|
| 1 | Dismantling timber scantling 40 Sq. cm and over in section, in any position of unframed / framed work complete all as specified and as directed. |
| 2 | Supply andfixing of roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (web, tee, angle, channel or flat sections) including distance pieces, cleats etc fixed in position,conforming to Fe-410(Gde 250), complete all as specified and as directed. |
| 3 | Supply and fixing of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete including dismantling existing asbestos cement (corrugated, semi corrugated, etc.) sheets any type, gauge, thicknessetc complete all as specified and directed. |
| 4 | Supply and fixing of Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete including dismantling existing asbestos cement (corrugated, semi corrugated, etc.) sheets any type, gauge, thicknessetc complete all as specified and directed. |
| 5 | Material andlabour for 6 mm thick Asbestos Cement sheet, corrugated, or semi corrugated sheets in roofs, walls etc. and fixed with L hook or Cranked bolts including dismantling old asbestos cement corrugated or semi-corrugated sheets, complete all as specified and directed. |
| 6 | Material andlabour for Asbestos Cement two piece unserrated ridge 6 mm thick fixed with L hook or Cranked bolts including dismantling oldAC ridges etc, complete all as specified and directed. |
| 7 | Material andlabour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 8 | Material and labour for brick work with sub class ‘B’ bricks, straight or curved on plain exceeding 6 metre mean radius in cement mortar (1:6) including demolition of brick work built in cement mortar including demolition of old brick/stone masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed. |
| 9 | Material and labour for brick work (except bricks) straight or curved on plan exceeding 6 metre mean radius built in CM 1:6 (old size brick)including demolition of old brick /stone masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed. |
| 10 | Supply and fixingAnodised aluminium snap grid frame work for false ceiling grid 605 x 605 mm fixed with Hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5mm dia. 40mm long with and including supply and fixingGypsum Board 12mm thick as in ceilings fixed with screws as per manufactures instructions including dismantling false ceiling tiles with grid of any type including frame work complete all as specified all as specified. |
| 11 | Resecuring existing grid of false ceiling in patches of any type by way of fixing hangers (GI wire of 4mm dia) to be fixed by consisting of HLS sleeves anchor fastenerof thread size 6.5 mm x 25/5 with soffit cleat made of galvanised steel of size 27 mm x 37 mm x 25 mm x 1.6 mm and level clip of dimensions of 85 mm x30 mm x .8 mm at 600 x 1200 intervals and fixing of false ceiling tiles matching with same colour / type as existing at site and as directed.NOTE: - Supply of false ceiling tiles will be measured and paid seperately. |
| 12 | Supply only false ceiling \"TEGULAR EDGE TILES\" of perforated with fleece 595 x 595 x 0.5 mm having galvanizing of 100 gms/Sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes in global white Powder Coated with 60-70 Micron front coating laid, humidity resistance (RH) of 100%, light reflection of 62%, backing of rock wool pads to have max NRC 0.8 including PVC clips to hold the ceiling tile, complete all as per manufacturer instructions, complete all as specified and directed. |
| 13 | Supply only 4mm thick plain non-asbestos cement building boards of size (600 x 600) mm (fixed as in existing false ceiling colour matching withexisting false ceiling complete all as per the manfacturer\"s instructions complete all as specified and directed. |
| 14 | Supply only 600 mm x 600 mm x 15/16 mm thick mineral fibre ceiling tiles, fine texture, ordinary type fixed as in existing false ceiling matching with colour complete all as per the manfacturer\"s instructions complete all as specified and directed. |
| 15 | Disconnecting existing tanks exc 250 and n.exc 500 ltrs, setting aside for repairs, cleaning etc and hoisting if required, reconnecting and refixing in positiion etc complete all as specified and directed. |
| 16 | Description all as per item No 15.00 above but capacity exc 500 ltrs but not exceeding 1000 ltrs complete all as specified and directed. |
| 17 | Dismantling of brick tiles or terracing tiles in single layers on roofs complete all as specified and directed. |
| 18 | Demolition of mud phuska in roofs, any thickness plaster and leaping (Whether full thickness removed or only a part thereof) complete all as specified and directed. |
| 19 | Material and labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. andapplying neat cement slurry @ 3.00 kg /sqm, complete all as specified and directed. |
| 20 | Material and labour for 50 mm thick averaging PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in roof padding, levelling course, including providing neat cement slurry @ 3Kg/Sqm including preparing slab surface with wire brushing complete and finishing top surface of PCC rough and even to received the bedding layer including necessary form work and bedding layer of 10 mm thick cement plaster in CM 1:4 using WPC @2% by the weight of cement on RCC roof slab including cleaning of existing complete all specified and directed. |
| 21 | Material and labour for APP polymeric water proofing treatement to roof using membrane minimum 3 mm thick and weighting not less than 3.6 kg/sqm , black finish reinforced with non-woven polyster matt (Weight not less than 150 gms/Sqm) with thermo fusible finish laid by force application after applying compatible bitumen primer at the rate of 0.40 Ltr per Sqm, by the same membrane manufacturer of density 0.87 to 0.89 kg/ltr at 25\" C temprature and viscosity 70-160 cps over the primer coat, torching over laps with a propane orbutane gas torch with a over lap of 100 mm at the side and 150 mm at the ends and sealing including a tack coat of hot blown bitumen 85/25 @ 1.2 Kg/Sqm below APP and two coats water proofing paint with aluminium finish on top of laid APP surfaces including preparation of surface complete all as specified and directed.NOTES : - (i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing.(ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years. However contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor\" risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. Contractor\"s quoted rate for this item shall deemed to be inclusive of this aspect. |
| 22 | Material and labour for 40mm thick brick tiles over and including 15 mm thick bedding layer in cement mortar (1:6) jointed and pointed in CM (1:3) mixed with 5% of crude oil by weight of cement complete all specified and directed. |
| 23 | Material and labour for 40mm thick brick tiles (Except brick tiles) over and including 15 mm thick bedding layer in cement mortar (1:6) jointed and pointed in CM (1:3) mixed with 5% of crude oil by weight of cement complete all specified and directed. |
| 24 | Material and Labour for plain cement concrete 1:2:4 type B-1 (using 20 mm graded mechanically crushed stone aggregate) asroof kerbs or mud stops and the like, rounded or chamfered on edges complete including demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 25 | Material and labour for providing, cement concrete on roof as in PCC Sumps for rain water pipes , type B1 1:2:4 (12.5 mm graded aggregate) including demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 26 | Supply and fixing of water storage tank of 500 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed andsuitable for iron pipe 20 mm bore including taking down of old tank of any descrption and removal from site complete all as specified and directed. Note:- Tank shall be white and make of tank shall be engraved on the tank. |
| 27 | Supply and fixing of water storage tank of 1000 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed andsuitable for iron pipe 20 mm bore including taking down of old tank of any descrption and removal from site complete all as specified and directed. Note:- Tank shall be white and make of tank shall be engraved on the tank. |
| 28 | Supply and fixing in repair 15 mm dia gun metal, globe or gate valve with Iron wheel head screwed both ends for Iron Pipe and fixed complete all as specified and directed. |
| 29 | Supply and fixing in repair 20 mm dia gun metal, globe or gate valve with Iron wheel head screwed both ends for Iron Pipe and fixed complete all as specified and directed. |
| 30 | Supply and fixing in repair of GI tubing, ISI Marked, 15mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required, including taking down of old tubing as existing at site and removal, complete all as specified and as directed. |
| 31 | Supply and fixing in repair of GI tubing, ISI Marked, 20mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required, including taking down of old tubing as existing at site and removal, complete all as specified and as directed. |
| 32 | Refixing old serviceable steel water tubing of 15 mm bore, in new or old position,any grade, including Supply and fixing new fittings as required, fixed to walls and ceilings or laying in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed. |
| 33 | Refixing old serviceable steel water tubing of 20 mm bore, in new or old position,any grade, including Supply and fixing new fittings as required, fixed to walls and ceilings or laying in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed. |
| 34 | Material and labour for Preparation of old painted steel and iron surfaces surfaces of any description, not otherwise described, over 10cm width or girth and applying with one coats of synthetic enamel painting complete all as specified and as directed. |
| 35 | Supply and fixing of 16to 18 mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone, size not exceeding 0.25 sqm, fixed on with and including backing coat 10 mm thick in cement mortar 1:4, set ,jointed & pointedwith grey cement slurry or with adhesive as per manufacturer\"s instructions mixed with pigment to match the shade,making V groove at top and bottom of stone , drilling holes for hold fastener applying silicon treatment including rubbing& polishing to achieve mirror finish including dismantiling existing stone slab of any description complete all as specified and directed. |
| 36 | Demolition of lime concrete or cement conrete of any description and in any position as of sunken portion complete all as specified and directed. |
| 37 | Material and labour for rendering15mm thick in cement mortar 1:3, over cement concrete slab while the surface of concrete is greenusing water proofing compound @ 3% by weight of cement , surface is to be finished even and smooth without using extra cement including Applying evenly a tack coat of industrial bitumen 85/25 @ 1.20 Kg/Sqm over concrete surface complete all as specified and directed.(NOTE: - WPC shall be measured and paid separately). |
| 38 | Material and labour for lime concrete with 40 mm gradedaggregate, using lime mortar 1:3as in sunken portion at first/second floor, complete all as specified and directed. |
| 39 | Supply only integral water proofing compound, complete all as specified and as directed. |
| 40 | Material andLabour for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregate) as in sub base to floor, complete all as specified and as directed. |
| 41 | Material & Labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick, (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and includingcement screed bed 15mm thick in screed bed (1:4) base and removing the rubbish outsidethe defence land complete all as specified and directed. |
| 42 | Material & Labour forcoloured glazed ceramic tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick in vertical surfacesand jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement plaster 1:3 including dismantling of old floor or wall tiling including cement mortar bedding and removing the rubbish outsidethe defence land complete all as specified and as directed. |
| 43 | Supply and fixing (in repair) for vitreous china squatting pan of orrisa pattern size 580 x 440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and foot rests of anypattern complete including provision of lime concrete bed and connection to flush pipe excluding flushing cistern, flush pipe and bracket and making good the disturbed area complete all as specified and directed. |
| 44 | Supply and fixed(in repair) vitreous china wash down water closet pedestal pattern, coloured, with and including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap,plastic water closet seat cover closed pattern with mild steel chromium plated hinges & jet nozzle complete all as specified and directed. |
| 45 | Supply and fixing (in repair), 10 litre capacity virgin polypropylene cistern, white, ISI marked, coloured at low level complete including 45 cm long PVC connection, PVC bend/flush pipe and making good the disturbed surfaces in cement mortar (1:3) to match with the existing surface, complete all as specified and directed. |
| 46 | Supply and fixing(in repair) bib tap screwed down high pressure, cast copper alloy,fancy type, chromium plated, ISI marked, with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified and directed.(NOTE: - Weight of bib tap shall not be less than 0.575 Kg) |
| 47 | Supply and fixing in repair 110 mm dia UPVC, soil waste drain pipe, type ‘B’ ,conforming toIS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in trenches or in floors, complete, all as specified and as directed. (Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985) |
| 48 | Supply and fixing in repair 75 mm dia UPVC soil, waste, drain pipe, type ‘B’, conforming to IS 13592-1992, single socketed, in any length, with rubber rings joints or jointed with solvent cement, laid in trenches or in floor complete all as specified and directed. Note- Rubber rings for pipes and fittings shall conform to IS 5382-1985. |
| 49 | Supply and fixing in repair 110 mm bore UPVC (SWR) plain bend any radius including jointing with solvent cement, complete all as specified.(Note- UPVCbends shall be confirm to BS 4515 DIN 19531 and DIN 19534) |
| 50 | Supply and fixing in repair 75 mm dia of outlet, PVC (SWR) floor trap plain with grating including jointing with solvent cement, complete, all as specified and as directed.(Note- UPVCfittings shall be conforming to BS 4515 DIN 19531 and DIN 19534) |
| 51 | Supply and fixing in repair 75 mm bore UPVC (SWR) plain bend any radius including jointing with solvent cement, complete all as specified.(Note- UPVCbends shall be confirm to BS 4515 DIN 19531 and DIN 19534) |
| 52 | Material and labour for 15 mm thick rendering in cement mortar (1:6) on brick or concrete surface of any description, finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 53 | Material and labour for preparation of new plastered surfaces of wall and applying two coats of snowcem (cement base paint) over a coat of primer on walls complete all as specified and directed. |
| 54 | Note:-Amount of credit ofRs. 71,881.00 for retrieved materials is mentioned in Schedule of Credit Page No. 19 of tender documents in pdf form which will be deducted offline while acceptance of tender. |
