Military Engineer Services-MES has published Provn Of 01 Living Barracks For Or Near Cook House And Other Sanctioned Works At Old Cantt Under Ge Gangtok Provn Of 01 Living Barracks For Or Near Cook House And Other Sanctioned Works At Old Cantt Under Ge Gangtok. Submission Date for this Tender is 25-01-2022. Barrack Tenders in Gangtok Sikkim. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 27-Dec-2021 | Date_Amendment | Date | 03-01-2022 |
| 2 | 03-Jan-2022 | Date Corrigendum | Date | 10-01-2022 |
| 3 | 08-Jan-2022 | Date corrigendum | Date | 15-01-2022 |
| 4 | 14-Jan-2022 | Datecorrigendum2 | Date | 18-01-2022 |
| 5 | 18-Jan-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-01-2022 |
| Sl. No. | Item Description |
| 1 | SCHEDULE "A" (B/R WORKS) Dismantling Plain or Corrugated Steel Sheeting of any gauge and thickness including Nainital or similar Roof Coverings, complete all as specified and as directed. |
| 2 | Dismantling of wall and ceiling board(fibre pulp,insulation etc)/AC sheets and plywood any thickness and cover fillets and removal of dismantled materials/rubbish from site complete all as specified and dircted. |
| 3 | Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water remove Dust, debries/ rubbish etc., complete all as specified and as directed. |
| 4 | Taking down Chowkat or Frame (without taking off Shutter from the Frame) exc. 1.50 Sqm but n.exc 4 sqm complete all as specified and as directed. |
| 5 | All as per item No 4 above but n.exc 1.5 sqm each complete all as directed. |
| 6 | Demolition of PCC concrete block /brick walling built in cement mortar etc complete all as directed. |
| 7 | Dismantling Wrought Iron or Mild Steel Work, viz. Mild Steel Flat Iron (Wind Tie) and Similar Work including Mild Steel Bolts, Nuts, etc., complete all as specified and as directed. |
| 8 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for and removing rubbish from site of work complete all as specified and as directed |
| 9 | Surface excavation n exc 30 cm deep and avg 15cm deep and getting out in soft /loose soil etc complete all as specified and as directed. |
| 10 | Rough excavation not exc. 1.5 metre in depth and getting out in soft/loose soilcomplete all as specified and as directed by the Engr-in-Charge. |
| 11 | Excavation in trenchesnot exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting in soft/loose soicomplete all as specified and as directed by the Engr-in-Charge. |
| 12 | Excavation in trenches n.exc 1.50m wide n.exc 1.50m in depth & getting out in soft/loose soil complete all as specified and as directed. |
| 13 | Returning, filling in, including spreading levelling watering and well ramming in layers not exceeding 25 cms in depth in soft/loose soils complete all as specified and as directed by the Engr-in-Charge. |
| 14 | Removing excavated materials(soil) from site to a distance n.exc 50 mand depositing where directed at a level n.exc 1.5mabove the starting point complete all as specified and as directed. |
| 15 | Spreading and leveling in layers n.exc 25 cm thick selected earth under floors including watering well ramming etc completeall as specified and as directed by the Engr-in-Charge. |
| 16 | Material and labour for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete.etc completeall as specified and as directed. |
| 17 | Material and labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:4) including brought upto course complete all as specified and as directed by the Engr-in-Charge. |
| 18 | Material and labour for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in coping including weathering slightly rounded or chamfered angles and throating complete all as specified and as directed by the Engr-in-Charge. |
| 19 | M&L for plain cement concrete 1:3:6 type C2 (using 20mm graded stone aggregate)as in fixing of hold fast, bed blocks, and similar works etc including necessary form work as required complete all as specified and directed. |
| 20 | M&L for cutting holes in stone or block wall built in cement mortar for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required exc haih brick but not exc full brick wall etc complete all as specified and directed. |
| 21 | Material and Labour for precast cement concrete solid block masonry Type C1 (1:3:6) using 20 mm graded aggregate as per IS 383 exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and as directed by the Engr-in-Charge. |
| 22 | Material & labour for rendering 15mm thick on block concrete masonry wallsin CM 1:6, finished even and smooth without using extra cement complete all as specified. |
| 23 | M&L for rendering 20mm thick in cement mortar 1:4 in two layers of 10mm each using WPC in finishing layer on brick or concrete surfaces finished even & smooth (WPC for finishing layer will be paid seperately as supply only). |
| 24 | Supply only integral Water Proofing Compound, conforming to IS-2465-2003 of approved make complete all as specified and as directed. |
| 25 | M&L for applying two coats of exterior emulsion paint(weather coat) over a coat of alkali resistant primer including preparation of new/old wall surface complete all as specfied and as directed. |
| 26 | M&L for preparation of new plastered surfaces of walls applying two coats of distemper, oil emulsion, white or tinted over a coat of birla white super wall care putty of required thickness as per manufacturer instruction complete all as specified and as directed. |
| 27 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer to new or previously un-treated steel surfaces of any description over 10cm in width or girth including preparation of nw steel surfaces complete all as specified and as directed. |
| 28 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water remove dust etc complete all as specified and as directed. |
| 29 | S&F 4mm thick PVC acrylic sheet, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane etc complete. |
| 30 | Material and labour for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as directed. |
| 31 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams etc. rough finish surface of concrete flat all as specified and as directed. |
| 32 | M&L formwork to sides of conceret foundation ,plinth beams for rough finished surfaces of concrete etc complete all as specified and as directed. |
| 33 | M&L formwork to chajja for rough finished surfaces of concrete etc complete all as specified and as directed. |
| 34 | M & L for Formwork to sides of pillars, posts, struts, piers,columns, and stanchions for rough finished surfaces of concrete complete all as specified and as directed |
| 35 | M&L RCC nominal mix type B1,1:2:4 using 20mm graded stone aggr as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed |
| 36 | M&L RCC nominal mix type B1,1:2:4 using 20mm graded stone aggr as in beams ,cantilever ,lintel over 1.5 m spanconcrete complete all as specified and as directed |
| 37 | Material and labour forRCC 1:2:4 Type B0 (using 12.5mm graded stone aggregate) as in seismic bands/courses and bed plates completeall as specified and directed. NOTE : Reinforcement shall be measured and paid for separately. |
| 38 | M & L RCC (Nominal mix) type B0, 1:2:4 (using 20mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and as directed |
| 39 | M & L RCC (Nominal mix) type B1, 1:2:4 (using 20mm graded stone aggregate) as in chajja complete all as specified and as directed |
| 40 | Material and labour for 12mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15cm and n exc 22.5cm long completeall as specified and directed. |
| 41 | M&L for mild steel TMT bars, 10mm dia and over cut to length, bent to shape required including cranking, bending spirally, hooping for columns, hookings ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 42 | M&L for labour for Mild steel TMT bars 5mm dia and over upto including 10mm dia as in stirrups, spacers and binders cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 43 | S&F rolled section as in main and cross beams, hip and jack rafters; purlins wehre connected to common rafters and running rails and guides for sliding doors; fixed with angel cleat or other connecting plates conforming to Fe-410-W(Gde-E-250 quality-A) including one coat of red oxide zinc chrome primer after preparation of surfaces at contractor"s workshop before fabrication complete all as specified and as directed. |
| 44 | Material and labour for 75mm thick sand filling under floors including watering and consolidationcompleteall as specified and directed by the Engr-in-Charge. |
| 45 | M&L for hardcore of guage n.exc 63mm broken stone or boulders deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and as directed. |
| 46 | Materials and labour for 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate)as in sub-base of floor over and including 50 micron polythene film laid completeall as specified and as directed by the Engr-in-Charge. |
| 47 | M&L for providing 25 mm thick PCC 1:2:4 TYPE B0 ( using 12.5 mm graded aggregate in floor complete all as directed by engr in charge. |
| 48 | Material & labour fornon skid coloured ceramic tiles of 7 to 8 mm thick (Square/ rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm as in floors etc conforming to IS- 13712, grade B-II - (a) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including cement screed bed / bedding layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed.. |
| 49 | All as item No 48 here-in before but on vertical surfaces but on 10mm thick rendering in CM (1:4) complete.(Size =400x100mm) |
| 50 | M&L for non skid coloured ceramic tiles of 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc conforming to IS-13712, grade B-II - (a) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including cement screed bed/bedding layer of 15mm thick in cement mortar (1:60 complete all as specified and as directed. |
| 51 | Material and labour for coloured glazed ceramic tiles of size (300x200mm/350x250mm/450 x 350mm) of 7mm thick, as in vertical surfaces such as skirting/dado/riser to steps etc conforming to IS-13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed/backing layer of 10mm thick in cement (1:4) complete all as specified and as directed. |
| 52 | M&L for 18-20mm thick Granite Slab green in one piece machine cut, as in steps, jambs, pillars, window cills, cooking platforms and like bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing including rounding to edges of stone slabs such as in steps, cooking platforms, and other similar situations over and including 20mm thick bedding/backing layer in cement mortar (1:6) complete all as specified and as directed. |
| 53 | Supply & fixSecond class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. |
| 54 | S&F 30mm thick flush door shutter, solid core construction with block board core and plywood face panels.Commercial type on one side and other face covered with decorative face veneer with including 6mm thick teakwood lipping/frame to match complete all as specified and as directed. |
| 55 | M&L for 35mm thick 2nd class HW plain, framed, paneled shutters (two panel) with lock rail and panel of 9mm thick BWR commerical ply or 12mm veneered particle board with commercial face veneering on both faces.The size of rail & site as per IS : 1003 (Part-I), Kiln, seasoned & chemically pressure, treated complete all as specified and as directed. |
| 56 | M&L for 30mm thick 2nd class hard wood well seasoned glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR part I, Section 8, Clause 8.24(a) complete all as specified and as directed. |
| 57 | S&F of 30mm thick (style thickness) factory made solid panel PVC door shutter consisting of frame made out of mild steel tubes for top and bottom rails, solid steel frame shall be covered with heat moulded single side prelamPVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of both side prelam PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drawing given on MES schedule part-II (2020), complete all as specified and as directed. |
| 58 | S&F of factory made solid PVC door frame of size 50mm x 47mm made out of 5mm thick single side prelaminated PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelaminated sheet as per specification and drawing given on MES Schedule Part-II(2020) complete all as specified and as directed. |
| 59 | Supply and fix 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed |
| 60 | Supply and fix aluminium alloy anodised sliding door bolts 250 mm long with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section as directed. |
| 61 | Supply & fix Aluminium handles, 150 mm size, cast type, anodised complete all as specified and as directed. |
| 62 | S&F of 100mm size mild steel butt hinges medium weight complete all as specified and as directed. |
| 63 | S&F stainless steel wire cloth0.36mm nominal dia of wire & average width of aperture 1.18mm fixed to sliding aluminium widnows all as shown on typical drawings, specified and directed by Engr-in-Charge. |
| 64 | S&F mild steel work as in bands, straps, supports or stays for hold fasts, clamps for eaves board / facia , wind ties bend to shape , holes drilled and similar articlesconforming to Fe 290 Gde -E-165 including one coat of red oxide primer complete all as specified and as directed. |
| 65 | S&F stainless steel curtain rod 20-25 mm dia ,anodised aluminiumalloy with fixing brackets ,stops and complete all as dorected by engr in charge. |
| 66 | S&F wall brackets for fixing curtain rod etc complete all as dorected by engr in charge. |
| 67 | S&F 8/9mm thick PVC ceiling/wall panels of interlocking types, width 250/255 mm with lamination design and exc 60% of PVC content including necessary H-joints, internal/external corner trim, corner cove,F/J edge trims where required fixed with hidden screws to and includingsteel/woodenframe work of width 75 mmcomplete all as specified and as directed. |
| 68 | S&F for mild steel tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1998 grade St-240 including one shop coat of zinc chromate primer paint (including preparation of surface) at contractor"s workshop before fabrication and fixing complete all as specified and as directed. |
| 69 | S&F for Rolled sections Fe 410-w (grade E-250) quality-A as in main and cross beams,hip and jack rafters; purlins where connected to common rafters and running rails and guide for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed. |
| 70 | Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour and any pattern as approved having tensile strength of 550 Mpa as in roof coveringfixed with self tapping screws as in roofcomplete all as specified and directed by the Engr-in-Charge. |
| 71 | Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in ridges, valley, eaves, etc fixed with self tapping screwscomplete all as specified and directed by the Engr-in-Charge |
| 72 | S&F in repairs 4mm thick Non asbestos fibre cement building board (e- board) of approved texture for insulation and acoustic purpose if size 595 x 595 mm size fixed with staples on snap grid as in ceiling with an including dusting of surface and applying one coats of oil emulsion distemper over a coat of primer including preparation of surface complete all as specified and as directed. |
| 73 | S&F in repairs powder coated GI grid frame work for false ceiling comprising of the following sections for making partition of 600 x 600mm size fixed to walls with rawl plugs and screws and hanged to roof with and including 1.18 mm dia GI wire suspender of suitable length and buterfly clips, size of main tee shall be 23mmx 28mm x 0.70mm thick, cross tee shall be 24 x 23 x.0.70 mm thick and wall angle shall be 20mm x 20mm x 0.70mm thick complete all as per manufactuers instructions specified and directed. |
| 74 | S&F powder coated aluminiumsliding window frames of size 65mm x 38mm x 1 mm thick or appropriate section and shutter of section 20mm x 40mm x 1 mm or appropriate equivalent section fixed with 5 mm thick tinted sheet glass with rubber gasket, handle, locking arrangement ect complete all as specified & as directed. |
| 75 | S&Ffactory made steel ventilator with top hung shutter including friction/ box typehinges ,steel peg stay complete including taking out old/ unserviceable steel ventilator and making good to match as per existing surfaces etc complete all as specified and directed . |
| 76 | S&Fof 4mm thick sheet glass panes ordinary quality n.exc 0.5sqm each fixed to steel frame complete with oil putty in square including steel pin complete all as specified and as directed. |
| 77 | Supply and fixinggalvanised steel water tubing 15mm bore, medium grade with all fittings and fixed completeto walls/ceiling or laid in floors all as directed by the Engr-in-Charge. |
| 78 | Supply and fix in repair vitreous china squatting pan of "Orissa pattern" of size 580mm x440mm (white) with integral foot rest "P" or "S" trap, front or back inlet, any pattern(excluding flushing cistern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including connection to trap, and to flushing pipe, antisyphonage pipe etc. complete including making good to floor all as specified and as directed. Make : Jaquar Cat No. FNS-WHT-40751SSM one piece EWS S concealed size 365x630x750mm S-Trap 220mm, Cat No. FNS-WHT-4021 flush fittings or equivalent approved. |
| 79 | Supply and fix in repairs vitreous china (white) flat back urinal of size 420 x 395 x 635mm, including providing and fixing pluts, bedding the urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws,ponting around urinal back in cement and providing grating and union for discharge pipe including 32mm bore PVC discharge pipe complete all as specified and as directed. Make : Cera Cat No. 5001 or equivalent approved make. |
| 80 | Supply and fix in repair vitreous china, white colour, flat back, wash hand basin of size 55cm x 40cm x 79 cm fixed with brackets, including providing 32mm dia PVC waste pipe, 32mm bore CP waste coupling with or without padestal and making all necessary connections complete all as specified and as directed. Make : ESSCO Cat part No. ECS-WHT-803 or equivalent/approved complete all as specified and as directed. |
| 81 | Supply and fix in repairs for PVC floor/Nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 (diameter of outlet 100mm) complete all as specified and as directed. |
| 82 | Supply and fixed in repairs 15mm bore pillar taps, fancy type with long neck with aerator cast copper alloy with capstan head, chromium plated, screwed down, high pressure with long screwed shanks, fly nuts, with screwed for GI pipe complete all as specified and as directed.Make : ESSCO Cat part No. SQT-508KN or equivalent approved make. |
| 83 | Supply & fixangular stop cock made of brass chromium plated screwed both ends for iron pipe for 15mm bore complete all as directed by the Engr-in-Charge. Make: Essco Cat Part No DLX-ESS 526 or equivalent. |
| 84 | S&F bib tap, long body cast copper alloy fancy type, chromium plated with crutch or butterfly handle, screwed down for 15mm bore GI pipe or for brass ferrule including taking down old unserviceable one. Make : ESSCO CAT Part No. SQT-511 KN or equivalent approved make. |
| 85 | Supply and fix PVC connections 15mm size with PTMT/Brass nuts of length 450mm complete all as directed by the Engr-in-Charge. Make Prayag Cat No. 323 or equivalent make approved. |
| 86 | S&F PVC (SWR) half round 150mm dia with rounded edges incl all accessories like bend ,T etc for eaves gutter complete all as specified and directed. (Make:PRINCE or equivalent) |
| 87 | Supply and fix PVC (SWR) pipes 110mm dia,single socketed, in anylength with rubber ringjointsfixed to wallcomplete all as specified and directed by the Engr-in-Charge. |
| 88 | Supply and fix110 mm bore PVC (SWR) bends any radiuscomplete all as specified and directed |
| 89 | Supply and fixvent cowls fixed to110 mm bore complete all as specified and directed |
| 90 | S&Ftubular towel rail 20mm dia D type, Brass Chromium Plated 60 cm long between flanges complete all as specified and as directed. |
| 91 | S&F in repair CP Soap dish holder including CP screws complete all as specified and as directed .(Make : JAQUAR Cat No. ACN-1131N or equivalent approved make). |
| 92 | S &Fstainless steel fancy type curtain rods 20 -25 mm dia, anodised aluminium alloywith fixing brackets, stops,and complete fitments all as specified and directed. |
| 93 | S&F wall brackets and end brackets for curtain rodscomplete all as specified and as directed. |
| 94 | S&Fof PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed. |
| 95 | Material & labour for PCC 1:3:6 type C2 (using 40 mm grade stone aggregate), 75 mm thick as in plinth protection / approach path of bldg complete all as specified and directed. |
| 96 | Material and labour for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in surface channels and drains complete all as specified and as directed. |
| 97 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including form, moulds, mittred/stopped ends complete all as specified and as directed. |
| 98 | Supply & fix 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete (excluding PVC connection pipe) as directed by the Engineer-in-Charge. Make : HindwareModel SLEEK ESSENCE DUAL FLUSH or equivalent product of Parry ware / Cera. |
| 99 | M&L for lacquer coated coloured chequered cement concrete tiles of size 300x300x25mm thick set, jointed and pointed in neat slurry in floors and steps with grey cement and pigments over and incl 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and as directed. |
| 100 | M&L for applying three coats of white wash including preparation of new wall surfaces complete all as specified and as directed |
| 101 | M&L for 2nd class hard wood as in timber scantling, clean sawn and fixed unframed work etc complete all as specified and as directed. |
| 102 | SCHEDULE "A" (E/M WORKS) M & L for point wiring with 1.5 Sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) Cable of working voltage 1100 Volts grade conforming to IS-694 pt-I & II of 2000 drawn in and including 25 mm size PVC rigid non matellic casing caping (Double lock)with all casing capping fittings &accessories with 1.60 mm thick pressed steel or mild steel sheet sunk box covered with 3 mm thick backelite sheet fixed with brass screws & cup washers including 1.5 sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) cable as earth continuity conductor connected to main switch / DB"s or common earth dolly complete forfor light point/ fan point/ exhaust fan point/ call bell point/ controlled by one switch 5/6 Amp one way complete all as specified and directed. |
| 103 | All as per Sl item No.102 above but with 1.5 Sqmm copper conductor with 1.5 Sqmm earth stranded wire for 5 Amps power point in independent board. |
| 104 | All as per Sl item No. 102 above butwith 2.5 Sqmm earth stranded wire for 16 Amps power point in independent board. |
| 105 | All as per Sl item No. 102 above but for one 5 Amps switch point controlled by one switch with 1.5 Sqmm copper cable on same board. |
| 106 | S&Fdecorative LEDtube light fitting 1x18 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 107 | S&F in repairs lamp holder angular/straight insulated body, with back plate suitable for batten fittings, white/ivory finish complete all as directed. Make : Anchor Product Code No 39527 or equivalent of approved make |
| 108 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 109 | S&F exhaust fan, steel body AC single phase, 230 Vof size 300mm sweep with, blades, and frame and louvers including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 110 | S&F in repairsswitch piano, flush type, 6 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge Make : Anchor Product Code No 50053 or equivalent of approved make |
| 111 | S&F in repairs switch socket combination, 2 in 1, 6 pin, 5/6 Amps and 15/16 Amps, multipurpose , flush, non shutter, non inter locking type, 230 volt flushtype, white/ivory finish with two fixing hole including suitable gang box completecomplete all as directed including taking down old one. Make : Anchor Cat No 38808/50665 or equivalent of approved make |
| 112 | S&F in repairs switch socket combination, modular type, 2 in 1, 3 Pin, 5/6 Amps and 15/16 Amps, multipurpose, flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two/four fixing hole including suitable gang box complete all as specified and as directed. |
| 113 | S&F in repairsceiling rose, PVC/polycarbonate insulated body, 3 terminal and 240 volts, ISI markedcomplete all as specified and directed Make : Anchor Product Code No 39040 or equivalent of approved make |
| 114 | S&Fsheet metal enclosure for12 way Distribution Boards (DB’s), triple pole and neutral double door with IP-43 protection suitable for fixing MCB"s/lsolators after and including taking down old DBwith MCB complete all as specified and as directed. (Make : L&T cat No DBTPE012DD or equivalent of approved make) |
| 115 | S&Fsheet metal enclosure for8 way Distribution Boards (DB’s), triple pole and neutral double door with IP-43 protection suitable for fixing MCB"s/lsolators after and including taking down old DBwith MCB complete all as specified and as directed. (Make : L&T cat No DBTPE008DD or equivalent of approved make) |
| 116 | S&Fsheet metal enclosure for4 way Distribution Boards (DB’s), triple pole and neutral double door with IP-43 protection suitable for fixing MCB"s/lsolators after and including taking down old DBwith MCB complete all as specified and as directed. (Make : L&T cat No DBTPE004DD or equivalent of approved make) |
| 117 | M&L for submain wiring alongwith earth wire of size2x 6.0 Sqmm + 1x6 Sqmm earth wire ISI marked FRLS PVC insulated multi stranded copper conductor single core cable drawn in and including PVC casing and caping of adequate size with all accessories as required as specified and as directed including taking down old unserviceable submain wiring.(Note : Three run of PVC wire with one run of PVC casing and caping will be measured and paid as one length). |
| 118 | S&F MCB single pole 6 to 32 Amps, 240 volts, 10 KA rapturing capacity, "C" curve complete all as specified and as directed.(Make : Havells Cat No. DHMGBSPF006-032 or equivalent approved). |
| 119 | S&F in repairs MCB single pole & neutral 6 to 32 Amps, 240 Volts, 10 KA rapturing capacity,"C" Curve complete all as directed by Engineer-in-charge. (Make : L&T cat No BB20600C to BB20320C or equivalent of approved make) |
| 120 | M & L for earthing in repairs complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground(earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe "light grade", watering pipe 20 mm dia GI "light grade", GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continious earth wire on pole, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 1991 print and as directed . |
| 121 | S&F electrical water heater storage with copper inner tank and heating element, capacity 25 Ltr BEE-5 Star rated complete with all accessories such as safety valve thermostate, NRV, connection piece etc.Make : Havells, Cat -Monza DX GHWBMGSWH0550 or equivalent approved. |
| 122 | Supply, laying, jointing & testing 1100 volts grade, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured LT electric power cables, heavy duty with aluminium conductor of cross sectional area 25 Sqmm 2 core with all fixing & connecting accessories as in service connection complete all as specified and as directed including taking down old unserviceable one. Note : The rate quoted by the bidder shall be deemed to be inclusive of cost of aluminium thimbels/lugs of suitable size. |
| 123 | Supply, laying, jointing & testing 1100 volts grade, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured LT electric power cables, heavy duty with aluminium conductor of cross sectional area 16 Sqmm 2 core with all fixing & connecting accessories as in service connection complete all as specified and as directed including taking down old unserviceable one. Note : The rate quoted by the bidder shall be deemed to be inclusive of cost of aluminium thimbels/lugs of suitable size. |
| 124 | Supply, laying, jointing & testing 1100 volts grade, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured LT electric power cables, heavy duty with aluminium conductor of cross sectional area 16 Sqmm 2 core with all fixing & connecting accessories as in service connection complete all as specified and as directed including taking down old unserviceable one. Note : The rate quoted by the bidder shall be deemed to be inclusive of cost of aluminium thimbels/lugs of suitable size. |
| 125 | Supply, laying, jointing & testing 1100 volts grade, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured LT electric power cables, heavy duty with aluminium conductor of cross sectional area 4 Sqmm 2 core with all fixing & connecting accessories as in service connection complete all as specified and as directed including taking down old unserviceable one. Note : The rate quoted by the bidder shall be deemed to be inclusive of cost of aluminium thimbels/lugs of suitable size. |
| 126 | Supply & fixing Rotational moulded polyethylene water storage tank, 1000 litres capacity, ISI marked multi layer constriction (cylindrical vertical with closed top), hoisted & fixedin position including supply and fixing of25mm bore Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe of having weight not less than 455 gms including connection complete all as specified and as directed including dismantling of old unserviceable water tank. Make of Water Tank : SINTEX or equivalent make approved. Make of Ball Valve : Prayag or equivalent make approved. |
| 127 | Supply & fixing Rotational moulded polyethylene water storage tank, 500 litres capacity, ISI marked multi layer constriction (cylindrical vertical with closed top), hoisted & fixedin position including supply and fixing of25mm bore Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe of having weight not less than 455 gms including connection complete all as specified and as directed including dismantling of old unserviceable water tank. Make of Water Tank : SINTEX or equivalent make approved. Make of Ball Valve : Prayag or equivalent make approved. |
| 128 | M&L for 25mm dia steel tubing medium grade glavanised with all fitting fixed complete to walls and ceiling or floor complete all as specified and as directed. |
| 129 | Supply & fixWall Mixer hot and coldwith aerator, chromium platedfor 15mm bore GI Pipeor for brass ferrule including taking down old unserviceable one.Make : ESSCO CAT No : MQT-520 KN or equivalent approved Make. |
| 130 | S&F CP mixer for hot and cold water mixing, ISI marked with iron wheel head screwed both ends for GI pipe complete all as specified and as directed. |
| 131 | S & F 15mm bore gun metal gate valves , ISI marked with iron wheel head ,screwed both ends for iron pipe and fixed complete all as directed and specified |
| 132 | S & F 25mm bore gun metal gate valves , ISI marked with iron wheel head ,screwed both ends for iron pipe and fixed complete all as directed and specified |
| 133 | M&L for 15mm dia steel tubing medium grade galvanised with all fitting fixed complete to walls and ceilings or floor complete all as specified and as directed. |
| 134 | S&F stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore, complete all as specified and as directed. |
| 135 | Supply & fix stop connection 15mm size with PTMT nuts of length 750 mm complete all as specified and as directed. |
| 136 | Screwing 25mm bore in existing steel tubing for alteration or addition (or lengthening screw on pipe to form connection) complete all as specified and as directed. |
| 137 | Taking down carefully old aluminium/copper point wiring for one light, socket or power etc incl all fittings such as switches sockets, holders, light fittings, fan regulator etc and keeping aside complete all as specified and as directed. |
| 138 | Taking down carefully old main switch board of sheet metal wooden etc including main switch, fitting, fixture, bulk head, ceiling rose, tubelight fitting, MCB DB, change over with MCB/MCCBs etc complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
