|
| 1 | Earthwork in excavation in hard soil for site leveling, foundation, pits, trenchesand other civil works upto and including 1.5metre lift and stacking the soil upto a lead of 100 metre and including dewatering, removing slush, shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge. Hard soils. |
| 2 | Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge. |
| 3 | Supplying and filling sand in foundation and over areas including watering, ramming, consolidating and dressing, labours, tools, taxes etc. all complete as per the specification and direction of Engineer-In-Charge. |
| 4 | Providing and laying plain cement concrete 1:4:8 (1 cement : 4 sand : 8 stoneagregate 40mm nominal size) as levelling course in floor and plinth including tempering, curring, shuttering etc. complete all depth and height. |
| 5 | First class Fly ash Brick masonry usingbricks of size 23 cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. |
| 6 | First class Fly ash Brick masonry usingbricks of size 23 cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super Structure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. |
| 7 | Ground floor |
| 8 | First floor |
| 9 | Terrace floor |
| 10 | First class Fly ash Brick masonry usingbricks of size 23 cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:4) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 4 (Six) hours in water before use in Super Structure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. |
| 11 | Ground floor |
| 12 | First floor |
| 13 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-20 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed andcleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portlandslag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. |
| 14 | Ground floor |
| 15 | a) Footing |
| 16 | b) Pedestal :- |
| 17 | d) Column up to plinth |
| 18 | e) Plinth Beam |
| 19 | f) Column above plinth |
| 20 | g) Lintel |
| 21 | h) Chajja |
| 22 | i) Roof Beam |
| 23 | j) Slab |
| 24 | k) Stair case |
| 25 | First floor |
| 26 | f)Column |
| 27 | g) Lintel |
| 28 | h) Chajja |
| 29 | i)Roof Beam |
| 30 | j) Slab |
| 31 | k) Stair case |
| 32 | Terrace floor |
| 33 | f)Column |
| 34 | g) Lintel |
| 35 | h) Chajja |
| 36 | i)Roof Beam |
| 37 | j) Slab |
| 38 | Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) make includingbending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge. |
| 39 | Ground floor |
| 40 | First floor |
| 41 | Terrace floor |
| 42 | 12mm cement plaster to outside of brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. |
| 43 | Ground floor |
| 44 | First floor |
| 45 | Terrace floor |
| 46 | 16mm cement plaster to inside of brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. |
| 47 | Ground floor |
| 48 | First floor |
| 49 | Terrace floor |
| 50 | 6 mm cement plaster on RCC surfaces at ceiling/slab soffit and other locations with cement mortar of mix 1:4 (1 cement : 4 coarse sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. |
| 51 | Ground floor |
| 52 | First floor |
| 53 | Terrace floor |
| 54 | Supplying, fitting & fixing of Granite Tiles of minimum Above 0.40 sqm. (20mm thick) of approved make in floors laid on 20 mm thick cement mortar (1:4)(1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-charge |
| 55 | Ground floor |
| 56 | First floor |
| 57 | Supplying, fitting & fixing of10 mm thick& sizeof 600x600 mmGlazed Vitrified floor tiles (GVT) of matt finish(WOODEN FINISH/RUSTIC FINISH) with veilcraft (VC )shield( Scratch free/stain free) withwater absorption limitbetween 0.08% to 3% and conforming to IS : 15622:2006 (Group B Ib). laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge (for New Work only ) |
| 58 | Ground floor |
| 59 | First floor |
| 60 | Supplying, fitting & fixing of 10 mm thick& sizeof 600x600 mmGlazed Vitrified floor tiles (GVT) of matt finish(WOODEN FINISH/RUSTIC FINISH) with veilcraft (VC )shield( Scratch free/stain free) withwater absorption limitbetween 0.08% to 3% and conforming to IS : 15622:2006 (Group B Ib) laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge |
| 61 | Ground floor |
| 62 | First floor |
| 63 | Supplying, fitting & fixing of10 mm thick& sizeof 300x300 mmCeramicfloor tilesof matt finish laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge (for New Work only ) |
| 64 | Ground floor |
| 65 | First floor |
| 66 | Supplying, fitting & fixing of Germ freeCeramic wall tiles of premium grade of size 600x300mm having thickness 6.5mm to 6.7mm confirming to IS 13753in dadoes, skirting and risers of stepslaid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge |
| 67 | Ground floor |
| 68 | First floor |
| 69 | Providing and fixing seasoned sal wood work in frames at any locations including doors, windows,cupboard, clerestory and other framesfixing in position including cost of hinges, M.S. flat (30mm x 6mm) hold fasts lugs ordash fasteners of required dia and length as per drawing / specification, at all floors and all heights. |
| 70 | Ground floor |
| 71 | First floor |
| 72 | Factory made 30mm/32mm flush door shutter (Laminates both side of frame) with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect |
| 73 | Ground floor |
| 74 | First floor |
| 75 | Supplying Fitting, fixing up fully glazed aluminium framed window(sliding type) made up aluminiumsection 9778 as window frame, section 4095, 4096 and 9777, 3994 as shutter frame with 5mm black glass as panel fitted withrubber beading including locking arrangement including all fitting including cost of all materials, all taxes, labour, T&P excluding cost of glass etc. complete as per direction of the Engineer-in-charge |
| 76 | Ground floor |
| 77 | First floor |
| 78 | Terrace floor |
| 79 | Supplying and Fixing of M.S. Grills, M.S.Doors, M.S. Gate etc including cost,conveyance of all materials,priming,and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge |
| 80 | Ground floor |
| 81 | First floor |
| 82 | Terrace floor |
| 83 | Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge. |
| 84 | Ground floor |
| 85 | First floor |
| 86 | Terrace floor |
| 87 | Painting two coats with approved anti-fungal weather seal paints (ISI) of approved colour, shade on wall surface over a coat of wall primer(ISI) water bound including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour,labour cess with T&P etc, complete as per specification & direction of Engineer-in-charge. |
| 88 | Ground floor |
| 89 | First floor |
| 90 | Terrace floor |
| 91 | Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. |
| 92 | Ground floor |
| 93 | First floor |
| 94 | Terrace floor |
| 95 | Painting two coats with approved plastic emulsion paintover a coat of wall primer of make Dulux / Berger / Asian to inside surface of walls finishedwith Acrylic Wall putty (water based) ofmake (Birla / JK) and finished smooth & even surface to receive painting using roller to the final coat including cost of scaffolding staging charges with cost, conveyances, taxes of all materials, cost of labour, T&P required for the work etc. complete for all floors as per specification & direction of the Engineer-in-charge. Note :- Sample of Paint & Primer shall be approved before procurement and use. |
| 96 | Ground floor |
| 97 | First floor |
| 98 | Terrace floor |
| 99 | Painting two coats with approved Enamel Paint on wood work over a coat of Wood Primer in Ground Floor |
| 100 | Ground floor |
| 101 | First floor |
| 102 | Painting two coats with approved Enamel Paint on Steel work in Ground Floor |
| 103 | Ground floor |
| 104 | First floor |
| 105 | Terrace floor |
| 106 | Providing all materials, labour, T&P for laying/fixing of following dia CPVCpipesSDR-11as perIS-15778/2007 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floor or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of transportation scaffolding etc. excluding GST as per specification and direction of Engineer-in-charge. Make:ASTRAL / ASHRIVAD / AJAY / SUPREME |
| 107 | 20mm dia |
| 108 | 25mm dia |
| 109 | 32mm dia |
| 110 | 40mm dia |
| 111 | 50mm dia |
| 112 | Providing all materials, labour, T&P for laying/ fixing of following dia CPVCpipesSch-80 as per ASTM-F-441 including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of transportation, scaffolding etc. as per specification excluding GST and direction of Engineer-in-charge.Make:ASTRAL / ASHRIVAD / AJAYA / SUPREME.75mm dia |
| 113 | Providing all materials, labour, T&P for laying/ fixing of following dia uPVC solvent welded pipesSch-80 as per ASTM-D-1785 including fixing of required size uPVC Schedule-80fittings as per ASTM D-2467like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive oftransportation, scaffolding etc. as per specification excluding GST and direction of Engineer-in-charge.Make:ASTRAL / ASHRIVAD / AJAYA / SUPREME. 40mm dia |
| 114 | Providing all materials, labour, T&P for fitting & fixing of following CPVC Ball Valves(CTS Sockets) confirming to IS-15778 with ISI mark as per ASTM D-2846 in all floor & fixing with the pipes after cutting the pipes to required shape & size including wastage etc. of following nominal diameter, all complete including testing the joints with required water pressure.The cost inclusive of transportation scaffolding etc. all complete as per specification excluding GST and direction of Engineer-in-charge. Make:ASTRAL/ASHIRVAD/AJAY / SUPREME 25mm dia CPVC ball valve |
| 115 | 32mm dia CPVC ball valve |
| 116 | Providing all materials labour, T&P for making grooves in bricks/stonemasonary walls vertically or horizontally up to required depth and width in all floor for laying of pipes and fittings up to 50mm dia, testing the joints with required water pressure and making good the damages with cement concrete 1:2:4 with 12mm size h.g.c.b.chips and finished smooth with cement morter (1:4) to original shape including cost of all materials, curing, conveyance of all materials etc. all complete excluding GST as per specification &direction ofEngineer-in-charge. |
| 117 | Providing all labour,T&P for cutting holes in bricks or stone masonry wall for takingpipes in all floors and making good the damages with cement concrete 1:2:4 finished smooth with CP 1:4to original shape including cost of all materials, curing, conveyance, duties etc. all complete as per specification excluding GST & direction ofEngineer-in-charge. For 15mm to 50mm dia pipe to pass in 125mm to 250mm thick wall |
| 118 | For 75mm to 150mm diapipe to pass in250mm thick wall |
| 119 | Providing all labour,T&P and cutting holes in RCC chajja/roof/floor for taking pipes through and making good the damages with supply of all required materials etc. complete excluding GST as per the direction of the Engineer-in-charge. |
| 120 | Providingall materials, labour, T&P for fitting and fixing white glazed vitreous china water closet (European pattern) \"P\" or \"S\" type of approved make as per IS-2556 with ISI mark in all floor including supply of sutaible PVC wall plug and Brass screws etc. all complete including cost of PVC seat cover (solid) withhinges & rubber buffers including testing etc. all complete with all cost, and conveyance as per specification all complete excluding GST as per direction of Engineer-in-charge. Make :( Hindware 20011 ) European Water closet With Cistern . |
| 121 | Supply all materials and labour for fitting and fixing offollowing size white glazedvitreous chinawash hand basin with half pedestal of approved make in all floor of approved quality including cutting the walls & floor and making good the damages with cement concrete etc. includingtransportation etc. all complete excluding GST as per direction of EIC.Make: Hindware (10100) Wash Hand Basin with Standard Pedestalof size (550x400 mm) . |
| 122 | Supply all materials and labour for fitting and fixing offollowing size stainless steel kitchen sink of approved make in all floor of approved quality including cutting the walls & floor and making good the damages with cement concrete etc. includingtransportation etc. all complete excluding GST as per direction of EIC.Make: parryware C855371 KITCHEN SINK ( 450x400x225)mm. |
| 123 | Providing all materials, labour, T&P for fixing of following sizes of bevelled edge mirror of 5mm thick mounted on 6mm thick AC back sheet & CP cup screw with PVC wall plugs in all floor including cost, conveyance, all materials complete as per specification excluding GST and direction of E.I.C.Make-(Parryware C862899) 600mm x 450mm size. |
| 124 | Providing all materials, labour,T&P ,fittings and fixing of different water supply(CP onBrass) fitting (Quarter Turn or as specified) as per IS specification & approved make in all floor of following sizes and specification with leak proof threaded joints with thread seal tape or any other method as required and directed includingtransportation etc., testing and rectification of defects after testing complete excluding GST as per direction of Engineer-in-charge. Make:JAQUAR / PARRYWARE / HINDWARE. |
| 125 | 15mm dia Two-Way Bibcock with wall flange. |
| 126 | 15mm dia Angle Stop cock with wall flange . |
| 127 | C.P. Soap Dish Holder. |
| 128 | Health Faucet ABS SS braided hose 1.00m with CP hook. |
| 129 | 32mm dia C.P.waste (Half Threaded) |
| 130 | 32mm dia C.P. Dome Waste (Full Threaded) |
| 131 | 15mmx50mm C.P. Extension piece |
| 132 | CP Grating. |
| 133 | CP Toilet Paper Holder. |
| 134 | Towel Ring. |
| 135 | Double Coat Hook. |
| 136 | 600 mm long Gass shelf with Glass. |
| 137 | 600 mm long Towel Rail. |
| 138 | sink cock |
| 139 | Long Body Bib-Cock. |
| 140 | Supplying all materials, labour, T&P, fitting and fixing uPVC SWRpipes (Type-B)(Co-moulded Ring type) of approved make confirming to IS-13592/1992with ISI marked, both below & above ground level or fixing on wall surface in all floors including transportation & scaffolding etc. all complete as perspecification excluding GST & direction of the Engineer-in-charge. Make: ASTRAL/ASHIRVAD/AJAY/ SUPREME. 110mm dia pipe |
| 141 | Supplying all materials, labour, T&P, fitting and fixing of following dia uPVC SWR (Co-moulded Ring type) fittings of approvedmake confirming to IS-14735 with ISI marked in all floor with transportation & requisite testing as per specification excluding GST & direction of EIC.Make: ASTRAL/ASHIRVAD/AJAY/ SUPREME. |
| 142 | 110mm x110mm P-Trap |
| 143 | 110mmx87.5º Plane bend |
| 144 | 110mmx87.5º door bend |
| 145 | 110mmx45º Plane Bend |
| 146 | 110mm dia Single Tee |
| 147 | 110mm Single Tee with Door |
| 148 | 110mm dia single \"Y\" with door |
| 149 | 110mm WC connector/Bend with lip ring |
| 150 | 110mm dia Vent cowl |
| 151 | PVC Clamp Suitable for 110mmdia pipe |
| 152 | 110mm Socket plug |
| 153 | 110mm single Y without door |
| 154 | 110mm Double Y with door |
| 155 | 110mmPushfit Coupler |
| 156 | Providing, Fitting,fixing including ,testing & Commissioning of following capacity polyethylene moulded water storage cylindrical tank including cutting holes of required size & shape & Providing, fitting and fixing of CPVC Water tank connector/Adaptor with jam nut etc. for filling, delivery, overflow & wash out arrangements,including hoisting upto required height above the ground level & placing the tank of required position including construction of RCC pedestal upto 600mm ht. from the terrace with RCC (M-25) base slab,beam of approved design & 125mm thick brick masonary wall upto 2/3 ht. of tank (all round) in CM 1:4,12mm CP 1:4 over Brick work etc all complete as per Specification excluding GST & direction of EIC. (Make:Sintex) 2000 Litres Capacity for drinking Polyethylene moulded water storage tank with lid & locking arrangement as per IS-12701/1996 with ISI mark. |
| 157 | Providing all material, labour, T&P and construction of Gully Trap chamber of size as mentioned below with 250mm nominal size flyash Brick having crushing strength not less than 75kg/sqcm in CM 1:6 over a bed of 100mm thick C.C. (1:1.5:3) using 40mm size HG metal, plastering with 12mm thick cement plaster with cement punning in cement mortar 1:6 on inner surface and 12mm thick cement plaster in cement mortar (1:4) on external surface,fitting & fixing of 110mm square PVC Gully Trap with grating and pre-cast factory made (SFRC) cover with frame of opening size 260mmx260mm, moulding and shaping the channel & benching with C.C (1:2:4) with hard granite chips 12mm size,earth workexcavation in all kinds of soil & rock and filling the cavityof the chamber with excavated & selected earthlevelling the surface around the chamber with disposal of surplus earth within 50mt lead as per specification, design & drawing including cost of curing androyality, cost, conveyance etc. all complete as per specification excluding GST& direction of EIC. 300mm x 300mm x upto 450mm deep gully trap. |
| 158 | Providing all materials, labour T&P for construction of inspection chamber with Fly Ash bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75Kg/Sqcm in C.M (1:4), PCC 1:4:8 with 40mm size hard granite crusher broken metal of 150mm thick, 12mm thick cement plaster 1:6 both in outer & inner surface of the wall & bottom, earth work excavation in all kinds of soil/rock including back filling with selected excavated earth duly watered & rammed. RCC M-20 with 20mm & down size H.G crusher broken chips having minimum cube strength 200Kg/Sqcm at 28 days confirming to IS-453/76 & IS-3370 for roof slab of 125mm average thick with form work as per the requied size including cost for MS reinforcement as per approved design & drawing & fixing of Pre-cast factory made manhole cover with frame (SFRC medium duty) for opening of 500mm including cost of all materials, labour, T&P etc. complete as per specification excluding GST & direction of Engineer-in-charge. Inner size 750mm x 750mm x 750mm depth |
| 159 | External Water Supply & SI work External Laying of Sewerage Gravity System Supply all materials,labour & T& P for construction of swerage kitchen waste pipe line trench including collection of waste water by laying of PCC (1:3:6) . all complete as per technical specification excluding GST & direction of EIC. |
| 160 | Supplying all materials, labour, T&P, fitting and fixing uPVC SWRpipes (Type-B)(Co-moulded Ring type) of approved make confirming to IS-13592/1992with ISI marked, both below & above ground level or fixing on wall surface in all floors including transportation & scaffolding etc. all complete as perspecification excluding GST & direction of the Engineer-in-charge. Make: ASTRAL/ASHIRVAD/AJAY/ SUPREME. 110mm dia pipe |
| 161 | Providing all materials, labour, T&P required for construction of RCC M-20 man hole chamber of following sizes having cube strength 200 Kg/cm2 at 28 days confirming to IS-456/2000 & IS-3370 at all locations & height using h.g. stone aggregate (Crusher broken) of 20mm & down size including machine mixing, lifting, hoisting, conveying, placing in position, mechanical consolidation, curing, de-watering (if required). The minimum thickness of RCC base slab, all side walls & roof slab shall be not less than 150mm, 150mm & 125mm (avg.) respectively. The cost shall be inclusive of rigid, levelled & plumbed centering & shuttering to required slope, allignment & size for all kinds of RCC work with steel/ ply centering materials with all bracing, ties, anchorage & supports and removing the same after required paid & placing M.S.Reinforcement HYSD bar of required dia including cutting, bending, straightening of approved quality as per approved design & drawing & tying the grills for RCC works & placing in position using binding wires (18 to 20 gauge soft drawn & cold annealed). PCC 1:3:6 with 40mm size h.g.c.b. metal of 100mm thick, moulding & shaping the channel & benching with C.C. 1:2:4 with 12mm size h.g.c.b. chips, 12mm thick cement plaster 1:3 with cement punning on inner wall surface, earth work excavation in all types of soil/rock including cement concrete cutting as per site condition, filling thefoundation base with sand duly watered & rammed, providing, fitting & fixing of pre-cast factory made man hole cover with frame ( heavy duty) for clear opening 560mm dia, providing, fitting & fixing of poly propylene steel reinforced man hole steps of approved quality & size in two parallel line of 300mm spacing in vertical wall with centre to centre 375mm (staggered) etc.all complete as per specification excluding GST & direction of EIC. Manhole chamber of Inner size 800mmx900mmx 900mm depth. |
| 162 | Supplying all material, labour, T&P and construction following sizeseptic tank with 2 years cleaning interval as per the approved drawing & specification with 500mm, 375mm &250mm thick 1st class F.B. brick in C.M.(1:6),over a bed of 100mm thick P.C.C.(1:4:8) , 150mm thick PCC (1:2:4) &40mm thick (Avg.) A.S flooring inside wall plastering with 12mm thick C.P. in C.M. (1:4) including neat cement punning, outside wall plastering with 16mm thick CP in C.M.(1:4), RCC slab of 125 mm thick (Avg.) with M-20 concrete using 20mm down graded chips with necessary reinforcement, centering and shuttering including two nos of SFRC manhole cover with frame of approved quality withinlet & outlet chamber of size 750x750x450mm ,one partition wall & two baffle walls, supply, fitting and fixing of necessary specials & fittingsTee, vent pipe, PVC foot rest including excavation of earth, in all kind of soil including bailing out water and shoring, shuttering etc. as necessary and back filling the sides of tank and filling up the chamberwith after |
| 163 | 100user Septic tank of size ( 5.7 M X 2.1 M x 1.7 M with free bord 1.30 M) |
| 164 | Supplying all materials, labour, T&P and constructing soak way pit of the following size with dry F.A brick work from buttom to invert level of inlet pipe (500 mm thick wall for 0.7 Mtr. depth & 375 mm thick wall for 0.8 Mtr. depth) and F.A brick work of 250 mm thick in CM (1:4) using F.A brick having crushing strength not less than 75 Kg/ Sqcm for the remaining height (not less than 0.5 Mtr.), 12 mm thick cement plaster (1:4) both inside & outside of top brick work, RCC 125 mm thick (avg.) cover slab in C.C. (1:1:5:3) using 12 mm size h.g. chips, fitting with factory made SFRC manhole cover ( medium duty) of size 500 mm dia, including earth work in excavation in hard soil, filling inside of the pit with 40 mm size h.g. metals upto invert level, surrounding the outside angular space with 40 mm size h.g. metal for 150 mm thick back filling the remaining portion inluding top 0.5 Mtr. with excavated selected earth, leveling the surface around the chamber with the disposal of surplus earth if any, to a distance of 50 Mtr. as per the specification, design & drawing1.5 Mtr. dia x 3.0 Mtr. deep soak way pit. |
| 165 | Wiring for circuit/submain wiring with the following mentioned size PVC insulated, copper conductor(FRLS), single core cable (Finolex/Polycab/L&T) or any other equivallent reputed make ISI marked as approved, in surface/recessed PVC conduit medium,FRLS (A Single light/fan/ex.fpoint controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-A |
| 166 | Single light/fan/ex.f point controlled by one 6A switch or first light/fan/exf/cb point or group control.modular GROUP-B |
| 167 | Single light/fan/ex.f/call bellpoint controlled by one 6A switch orfirst light/fan/exf/cb point or group control.modular GROUP-C |
| 168 | subsequent point of group controlWiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 169 | 6A Plug on the same board with complete fitting by 01 no of 6A switch & socket (modular type) & other required accessories of ISI marked as approved |
| 170 | 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type) cover,modular board & other required accessories of ISI marked as approved |
| 171 | 2x6A Plug on the separate board For computer/UPS/other powerpoint or TV point & other use for Data center/go downarea with complete fitting by 02 nos of 5A switch & socket(modular type) cover,modular board & other required accessories of ISI marked as approved |
| 172 | Supplying and fixing 15/16A modular socket with 15/16A Switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 173 | Wiring for circuit/submain wiring with the following mentioned size PVC insulated, copper conductor(FRLS), single core cable (Finolex/Polycab/L&T) or any other equivallent reputed make ISI marked as approved, in surface/recessed PVC conduit medium,FRLS (AKG or any other equivallent reputed make ISI marked as approved) FRLS as required. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. |
| 174 | 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor. (BDB to LSB/LIGHT CKT/5A PLUG/HIGH WAY light point) |
| 175 | 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 4 sq. mm copper wire for earth continuty conductor. |
| 176 | 2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 6 sq. mm copper wire for earth continuty conductor.(LFDB TO LBDB) |
| 177 | 2 nos single core 10 sq. mm copper wire for phase and neutral and 01 nos of single core 6 sq. mm copper wire for earth continuity conductor.(FLOOR PANEL TO BDB) |
| 178 | 4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuty conductor.(LFDB TO LBDB/power unit/point) |
| 179 | 4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuty conductor.(LFDB TO FLOOR PANEL TO TPN BDB/indivisual power) |
| 180 | 4 nos single core 16 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuty conductor.(FLOOR PANEL TO TPN BDB) |
| 181 | Supply, delivery, installation & testing of AC boards consisting of 1 No 20-A DP Modular switch with indicator and 1 No 16A Moular socket in indivisual Modular G.I Box making good the damages caused complete as required and as per direction of Engineer-in-charge. |
| 182 | Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. Legrand/Hager/Siemensmake |
| 183 | Supplying and fixing 32 amps, 415 volts, TPN, industrial type socket outlet, with 4 pole and earth metal enclosed plug top along with 32 amps. C-series, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. Legrand/Hager/Siemensmake |
| 184 | Laying and Jointing PVC Pipe. Heading |
| 185 | 20 MM |
| 186 | 25 MM |
| 187 | Supply and fixingmodular type indicator on the existing switch box/cover of Anchor make. |
| 188 | Supplying and installation of AC starter Modular type,L&T make or any other equivalent reputed make as approved coil voltage-415 Volt A.C. & O/L range of 9-14A range on mod Box of suitable size including moudlar cover. |
| 189 | Light fitting & Fixture |
| 190 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep with louvers (Havells makeor any other equivalent reputed make star rated as approved) of exhaust fan in the existing wall, including fixing & conntection. |
| 191 | Supplying, installation, testing and commssioning of 1400 mm sweep white/milky colour ceiling fan of Havells velocity/CROMPTRON JURA Make or any other equivalent reputed make star rated as approved including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required.(With fan Regulator) |
| 192 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan of Havells velocity/CROMPTRON JURA Make or any other equivalent reputed make star rated as approved including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required.(With fan Regulator) |
| 193 | Supplying and fixing of18 Watt LED round Surface Fittings CAT No. LD80-171-XXX-60-SM , WIPRO make or equivalent and any other reputed make of approved quality including supply and fixing of led lampwith connection etc.as required. |
| 194 | Supplying and fixing of18 Watt LED round Recessed Fittings CAT No. LD80-171-XXX-60-XX****** , WIPRO make or equivalent and any other reputed make of approved quality including supply and fixing of led lampwith connection etc.as required. |
| 195 | Supplying and fixing of20 Watt LED Tube light Fittings CAT No. CAT No. LL20-281-XXX-65AL1** , WIPRO make or equivalent and any other reputed make of approved quality including supply and fixing of led lampwith connection etc.as required. |
| 196 | Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 2x10 cm . |
| 197 | Supplying and fixing of following mentionedway, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts, on surface/recess, complete with terminal blocks, duly prewired with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Legrand/L&T/Siemens/HAVELLS make, or any other equivallent A catagories reputed make ISI marked as approved |
| 198 | 4 way, Double Door TPN DB (FOR POWER) |
| 199 | 12 way, Double Door SPN DB (FOR LIGHT ) |
| 200 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Legrand/L&T/Siemensmake or any other equivallent A catagories reputed make ISI marked as approved in the existing MCB DB complete with connections. |
| 201 | Supplying and fixing 63 Amps rating, 4P, 415 volts,ISOLATOR Legrand/L&T/Siemens make or any other reputad equevallent A catagoriesmake ISI marked as approved in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 202 | Supplying and fixing 25Amps DP 240 volts, RCCB,30mA Legrand/L&T/Siemensmake or any other reputad equevallent A catagoriesmake ISI marked as approved in the existing MCB DB complete with connections. |
| 203 | Supplying and fixing 40Amps DP 240 volts, RCCB,30mA Legrand/L&T/Siemensmake or any other reputad equevallent A catagoriesmake ISI marked as approved in the existing MCB DB complete with connections. |
| 204 | Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITHcharcoal and salt) as required. |
| 205 | Supply of materials and installation of pipe earth electrode made out of 40mm dia class B G.I. pipe of 4.5metre long with arrangements for fitting/ terminationofG.I. flat / wire withG. I. nutbolts& washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge. |
| 206 | Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required. |
| 207 | Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. |
| 208 | Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required. |
| 209 | Incomer:1 63A 4P MCCB(25 KA) with adjustable thermal setting+NL |
| 210 | 1 no. 32A 4P onload change over switch |
| 211 | Bus bar: 4 nos. 150A Busbar duly sleeved |
| 212 | Outgoing: 2 Nos 125A 3P MCCB with adjustable thermal setting |
| 213 | 1 No 63A 4P MCB.\"C\" (10kA) |
| 214 | 1 Nos 40A 4P MCB.\"C\" (10kA) |
| 215 | 2 Nos 32A 2P MCB \"C\"(10kA) |
| 216 | 3 Nos 6-32A SP MCB \"C\"(10kA) |
| 217 | Instruments: 2 set.LED type phase indicating lamps with control fuses |
| 218 | 1 no.60/5ACT operated Digital ammeter |
| 219 | 1 no.0-500V Digital voltmeter |
| 220 | Complete duly factory wired as per SLD and panel should have proper earth by suitable rated copper flat. |
| 221 | Supplying, laying & testing of following size of PVC insulated XLPE shethed / striparmoured aluminium / Copper conductor power cables of 1100 volt grade laid directly unground with sand cushioning, brick protection, clamped on surface of the walss / columns / existing RCC / inside masonry cable trenches / on the cable tray /throuth G.I Pipes / hume pipes / PVC pipes as the case may be, including cost of shaddles/ clamps/ markers etc but excluding the cost of G.I. Pipes / Hume pipes cpmplete with making good to the damages as required and as per direction of Engineer-in-charge. 3core x 1.5 sq mm copper unarmoured cable. |
| 222 | 4 core x 16 sq mm Aluminium armoured Cable. |
| 223 | Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable. 4 core x 16 sq mm Aluminium armoured Cable. |
| 224 | Providing and laying of fallowing dia HDPE pipe (medium class) in ground complete with HDPE fitting incl. trenching(75 mm depth)and refilling. 63 mm Dia, PN-6, PE-80, HDPE pipe |
| 225 | Supply of materials, Fixing of G.I perforated cable tray along with hanging arrangements & supports fabrication complete. For following sizes. 100x50x50x1.6mm thick. |
| 226 | Supply and laying of CAT6 UTP LAN cable protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required(1 run) |
| 227 | Supply & laying of the 4 pair,0.5 sqmm telephone cables in existing surface/ recessed conduit etc. as required. |
| 228 | Supplying and laying of co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. |
| 229 | Supply of Material and installation of RJ 45 UTP information outlet.make Legrand Mylinc model. |
| 230 | Supply, delivery, installation & testing of telephone outlet boards, containing a clip-in type modular telephone socket (RJ-11) with top fixed on metallic concealed block, including connection and making good the damages caused complete as requiredas required. and as per the direction of Engineer in charge, make Legrand Mylinc model. |
| 231 | Supply of Material and installation of TV socket outlet. make Legrand Mylinc model. |
| 232 | Supplying & Commissioning of Telephone Hand Set. |
| 233 | Supplying & installationof 100 pair KRONE make moudles with locking & key arrangements fabricated with MS sheet & powder coated to be fixed on concealed manner incl. good the damages. |
