Military Engineer Services-MES has published Special Repairs To Bldg No T-44 And T-44A And Special Repairs For Replacement Of Ot Lights In Operation Theatre At Inhs Jeevanti Under Ge Gomantak Vasco Special Repairs To Bldg No T-44 And T-44A And Special Repairs For Replacement Of Ot Lights In Operatio. Submission Date for this Tender is 13-01-2022. Building Repair Tenders in VASCO DA GAMA Goa. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 27-Dec-2021 | amendment | Financial Bid | 06-01-2022 |
| 2 | 29-Dec-2021 | revisedboq | BOQ | 06-01-2022 |
| 3 | 06-Jan-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-01-2022 |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge.Note : Debris shall be removed outside MD land |
| 2 | Material & Labour for rendering in CM 1 : 4 (10+5)=15mm thickness on brick/cement/stone surfaces and finishes the surface even and smooth with out using extra cement including mixing with liquid WPC on top 5mm thick only Note :- Water proofing compound will be paid separately |
| 3 | Material & Labour two coats of acrylic emulsion extenior paint (anti fungal painting-APEX or Equivalent) over a coat of acrylic amulsion primer including preparation of new concrete surface of any description all as specified and directed by Engr-in-Charge. |
| 4 | Supply only integral liquid water proofing compound of approved make (ISI marked) for addition in cement mortar/concrete |
| 5 | Material & Labour for 10 mm thick renderuing in CM 1 : 6 on brick/cement/stone surfaces and finishes the surface even and smooth with out using extra cement . |
| 6 | Material & Labour for providing two coats of oil-bound distemper over a coat of alkali-resistand primer on new plastered surfaces including necessary preparation to surfaces complete all as specified and as directed |
| 7 | Material & Labour for providing one coats of oil-bound distemper over a coat of alkali-resistand primer on old plastered surfaces including necessary preparation to surfaces complete all as specified and as directed |
| 8 | Demolition of brick work or stone/boulder masonry built in cement mortar, complete all as specified. |
| 9 | M&L precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in cement mortar (1:6) ,type 1:3:6 (20mm graded aggregate) all as specified and directed. |
| 10 | Dismantling asbestos cement (corrugated, semi corrugated etc) in roof coverings |
| 11 | Supply & Fixing pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering cladding to wall fixed with self tapping screws as specified . |
| 12 | Supply & FixingPre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 13 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 14 | Supply & Fixing mild steel works in roof trussed framed, trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angles, channel or flat sections) MS pipe etc including distance pieces, cleats etc. (Fe- 410-W (Gde E-250quality A) |
| 15 | Material & Labourfor preparation of new steel surfaces and apply two coat of Anti corrossive paint over a coat of anti corresive primer wiith complete removal of existing treatment all as specified and directed |
| 16 | Material & LabourPCC type B1, 1:2:4 (using 20 mm gradee aggregate) for coping all as specified and directed. |
| 17 | Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) orinsulation boards/slabs/blankets, any thickness, including cover fillets |
| 18 | S&F Anodised aluminium snap grid frame work for false ceiling all as specified size of grid 605x605mm. |
| 19 | Supply & Fixing 10 mm thick PVC insulation panels in ceiling board with EPS of net to 1mm printed PVC sheet suitably placed in false ceiling grid all as per specification and drawing |
| 20 | Taking down of chowkat or frame area not exceeding 1.5 Sqm each with shutter (without taking off shutters from frames) |
| 21 | S&F powder coated aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. Note:frame shall be fixed with 08 Nos 120mm length screw with rawal plug. |
| 22 | S&F glazing with 4mm thick sheet glass ordinary type incl rubber beadings/gaskets around glass panes all as specified. |
| 23 | supply and fixing Aluminumpowder coated deco grill make DG 104 (10 mm thick section ) with frame of section not less than 0.136 kg/rm |
| 24 | S&F aluminium alloy anodised wire mesh of size 1.5 mm x 3 mm mesh 20 Gauge thick of make M/S Kiran Netting or equivalent asapproved by GE. |
| 25 | S&F solid PVCdoor frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube complete all asspecified. |
| 26 | S&Fsolid PVC moulded door shutter with particle board core, 28 to 30mm thick ( stiles) with 2 raised panels designed with 2mm thick moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face complete all as specified. |
| 27 | S & F 35mm thick 2nd class HW Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated |
| 28 | S & F 2nd class hard wood plain solid straight chowkats frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified. |
| 29 | S&F aluminium alloy anodised sliding door bolt 300 mm long with hook and staple(bolt type) and fixing clip of sheet coat or extruded section and fixing bolt and sliding bolts of extruded section. |
| 30 | S & F aluminiumanodised barrel tower bolts 150 mm long |
| 31 | S & F Extruded aluminum anodised alloy handle 150 mm fabricated type |
| 32 | S & F stainless steel butt hinges 100 mm long.. |
| 33 | Taking down carefully aluminium point wiring (light, fan, socket, bell or power) complete including all fittings and fixtures, removing, materials from site and making good disturbed surfaces of wall, ceilings etc. |
| 34 | Material and labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall/ceiling and modular metal flush box, modular white cover plate with frame, blanking plate etc accessories etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light point controlled by one, one way switch 06 Amps. Note: Rate quoted is deemed to be inclusive of three runs of 1.5 sqmm PVC insulated FRLS wire ,one run of conduit and suitable module of Modular boxex and cover plate and blanking plate where reqd. |
| 35 | All as per item No 34 but 2/3 pin socket out let 5 Amps with 1.5 Sqmm on same board. |
| 36 | All as per item No 34 above but for bell point. |
| 37 | All as per item No 34 but 2/3 pin socket out let 5 Amps with 1.5 Sqmm on independent board. |
| 38 | All as per item No 34 buteight lightpoint controlled by one way switch through dimmer all as pecified and directed . |
| 39 | All as per item No 34 here-in-before but for 2 in 1 three pin socket outlet 15/25 Amps on independent board with 4 Sqmm cable FRLS copper conductor multistrandedincluding 4 sqmm PVC insulated and unsheathed FRLS copper conductor cable as earth continuity wire all as specified and directed by Engr-in-Charge. |
| 40 | Supply & Fixing modular switch 1 way 6A, 1 module, 230 volts. |
| 41 | Supply & Fixing modular switch one way 16 Amps, 1 module, 230 volts. |
| 42 | Supply & Fixing modular bell push 6 Amps, 1 module, 230 volts. |
| 43 | Supply & Fixing modular socket 6 Amps-2/3 pin combined, 2 module. |
| 44 | Supply & Fixing modular socket 6A/16A-2/3 pin combined, 2 module. |
| 45 | Supply and fix ceiling rose surfaces bakelite 65 x 50 mm three terminals including supply and fix PVC plate or square blocks. |
| 46 | Supply & Fixing stepped type 2 module modular electronic fan regulator flush type including removal of old one. |
| 47 | Supply & Fixing modular RJ 11 Telephone socket 1 module including removal of old one. |
| 48 | Supply & Fixing modular coaxial cable television socket 1 module including removal of old one. |
| 49 | M & L forRigid non-metallic PVC conduit inclusive of boxes (junction/terminal), inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc 25mm external dia for telephone cable and TV socket concealed in wall by chases cutting all as specifeid and directed by Engr-in-Charge. |
| 50 | Supply & fixingcall bell dingdong AC 230 Volts single pole. |
| 51 | Supply & fixingMCB, 0.5 to 5 Amps, single pole, C Series, 10 KA, 240 volts. |
| 52 | Supply & fixingMCB, 6 to 32 Amps, single pole, C Series, 10 KA, 240 volts. |
| 53 | Supply & fixingMCB, 6 to 32 Amps, SPN , C Series, 10 KA, 240 volts. |
| 54 | Supply and fixingMCB 40 Amps TPN, C Series, 10 KA, 415 volts. |
| 55 | Supply and fixingMCB 63 Amps TPN, C Series, 10 KA, 415 volts. |
| 56 | Supply & Fixing MCB protected socket of 20 Amps with sheet metal enclosure including plug top 20 Amps complete with one single pole 240V with 20 Amps MCB "C" curve including disconnecting and removal of old one any type.Make : Havells Cat Part No. DHDMCSN0251020 or equivalent in Legrand/C&S/Anchor |
| 57 | Supply & Fixing sheet metal enclosure DB,8way, SPN, double door factory made powder coated including neutral and earth link connector flush fixed in wall complete all as directed by Engr-in-Charge. |
| 58 | Supply & Fixing sheet metal enclosure DB,12 way, SPN, double door factory made powder coated including neutral and earth link connector flush fixed in wall complete all as directed by Engr-in-Charge. |
| 59 | Supply & Fixing sheet metal enclosure DB, 6 way, TPN, double door factory made powder coated including neutral and earth link connector flush fixed in wall complete including dismantling of old one. |
| 60 | Supply & Fixing submain wiring with 3 Runs (Phase, Neutral and Earth) of 4 Sqmm, PVC insulated, unsheathed, single core, multistranded, 1100 volts, FRLS copper conductor cable drawn in and including 25/32mm wide PVC conduit concealed with all accessories as required and connecting to existing main switch board/Distribution Board and testing on completion all as directed by Engineer-in-Charge. |
| 61 | Material and Labour for sub main wiring (three phase) with single core 1100 V grade conforming to relevant IS,PVC insulated unsheathed cables four runs of 6 Sq mm multi stranded copper conductor drawn in and including suitable size ofnon metallic PVC conduit incl allaccessories concealed in walls/roof/floors/ceiling etc with an earth wire of one run 6 sqmm copper wire earth continuity conductor connecting to existing main switch board \ Distribution Board and testing on completion etc including taking down old submain wiring of any type with conduit/cpaing casingand making good disturbed surfaces to match existing all as specified and directed. Note : five runs of 6 sqmm cableand one run of PVC non metallic rigid conduit of suitable size shall be measured as one run. |
| 62 | Supply & fixing brushless direct current (BLDC) ceiling fan 1400mm sweep (ISI Marked), 230 volts, includung connection rod as per required size of length of GI pipe medium grade including dismantling of old one and depositing in MES store yard as per specified and directed by Engr-in-Charge. Make : Orient/Havells/Bajaj |
| 63 | Supply & fixing exhaust fan (Metal body) 300mm sweep, heavy duty, 230 volts ,1400 RPM including louvers of suitable size and making hole size as per requirement , dismantling of old one depositing in MES store yard as per specified and directed by Engr-in-Charge. Make : Orient/Havells/Bajaj |
| 64 | S & F LED Bldg Security Street light 30W ,IP 65 with suitable surge protection device including suitable sizeof GI pipe 1.2 m long bent to required shape,clamps,nut ,bolts andmaking electrical connection to the fitting with Suitable size of service wire. |
| 65 | M/L for earthing complete with steel earth plate eletrode 60cm x 60cm x6mm thick buried dirctly in ground vertically (earth pit not less than 2.25 mtr below ground level) with top edge of plat not less than 1.5 mtr below ground level connected to GI wire 4mm dia by means of bolts. nuts,check nuts and washers etc including protection pipe 15mm dia up to 7.5m length , provision the earth lead to earth connectionin ther main distribution box with lugs and GI nuts,bolts, earthing shall bedone all as per shown electrical plate No 3 of SSR part 1 Including neccessary excavation in disintergratedandhard soiland 20mm dia GI pipe withfunel for wateringPCC earth chamber 100mm thick precast RCC cover with suitable precast RCC frame and earth test point and testing in presence of Engr -in -Charge. |
| 66 | Supply install and testing of DOUBLE DOMEShadowless LED OT Light multi colourwith imported German Arms & Spring Arms360-degree rotation from the central and revolving axis complete in all respect as per manufacturer including all necessary fabrication work ,making electrical connections with necessary wiring work and taking down old OT light and depositing to MES store yard complete all as directed by Engr-in-Charge. Make of OT light :- Hospedia Medicare Pvt Ltd (Catalouge No: LED 50/50 DC SURGICAL LIGHT)or equivalent in Steris /Stryker/Philips Technical Specifications:- (i) Light Intensity : 00000 – 160000 Lux (ii)Adjustable Color Range : 4500K (iii) Color Rendition Index : >96 (iv) Spot Diameter : 130 – 300 mm Adjustable (v)Lighting Depth : >1250mm (vi) Supply Voltage : 220-240 V (vii) Power Consumption at Full Power : 48 W Notes:- (i) Rate quoted deemed to be inclusive for Complete light fitiing,fabrication work,Electrical work including all mtrls reqd for the same,taking down of old OT light fitting & depositing to MES store and all taxes applicable. (ii) Contractor will submit Warranty certificate as per manufacturer warranty period. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
