Water Resources Department-WRD has published Repair And Renovation Of Administrative Building Of Rengali Dam Division At Rengali Dam Site Repair And Renovation Of Building. Submission Date for this Tender is 27-12-2021. Building Work Tenders in Rengali Dam Site Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling and removing old 2.5 cm thick A.S flooring including stacking the useful materials for reuse and removing the debris and disposal the same within initial lead and lift etc. completebut excluding GSTas per the direction of the Engineer-in-charge. |
| 2 | Providing and laying in position average 25mm thick A.S flooring in cement concrete (1:2:4 ) using 12mm & down graded crusher broken hard granite chips of approved quality from approved quarry free from weathered skin , laying, punning, watering & curing, including cost, conveyance, royalty etc completebut excluding GST as per the direction of the Engineer-in-charge. |
| 3 | Removing old lime or cement plaster from walls including racking out joints 12mm deep and removing the debris and disposal the same within initial lead and lift etc. complete but excluding GST as per the direction of the Engineer-in-charge. |
| 4 | Providing and laying 12mm thick C.P.in C.M.(1:6)finished smooth over stone/brick masonry work including curing and usinggood quality screened sand from approved quarry including cost, conveyance, royality,with all lead, lift and delift etc. complete but excluding GSTas per the direction of the Engineer -in- charge. (measurement will be taken on finished and approved surface ) |
| 5 | Supplying fitting & fixing of vitrified floor tile of size 600mm x 600mm of approved make conforming to IS: 13755 laid on 20mm thick cement mortar (1:4) jointed with neat cement slurry and filling joints with white cement colour pigments of approved make and quality icluding cost of all materials labourcess royalty watering curing etc complete but excluding GST as per the direction of the Engineer-in-Charge |
| 6 | Providing, Fitting and fixing false ceiling of aluminium analysed T-section no-3215 with 2`-0`` center to center L-section no-1705 upto 15 microns on four walls to be fixed by means of steel screws and PVC plug and aluminium grid 2`-0`` x2`-0`` suspended from ceiling etc complete including all materials, labour, T&P,but excluding GST as directed by the Engineer-in-Charge |
| 7 | Providing all materials labour T&P fitting and fixing of MS pannelled window double leaved shutter with MS frame and grill. Over all size including frame- 1220mm (H) X 910mm (W) made out of the following materials conforming to relevant I.S.S. Frame- 35X35X6mm MS angle. Shutter style- Top and bottom rail 25X25X3mm MS angle. Window pannel-1.0 mm CR sheet. Panel stiffners covering width of each leaf- 19X5mm MS flat 2 nos on each leaf. Hinges-size 100 mm 4 nos (2 nos on each side) bought out as per I.S.S. Hold fast- 35X35X6mm MS angle 100mm length bifurcated tip 2 nos (on each side). Handle-19X5mm MS flat 2 nos. fabricated (in side). Tower bolt-4 nos bought out as per I.S.S. Horizontal grills-12mm MS round at 100mm spacing. (Approximate weight 39 kg) including cost, conveyance,etc complete but excluding GST as per the direction of the Engineer-in-charge. |
| 8 | Providing all materias labour T&P fitting and fixing of double leafpanelled MS Door shutters with M.S frame over all size including frame 1980mm (H) x 1070mm (W) made out of the following materials conforming to relevant I.S.S. Frame- 35X35X6mm MS angle, shutter style- top and bottom rail 25X25X3mm MS angle. Door pannel-1.0 mm C.R sheet. Panel stiffners covering width of each leaf- 19X5mm, MS flat 3 nos on each leaf, Hinges sizes- 100 mm 6 nos (3 nos on each side) bought out as per I.S.S. Hold fast- 35X35X6mm MS angle 175mm length bifurcated at the tip 3 nos on each side. Handle-19X5mm MS flat fabricated- 4 nos. Aldrop- 2 nos. bought out as per I.S.S tower bolt- 2 nos. bought out as per I.S.S. (Approximate weight-54 kg) including cost, conveyance etc complete but excluding GST as per the direction of the Engineer-in-charge. |
| 9 | Providing and applying distempering two coat to walls with distemperofapprovedshade on old work to give an even shade with all heights including cost of scaffoldingwith al leads, lifts and delifts to proper finishing including cost, conveyance, of all materialsetc. complete but excluding GST as per the specification and direction of Engineer-in-charge |
| 10 | Providing and finishing surface of walls with cement based wall putty (Water Based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding with cost of all materials tases labour T&P etc complete but excluding GST as per the direction of Engineer in Chage |
| 11 | Providing and applyingtwo coat to walls with plastic emulsion paint ofapprovedshade on old/new work to give an even shade with all heights including cost of scaffoldingwith al leads, lifts and delifts to proper finishing including cost, conveyance, of all materialsetc. complete but excluding GST as per the specification and direction of Engineer-in-charge |
| 12 | Providing fitting and fixing up partition walling with alluminium anodised section No-9210 and 9207 as single groove respectively as horizontal and vertical member and section 4660 as tapped clip and jointing angle No-1855 including cost of all material labour T&P etc complete but excluding GST or as directed by the Engineer-in-Charge |
| 13 | Providing all material, labour, T&P and fitting and fixing of Gents Urinal with all its accessories etc complete but Excluding GST and as per the direction of Engineer-in-charge |
| 14 | Providing all material, labour, T&P and fitting and fixing of Wash Hand Basin all its accessories etc complete but Excluding GST and as per the direction of Engineer-in-charge |
| 15 | Providing all material, labour, T&P and fitting and fixing of Sintex water tank 500 litre all its accessories etc complete but Excluding GST and as per the direction of Engineer-in-charge |
| 16 | Providing all material, labour, T&P and fitting and fixing of Pre Laminated Door andall its accessories etc complete but Excluding GST and as per the direction of Engineer-in-charge |
| 17 | Providing all material, labour, T&P and fitting and fixing of PVC Door andall its accessories etc complete but Excluding GST and as per the direction of Engineer-in-charge |
| 18 | Providing all material, labour, T&P and fitting and fixing of 50mm dia PVC Pipe andall its accessories etc complete but Excluding GST and as per the direction of Engineer-in-charge |
| 19 | Providing all material Labour T&P for Colour washing two coats with shell lime and colouring materials of approved shade after thoroughly cleaning the surface incluiding cost,conveyance etc complete but excluding GST as per the direction of the Engineer-in-charge. |
| 20 | Providing and applyingtwo coat to walls with weather coat paint ofapprovedshade on old/new work to give an even shade with all heights including cost of scaffoldingwith al leads, lifts and delifts to proper finishing including cost, conveyance, of all materialsetc. complete but excluding GST as per the specification and direction of Engineer-in-charge |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
