Department Of Sports And Youth Affairs has published Supply Gym Equipments For Sindhudurg District Supply Gym Equipmetns For Sindhudurg District , Multi Gym Units , 7 Station Multy Gym Unit Chest Press Cum Shoulder Press - 75 Kg Latpull Down-75 Kg Single Hand Pulley-50 Kgincline Leg Press-90 Kg Leg Raiser. Submission Date for this Tender is 18-12-2021. Gym Equipment Tenders in Sindhudurg Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 15-Dec-2021 | EXMPTION IN TENDER FEE AND EMD | Fee | 18-12-2021 |
| Sl. No. | Item Description |
| 1 | MULTI GYM UNITS |
| 2 | 7 STATION MULTY GYM UNIT CHEST PRESS CUM SHOULDER PRESS - 75 Kg LATPULL DOWN-75 Kg SINGLE HAND PULLEY-50 KgINCLINE LEG PRESS-90 Kg LEG RAISER WITH DIPPING ABDOMEN BOARD TWISTER |
| 3 | 6 STATION MULTY GYM UNIT CHEST PRESS CUM SHOULDER PRESS - 75 Kg LATPULL DOWN-75 Kg SINGLE HAND PULLEY - 50 Kg LEG CURL & LEG EXTENSION - 70 Kg LEG RAISER WITH DIPPING ABDOMEN BOARD |
| 4 | 5 STATION MULTY GYM UNIT CHEST PRESS CUM SHOULDER PRESS - 75 Kg LATPULL DOWN-75 Kg LEG CURL & LEG EXTENSION - 70 Kg LEG RAISER WITH DIPPING TWISTER |
| 5 | SINGLE STATION GYM UNIT |
| 6 | WRIST CONDITIONER |
| 7 | PREACHER CURL MACHINE |
| 8 | LAT PULL DOWN |
| 9 | ROWING PULLEY |
| 10 | CHEST PRESS |
| 11 | MULTI FUNCTIONAL TRAINER |
| 12 | PEC FLY WITH REAR DELT |
| 13 | SHOULDER PRESS |
| 14 | STANDING CALF MACHINE |
| 15 | INCLINE LEG PRESS |
| 16 | LEG EXTENSION AND LEG CURL COMBO |
| 17 | HACK MACHINE |
| 18 | MULTI HIP |
| 19 | ABDOMEN CRUNCH |
| 20 | ASSISTED CHIN-UP |
| 21 | HYPER EXTENSION |
| 22 | BENT OVER ROWER (T BAR] |
| 23 | BENCH PRESS BENCH |
| 24 | INCLINE BENCH |
| 25 | DECLINE BENCH |
| 26 | ADJUSTABLE BENCH |
| 27 | DUAL AXIS INCLINE PRESS |
| 28 | DUAL AXIS BENCH PRESS |
| 29 | DUAL AXIS DECLINE PRESS |
| 30 | 45 DEGREE LEG PRESS |
| 31 | ABDOMEN BENCH |
| 32 | VERTICAL KNEE RAISER |
| 33 | TWISTER |
| 34 | 3-DIMENSIONAL SMITH MACHINE |
| 35 | PUSHUP STAND |
| 36 | PLAIN BENCH |
| 37 | SMITH BENCH |
| 38 | RACK FOR 20 DUMBELLS WITH BAR RACK |
| 39 | ARC DUMBELL RACK |
| 40 | WEIGHT PLATE TREE RACK |
| 41 | ABDOMEN BOARD WITH LADDER |
| 42 | DOUBLE TWISTER |
| 43 | SEATED CALF BENCH |
| 44 | FREE-WEIGHT STATION GYM UNIT |
| 45 | Shoulder Press (Free Weight): Dimensions: (L X W X H) 1300X1260X1350mm. Main Frame: ?114x3 mm thick M.S pipe and subordinate tube is of ?88x3.0 large thickness M.S pipe. Handle: is made of ?88 x3 mm thick Pipe and ?25 mm round M.S bright bar in bending design. All remaining frame is made by ?88x3mm thick MS pipe. Weight plates: Rubberized moulding round weight plates are used. Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel ?48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations. Bearing: Lubricated high grade6305 "2RS"steel ball bearing. Base plate: is OD166, ID 116, and 6 mm thick. Pins: are made up of M.S bright bar. Bearing bushes: ?75mm OD seamless pipe. Weight plate mounting pipe is of 048 mm MS pipe. Padding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color. Seat Frame: made up of hard chrome plated mild steel 048 DIA round pipe. Hardware:All hardware"s uses button heads bolts and nuts made up of high tensile steel. Hand grips: Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance. Spring knob: mechanism is used for seat height adjustment. Closing caps: are of PP/NYLON/HDPE material. Laser cutting: profiles of 6mm and 4mm thick M.S sheet are used for connecting subordinates with each other. Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handles for noise less operations. Powders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination. Safety Instructions and Exercise chart on machine - start & finish position chart stick on 5mmthick mild steel plate. |
| 46 | Front Pull Down (Free Weight): Dimensions: (L X W X H) 1230X1120X1860mm. Main Frame: ?114 x3 mm thick M.S pipe and subordinate tube is of ?88x3.0 large thickness M.S pipe. Handle frame shall be made using bending design. Handle: is made of ?88x3 mm thick Pipe and ?25 mm round M.S bright bar in bending. All remaining frame is made by 088 x3mm thick MS pipe. Weight plates: Rubberized moulding round weight plates are used. Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel ?48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations. Bearing: Lubricated high grade 6305"2RS‘steel ball bearing. Base plate Base plate is OD 166, ID 116, and 6 mm thick. Pins: Made up of M.S bright bar. Bearing bushes:- ?75mm OD seamless pipe. Padding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color. Foam Roller; Foam roller made up of high density composed foam and covered with stitched heavy vinyl cover, and their ends are covered with aluminum or mild steel chrome plated caps and M8 Allen bolt. Hardware: All hardware"s uses button heads bolts and nuts made up of high tensile steel. Hand grips: Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance. Spring knob: Mechanism is used for seat height adjustment. Closing caps: All open ends should close using closing caps of PP/NYLON/HDPE material. Laser cutting: Laser cutting profiles of 6mm and 4mm thick M. S sheet are used for connecting subordinates with each other. Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handles for noise less operations. Powders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination. Safety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate |
| 47 | Seated Dip (Free Weight): Dimensions: (L X W X H) 1750X1010X890mm. Main Frame :?114 x3mm thick M.S pipe made in bending design and subordinate tube is of ?88x3mm thickness M.S pipe. Handle and plate holder frame, bottom frame and front are made in bending design by using ?88x3mm thickness M.S pipe. Handle: is made of ?88 x3 mm thick Pipe and ?25 mm round M.S bright bar in bending design. Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel ?48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm wall thickness for free weight noiseless operations. Bearing: Lubricated high grade 6305 "2RS" steel ball bearing. Base plates OD 166, ID 116, and 6 mm thick And OD 130,1077, 6mm thick M.S round laser cut profile. Pins: are made up of M.S bright bar. Bearing bushes: ?75mm OD seamless pipe. Weight plate mounting pipe is of ?48 mm MS pipe. Weight plates: Rubberized moulding round weight plates are used. Padding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color. Foam Roller; Foam roller made up of high density composed foam and covered with stitched heavy vinyl cover, and their ends are covered with aluminum or mild steel chrome plated caps and M8 Allen bolt. Hardware All hardware"s uses button heads bolts and nuts made up of high tensile steel. Hand grips :Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance. Spring knob: mechanism is used for seat height adjustment. Closing caps: AII open ends should close using closing caps of PP/NYLON/HDPE material. Laser cutting: Profiles of 6mm and 4mm thick .M.S sheet are used for connecting subordinates with each other. Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handles for noise less operations. Powders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination. Safety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate. |
| 48 | Preacher Curl (Free Weight): Dimensions: (LX W X H) 1210X1360X14B0mm. Main Frame:?88 x3 mm thick M.S pipe and subordinate tube is of ?88x3mm large thickness M.S pipe in bending design. Handle: Handle is made of ?88 x3 mm thick M.S pipe duly bending design and ?25 mm round M.S bright bar. Weight plates: Rubberized moulding round weight plates are used. Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel ?48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring QD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations. Bearing: Lubricated high grade 6305 "2RS" steel bail bearing. Base plate: Base plate is OD130, ID 90, and 6 mm thick. Pins: are made up of M.S bright bar. Bearing bushes: ?75mm OD seamless pipe. Padding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color. Hardware : All hardware"s uses button heads bolts and nuts made up of high tensile steel. Cables; 6mm thick nylon coated cables with aluminum crimping at one end to attach and hold handle. One additional cable set to be supplied. Hand grips: Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance. Spring knob: mechanism is used for seat height adjustment. Closing caps : All open ends should dose using closing caps of PP/NYLON/HDPE material. Laser cutting: profiles of 8mm, 6mm and 4mm thick M. S sheet are used for connecting subordinates with each other. Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handles for noise less operations. Powders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination. Safety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate |
| 49 | Row (Free Weight): Dimensions: (L X W X H) 1375X1570X1530mm. Main Frame: ?114 x3 mm thick M.S pipe and subordinate tube is of ?88x3mm large thickness M.S pipe. Handle main and base frame, bottom frame are made in bending design using of ?88x3mm thick M.S pipe. Handle: is made of ?88 x3 mm thick Pipe bending design and ?25 mm round M.S bright bar. All remaining frame is made by ? 88 x3mm thick MS pipe. Weight plates: Rubberized = moulding round weight plates are used. Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel ?48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations. Bearing: Lubricated high grade 6305 ^RS" steel ball bearing. Base plate :is 00166,10 116, and 6 mm thick. Pins: are made up of M.S bright bar. Bearing bushes : ? 75mm OD seamless pipe. Weight plate mounting pipe is of 048 mm MS pipe. Padding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color. Hardware : All hardware"s uses button heads bolts and nuts made up of high tensile steel. Hand grips :Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long,endurance. Spring knob: mechanism is used for seat height adjustment. Closing caps-.All open ends should close using closing caps of PP/NYLON/HDPE material. Laser cutting: profiles of 6mm and 4mm thick .M.S sheet are used for connecting subordinates with each other. Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handles for noise less operations. Powders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination. Safety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate. |
| 50 | Calf Raise (Free Weight): Dimensions: (t X W X H) 1470X735X92Smm. Main Frame: ?114x3 mm thick M.S pipe and subordinate tube is of ?88x3mm large thickness M.S pipe. Bottom frame, seat frame, thighs locking frame are made in bending design ?88x3mmM.S. Pipe All remaining frame is made by ?88 x3mm thickness M.S Pipe. Foot Rest: foot rest Is made using heavy duty 100 x 50 x 2.5mm thick capsule tube. Weight plates: Rubberized moulding round weight plates are used. Weight Plates Holder with spring lock and spare weights holder, is made by hard chrome plated mild steel ?48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations. Bearing: Lubricated high grade 6305 ‘2RS1 steel ball bearing. Base plate : is OD 166, ID 116, and 6 mm thick. Pins: are made up of M.S bright bar. Bearing bushes : ? 75mm OD seamless pipe. Padding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color. Hardware All hardware"s uses button heads bolts and nuts made up of high tensile steel. Hand grips :Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance. Spring knob: mechanism is used for seat height adjustment. Closing caps: All open ends should close using closing caps of PP/NYION/HDPE material. Laser cutting: profiles of 8 mm 6mm and 4mm thick .M.S sheet are used for connecting subordinates with each other. Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handles for noise less operations. Powders Coating: All components are chemically treated to seat exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination. Safety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate. |
| 51 | Kneeling Leg Curl (Free Weight): Dimensions: (L X W X H) 1270X1430X1330mm. Main Frame:?114x3 mm thick M.S pipe in bending design and subordinate tube is of ?88x3 mm large thickness M.S pipe. Plate holder frame, front abdomen rest frame, knee rest frame and leg movement frame made in bending design using 088x3mm M.S pipe Handle: ?25 mm round M.S bright bar. Leg movement frame made of ?88 x3mm thick MS pipe. All remaining frame is made by ?88 x3mm thick MS pipe. Weight plates: Rubberized moulding round weight plates are used. Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel ?48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations. Bearing: lubricated high grade 6305 "2RS" steel ball bearing Bearing: Lubricated high grade "ZZ" steel ball bearing. Base plate :is OD 166, ID 116, and 6 mm thick. Pins: are made up of M.S bright bar. Bearing bushes : ? 75mm OD seamless pipe. Padding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color. Foam Roller; Foam roller made up of high density composed foam and covered with stitched heavy vinyl cover, and their ends are covered with aluminum or mild steel chrome plated caps and M8 Allen bolt. Hardware :All hardware"s uses button heads bolts and nuts made up of high tensile steel. Hand grips :Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum /pp/nylon caps with grub screw for long endurance. Spring knob: mechanism is used for seat height adjustment. Closing caps: All open ends should close using closing caps of PP/NYLON/HDPE material. Laser cutting profiles of 8 mm 6mm and 4mm thick .M.S sheet are used for connecting subordinates with each other. Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting paddle movement for noise less operations. Powders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination. Safety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate. |
| 52 | Leg Extension (Free Weight): Dimensions: (L X W X H) 1490X1500X1090mm. Main Frame:?114 x3 mm thick M.S pipe in bending design and subordinate tube is of ?88x3mm large thickness M.S pipe.00 Leg movement frame: is made of ?88 *3 mm and ?48 x3mm thick Pipe thick Pipe in bending design and ?25 mm round M.S bright bar. All remaining frame is made by 076 x3mm thick MS pipe. Weight plates: Rubberized moulding round weight plates are used. Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel 048 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID*48 mm with 10mm wall thickness for free weight noiseless operations. Bearing: Lubricated high grade 6305 "2RS" steel ball bearing Base plate :is OD 166, ID 116, and 6 mm thick. Pins: are made up of M.S bright bar. Bearing bushes : ? 75mm OD seamless pipe. Weight plate mounting pipe is of ?48 mm MS pipe. Padding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color. Foam Roller; Foam roller made up of high density composed foam and covered with stitched heavy vinyl cover, and their ends are covered with aluminum or mild steel chrome plated caps and M8 Allen bolt. Hardware: All hardware"s uses button heads bolts and nuts made up of high tensile steel. Spring knob: mechanism is used for seat height adjustment. Closing caps: All open ends should close using closing caps of PP/NYLON/HDPE material. Laser cutting: profiles of 8 mm 6mm and 4mm thick M.S sheet are used for connectingsubordinates with each other. Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting paddle movement for noise less operations. Powders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination. Safety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate. |
| 53 | 45 Degree leg press (Free Weight): Dimensions: (L X W X H) 2480X1240X1450mm. Main Frame:?114 x3 mm thick M.S pipe and subordinate tube is of ?88x3mm large thickness M.S pipe. Trolley movement main frame made in bending using ?114 x3 mm thick M.S pipe and Bottom frame in bending design made by ?88x3mm thickness M.S pipe. Trolley: trolley made 80x40x2.5mm thick capsule tube. Trolley guide bar made up of M.S 25 OD solid bright bar duly hard chrome plated. Trolley footrest made up of 5mm thick checkered plate duly powder coated finally covered 5mm thick heavy-duty rubber sheet. Trolley holder and safety rod is made up of 25mm OD solid M.S bright bar. Back Rest frame should be height adjustable using spring knob mechanism. Handle: made up of 25mm OD M.S bright bar in bending design. All remaining frame is made by ?88 x3mm thick. Weight plates: Rubberized moulding round weight plates are used. Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel ?48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations. Bearing: lubricated high-grade linear steel ball bearing 25 ID (Inner Diameter). Base plate: is OD 166, ID 116, and 6 mm thick. Pins: are made up of M.S bright bar. Bearing bushes :65x65mm mild steel square bar. Padding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color. Hardware: All hardware"s uses button heads bolts and nuts made up of high tensile steel. Hand grips :Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance. Spring knob: mechanism is used for seat height adjustment. Closing caps: All open ends should close using closing caps of PP/NYLON/HDPE material, Laser cutting-.profiles of 8 mm 6mm and 4mm thick M.S sheet are used for connecting subordinates with each other; Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Powders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination. Safety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate. |
| 54 | Decline Chest Press (Free Weight): Dimensions: (L X W X H) 1240X1400X1930mm, Main Frame: ?114 x3 mm thick M.S pipe and subordinate tube is of ?88x3mm large thickness M.S pipe. Top, Bottom, Back rest and handle frame should be in bending design is made of ?88 x 3 mm thick Pipe and handle025 mm round M.S bright bar in bending design. Weight plates: Rubberized moulding round weight plates are used. Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel ?48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations. Bearing: Lubricated high grade 6305 "2RS1 steel ball bearing Base plate: is OD 166, ID 116, and 6 mm thick. Pins: are made up of M.S bright bar. Bearing bushes: ? 75mm OD seamless pipe. Padding and Cushion; Seats and pads are made up of 3 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color. Hardware :All hardware"s uses button heads bolts and nuts made up of high tensile steel. Hand grips :Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance. Spring knob: mechanism is used for seat height adjustment. Closing caps: AII open ends should close using closing caps of PP/NYLON/HDPE material. Laser cutting; profiles of 8 mm 6mm and 4mm thick M.S sheet are used for connecting subordinates with each other. Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Powders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination. Safety Instructions and Exercise chart on machine:start & finish position chart stick on 5mm thick mild steel plate. |
| 55 | Abdominal Machine (Free Weight): Dimensions: (L X W X H) 1210X132SX1640mm. Main Frame:?88 x3 mm thick M.S pipe in bending design and subordinate tube is of ?60x3mm thickness M.S pipe. Back rest frame made up of ?88 x3 mm thick M.S pipe in bending design. Seat frame should have 180 Degree rotational. Handle: is made of ?25 mm round M.S bright bar. All remaining frame is made by ? 88 x3mm thick and ?60 x3mm thick MS pipe. Weight plates: Rubberized moulding round weight plates are used. Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild steel ?48 DIA pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations. Bearing: lubricated high grade 6305 "IRS" steel ball bearing Pins: are made up of M.S bright bar. Bearing bushes: ? 75mm OD seamless pipe. Weight plate mounting pipe is of 048 mm MS pipe. Padding and Cushion; Seats and pads are made up of 6 mm thick M.S plate with 2" inches of high-density foam and finally covered with completely stitched heavy vinyl cover in any color. Foam Roller; Foam roller made up of high density composed foam and covered with stitched heavy vinyl cover, and their ends are covered with aluminum or mild steel chrome plated caps and M8 Allen bolt. Hardware : All hardware"s uses button heads bolts and nuts made up of high tensile steel. Hand grips: Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance. Spring knob: mechanism is used for seat height adjustment. Closing caps: All open ends should close using closing caps of PP/NYLON/HDPE material. Laser cutting: profiles of 8 mm 6mm and 4mm thick M.S sheet are used for connecting subordinates with each other. Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handle for noise less operations. Powders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination. Safety Instructions and Exercise chart on machine - start & finish position chart stick on 5mm thick mild steel plate. |
| 56 | OTHER FITNESS GYM EQUIPMENTS |
| 57 | E-Z BAR 28 MM DIA WITH COLLORS (chrome plated) |
| 58 | E-Z BAR 50 MM DIA WITH COLLORS (chrome plated) |
| 59 | BARBELL BARS 28 MM DIA WITH COLLORS (chrome plated) |
| 60 | BARBELL BARS 50 MM DIA WITH COLLORS (chrome plated) |
| 61 | M.S HARD CHROME PLATED WEIGHT PLATES. |
| 62 | RUBBERIZED WEIGHT PLATE |
| 63 | M.S HARD CHROME PLATED DUMBBELLS. |
| 64 | RUBBERIZED DUMBBELLS |
| 65 | GYM MAT (GYMNASIUM MAT) |
| 66 | MIRROR FOR GYMNASIUMS |
| 67 | TRADEMILL - Commercial |
| 68 | TRADEMILL-Semi Commercial |
| 69 | ELLIPTICALS-Commercial |
| 70 | UPRIGHT BIKES - Commercial |
| 71 | RECUMBENT BIKE - Commercial |
| 72 | SPINE BIKE - Commercial |
| 73 | EXER CYCLE |
| 74 | IMPORTED DUAL MULTI - GYM UNIT |
| 75 | 4 Station Dual Multi Gym Chest Press Cum Shoulder Press-80 Kg Lat Cum Rowing - 80 kg Leg Extension Cum Prone Leg Curl - 75 Kg Bicep Cum Triceps - 75 Kg |
| 76 | IMPORTED SERIES SINGLE STATION |
| 77 | WRIST CONDITIONER - 50 Kg |
| 78 | PREACHER CURL MACHINE - 60 Kg |
| 79 | LAT PULL DOWN - 80 Kg |
| 80 | CHEST PRESS - 80 Kg |
| 81 | MULTI FUNCTIONAL TRAINER - 120 Kg |
| 82 | PEC FLY WITH REAR PELT - 80Kg |
| 83 | SHOULDER PRESS - 70 Kg |
| 84 | LEG EXTENSION & LEG CURL COMBO - 80 Kg |
| 85 | MULTI HIP- 60 Kg |
| 86 | ASSISTED CHIN-UP - 75 Kg |
| 87 | TRICEP |
| 88 | BENCH PRESS BENCH |
| 89 | INCLINE BENCH |
| 90 | DECLINE BENCH |
| 91 | ADJUSTABLE BENCH |
| 92 | 45 DEGREE LEG PRESS 7 |
| 93 | HACK WITH LEG PRESS |
| 94 | SMITH MACHINE |
| 95 | RACK FOR 20 DUMBELLS WITH BAR RACK |
| 96 | WEIGHT PLATE RACK |
| 97 | POWER CAGE |
| 98 | IMPORTED OTHER FITNESS EQUIPMENT - ANY INTERNATIONAL BRAND |
| 99 | E-Z BAR 50 MM DIA WITH COLLORS (chrome plated) |
| 100 | E-Z BAR 25 MM DIA WITH COLLORS (chrome plated) |
| 101 | BARBELL BARS 50 MM DIA WITH COLLORS (chrome plated) |
| 102 | BARBELL BARS 25 MM DIA WITH COLLORS (chrome plated) |
| 103 | M.S HARD CHROME PLATED WEIGHT PLATES. |
| 104 | RUBBERIZED WEIGHT PLATE |
| 105 | M.S HARD CHROME PLATED DUMBBELLS. |
| 106 | RUBBERIZED DUMBBELLS |
| 107 | GYM MAT (GYMNASIUM MAT) |
| 108 | TRADEMILL - Commercial |
| 109 | TRADEMILL - Semi Commercial |
| 110 | ELLIPTICALS - Commercial |
| 111 | UPRIGHT BIKES - Commercial |
| 112 | RECUMBENT BIKE - Commercial |
| 113 | SPINE BIKE - Commercial |
| 114 | OUTDOOR GYM (ARTIFICIAL WOOD COVER) |
| 115 | Air Walker Providing and fixing Air Walker manufactured by combination of mild steel and alt-season artificial wood to seek eco-friendly greenery effect. Dimensions: (L X W X H)= 1210X390X1264mm. 1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm,100 X 100 mm inner area to accommodate square tube shape which is Completelymolded in one single piece. 2) Main Frame – Consist 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure. 3) Paddle- 042mm OD "B" class Gl pipe. 4) Handle Demountable Type - ? 33mm OD "B" class Gl pipe Attached 5 mm thick MS Plate for Demountable system 5) Footrest- cast iron 124X296X5mm thick and M.S. plate of 2mm thick used as support. 6) Main Pipe Top Closing cap’s- Decent Design Size 120X120 PP/HDPE/MS. material. 7) Main Frame Bottom protective cover -Decent Design PP/HDPE material. 8) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from Stainless Steel Press fit or PP/HDPE. 9) Bracket- 8mm thick laser profile is use to support paddle frame. 10) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Square 8mm thickness is welded on top. Torque steel is used to support center pipe. Height of stool is 3ft. 11) Foundation plate -M.S. 250X250mm Square with 8mm thick. 12) Foundation stool is embedded in C.C. stock below ground level. 13) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing. 14) Hardware Nut & Bolts- High Tensile steel Zink Plated 15) Pin"s - ? 25mm M.S./stainless steel specification 304 duly machined as per size. 16) Circlips- A 24 circlips are used for assembly. 17) Bearing bushes- ? 60mm OD and - 0 50mm OD seamless pipe. 18) Surface Coating-best quality of powder coating 80 to 100 micron. 19) Safety Instructions and Exercise chart- Made from Aluminum/stainless steel stick-on product. |
| 116 | Chest Press Double Providing and fixing "Chest Press Double" manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect. Dimensions: (L X W X H}= 1975X720X1920mm. 1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece. 2) Main center pipe- - 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure. 3) Remaining frame- made up of ?48mmOD 60 OD "B" Class G.i. pipe. 4) Handle - Made up of ? 48mm OD "B" Class G.I. pipe, 5) Connecting Link - made up of ?48mmOD "B" Class G.I. pipe. 6) Seat & back rest - 330 X 300X 2mm thick M.S. seat with corner fillet for safety. 7) Handle is connected with frame by 8 MM laser cutting MS profile 8) Main Pipe Top Closing cap’s- Decent Design Size 120X120 PP/HDPE/MS. Material 9) Main Frame Bottom protective cover - Decent Design PP/HDPE material. 10) Nut & Bolts Closing Caps- Ail Nut & Bolt Closing caps made from PP/HDPE/SS 11) Bearing bush Closing cap’s-PP/SS/HDPE material. 12) Foundation stool: Made from main pipe 91x91x2mm mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft. 13) Foundation plate -M.S. 250X250mm Square with 8mm thick. 14) Foundation stool is embedded in C.C. stock belowground level 15) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing. 16) Pin"s - ? 25mm M.S./ stainless steel specification 304 duly machined as per size 17) Bearing bushes - ? 60mm OD and - ? 50mm OD seamless pipe. 18) Grips • High quality rubber ? 40mm OD. 19) Cirdips-A 24 circlips are used for assembly. 20) Coating - best quality of powder coating 80 to 100 micron. 21) Safety Instructions and Exercise chart - Made From Aluminum/stainless-steel stick-on product |
| 117 | Standing-Seating Twister Providing and fixing "Standing-Seating Twister" manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect. Dimensions: (L X W X H)= 1530X1525X1450mm. 1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece. 2) Main Frame - Consist -. 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure. 3) Seat plate support - ? 60 mm OD "B" Class G.l Pipe. 4) Seating Footrest ring- ? 33 mm OD "B" Class G.l Pipe made by rolling. 5) Seating ring support -? 25 mm OD "B" Class G.l Pipe. 6) Bottom Seat and Standing Support -Made From 100X50X2.5mm Pipe Attached 5 mm thick MS Plate for Demountable system 7) Standing plate- ? 300mm OD X 10mm thick M.S. plate. 8) Seating plate-? 300mm OD X 10mm thick M.S. plate. 9) Handle- ?33mm "6" Class G.l. Pipe made by rolling 10) Main Pipe Top Closing cap"s- Decent Design Size 120X120 PP/HDPE/MS. Material 11) Main Frame Bottom protective cover - Decent Design PP/HDPE material. 12) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS 13) Bearing bush Closing cap"s- PP/SS/HDPE material 14) Foundation stool: Made from main pipe 91x91x2mmpipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft. 15) Foundation plate -M.S. 250X250mm Square with 8mm thick. 16) Foundation stool is embedded in C.C. stock belowground level 17) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing. 18) pin"s - ? 25mm M.S./ stainless steel specification 304 duly machined as per size 19) Bearing bushes - ? 60mm OD and - ? 50mm OD seamless pipe. 20) Cirdips-A 24 circlips are used for assembly. 21)Coating - best quality of powder coating 80 to 100 micron. 22) Safety Instructions and Exercise chart - Made from Aluminum/stainless-steel stick-on product |
| 118 | Horse Rider Providing and fixing "Horse Rider" manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect. Dimensions: (L X W X H)= 1150X420X1425mm. 1) Main Frame Cover • Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece. 2) Main Frame – Consist 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure. 3) Remaining frame- made by ? 48 mm OD "B" class Gl pipe Attached 5 mm thick MS Plate for demountable system 4) Seat frame - Is made by ? 48 mm OD "B" class Gl pipe. Duly Bend Attached 5 mm thick MS Plate for Demountable system 5) Centre Link - made up of ? 48mm OD "B" Class G.l. pipe. 6) Handle - ? 33 mm OD "B” Class Gl pipe. 7) Link - made up of ?48mm OD "B" Class G.l. pipe. Angle between link and ground position is 10-20 degree 8) Paddle vertical support - ? 60 mm OD "8" Class Gl pipe. 9) Foot Rest pipe - ? 33 mm OD "B" Class Gl pipe. 10) Support frame -10 mm thick MS flat is used. Attached 5 mm thick MS Plate for Demountable system 11) Seat – 5mm thick MS laser cutting profile is used. 12) Main Pipe Top Closing cap"s- Decent Design Size 120X120 PP/HDPE/MS. Material 13) Main Frame Bottom protective cover - Decent Design PP/HDPE material. 14) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS 15) Bearing bush Closing cap"s- PP/SS/HDPE material 16) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft, 17) Foundation plate -M.S 250X250mm Square With 8mm thick. 18) Foundation stool is embedded in C.C. stock below ground level 19) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing. 20) Pin"s - ? 25mm M.S./ stainless steel specification 304 duly machined as per size 21) Bearing bushes - ? 60mm OD and - ? 50mm OD seamless pipe. 22) Grips - High quality rubber 0 40mm OD. 23) Circlips-A 24 circlips are used for assembly. 24) Coating - best quality of powder coating 80 to 100 micron. 25) Safety Instructions and Exercise chart - Made from Aluminum/stainless-steel stick on product. |
| 119 | Leg Press Double Providing and fixing "Leg Press Double" manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect. Dimensions: (L X W X H)« 1696X415X1520mm. 1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece. 2) Main Frame Cover-Fully Top to Bottom Covered with all-season Artificial Wood Outer size 120X120 mm 100X100 mm inner gap to accommodate Square Tube Shape fully molded One-piece 3) Main Frame - Consist -. 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure 4) Seat Frame Top support- Made by 0 48mm OD "B" Class Gl pipe, Attached 5 mm thick MS Plate for Demountable system. 5) Foot rest support pipe-Made by ? 48mm OD "B” Class Gl pipe. Attached 5mm thick MS Plate for Demountable system 6) Seat Frame Main Pipe - Made by? 60mm OD "B" Class Gl pipe. Attached 10mm thick MS laser Profile Plate for Demountable system 7) Seat frame - ? 42mm OD "B” Class GI Pipe. Duly Bend 8) Leg Press back rest should be angled in 120-130 degree 9) Foot rest- cast iron 124X296X5mmthick and M.S plate of 2mm thick use to support it. 10) Seat-330X300X2mm thick M.S. seat with corner fillet for safety. 11) Main Pipe Top Closing cap"s- Decent Design Size 120X120 PP/HDPE/MS. Material 12) Main Frame Bottom protective cover - Decent Design PP/HDPE material. 13) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS 14) Bearing bush Closing cap"s- PP/SS/HDPE material 15) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft. 16) Foundation plate-M.S. 250X250mm Square With 8mm thick. 17) Foundation stool is embedded in C.C. stock belowground level 18) Bearing- 6005 use is permanent lubricated reputed brands (SKF/FAG) or self-lubricated imported bushing. 19) Pin"s - ? 25mm M.S./ stainless steel specification 304 duly machined as per size 20) Bearing bushes - ? 60mm OD and - ?50mm OD seamless pipe. 21) Grips - High quality rubber ? 40mm OD. 22) Cirdips-A 24 circlips are used for assembly 23) Coating - best quality of powder coating 80 to 100 micron. 24) Safety instructions and Exercise chart - Made from Aluminum/stainless-steel stick-on product. |
| 120 | Rower Providing and fixing "Rower" manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect. Dimensions: (L X W X H) = 1492X92SX1030mm. 1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece. 2) Top and Bottom Main Frame - Consist 91X91x2.5mm Thickness Square tube get maximum internal strength to structure 3) Foot Rest Support-Made by ?60mm OD "B" Class G.l. pipe. Attached 5 mm thick MS Plate for Demountable system 4) Handle- ?33mm OD "B" Class G.l pipe. Duly Bend. Angle between handle and horizontal surface Is 75-80 degree. 5) All Connecting Link - Made By ?48mm OD "B" Class G.l. pipe. 6) Seat - 330 X 300 X 2mm thick M.S. seat with corner fillet for safety. 7) Main Pipe Top Closing cap"s- Decent Design Size 120X120 PP/HDPE/MS. Material 8) Main Frame Bottom protective cover - Decent Design Size PP/HDPE material. 9) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS 10) Bearing bush Closing cap"s- PP/SS/HDPE material 11) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft. 12) Foundation plate -M.S. 2S0X250mm Square With 8mm thick. 13) Foundation stool is embedded in C.C. stock below ground level 14) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing. 15) Pin"s - ? 25mm M.S./stainless steel specification 304 duly machined as per size 16) Bearing bushes - ? 60mm OD and - ? 50mm OD seamless pipe. 17) Grips - High quality rubber 0 40mm OD. 18) Cirdips-A 24 circlips are used for assembly. 19) Coating • best quality of powder coating 80 to 100 micron. 20) Safety Instructions and Exercise chart - Made from Aluminum/stainless-steel stick-on product. |
| 121 | Seated Puller Double Providing and fixing "Seated Puller Double" manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect. Dimensions: (L X W X H) = 197SX680X1975mm. 1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece. 2) Main Frame - Consist -. 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure 3) Seat Frame Top support* Made by ? 48mm OD "B" Class G! pipe. Attached 5 mm thick MS Plate For Demountable system 4) Seat Main Frame- Made by ? 48mm OD "B" Class Gl pipe. Attached With Handle Profile 5) Handle Profile- Made By M.S. 10 mm Thick Laser cutting Profile 6) Handle • Made by 048 mm OD "B" Class G.l. pipe. 7) Connected Link-Made by by 048 mm OD "B" Class G.l. pipe 8) Seat - 330 X 300 X 2mm thick M.S. seat with corner fillet for safety. 9) Main Pipe Top Closing cap"s- Decent Design Size 120X120 PP/HDPE/MS. Material 10) Main Frame Bottom protective cover - Decent Design PP/HDPE material. 11) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS 12) Bearing bush Closing cap"s-PP/SS/HDPE material 13) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft 14) Foundation plate-M.S 250X250mm Square With 8mm thick. 15) Foundation stool is embedded in C.C. stock below ground level 16) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing. 17) Pin"s - ? 25mm M.S./ stainless steel specification 304 duly machined as per size 18) Bearing bushes - ? 60mm OD and - ? 50mm OD seamless pipe. 19) Grips - High quality rubber ? 40mm OD. 20) Circlips-A 24 circlips are used for assembly. 21) Coating - best quality of powder coating 80 to 100 micron. 22) Safety Instructions andExercise chart - Made from Aluminum/stainless steel stick onproduct |
| 122 | Shoulder Builder Double Providing and fixing "Shoulder Builder Double" manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect. Dimensions: (t X W X H)= 910X578X1520mm. 1)Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece. 2) Main Frame - Consist -. 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure 3) Ring Fitting Top support- Made by 0 48mm OD "B" Class Gi pipe. Attached 5 mm thick MS Plate For Demountable system 4) Shoulder Builder ring - ?33 mm OD “B" Class G.l Pipe. 5) Shoulder ring And Bearing Bush support Pipe-025 mm OD "B" Class G.l Pipe. 6) Nylon knob with Bearing - Is fixed on shoulder ring pipe for rotating purpose, 2 set to be fixed in a position for kids and adults. 7) Main Pipe Top Closing cap"s- Decent Design Size 120X120 PP/HDPE/M5. Material 8) Main Frame Bottom protective cover - Decent Design PP/HDPE material. 9) Nut & Bolts Closing Caps- All Nut 8i Bolt Closing caps made from PP/HDPE/SS 10) Bearing bush Closing cap"s- PP/SS/HDPE material 11) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft. 12) Foundation plate -M. S 250X250mm Square With 8mm thick. 13) Foundation stool is embedded in C.C. stock below ground level 14) Bearing- 6005 use is permanent lubricated reputed brands (SKF/FAG) or self-lubricated imported bushing. 15) Pin"s-? 25mm M.S./stainless steel specification 304 duly machined as per size 16) Bearing bushes - ? 60mm OD and - ? 50mm OD seamless pipe. 17) Grips - High quality rubber ? 40mm OD. 18) Circlips-A 24 circlips are used for assembly. 19) Coating - best quality of powder coating 80-100 micron. 20) Safety Instructions and Exercise chart - Made from Aluminum/stainless-steel stick on product |
| 123 | Sit Up Board Providing and fixing "Sit Up Board" manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect. Dimensions: (L X W X H)= 1590X480X680mm. 1) Main Frame Cover - Completely covered top to bottom with all season artificial wood, outer size 120x120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece. 2) Main Frame - Consist 91X91x2.5mm Thickness Square Tube get maximum internal strength to the structure. 3) Back rest frame made from ?33 OD "B" Class G.l. pipe in bending design and finally covered with 5mm thick mild steel checkered plate. Back rest frame should have adjustment mechanism for 3 different positions. 4) Top and Bottom Leg Support-? 60mm OD "B" Class G.i Pipe, 5) Main Frame Bottom Support-? 60mm OD "B" Class G.i Pipe 6) Remaining Frame - ? 60 mm OD "B" Class G.l pipe. 7) Backrest Seat- made by All-season Artificial Wood Eco Friendly look 8) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft. 9) Foundation plate -M. S 250X250mm Square With 8mm thick. 10) Foundation stool is embedded in C.C. stock below ground level 11) Coating - best quality of powder coating 80-100 micron. 12) Safety Instructions and Exercise chart - Made from Aluminum/stainless-steel stick-on product |
| 124 | SkyWalker Providing and fixing "Sky Walker" manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect. Dimensions(L X W X H)= 1740X920X1730mm. 1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece. 2) Main Frame Cover-Fully Top To Bottom covered With All-season Artificial Wood Outer size 120X120 mm 100X100 mm inner gap to accommodate Square Tube Shape fully molded One- piece. 3)Main Frame – Consist 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure. 4) Paddle vertical support - ?48mm OD "B" Class Gl pipe. 5) Handle- ?33mm OD "B" Class GI pipe dually bending design. 6) Leg movement frame- 50mm X50mm X2mm thick square pipe. 7) Footrest - cast Iron 124X296X5mm thick and M.S. plate of 2mm thick use for to support it. 8) Main Pipe Top Closing cap"s- Decent Design Size 120X120 PP/HDPE/MS. Material 9) Main Frame Bottom protective cover - Decent Design PP/HDPE material. 10) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS 11) Bearing bush Closing cap"s- PP/SS/HDPE material. 12) Foundation stool: Made from main pipe 91x91x2mmpipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft. 13) Foundation plate -M.S 2S0X250mm Square With 8mm thick. 14) Foundation stool is embedded in C.C. stock below ground level 15) Bearing- 6005 use Is permanent lubricated reputed brands or self-lubricated imported bushing. 16) Pin"s - ? 25mm M.S./ stainless steel specification 304 duly machined as per size 17) Bearing bushes - ? 60mm OD and? 50mm OD seamless pipe. 18) Grips - High quality rubber ? 40mm OD. 19) Circlips-A 24 circlips are used for assembly. 20) Coating - best quality of powder coating 80-100 micron. 21) Safety Instructions and Exercise chart - Made From Aluminum/stainless steel stick |
| 125 | Surf Board Providing and fixing "Surf Board" manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect. Dimensions: (L X W X H)= 1110X900X1410mm. 1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece. 2) Main Frame - Consist -. 91X91x2.Smm Thickness Square Tube get maximum internal strength to structure. 3) Main Frame Connecting pipe - 91X91x2.5mm Thickness G.l Square Tube 4) Handle- ? 42mm and ? 33 OD “B" Class Gl pipe.. Attached S mm thick MS Plate For Demountable system 5) Leg movement frame- ? 48mm OD "B” Class Gl pipe.. Attached 5 mm thick MS Plate For Demountable system 6) Footrest - cast iron 325X270X8mm thick and M.S. plate of 250x200x2mm thick use for to support it. 7) Bracket- 8mm thick laser profile is use to support leg movement frame. 8) Main Pipe Top Closing cap"s- Decent Design Size 120X120 PP/HDPE/MS. Material 9) Main Frame Bottom protective cover - Decent Design PP/HDPE material. 10) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS 11) Bearing bush Closing cap"s-PP/SS/HDPE material 12) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X25Qmm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft. 13) Foundation plate -M.S 250X250mm Square with 8mm thick. 14) Foundation stool is embedded in C.C. stock below ground level 15) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing. 16) Pin"s - ? 25mm M.S./ stainless steel specification 304 duly machined as per size 17) Bearing bushes - ? 60mm OD and - ? 50mm OD seamless pipe. 18) Grips - High quality rubber ? 40mm OD. 19) Cirdips-A 24 circlips are used for assembly. 20) Coating - best quality of powder coating 80-100 micron. 21) Safety Instructions and Exercise chart - Made from Aluminum/stainless steel stick on product. |
| 126 | Exer Cycle Providing and fixing "Exer Cycle" manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect. Dimensions: (L X W X H)= 1370X720X1210mm. 1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100 X 100 mm inner area to accommodate square tube shape which is completely molded in one single piece. 2) Main Frame - Consist -. 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure. 3) Handle- ?33mm OD "B" Class 61 Round pipe dully bending design. Attached 5 mm thick MS Plate For Demountable system 4) Seat- 5mm thick MS laser cutting profile is used. 5) Paddle-100mmX50mm capsule pipe and 40x16 mm MS flat is use for connecting the paddle and shaft. 6) Main Pipe Top Closing cap"s- Decent Design Size 120X120 PP/HDPE/MS. Material 7) Main Frame Bottom protective cover - Decent Design PP/HDPE material. 8) Nut & Bolts Closing Caps- Ail Nut & Bolt Closing caps made from PP/HDPE/SS 9) Bearing bush Closing cap"s- PP/SS/HDPE material 10) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft. 11) Foundation plate -M.S 250X250mm Square With 8mm thick. 12) Foundation stool is embedded in C.C. stock below ground level 13) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing. 14) Pin’s - ? 25mm M.S./ stainless steel specification 304 duly machined as per size 15) Bearing bushes - ? 60mm OD and? 50mm OD seamless pipe. 16) Grips-High quality rubber 040mm OD. 17) Circlips-A 24 circlips are used for assembly. 18) Coating - best quality of powder coating 80-100 micron. 19) Safety Instructions and Exercise chart - Made from Aluminum/stainless steel stick on product |
| 127 | Multi-Functional Trainer Providing and fixing "Multi-Functional Trainer" manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect. Dimensions: (LX W X H)= 1840X490X1290mm. 1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100X100mm inner area to accommodate square tube shape which is completely molded in one single piece. 2) Main Frame - Consist -. 91X91x2.5mm Thickness Square Tube gets maximum internal strength to structure. 3) Back support- Made by All-season Artificial Wood Eco Friendly Green look 4) Leg riser support pipe- 80X40X2.Smm thick rectangle pipe. Attached 5 mm thick MS Plate For Demountable system 5) Handle- Leg Raiser Hand Holding Pipe And Dipping Handle Made by 0 33mm OD "B" Class G.l. Pipe. Duly Bend 6) Chin-up support - ? 60mm OD "B" Class G.l. Pipe. Attached 5 mm thick MS Plate For Demountable system 7) Chin-up handle -? 2Smm OD MS bar with knurling. 8) Main Pipe Top Closing cap’s- Decent Design Size 120X120 PP/HDPE/MS. Material 9) Main Frame Bottom protective cover - Decent Design PP/HDPE material. 10) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS 11) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S Plate of 250X250mm Squire 8mm thickness is welded top Square tube of 30x30x2 mm is use for to support center pipe.Height of stool is 3ft. 12) Foundation plate -M.S 250X250mm Square With 8mm thick. 13) Foundation stool Is embedded in C.C. stock below ground level 14)Grips - High quality rubber ?40mm OD. 15) Coating - best quality of powder coating 80-100 micron. 16) Safety instructions and Exercise chart - Made From Aluminum/stainless steel stick on product |
| 128 | Bench with Fixed Weight Providing and fixing "Bench with Fixed Weight" manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect. Dimensions (L X W X H)= 1420X670X2620mm. 1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100X100mm inner area to accommodate square tube shape which is completely molded in one single piece. 2) Main Frame - Consist 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure. 3) Backrest frame-Made from ?42OD"B" Class mm G.l. pipe. 4) Bottom support pipe - 50X25X2.5mm thick rectangle pipe. 5) Fixed weight- made from SS 202 Stainless Steel tube and 5kg casting round plate is attached at both end of bar. 6) Backrest Seat-made By made by all-season Artificial Wood Eco Friendly Green look 7) Main Pipe Top Closing cap"s- Decent Design Size 120X120 PP/HDPE/MS. Material 8) Main Frame Bottom protective cover - Decent Design PP/HDPE material. 9) Nut & Bolts Closing Caps* All Nut & Bolt Closing caps made from PP/HDPE/SS 10) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft. 11) Foundation plate -M.S 250X250mm Square with 8mm thick. 12) Foundation stool is embedded in C.C. stock below ground level 13) Coating - best quality of powder coating 80-100 micron. 14) Safety Instructions and Exercise chart - Made From Aluminum/stainless steel stick on product |
| 129 | Shoulder Exercise Spinner Providing and fixing "Shoulder Exercise Spinner* manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect. Dimensions (L X W X H)= 1230X1210X1310mm. 1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100X100mm inner area to accommodate square tube shape which is completely molded in one single piece. 2) Main Frame - Consist -. 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure 3) Ring Fitting Top support- Made by ? 48mm OD "B" Class Gl pipe. Duly Bend attached 5 mm thick MS Plate For Demountable system. 4) Spinner ring - ?33 mm OD "B" Class G.l Pipe. 5) Spinner ring And Bearing Bush support Pipe - ?25 mm OD "B" Class G.l Pipe. 6) Shoulder Ring size - Front Part DIA 450mm and Rear Part size is DIA 600mm. 7) Nylon knob with Bearing - is fixed on shoulder ring pipe for rotating purpose. 8) Main Pipe Top Closing cap"s- Decent Design Size 120X120 PP/HDPE/MS. Material. 9) Main Frame Bottom protective cover - Decent Design PP/HDPE material. 10) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS. 11) Bearing bush Closing cap"s- PP/SS/HDPE material 12) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft. 13) Foundation plate-M.S 250X2S0mm Square With 8mm thick. 14) Foundation stool is embedded in C.C. stock below ground level 15) Bearing- 6005 use is permanent lubricated reputed brands or self-lubricated imported bushing. 16) Pin"s - ? 25mm M.S./ stainless steel specification 304 duly machined as per size 17) Bearing bushes - ? 60mm OD and - ?50mm OD seamless pipe. 18) Circlips-A 24 circlips are used for assembly. 19) Coating - best quality of powder coating 80-100 micron. 20) Safety Instructions and Exercise chart - Made From Aluminum/stainless steel stick on product. |
| 130 | Double Bar Providing and fixing "Double Bar" manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect. Dimensions: (L X W X H) 1870X540X2010mm. 1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100X100mm inner area to accommodate square tube shape which is completely molded in one single piece. 2) Main Frame - Consist 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure. 3) Double Bar Hand Rail Pipe- ?42mm OD "B" Class Gl pipe.. Attached 5 mm thick MS Plate For Demountable system 4) Main Pipe Top Closing cap"s- Decent Design Size 120X120 PP/HDPE/MS. Material 5) Main Frame Bottom protective cover - Decent Design PP/HDPE material. 6) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS 7) Foundation stool: Made from main pipe 91x91x2mmpipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is .3ft. 8) Foundation plate -M.S 250X250mm Square With 8mm thick. 9) Foundation stool is embedded in C.C. stock below ground level 10) Coating - best quality of powder coating 80-100 micron. 11) Safety Instructions and Exercise chart - Made From Aluminum/stainless steel stick on product |
| 131 | Horizontal Bar Providing and fixing "Horizontal Bar* manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect. Dimensions: (L X W X H) 3580X2610mm. 1) Main Frame Cover • Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100X100mm inner area to accommodate square tube shape which Is completely molded in one single piece. 2) Main Frame – Consist 91X91x2.Smm Thickness Square Tube get maximum internal strength to structure. 3) Horizontal Barb Hand Rail Pipe- 0 42mm 00 "B” Class Gl pipe.. Attached 5 mm thick MS Plate for Demountable system 4) Footrest - Made By 0 42mm OD "B" Class Gl pipe.. Attached 5 mm thick MS Plate for Demountable system M.S. plate of 150x100x2mm thick use for to support it. 5) Main Pipe Top Closing cap"s- Decent Design Size 120X120 PP/HDPE/MS. Material 6) Main Frame Bottom protective cover - Decent Design PP/HDPE material. 7) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS 8) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft. 9) Foundation plate made up of M.S 250X2S0mm square With 8mm thick. 10) Total 03 foundation stools are used which are connected to each other in single piece. 11) Foundation stool is embedded in C.C. stock below ground level 12) Coating - best quality of powder coating 80-100 micron. 13) Safety Instructions and Exercise chart - Made From Aluminum/stainless steel stick on product. |
| 132 | Push UP Bar Providing and fixing "Push Up Bar" manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect. Dimensions: (L X W X H)= 1250X540X1530mm. 1) Main Frame Cover - Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100X100mm inner area to accommodate square tube shape which is completely molded in one single piece. 2) Main Frame - Consist 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure. 3) Main Frame Connecting pipe - 91X91x2.5mm Thickness G.l Square Tube 4) Push up Bar Hand Rail- ? 33 OD "B" Class Gl pipe. Duly Bend. Attached 5 mm thick MS Plate For Demountable system 5) Main Pipe Top Closing cap"s- Decent Design Size 120X120 PP/HDPE/MS. Material 6) Main Frame Bottom protective cover-Decent Design PP/HDPE material. 7) Nut & Bolts Closing Caps- All Nut 8t Bolt Closing caps made from PP/HDPE/SS 8) Foundation stool: Made from main pipe 91x91x2mm pipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft. 9) Foundation plate -M.S 250X2S0mm Square With 8mm thick. 10) Foundation stool is embedded in C.C. stock below ground level 11) Coating - best quality of powder coating 80-100 micron. 12) Safety Instructions and Exercise chart - Made From Aluminum/stainless steel stick on product |
| 133 | Leg Stretching Providing and fixing "Leg Stretching" manufactured by combination of mild steel and all-season artificial wood to seek eco-friendly greenery effect. Dimensions: (L X W X H)= 1696X415X1520mm. 1) Main Frame Cover • Completely covered top to bottom with all-season artificial wood, outer size 120X120mm, 100X100mm inner area to accommodate square tube shape which is completely molded in one single piece. 2) Main Frame - Consist 91X91x2.5mm Thickness Square Tube get maximum internal strength to structure. 3) Leg Stretching Frame- Made By ? 33 OD "B" Class Gl pipe Duly Bend. Attached 5 mm thick MS Plate for Demountable system 4) Main Pipe Top Closing cap"s- Decent Design Size 120X120 PP/HDPE/MS. Material 5) Main Frame Bottom protective cover-Decent Design PP/HDPE material. 6) Nut & Bolts Closing Caps- All Nut & Bolt Closing caps made from PP/HDPE/SS 7) Foundation stool: Made from main pipe 91x91x2mmpipe and top support of M.S. plate of 250X250mm Squire 8mm thickness is welded top. Torque steel is used to support center pipe. Height of stool is 3ft. 8) Foundation plate -M.S 250X250mm Square with 8mm thick. 9) Foundation stool is embedded in C.C. stock below ground level 10) Coating - best quality of powder coating 80-100 micron. 11) Safety instructions and Exercise chart - Made from Aluminum/stainless-steel stick-on product |
| 134 | OUTDOOR GYM (GALVANISED IRON) |
| 135 | Air Walker |
| 136 | Chest Press Double |
| 137 | Triple Twister |
| 138 | Horse Rider |
| 139 | Leg Press Double |
| 140 | Rower |
| 141 | Seated Puller Double |
| 142 | Shoulder Builder Double |
| 143 | Sit Up Board |
| 144 | Sky Walker |
| 145 | Surf Board |
| 146 | Exer Cycle |
| 147 | Standing and Seating Twister |
| 148 | Multi -Functional Trainer |
| 149 | Bench with Fixed Weight |
| 150 | Bench with Fixed Dumbbells |
| 151 | Back Extension |
| 152 | Chest Press Single |
| 153 | Instruction Board |
| 154 | Double Twister Standing |
| 155 | Push Up Bar |
| 156 | Tai chi Spinner |
| 157 | Three in One Combo Unit Chest press/Air walker/Seated Puller. |
| 158 | Four in One Combo Unit Seating Twister/ Standing Twister /Leg Press /Air walker. |
| 159 | Cross Trainer Single. |
| 160 | Cross Trainer Double |
| 161 | Arm and Paddle Bike. |
| 162 | Single bar. |
| 163 | Double bar. |
| 164 | STAINLESS STEEL OPEN GYM |
| 165 | M.S PLATFORM |
| 166 | LADDER TYPE CLIMBER (MONKEY BAR EXERCISE) |
| 167 | TRINGLE PULL UP BAR |
| 168 | LEG EXTENSION/ INCLINE SIT UPS |
| 169 | TRICEPS EXERCISE. |
| 170 | PULL UP BAR |
| 171 | DIPING BAR |
| 172 | PUSH UP BAR. |
| 173 | HANGING DIPS BAR |
| 174 | DISPLAY BOARD |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
