Bids Are Invited For Comprehensive Maintenanceand Servicing - 1 (A) Fuel Filter Make : Bosch Set 1.00(B) Oil Filter Make : Bosch Each 1.00(C) Air Filterremove And Refit After Cleaning (D) Engine Oil (20W 50) Make :Castrol Ltrs 7.00(E) Brake Fluid 20 Dot 4, GOA-Goa

Bids Are Invited For Comprehensive Maintenanceand Servicing - 1 (A) Fuel Filter Make : Bosch Set 1.00(B) Oil Filter Make : Bosch Each 1.00(C) Air Filterremove And Refit After Cleaning (D) Engine Oil (20W 50) Make :Castrol Ltrs 7.00(E) Brake Fluid 20 Dot 4 Make: Tvs Ltrs 1.00(F) Coolant Make : Castrolltrs 2.00(G) Distilled Waterltrs 5.00(H) Steering Oil (Atf Dexron Iii) Make : Castrol Ltrs 0.52 Dismantling And Taking Down Defective Clutch System Replacement Of Minor Spare And Assembling, Testing For Vehicle Complete All As Specified As Directed.(A) Replace The Oil Seal Kit Of Top Clutch Cylinder(B) Clutch Cylinder Each (C) Repair The Unserviceable Alternator By Changing Oil Seal, Bush, Bentex, Bearing Etc.(D) Clutch Release Bearingeach (E) Timing Belt Each No. (F) Clutch Pedal Traveleach (G) Clutch Fork Each (H) Damper Springset 1.00(I) Adjust And Servicing Of Accelerator And Clutch Cable Both3 Overhauling All Four Door And Hinges For Smooth Function. Open And Remove Front Rhs Door To Replace New Channel, Rubber Strip Nut Bolt, Handle Etc. Do Glass Aliment Also One Job.4 (A) Suspension Work:Replace Unserviceable Both Front Shock Absorber And Bushes.One Job.(B) Replace Unserviceable Suspension Bushesof Front Side With New Tower Bolt.(C) Replace New Ball Joint Set Both Side Lhs And Rhs Of Front Suspension , Petty Work - 5 (A) Dismantle Bonnet Of The Vehicle For Repair And Rectify The Denting Refiting After Repair And Rectify The Dent And Band In Proper Position. Overhauling Clutch Cable For Smooth Function Andreplace Bonnet Bushes Also(B) Open And Dismantle Desk Board Of Vehicle And Remove All Connected Wire And Connection To Replace Unserviceable Pol Meter Unit. 6 (A) Dismantling & Cutting The Corroded Sheet In Back Open Compartment And Replacing With New Ms Sheet Ofduly Welded Along The Sides Complete And Re Assembling The Door On The Original Position After Caring Out Complete (Wilding, Drilling, Nut, Bolt) Works To The Back With New Thick Ms Angle Frame One Job.B) Scraping Out Old Painted Surface Of Vehicles .Painting For One Coat Of Enameled Paint Over Two Coats Of Red Oxide Primer Of Welding Work, Scratches, Damages , Welding/Fabrication Work And Concerned Complete Of Vehicleall As Specified And As Directed One Job.7Servicing And Washing Of Full Vehicle Including Greasing. Total Quantity : 1

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	07-01-2022			08-01-2022
2	20-12-2021			22-12-2021
3	22-01-2022			25-01-2022

Refer document

Refer document

Refer document