|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size). INCL CARRIAGES ALL COMPLETE. |
| 3 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level andcuring complete with:Cement mortar 1:6 (1 Cement : 6 coarse sand). INCL ALL CARRIAGES |
| 4 | Providing and laying in position reinforced cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) INCL ALL CARRIAGES |
| 5 | Centering and Shuttering including strutting propping etc and removal of formwork. |
| 6 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level andcuring complete with:Cement mortar 1:6 (1 Cement : 6 coarse sand). INCL ALL CARRIAGES |
| 7 | Extra over stone masonary for superstructure above plinth level upto floor V level. Incl all carriages |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). INCL ALL CARRIAGES |
| 9 | Centering and Shuttering including strutting propping etc and removal of formwork. |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. INCL ALL CARRIAGES |
| 11 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60mm thickness, including hinges jamb, lock jamb, bead and if required angle threshold ofmild steel angle of section 50x25mm, or base ties of 1.60mm pressed, mild steel welded or rigidly fixed together by mechanical means, including M.Spressed butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: INCL ALL CARRIAGES |
| 12 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded. INCL ALL CARRIAGES |
| 13 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2. INCL ALL CARRIAGES. |
| 14 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.80 mm thick with zinc coating not less than 275 gram/m2. INCL ALL CARRIAGES |
| 15 | 20mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 coarse sand). INCL ALL CARRIAGES |
| 16 | Providing and Fixing Panelled shutters for doors including MS butt hinges of 2nd class Deodar wood 30mm thick. INCL ALL CARRIAGES. |
| 17 | Providing and Fixing Panelling in panelled shutters for doors of decorative ply one side decorative veneer and commercial veneer on other face 12mm thick. Incl all carriages. |
| 18 | Providing and Fixing Glazed shutters for windows using 10KG/sqm (4mm thick) glass panes including MS butt hinges of 2nd class Deodar wood 30mm thick. INCL ALL CARRIAGES. |
| 19 | Providing and Fixing 35MM thick wire gauge shutters for windows and doors including MS wire gauge 35mm thick 2nd class Deodar wood . INCL ALL CARRIAGES. |
| 20 | Applying priming coat with ready mixed pink primer on wood work. |
| 21 | Painting with ready mixed paint of approved brand and manufacture in all shades two or more coats on new surfaces. |
| 22 | Finishing walls with three coats of water proofing cement paint of approved brand and manufacture of reqd shade. |
| 23 | Providing and applying white cement based putty of average thickness 2mm of approved brand and manufacture. |
| 24 | Providing wood work in frames of false celing, partitions etc. sawn and fixed in position of buldoo/ fir wood. |
| 25 | Providing and fixing 4.5mm thick hard plyboard with one side teak face in ceiling with necessary nails etc complete. |
| 26 | Making plinth protection 50mm thick Cement Concrete 1:3:6 mix over 75mm bed of dry brick ballast well rammed. Incl all carriages |
| 27 | Cement Concrete Flooring 1:2:4 mix. 50MM thick. INCL ALL CARRIAGES |
| 28 | CIB (citizen information Board ) size 4\"00\"x5\"00\"x0\"9\" (above plinth level) with tepered top having 20 degree slope in Brick Masonary(1:4) including plaster , paint, lettering and logos as per instruction of Engineer -in-charge including carriage of material. ( complete job) |
