Delhi Development Authority-DDA has published Maintenance Of Residential Flats And Staff Quarters At Commonwealth Games Village. Sh Day To Day Maintenance And Attending Daily Complaints Of Internal Services Of 45 Dda Staff Quarters At Commonwealth Games Village. ( Specialized Work ) . Maintenanc. Submission Date for this Tender is 23-12-2021. Building Work Tenders in AS PER NIT DOCUMENTS Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : (a) White solid plastic seat with lid. |
| 2 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. (a) 15 mm nominal bore. |
| 3 | ProvidingSeatcoverofmakeOdeon Quietcloser of series8827IN-2-0of Kohler make as perdirection of Engineer in charge. |
| 4 | Providing wash basin semi-recessed lavatory with single faucet hole o white colour of series K-72907 K-1-0 of Kohler make but excluding the cost of fittings etc. complete as per direction of Engineer in charge. |
| 5 | Providing 3 hole basin mixer code ARC-87191 with popup waste system of Jaguar make complete as per direction of Engineer-in-charge. |
| 6 | Providing single control faucet with drain in Chrome polished of K-72275IN-4CP ofkohler make as per direction of Engineer in Charge. |
| 7 | ProvidingC.P. brass CANDIDE Recessed bath and shower faucet trim with lever handle and diverter button of K-23971 IN 4FP-CP of Kohler make as per direction of Engineer in charge. |
| 8 | Providing Single lever kitchen sink mixer ORP 10173BPM with swinging spout (table mounted) with 450 mm long braided hose of Jaguar make as per direction of Engineer-in-charge. |
| 9 | Providing CP Brass Over Head shower 203mm round Katalyst rainhead without Arm ofSeries K-73198IN-CPof Kohler make etc complete as per direction of Engineer in Charge. |
| 10 | Providing C.P. Brass Spout of complementry bath spout without divertor ofK-10385 IN-CP of Kohler make etc complete as per direction of Engineer in charge. |
| 11 | Providing ComplementryC.P. bottleTrap of Kohlermake of series 7314IN - CP etc. complete as per direction of Engineer in charge. |
| 12 | Providing C.P. Brass Complementry small angle valve with wall flange cap of series K-11568 IN-7-CP of Kohler make etc complete as per direction of Engineer in charge. |
| 13 | Providing 3 hole bath filler with diverter and hand shower in polished chrome K-37312IN-B4CP for Bathtub accessiories of Kohler make complete as per direction of Engineer in charge. |
| 14 | Providing Bath drain in polished chrome K-17295T-CPfor Bathtub accessiories of Kohler make complete as per direction of Engineer in charge. |
| 15 | Providing Complimentry basic health faucet with metal hose and holder in polished chrome K-12925IN-CP of kohler make etc complete as per direction of Engineer in Charge. |
| 16 | Providing PVC side fill valve SKU Code 1045096 of Kohler make etc. complete as per direction of Engineer in charge. |
| 17 | Providing PVC flush valve Assembly SKU Code 1045097 of Kohler make etc. complete as per direction of Engineer in charge. |
| 18 | Providing 1212372-U-CP Divertor ASSY of Kohler make complete as per direction of Engineer-in-charge |
| 19 | Providing Wall hung toilet with Quiet-close™ seat and cover in white seat K-8752IN-S-0 & K-8827IN-2-0 of kohler etc. complete as per direction of Engineer in Charge. |
| 20 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : --For fixed portion.(a) Powder coated aluminium(minimumthickness of powder coating50 micron). |
| 21 | Providing & fixing 12mm thick frameless toughened glass for courtyard & balcony railing of approved brand & manufacture i/c all necessary fitting complete as per direction of Engineer-in-charge. |
| 22 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). (a) Size of tile 600mm*600mm |
| 23 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).(a) Size of tile 600mm*600mm |
| 24 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 25 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete |
| 26 | Providing and fixing beveled edge mirror of superior glass (of approved quality) complete ground fixed with C.P. brass screws and washers complete. |
| 27 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).(a) Kiln seasoned and chemically treated hollock wood |
| 28 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :Kiln seasoned and chemically treated hollock wood. (a) 50 x 20 mm. |
| 29 | Disposalofbuildingrubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading toapproved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 30 | Providing M.D.F. laminated threshold door profile (Ramp edge profile) of size 45 x 12 mmcomplete as per direction of engineer-in-charge |
| 31 | Providing M.D.F. laminated Skirting of size 60 x 15 mm for laminated flooring complete as per direction of engineer-in-charge |
| 32 | Providing and fixing 19mm thick factory pressed readymade and ready to use one side decorative lamination and other side balancing lamination of BWR marine grade ply as per IS 710 with face veneer 0.35mm and core veneer 1.75mm with density of 700 Kg/Cum and constructed with 080mm thick HPL as per IS 2046 on one side of Greenply, Century Ply, Virgo Plywood,Duro in partitions boxes, shevels, racks, almirah, cupboard shutter, cupboard and drawer etc. including necessary nails, screws etc. complete as per direction of Engineer-in-charge. |
| 33 | Providingauto closing spring loaded hinges of HETTICH/EBCO or equivalent make of approved brand to cupboard shutters with full theaded steel screws including making necessary recess in panel board and finished etc. complete as per direction of Engineer-in-charge. |
| 34 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35mm thick including ISI marked stainless steel butt hinges with necessary screws. |
| 35 | Wall Painting with acrylic Emulsion paint having VOC (volatile organic compound) content less than 50gm/lit. of approved brand & manufacture, including applying additional coats wherever required to achieve even shade & colour. |
| 36 | One Coat |
| 37 | (ii) Two Coat |
| 38 | Melamine polishing on wood work (one or more coat). |
| 39 | Repair to plaster of thickness 12mm to 20mm in patches of area 2.5sqm & under, including cutting the patch in proper shape, raking out joints & preparing & plastering the surface of the walls complete, including disposed of rubbish to the dumping ground, all complete as per direction of Engineer-in-charge. With cement mortar 1:4 (1 cement : 4 fine sand) |
| 40 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 41 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. Water thinnable cement primer |
| 42 | Engaging team of skilled / semi-skilled and unskilled labour for day to day repair maintenance and attending internal complaints of fitting, fixtures, services of 45 staff quarters (30 flats 3 Bed Rooms, 10 Flats of 4 Bed Room and 5 Flats of 5 Bed Rooms) at Commonwealth Games Village in Tower No. 16, 18 and Tower No. 20 including tools, plants etc. required for labour (but not including the cost of materials etc. required for attending day to day complaint) cost of materials and fitting as per requirement at the time of attending complaint will be paid separately. |
| 43 | Masson (Avg.) |
| 44 | Carpenter (Avg.) |
| 45 | Fitter (Avg.) |
| 46 | Unskilled labour beldar/coolie/helper with masson |
| 47 | Unskilled labour beldar/coolie/helper with carpenter |
| 48 | Unskilled labor beldar/coolie/helper with fitter |
| 49 | White washer/ Painter |
| 50 | Supply of material for day to day maintenance work |
| 51 | Supplying Fine Sand at site |
| 52 | Supplying Coares Sand at site |
| 53 | Supplying OPC cement Grade-43 at site |
| 54 | Supplying of stone aggregate 20mm nominal size at site. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
