way, complete all as specified and as directed by Engineer-in-charge.
177	Supply and fix ceiling rose surface backelite three terminals, PVC/polycarbonate, insulated body, complete all as specified and as directed by Engineer-in-charge.
178	Supply and fix socket outlet, 3 pin 6/5 Amps, flush type, complete all as specified and as directed by Engineer-in-charge.
179	Supply and fix switch socket combination 2 in 1, 3 pin, 5/6 Amp flush type universal, complete all as specified and as directed by Engineer-in-charge.
180	Supply and fix switch socket combination 05/16 Amp, 5 in 1, flush type universal, complete all as specified and as directed by Engineer-in-charge.
181	Supply and fix fan regulator electronic type, rotary step, Socket type 240 Volt, complete all as specified and as directed by Engineer-in-charge.
182	Supply and fix bell push 5 Amp flush type single pole 230 volts one way complete all as specified and as directed by Engineer-in-charge.
183	Supply and fix Call bell ding dong muscial type, AC, 230 Volts, Single pole, complete all as specified and as directed by Engineer-in-charge.
184	Supply and fix LED tube light fitting single tube 1x20 watts (4 ft) 240 v wall mounted LED batten ultra bright LED polycarbonate tube light with high efficiancy including all accesssories and internally pre-wired, complete all as specified and as directed by Engineer-in-charge.
185	S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light river holder connecting up with three core flexible copper conductor cable of uitable size, complete all as specified and as directed by Engineer-in-charge.
186	Supply and fix MCB SPN 240 Volts 6-32 Amp breaking capacity 10 KA rating, complete all as specified and as directed by Engineer-in-charge.
187	Supply and fix MCB SP 240 Volts 6 to 32 Amps breaking capacity 10 KA rating, complete all as specified and as directed by Engineer-in-charge.
188	Supply and fix MCB SPN 240 Volts 63 Amp breaking capacity 10 KA rating, complete all as specified and as directed by Engineer-in-charge.
189	Supply and fixing 4 pole MCCB 63 Amp 50 HZ 415V with rapturing capacity of 16 KA complete all as per specified and as directed by Engineer-in-charge.
190	Supply and fix MCB THREE POLE 415 Volts 40 Amps breaking capacity 10 kA rating \"C\" series, complete all as specified and as directed by Engineer-in-charge.
191	Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amp, 240 volt, complete all as specified and as directed by Engineer-in-charge.
192	Supply and fix Wiring for circuit/submain wiring longwith earth wire with the 2x6.0 sq. mm + 1x6.0 sq. mm earth wire sizes of FR is PVC insulated copper conductor, single core cable in surface/ recessed as required including taking down old unserviceable one, complete all as specified and as directed by Engineer-in-charge.
193	Supply and fix metal body exhaust fan of 450 mm Sweep, Single phase, 230 Volt, 50 Hz, Heavy duty copper wound motar, double ball bearing with outside opening louvers made by MS sheet, complete all as specified and as directed by Engineer-in-charge.
194	Supply and fix metal body exhaust fan of 300 mm Sweep, Single phase, 230 Volt, 50 Hz, Heavy duty copper wound motar, double ball bearing, 900 RPM, with outside opening louvers made by MS sheet, complete all as specified and as directed by Engineer-in-charge.
195	Supply and fix metal body exhaust fan of 250 mm Sweep, Single phase, 230 Volt, 50 Hz, Heavy duty copper wound motar, double ball bearing with outside opening louvers made by MS sheet, complete all as specified and as directed by Engineer-in-charge.
196	Supply and fix metal body exhaust fan of 225 mm Sweep, Single phase, 230 Volt, 50 Hz, Heavy duty copper wound motar, double ball bearing with outside opening louvers made by MS sheet, complete all as specified and as directed by Engineer-in-charge.
197	Supply and fixing ceiling fan having sweep size of 1200 mm, 240 volt, energy efficient, 3 blades with inetrnal pre-wired including accessories such as hook, nuts, bolts, etc. complete all as per specified and as directed by Engineer-in-charge.
198	Supply and fix 10 Sqmm 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and as directed by Engineer-in-charge.
199	Supply, laying and testing of cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core, complete all as specified and as directed by Engineer-in-charge.
200	Supply and fix 6 Sqmm 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and as directed by Engineer-in-charge.
201	Supply and fix 16 Sqmm 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and as directed by Engineer-in-charge.
202	Supply and fix 4 Sqmm 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular including taking down old unserviceable, complete all as specified and as directed by Engineer-in-charge.
203	Cutting existing 25/32 mm bore steel tubing for alterations or additions (each cut measured) complete all as per specified and as directed by Engineer-in-charge.
204	Supply and laying PP-R Pipes 25 mm dia ( PN 16/ SDR 7.4) with all fittings laid in trenches including testing complete all as per specified and as directed by Engineer-in-charge.
205	Supply and laying PP-R Pipes 32 mm dia ( PN 16/ SDR 7.4) with all fittings laid in trenches including testing complete all as per specified and as directed by Engineer-in-charge.
206	S&F gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe of 20 mm bore fixed in GI/PP-R pipe lines, complete all as per specified and as directed by Engineer-in-charge.
207	S&F gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe of 25 mm bore fixed in GI/PP-R pipe lines, complete all as per specified and as directed by Engineer-in-charge.
208	S&F wall Security light fittings 1x 15 Watt LED New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP openning seperate driver compartment with IP65 protection and impact resistance of IK07and including connection up with twine core twisted flexible copper conductor cable, complete all as specified and as directed by Engineer-in-charge.
209	S&F street light bracket made out of GI tubing 25 mm bore medium grade 1.20 Mtr long bend to required shape as in bracket for street light fittings fixed with two pair or MS flat iron 40mm x 5mm size and 30cm long clamp of required shape with bolts nuts and washers suitable for steel tubular pole including painting of mild steel flat iron surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-charge.
210	S&F House service bracket (Hook type) complete with 40 mm dia GI pipe 3.00 m long, medium grade, two Nos. of 90 degree bends, M.S hook and stay or guy complete all as per specified and as directed by Engineer-in-charge.
211	S&F House service bracket (Hook type) complete with 40 mm dia GI pipe 3.00 m long, medium grade, two Nos. of 90 degree bends, M.S hook and stay or guy including taking down old unserviceable one complete all as per specified and as directed by Engineer-in-charge.
212	Hanging only Ceiling Fan of any sweep and make and connecting up electric connection from Ceiling Rose/Connector to Fan with flexible wire and testing, complete all as specified and as directed by Engineer-in-charge.
213	Supply and fix sheet metal enclosure powder painted for MCB SPN 4 way 240 volt double door DB with din rail and suitable bus bar complete all as specified and as directed by Engineer-in-charge.
214	S&F PVC rectangular block for mounting, DBs, etc. with 3mm thick plastic laminated sheet cover of size 300x300x50 mm deep complete all as specified and as directed by Engineer-in-charge.
215	S&F PVC rectangular block for mounting, DBs, etc. with 3mm thick plastic laminated sheet cover of size 250 x 200 x 50 mm deep complete all as specified and as directed by Engineer-in-charge.
216	S&F double door sheet metal enclosures for DB\"s when MCB to be used is triple pole & neutral 8 way 240 volt, complete all as specified and as directed by Engineer-in-charge.
217	Supply and fix sheet metal enclosure powder painted for MCB SPN 12 way double door DB with din rail and suitable bus bar complete all as specified and as directed by Engineer-in-charge.
218	Supply and fix sheet metal enclosure powder painted for MCB SPN 8 way double door DB with din rail and suitable bus bar complete all as specified and as directed by Engineer-in-charge.
219	Taking down old ceiling fan and refixing fans after cleaning with ceiling hooks, nuts, bolts, washers and testing to its original position/location, complete all as specified and as directed by Engineer-in-charge.
220	S&F LED tube rod (double side connection) ultra bright glass LED tube of Capacity 20W, 230V, with high efficacy for installation in existing fittings including taking down old unserviceable one complete all as specified and as directed by Engineer-in-charge.
221	Supply and fixing in repair surface mounting slim LED flat panel 2\" x 2\" with high efficient LEDs 36 watts and glare-free opal difuser with aluminium body including taking down old unserviceable one complete all as specified and as directed by Engineer-in-charge.
222	M&L for earthing completewith galvanisedsteelearth plateelectrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade)and watering pipe 20 mm bore GI pipe(light grade) andchamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg.50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 1991 with charcoal dust and saltcomplete and earth leadconnected to earthing test point (up to main switches, DBs), complete all as specified & testing on completion. NOTE:-(I)item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire.(ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire.(iii)PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra costof additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.
223	M&L for earthing completewith galvanisedsteelearth plateelectrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade)and watering pipe 20 mm bore GI pipe(light grade) andchamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg.50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 1991 with charcoal dust and saltcomplete and earth leadconnected to earthing test point (up to main switches, DBs) including taking down old unserviceable one, complete all as specified & testing on completion. NOTE:-(I)item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire.(ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire.(iii)PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra costof additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule \"A\"/BOQ.

Also Visit

Tenders

Assam Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Special Repairs To Bldg No Et-14 At Changasri And Other Sanctioned Works At Rangia And Changsari Military Station Under Ge Rangia Spl Repairs To Bldg No Et-14 At Changasri And Other Sanctioned Works At Rangia And Changsari Military Station Under Ge Rangi, Rangia And Changsari-Assam

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Special Repairs To Bldg No Et-14 At Changasri And Other Sanctioned Works At Rangia And Changsari Military Station Under Ge Rangia Spl Repairs To Bldg No Et-14 At Changasri And Other Sanctioned Works At Rangia And Changsari Military Station Under Ge Rangi, Rangia And Changsari-Assam

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us