Const. Of 650 Bedded Teaching Hospital At New Govt. Medical College, Bhawanipatna, Dist. Kalahandi ( Incl. Const. Of Attendance Rest Shed, Aahar Centre, Mortuary, Ess, Internal Road, Compound Wall, Box Cell Bridge, Drain, Landscaping , Bhawanipatna, Kalahandi-Odisha

TDR : 30229757

Tender Notice
Corrigendum Details
BOQ

Expired

Bhawanipatna, Kalahandi , Odisha

Tender Brief : Corrigendum : Const. Of 650 Bedded Teaching Hospital At New Govt. Medical College, Bhawanipatna, Dist. Kalahandi ( Incl. Const. Of Attendance Rest Shed, Aahar Centre, Mortuary, Ess, Internal Road, Compound Wall, Box Cell Bridge, Drain, Landscaping

Document Fees
₹ 10000 /-

EMD
Refer document

Tender Value
₹ 180.30 Crore /-

Submission Date
11-01-2022

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	07-01-2022	Super spread for spefication of MGPS	Other	11-01-2022
2	31-12-2021	SPECIFICATION FOR MGPS	Other	11-01-2022
3	17-12-2021	2ND CORRIGENDUM	Date	11-01-2022
4	16-12-2021	BRIEF SCOPE	Other	31-12-2021
5	15-12-2021	ARCHITECTURAL DRAWING7	Other	31-12-2021
6	15-12-2021	ARCHITECTURAL DRAWINGS6	Other	31-12-2021
7	15-12-2021	ARCHITECTURAL DRAWINGS5	Other	31-12-2021
8	15-12-2021	ARCHITECTURAL DRAWINGS4	Other	31-12-2021
9	15-12-2021	ARCHITECTURAL DRAWINGS3	Other	31-12-2021
10	15-12-2021	ARCHITECTURAL DRAWINGS2	Other	31-12-2021
11	15-12-2021	ARCHITECTURAL DRAWINGS	Other	31-12-2021

Name of Work: Construction of650 Bedded Teaching Hospital at New Govt. Medical College, Bhawanipatna, District Kalahandi (Including Construction of Attendance Rest Shed, Aahar Centre, Mortuary, ESS, Internal Road, Compound Wall, Box cell Bridge,Drain, Landscaping etc.) for the year 2021-22.

Sl. No.	Item Description
1	CIVIL WORKCleaning and grubbing road land including uprooting vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness
2	Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.50m initial lift including rough dressing breaking clods maximum 5cm to 7cm & laying in layers not exceeding 0.3m depth for the work complete including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of thewater pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.
3	Upto 0 to 1.5 M Depth
4	Upto 3.0 M Depth
5	From 3.0 M to 6.0 M depth
6	Back Filling of surplus excavated earth at work site by initial lead of 50.00mtr and initial lift of 1.50mtr including cost of all labour T&P required for the work etc. complete as directed by Engineer-In-Charge
7	Supplying and filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge.
8	Fillingwith available excavated earth (excluding hard rock/Ordinary rock in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m
9	Supplying and filling in plinth with Hard muram/ Hard copra under floors including, watering, ramming consolidating and dressing complete dressing complete.
10	Preconstruction antitermite treatment tothe building underconstruction by providing1: Treating the bottom and the sides (up to 30cm hight of the excavated trench©litter per sqm of the surface area. Staa=e 2: After masonry/RCC work, the backfill in the immdiate contact with the foundationstructure treatment .5 litter per sqm. of the vertical surface of the substructure for each side. Staa=e 3: surface treatment by spreading emulsion over the plinth area beforelaying the base concrete under floors ©.0 litres/Sqm. Staa=e 4: Pumping the emulsion in plinth masonry on filling side at floor junction5 litres/Sqm.Stage 5: Pumping the emulsion from outer side of the plinth below ground alround the masonry <©.0 litres/Sqm as per I.S. 8944 Emulsion.(Ichlo-rpyrifos: 19 water with five years serv-ice guarantee (Measurements to be taken for plinth area)
11	Making plinth protection 50mm thick of cement concrete grade M10 over 75mm bed of dry metal ballast 40mm nominal size well rammed and cons-olidated and filled with sand including finishing the top smooth (with 20mm nominal size graded stone aggregate.
12	Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties of all materials and cost of all labours,labour cess, T&P etc complete as per the direction of the Engineer-in-charge.
13	Plain/ Reinforced cement concrete M-15nominal mix with crushed stone aggregates to 40mm nominal size mechanically mixed placed in foundation and compacted by vibration including curing for 14 days as per specification & direction of Engineer-in-charge.
14	Plain/ Reinforced cement concrete M-15nominal mix with crushed stone aggregates to 20mm nominal size mechanically mixed placed in foundation and compacted by vibration including curing for 14 days as per specification & direction of Engineer-in-charge.M I5 - Grade concrete.With 20mm nominal size graded stone aggregate.
15	Below Foundation/Footing
16	Below Grade Slab
17	R.C.C. work of M-20 in following works using 12 mm. to 20 mm. (½” to ¾”) size (20 mm. not to exceed 25%) hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per the direction of the Engineer-in-charge.
18	Retaing wall foundation
19	Super structure
20	Bed
21	Wall
22	Cover slab
23	Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed andcleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portlandslag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties of all materials and cost of all labours, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. (Using Batching Plant,Transit Mixer, and Concrete Pump).
24	Boxcel foundation
25	Sub structure
26	Superstructure
27	Safety Kerb
28	Column Footing/Rafts
29	Grade slab
30	Column
31	Ground Floor
32	1st Floor
33	2nd Floor
34	3rd Floor
35	4th Floor
36	5th Floor
37	6th Floor
38	Terrace Floor
39	Shear wall
40	Ground Floor
41	1st Floor
42	2nd Floor
43	3rd Floor
44	4th Floor
45	5th Floor
46	6th Floor
47	Terrace Floor
48	Plinth Beam
49	Lintel
50	Ground Floor
51	1st Floor
52	2nd Floor
53	3rd Floor
54	4th Floor
55	5th Floor
56	6th Floor
57	Terrace Floor
58	Chajja
59	Ground Floor
60	1st Floor
61	2nd Floor
62	3rd Floor
63	4th Floor
64	5th Floor
65	6th Floor
66	Terrace Floor
67	Roof Beam
68	Ground Floor
69	1st Floor
70	2nd Floor
71	3rd Floor
72	4th Floor
73	5th Floor
74	6th Floor
75	Terrace Floor
76	Roof Slab
77	Ground Floor
78	1st Floor
79	2nd Floor
80	3rd Floor
81	4th Floor
82	5th Floor
83	6th Floor
84	Terrace Floor
85	Staircase
86	Ground Floor
87	1st Floor
88	2nd Floor
89	3rd Floor
90	4th Floor
91	5th Floor
92	6th Floor
93	Shelves
94	Ground Floor
95	1st Floor
96	2nd Floor
97	3rd Floor
98	4th Floor
99	5th Floor
100	6th Floor
101	Providing and laying in position machine batched, machine mixed cement concrete (BMC) of M-30 grade for reinforced cement concrete work using cement content as per approvedmix design, including use of admixtures in recommended proportions as per IS 9103 to accelerate/retard setting improve workability of concrete without impairing strength and durability as per direction of Engineer-in-charge and pumping of concrete to site of laying and finishing but excluding the cost of centering, shuttering, and reinforcement. (Note:- minimum cement content is 330kg/cum.)
102	Footings ,Raft ,Stitch Slab & Grade Slab
103	Retaining Wall
104	Plinth & Tie Beam
105	Column
106	Ground Floor
107	1st Floor
108	2nd Floor
109	3rd Floor
110	4th Floor
111	5th Floor
112	Shear Wall
113	Ground Floor
114	1st Floor
115	2nd Floor
116	3rd Floor
117	4th Floor
118	5th Floor
119	Lintel
120	Ground Floor
121	1st Floor
122	2nd Floor
123	3rd Floor
124	4th Floor
125	5th Floor
126	Roof Beam
127	Ground Floor
128	1st Floor
129	2nd Floor
130	3rd Floor
131	4th Floor
132	5th Floor
133	Roof Slab
134	Ground Floor
135	1st Floor
136	2nd Floor
137	3rd Floor
138	4th Floor
139	5th Floor
140	Ramp & Staircase
141	Ground Floor
142	1st Floor
143	2nd Floor
144	3rd Floor
145	4th Floor
146	5th Floor
147	PT Beam
148	1st Floor
149	2nd Floor
150	4th Floor
151	5th Floor
152	PT Slab
153	1st Floor
154	2nd Floor
155	4th Floor
156	5th Floor
157	UG Tank
158	Raft
159	R.C.C Wall
160	Roof Slab
161	Ramp & Staircase
162	SewageTreatment Plant
163	R.C.C Wall
164	Top Slab
165	OHT Tank
166	Bottom slab
167	Wall
168	Top Slab
169	Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. includingbending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
170	Ground Floor
171	1st Floor
172	2nd Floor
173	3rd Floor
174	4th Floor
175	5th Floor
176	6th Floor
177	Terrace Floor
178	Post tensioning works including decoiling the strands,cutting the strands to the required lengths,supply & laying of duct(0.3mm thick sheating) including making the water tight joint using couplers and inserting of HT strands, profiling using chair bars, fixing live end anchorages including the supply of suitable stressing anchorages,tendons, grout vents, making dead end anchorages including flowering the strands, fixing tendons support bars, supervising the fixing of anti bursting reinforcement, stressing the cables, end trimming,patching, cleaning of duct iusing air compressor and grouting the cables/tendons with cement and non shrink admixtures, with all required plant & machinaries , tools and tackles, consumables to complete the work in all respects and cost to include the marking ofstrandswithOBD paints on the soffit of slab.
179	PT strands for slab grade 1848 N/mm2 (Steel)
180	PT Beam
181	Ground Floor
182	1st Floor
183	2nd Floor
184	4th Floor
185	5th Floor
186	PT Slab
187	1st Floor
188	2nd Floor
189	4th Floor
190	5th Floor
191	Dismantling of Reinforced Cement Concrete work to any depth and width, at all levels below & above Ground Level of any shape, removal of debris, disposing the same away from the site, loading and unloading, making the surface good etc. complete using low vibration chipping machine only with necessary scaffolding, dampening materials to avoid impact due to falling of concrete materials, water, power charges, cleaning the surface, preparation of surface etc. Rate shall include cutting of reinforcement and stacking the same at site and disposing the unserviceable materials/debris away from the site by mechanical means including loading, unloading, clearing the site etc. complete, as directed.
192	RCC Footings
193	Retrofitting WorksWith Low vibration chipping machine
194	Vertical or horizontal rebaring in RCC surface by drilling method of dia 20mm upto a depth of 300mm roughing the covered hole surface and cleaning by compressed air with required accessories to blow from bottom of the cover hole and applying the adhessive HILTI-HY 170 conforming by europian technical assesment (ETA 16/0142) and inserting MS tor steel bar of 16mm dia as per requirement into the hole in a rotational manner with required testing etc complete as per the direction of EIC.
195	300mm depth
196	Vertical or horizontal rebaring in RCC surface by drilling method of dia 25mm upto a depth of 300mm roughing the covered hole surface and cleaning by compressed air with required accessories to blow from bottom of the cover hole and applying the adhessive HILTI-HY 170 conforming by europian technical assesment (ETA 16/0142) and inserting MS tor steel bar of 20mm dia as per requirement into the hole in a rotational manner with required testing etc complete as per the direction of EIC.
197	20mm dia bars Up to 300mm depth in RCC Foundation
198	Micro Concrete
199	Providing and applying the duel shrinkage-compensated, cementitious micro concrete of approved make non shrink material M40 grade site mix, high strength, highflow, single component cementitious formulation. The repair micro-concrete shall have compressive strength minimum of 45 MPa at 7 day. The repair mortar shall require epoxy bonding agent etc as per manufacturer\"s specification and as per the directions of engineer in charge. cost to include necessary core cutting / making holes for packing micro concrete at junctions, sealing the same etc., complete including all leads & lifts. Cost to include providing and applaying Dr Fixit Rust remover solution or equivalent to all the exposed existing reinforcement steel before doing concreting.
200	M40 grade
201	Planted Columns in All Levels
202	Fly Ash brick masonry in cement mortar (1:4) in foundation & plinth using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
203	Fly Ash brick masonry in cement mortar (1:4) in super structure using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
204	Ground Floor
205	1st Floor
206	2nd Floor
207	3rd Floor
208	4th Floor
209	5th Floor
210	6th Floor
211	Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
212	Ground Floor
213	1st Floor
214	2nd Floor
215	3rd Floor
216	4th Floor
217	5th Floor
218	6th Floor
219	Terrace Floor
220	Providingand laying autoclavedaerated fly ash cementconcret (AAC)masonryblocks(Sizesinmmlength400,500,600,Height 200,250,300,Width,200,250) confirming toIS2185PART-3,havingcompressive strengthnotlessthan30kg/sq-cmand water absorptionnot more than 10 %,jointedwith ready mix build fast and eco friendly wet mix pre-polymerized/polymer modified adhesive(make such as Kerakoll,Ultratech,Magicrete,Fairmate, BallEndura, Latecrete or equivalent ) having compressive strengthof not lessthan 50 kg/sqcm and ensuringlonglasting thermalinsulationof accordingto Europeannorms(EN13501-2, suitable forhighperformance ofexternal &internalconcrete masonry walls; joint having thickness in thin layer of 2 mm to 4 mm betweenmasonryunitsin superstructureincludingstrikingjoints, racking out joints faces and scaffoldingetc. complets.there is no need to pre-wet the blocks or post cure the wall with water.
221	Ground Floor
222	1st Floor
223	2nd Floor
224	3rd Floor
225	4th Floor
226	5th Floor
227	Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.
228	Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
229	Ground Floor
230	1st Floor
231	2nd Floor
232	3rd Floor
233	4th Floor
234	5th Floor
235	6th Floor
236	Terrace Floor
237	Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
238	Ground Floor
239	1st Floor
240	2nd Floor
241	3rd Floor
242	4th Floor
243	5th Floor
244	6th Floor
245	Terracefloor
246	Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
247	Ground Floor
248	1st Floor
249	2nd Floor
250	3rd Floor
251	4th Floor
252	5th Floor
253	6th Floor
254	Terrace Floor
255	Providing 20 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
256	Ground Floor
257	1st Floor
258	2nd Floor
259	3rd Floor
260	4th Floor
261	5th Floor
262	Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6.7mm & down grade size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.
263	Ground Floor
264	1st Floor
265	2nd Floor
266	6th Floor
267	Supplying , Fitting & FixingGCI Sheet of 0..4 mm thick in Roofing drilling hole in wind ties including fixing of ridgesvalleys wind ties etc with cost, conveyance, taxes of all materials, cost of all labour,labour cess, T&P etc. required for the work complete as per specification and direction by Engineer in Charge.
268	TATA PRAVESH DOOR-Supplying fitting and fixing pressed steel door as per IS 4351 manufactured from mild steel sheets from Plain grade, Lock forming (GPL), Zinc coating 120 g/m2 inclusive of both sides of thickness of 1.25mm conforming to IS 277 with pretreated and phosphate by chemical means conforming to IS 1477 (Part 1). consisting of hinge jamb, lock jamb, head and if required angle threshold and surface thoroughly cleaned, free of rust, mill-scale dirt oil, mortised, reinforced drill and tapped for hinges as per drawing etc powder coated conforming to IS 13871, door framed filled with concrete/mortar as directed by the Engineer-in-charge . The frame size and shape (profile) shall be as per drawing. Supplying fitting and fixing pressed steel door shutter as per IS 277 Constructed from 0.80mm/0.60mm thick Skin pass Galvanized Iron Bottom Sheet and Top Sheet Constructed from 0.80mm/0.60mm thick Skin pass Galvanized Embossed Iron (Conform to IS 277) formed to provide a 46mm thick fully flush, double skin door shell with Lock Seam joints at stile edges. In-fill of Honeycomb Kraft Paper is used to give the required rigidity and effective acoustic insulation. Shutter willl be coated with polyester powders of pure polyester or polyurethane powder for powder coating of thickness 60 – 65 microns (Dry film thickness). After Completion of powder coating process the door frames and shutters are as directed by the Engineer-in-charge . The shutter size and shape (profile) shall be as per drawing.Aldrop to be provided as required.TOWER BOLTS (DOUBLE DOOR):Concealed extended lever action flush bolts provided on the top of the door to the leading stile edge.DOOR STOPPER: Lever Type Door Stopper is used to hold a door open or closed, or to prevent a door from opening too widely.HINGES: Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter.
269	35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
270	Ground Floor
271	1st Floor
272	2nd Floor
273	3rd Floor
274	4th Floor
275	5th Floor
276	2hr Fire rated Door
277	FIRE RATED DOOR-46 mm thick steel Check door of 120 minutes Fire rating confirming to BS ; 476 Part-22and IS : 3614 Part-II Fabricated with 2 nos 20 SWG galvanized steel sheet sandwiching with proprietary fire resistant insulation materials in-between. The door frames are manufactured from 16SWG galvanized steel sheet pressed form to double rebate profile of size 100mm x 57mm. The door frame and door shutter are fitted with SS BALL BEARING HINGES (100X75X3MM) and are coated with one coat of fire and corrosion resistant primer. 2hr fire rated Wired vision glass (200X300X6mm, 304 Grade SS ball bearing Hinges (100X75X3mm), Fire rated door closer, External trim with locking arrangements. Door : TATA PRAVESH Hardware : GEZE
278	All doors and frames shall be finished with etched primer coating, stove zinc phosphate primer and thermosetting polyurethane aliphatic grade paint of approved colour. The door leaf and frame shall have passed minimum 250 hours of salt sprey test. Rate should include supply and installation of door and hardware set as mentioned in the Ironmongery schedule and details in the drawings.
279	Ground Floor
280	1st Floor
281	2nd Floor
282	3rd Floor
283	4th Floor
284	5th Floor
285	WINDOWS WORKS
286	Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
287	three track panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm).W03, W04
288	Ground Floor
289	1st Floor
290	2nd Floor
291	3rd Floor
292	4th Floor
293	5th Floor
294	6th Floor
295	Providing and fixing UPVCframed louvered windows of NCL VEKA LTD./ FENESTA / KOMMERLINGor any other approved make with all the approved accessories and locking arrangements as per the manufacturersspecifications at all levels and heights with upvc louvers of approved make ,etc complete as per thedetails given in the drawing & as per direction of Engineer-in-Charge.W02, W05
296	Ground Floor
297	1st Floor
298	2nd Floor
299	3rd Floor
300	4th Floor
301	5th Floor
302	6th Floor
303	Supplying Fitting, fixing of UPVC (NCL VEKA LTD./ FENESTA / KOMMERLING) Casement Door with top fixed-60 series duly manufactured using UPVC reinforced profiles of 60mmX55mmX2.5mm for outerframes, 102mmX60mmX2.25mm for casement Door sash profile and 74mmX60mmX2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50mm micronsof minimum thickness of 2mm prefabricated& welded through fusion welding the DOOR sash shall be fitted with 12mm thick WPC board of Greenply make duly fixed with EPDM weathering seal resistant accesories like dipping locking system made of aluminium one number per set of sashesand the system is t be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site, etc including cost of all materials, accesories, labour charges and product conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standards & as per direction of Engineer-in-Charge.
304	Providing and supplying aluminium extruded tubular and other aluminium section as per the architectural drawings and approved shop drawing, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474, INCLUDING SUPER DURABLE POWDER COATING OF 60-80 micron conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-charge. (The item includes cost of material such as cleats, sleeves, screws etc. necesary for fabrication of extruded aluminium framework. Nothing extra shall be paid on this account, etc.) complete as per direction of Engineer-in-charge.
305	STRUCTURAL GLAZING
306	Ground Floor
307	1st Floor
308	2nd Floor
309	3rd Floor
310	4th Floor
311	5th Floor
312	Providing, assembling and supplying vision glass panels (IGU) comprising of hermitically sealed 6-12-6mm insulated glass double glazed vision panel unit of size and shape as required and specified comprising of an outer heat strengthened float glass 6mm thick of approved colour and shade with reflective soft coating on surface to of #approved colour and shade, and inner heat strengthened clear float glass 6mm thick, spacer tube 12mm wide, dessicant, including primary seal and secondary seal (structural silicon sealant etc all complete for the required performance as per the architectural drawing as per approved sub drawing, as specified as directed by Engineer-in-charge. The IGUs shall be assembled i the factory/ workshop of the glass processor(payment for fixing of IGU panel in the curtain glazing is included in the cost of item no. 26.2for payment, only the actual area of the glass on face of the glass panel(excluding the area of the grooves and weather silicon sealant) provided and fixed in position, shall be measured in sqm.
313	Coloured tinted float glass 6mm thick substrat with reflective sub coating on face #2+ 12mm air gap+6mm heat strenghthened clear glass of approved make having properties as visible light transmitance (VLT) of 25-35 %, light reflection internal 10-15 % light reflection external 10-25 % shading coefficient (0.25-0.28) and L value of 3-3.3 w/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement, etc complete as the direction of Engineer-in-charge With 6.0 mm thick glass panes.
314	Ground Floor
315	1st Floor
316	2nd Floor
317	3rd Floor
318	4th Floor
319	5th Floor
320	Extra for openable side/ top hung vision glass panel (IGU) including providing and supplying at site all accessories and hardware fo the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 point cremone locking sets with stainless steel plate, handle, buffers, etc. including neccesary stainless steel screw/ fastener, nut bolt, washers, etc. complete as per the architectural drawing and as per approved sub drawing as specified and directed by Engineer-in-charge.With 6.0 mm thick glass panes.
321	Ground Floor
322	Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre ,shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
323	12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595mm, made of Gypsum plasterboard; manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on theback side with all edges sealed with the face side PVC film which goes around and wraps theedges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.
324	Ground Floor
325	1st Floor
326	2nd Floor
327	3rd Floor
328	4th Floor
329	5th Floor
330	Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spacedjoints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
331	GI Metal CeilingLay in plain Tegular edgeGlobal white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made ofG I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
332	Ground Floor
333	3rd Floor
334	4th Floor
335	Providing and fixing chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails on vertical and horizontal junctions of RCC and brick wall including scaffolding and all lead and lift etc. complete before plastering .
336	Ground Floor
337	1st Floor
338	2nd Floor
339	3rd Floor
340	4th Floor
341	5th Floor
342	6th Floor
343	Terrace Floor
344	Providing and fixing in position 12 mm thick bitumen impregnated fiber board conforming to IS:1838 including cost of primer, sealing compound in expansion joints.For Expansion Joint of 50mm wide.
345	Ground Floor
346	1st Floor
347	2nd Floor
348	3rd Floor
349	4th Floor
350	5th Floor
351	Providing and filling gap in expansion joint between RCC /Stone /Ceramic tiles /Granite /Marble by providing silicon sealant over backer rod of approved quality weather sealant as per drawing and direction of engineer in charge up to 50 mm width & 12 mm depth.
352	Ground Floor
353	1st Floor
354	2nd Floor
355	3rd Floor
356	4th Floor
357	5th Floor
358	Terrace
359	Providing and fixing 200 mm wide and 3.15 mm thick Aluminum fluted strips sheet covering over expansion joints with iron screws as per design & as per direction of Engineer-in-Charge.
360	Ground Floor
361	1st Floor
362	2nd Floor
363	3rd Floor
364	4th Floor
365	5th Floor
366	Terrace
367	Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge :
368	With stainless steel cover plate - minimum 1.25 mm thickness
369	Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area ofdoor shutter to be measured) : Rectangular or square.
370	Ground Floor
371	1st Floor
372	2nd Floor
373	3rd Floor
374	4th Floor
375	5th Floor
376	Providing and fixing Aluminium Sliding Door Bolts,ISI marked anodised(Anodic Coating not less than Grade AC 10 AS per IS 1868,Transparent or dyed to required colour or shade,withnuts and screws etc. complete :300x16 mm
377	Ground Floor
378	1st Floor
379	2nd Floor
380	3rd Floor
381	4th Floor
382	5th Floor
383	Providing and fixing ISI marked oxidised M.S . door latchesConfirming to IS 5930 with screws etc. complete :300x16 mm
384	Ground Floor
385	1st Floor
386	2nd Floor
387	3rd Floor
388	4th Floor
389	5th Floor
390	Providing and fixing ISI marked Chromium plated fittings (Brass) (I.S.I.)Handle (I.S.I)with necessary screws etc. complete :125mm with 175 x 32mm plate
391	Ground Floor
392	1st Floor
393	2nd Floor
394	3rd Floor
395	4th Floor
396	5th Floor
397	Providing and fixing Brass tower bolt (Barrel type) (I.S.I.) with necessary screws etc. complete :250x10 mm
398	Ground Floor
399	1st Floor
400	2nd Floor
401	3rd Floor
402	4th Floor
403	5th Floor
404	Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade with necessary screws etc. complete. Twin Rubber stoper
405	Ground Floor
406	Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Rate includesrecess cutting in floor and making good the same wherever required.
407	Ground Floor
408	Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete.
409	Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over a coat of redoxide primer as per approved drawing and designwith cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.
410	Ground Floor
411	1st Floor
412	2nd Floor
413	3rd Floor
414	4th Floor
415	5th Floor
416	6th Floor
417	Terrace Floor
418	Truss
419	Supplying and Fixing of Rolling Shutter of approaved make, made of required size M.S laths, interlock together through their entire length and jointed together at the end by end locks , mounted onspecialy design pipe shafts with brackets , side guides and arrangements for inside and outside locking with push and pull operation..complete, including the cost of providing and fixing necessary 27.5cm long wire springs manufactuired from high tensile steel wire of adeuate strength conforming to I.S 4454 Part-I and M.S. Top cover of required thickness for rolling shutters etc. complete as per direction of engineer in charge.
420	R.S
421	Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing andmakingcurvature(whereverrequired)andfittingthesamewith necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc.,of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
422	Ground Floor
423	1st Floor
424	2nd Floor
425	3rd Floor
426	4th Floor
427	5th Floor
428	6th Floor
429	Grading roof for water proofing treatment with
430	Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6.7mm & down grades size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.
431	Supplying, fitting and fixing Vetrified Tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm Color / Printed series (Homogenous) of approved make (JOHNSON /VARMORA / SOMANY/ KAJARIA/ OASIS or equivalent ) in floors on 20mm thick bed of C.M. (1:4) (1cement:4course sand) and filling the joint with white cement mixed with pigment to match the shades of the tile including cost of all materials, labour, labour cess, T&P etc. required for the work completein all respect as directed by the Engineer in charge. (In light shade glossy/rustic/satin finish)
432	Ground Floor
433	1st Floor
434	2nd Floor
435	3rd Floor
436	4th Floor
437	5th Floor
438	6th Floor
439	Providing, fitting, fixing Vetrified Tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm Color / Printed series (Homogenous)of approved make (JOHNSON / VARMORA / SOMANY/ KAJARIA/ OASIS or equivalent )as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties of all materials all labour,labour cess complete in all respects.
440	Ground Floor
441	1st Floor
442	2nd Floor
443	3rd Floor
444	4th Floor
445	5th Floor
446	6th Floor
447	Supplying and fixing in floor, tread, steps and landing with Ceramic Floor tiles of special plain/printed series of premium grade having thickness 7mm to 8mm confirming to IS 13755 and of size 300mm x 300mm / 400mm x 400mm of approved make (JOHNSON / VARMORA / SOMANY/ KAJARIA/ OASIS or equivalent ), laid over 20mm thick bed of cement mortar (1:4) (1cement:4course sand)and filling the joint with white cement mixed with pigment to match the shades of the tile including cost, conveyance, royalties, taxes of all materials, all labour, hire and running charges of all machineries,labour cess, T&P sundries complete as per specifiction and direction of Engineer-in-Charges.
448	Ground Floor
449	1st Floor
450	2nd Floor
451	3rd Floor
452	4th Floor
453	5th Floor
454	6th Floor
455	Supplying and fixing in dados skirting and risers of steps with Ceramic tiles of special plain/printed series of premium grade having thickness 7mm to 8mm confirming to IS 13755 and of size 300mm x 300mm / 400mm x 400mm of approved make (JOHNSON / VARMORA / SOMANY/ KAJARIA/ OASIS or equivalent ), laid over 12mm thick bed of cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tile including cost, conveyance, royalties, taxes of all materials, all labour, hire and running charges of all machineries,labour cess T&P sundries complete as per specifiction and direction of Engineer-in-Charges.
456	Ground Floor
457	1st Floor
458	Fixing of Chequered tiles of premium grade having thickness 7mm to 8mm confirming to IS 13755 of size 30cm x 30cm special plain / printed series in floors over 20mm thick bed of cement mortar 1:4 jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respects as per direction of Engineer-in-Charge.
459	Providing and laying gang saw cut 18mm thick, mirror polished pre moulded (wherever required) and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in flooringlaid over 20mm thick base of cement mortar 1:4 (1cement : 4 sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.
460	Fixing granite tiles of approved dimension area above 0.4 sqm (20mm thick) in floor, treads of steps and landing on 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties of all materials complete in all respects as per direction of Engineer-in-Charge.
461	Ground Floor
462	1st Floor
463	2nd Floor
464	3rd Floor
465	4th Floor
466	5th Floor
467	6th Floor
468	Fixing granite tiles of approved dimension area above 0.4 sqm (20mm thick) in Dados, treads of steps and landing on 12mm thick cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects as per direction of Engineer-in-Charge.
469	Ground Floor
470	1st Floor
471	2nd Floor
472	3rd Floor
473	4th Floor
474	5th Floor
475	Fixing of Kota tiles of minium thickness 16mm thick of premium grade of size above 0.10 Sqm. in floors over 20mm thick bed of cement mortar 1:4 (1cement:4course sand)and filling the joint with white cement mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance,royalties of all materials, labour,labour cess with T&P complete in all respects as per direction of Engineer-in-Charge.
476	Ground Floor
477	1st Floor
478	2nd Floor
479	3rd Floor
480	4th Floor
481	5th Floor
482	Fixing of Kota tiles of minium thickness 16mm thick of premium grade of size above 0.10 Sqm. in Dado over 12mm thick bed of cement mortar 1:3 jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance & royalties of all materials, labour,labour cess with T&P complete in all respects as per direction of Engineer-in-Charge.
483	Ground Floor
484	1st Floor
485	2nd Floor
486	3rd Floor
487	4th Floor
488	5th Floor
489	Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.
490	Ground Floor
491	1st Floor
492	2nd Floor
493	3rd Floor
494	4th Floor
495	5th Floor
496	6th Floor
497	Terrace floor
498	Painting two coats with plastic emulsion paint over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge.
499	Ground Floor
500	1st Floor
501	2nd Floor
502	3rd Floor
503	4th Floor
504	5th Floor
505	6th Floor
506	Terrace floor
507	Wall painting two coats with Weather coat paint (1st quality) exterior grade of approved make & approved shade over a coat of primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.
508	Ground Floor
509	1st Floor
510	2nd Floor
511	3rd Floor
512	4th Floor
513	5th Floor
514	6th Floor
515	Terrace floor
516	Painting two coats to new Iron work with approved enamel paints of approved colour, shade over a coat ofprimer including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour,labour cess with T&P etc, complete as per specification & direction of Engineer-in-charge.
517	Ground Floor
518	1st Floor
519	2nd Floor
520	3rd Floor
521	4th Floor
522	5th Floor
523	6th Floor
524	Terrace Floor
525	Finishing walls with textured exterior paint of required shade.New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
526	Ground Floor
527	1st Floor
528	2nd Floor
529	3rd Floor
530	4th Floor
531	5th Floor
532	6th Floor
533	Providing and Fixing UV stabilised fibreglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated J or L hooks,bolt & nuts 8mm dia.GI plain/bituminous washers completye but excluding the cost of purlins,rafters,trussesetc.The sheets shall be manufactured out ofb2400TEX panel rovigs incorporatingminimum .3%ultra violate stabiliser in resin system under approximately 2400 psi and hot cured.They shall be of uniformto IS 10192 and IS 12866.The sheets shal be opaque or translucent,clear or pigmented,textured or smooth as specified
534	12.47.1 2 mm thick corrugated (2.5\" or 4.2\" or 6\")or step down ( 2\" or 3\" or 6\") specified
535	Structural steel work revetted ,bolted or welded in built up section,trusses and framed work including cutting,hoisting,fixing in position and apply a priming coat of approved steel primer all complete
536	Providing and laying flooring complete as per drawing and technical specification laid over cement concrete bedding (150mm thick Flat Stone aprons embaded 300mm thick concrete in M-15 with crushed stone aggregates
537	Drainage spouts complete as per drawing and technical specification of MORT&H specifcation and direction of the Engineer-in-charge
538	Bitumen expansion joint 25 mm thick as per drawing and technical specification as per clause no.2605 of MoRT&H specification and direction of the EIC
539	Providing laying of filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.22 of MoRT&H specification to a thickness not less than 600mm with small size towards the soil and bigger towards the wall and provided over the entire surface behind abutment wing walls return walls to the full height compacted to a firm condition complete as per drawing and technical specification
540	Providing and applying 2 coats of water based cement paint to unplastered concrete surface over a coat of cement wash after cleaning the surface of dirt dust, oil grease efflorescence and applying paint @ 1 Ltr for 2 sqm
541	Gravel backing to revetments complete as per drawing and technical specification for road and bridge works ARP 82 item no.25Taking output= 1cum Unit- 1cum
542	Rough stone dry packing in approns and revetmentswith cost of all materials, labour, T&P etc. complete.Including cost conveyance taxes of all materials
543	Providing weep holes in masonry/ Plain reinforced cement concrete abutment, wing wall/ return wall with 100mm dia AC pipe
544	RCC M-30 grade in railing of culvert as per approved drawing & technical specification and as per section - 1500, 1700 & 2200 of MoRT&H specification for road & bridge works (Latest Revision).
545	Reinforced cement concrete M15 grade Guard Post stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc as per Clause 804 of MoRT&H Specifications for Road & Bridge works(4th Revision)
546	Road marking with Hot applied thermoplastic compound with Reflectorising Glass beads on bituminous surface by providing and laying of hot applied thermoplastic compound 2.5mm thick including Reflectorising glass beads @ 250gms per sqm area thickness of 2.5mm.is exclusive of surface applied glass beadsThe finished surface to be level uniform and free from streaks and holes as per IRC: 35
547	Providing retro-reflectorised cautionary, Mandatory and Informatory sign boards as per IRC. 67 made of high intensity grade sheeting vide clause no. 801.3 fixed over aluminium sheeting 1.5mm thick supported on a mild steel angle iron post 75 x 75mm x 6mm size as per approved drawing as per clause no.801.08 of MoRT&H specification and direction of the Engineer-in-charge
548	A. 80cm x 60cm size Rectangular (Informatory)
549	B. 90cm size Equilateral Tringle (Mandatory)
550	C. 60cm size Circular (Cautionery)
551	D. 90cm high octagon
552	E. 30cm x 90cm hazard marker
553	Providing weep holes in brick masonry / plain or RCC abutment, wing wall and return wall with 100mm dia AC pipe extending through the full width of structure with slope of 1V : 20H towards draining face complete as per drawing and technical specification @ 1.5M interval
554	Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m
555	Loosening, levelling and compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150mm mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction
556	Construction of granular sub-base by providingGrading-IV material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (5th Revision)
557	Providing, laying, spreading and compacting graded stone aggregates to wet mix macadam specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed materials by tipper to site laying in uniform layers with Paver in sub-base/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density
558	Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer (SS) at the rate of 0.60 kg/sqm using mechanical means as per Clause 502 of MoSRT&H Specifications for Road & Bridge works (5th Revision).
559	Providing and applying tackcoat with bitumen emulsion on prepared surfaceincluding cleaning of road surface and spraying primer at the rate of 0.20kg/sqm using mechanical means as per clause no.501.5.2, 502 of MoRT&H specification and direction of the EIC
560	Providing and laying bituminous macadam with hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laid over a previously prepared surface with apaver finisherto the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per Clause 504 of MoSRT&H Specifications for Road &Bridge works (5th Revision)
561	Providing and laying Semi-dense graded bituminous concrete with hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of 60/70 penetration grade of bitumen, transporting the hot mix to work site, l;aying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per Clause 508 of MoSRT&H Specifications for Road & Bridge works (5th Revision)
562	Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drains and foundation of other structures graded and compacting
563	Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drains and foundation of other structures graded and compacting
564	Providingcompacted granular materials in shoulder by using moorum having required PI value with sand admixture if required as per approved drawing & technical specification and as per clause 407 of MoRT&H specification for road and bridge works.
565	Providing and Laying of 80mm thk CC Paver of BLOCK of M30 Grade with approved color ,pattern,design or equivalent make, laid over 50mm thick compacted sand bed including edge cutting of pavers as per design and setting with mechanical vibrations including all incidentals, etc., complete. (Basic Rate - Rs 68/Sft)
566	Providing and Laying of 60mm thk interlocking Paver of shobha or equivalent make, laid over 50mm thick compacted sand bed including edge cutting of pavers as per design and setting with mechanical vibrations including all incidentals, etc., complete. (Basic Rate - Rs 68/Sft)
567	Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
568	E.I. WORKPOINT WIRINGWiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required as per direction of Engineer-in-charge. make-.Copper conductor-make-RR cable/ KEI / Polycab/ havells/eq make,Make of switch and GI box-Schneider (Zencelo)/ Legrand(Myrus) / Panasonic (vision)/ Eq make.. warrantied for a replacement period of 10 years agaisnst defect with necessary test reports and warranty certificate(this is appilicable for all point wiring and submain wiring mentionedbelow).
569	Group A
570	Group B( Both TH & Ancillary buildings)
571	Wiring for light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
572	Primary point cntroled by SP MCB
573	Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
574	Group C( Both TH & Ancillary buildings)
575	Wiring for group controlled (looped) light point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
576	Secondary point looping from primary point cntroled by SP MCB
577	SUB MAIN WIRING
578	Receass wiring for circuit/submain wiring with the following mentioned size PVCFRLS insulated, copper conductor, single core cable (Polycab/RR/KEI/HAVELLS) or any other equivallent reputed make ISI marked as approved, inrecessed PVC conduit Heavy dutyof mentioned size (AKG/Polycab/Kinjal or any other equivallent reputed make ISI marked as approved) as required as per direction of Engg.-in-Charge..
579	2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallicheavy duty flexible conduit (LSB to LIGHT FIXTURE/POINT WIRING )(2X1.5+1X1.5)( Both TH & Ancillary buildings)
580	1 x 1.5mm2 sub main wiring for inverter connection
581	2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallicheavy duty flexible conduit.(LDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5) ( Both TH & Ancillary buildings)
582	2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallicheavy duty flexible conduit .(For PDB to PSB / Gayser Point / AC Point / Room Light Control TOCorridoor Point / DG Panel Essential Load / Facade Lighting).(2x4 + 1x1.5)( Both TH & Ancillary buildings)
583	2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallicheavy duty flexible conduit .(For Hub room DB / Wall Mounted IT Rack) (2X6+1X2.5)
584	Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
585	20 mm
586	25 mm
587	Supplying and fixing of following sizes of Flexible conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
588	20 mm
589	25 mm
590	32mm
591	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providingand fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
592	Recessed modular wiring to 5/6A socket outlet with 2x1mm2 PVCInsulatted S.C F.R multistand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit pipe with modular type switch.( For Ancillary buildings)
593	a) Group-A
594	b) on existing board
595	Recessed wiring to power plug point with 2x4mm2 PVCInsulatted S.C F.R multistand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit along with1x2.5mm2 F.R PVC insulated S.C C.U. wire for loop earthing as required.(Make of wire finolex/Anchore/Havels /HPL/V.Guard )( For Ancillary buildings)
596	S/F of computer Board consisting of 3 Nos of Modularplug and switchall accessories including recessed wiring,Cutting of wall & connection as per requirement.
597	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlet and 2 Nos. 5/ 6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
598	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 16 A modular socket outlet and 2 Nos. 16 A modular switch with indicator, connections etc. as required. (For light plugs to be used in non residential buildings).
599	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 3 Nos. 3 pin 5/6 A modular socket outlet and 3 Nos. 5/ 6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
600	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
601	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 20 A & 20 A modular socket outlet and 20 A modular switch, connections etc. as required.
602	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 No.6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
603	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 No.6 pin15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
604	Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required.
605	Supply, installation, testing and Commissioning of 1x25A, socket, 3Ph,5Pin, Industrial type controlled by 25A TPN MCB with plugtop mounted on Indoor type with IP 66 matallic box and cover interrconnection with metering etc
606	Supply, installation, testing and Commissioning of 1x32A, socket, 1Ph,3Pin, Industrial type controlled by 32A DP MCB with plugtop mounted on Indoor type with IP 66 matallic box and cover interrconnection with metering etc
607	Supply, installation, testing and Commissioning of 1x32A, socket, 3Ph,5Pin, Industrial type controlled by 32A TPN MCB with plugtop mounted on Indoor type with IP 66 matallic box and cover interrconnection with metering etc
608	Supply, installation, testing and Commissioning of 1x63A, socket, 3Ph,5Pin, Industrial type controlled by 63A TPN MCB with plugtop mounted on Indoor type with IP 66 matallic box and cover interrconnection with metering etc
609	Supply and installation of 1no.6/16 A universal socket outlet controled by 16A SP switch + 1No. 32A 3 pin 1phase Metal Clad Industrial type socket with plug top controlled by 32A DP MCB housed in a enclosure (HUB room/Communication Room/Server room)
610	LIFT(Ground Floor To Terrace) a) 4 Lights controlled from 2 nos. of Switch / RCCB b) 1 Light controlled from 2 Nos 2-way switches.c) Light fixture similar to LW03-850-XXX-57-XX- 11 W; LED Bulkhead fixture - d) 4 Nos of 16 A 3 Pin socket outlet with mounting box controlled by 16A switch.
611	LIGHT &FAN FIXTURES
612	Recessed / Surface / Wall / Ceiling Mounted Light Fixtures Supply, Installation, testing and Commissioning of luminaires complete with, lamps, ballast/drivers, starter, HPF condenser, standard down rod, connecting cord, etc.,. including all necessary fixing accessories like MS hooks, MS supports, fasteners, etc. Lights: MakeHavells/Philips/Bajaj/Crompton /Equivalentapproved make,( Fan:of model usha Allure plus (ivory/White colour)/ bajaj Regal gold NXG (ivory/white)/Havells festiva/equs(white/titanium)/equivalent make as per direction of engineer in charge. replacement warranty will be 5 years
613	S/F of9 watt LED ceilling down light complete with all other accessories etc as required
614	S/F of15 watt (1 x1) LED ceilling down light complete with all other accessories etc as required
615	Supply ofRecessed Mounted 2\"X2\" Panel LEDcomprising of 40W LEDwith non integral / integral driver, 6500K color temp having 40000 burning hrs life with minimum@ L 70, system lumen output should be minimum with efficacy > 100 lm/W. LED driverPF 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08/ IS16106 from NABL approved lab. Manufacturer mandatory i/cconnection wire, testing etc. to complete the job.
616	SITC of 20W surface/wall mounted LED Linear Batten light fixture (4 feet). The luminaire shall have High Optically Efficient Polycarbonate Diffuser for Uniform illumination and wider light distribution. Screwless Design ensures ease of maintenance. The LED shall be compliant with LM80-08, diffuser, driver and all other accessories with complete with all other accessories etc as required
617	SITC of 40W surface/wall mounted LED Linear Batten light fixture (4 feet). The luminaire shall have High Optically Efficient Polycarbonate Diffuser for Uniform illumination and wider light distribution. Screwless Design ensures ease of maintenance. The LED shall be compliant with LM80-08, diffuser, driver and all other accessories with complete with all other accessories etc as required
618	S/F of 12watt designed Surface mounted LED down light
619	S/F of Ultra modern surface mounted Decorative oval Bulk head edge LED Luminaire complete with 10watt LED lamp.
620	S/F of15wt LED ceilling down light complete with lamp
621	S/F of 36wt LED ceilling down lightof size (2x2 )ft including driver or driverless complete with all accessories
622	S/F of energy saving die-cast aluminium 100 watt LED Floodlights complete with lall architectural features
623	S/F of90wt LEDStreet light fittings complete with lamp
624	Supply and Fixing of GI bend pipe for street lightincluding all accessories i.e clamp or jam lock etc
625	S/F of 300mm Exhaust Fan of model Usha
626	S/F of 300mmHeavy dutyExhaust Fan
627	S/F of 18/20watt Suspended Architectural LED Luminaire with Glass free symmetrical illumination complete with all accessories.
628	S/F of60wt LED Street light
629	S/F of12wt LED ceilling down light complete with lamp
630	S/F of 15watt Surface mounted LED down light complete
631	S/f of 50watt LED Flood light
632	S/f of 70watt LED Flood light
633	S/f of 18watt LED Tube light
634	SITC of 20W Suspended mounted LED Linear Batten light fixture. The luminaire shall have High Optically Efficient Polycarbonate Diffuser for Uniform illumination and wider light distribution. Screwless Design ensures ease of maintenance. The LED shall be compliant with LM80-08, diffuser, driver and all other accessories with complete with all other accessories, Suspension kit etc as required
635	SITC of 12W Circular Surface Mounted LED down light fixture. High efficient surface mounted LED round downlighter with white powder coated, pressure die cast aluminium housing. High transmittivitywith premium diffuser to ensure glare free & even light distributioncomplete with all other accessories etc as required.
636	SITC of 18W Circular Surface Mounted LED down light fixture. High efficient surface mounted LED round downlighter with white powder coated, pressure die cast aluminium housing. High transmittivity PS diffuser, driver and all other accessories with complete with all other accessories etc as required.
637	SITC of30watt industrial LED battens to replace traditional T8 battens (600 mm &1200 mm) with industrial grade heavy duty driver having THD<10%. suitable forfor lighting largeareas such as corridors, warehouses & general purpose spaces complete with all other accessories etc as required.
638	Supply ofWall mounted 9W LED Bulk head light fixture, LED of 1 to 3 W each assembled on single MCPCB, havingcolor temp 6500K &having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy>80lm/W. LED driver PF 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Housing made of CRCA powder coated frame with glare free diffused polycarbonate cover.Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory. i/c connection wire, testing etc. to complete the job.
639	Supplying,of 1200 mm sweep white/milky colour ceiling fan 5 star ratedincluding wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge .(With fan Regulator)
640	S/F of 300mm wall fan as per direction of engineer in charge
641	S/Fof step type electronic fan regulator
642	S/F of1200mm Ac ceilling Fan
643	S/F of Modular Angle Holder.
644	S/F of 10watt LED Bulb
645	Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
646	Installation, testing and commissioning of Recessed Down Light/SurfaceDown Light /wall Mounted LED fittings of all sizes upto 25W LED, complete with all accessories including connections etc. as required.
647	Installation, testing and commissioning of Recessed Down Light/SurfaceDown Light fittings of all sizes above25W and Upto 40W LED, complete with all accessories including connections etc. as required.
648	Installation, testing and commissioning of pre-wired, LED Tube Light fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
649	EARTHING
650	S/IT/C of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ terminationofG.I. flat / wire withG. I. nutbolts& washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge. Replacement warranty will be 5 years
651	S/F of Standard Earthing with G.I. earth pipe of 3mtr.Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.
652	Earthing with GI earth plate 600mm x 600mm x 6.0mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal and salt) complete as required.
653	S/F of Special Earthing complete with provision of 600x600x3.15mm thick copper plate along with 25x5mm copper strip in 40mm dia GI pipeincluding soldering of strip if necessary and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.
654	S/F of extra long No.8 G.I.wire for running of earth from Gr. Floor to 1st Floor Main Switch.
655	Earthing with copper earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
656	Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
657	Supplying and laying 6 SWG G.I. wire tie with cable as required.
658	Supplying and laying Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
659	Supplying and laying Providing and fixing 50 mm X 6 mm G.I. strip on surface or in recess for connections etc. as required.
660	Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 Set of G.I. nut bolt & spring washer spaced at 50mm)
661	Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
662	1C x 25 Sq.mm Cu. Flexible Cable (For UPS & Radiology Medical Unit\"s)
663	f.LIGHTENING ARRESTER
664	Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required
665	Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required.(For horizontal run)
666	Provision of lightning arrester with 85mm dia 3mm thick copper base pate and copper tape 20x3mmthick including all accessories
667	Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. (For vertical run)
668	Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 Nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
669	Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.
670	CABLE TRAY,RACE WAY
671	HOT DEEP GI CABLE TRAYS, RACEWAY & JUNCTION BOXES:Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
672	100 mm width X 50 mm depth X 1.6 mm thickness
673	150 mm width X 50 mm depth X 1.6 mm thickness
674	300 mm width X 50 mm depth X 1.6 mm thickness
675	450 mm width X 50 mm depth X 2.0 mm thickness
676	600 mm width X 62.5 mm depth X 2.0 mm thickness
677	750 mm width X 62.5 mm depth X 2.0 mm thickness
678	1000 mm width X 62.5 mm depth X 2.0 mm thickness
679	Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “bends” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
680	100 mm width x 50mm depth x 1.6 mm thickness.
681	150 mm width x 50mm depth x 1.6 mm thickness.
682	300 mm width x 50mm depth x 1.6 mm thickness.
683	450 mm width x 50mm depth x 2 mm thickness.
684	600 mm width x 75mm depth x 2 mm thickness.
685	750 mm width x 75mm depth x 2 mm thickness.
686	900 mm width x 75mm depth x 2 mm thickness.
687	Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Tee” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
688	100 mm width x 50mm depth x 1.6 mm thickness.
689	150 mm width x 50mm depth x 1.6 mm thickness.
690	300 mm width x 50mm depth x 1.6 mm thickness.
691	450 mm width x 50mm depth x 2 mm thickness.
692	600 mm width x 75mm depth x 2 mm thickness.
693	750 mm width x 75mm depth x 2 mm thickness.
694	900 mm width x 75mm depth x 2 mm thickness.
695	Supply and installing ofsingle run 275mm width x 50mm depth x 2mm thickness perforated prepainted MS cable trays with perforation not morethan 17.5% in convenient sections ,joined with connectors suspended from the ceiling with M.S suspenders including bolts& nuts,painting suspenders etc as required as in direction of engineer in charge
696	Supplying and installing following size ofHot Dipped Galvanised Iron Raceways with cover (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
697	100 mm width X 40 mm depth X 1.6 mm thickness GI Raceways
698	150 mm width X 40 mm depth X 1.6 mm thickness Raceways
699	300 mm width X 40 mm depth X 1.6 mm thickness Raceways
700	200 mm width X 40 mm depth & 100mm x 40mm depth Floor race ways
701	Providing and fixing of 150 x 150 x 50 mm deep (Nominal size) wall junction box including providing 2 mm thick Hot deep - galvanizedGI steel cover required as per specification.
702	Providing and fixing of 250 x 250 x 50 mm deep (Nominal size) wall junction box including providing 2 mm thick Hot deep - galvanizedGI steel cover required as per specification.
703	Providing and fixing of 350 x 350 x 50 mm deep (Nominal size) wall junction box including providing 2 mm thick Hot deep - galvanizedGI steel cover required as per specification.
704	Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.
705	BUSDUCT
706	1000A 415V 50kA 3P,4W 100% N IP55 Aluminium Conductor Sandwich Busduct-indoor,0.8KA current density of ABB/C& S/LEGRAND/L&T MAKE,Metal Plugin Tapoff Box with MCCB Provision Straight Feeder with Plugin , 90 degree Bend Nos RO, Flange End ,End Cover Nos , Bracket SupportSpring SupportCopper Flexibles/termination Links External Earth-AL Strip 50x6 -2run.( PCC Panel to 355 kVAR APFCR-1,2&3)
707	INSTALLATION OF ABOVE Complete with all accessories as per direction of Engineer in charge
708	Supply insatllation testing and commissioning of 1.1 kV grade, 1250A, 3 Phase, 4 Wire, 433V, 50Hz, 4P, 50kA/1sec, IP 55, Aluminium Conductor Sandwich Busduct-indoor all Elbow connections should be WELD free and aluminium Sandwitch type busduct with 50X10 Extrenal copper Earthing Outdoor Type, with neutral of 100% of phase conductor rating, The accessories indicated below are tentative however contractor to access actual as per the drawing shared. Busduct shall be complete with all accessories for connectivity between DG SYNCHRONIZING PANEL to PCC Panel.
709	INSTALLATION OF ABOVE Complete with all accessories as per direction of Engineer in charge
710	Supply insatllation testing and commissioning of 1.1 kV grade, 1600A, 3 Phase, 4 Wire, 433V, 50Hz, 4P, 80kA/1sec, IP 55, Aluminium Conductor Sandwich Busduct Outdoor(with canopy) all Elbow connections should be WELD free and aluminium Sandwitch type busduct with 50X10 Extrenal copper Earthing Outdoor Type, with neutral of 100% of phase conductor rating, The accessories indicated below are tentative however contractor to access actual as per the drawing shared. Busduct shall be complete with all accessories for connectivity between (from Transformer to LT KIOSK Panel)
711	INSTALLATION OF ABOVE Complete with all accessories as per dierction of E.I.C
712	DISTRIBUTION BOARDS
713	Supply, erection, testing and Commissioning of Distribution Boards of sheetmetal construction with cutouts for operating the MCB knobs in the inner coverexterior powder coated metal frame with door and comprising of phase copperbus bars, neutral and earth bar with tapped holes, bakelite phase barriers, PVCinsulator shoes for incoming wires, necessary cable boxes for incoming /outgoing conduits. DB\"s shall be suitable for single phase/3 phase operation.DB\"s shall be flush mounted to brick wall / surface mounted and shall be of Double door type, raceway to be consider for DB\"s and withnecessary fixing accessories, DBS shall be as per Technical specifications.Normal Lighting and Power - C Curve, UPS/Emergency - D Curve MCB\"s DB ,MCB,RCCB & All protective devices are of Make L&T/Hager/Legrand/Schneider/ eq approved make as per direction of Engineer in charge. replacement warranty period shall be 5 years
714	8 WAY TPN DB - LDB incoming: 32A FP 10KA-1nos,MCB,Sub-incomer: 32 DP,RCCB,30mA-3nos,Outgoing: 6-10A SPMCB-18nos
715	6 WAY TPN DB - LDB SECURITY LDB 2NOS incoming: 25A FP 10KA-1nos,MCB,Sub-incomer: 25 DP,RCCB,30mA-3nos,Outgoing: 6-10A SPMCB-12nos
716	12 WAY TPN DB - LDBincoming: 63A FP 10KA-1nos,MCB,Sub-incomer: 40A DP,RCCB,30mA-3nos,Outgoing: 6-10A SPMCB-30nos
717	8 WAY TPN DB - PDB& SECURITY PDBincoming: 40A FP 10KA-1nos,MCB,Sub-incomer: 40ADP,RCCB,100mA-3nos,Outgoing: 16-20A SPMCB-18nos
718	6WAY TPN DB - PDB incoming: 32A FP 10KA-1nos,MCB,Sub-incomer: 32ADP,RCCB,100mA-3nos,Outgoing: 16A SPMCB-12nos
719	12 WAY TPN DB - PDB incoming: 63A FP 10KA-1nos,MCB,Sub-incomer: 63ADP,RCCB,100mA-3nos,Outgoing: 16A MCB-30nos
720	6 WAY TPN DB - ELDB incoming: 25A FP 10KA-1nos,MCB,Sub-incomer: 25 DP,RCCB,30mA-3nos,Outgoing: 6-10A MCB-12nos
721	8 WAY TPN DB - ELDB incoming: 32A FP 10KA-1nos,MCB,Sub-incomer: 32 DP,RCCB,30mA-3nos,Outgoing: 6-10A MCB-18nos
722	6 WAY TPN DB -UPSDBsecurity incoming: 32A FP 10KA-1nos,MCB,Sub-incomer: 32A DP,MCCB,-3nos,Outgoing:16A SPMCB-12nos
723	8 WAY TPN DB -UPSDB incoming: 40A FP 10KA-1nos,MCB,Sub-incomer: 40A DP,MCB,-3nos,Outgoing:16A SPMCB-18nos
724	8 WAY TPN DB -UPSDB HUB ROOM DB incoming: 63A FP 10KA-1nos,MCB,Sub-incomer:63A DP,MCB,-3nos,Outgoing:32A DP MCB-9nos
725	12 WAY TPN DB -UPSDB incoming: 63A FP 10KA-1nos,MCB,Sub-incomer: 63A DP,MCB,-3nos,Outgoing:16A SPMCB-30nos
726	S/F. of 12 Way double door D.Box with 1x 32Amp DP of \"C\" series + 10 x(16 -10)A.SP MCB\"B\" as per direction of engineer in charge( DB & MCB of make Schnider/Hager/Legrand/L&T/eq make)
727	S/F of (4+12) way double door TPN distribution Boxfor single phase out goingincoming- 63Amp TPN MCB of havells make, outgoing- 12 x (6-32)A SP MCBas per direction of engineer in charge( DB & MCB of make Schnider/Hager/Legrand/L&T/eq make) Light Load
728	S/F of (4+18) way double door TPN distribution Boxfor single phase out goingincoming- 63Amp TPN MCB of havells make, outgoing- 40A DP MCB x 9nosas per direction of engineer in charge( DB & MCB of make Schnider/Hager/Legrand/L&T/eq make)
729	CABLE
730	Supply of XLPE insulated and PVC sheathed Aluminium conductor armoured cable of 1.1 KV grade confirming to IS : 7098:1988 with upto date amendments of following sizes.Make-Phinolex/KEI/RR Cable/Eq approved make as per direction of Engineer-in-charge.
731	3.5core, 400 Sq.mm.
732	3.5core, 300 Sq.mm.
733	3.5core, 240 Sq.mm.
734	3.5 core, 185 Sq.mm.
735	3.5 core, 150 Sq.mm.
736	3.5 core, 120 Sq.mm.
737	3.5 core, 95 Sq.mm.
738	3.5 core, 70 Sq.mm.
739	3.5 core, 50 Sq.mm.
740	3.5 core, 35 Sq.mm.
741	3.5 core, 25 Sq.mm.
742	4 core, 16 Sq.mm.
743	4 core, 10 Sq.mm.
744	4 core, 6 Sq.mm.
745	4 core, 4 Sq.mm.
746	3 core 16sqmm
747	2 core 6sqmm
748	Supply of XLPE insulated and PVC sheathed copper conductor armoured cable of 1.1 KV grade confirming to IS : 7098:1988 with upto date amendments of following sizes.
749	4 core, 6 Sq.mm.
750	4 core, 4Sq.mm.
751	4 core, 25 Sq.mm.
752	4 core, 16 Sq.mm.
753	Supply of XLPE insulated and PVC sheathed copper conductor Unarmoured cable of 1.1 KV grade confirming to IS : 7098:1988 with upto date amendments of following sizes
754	1 core, 185 Sq.mm
755	1 core, 150 Sq.mm
756	1 core, 35 Sq.mm
757	Supply of PVC insulated and PVC sheathed copper conductor armoured Stranded Control cable of 1.1 KV grade confirming to IS : 7098:1988 with upto date amendments of following sizes
758	4 core, 2.5 Sq.mm
759	7 core, 2.5 Sq.mm
760	12core 2.5sqmm
761	19/24 core 2.5sqmm
762	Laying of one number XLPE power cable of1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
763	Above 120sqmm and upto400 Sq.mm.
764	Layingof Cable in Trenching in all type of soil with excavation of earth, Tile cutting with sand cushing and brick laying etc.& filling of loose soil upto ground level.
765	Laying of cable on wall surface by clamping.
766	1.1 kV L.T Cable Laying of one number armoured XLPE insulated and PVC sheathed control cable 1.1 kV of following size in the existing cable Trays/ Surface including providing suitable size clamp to secure the cable in tray/ surface as required.
767	Above 35 sq. mm and upto 95 sq. mm in ground
768	Laying of Above 95 sq. mm and upto 185 sq. mm XLPE power cable of 1.1 kV grade direct in ground
769	Laying of Above 185 sq. mm and upto 400 sq. mm XLPE power cable of 1.1 kV grade direct in ground
770	Laying and fixing offollowing sizes of one number PVC insulated and PVC sheathed/XLPE Power cable of 1.1kv gradeoncable tray asrequired.
771	Upto 35 sq. mm (clamped with 1mm thick saddle)
772	Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mmMS flat clamp)
773	Laying of MV XLPE Cable 95 sq. mmto 185 sq. mm on cable tray
774	Laying of MV XLPE Cable 185 sq. mmto 400 sq. mm on cable tray
775	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
776	3.5core, 300 Sq.mm.
777	3.5core, 240 Sq.mm.
778	3.5 core, 185 Sq.mm.
779	3.5 core, 150 Sq.mm.
780	3.5 core, 120 Sq.mm.
781	3.5 core, 95 Sq.mm.
782	3.5 core, 70 Sq.mm.
783	3.5 core, 50 Sq.mm.
784	3.5 core, 35 Sq.mm.
785	3.5 core, 25 Sq.mm.
786	4 core, 16 Sq.mm.
787	4 core, 10 Sq.mm.
788	Supplying and making end termination with brass compression gland and Cu lugs for following size of PVC insulated and PVC sheathed / XLPECu conductor cable of 1.1 KV grade as required.
789	4 core, 6 Sq.mm.
790	4 core, 4Sq.mm.
791	3 core, 6 Sq.mm.
792	4 core, 25 Sq.mm.
793	4 core, 16 Sq.mm.
794	3core, 10Sq.mm.
795	1 core, 185 Sq.mm
796	1 core, 150 Sq.mm
797	1 core, 35 Sq.mm
798	Supplying and making end termination with brass compression gland and Cu lugs for following size of PVC insulated and PVC sheathed / XLPE Cu conductor cable of 1.1 KV grade as required.
799	4 core, 2.5 Sq.mm
800	7 core, 2.5 Sq.mm
801	12core 2.5sqmm
802	19/24 core 2.5sqmm
803	RCC HUME PIPES
804	Supplying and laying NP2 class RCC Hume pipe / GI medium class embedded in wall / floor / below ground level.The rate shall include excavation, laying of pipe, refilling, consolidating, making the chase in the brick wall, embedding the pipes and redoing the surface.Any specials like nipples, collars shall also be included in this item rate only.
805	300 mm dia.(For HT, LT & Communication Cables)
806	150 mm dia. (External and Landscape Light)
807	100 mm dia. (External and Landscape Light)
808	80 mm dia. GI pipe (External and Landscape Light)
809	50 mm dia.GI pipe (External and Landscape Light)
810	PANEL BOARDS
811	PCC PANEL shall be as per Single line diagram and technical specifications. (Indoor - IP 42)NOTE : Wherever the PLC is applicable, the vendor / contractor has to make sure that panel is delivered along with the PLC. No additional cost will be entertained after the delivery of panels.Gas purging system (PANEL PROTECTION SYSTEM) MUST BE DONE AS PER PROPER GUIDELINES.Supply, fixing, testing and commissioning of automatic Linear pneumatic Tube Detection based Novec 1230/FK-5-1-12 (as per NFPA 2001 edition 2018) System for Electrical Panels (Linear Pnuematic Heat Detection Tube Panel Protection System), consisting of the Mentioned components 2kg capacity Novec 1230/ FK-5-1-12 (as per NFPA 2001 edition 2018) , DLP Assembly with automatic valve, push in connector for tube, Novec 1230/FK-5-1-12 (as per NFPA 2001 edition 2018) , mounting bracket, End of Line adopter and low pressure switch for Linear pneumatic heat Detection Tube with all necessary fittings & supports.Audio visual Alarmconsisting of the Mentioned componentsFabrication of Panel board including above specifications INCOMING;- 1600A 50KA FP EDO ACB MP -3NOS,1250A 50KA FP EDO ACB MP-3NOS, Ics=100% of Icu1600A BUSBAR- 3NOS,1600ABUS COUPLER-2NOS OUT GOING:- 1000A 50KA TPN MDO ACB MP-4NOS,800A 50KA TPN MCCB MP-11 NOS, 630A TPN 50KA MCCB MP-2NOS,400A TPN 50KA MCCB MP-1NOS,1600A 50KA TPN MDO ACB MP-1 NOS ( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make)
812	DG SYNCHRONIZING PANEL
813	DG SYNCHRONIZING PANEL shall be as per Single line diagram and technical specifications. (Indoor - IP 42)NOTE : Wherever the PLC is applicable, the vendor / contractor has to make sure that panel is delivered along with the PLC. No additional cost will be entertained after the delivery of panels.Gas purging system (PANEL PROTECTION SYSTEM)Supply, fixing, testing and commissioning of automatic Linear pneumatic Tube Detection based Novec 1230/FK-5-1-12 (as per NFPA 2001 edition 2018) System for Electrical Panels (Linear Pnuematic Heat Detection Tube Panel Protection System), consisting of the Mentioned components 2kg capacity Novec 1230/ FK-5-1-12 (as per NFPA 2001 edition 2018) , DLP Assembly with automatic valve, push in connector for tube, Novec 1230/FK-5-1-12 (as per NFPA 2001 edition 2018) , mounting bracket, End of Line adopter and low pressure switch for Linear pneumatic heat Detection Tube with all necessary fittings & supports.Audio visual Alarmconsisting of the Mentioned componentsFabrication of Panel board including above specifications INCOMING;- 1600A 50 KA TPN EDO ACB MP-2NOS,2500A 50KA TPN EDO ACB MP-1NOS, 3200A BUSBAR UNIT-1NOS, 3200A 50KA EDO ACB-COUPLER, OUTGOING;-1250A 50KA TPN MDO ACB MP-5NOS,800A 50KA TPN MCCB MP-4NOS,630A 50KA TPN MCCB MP-1NOS,400A 50KA FP MCCB MP-1NOS,
814	355 kVAR APFCR PANEL
815	355 kVAR APFCR PANEL shall be as per Single line diagram and technical specifications. (Indoor - IP 42).Gas purging system (PANEL PROTECTION SYSTEM) MUST BE DONE AS PER PROPER GUIDELINES.Supply, fixing, testing and commissioning of automatic Linear pneumatic Tube Detection based Novec 1230/FK-5-1-12 (as per NFPA 2001 edition 2018) System for Electrical Panels (Linear Pnuematic Heat Detection Tube Panel Protection System), consisting of the Mentioned components 2kg capacity Novec 1230/ FK-5-1-12 (as per NFPA 2001 edition 2018) , DLP Assembly with automatic valve, push in connector for tube, Novec 1230/FK-5-1-12 (as per NFPA 2001 edition 2018) , mounting bracket, End of Line adopter and low pressure switch for Linear pneumatic heat Detection Tube with all necessary fittings & supports.Audio visual Alarmconsisting of the Mentioned componentsFabrication of Panel board including above specificationsIncoming: 1000A,50KA TPN MDO ACB Microprocessor based -1Nos,1000A Cu Busbar Unit Outgoing:- 250A,TPN MCCB - 1NOS, 125A TPN MCCB-3NOS, 63A TPN MCCBN-2NOS,40A TPN MCCB-2NOS,32A TPN MCCB-1NOS,16A TPN MCCB-3NOS( Switchgear items are of make L&T/Hager/Legrand/Schneider/eq make)
816	UTILITY PANEL-1
817	UTILITY PANEL-1 shall be as per Single line diagram and technical specifications. (Indoor - IP 42).Gas purging system (PANEL PROTECTION SYSTEM) MUST BE DONE AS PER PROPER GUIDELINES.Supply, fixing, testing and commissioning of automatic Linear pneumatic Tube Detection based Novec 1230/FK-5-1-12 (as per NFPA 2001 edition 2018) System for Electrical Panels (Linear Pnuematic Heat Detection Tube Panel Protection System), 2kg capacity Novec 1230/ FK-5-1-12 (as per NFPA 2001 edition 2018) , DLP Assembly with automatic valve, push in connector for tube, Novec 1230/FK-5-1-12 (as per NFPA 2001 edition 2018) , mounting bracket, End of Line adopter and low pressure switch for Linear pneumatic heat Detection Tube with all necessary fittings & supports.Audio visual Alarmconsisting of the Mentioned componentsFabrication of Panel board including above specificationsIncoming: 800A,36KA FP Microprocessor based MCCB-2Nos,800A Cu Busbar Unit Outgoing:- 400A,36KA Microprocessor based TPN MCCB-2Nos, 200A ,36KA THbased TPN MCCB-2Nos,250A ,36KA Microprocessor based TPN MCCB-1Nos,100A ,36KA TH based TPN MCCB-2Nos,63A ,36KA TH based TPN MCCB-2Nos,315A 36KA Microprocessor based TPN MCCB-1Nos,( Switchgear items are of make L&T/Hager/Legrand/Schneider/ eq make as per direction of Engg-in-charge).
818	UTILITY PANEL-2
819	UTILITY PANEL-2 shall be as per Single line diagram and technical specifications. (Indoor - IP 42).Gas purging system (PANEL PROTECTION SYSTEM) MUST BE DONE AS PER PROPER GUIDELINES.Supply, fixing, testing and commissioning of automatic Linear pneumatic Tube Detection based Novec 1230/FK-5-1-12 (as per NFPA 2001 edition 2018) System for Electrical Panels (Linear Pnuematic Heat Detection Tube Panel Protection System), consisting of the Mentioned components 2kg capacity Novec 1230/ FK-5-1-12 (as per NFPA 2001 edition 2018) , DLP Assembly with automatic valve, push in connector for tube, Novec 1230/FK-5-1-12 (as per NFPA 2001 edition 2018) , mounting bracket, End of Line adopter and low pressure switch for Linear pneumatic heat Detection Tube with all necessary fittings & supports.Audio visual AlarmIncoming: 800A,36KA FP Microprocessor based MCCB-2Nos,800A Cu Busbar Unit Outgoing:- 630A,36KA Microprocessor based TPN MCCB-2Nos, 400A ,36KA Microprocessorbased TPN MCCB-1Nos,200A ,36KA THbased TPN MCCB-1Nos,100A ,36KA TH based TPN MCCB-1Nos,63A ,36KA TH based TPN MCCB-2Nos,63A 25 KA TH based TPN MCCB-2Nos,( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engg-in-charge)
820	UPS I/P PANEL
821	UPS I/P PANEL shall be as per Single line diagram and technical specifications. (Indoor - IP 42).Gas purging system (PANEL PROTECTION SYSTEM) MUST BE DONE AS PER PROPER GUIDELINES.Supply, fixing, testing and commissioning of automatic Linear pneumatic Tube Detection based Novec 1230/FK-5-1-12 (as per NFPA 2001 edition 2018) System for Electrical Panels (Linear Pnuematic Heat Detection Tube Panel Protection System), consisting of the Mentioned components 2kg capacity Novec 1230/ FK-5-1-12 (as per NFPA 2001 edition 2018) , DLP Assembly with automatic valve, push in connector for tube, Novec 1230/FK-5-1-12 (as per NFPA 2001 edition 2018) , mounting bracket, End of Line adopter and low pressure switch for Linear pneumatic heat Detection Tube with all necessary fittings & supports. Audio visual AlarmIncoming: 800A,36KA FP Microprocessor based MCCB-2Nos,800A Cu Busbar Unit Outgoing:- 400A,36KA Microprocessor based TPN MCCB-3Nos, 315A ,36KA Microprocessorbased TPN MCCB-1Nos,200A ,25KA THbased TPN MCCB-1Nos,125A ,36KA THbased TPN MCCB-1Nos,( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
822	UPS O/P PANEL
823	UPS O/P PANEL shall be as per Single line diagram and technical specifications. (Indoor - IP 42).Gas purging system (PANEL PROTECTION SYSTEM) MUST BE DONE AS PER PROPER GUIDELINES.Supply, fixing, testing and commissioning of automatic Linear pneumatic Tube Detection based Novec 1230/FK-5-1-12 (as per NFPA 2001 edition 2018) System for Electrical Panels (Linear Pnuematic Heat Detection Tube Panel Protection System), consisting of the Mentioned components 2kg capacity Novec 1230/ FK-5-1-12 (as per NFPA 2001 edition 2018) , DLP Assembly with automatic valve, push in connector for tube, Novec 1230/FK-5-1-12 (as per NFPA 2001 edition 2018) , mounting bracket, End of Line adopter and low pressure switch for Linear pneumatic heat Detection Tube with all necessary fittings & supports. Audio visual AlarmIncoming:400A,25KA TPN Microprocessor based MCCB-2Nos,315A,25KA TPN Microprocessor based MCCB-1Nos,800A Cu Busbar Unit Outgoing:- 400A,25KA Microprocessor based FP MCCB-5Nos, 250A ,25KA THbased FP MCCB-1Nos,200A ,25KA THbased FP MCCB-2Nos,125A ,25KA TH based FP MCCB-1Nos,( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
824	MAIN LIGHTING & RAW POWER PANEL-GF
825	MAIN LIGHTING & RAW POWER PANEL-GF shall be as per Single line diagram and technical specifications. (Indoor - IP 42) Incoming:800A,36KA FP Microprocessor based MCCB-1Nos,,800A Cu Busbar Unit Outgoing:- 400A,36KA Microprocessor based TPN MCCB-2Nos, 250A ,36KA microprocessorbased TPN MCCB-1Nos,315A ,36KA Microprocessorbased TPNMCCB-1Nos,200A ,36KA TH based TPN MCCB-1Nos,( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
826	FLOOR LIGHTING & RAW POWER PANEL-GF
827	FLOOR LIGHTING & RAW POWER PANEL-GF shall be as per Single line diagram and technical specifications. (Indoor - IP 42 ) Incoming:250A,36KA FP Microprocessor based MCCB-1Nos,,250A Cu Busbar Unit Outgoing:- 63,10KATPN MCB-12Nos,40A,10KATPN MCB-7Nos,32A,10KATPN MCB-13 Nos, 25A,10KATPN MCB-5Nos( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
828	FLOOR LIGHTING & RAW POWER PANEL-1F
829	FLOOR LIGHTING & RAW POWER PANEL-1F shall be as per Single line diagram and technical specifications. (Indoor - IP 42) Incoming:400A,36KA FP Microprocessor based MCCB-1Nos,,400A Cu Busbar Unit Outgoing:- 63,10KATPN MCB-12Nos,40A,10KATPN MCB-7Nos,32A,10KATPN MCB-13 Nos, 25A,10KATPN MCB-6Nos( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
830	FLOOR LIGHTING & RAW POWER PANEL-2F
831	FLOOR LIGHTING & RAW POWER PANEL-2F shall be as per Single line diagram and technical specifications. (Indoor - IP 42) Incoming:315A,36KA FP Microprocessor based MCCB-1Nos,,315A Cu Busbar Unit Outgoing:- 63A,10KATPN MCB-11Nos,40A,10KATPN MCB-6Nos,32A,10KATPN MCB-13 Nos, 25A,10KATPN MCB-6Nos( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
832	MAIN LIGHTING & RAW POWER PANEL-3F
833	MAIN LIGHTING & RAW POWER PANEL-3F shall be as per Single line diagram and technical specifications. (Indoor - IP 42) Incoming:800A,25KA FP Microprocessor based MCCB-1Nos,,800A Cu Busbar Unit Outgoing:-400A,25KAMPbased TPN MCCB-3Nos,315A,25KAMP based TPN MCCB-1Nos-,200A,25KATHbased TPN MCCB-1Nos,,( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
834	FLOOR LIGHTING & RAW POWER PANEL-3F
835	FLOOR LIGHTING & RAW POWER PANEL-3F shall be as per Single line diagram and technical specifications. (Indoor - IP 42) Incoming:400A,25KA FP Microprocessor based MCCB-1Nos,,400A Cu Busbar Unit Outgoing:- 32A TPN 10KA MCB-13NOS, 25A TPN 10KA MCB-8NOS , 40A TPN 10KA MCB-7NOS, 63A TPN 10KA MCB-8NOS( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
836	FLOOR LIGHTING & RAW POWER PANEL-4F&5F
837	FLOOR LIGHTING & RAW POWER PANEL-4F&5F shall be as per Single line diagram and technical specifications. (Indoor - IP 42) Incoming:400A,25KA FP Microprocessor based MCCB-1Nos,,400A Cu Busbar Unit Outgoing:- 32A TPN 10KA MCB-12NOS, 25A TPN 10KA MCB-6NOS , 40A TPN 10KA MCB-6NOS, 63A TPN 10KA MCB-7NOS, 16A TPN 10KA MCB-1NOS, 100A TPN 25KA TH MCCB-1NOS( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
838	MEDICAL RP PANEL-3F
839	MEDICAL RP PANEL-3F shall be as per Single line diagram and technical specifications. (Indoor - IP 42) Incoming:315A,25KA FP MPbased MCCB-1Nos,,315A Cu Busbar Unit Outgoing:-125A TH BASED 25KA TPN MCCB-4NOS, , 63A TH BASED 25KA TPN MCCB-4NOS,( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
840	LIFT MAIN PANEL-5F
841	LIFT MAIN PANEL-5F shall be as per Single line diagram and technical specifications. (Indoor - IP 42)Incoming:400A,36KA TPN Microprocessor based MCCB-1Nos,,400A Cu Busbar Unit Outgoing:- 80A,16KATPN TH based MCCB-17Nos( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
842	LIFT DB(TYP) - 15 NOS. @LMR
843	LIFT DB (TYP) shall be as per Single line diagram and technical specifications (Indoor - IP 42) Incoming:80A,16KA TPN TH based MCCB-1Nos,,80A Cu Busbar Unit Outgoing:- 63A,10KAFPMCB-1NOS, 20A DP 10KA MCB 1NOS,16A RCBO DP-3NOS, ( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
844	RADIOLOGY RP PANEL-GF
845	RADIOLOGY RP PANEL-GF shall be as per Single line diagram and technical specifications. (Indoor - IP 42) Incoming:630A,36KA TPN Microprocessor based MCCB-1Nos,Nos,630A Cu Busbar Unit Outgoing:- 400A,25KA Microprocessor based TPN MCCB-2Nos, 250A ,25KA MPbased TPN MCCB-1Nos,125A ,25KA THbased TPN MCCB-5Nos,160A ,25KA TH based TPN MCCB-1Nos,( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
846	OT PANEL (UPS)-3F
847	OT PANEL (UPS)-3F shall be as per Single line diagram and technical specifications. (Indoor - IP 42)Incoming:200A,25KA TPN TH based MCCB-1Nos,,200A Cu Busbar Unit Outgoing:- 63A,10KAFP MCB-1Nos,40A,10KAFP MCB-1Nos,32A,10KAFP MCB-13 Nos, 25A,10KAFP MCB-2Nos( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
848	MAIN EMERGENCY LIGHTING PANEL-GF
849	MAIN EMERGENCY LIGHTING PANEL-GF shall be as per Single line diagram and technical specifications. (Indoor - IP 42) Incoming:200A,25KA TPN TH based MCCB-1Nos,,200A Cu Busbar Unit Outgoing:-63A,25KATH based TPN MCCB-6Nos,100A,25KATH based TPN MCCB-1Nos( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
850	FLOOR EMERGENCY LIGHTING PANEL-GF
851	FLOOR EMERGENCY LIGHTING PANEL-GF shall be as per Single line diagram and technical specifications. (Indoor - IP 42)Incoming:63A,25KA TPN TH based MCCB-1Nos,,63A Cu Busbar Unit Outgoing:- 40A, FP 10KA MCB-2NOS, 63A, FP 10KA MCB-2NOS 25A, FP 10KA MCB-8 NOS, 32A, FP 10KA MCB-2NOS,( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
852	FLOOR EMERGENCY LIGHTING PANEL-1F
853	FLOOR EMERGENCY LIGHTING PANEL-1F shall be as per Single line diagram and technical specifications. (Indoor - IP 42)Incoming:63A,25KA TPN TH based MCCB-1Nos,,63A Cu Busbar Unit Outgoing:- 40A, FP 10KA MCB-2NOS, 63A, FP 10KA MCB-2NOS 25A, FP 10KA MCB-8 NOS, 32A, FP 10KA MCB-2NOS,( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
854	FLOOR EMERGENCY LIGHTING PANEL-2F
855	FLOOR EMERGENCY LIGHTING PANEL-2F shall be as per Single line diagram and technical specifications. (Indoor - IP 42) Incoming:63A,25KA TPN TH based MCCB-1Nos,,63A Cu Busbar Unit Outgoing:- 40A, FP 10KA MCB-2NOS, 63A, FP 10KA MCB-2NOS , 25A, FP 10KA MCB-8 NOS, 32A, FP 10KA MCB-2NOS,( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
856	FLOOR EMERGENCY LIGHTING PANEL-3F
857	FLOOR EMERGENCY LIGHTING PANEL-3F shall be as per Single line diagram and technical specifications. (Indoor - IP 42) Incoming:63A,16KA TPN TH based MCCB-1Nos,,63A Cu Busbar Unit Outgoing:- 40A, FP 10KA MCB-2NOS, 63A, FP 10KA MCB-2NOS , 25A, FP 10KA MCB-8 NOS, 32A, FP 10KA MCB-2NOS,( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
858	FLOOR EMERGENCY LIGHTING PANEL-4F&5F
859	FLOOR EMERGENCY LIGHTING PANEL-4F&5F shall be as per Single line diagram and technical specifications. (Indoor - IP 42) Incoming:63A,16KA TPN TH based MCCB-1Nos,,63A Cu Busbar Unit Outgoing:- 40A, FP 10KA MCB-2NOS, 63A, FP 10KA MCB-2NOS 25A, FP 10KA MCB-8 NOS, 32A, FP 10KA MCB-2NOS,( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
860	MAIN UPS POWER PANEL-GF
861	MAIN UPS POWER PANEL-GF shall be as per Single line diagram and technical specifications. (Indoor - IP 42) Incoming:400A,25KA FP MP based MCCB-1Nos,,400A Cu Busbar Unit Outgoing:-200A TPN 25KA TH MCCB-2NOS, 160A TPN 25 KA TH MCCB-1NOS, 250A TPN 25KA MCCB MP -1NOS, 315A TPN 25KA MCCB MP-1NOS( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
862	FLOOR UPS POWER PANEL-GF
863	FLOOR UPS POWER PANEL-GF shall be as per Single line diagram and technical specifications. (Indoor - IP 42) Incoming:200A,25KA TPN TH based MCCB-1Nos,,200A Cu Busbar Unit Outgoing:- 40A, FP 10KA MCB-10NOS, 63A, FP 10KA MCB-4NOS 25A, FP 10KA MCB-2 NOS, 32A, FP 10KA MCB-2NOS,( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
864	FLOOR UPS POWER PANEL-1F
865	FLOOR UPS POWER PANEL-1F shall be as per Single line diagram and technical specifications. (Indoor - IP 42) Incoming:250A,25KA TPN MP based MCCB-1Nos,,250A Cu Busbar Unit Outgoing:- 40A, FP 10KA MCB-4NOS, 63A, FP 10KA MCB-10NOS 25A, FP 10KA MCB-2 NOS, 32A, FP 10KA MCB-2NOS,( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
866	FLOOR UPS POWER PANEL-2F
867	FLOOR UPS POWER PANEL-2F shall be as per Single line diagram and technical specifications. (Indoor - IP 42) Incoming:160A,25KA TPN TH based MCCB-1Nos,,160A Cu Busbar Unit Outgoing:- 40A, FP 10KA MCB-8NOS, 63A, FP 10KA MCB-6NOS 25A, FP 10KA MCB-2 NOS, 32A, FP 10KA MCB-2NOS,( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
868	MAIN UPS POWER PANEL-3F
869	MAIN UPS POWER PANEL-3F shall be as per Single line diagram and technical specifications. (Indoor - IP 42)Incoming:400A,16KA FP Microprocessor based MCCB-1Nos,,400A Cu Busbar Unit Outgoing:- 315A,16KA Microprocessor based TPN MCCB-2Nos, 250A ,16KA microprocessorbased TPN MCCB-1Nos,160A ,16KA THbased TPNMCCB-1Nos,200A ,16KA TH based TPN MCCB-1Nos,( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
870	FLOOR UPS POWER PANEL-3F
871	FLOOR UPS POWER PANEL-3F shall be as per Single line diagram and technical specifications. (Indoor - IP 42) Incoming:315A,16KA FP MP based MCCB-1Nos,,315A Cu Busbar Unit Outgoing:- 63A,10KAFP MCB-8Nos,40A,10KAFP MCB-6Nos,32A,10KAFP MCB-2 Nos, 25A,10KAFP MCB-2Nos( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
872	FLOOR UPS POWER PANEL-4F&5F
873	FLOOR UPS POWER PANEL-4F&5F shall be as per Single line diagram and technical specifications. (Indoor - IP 42) Incoming:250A,16KA FP MP based MCCB-1Nos,,250A Cu Busbar Unit Outgoing:- 63A,10KAFP MCB-10Nos,40A,10KAFP MCB-4Nos,32A,10KAFP MCB-2 Nos, 25A,10KAFP MCB-2Nos( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
874	MAIN CHILLER PANEL-4F
875	MAIN CHILLER PANEL-4F shall be as per Single line diagram and technical specifications.(Indoor - IP 42) Incoming:800A,25KA FPMicroprocessor based MCCB-1Nos,,800A Cu Busbar Unit Outgoing:- 630A,25KA Microprocessor based TPN MCCB-4Nos, 400A ,25KA MPbased TPN MCCB-1Nos,315A ,25KA MPbased TPN MCCB-2Nos,125A ,25KA TH based TPN MCCB-1Nos,200A ,25KA TH based TPN MCCB-1Nos,160A ,25KA TH based TPN MCCB-1Nos 63A ,25KA TH based TPN MCCB-1Nos( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
876	CHILLER PUMP PANEL
877	CHILLER PUMP PANEL shall be as per Single line diagram and technical specifications.(Indoor - IP 42) Incoming:315A,25KA TPNMicroprocessor based MCCB-1Nos,,315A Cu Busbar Unit Outgoing:-40A MPCB-3Nos, 25A MPCB-4Nos 63A MPCB-4Nos 40A MPCB-1Nos,25A MPCB-1Nos 6A MPCB-1Nos , 250A ,25KA MPbased TPN MCCB-1Nos,200A ,25KA THbased TPN MCCB-1Nos,(63A ,16KA TH based TPN MCCB-1Nos,63Abusbar-1no ,16 A DP 10KA MCB-19nos ,25A DP 10KA MCB-2nos ) ( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
878	VENTILATION PANEL-1
879	VENTILATION PANEL-1 shall be as per Single line diagram and technical specifications.(Outdoor - IP55 with canopy) Incoming: 125A,16KA TPN THbased MCCB-1Nos,Nos,125A Cu Busbar Unit Outgoing:- 16A MPCB-12nos,25A MPCB-3nos,10A MPCB-12nos,6A MPCB-1nos, (Sub panel :-40A TPN 16KA MCCB TH based-1nos,40A Busbar-1nos,25A 10KA DPMCB-1nos,16A 10KA DP MCB-8nos,10A 10KA DP MCB-2nos) 40A 16KA TPN MCB-1no,80A 16KA TPN MCB-2no, 63A 16KA TPN MCB-1no, 63A 16KA TPN TH based MCCB-1no 40A 16KA TPN TH based MCCB-1no ( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
880	VENTILATION PANEL-2
881	VENTILATION PANEL-2 shall be as per Single line diagram and technical specifications. (Outdoor - IP55 with canopy)Incoming: 315A,25KA TPN MPbased MCCB-1Nos,Nos,315A Cu Busbar Unit Outgoing:- 16A MPCB-13nos,40A MPCB-2nos,25A MPCB-9nos,,20A MPCB-6nos,10A MPCB-7nos (Sub panel :-40A TPN 16KA MCCB TH based-1nos,40A Busbar-1nos,25A 10KA DPMCB-1nos,16A 10KA DP MCB-8nos,10A 10KA DP MCB-2nos) 40A 16KA TPN MCB-1no,80A 16KA TPN MCB-2no, 63A 16KA TPN MCB-1no, 63A 16KA TPN TH based MCCB-1no 40A 16KA TPN TH based MCCB-1no ( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
882	HVAC STP PUMP PANEL
883	HVAC STP PUMP PANEL shall be as per Single line diagram and technical specifications. (Indoor - IP 42) Incoming:100A,16KA TPN THbased MCCB-1Nos,Nos,100A Cu Busbar Unit Outgoing:- 16A MPCB-3nos,40A MPCB-3nos,25A MPCB-3nos, (Sub panel :-25A TPN 16KA MCCB TH based-1nos,25A Busbar-1nos,10A 10KA DPMCB-3nos,16A 10KA DP MCB-2nos,) 25A 16KA TPN MCB-1no,32A 16KA TPN MCB-1no 40A 16KA TPN MCB-1no 63A 16KA TPN MCB-1no( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
884	GF-HVAC PANEL
885	GF-HVAC PANEL shall be as per Single line diagram and technical specifications. (Indoor - IP 42 )Incoming:200A,25KA TPN THbased MCCB-1Nos,Nos,200A Cu Busbar Unit Outgoing:- 16A MPCB-11nos,10A MPCB-16nos,20A MPCB-2nos, 16A 10KA TPN MCB-7no,32A 10KA TPN MCB-2no 40A 10KA TPN MCB-3no 63A 10KA TPN MCB-3no 25A 10KA TPN MCB-4no( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
886	3F-HVAC PANEL
887	3F-HVAC PANEL shall be as per Single line diagram and technical specifications. (Indoor - IP 42) Incoming:400A,25KA TPN MP based MCCB-1Nos,Nos,400A Cu Busbar Unit Outgoing:- 16A MPCB-11nos,40A MPCB-2nos,20A MPCB-5nos,25A MPCB-3nos ,20A 10KA TPN MCB-4no,32A 10KA TPN MCB-3no, 40A 10KA TPN MCB-2no, 63A 10KA TPN MCB-1no 25A 10KA TPN MCB-10no, 16A 10KA TPN MCB-13no( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
888	PHE MAIN PANEL
889	PHE MAIN PANEL shall be as per Single line diagram and technical specifications. (Indoor - IP 42) Incoming:400A,25KA TPN MPbased MCCB-1Nos,Nos,400A Cu Busbar Unit Outgoing:- 250A,25 KA Microprocessor based TPN MCCB-1Nos, 100A ,25KA TH TPN MCCB-2Nos,125A ,25KA TH based TPNMCCB-1Nos,63A ,25KA TH based TPN MCCB-1Nos, 63A ,16KA TH based TPN MCCB-1Nos 40A ,16KA TH based TPN MCCB-1Nos
890	PHE PUMP PANEL
891	PHE PUMP PANEL shall be as per Single line diagram and technical specifications. (Indoor - IP 42)Incoming:100A,16KA TPN MPbased MCCB-1Nos,Nos,100A Cu Busbar Unit Outgoing:-(Sub panel :-25A TPN 16KA MCCB TH based-1nos,25A Busbar-1nos,10A 10KA DPMCB-3nos,16A 10KA DP MCB-2nos,) 16A 16KA TPN MCB-13no,32A 16KA TPN MCB-3no63A 16KA TPN MCB-1no, 63A 25KA TH Based MCCB-1nos( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
892	STARTER PANEL-1(OT-1-AHU) - GF
893	STARTER PANEL-1(OT-1-AHU) shall be as per Single line diagram and technical specifications. (Indoor - IP 42) Incoming:25A,10KA TPNMCB-1Nos,Nos,25A Cu Busbar Unit Outgoing:- 16A MPCB-1nos,,20A MPCB-1nos,20A 10KA TPN MCB-1no( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
894	STARTER PANEL-2(OT-2-AHU) - GF
895	STARTER PANEL-2(OT-2-AHU) shall be as per Single line diagram and technical specifications. (Indoor - IP 42)Incoming:25A,10KA TPNMCB-1Nos,Nos,25A Cu Busbar Unit Outgoing:- 16A MPCB-1nos,,20A MPCB-1nos,20A 10KA TPN MCB-1no( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
896	STARTER PANEL-1(OT-1-AHU) - 4F
897	STARTER PANEL-1(OT-1-AHU) shall be as per Single line diagram and technical specifications. (Outdoor - IP55 with canopy) Incoming:32A,10KA TPNMCB-1Nos,Nos,32A Cu Busbar Unit Outgoing:- 16A MPCB-1nos,,25A MPCB-1nos,25A 10KA TPN MCB-1no( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
898	STARTER PANEL-2(OT-2-AHU) - 4F
899	STARTER PANEL-2(OT-2-AHU) shall be as per Single line diagram and technical specifications. (Outdoor - IP55 with canopy) Incoming:25A,10KA TPNMCB-1Nos,Nos,25A Cu Busbar Unit Outgoing:- 16A MPCB-1nos,,20A MPCB-1nos,20A 10KA TPN MCB-1no( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
900	STARTER PANEL-3(OT-3-AHU) - 4F
901	STARTER PANEL-3(OT-3-AHU) shall be as per Single line diagram and technical specifications. (Outdoor - IP55 with canopy) Incoming:25A,10KA TPNMCB-1Nos,Nos,25A Cu Busbar Unit Outgoing:- 16A MPCB-1nos,,20A MPCB-1nos,20A 10KA TPN MCB-1no( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
902	STARTER PANEL-4(OT-4-AHU) - 4F
903	STARTER PANEL-4(OT-4-AHU) shall be as per Single line diagram and technical specifications. (Outdoor - IP55 with canopy) Incoming:25A,10KA TPNMCB-1Nos,Nos,25A Cu Busbar Unit Outgoing:- 16A MPCB-1nos,,20A MPCB-1nos,20A 10KA TPN MCB-1no( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
904	STARTER PANEL-5(OT-5-AHU) - 4F
905	STARTER PANEL-5(OT-5-AHU) shall be as per Single line diagram and technical specifications. (Outdoor - IP55 with canopy) ncoming:25A,10KA TPNMCB-1Nos,Nos,25A Cu Busbar Unit Outgoing:- 16A MPCB-1nos,,20A MPCB-1nos,20A 10KA TPN MCB-1no( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
906	STARTER PANEL-6(OT-6-AHU) - 4F
907	STARTER PANEL-6(OT-6-AHU) shall be as per Single line diagram and technical specifications. (Outdoor - IP55 with canopy) Incoming:25A,10KA TPNMCB-1Nos,Nos,25A Cu Busbar Unit Outgoing:- 16A MPCB-1nos,,20A MPCB-1nos,20A 10KA TPN MCB-1no( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
908	STARTER PANEL-7(OT-7-AHU) - 4F
909	STARTER PANEL-7(OT-7-AHU) shall be as per Single line diagram and technical specifications. (Outdoor - IP55 with canopy) Incoming:25A,10KA TPNMCB-1Nos,Nos,25A Cu Busbar Unit Outgoing:- 16A MPCB-1nos,,20A MPCB-1nos,20A 10KA TPN MCB-1no( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
910	STARTER PANEL-8(OT-8-AHU) - 4F
911	STARTER PANEL-8(OT-8-AHU) shall be as per Single line diagram and technical specifications. (Outdoor - IP55 with canopy) Incoming:25A,10KA TPNMCB-1Nos,Nos,25A Cu Busbar Unit Outgoing:- 16A MPCB-1nos,,20A MPCB-1nos,20A 10KA TPN MCB-1no( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
912	STARTER PANEL-9(OT-9-AHU) - 4F
913	STARTER PANEL-9(OT-9-AHU) shall be as per Single line diagram and technical specifications. (Outdoor - IP55 with canopy) Incoming:25A,10KA TPNMCB-1Nos,Nos,25A Cu Busbar Unit Outgoing:- 16A MPCB-1nos,,20A MPCB-1nos,20A 10KA TPN MCB-1no( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
914	EXTERNAL LIGHTINGPANEL-1Incoming:63A,16KA TPN TH based MCB-1Nos,,63A Cu Busbar Unit Outgoing:- 20A,DP ELCB-3Nos, 40A FP ELCB-1Nos,Contactor 20A DP-3nos, 20A DP MCB -9nos,25A FP MCB-6nos,32A FP ELCB -1nos( Switchgear items are of make L&T/Hager/Legrand/Schneider/Eq make as per direction of Engineer in charge)
915	EXTERNAL LIGHTINGPANEL-2Incoming:63A,16KA TPN TH based MCB-1Nos,,63A Cu Busbar Unit Outgoing:- 20A,DP ELCB-3Nos, 40A FP ELCB-1Nos,Contactor 20A DP-3nos, 20A DP MCB -9nos,25A FP MCB-6nos,32A FP ELCB -1nos( Switchgear items are of make L&T/Hager/Legrand/Schneide/Eq make as per direction of Engineer in charger)
916	Fabrication of 400A Double door panel board of size990mmx1060mmx300mm with powder coat made out of 18 SWG CR sheet provision of Cable Ally with incoming: Adjustble thermal & adjustble magnetic setting with Ics=75% Icu 400Amp 50 .KA 4 pole MCCB of L&T make-1No,600 Amp copper bus bar with 50mmx6mm copper copper flat-1No, Outgoing: , 400Amp on load changeove-1No,Adjustble thermal & Fixed magnetic setting with Ics=100% 125Amp 36KA 4-pole MCCB of L&T make-4 Nos,63AMP MCCB 4-pole 16KA breaking capacity make of seimens/ L&T/Havels/HPL-6Nos,,Volt meter,Ammeter,selector switch,C.P.Coil and Indicator lamp RYB with Toggle switch ,Transporation and fixing charges (MCCB & MCB of L&T/HPL/Havels)/Eq make as per direction of Engineer in charge
917	Fabrication of 250A panel board of size 1200mmx 1260mm x 320mm with powder coat made out of 18 SWG CR sheet with Incoming: 250Amp MCCB four pole 35KA breaking capacity-1No,400A, 25mm x 12mm copper Busbar-1no, Outgoing: 100Amp MCCB four pole 16KA breaking capacity-1No, 63Amp MCCB four pole 16KA breaking capacity-6No,250Amp four pole Onload Change over-1No,Volt meter,Ammeter CT coil,RYB indicator,Transporation and fixing charges etc. (Main Incomer Panel Board) Protecective device(MCCB,Changeover switch) should have make of (L&T/Hager/Schnider/legrand)/Eq make as per direction of Engineer in charge
918	Fabrication of 160A panel board of size870mmx1010mmx320mm with powder coat made out of 18 SWG CR sheet with provn of Incoming160Amp 50KA 4 pole MCCB of Havels makeIHLFHFO160-1No,,200Amp copper Bus bar 25mmx6mm copper flat-1No, 160A4pole onloadchange over of Havels make.1No ,40A DP MCB\"C\"Series-12nos,Volt meter,Ammeter,selector switch,C.P.Coil and Indicator lamp RYB with Toggle switch ,Transporation and fixing charges (MCCB & MCB of L&T/HPL/Havels)/Eq make as per direction of Engineer in charge
919	Fabrication of 63A panel board of size 36\"x36\"x36\" with powder coat made out of 18 SWG CR sheet with Incoming: 63amp MCCB four pole 25KA breaking capacity(FIXED MAGNETIC)-1No, , Outgoing: 100 Amp copper bus bar with 7X20mm2 copper flat .-1no ,63Amp four pole change over-1 No,40Amp DP MCB-5 nos,Volt meter,Ammeter CT coil,RYB indicator,Transporation and fixing charges etc. (MCCB & MCB of L&T/HPL/Schnider,legrand/hager)/Eq make as per direction of Engineer in charge
920	Fabrication of 250A panel board of size 1800mmx 1760mm x 320mm with powder coat made out of 18 SWG CR sheet with Incoming: 250Amp MCCB four pole 25KA breaking capacity-1No,400A, 25mm x 12mm copper Busbar-1no, Outgoing: 100Amp MCCB four pole 25KA breaking capacity-1No, 63Amp MCCB four pole 25KA breaking capacity-12No,250Amp four pole Onload Change over-1No,Volt meter,Ammeter CT coil,RYB indicator,Transporation and fixing charges etc. (Main Incomer Panel Board) Protecective device(MCCB,Changeover switch) should have make of (L&T/Hager/Schnider/legrand)
921	Fabrication of 400A panel board of size 1700mmx 1400mm x 330mm with powder coat made out of 18 SWG CR sheet with Incoming: 400Amp MCCB four pole 50KA breaking capacity-1No,600A, 50mm x 12mm copper Busbar-1no, Outgoing: 250A MCCB four pole 25KA breaking capacity-1No, 100Amp MCCB four pole 25KA breaking capacity-3No,400Amp four pole Onload Change over-1No,Volt meter,Ammeter CT coil,RYB indicator,Transporation and fixing charges etc. (Main Incomer Panel Board) Protecective device(MCCB,Changeover switch) should have make of (L&T/Hager/Schnider/legrand)
922	Supply, Installation, Testing and Commissioning 32A DP MCBisolater housed in Indoor type with IP 55 metal box enclosure.
923	Supply, Installation, Testing and Commissioning of 32A 4P MCCB ISOLATOR housed in metallic Indoor type with IP 55 metal box enclosure.
924	Supply, Installation, Testing and Commissioning of 63A 4P MCCB ISOLATOR housed in metallic Indoor type with IP 55 metal box enclosure.
925	Supply, Installation, Testing and Commissioning of 125A 4P MCCB ISOLATOR housed in metallic Indoor type with IP 55 metal box enclosure.
926	Supply, Installation, Testing and Commissioning of 250A 4P MCCB ISOLATOR housed in metallic Indoor type with IP 55 metal box enclosure.
927	Supply, Installation, Testing and Commissioning of 400A 4P MCCB ISOLATOR housed in metallic Indoor type with IP 55 metal box enclosure.
928	Supply, Installation, Testing and Commissioning of 630A, TPN,25kA, MCCBhoused in metallic enclosure Outdoor type with IP55 with canopy Fabrication Panel enclosure. (For HVAC CHILLER - 250TR)
929	Supply, Installation, Testing and Commissioning of Local push button station.Local push button station comprising of mushroom type OFF push button. Rate shall include cost of Necessary supports for fixing arrangements. (For starters)
930	cost for electrical inspection of DG ,TR & all electrical installations by electrical inspector
931	SOLAR-GRID CONNECTED SYSTEM
932	Supplying installation,testing and commissioning of each kW power with Solar Photovoltaic system including PV Modulesaluminium super structure supported on GI support, string PCUs, Copper maintainace free copper earthing, connection of earthing pit to SPV system including insulated copper strip / cables , associated power and control cabling from SPV panel to power panel and Main distribution panel in each cluster as per specification complete in all respect as per site requirement including cabling upto solar panel. (Inclusive of earthing for DC as well as AC equipment or system)
933	SOLAR WATER HEATING SYSTEM 5000 LTR
934	Supplying,installation,testing and commissioning of 3000 LPD Solar Water Heating System Collector Type COPPER with Chrome Coated Total Space required for the Collector 82.64 M2 with all required accessories as requiredSpecification as attached
935	Inverter & Split AC
936	S/F ofInverter set for each court completewith 2.5KVA,24V UPS( make of Microtake/Luminous)with2nos 200 AH Sine Wave inverter battery ( make Exide/Amaron/Luminous or equivalent)
937	S/F of 850 VA UPS( Microtake/Luminous)with1nos 120 AH Sine Wave inverter battery ( make Exide/Amaron/Luminous or equivalent)
938	S/F ofCopper 3 Star Rated2 Toninverter Split type AC.Machine make of LLoyd/Voltas or Equivalent as per direction of engineer in charge
939	Installation charges of 2 ton AC.machine.
940	S/F of 5KVA Voltage stabiliser having digital display ,intial time delay system i.e certified with ISO 9001:2008 with working range of (90-300)V of make: V.guard/Autotake
941	S/F of Extra long copper pipe for indoor unit to out door unit.( As per Outdoor Unit Location)
942	S/L of 2.5sqmm 3 core cable for connection of indoor unit to out door unit of make Havells/HPL/Anchore/V.Guard.
943	Fixing of drain pipe of all airconditioners through tile cutting as per direction of engineer in charge
944	S/F of AC stand of reputed make
945	S/F of 25A/32Amp AC starterswitch of Havells/legrand /or equivalent make.
946	DG SETS
947	Supply, installation, testing and commissioning of Diesel Generator Set comprising of 1010 kVA prime continuous (actual) rating raditor coolled diesel Engine in acoustic enclosure with rated capacity of suitable BHP at 1500 RPM, direct electronic fuel injection type vertical 4 stroke, 12/16 cylinder, electronic governor, power command control module (PCC-3.3, Cummins or equiv) along with base frame coupled to alternator capable of delivering true 1000 kVA output at 47 Deg temprature (808 KW at 0.8 power factor) brushless type 415V, 50 Hz, self exciting alternator with residential silencer, Lube Oil System, Electronic Governor, Batteries, Battery charger, Instrumentation, 990day oil fuel tanks, Silencer with bellows, alarms, Engine Control Panel, AVM pads, AVR Panel, QDCT for syncronizing,Terminal arrangements including bus duct box with all other associated equipment / work as per specifications.Note: Day oil storage tank fabricated from 4 mm thick MS plate. Tank shall include 450 mm ID manhole cover,level indicator and flanged connection for inlet, outlet,overflow drain and probe provision for level controller.Tank shll be mounted on 2 m hgh structure support with access ladder (painted with 2 coats of red oxide primer).The work should be as per Central Electrical Inspectorate/ Pollution control board standards. (Refer Particular specification)
948	Supply, installation, testing and commissioning of Diesel Generator Set comprising of 1500 kVA prime continuous (actual) rating raditor coolled diesel Engine in acoustic enclosure with rated capacity of suitable BHP at 1500 RPM, direct electronic fuel injection type vertical 4 stroke, 12/16 cylinder, electronic governor, power command control module (PCC-3.3, Cummins or equiv) along with base frame coupled to alternator capable of delivering true 1500 kVA output at 47 Deg temprature (1200 KW at 0.8 power factor) brushless type 415V, 50 Hz, self exciting alternator with residential silencer, Lube Oil System, Electronic Governor, Batteries, Battery charger, Instrumentation, 990day oil fuel tanks, Silencer with bellows, alarms, Engine Control Panel, AVM pads, AVR Panel, QDCT for syncronizing,Terminal arrangements including bus duct box with all other associated equipment / work as per specifications.Note: Day oil storage tank fabricated from 4 mm thick MS plate. Tank shall include 450 mm ID manhole cover,level indicator and flanged connection for inlet, outlet,overflow drain and probe provision for level controller.Tank shll be mounted on 2 m hgh structure support with access ladder (painted with 2 coats of red oxide primer)The work should be as per Central Electrical Inspectorate/ Pollution control board standards. (Refer Particular specification)
949	EXHAUST PIPESupply and fixing of following sizes of MS pipe as per IS 1239 for exhaust piping complete with bends,supports,flanges welding etc.for exhaust of DG Set including painting, supplying & wrapping 150 mm thick minral wool thick insulation of density 150 Kg per cubic meter on all sides of Exhaust pipe with chicken mesh wrapping and clading with 22 SWG aluminium sheet suitable for this installation complete as required including guide support, expansion joint, SS bellows wherever required and as per specification.
950	300 mm dia. (32 mm thick insulation)
951	400 mm dia. (32 mm thick insulation)
952	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
953	HSD STORAGE AND SUPPLY SYSTEMSupply, installation, testing & commissioning of HSD storage tank 30 KL capacity (6 mm thick shell & 8 mm thick dished shell) as per IS-10987 and approved for construction, shop drawings duly approved by “CCOE” suitable for under ground installation including the following: (Civil work and sand filling by other agency) Inlet and outlet connectionsVent pipe.Dip pipe assembly with calibration chart 550 mm dia manhole with cover. Lifting lugsMS ladder Providing Anti corrosive treatment.Provision for level sensor (BMS) Earthing of HSD Tank
954	HSD storage tank as described above.
955	Supply, installation, testing & commissioning of electrical driven rotary gear pumps suitable for pumping of HSD consisting of following :Horizontally mounted single stage capable of delivering 110 LPM at 30 Mtr. Head while running at required 1440 RPM, complete with proper connection to suction and delivery line, bypass arrangement against over pressure.Flame proof motor for fire protection pumping unit suitable for 400 + 10% V, 3 phase, 50 Hz AC supply and of suitable HP for the above pumps.Flame proof ON/ OFF push button station suitable for above motor including connection and inter connection with starters’s installed in MCC.Common base plate of required strength manufactured out of MS channels.Suitableanti vibration damping arrangement with cushy foot or similar mounting arrangement.Coupling and coupling guard for direct coupling of pump and motor. Pressure gauge with valve on the delivery side.Strainer at inlet.
956	The pump set as described above with outdoor protection duty
957	Providing & fixing M.S. class ‘C’ (heavy duty) pipe & fittings like tees, elbows, junctions, unions, bends, plugs etc.RCC pipe sleeves of larger diameter to the provided wherever the pipes are crossing the wall / slab and sleeves as per Consultant’s requirement, including clamps hangers, nuts, bolts etc for pipe supports from wall / ceiling and wrapping of under Ground pipe with wrapping coating material including cutting and making hole in wall / slab and making good the same.Including a coat of Synthetic enamel paint over two coats of primer complete as required.
958	25 mm dia
959	50 mm dia
960	Excavation of required depth and back filling with compaction in soil for HSD fuel oil piping including ramming the earth and making good.
961	Pipe up to 50 mm dia
962	Providing & fixing Cast steel ball valves of the following sizes suitable for pressure of 10 kg/sqcm complete with all necessary fittings
963	25 mm dia
964	50 mm dia
965	Providing & fixing cast steel non return valves of the following sizes G.M. suitable for pressure of 10 kg/sqcm complete with all necessary fittings
966	50 mm dia
967	Providing & fixing level controller for day oil storage tanks including wiring, cabling, probes with all other accessories for automatic operation of fuel pumps complete as required.
968	Providing & fixing ultrasonic level transmitter with local display unit in plant room for underground oil storage tanks including wiring, cabling, probes with all other accessories for automatic operation complete as required. Level indications shall be compatible with BAS.
969	Providing & fixing oil flow meter with 50 mm dia flanged end for HSD service
970	Providing and fixing Y/bucket strainer for oil supply line
971	50 mm dia
972	Providing & fixing unloading point consisting of 1 No. ‘Y’ strainer, with 1 No. Ball valves on inlet, outlet & by pass 1 No. drain valve, 1 No. 3 meter long flexible hose with necessary suitable connection for all oil tanker outlet complete as required.
973	80 mm dia
974	Providing & fixing GM collection assembly fitted with lockable brass cap suitable for local oil tanker
975	Supply, installation, testing and commissioning of 990 litres capacity dayoil storage tank fabricated from 4 mm thick MS plates.Tank shall include 450 mm ID manhole cover, level indicator andflanged connection for inlet, outlet, overflow drain and probe provision for level controller.Tank shall be mounted on 2 m high structure support with access ladder (painted with 2 coats of red oxide primer).
976	Supply , Installation,Testing and commissioning of 400KVA 3 phase silent type DG set with AMF control panel(with double breakers) complete with all accessories& Required Specification make: JACKSON/KIRLOSKAR
977	SAFETY EQUIPMENTS
978	Supplying and fixing of Shock treatment chart both in Regional, Hindi & English.and framed with 5mm thick glass as required.
979	Supply & fixing HT danger notice plate of 250 mm x 200mm, made of mild steel sheet of at least 2mm thick & vitreous enamelled white on both sides and with inscription in signal red colour on front side as required. (11000V)
980	Supply & fixing MV danger notice plate of 200 mm x 150mm, made of mild steel sheet of at least 2mm thick & vitreous enamelled white on both sides and with inscription in signal red colour on front side as required.
981	Supply of First aid box containing material as prescribed by St. John Ambulance brigade or Indian Red Cross complete as required
982	Providing of Insulatiing mat 1 meter wide & 25mm thick to withstand 36kV dielectric strength as per IS 5424- 1969
983	Providing Single Line Diagram on 5mm thick Aluminium sheet in A0 Size duly laminated.
984	Providing Single Line Diagram on 5mm thick Aluminium sheet in A1 Size duly laminated.
985	Providing Single Line Diagram to be fixed at site as per direction of engineer charge
986	S/F of 2kg ABC Dry powder (S/P) Type Fire Extinguisherpressurized with dry Nitrozen gas at 15 bar.as per IS 15683 with fire rating 2A,21B,at 35 bar,operating temperature-30C to + 55C supplied with standard accessories.as per Gem rate.of any ISI marked.
987	AREA LIGHTING
988	Supplying, Erection, Fixing, connection & testing of LED Street Light of WIPRO WEATHER PROOFLR 02-781-XXX-57-XX or equvalant reputed make ISI marked as approved make with specification LED Luminarie 80 Watt with 9 meterVelmond make maintenance freeG.I POLE with braket including MCB box & including photo sensor with foundation ,CABLE LAYING,TRENCHING as per the Drawing for inspection as required & as perdirection of Engg.-in-Charge.
989	Supplying, Erection, Fixing, connection & testing of LED 2 nos. Street Light of WIPRO WEATHER PROOFLR 02-781-XXX-57-XX or equvalant reputed make ISI marked as approved make with specification LED Luminarie 80 Watt on Double arm with 9 meterVelmond make maintenance freeG.I POLE with braket including MCB box & including photo sensor with foundation ,CABLE LAYING,TRENCHING as per the Drawing for inspection as required & as perdirection of Engg.-in-Charge.
990	Supplying, Erection, Fixing, connection & testing of LED BOUNDRY WALLLight of WIPRO LP02-501-XXX-57-XX or equvalant reputed make ISI marked as approved make with specification LED Luminarie 25 Watt with BRAKET MOVEABLE TYPE maintenance free for inspection as required as per direction of Engg.-in-Charge.
991	Supplying, Erection, Fixing, connection & testing of LED GATE Light ofLP02-501-XXX-57-XX WIPRO MAKE LEDLIGHT or equvalant reputed make ISI marked as approved make with specification LED Luminarie 45 Wattmaintenance freeG.I P ipewith braket including MCB box & including photo sensor with foundation as per the Drawing for inspection as required & as perdirection of Engg.-in-Charge.
992	Supplying, Erection, Fixing, connection & testing of LED Flood Light of LF20-132-060-57-G2 WIPRO MAKE or equvalant reputed make ISI marked as approved make with specification LED Luminarie 120 Watt withmaintenance freeG.I cover boxincluding MCB box & including photo sensor with foundation as per the Drawing for inspection as required & as perdirection of Engg.-in-Charge.
993	Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required as per direction of Engg.-in-Charge.
994	Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
995	Supply and Installation of 4.5 meter high Decorative MS pole (3.6 meter above and 0.9 meter below ground with ladder bars including chatsworth kit, junction box complete as per requirement with all accessories.
996	Cost for electrical inspection of Outdoor installations
997	ELEVATORSDesign, manufactures, supply,installation, sting,commissioning, approvals / laisoning (All local / state/ central statutory bodies) and handing over in satisfactory working conditions of elevators as per specification. Make OTIS/ Thyssenkrup/ Johnson/ Mitusbasi/ Equivalent
998	26 Patient Bed Elevator duplex mode with 2500 x3050 meter shaft, machineroom consisting of ACVVVF Panel,4800mm over head,1800mm Pit including withiring, 1.0 MPS speed, 6 No. Stops , 30 m (Approx.) travilling distance, 1100 mm x2000 mm car size with 800x2100mm car entrance and door opening for stracturewith Automatic with Centre opening ACVVVF Motor Door operator with electronic / infrared sensor door detector, all floor opening in same side ,moon rock finish stainless steel and PVC Flooring with complete all respect as per specification.
999	26 Passenger cum Bed Elevator with duplex modewith 2500 x3050 meter shaft, machineroom consisting of ACVVVF Panel,4800mm over head,1800mm Pit including withiring, 1.0 MPS speed, 4 No. Stops , 30 m (Approx.) travilling distance, 1100 mm x2000 mm car size with 800x2100mm car entrance and door opening for stracturewith Automatic with Centre opening ACVVVF Motor Door operator with electronic / infrared sensor door detector, all floor opening in same side ,moon rock finish stainless steel and PVC Flooring with complete all respect as per specification.
1000	1500kgService Elevator for Dirty utilitywith Simplex modewith 2750 x2750 meter shaft, machineroom consisting of ACVVVF Panel,4800mm over head,1800mm Pit including withiring, 1.0 MPS speed, 6 No. Stops , 30 m (Approx.) travilling distance, 1100 mm x2000 mm car size with 800x2100mm car entrance and door opening for stracturewith Automatic with Centre opening ACVVVF Motor Door operator with electronic / infrared sensor door detector, all floor opening in same side ,moon rock finish stainless steel and PVC Flooring with complete all respect as per specification.
1001	1500kgService Elevator for Dirty utility with Simplex modewith 2750 x2750 meter shaft, machineroom consisting of ACVVVF Panel,4800mm over head,1800mm Pit including withiring, 1.0 MPS speed, 5 No. Stops , 30 m (Approx.) travilling distance, 1100 mm x2000 mm car size with 800x2100mm car entrance and door opening for stracturewith Automatic with Centre opening ACVVVF Motor Door operator with electronic / infrared sensor door detector, all floor opening in same side ,moon rock finish stainless steel and PVC Flooring with complete all respect as per specification.
1002	26 Passenger cum Bed cum Fire Elevator with Simplex modewith 2800 x3050 meter shaft, machineroom consisting of ACVVVF Panel, 4800mm over head,1800mm Pit including withiring, 1.0 MPS speed, 5 No. Stops , 30 m (Approx.) travilling distance, 1100 mm x2000 mm car size with 800x2100mm car entrance and door opening for stracturewith Automatic with Centre opening ACVVVF Motor Door operator with electronic / infrared sensor door detector, all floor opening in same side ,moon rock finish stainless steel and PVC Flooring with complete all respect as per specification.
1003	2000kgService Elevator with Simplex modewith 2800 x3050 meter shaft, machineroom consisting of ACVVVF Panel,4800mm over head,1800mm Pit including withiring, 1.0 MPS speed, 6 No. Stops , 30 m (Approx.) travilling distance, 1100 mm x2000 mm car size with 800x2100mm car entrance and door opening for stracturewith Automatic with Centre opening ACVVVF Motor Door operator with electronic / infrared sensor door detector, all floor opening in same side ,moon rock finish stainless steel and PVC Flooring with complete all respect as per specification.
1004	Design,Manufacture,Supply,Installation,Testing & Commissioing of 13 Passenger Elevator(Lift) for(G+5) building having features of gearless machine,balance speed ,2panel automatic centre opening door with ACVVVF drive in stainless steel silver sky finish,Alarm button in car,Anti-nuisanace ,automatic car fan ,blower fan for ventilation,emergency light,home landing, infra red screen for car door,intercom facility, Red dot matrix scrolling display,audio-visual indication with overload senser,motor overheat protection, Phase failure protection,fireman control,fireman emergency returrn,high class door operation(including door close,open, nudge etc), Automatic Rescue Device etcas per drawing & approved specification & direction of the engineering in-charge. (Make- OTIS/ THYSSENKRUPP/JOHNSHON/MITSUBASI) ( fOR ATTENDANT REST SHED)
1005	UPS SYSTEMSupply, installation, Testing and commissioning of the following rating UPS as per Technical Specifications and complete in all respects.
1006	Supply, Installation, testing and Commissioning of 180 kVA MODULAR UPS with external Isolation Transformer, 3Ø IN / 3Ø OUT online type, with 20 Minutes battery backup, Battery: SMF (Sealed Maintenance Free), VRLA (Value Regulated Lead Acid) type battery, Rack for Modular UPS, connecting cables from UPS & batteries, Parallel kit etc. with isolation transformer For particulars refer Technical specifications and Single line diagram. The UPS shall be suitable for synchronization. (For Medica Equipment Loads)
1007	Supply, Installation, testing and Commissioning of 120 kVA MODULAR UPS with external Isolation Transformer, 3Ø IN / 3Ø OUT online type, with 20 Minutes battery backup, Battery: SMF (Sealed Maintenance Free), VRLA (Value Regulated Lead Acid) type battery, Rack for Modular UPS, connecting cables from UPS & batteries, Parallel kit etc. with isolation transformer For particulars refer Technical specifications and Single line diagram. The UPS shall be suitable for synchronization. (For Non-Medica Equipment Loads)
1008	Supply, Installation, testing and Commissioning of 40 kVA CONVENTIONAL UPS with inbuilt Isolation Transformer, 3Ø IN / 3Ø OUT online type, with 90 Minutes battery backup, Battery: SMF (Sealed Maintenance Free), VRLA (Value Regulated Lead Acid) type battery rack, connecting cables from UPS & batteries, Parallel kit etc. with built in isolation transformer For particulars refer Technical specifications and Single line diagram. The UPS shall be suitable for synchronization. (For Emergency Lighting Load)
1009	ELV SYSTEMCCTV SYSTEM
1010	CCTV (IP VIDEO SURVEILLANCE) SYSTEMSupply , installation , testing and commissioning of Supply, Installation, Testing & Commissioning of 3 MP PTZ Camera , ONVIF profile S , G and Q, UL,CE,FCC Certified , 30 X Optical Zoom , Focal length 4.3mm to 129 mm , 12 X digital zoom , Quad stream ,H.265 , H.264video compression support ,frame rate25 FPS @ 3MP , 50 FPS @ 2 MP ,2 streams simultanepusly at 1920 X 1080 p ,Shutter Speed : 1/1 ~ 1/10000 sec , 360° endless Pan , -20° ~ 200° tilt , Pan Manual Speed : 0.1° ~ 300°/s , Tilt Manual Speed :0.1° ~ 200°/s , 256 presets , 120 dB WDR ,Edge analytics : Abandoned Object, Intrusion Detection, Tampering, Wrong Direction, Loitering Detection, Object Counting, Stopped Vehicle, Object Removal , Inbuilt IR LED , IR Distance upto 200 mtrs ,IP 66.. (Approved make - Axis / Impulse / Avigilon/ Mobotix/ Algovision)
1011	Supply, installation, testing and commissioning of 3 MP bullet camera ,ONVIF profile S & G,UL , CE , FCC Certified ,1/2.8” Progressive Scan CMOS ,2.8 mm to 12 mm motorized varifocal lens ,triple stream ,min illumination : 0.05 Lux @ (F1.2,AGC ON), 0 Lux with IR , Auto switch IR cut filter ,SD card support ,1 input / 1 outputaudio support ,Shutter Speed : 1/5 ? 1/100,000 s , DWDR , Video Compression :H.265 ,H.264, frame rate : 30fps @ 3MP ,Edge analytics : line crossing , perimeter intrusion ,Face detection , cross counting , stationary object , In built IR LED , IR Distance upto 40 meters , IP 66 , POE. (Approved make - Axis / Impulse / Avigilon/ Mobotix/ Algovision)
1012	Supply, Installation, Testing & Commissioning of 3 MP Dome Camera , ONVIF profile S & G ,UL , CE , FCC Certified , 1/2.8\" CMOS sensor ,2.8mm to 12 mmmotorized varifocal , triple stream ,Min Illumination :0.05 Lux @ (F1.2,AGC ON), 0 lux with IR , Shutter Speed : 1/5 ? 1/100,000 s, auto switch IR cut filter ,Video Compression : H.265 , H.264,frame rate 30 fps @ 3MP ,Edge analytics : line crossing , perimeter intrusion ,Face detection , cross counting , stationary object , Inbuilt IR LED , IR distance upto 30 mtrs ,IP 66 , POE .. (Approved make - Axis / Impulse / Avigilon/ Mobotix/ Algovision)
1013	Supply, installation, testing and commissioning of 56\" totally flat colour LCD monitoras per Specification with connectivity complete as required.
1014	Supply , Installation, testing , commissioningof 32 Channel NVR with 4 SATA; 256 Mbps incoming bandwidth(Vantage / Honeywell/ Bosch-make)
1015	Supply , Installation, testing , commissioningof 8 TB Special Surveillance Hard Disk (Seagate/WD-make)
1016	Supply , Installation, testing , commissioningof 6U Val Rack with cooling fan, power manager and cable manager.(ValRack / Net Rack / APW-make)
1017	Supply , Installation, testing , commissioningof CAT6 24 Port Patch Panel.(Molex / Amp / Dlink-MAKE)
1018	Supply , Installation, testing , commissioningof CAT6 Patch Cord 1 Mtr.(Molex / Amp / Dlink-MAKE)
1019	Supply , Installation, testing , commissioningof 24 port 10/100/1000 Mbps, 24 Port Gigabit PoE Switch with 2 SFP Ports.(Netgear / Tplink / Dlink-make)
1020	Supply , Installation, testing , commissioningof 24 port 10/100/1000 Mbps, 24 Port Gigabit Switch with 2 SFP Ports.(Netgear / Tplink / Dlink-make)
1021	Supply , Installation, testing , commissioningof Casing Box for Bullet Cameras(Custom-make)
1022	Supply , Installation, testing , commissioningof 5 Mtrs HDMI Cable(MX / Belkin / Kramer-make)
1023	Supply , Installation, testing , commissioningof 43\" Smart LED TV(Samsung / LG / Sony-make)
1024	Supply , Laying, testing & commissioningof 6 core Armoured Optic Fiber cable in rigid PVC Pipe/Concealed/Casing Caping per running metre of cable used(Molex / Tyco / Hikvision-make)
1025	Supply , Laying, testing & commissioningof CAT6 cable in rigid PVC Pipe/Concealed/Casing Caping per running metre of cable used(Molex / Tyco / Hikvisionmake)
1026	Supply , Installation, testing , commissioningof OFPC SC-LC DPX OS2 SM DPX LS0H 3M YEL(Molex / Amp / Dlink-make)
1027	Supply , Installation, testing , commissioningof SFP Module(Tplink/DG link/D link-make)
1028	Supply , Installation, testing , commissioningof 12 port LIU Unloaded(Molex / Amp / Dlink-make)
1029	Supply , Installation, testing , commissioningof Splicing of OFC cable per core(Custom-make)
1030	Supply and laying of 14 Gauge GI conduits in open conduit & exposed to weather conditions, conduit system using conduit accessories like junction boxes, collars, bends, elbows, binding wires, etc. 25mm dia
1031	Supplying and laying class `B\" NP 2 GI / RCC/Heavy Duty PVCHume pipe embedded in wall / floor / below ground level.The rate shall include excavation, laying of pipe, refilling, consolidating, making the chase in the brick wall, embedding the pipes and redoing the surface.50mm dia
1032	Providing & fixing of Connectors,Port units including junction box with power supply arrangement to different cameras as per direction of engineer in charge
1033	Supply, installation, testing and commissioning ofjoy stick as per Specification with connectivity complete as required.
1034	Supply, installation, testing and commissioning of user Client control software (web based) complete as per spec with valid licenses. The software should enable the user to view multiple cameras in any combination available on the network .
1035	TV SYSTEM
1036	Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
1037	Supplying and fixing following Modular switch/ socket on the existing Modular plate & switch box including connections but excluding modular plate etc. as required.
1038	Modular Flush Type Telephone socket outlet
1039	Supply, laying and termination of RG 11 TV Coaxial cables laying should be done in PVC conduits. Rate shall include the cost of PVC pipes in this item. (TV) M
1040	PVC PIPES
1041	Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
1042	25 mm
1043	20 mm
1044	DATA SYSTEM
1045	Supply , Installation, testing , commissioningof CAT6 24 Port Patch Panel.(Molex / Amp / Dlink-make)
1046	Supply , Installation, testing , commissioningof CAT6 Patch Cord 1 Mtr.(Molex / Amp / Dlink-make)
1047	Supply , Laying, testing & commissioningof CAT6 cablein rigid PVC Pipe/Concealed/Casing Caping per running metre of cable used(Molex / Tyco-make)
1048	Cat 6 Information Outlets
1049	Single Face Plates - 60%
1050	Dual Face Plates - 40%
1051	Quad Face Plates
1052	Blank Inserts
1053	Supply and fixingof Metal box suitableinformation outlet , flush/surface type in position .The rate shall exclude the cost of faceplate and Information Outlet.The rate shall include the costfor wall/floor chasing, cleaning of debris, making good after chase filling of wall / floor.
1054	HUB ROOM SIDE
1055	Supply , Installation, testing , commissioningof CAT6 24 Port Patch Panel.(Molex / Amp / Dlink-make)
1056	Supply , Installation, testing , commissioningof CAT6 Patch Cord 1 Mtr/(Molex / Amp / Dlink-make) of required sizes
1057	VOICE
1058	IPBX
1059	Supply, Installation, Testing and Commissioning of IP PBX (Analog + IP) hyberid as per tender specification -24 Analog Trunk Line, 02 Port PRI Line with 60 Channel Licenses 4000 Analog Extensions , 50 IP Users , Integrated IP Gateway for IP Extension and ITSP\"s,Integrated UC on Motherboard, 120 Channel DSP Resource built in (TDM to IP and Vise versa 5 Party Adhoc Conference, DECT Compatible , Q-Sig Compatible , SIP Compatible, Remote Maintenance , Provisioned With6 Port 300 Mailboxes,100 Auto Attendant 25 UC Smart Client etc. It should be complete as per technical specifications & as per direction of Engineer-in-charge.
1060	Providing On Board UC Smart Client for up to 350 Users with license Sipported with following featuresPresense including status based announcementsFavourites including Call status, Visual Voice Mail, controlVoicemail to e mail service,Ad hoc conferencing (up to 5 party),Call Journal, Directory Access,Instant Messaging , Reminder etc. It should be complete as per technical specifications & as per direction of Engineer-in-charge.
1061	Providing and Installation of PC based Operator ConsoleSupported with following featuresDisplay of Waiting Calls with type, name and telephone number, Call Status displaySpeedy Switching of calls, Individual Configuration of the busy fields with directory number or nameColor display of the busy status: Call, toggle, hold , parkNumber Redial (last 10 destinations) Conference with up to 5 call participants Choice of electronic telephone books: System, telephone book, outlook contacts, internal telephone bool, ldap access etc. It should be complete as per technical specifications & as per direction of Engineer-in-charge.
1062	Providing IP User license for SIP Phone.
1063	Supply, Installation , Testing and Commissioning of Analog Caller ID Speaker Phone.
1064	Supply, Installation , Testing and Commissioning ofIP Phones.
1065	Supply , Laying, testing & commissioningof CAT6 cablein rigid PVC Pipe/Concealed/Casing Caping per running metre of cable used(Molex / Tyco-make)
1066	Supply , Installation, testing , commissioningof CAT6 Patch Cord 1 Mtr/(Molex / Amp / Dlink-make) of required sizes
1067	Cat 6 Information Outlets
1068	Single Face Plates - 60%
1069	Dual Face Plates - 40%
1070	Quad Face Plates
1071	Blank Inserts
1072	Supply and fixingof Metal box suitableinformation outlet , flush/surface type in position .The rate shall exclude the cost of faceplate and Information Outlet.The rate shall include the costfor wall/floor chasing, cleaning of debris, making good after chase filling of wall / floor.
1073	HUB ROOM SIDEFor DATA
1074	Supply , Installation, testing , commissioningof CAT6 24 Port Patch Panel.(Molex / Amp / Dlink-make)
1075	Supply , Installation, testing , commissioningof CAT6 Patch Cord 1 Mtr/(Molex / Amp / Dlink-make) of required sizes
1076	HUB ROOM SIDE FOR CCTV
1077	Supply , Installation, testing , commissioningof CAT6 24 Port Patch Panel.(Molex / Amp / Dlink-make)
1078	Supply , Installation, testing , commissioningof CAT6 Patch Cord 1 Mtr/(Molex / Amp / Dlink-make) of required sizes
1079	HUB ROOM SIDE FOR ACCESS CONTROL SYSTEM
1080	Supply , Installation, testing , commissioningof CAT6 24 Port Patch Panel.(Molex / Amp / Dlink-make)
1081	Supply , Installation, testing , commissioningof CAT6 Patch Cord 1 Mtr/(Molex / Amp / Dlink-make) of required sizes
1082	HUB ROOM SIDE FOR Nurse CONTROL SYSTEM
1083	Supply , Installation, testing , commissioningof CAT6 24 Port Patch Panel.(Molex / Amp / Dlink-make)
1084	Supply , Installation, testing , commissioningof CAT6 Patch Cord 1 Mtr/(Molex / Amp / Dlink-make) of required sizes
1085	HUB ROOM SIDE FOR ACCESS CONTROL SYSTEM
1086	Supply , Installation, testing , commissioningof CAT6 12 Port Patch Panel.(Molex / Amp / Dlink-make)
1087	Supply , Installation, testing , commissioningof CAT6 Patch Cord 1 Mtr/(Molex / Amp / Dlink-make) of required sizes
1088	FIBRE BACKBONE CABLE CONNECTIVITY BETWEEN HUB ROOMS & RACKS
1089	12 Core OM4 Multimode, Indoor /Outdoor, jacket/armoured, gel-free, LSZH, standard loose tube, for within the building Fiber Optic Cable
1090	Supply , Laying, testing & commissioningof CAT6 cablein rigid PVC Pipe/Concealed/Casing Caping per running metre of cable used(Molex / Tyco-make)
1091	1U Sliding Face Plate shelf to accommodate 24 port LP adapters (Front Face Plate full single Plate type)
1092	Front Face Plate Panel, Accepts 24 Duplex LC Adapters
1093	LC Duplex Adapter
1094	Supply , Installation, testing , commissioningof SC SM Pigtail OS2 9/125 OS2(Molex / Amp / Dlink-make)
1095	RoloSplice Kit 2 Fusion Splice Trays, for 1U Fiber Shelf
1096	Multimode Fiber Patch chords of 3 meters- LC TO LC
1097	CLOSED RACK
1098	Supply & Installation of 42 U closed rack with required accessories asper direction of engineer in charge
1099	Supply & Installation of 9 U Wall mount rack with required accessories asper direction of engineer in charge
1100	Supply & Installation of 15 U Wall mount rack with required accessories asper direction of engineer in charge
1101	Testing & Commissioningof DATA system
1102	NURSE CALL SYSTEM
1103	Supply, Installation, Testing & commissoning Charges of VDE 0834 APPROVED PATIENT HANDSET WITHOUT VOICE shall consist of :- 1 x RJ 45 Jack for connecting in to connection module with autodisconnecting technology intellifix- Membrane Key pand with Nurse Call Button- Soft touch buttons for Optinally controll of room and bed lights- Integrated Finder and reassurance light- Antimicrobial Coating- Cradle for mouting the handset(Schrack / Bosch / Honeywell-make)
1104	Supply, Installation, Testing & commissoning Charges of SITC OF VDE 0834 complied BEDSIDE CONNECTION MODULE WITHOUT VOICE for connecting the patient handset shall consist of :-Mounting rail with board, 2 x RJ45 sockets for connecting the data bus-Membrane keypad with Call button and Cancel / Presence Button and integrated reassurance LED light- 1x RJ 45 socket with for connecting without voice Patient handset- 1 x 5 Pole DIN connector to be used as a diagnostic port- 4 x RJ 12 connection to be used for connecting Buttons and Lamp module- Antimicrobial Keypand- It should include Countersunk fitting Box(Schrack / Bosch / Honeywell-make)
1105	Supply, Installation, Testing & commissoning Charges of Pull Button with integrated finder lights or reassurance light, micro switch with a 2 metre pull cord and aluminous grip with a nurse symbol printed on it, Countersunk switchbox etc., complete. Pull cord characteristics with max. force at break 120N (ca.12 kg) for hygiene reasons it must also be possible to change the pull cord very easily using a snap hook for Basic Device, 4 screw-type terminals for connecting the power supply circuit etc., complete. (Schrack / Bosch / Honeywell-make)
1106	Supply, Installation, Testing & commissoning Charges of SITC OF VDE 0834 approced STAFF TERMINAL consist of :- Bright 6.5 inch TFT display with wide viewing angle, resolution of 800 x 480 pixel and LED backlight for displaying all details - Interactive operation via touch sensor field and icons,- 2 unit foot postions for different angles of inclination or wall mounting,- Answering receiver for speaking discretely,- Microphone and loudspeaker for hands-free speech (incl. volume control),- Automatic changeover between hands-free and discrete speaking,- 100BaseTX interface to the system switch,- 2.8 m connection cable with an RJ45 connection plug, which is protectedfrom disconnection(Schrack / Bosch / Honeywell-make)
1107	Supply, Installation, Testing & commissoning Charges of LAMP module For optical indication of calls, presences and reminders in the relevant colours conforming to VDE0834 consisting of:- 4 light chambers with light reflectors for homogeneous illumination,- 1 light chamber fitted with 3 ultra bright red LEDs,- 1 light chamber fitted with 3 ultra bright white LEDs,- 1 light chamber fitted with 3 ultra bright green LEDs,- 1 light chamber fitted with 3 ultra bright blue LEDs,- Every light chamber conforms to the light strength set out by VDE0834,- the LED life expectancy is approximately 100,000 operating hours,(Schrack / Bosch / Honeywell-make)
1108	Supply, Installation, Testing & commissoning Charges of EVENT DATABASE LICENSE which will enable of lgging of all the events (e.g. Calls, Presences Etc. ) on the management Centre.
1109	Supply, Installation, Testing & commissoning Charges of VDE 0834 APPROVED SYSTEM SWITCH (FIELD SWITCH) to form a decentralized node for data exhange hub Consist of:- 1 x RJ45 socket, 100Mb IP Port (IEEE802.3 100BaseTX), galvanically isolated conformant with EN 60950 and VDE 0834 - 8 x RJ45 POE sockets, each with a 100Mb IP system port (IEEE802.3 100BaseTX) for connection of all IP capable system modules,- 2 x 2 x RJ45 sockets for connecting the I/O data buses capable of connection up to 125 Buttons, Patient Handset Etc with inbuilt Power supply to Buttons- Supervised 24VDC output for extrnal devices e.g. Lamp module- Also have the Netorking feature Layer 2 NSP Ethernate type 0x3000, IEEE 802.1p Priority, IEEE 802.1Q VLANs, RFC 768 UDP, RFC 783 TFTP Protocol (revision 2), RFC 793 TCP, RFC 826 ARP, RFC 854 TELNET, RFC 951 BOOTP, RFC 2236 IGMPv2
1110	Supply, Installation, Testing & commissoning Charges of Display Output Module, AS PER DIRECTION OF ENIGEER IN CHARGE Included(Schrack / Bosch / Honeywell-make)
1111	Supply, Installation, Testing & commissoning Charges of Room Terminal without Display(Schrack / Bosch / Honeywell-make)
1112	Supply, Installation, Testing & commissoning Charges of Room terminal with speech function for fitting in patient rooms and other important rooms as a communication center(Schrack / Bosch / Honeywell-make)
1113	Supply , Laying, testing & commissioningof CAT6e cablein rigid PVC Pipe/Concealed/Casing Caping per running metre of cable used(Reputed-make)
1114	Supply, Installation, Testing & commissoning Charges of Manangement Centre used during the commissioning of the system for reading in the system topology, for uploading the fi rmware and the system confi guration, for operating interfaces to foreign systems, for logging of all system events and as a central location for system confi guration and remote maintenance. The minimum requirements for the management center are as follows:- Intel Xeon E3 2,3 GHz or similar, 4 GB RAM,1 x 500 GB HDD,1 x DVD harddrive, 2 x Gbit LAN Ethernet RJ45, 4 x USB V2.0, 1 x PCI or 1 x PICe socket, Preloaded SUSE Linux enterprise server from V.11-SP1 and Nurse Call Necessary Softwares and licesnces(Dell / Lenovo / hp-make)
1115	Main Distribution Unit/ System Switch
1116	Supply and Installation of System Switch forms a decentralised communications node for exchanging data between the connected system devices and the rest of the communications system, consisting of Metal case, including interconnection etc., complete. The assembly shall be surface mounted in the brick wall or Nurse Station Working Table.
1117	Nurse Call Pull Chain Unit (Toilet Unit) / Pull Button
1118	Supply and Installation of Pull Button with integrated finder lights or reassurance light, micro switch with a 2 metre pull cord and aluminous grip with a nurse symbol printed on it, Countersunk switchbox etc., complete. Pull cord characteristics with max. force at break 120N (ca.12 kg) for hygiene reasons it must also be possible to change the pull cord very easily using a snap hook for Basic Device, 4 screw-type terminals for connecting the power supply circuit etc., complete.
1119	Lamp Module / Room Indicator
1120	Supply and Installation of optical indication of calls, presences and reminders in the relevant colours conforming to VDE0834 and suitable for fitting on to an installation case, consisting of, 5 light chambers with light reflectors for homogeneous illumination, 1 light chamber fitted with 3 ultra bright red LEDs, 1 light chamber fitted with 3 ultra bright white LEDs, 1 light chamber fitted with 3 ultra bright green LEDs, 1 light chamber fitted with 3 ultra bright yellow LEDs, 1 light chamber fitted with 3 ultra bright blue LEDs, Every light chamber conforms to the light strength set out by VDE0834, the LED life expectancy is approximately 100,000 operating hours,For Basic Device RJ12 socket for connection to the data connection, 4 screw-type terminals for connecting the power supply circuit, Countersunk switchbox etc., complete.
1121	Supply and Installation of 24 Volt DC Switched-Mode Power Supply (SMPS) with following specifications as detailed below,I/P 115-230VAC O/P 24 V DC CURRENT : 10 A POWER RANGE : 90-180W
1122	ACCESS CONTROL SYSTEM
1123	Supply and installation of Card readers based on RFID technology, along with Back Plate including all fixing accessories. Rate shall include required accessories, tools and tackles, transportation, material and labour etc., complete as instructed by Engineer In charge. The contractor should follow the safety measures inside the premises.
1124	Supply and installation of Biometric Unit consisting of Bio Metric scanner and Proximity Card Reader based on RFID technology, with Back Plate including all fixing accessories. Rate shall include required accessories, tools and tackles, transportation, material and labour etc., complete as instructed by Engineer In charge. The contractor should follow the safety measures inside the premises.
1125	Supply and installation of Proximity Access Card (16k bit with 2 application areas)with print as per client requirement
1126	Supply and installation of Single Leaf 600 Lbs Magnetic Lock with required mounting accessories, Rate shall include required accessories, tools and tackles, transportation, material and labour etc., complete as instructed by Engineer In charge. The contractor should follow the safety measures inside the premises.
1127	Supply and installation of Exit Push Button (Egress Switch), Rate shall include required accessories, tools and tackles, transportation, material and labour etc., complete as instructed by Engineer In charge. The contractor should follow the safety measures inside the premises.
1128	Supply and installation of Break glass unit, Rate shall include required accessories, tools and tackles, transportation, material and labour etc., complete as instructed by Engineer In charge. The contractor should follow the safety measures inside the premises.
1129	Supply and installation ofUL, CE approved Access Controller - Smart card reader interfaces for 1 door, supports up to 2 smart card reader interfaces, Network connection to the host system and Compact Flash,RS485, RS232 or Ethernet connectivity, 20,000 cardholders data & up to 100,000 transaction detail storage, includes housing which shall be in accordance with UL guidelines and is used for securely mounting and housing the Access Controller, extensions and the power supplies.
1130	Supply and installation ofUL, CE approved Access Controller - Smart card reader interfaces for 2 door, supports up to 4 smart card reader interfaces, Network connection to the host system and Compact Flash,RS485, RS232 or Ethernet connectivity, 20,000 cardholders data & up to 100,000 transaction detail storage, includes housing which shall be in accordance with UL guidelines and is used for securely mounting and housing the Access Controller, extensions and the power supplies.
1131	Supply and installation of Power supply with battery charger for ACCESS DOOR CONTROLLERShall be with Selectable 12 VDC or 24 VDC voltage outputOvervoltage protectionRegulates battery charging voltageThe product is classified in accordance with the following standards:• EN 55022 Class B• EN 55024• IEC / UL / EN 60950 & CSA (product safety)• CEThe Power supply can be mounted on rails and installed in the housing
1132	Supply and installation of Door Buzzer, Rate shall include required accessories, tools and tackles, transportation, material and labour etc., complete as instructed by Engineer In charge. The contractor should follow the safety measures inside the premises.
1133	GI back boxes for mounting readers/exit switch/break glassin wall / partitions
1134	Supply , Laying, testing & commissioningof CAT6 cablein rigid PVC Pipe/Concealed/Casing Caping per running metre of cable used(Molex / Tyco-make)
1135	8 Core .75 sq MM Shielded unarmoured Cable, as per the survey done, Rate shall include required accessories, tools and tackles, transportation, material and labour etc., complete as instructed by Engineer In charge. The contractor should follow the safety measures inside the premises.
1136	4 Core .75 sq MM unarmoured Cable, as per the survey done, Rate shall include required accessories, tools and tackles, transportation, material and labour etc., complete as instructed by Engineer In charge. The contractor should follow the safety measures inside the premises.
1137	2 Core .75 sq MM unarmoured Cable, as per the survey done, Rate shall include required accessories, tools and tackles, transportation, material and labour etc., complete as instructed by Engineer In charge. The contractor should follow the safety measures inside the premises.
1138	4C 1 sq mm shielded cable (For Controller)
1139	Supply and laying of 14 Gauge GI conduits in open conduit & exposed to weather conditions, conduit system using conduit accessories like junction boxes, collars, bends, elbows, binding wires, etc. 25mm dia
1140	FIRE FIGHTING SYSTEM
1141	FIRE PUMPS & ALLIED WORKS
1142	Supply,Installation, testing and commissioning of Electrical motor driven Centrifugalpump set for fire fighting Hydrant & Sprinkler system consisting of the following :a) Horizontal Centrifugalsingle stage pump. End suction, top discharge with all accessories capacity 2850 lpm at 100 m head with CI casing, standard fitting, CS diffusers, bronze impeller (dynamically balanced) and SS (304) Shaft withmechanical seal. The installation shall be completewith flexible coupling and coupling guard,150 mm dial pressure gauge of0-16 kg/cm2 range with gun metal shut off cock on delivery side as required. (The pump should be tested for bench mark at factory and test certificate shall be submitted).
1143	Pump shall be capable of furnishing not less than 150% of rated capacity at a head of not less than 65% of the rated head. The shut off head shall not exceed 120% of rated head.b) Squirrel cage induction motor, TEFC type suitable foroperation on 415 volts, ± 10%, 3 phase50 HZ ± 3%. A.C supply, for the above pump withspeed of (synchronous speed 2900 rpm), conforming to IP 55 protection & class-F insulation. The motor shall conform to IS 325-1978 withflexible couplingand couplingguard, complete as required.c) Common base plate for (a) and (b) made of M.S. Channel of required size.e) Cost of all the items accessories tools and tackles packing etc. required to put pumping system into service.
1144	Supply,Installation, testing and commissioning of Diesel driven CentrifugalSTAND BY PUMP SET for fire fighting Hydrant & Sprinkler system consisting of the following :
1145	Supply, installation,testing and commissioningofDieselEngine driven fire pump suitable for automatic operationcomprisingofthe following and conformingtoBS 649/IS 10002all amended upto date.Horizontal, cetrifugal end suction top discharge single stage pump set. The installation shall be complete with flexiblecouplingandcoupling guard asrequired. Firepumpshall have C.I. casing, CS diffusers,bronze impeller(hardfinished and dynamically balanced) and SS (304) shaftwithmechanical seal, capable for delivering 2850 lmp at head of 100 mts to ensure a minimum pressure of 3.5 Kg/Sqcmat the farthest or topmost hydrant / sprinkler.The installation shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side (The pump should be tested for bench mark at factory and shall be gotten approved by the Local fire Authority).
1146	Pump shall be capable of furnishing not less than 150% of rated capacity at a head of not less than 65% of the rated head.The shut off head shall not exceed 120% of rated head.Radiator cooled (secondary cooling)diesel engine of speed 1500 RPMsuitable for theabovepump with automatic starting mechanism and other accessories including fuel tank (fabricated from 3mm MS sheet, painted with two coats of synthetic enamel paint over a coat of primer) of capacity adequate to sustain pump operation for 8 hours continuous working. The tank shall befitted withMagnetic oil level indicator, MH with cover, drain valve, air vent includingstructuralsupports (painted with approved shade), 2 Nos. x 12 volt battery, heat exchanger with necessary piping connections & fittings, flexible coupling, coupling guard & exhaust pipe connection complete as required.Commonbaseplate for (a) and (b) from M.S. channel of required size.Suitable cement concrete foundation with plaster, (design and drawing to be provided by the Contractor while the foundation will be done by others) complete with antivibrationarrangementof cushy foot mountings.
1147	Supply,Installation, testing and commissioning of horizontal single stage Jockey pump of capacity 180 lpm at 100 m headfor fire fighting system comprising of the following:
1148	a) Single stage horizontal end suction & top discharge Jockey pump, suitable for operation on 415 volts ± 10%, 3 phase, 50 HZ± 3% A.C supply. The installation shall be complete with Flexible coupling and coupling guard, complete as required.The pump casing shall be CI, shaft shall be SS & impeller/ shaft sleeve/casing wearing ring shall be bronze. The pump shall be provided with mechanical seal. The system shall be complete with 150 mm dial pressure gauge of 0-16 Kg/m2 range with gun metal shut off cock on delivery side, as required. (The pump should be tested for bench mark at factory and test certificate shall be submitted).
1149	b) Squirrel cage induction motor, TEFC type suitable foroperation on 415 volts, ± 10%, 3 phase50 HZ ± 3%. A.C supply, for the above pump withspeed of 2900 rpm (synchronous speed 3000 rpm), conforming to IP 55 protection & class-F insulation. The motor shall conform to IS 325-1978 withflexible couplingand couplingguard, complete as required.c) Common base plate for (a) and (b) from M.S. channel of required size.d) Cost of all the items accessories tools and tackles packing etc. required to put pumping system into service.For pump defined above & of duty as follows :Flow : 180 lpmHead : 100 mts
1150	Supply,Fabricating, fixing, testing and commissioning of air cushion tank (material IS 2062/2002) with SS air-release valve of approved quality with S.S isolation valve, GM drain valve, gate valve, provision for pressure switches, pressure gauge etc.inside the pump house including making inlet and outlet connection with MS pipe of required length from discharge header to air cushion tank, fixing properly and securing the same to the base etc. complete in all respect having painting including two coats of approved paint over a coat of primer. The tank shall be fabricated out of 8mm thick MS sheet shall be of cylindrical shape with 300mm dia and 1.5m height. The tank shall be installed on suitable vertical legs having M.S. plate of size 75mm x 75mm x 5mm at the bottom. The legs shall be grouted in Cement concrete foundation. Flange connection shall be provided for connection with discharge header. The tank shall be tested at 25 kg/sq.cm before installation.
1151	Electrical Motor Driven Fire Hydrant Pump of Capacity 97 m3/hr, 56 mtr head, with Kirloskar make 30 KW/40 HP, 2 Pole IE2 motor, Cast Iron Body, bronze impeller, Carbon steel shaft(C-45), fitted with Gland Packing, base frame, coupling, coupling guard etc complete set, as per technical data sheet enclosed. Pump shall be capable of furnishing not less than 150% of rated capacity at a head of not less than 65% of the rated head. The shut off head shall not exceed 120% of rated headMake : KIRLOSKAR, Pump model : DB 65/20/equivalentSCOPE OF SUPPLY : PUMP + MOTOR + BASE PLATE + COUPLING( For ancillary building)
1152	Supply, installation, testing & commissioning of Diesel Engine Driven Horizontal End Suction back pullout type Fire Pump of Capacity 97 m3/hr, 56 mtr head, with 42 HP Radiator Cooling Diesel Engine, 1800 RPM Cast Iron Body, bronze impeller, Carbon steel Shaft(C 40), fitted with Gland Packing, base frame, coupling, coupling guard etc , but without Battery, as per Technical Data Sheet enclosed. Pump shall be capable of furnishing not less than 150% of rated capacity at a head of not less than 65% of the rated head. The shut off head shall not exceed 120% of rated headMake : KIRLOSKAR, Pump Set Model: KFE-E1702R-G86/equivalentSCOPE OF SUPPLY : PUMP + ENGINE + BASE PLATE + COUPLING (For ancillary building)
1153	Supply of Vertical Inline Multistage Jockey Pump of Capacity 180 LPM(10.8m3/hr), 56 mtr head, with 3 KW Vertical motor, with stainless steel impeller &shaft, base frame, coupling, coupling guard etc complete set,Make : KIRLOSKAR, Pump model : KCIL 10-8,SCOPE OF SUPPLY : PUMP SET( For ancillary building)
1154	MCC for Fire Pumps :Design, manufacture, supply ,installation, testing and commissioning of following Automated Fire panel suitable for 415V, 3 phase, 4 wire, 50 hz power distribution system. The panel should be indoor, free standing, floor mounting, sheet metal clad, Cubicle, dead front, dust and vermin proof, compartmentalized design fabricated out of 2mm CRCA sheet complete with Cu busbars, a separate earth bus bar to be provided through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a modular multitier arrangement, adequate size cable alley, painting, earthing numbering, damper plate etc. as required as per direction of engineer-in-charge and as per local Fire Authority requirement.The panel shall be fabricated by only CPRI approved manufacturer (Make:L&T/Legrand/Siemens/Powertech/CPRI approved)As per the details below
1155	INCOMING1 Nos 200A FPMCCB (50 KA), 1 Set of 400 Amps. TPNCu. Bus bars with color coded heat shrinkable PVC sleeves. Indicator R,Y,B,ON,OFF,TRIP. Ammeter LCD type display+3 CTs,Voltmeter LCD type displayOUTGOINGFEEDER FOR MAIN PUMPS - 01 No :01 No160 A TP MCCB, withstar delta Startercontactor and OLR ratings as per type 2 co-ordination,with(digital ammeter, voltmeter, ON,OFF push (For ancillary building)button, local remote switch,auto manual seclector switch etc.FEEDER FOR JOCKEY PUMP - 01 No:01 No32 A TP MCCB, withstar delta Starter contactor and OLR ratings as per type 2 co-ordination, withDigital Ammeter,voltmeter, ON,OFF push button, local remote switch, auto manual selector switch etc.DIESEL ENGINEPUMP01 No a) 25Amps DPMCB - 01 No( b) Battery charger resistance DC ammeter, DC voltmeter, on/off selector switch - 1 No (c) 1 set of indicating lamps for the following : 1. Phase indication 2.Battery charger on 3.Over load relay 4. DC supply on 5.Control switch on 6. Engine fails to start7. Pump on8. Low oil pressure 9. High water temperature10. Auto manual selector switch (d) 1 sets of push button stations for the following : 1. Engine Start 2. Engine Stop 3. Engine - hooter ACK
1156	4. Engine - fault reset(e) Selector switches (Engine control, mode selector)-1 No ( f) Auxiliary relays / contactors / timer for sequence operating for starting and stopping of the engine - 1 set (g) Hooter for audio alarm (Industrial type) - 1 No. (h)Automatic source transfer Relay with 3 attempt starting,High Low Lube pressure, timers and relays as required and suitable contactor.Programmable Logic Controller for automatic operation.All the components shall be housed in a common cubical made of 2mm CRCA sheet with required stiffeners ( if required). The panel shall be powder coated of approved color both inside & out side. The panel shall have both bottom & top cable entry provisions and panel shall be mounted on Pedestal of 300 mm height. Also panel shall have sufficient (min. 10 Nos) NO/NC contacts for extending the status( annunciation) of fire pumps to the Fire alarm panel.
1157	Supply, Providing & fixing 150 mm dial type Pressure gauge of (0-16kg/cm2) range with gun metal shut off cock etc. duly calibrated before installation in MKS and FPS units and fixing the same where required as directed including all fittings, short piece, nipples, elbows testing the joints etc.all complete. (Quantity of this item will be payable only where it has not been included in the relevant composite items).
1158	Supply,Installation ,Testing & Commissioning of Monobloc type Boosting Fire pump of capacity 900 LPM @ 35 M Head with c 415 V Three PhaseMotor (15HP)complete with all associated accessories. Make - Kirloskar/Equivalent
1159	Supply,Providing & fixing Pressure Switchthe most commonly used fluid control components of Aluminum enclouser with storage temprature 40 to 180°F (-40 to 82°C) along with ambienttemprature 0 to 160°F (-18 to 71°C),set point shifts less than 1% of range for a 50°F (28°C) ambient temperature change. Unit will operate down to -40°F (-40°C) but with reduced repeatability. Maximum media temperature 200°F (93°C), Shock Set point repeats after 50 G, 10 millisecond duration. Switch output One SPDT including seven electrical terminations; Refer to \"How to Order\" and vibration set point repeats after 10 G, 5-500 CPS.
1160	Providing and fixing CI double flanges suction strainer (PN 1.0) “Y” type including, nuts, bolts and 3mm thick rubber insertion complete. (Suction Side)
1161	200mm dia
1162	Providing and fixing butterfly valves, wafer end type class PN 1.6 as per IS: 13095-1991 or BS: 5155, including necessary nuts, bolts, gaskets etc. complete (without gear box) (Discharge Side)
1163	a) 200mm dia
1164	b) 150mm dia
1165	c) 100mm dia
1166	d) 50mm dia
1167	Providing & Fixing of CI gate Valve as per IS : 14846 (PN 1.0 Rating for suction side of the pumps ) and rising sprindle type with falnges , bolts , nuts , washers , gaskets etc.
1168	a) 200 mm dia
1169	b) 65 mm dia
1170	c) 80 mm dia tank drain out
1171	Supply, installation, testing and commissioning of UL/approved Cast Iron Non-Return Valves including making flanged joints byproviding necessary nuts, bolts, gasketsetc. .(Discharge Side)
1172	a) 200 mm dia
1173	b) 150 mm dia
1174	c) 50 mm dia
1175	Supply, installation, testing & commissioning heavy class MS suction & delivery headers ofrequiredlength conforming to IS: 1239 up to 150 mm dia pipes and IS:3589 with 6.35 mm thick with welded joints standard MS Fittings and with end flange connections having inlet & outlet flanged connections including supports from wall, floors & ceiling complete as required. Cost should be inclusive of all supports / clamps / brackets, anchorfastner, flexible expansion bellows etc. as required
1176	a) 25 mm dia
1177	b) 50 mm dia
1178	c) 65 mm dia
1179	d) 150 mm dia
1180	e) 200 mm dia
1181	f) 250 mm dia
1182	Painting with two coats of Synthetic enamel paint of approved shade and brand over a coat of Red oxide zink chromate primer. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Includingpaintingoflegends and direction completed as per the approval of the Engineer- in- charge.
1183	a) 25 mm dia
1184	b) 50 mm dia
1185	c) 65 mm dia
1186	d) 150 mm dia
1187	e) 200 mm dia
1188	f) 250 mm dia
1189	Providing and fixing exhaust, Diesel engine driven pump exhaust M. S. pipe class ’B’ of suitable dia (150mm dia) for the engine including fitting like flanges, bends, reducers, etc. The pipe shall be provided with 12 mm thick supercera ceramic fibre rope, 21 gauge, necessary excavation, fixing of silencer connections at engine exhaust, necessary supports, back filling, cutting and making good, bird proof and weather proof flap complete in all respect as directed.
1190	150 mm dia
1191	Providing & fixing double flanged flexicon rubber expansion (bellows) joint with unit control of standard length as per maufacturers specifications suitable for working pressure of 15Kg/Sqcm including rubber gaskets, flanges, nuts, bolts and washers complete as required for suction and delivery of pumps.
1192	a) 200 NB
1193	b) 150 NB
1194	c) 65 NB
1195	d) 50 NB
1196	Providing and installation of GM Ball Valve, IS-318 LTB-2 SS Stem AISI 410, Ball SS 304/CF8, teflon gland packing, screwed female threads to IS-554,
1197	a) 25 NB
1198	Providing and Installation of vibration eliminationpads for pumps.
1199	a) Type A (for Jockey pumps)
1200	b) Type B ( Mainfire pumps)
1201	Supply, installation, testing and commissioningof Fire Brigade inlet connection with provision for Four male instantaneous coupling fabricated out of 150 mm dia. approved make heavy class MS pipe with non-return valve, Butterfly valvefor fire fighting system including making connection by providing necessary piping & fittings to the fire storage tank, fire fighting wet riser, sprinkler system painting the same with 3 coats of enamel paint over a coat of Zinc Chromate primer all complete as per drawings, specifications.
1202	a) Four way
1203	Gun-metal Fire brigade suction hose coupling (Draw-out Connection) with nut for female coupling as per IS:902-1974 complete with 100 mm dia. MS suction pipe and 100 mm dia. 1 No. CI foot valve flanged (to be connected to static water tank).
1204	Providing & Fixing of C.I. Foot Valve of following sizes and complete in all respect with all labour, tools & plants, transportation, taxes, levies etc. and as per specification, drawing and direction of Engineer-in-charge.
1205	100mm NB
1206	MCC cum control panel
1207	FIRE PANEL & ACESSORIES:
1208	SITC of Composite Pump Controller for sequential start/stop of above main fire pumps and jockey pump, complete in all respect.(The prices are inclusive of all taxes).The composite parts should be of L&T/SIMENCE/HAVELS/ANCHOR
1209	L.T.Cables
1210	Supply, installation, testing and commissioning of following sizes of PVC sheathed XLPE insulated Aluminium Copper conductor/ power/control armoured cables of 1100V grade on surface of wall or in existing cable trays with fixing hardware etc. as required.
1211	Aluminium Conductor armoured cables:
1212	3.5 x 120 Sq mm
1213	3.5 x 70 Sq mm
1214	3.5 C x 6 Sq.mm
1215	4 C x 4 Sq.mm
1216	4 C x 2.5 Sq.mm
1217	12C x2.5sqmm
1218	2C x1.5sqmm
1219	3.5C x 16sqmm
1220	Cable Termination :
1221	Supply &making end termination with brass Double compression glands for the following XLPE insulated PVC sheathed 1100 V grade cable including cost of crimping lugs/ ferrules, compression glands, solder, cable sockets, insulation tape etc. complete as reqd.Suitable for aluminium conductor armoured cables:
1222	3.5 x 120 Sq mm
1223	3.5 x 70Sq mm
1224	3.5 C x 6 Sq.mm
1225	3.5 C x 4 Sq.mm
1226	3.5 C x 2.5 Sq.mm
1227	EARTHING
1228	Supply, installation, testing & commissioning of following size G.I. Strip/G.I. wire clamped to existing cable tray, wall for system/equipment earthing complete as required including interconnection etc.
1229	25mm G.I Strip
1230	8 SWG . G.I wire
1231	EXTERNAL PIPING (Hyd + Spk) - UNDERGROUND / ABOVE GROUND PIPES
1232	Supply, installation, testing & commissioningof MS pipe (IS:1239/IS:3589) heavy class including cutting, screwing, welding etc. complete with fitting viz. tees elbow, bends, flanges, reducers etc. including providing anti-corrosive treatment (coating and wrapping) with 4 mm thick tape and holiday test check as per IS:10221, 50mm sand filling around the pipe complete as required.All sub soil piping shall be treated as per IS code and refilling shall only be carried out after inspection and permission of the Engineer-in-Charge. FOR UNDERGROUND PIPING Make-Tata/Jindal/Sail.
1233	EXT. HYDRANT PIPING
1234	150 mm dia
1235	80 mm dia
1236	50mm dia
1237	Supply, installation, testing & commissioningof MS pipe (IS:1239/IS:3589) heavy class including cutting, screwing, welding etc. complete with fitting viz. tees elbow, bends, flanges, reducers etc.After inspection and permission of the Engineer-in-Charge. FOR ABOVE GROUND PIPING
1238	80 mm dia
1239	Painting with two coats of Synthetic enamel paint of approved shade and brand over a coat of Red oxide zink chromate primer. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Includingpaintingoflegends and direction completed as per the approval of the Engineer- in- charge.
1240	80 mm dia
1241	Supply, installation, testing and commissioningof courtyard SS metal single headed hydrant valve as per IS: 5290 consisting of 63NB. single outlet flanged oblique type hydrants valve with instantaneous female plunger type coupling, chained blank cap including making flanged joints by providing necessary nuts, bolts, gaskets all complete as per specifications suitable for 80 NB stand post. (as required External)
1242	Providing and placing in proper position Non-percolating flexible hose (RRL type-\"A\") ISI marked (IS:636) 63 mm dia x 15 M long complete with instantaneoustype gunmetal 63 mm dia. IS marked male and female couplings (IS:903) bound and riveted to hose pipe with copper rivets and 1.5 mm copper wire.
1243	Providing and placing in proper position SS 63mm dia short size branch pipes with 20 mm dia nozzles with 63mm instantaneous coupling ISI marked (IS: 903).
1244	Weather proof hose cabinets for external yard hydrant fabricated from 16 g MS sheet with full glass door and locking arrangement, suitable to accommodate one hydrant valve, 2 nos.15m long hose, 1 No branch pipe. The cabinet shall be painted with one coat of primer and finished stove enamelled \"Fire Red\", \"Fire Hose\" written on front including suitably mounted on a raised masonry platform as required. (Approx 0.6mx0.6 mx 0.45 m).
1245	Providing and fixing butterfly valves, wafer end type class PN 1.6 as per IS: 13095-1991 or BS: 5155, including necessary nuts, bolts, gaskets etc. complete (without gear box) (Discharge Side)
1246	150 mm dia
1247	80 mm dia
1248	Providing and fixing RCC Hume Pipe NP 3 as per IS: 458 (For Road Crossing) / HDPE SN-8
1249	300 mm dia
1250	C. INTERNAL SPRINKLER & PIPING WITH ACCESSORIES
1251	Supply,Providing, fixing, jointing and testing in positionfor sprinkler system following \"C\" classMS pipes conformingto IS:1239 cut to required lengths including all necessary fittings (All fittings shall confirm to IS:1879 (part 1 to 10) and specials such as bends, tees, unions, Reducers,flanges & plugs etc.fixing at wall / ceiling level supported by clamps, hangers (using anchor fastners) etc, as per specification. Threading, jointing, and making proper connections, cutting hole in wall / floor / slab and making good the same. GI pipe sleeves suitable higher size shall be provided wherever the pipes are crossing the fire rated walls / floors slab and sealing the sleeves with glass wool in between and fire sealent compound at either end all as perConsultant / Employers\" requirement. All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwise and the supply of the same shall also be included in rates under this head. (NOTE: FITTINGS UP TO 50 MM SHALL BE HEAVY DUTY MS FORGED SOCKET WELDED & 65 MM AND ABOVE SHALL BE HEAVY DUTY BUT WELDED).(Note:-The quoted rates of the contractor shall also include the cost of Fire sealant as required. Welding of any kind on the galvanised support / hanger shall not be permitted. )
1252	a) 25 mm dia
1253	b) 32 mm dia
1254	c) 40 mm dia
1255	d) 50 mm dia
1256	e) 65 mm dia
1257	f) 80 mm dia
1258	g) 100 mm dia
1259	i) 150 mm dia
1260	Painting with two coats of Synthetic enamel paint of approved shade and brand over a coat of Red oxide zink chromate primer. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Includingpaintingoflegends and direction completed as per the approval of the Engineer- in- charge .
1261	a) 25 mm dia
1262	b) 32 mm dia
1263	c) 40 mm dia
1264	d) 50 mm dia
1265	e) 65 mm dia
1266	f) 80 mm dia
1267	g) 100 mm dia
1268	i) 150 mm dia
1269	Supply,Providing & fixing Butterfly valve conforming to IS-13095, PN 1.6 (Body : Grey Cast Iron, Shaft : SS, Disc : SG Iron (Rilson coated), Liner : HT - EPDM) (upto150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 15 Kg/Sq.cm. Including rubber gasket, flanges, nuts, bolts, washers & painting complete as required.
1270	a) 150 mm dia
1271	b) 100 mm dia
1272	d) 50 mm dia
1273	Supply,Providing and fixing ofCI non-return valve (PN 1.0) as per relevant IS : 5312, swing type with natural rubber flap with flanges, Nut, bolts & washers, painting etc. complete as required.
1274	a) 150 mm dia
1275	b) 100 mm dia
1276	Supply,Providing and fixing electrically operated water flow switches (Vane type) including tamper switch and accessories, complete with tap off socket arrangement as required, with2 Nos. NO/ NC potential free contact.
1277	Supply, Installation, testing & commissioning of quartzoid bulb quick response type sprinklers K-115, of rating 68 degree C pendent with accessories as required . (UL listed / FM approved )
1278	a) i) Pendent type (68 deg.C) sprinkler, K - 115 quick response type
1279	b) Pendent Sprinkler(for kitchen)
1280	c) Side wall Sprinkler (Ramp Area)
1281	Drain valve
1282	Providing and fixing SS flexible sprinkler drop unbraided 20 mm NB UL listed having a working pressure of 12 kg/sq.cm complete with GI nipple, sprinkler fixing adaptor and fixing clamps complete as per Manufacturer\"s catalogue and decorative 65 mm dia CP brass/SS flange for fixing sprinkler below false ceiling
1283	20mm25MM x 800 /1000 mm long
1284	Providing & fixing dial type (100 mm dia) pressure gauge with isolation ball valve suitable for working pressure of 250 PSI. Cost shall be inclusive of providing any short pieces, nipples, elbows etc as required. (For Terrace floor)
1285	Air release valve complete with 25 mm dia. brass air valve (ball valve, pressure gauge type), 25 mm dia brass stop cock, nipple, tees, B46 elbow, pipe and all accessories as required including fixing brackets.
1286	Supply, installation testing and commissioning pressure switch assembly with interlocking of pumps (Make: Danfoss/indfoss/switzer/equivalent).
1287	Providing, installing and commissioning C.I. flanged \"Y\" type Strainer with SS mesh, suitable flanges, nuts, bolts, gaskets etc. complete (ISI). (Make: Kartar/Zoloto/Emerald/H-sarkar) 150 mm
1288	Supply and installation, testing and commissioningof Isolation Sluice valves tested to ISI marked ,PN 1.6 with CI body, bonnet & brass trim parts, & having necessary companion flanges, bolts, nuts, gasket packing and any other spares, includingindicator for open and shut position to be installed underground or above ground as per fire practice etc complete.(Make: Kartar/Winco/H-sarkar/Zoloto)150 mm dia.
1289	Supply,Installation ,Testing & Commissioning of 2 way Fire brigade connection. Make - Kartar
1290	Supply,Installation ,Testing & Commissioning of Air Release Valve 25mm NB with25mm dia Ball valve on inlet side and pressure gauge with isolating cock. Make - Kartar
1291	Supply,Installation ,Testing & Commissioning of Ball Valve 25mm dia
1292	15mm dia
1293	Supply, Installation, testing & commissioning of Installation control (Alarm) valve of cast iron body and brass/ bronze working parts comprising of water motor alarm, bronze seat clapper, and clapper arm, hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box ball valves, MS pipe of reqd. size, flanges, orifice plate, gasket etc. of size 150 mm dia as reqd.
1294	Supply, installation, testing and commissioningof Fire Brigade inlet connection with provision for Four female instantaneous coupling fabricated out of 150 mm dia. approved make heavy class MS pipe with one no. dual plate (Wafer Type) non-return valve, one no. Butter Fly valve (Bafer Type)for fire fighting system including making connection by providing necessary piping & fittings fire fighting wet riser, painting the same with 2 coats of enamel paint over a coat of Zinc Chromate primer all complete as per drawings, specifications.
1295	150 mm four way with Butterfly valve & NRV -01 no. each
1296	Supply,Installation ,Testing & Commissioning of SS hydrant valve /Landing valve of 63 mm NB size type-A Single headed ,Oblique type as per IS:5290/93 Make - Kartar/Equivalent
1297	Supply,Installation ,Testing & Commissioning of SS short branch pipe with 63 mm male inlet and 20 mm oulet nozzle as per IS:903 Make - Kartyar/Equivalent
1298	Supply,Installation ,Testing & Commissioning of ISI Marked RRL Fire hose pipe fitted with SS male & female coupling complete By GI wire binding size 63mm NB and 15mtr long each. Make - CRC/equivalent
1299	Supply,Installation ,Testing & Commissioning of MS hose box double door for RRL hose of suitable size to accommodate 2nos. Of 15mtr long fire hose and a branch pipe ,wall mounted type .
1300	Supply,Installation ,Testing & Commissioning of Swining patten wall fixing first aid hose reel made from MS sheet and waterways and moving parts with rubber hose of 19mtr mm dia. And 30mtr long with self closing tappering nozzle. Make - Kartar/Mitras
1301	Supply,Installation ,Testing & Commissioning of CI Butterfly valve as per IS:5321 with matching flange. Make - Kartar /Equivalent100mm NB
1302	D. INTERNAL HYDRANT PIPING
1303	Supply,Providing, fixing, jointing and testing in positionfor INTERNAL HYDRANT system following medium classMS pipes conformingto IS:1239 cut to required lengths including all necessary fittings (All fittings shall confirm to IS:1879 (part 1 to 10) and specials such as bends, tees, unions, Reducers,flanges & plugs etc.fixing at wall / ceiling level supported by clamps, hangers (using anchor fastners) etc, as per specification. Threading, jointing, and making proper connections, cutting hole in wall / floor / slab and making good the same. GI pipe sleeves suitable higher size shall be provided wherever the pipes are crossing the fire rated walls / floors slab and sealing the sleeves with glass wool in between and fire sealent compound at either end all as perConsultant / Employers\" requirement. All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwise and the supply of the same shall also be included in rates under this head. (NOTE: FITTINGS UP TO 50 MM SHALL BE HEAVY DUTY MS FORGED SOCKET WELDED & 65 MM AND ABOVE SHALL BE HEAVY DUTY BUT WELDED)
1304	150 mm dia
1305	80 mm dia
1306	25 mm dia
1307	Painting with two coats of Synthetic enamel paint of approved shade and brand over a coat of Red oxide zink chromate primer. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Includingpaintingoflegends and direction completed as per the approval of the Engineer- in- charge.
1308	150 mm dia
1309	80 mm dia
1310	25 mm dia
1311	Supply, installation, testing and commissioningof SS single headed hydrant valve as per IS: 5290 consisting of 63NB. single outlet flanged hydrants valve with instantaneous female plunger type coupling, chained blank cap including making flanged joints by providing necessary nuts, bolts, gaskets all complete as per specifications.
1312	Supply, installation, testing and commissioningof Providing & fixing swinging type First Aid hose reel in red colour drum with 30 mts long and 20 mm dia heavy duty rubber water hose, 20 mm dia ball valve, terminating with SS coupling&triple purposenozzleof 6mm outlet with shut off valve confirming to IS 8090 - 1976complete withMS socket for tap-off, drum and brackets (including painting) for fixing on wall with anchor fastener, bolts & nutsconforming to IS:884-1969 completeas required.
1313	Providing and placing in proper position Non-percolating flexible hose (RRL type-\"A\") ISI marked (IS:636) 63 mm dia x 15 M long complete with instantaneoustype SS- 63 mm dia. IS marked male and female couplings (IS:903) bound and riveted to hose pipe with copper rivets and 1.5 mm copper wire.
1314	Providing and placing in proper position SS 63mm dia short size branch pipes with 20 mm dia nozzles with 63mm instantaneous coupling ISI marked (IS: 903).
1315	Providing and fixing 5 mm thick glass door (with M.S. frame) of size 2100mm x 900mm with center opening for fire hose cabinet. Suitably marked on the outside with the letters \"FIRE HOSE\" including locking arrangement. All M.S. work to be in Red P.O. colour over appropriate primer.
1316	Providing & fixing dial type (100 mm dia) pressure gauge with isolation ball valve suitable for working pressure of 250 PSI. Cost shall be inclusive of providing any short pieces, nipples, elbows etc as required. (For Ground and Terrace floor)
1317	Air release valve complete with 25 mm dia brass air valve with ball valve, nipple, tees, elbow, pipe and all accessories as required.
1318	Providing and fixing EPDM butterfly valves, wafer type class PN 1.6 as per IS: 13095-1991 or BS: 5155, including necessary nuts, bolts, gaskets etc. complete (without gear box)
1319	150 mm dia
1320	Providing & Fixing of Dual plate (Wafer Type) Non return valves as per IS : 5312 (PN 1.6) swing check type with required flanges , nuts , bolts and gaskets etc.
1321	150 mm dia
1322	FIRE EXTINGUISHERS
1323	ISI Marked portable fire extinguisher, 4.5 kg CO2 type fire extinguishers complete in all respect including initial fill and wall suspension brackets & shall conform tolatestIS 15683 Make - Safex/equivalent
1324	Providing& fixing Water based Carbon-di-oxide 9 ltrs. fire extinguishers as per IS specification consisting of welded MS cylindrical body ,squeeze lever discharge valve fitted with internaldischarge tube ,30 cm long high pressure discharge hose ,discharge nozzle,suspension brackets,finished exteranally with red enemel paint and fixed to wall with brackets with rawl plug/dash fastners complete with initial charging.
1325	Providing& fixing ABC type(Dry powder type ) extinguishers. Including all accessories as per IS specification (IS :15683) Consisting of welded MS cylindrical body with discharge hose ,discharge valve ,suspension brackets,initial filling etc. complete as required., initial filling etc complete as required. Capacity - 6 kg
1326	MECHANICAL FOAM type extinguishers 9 ltrs capacity as oer IS specifications. For fire & plumbing pump room
1327	Trolly mounted co2 22.5 ltrs FOR DG ROOM, TRANSFORMER ROOM OR PUMP ROOM
1328	Trolly mounted mech foam 50 ltrs FOR DG ROOM, TRANSFORMER ROOM OR PUMP ROOM
1329	Supplying and installing at approved location approved make fire buckets (3 nos./set) of 24 gauge galvanized steel sheet, standard 9 litre capacity and of round bottom shape, painted white inside and black on the bottom, inscribed with letters \"\" FIRE\"\" in black and gold with dry clean fire sand. The scope shall also include the stand for mounting the sand bucket.
1330	Constructing Masonry chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement: 4 fine sand) for sluice valve, with C.I. surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design.
1331	Providing & fixing PFRC medium duty manhole cover with frame of 560 mm internal dia for valve chamber.
1332	F. SIGNAGES
1333	Supply and installation in position the \"FIRE EXIT\" Sign with luminicent colour having size 300 x 100 mm
1334	Supply and fixing in position the signages \" FIRE ORDER\" contain the following matter on 3 mm thick \"Opaque\" PVC foam board of computerised cut, PVC non-reflective self adhesive vinyle painted foam board of size 1200 x 1000 mm.
1335	ALERT THE SECURITY AT SECURITY ROOM BY ACTUATING MANUAL CALL POINT LOCATED AT STRATEGIC LOCATION.EVACUATE THE OCCUPANTS BY USING FIRE EXIT AND EMERGENCY EXITS ONLY AND ASSEMBLE AT ASSEMBLY POINTS.BE CALM AND DO NOT GET PANIC, WALK DO NOT RUN.IF POSSIBLE TRY TO EXTINGUISH FIREBY USING NEAREST / SUITABLE PORTABLE EXTINGUISHER OR WATER FROM NEAREST HOSE REEL/ HYDRANT VALVE.Supplying andinstalling of in position the following type of sign boards made out of 3mm thick \"Opaque\" PVC foam board with computer cut, PVC reflective self adhesive vinyle painted foam board, complete with mirror fasteners.
1336	Fire hose reel
1337	Lifts
1338	Fire extinguishers
1339	Analogue addressable Main fire alarm panel
1340	Sprinkler control valves
1341	MCP’s
1342	Exit with Left arrow
1343	Exit with Right arrow
1344	Emergency Exit
1345	Hydrant points
1346	No smoking
1347	Stair case indication with left arrow
1348	Stair case indication with Right arrow
1349	DO n\"t use lift incace of fire use stair
1350	Floor identification signage ( i.e., FIRST FLOOR …etc.) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm x 60cm.
1351	INTELLIGENT ADDRESSABLES FIRE ALARM SYSTEM
1352	Supply, Installation, Testing & Commissioning of UL listed / EN54 and FM approved Modular 10 Loop Analog Addressable Fire Alarm control panel having the capacity of 250 detectors or devices in any combination per loop. The panel shall have 32 bit Central processor with 5000 Event History logging with On Line & Offline reports and having large, 6\" (15.2 cm) (1200 -x- 800 pixel) color liquid-crystal display (LCD) with minimum 640 character, Touch Screen operation and LEDs for displaying system status. LCD Display status highlights Alarm events appear in red; Trouble events appear in yellow; Supervisory events in blue, and Security events in magenta, all this events shall saved as history file in non-volatile memory (EEPROM). The panel shall have the Fire Fighter Touch Screen Graphical Display panelto inform & guide Fire Fighter for carring out Fire Fighter operation. The display shall have Hazmat icons indicating the presence of explosive gas, liquids, poison,fumes etc stored on the floor. The panel shall have 12 Amps inbuilt power supply having charging capacity of maximum 100AH Lead Acid battery. In case of networking, the panel shall have network cardincluded inside the panel for RS485 communication with other display devices like Graphic screen, repeater panel etc. The panel shall be modular and shall have the capacity of expanding upto 10 Loops and 2500 detectors maximum. The panel shall support degrade mode operation (if no degraded mode than redundant CPU to be provided) and shall have battery backup of 24 hrs in normal condition and 60 minutes in Alarm condition. The panel shall support programmable relays for controlling lifts, staircase pressurizations fans, lift shaft and lift lobby pressurization fans, AHU\"s, ventilation fans, fire pump, monitoring of fire sprinkler and fire hydrant pump controlled by programmable logical equatoins. On the map, the user will see an icon indicating the location of the event in the building in addition to a \"You-Are-Here\" symbol to tell the responding person exactly where they are in the building in relation to the event. The Panel shall have 2 way communication Fire Fighter system. This shall include telephone circuit indication, fire fighter telephone jacks and main telephone handset.The panel shall be supplied with all accessories, power supplies in the required quantities as per site requirements for all types of field devices to make the system fully operational.The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. The system shall adhere to tender specification. (Notifier/Esser/Cerberus Pro/Simplex)
1353	Supply, Installation, Testing & Commissioning of UL Listed/ EN54 and FM approved Active Repeater Panel. The panel shall be able to give details of all fire and fault and Isolation conditions of addressable units of main Fire Alarm panel via the address codes. The panel shall have a LCD display and having maximum 160 (4 x 40) Characters in the display with system function keys like system reset, Alarm acknowledge, Alarm Silence, Trouble Acknowledge, internal buzzer etc. Repeater Panel shall have proper mountig back box and cable as required.(Notifier/Esser/Cerberus Pro/Simplex)
1354	Supply, Installation, Testing and Commissioning of UL 268 7th edition/EN54 and FM approved Intelligent AddressableMuliti Criteria detector with photoelectric, thermal, and false alarm resistance along with standard base. It shall be an intelligent digital photoelectric detector with a programmable and self testing function. The detector shall have tri color LEDwith 360° view. It shall have sensitivity of3.52-4.17% obs/ ft. It must have Polarity Insensitive, with built-in isolator and facility to mount in different comprehensive environment like Precious storage, Transformer rooms, Ware house and normal working environments. Superior electromagnetic interference (EMI) and radio-frequency interference (RFI) immunity. Including with all requried mounting accessories.Detector shall have in-built isolator for better reliability, circuit integrity and advanced fault finding. Manufacturers not having in-built Isolator feature in detector shall consider Isolator base in place of standard base OR separate Isolator before and after every detector to comply the same without any extra cost.(Notifier/Esser/Cerberus Pro/Simplex)
1355	Supply, Installation, Testing and Commissioning of UL 268 7th edition/EN54 and FM approved Intelligent AddressableMuliti Criteria detector with photoelectric, thermal, and false alarm resistance along with standard base. It shall be an intelligent digital photoelectric detector with a programmable and self testing function. The detector shall have tri color LEDwith 360° view. It shall have sensitivity of3.52-4.17% obs/ ft. It must have Polarity Insensitive, with built-in isolator and facility to mount in different comprehensive environment like Precious storage, Transformer rooms, Ware house and normal working environments. Superior electromagnetic interference (EMI) and radio-frequency interference (RFI) immunity. Including with all requried mounting accessories.Detector shall have in-built isolator for better reliability, circuit integrity and advanced fault finding. Manufacturers not having in-built Isolator feature in detector shall consider Isolator base in place of standard base OR separate Isolator before and after every detector to comply the same without any extra cost.(Notifier/Esser/Cerberus Pro/Simplex)
1356	Supply, Installation, Testing and Commissioning of UL 521 listed/ EN54 and FM approved Intelligent Addressable Heat detector along with standard base. The programmable heat detector shall work in condition of ROR (8.3 Degree/min) or Fixed Temp Application with seven (7) field-selectable settings in the 135° - 174°F (57.2° - 78.9°F) temperature range and can be configured to provide a low-temperature warning signal at 40°F (4.4°C).. The detector shall have tri color LED, Green for Normal, Amber /yellow for trouble and Red for alarmwith 360° view.It must have Polarity Insensitive, with built-in isolator, and false alarm resistance.Superior electromagnetic interference (EMI) and radio-frequency interference (RFI) immunity. The rate shall include other accessories to complete the installation of the Detector.Detector shall have in-built isolator for better reliability, circuit integrity and advanced fault finding. Manufacturers not having in-built Isolator feature in detector shall consider Isolator base in place of standard base OR separate Isolator before and after every detector to comply the same without any extra cost.(Notifier/Esser/Cerberus Pro/Simplex)
1357	Supply, Installation, Testing and Commissioning of UL 268 7th edition and FM approved Intelligent Addressable Smoke/optical detector with photoelectric and false alarm resistance along with standard base. The detector shall have tri color LED, Green for Normal, Amber/yellow for trouble and Red for alarmwith 360° view. Shall be Polarity Insensitive, facility to mount in different comprehensive environment like Hostile environment, Parking Garage, HVAC Ducts, Precious storage, Transformer rooms, Ware house, Dormitory and normal working environments, Detector shall have Automatic environment compensation feature. Superior electromagnetic interference (EMI) and radio-frequency interference (RFI) immunity.Detector shall have in-built isolator for better reliability, circuit integrity and advanced fault finding. Manufacturers not having in-built Isolator feature in detector shall consider Isolator base in place of standard base OR separate Isolator before and after every detector to comply the same without any extra cost. The rate shall include other accessories to complete the installation of the Detector.(Notifier/Esser/Cerberus Pro/Simplex)
1358	SITC of Main fire alarm control panel with addressable analogue fire detection & alarm type having capacity of 4 loops complete with all accessories & battery backup of 48hr in standby mode and 15min in alarm condition. The panel shall have 80 character display. All other specification will be followed as per direction of engineer in charge
1359	SITC of addressable repaeater panel to be connected with FACPthrough RS connector or optic fibre with all accessories & battery backup of 48hr in standby mode . All other specification will be followed as per direction of engineer in charge
1360	Supply, installation, testing & comisssioning of Common Detector Base for Addressable & Conventional Detectors (Certificated by LPCB)
1361	Supply, Installation, Testing and Commissioning of UL Listed /EN54 and FM approved Intelligent Addressable Manual Call Point Single Action with Built-in isolator. It has manufacturers prescribed matching red enamel outlet box. Polarity insensitive, Tri-color LED for status (Green for Normal, Amber for Trouble and RED for activation). The box should be red in colour and the word FIRE shall appear on the front of the stations in raised letters, 1.75 inches (44 mm) or larger. Manufacturers not having in-built Isolator feature shall provide separate Isolator before and after every MCP to comply the same without any extra cost.The rate shall include other accessories to complete the installation of the system.(Notifier/Esser/Cerberus Pro/Simplex)
1362	Supply, Installation, Testing and Commissioning of UL listed and FM approved Sounder cum Strobe. It shall have Code-3 Horn and Tone meet ANSI/NFPA temporal pattern for standard emergency evacuation signaling, 95dBA at 3mtr and field-selectable Candela settings atWall Mount - field selectable candela settings of 110cd. The rate shall include other accessories to complete the installation. (Notifier/Esser/Cerberus Pro/Simplex)
1363	SITC ofof audio visual strobe, complete with mounting box and accessories and module if required for all floor.(For ancillary building)
1364	Supply, Installation, Testing and Commissioning of UL864 listed /EN54 and FM approved Intelligent Addressable Single Input modules with built in dual isolator/ polarity insensitive and Advanced troubleshooting function. For monitoring purpose with Tri color LED for status (Green for Normal, Amber for Trouble and RED for activation). The Single - Input version are each designed to monitor a normallyopen (N.O) or (N.C) normally closed dry contact. Modules for monitoring status like flow Switch, Tamper Switch, Sprinklers and apartment fire alarm status.Manufacturers not having in-built Isolator feature shall provide separate Isolator before and after every Module to comply the same without any extra cost. The rate shall include other accessories to complete the installation of the system.For Flow switch/beam detector/monitoring third party etc.(Notifier/Esser/Cerberus Pro/Simplex)
1365	Supply, Installation, testing and commissioning of UL864 listed /EN54 and FM approved Intelligent Addressable Interface Single input + Single output Modules (for third party interface/devices) with built in dual isolator/ polarity insensitive and Advanced troubleshooting function. For monitoring purpose with Tri color LED for status (Green for Normal, Amber for Trouble and RED for activation). The Single - Input version are each designed to monitor a normallyopen (N.O) or (N.C) normally closed dry contact. Modules for activating hooters, over riding access door commands with all the mounting accessories complete as required. One CM shall provide one activation signals. Manufacturers not having in-built Isolator feature shall provide separate Isolator before and after every Module to comply the same without any extra cost. The rate shall include other accessories to complete the installation of the system. For Sounders/Strobe/Fire dampers/LIft/Access control etc.(Notifier/Esser/Cerberus Pro/Simplex)
1366	Supply, installation, testing & comisssioning ofFire Fighters Telephone Receiver
1367	Supply, Installation, Testing and commissioning of UL listed 2 way communication Fire Fighter\"s Telephone Jack between Remote Fire Fighter & Fire Command Center.Mounts to any standard single gang box (Notifier/Esser/Cerberus Pro/Simplex)
1368	Supply, installation, testing & comisssioning ofSupply and laying of 2 Core 1.5 sq.mm. copper armoured cable
1369	PUBLIC ANNOUNCEMENT SYSTEM
1370	Supply , Installation, testing , commissioningof Full range in-ceiling speaker, TRANSDUCER COMPLEMENTS 1 x 4\" dual cone woofer, SPL @ RATED POWER 95 dB @ 5 W, NOMINAL IMPEDANCE 8 Ohm, SENSITIVITY (1 w 1m) 88 dB (half space), FREQUENCY RESPONSE 150 Hz ~ 14 kHz (-3 dB), FREQUENCY RANGE 120 Hz ~ 16kHz (-10 dB) POWER HANDLING DIRECT MODE 10 W POWER TAPS @ 70V 0.3, 0.63, 1.25, 2.5 W POWER TAPS @ 100V 0.6, 1.25, 2.5, 5 W
1371	Supply , Installation, testing , commissioningof Wallmounting speaker, TRANSDUCER COMPLEMENTS: HF 1 x 0.5\" tweeter, TRANSDUCER COMPLEMENTS: LF, 1 x 4\" woofer, SPL @ RATED POWER 94 dB @ 5 W, NOMINAL IMPEDANCE 8 Ohm, SENSITIVITY (1 w 1m), 88 dB (half space), FREQUENCY RESPONSE 110 Hz ~ 20 kHz (-3 dB), FREQUENCY RANGE 90 Hz ~ 20 kHz (-10 dB), POWER HANDLING DIRECT MODE 20 W, POWER TAPS @ 70V2.5 W, POWER TAPS @ 100V 5 W
1372	Supply , Installation, testing , commissioningof the DigiPage Microphone Station comes in 8 zone versions. They are easy to use and combined with the DigiPage Wall Panel are often all a client needs to use in their day to day operations. Both the microphone stations are easily connected in a daisy chain format via CAT-5.
1373	Supply , Installation, testing , commissioningof Booster amplifier, AMPLIFIER CLASSClass AB, FREQUENCY RESPONSE40 Hz ~ 20 kHz, INPUT CONNECTIONS1 Female XLR, 1 Male XLR, POWER OUTPUT250 W (per channel), OUTPUTS4 x 6 Screw terminal strip, OUTPUT REGULATION, THD + NOISE< 0.5% (100 V, 1 kHz), SIGNAL TO NOISE RATIO> 88 dBA, INPUT SENSITIVITY150 mV,(Pot @ full) IMPEDANCE 20K,
1374	Supply , Installation, testing , commissioningof 1200 watt booster amplifier, FREQUENCY RESPONSE50Hz - 15kHz (± 3dB) into 100V, INPUT CONNECTIONSTransformer Balanced input with male and female XLR input/output sockets, POWER OUTPUT500 Watts RMS into 100 & 70 Volt line or 4 Ohms, OUTPUTS100 & 70 Volts or 4 Ohm speaker outputs via a rear panel barrier strip. Line out to feed additional power amplifiers available from 1 of the paralleled XLR inputs, CONTROLSFront Panel Power Switch, Recessed front panel input attenuator, PROTECTIONInternal Cooling Fan with temperature sensor, INDICATORAmplifier Status Display Window including: Power On LED; 10 segment LED output meter; Mains fail LED; High temp trip LED, SIGNAL TO NOISE RATIO-82dB, INPUT SENSITIVITYMax 300mV (set @ 1V), INPUT IMPEDANCE10 kOhm, THDLess than 0.5% @ 1kHz; Distortion at Max Power: 0.7%, DIMENSIONS (HxWxD) mm88 x 483 x 410, POWER SOURCEAC: 240V - 50Hz or 110V - 60Hz 3 pin IEC connector; DC: 24V with built in trickle charge circuit: 300ma maximum trickle charge 30 Amp maximum current draw on DC 300ma standby (idle) current draw on DC, POWER CONSUMPTION800 Watts (maximum).
1375	Supply , Installation, testing , commissioningof21 RU SPEED RACK (RACK DOOR, FRAME ASSEMBLY, SIDE COVER etc
1376	Supply , Installation, testing , commissioningof Voice Alarm Controller complete with all accessories
1377	DVD Player with USB Port along with interconnectiong cables & 16 GB Pen Drive
1378	Supply , Installation, testing , commissioningof Line Matching Transformer complete with all accessories
1379	Supply , Installation, testing , commissioningof Speaker cable in rigid PVC pipe/ Casing caping per running metre of cable used.
1380	Supply , Installation, testing , commissioningof CAT6 able in rigid PVC pipe/ Casing caping per running metre of cable used.
1381	Supplying, installing, testing and commissioning of6 Watt wall mounted speakers with built in line matching transformer, grill flush mounting type in side the utility rooms. (Make: Honeywell/Ahuja/Bosch/Ecler)
1382	Supplying, installing, testing and commissioning solid state Amplifier of 480 W RMS out put in rack, including necessary control wires, jocks etc. complete.Make: Honeywell/Ahuja/Bosch/Ecler)
1383	Supplying, installing, testing and commissioning of P.A. Console 8 zone shall expandable up to 60 zones , withpriority module micro processor based, mixing amplifier, with 6 zone for suitable selection module, power supply unit & goose neck micro phone and P.A. Call station of 8 zones with priority module micro processor based & goose neck micro phone etc shall be located in the reception / security for the announcement necessary communication cable/CAT 6 shall be considered form PA controller to call station etc. Make: Honeywell/Ahuja/Bosch/Ecler)
1384	Supplying, installing, testing and commissioning of 19\" Rack 650mm depth, 16U high amplifier rack assembly made of aluminum channel equivalent to euro rack system, with side and rear panels made of 14 swg powder coated sheet steel front transparent persplexdoor and with rails, rollers & bearings. Fans shall provided at the top for ventilation side panels will be ventilated type. The rack shall be powder coatedof approved color and spare \"U\" shall be covered with blank panels.
1385	Supplying, installing, testing and commissioning of speaker cable PVC insulated FRLS unarmored Cable with Accessories confirming to IS standards and specifications. The quoted rate shall includes ofAcrylic Fire stop Sealant in the opening for cablespassing throughfire compartment walls of RCC floors, masonry walls to provide up to 2 hours fire rating.(Make:Finolex/Polycab/Havells/KEI/equivalent)
1386	Supplying, installing, testing and commissioning approved make PVC FRLS conduits 20 mm dia on ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars, Bends etc. ISI marked
1387	Construction of Pumphouse, 50KLC Water sump & 25KLC Over head tank satisfying opwd specifications and complete with allsecondary Connections & standard safety accessorieswith reference to approved analysis as per direction of engineer in charge ( For ancillary building)
1388	BMS SYSTEM ( Supply & Installation)
1389	BAS SERVER - BMS ROOM
1390	Supply & Installation of BMS Server: Intel Xeon QuadCore processor , 32 GB RAM, 19\" LED monitor, 1 TB HDD SATA, Keybord and Mouse, LAN Card and USB ports.Form Factor - Tower;Windows Server 2016 OS,Windows Server- CAL5 license;Microsoft SQL Server
1391	BAS WORKSTATION - BMS ROOM
1392	Supply & Installation of Central Computer System -Intel Core i7 processor / latest generation processor, 16GB DDR3-RAM, 500 GB SATA Hard Disk,DVD Writer, Lan Card 10/100/1000 base-T,Optical Mouse, 104 Keys Keyboard, Windows 10 operating system.32\" LED Monitor,A4 Colour Inkjet Printer
1393	GRAPHICAL INTERFACE SOFTWARE
1394	Supply & Installation of BMS Software: BMS software shall be Web Based Graphical interface software based on MS Server / Windows 10 / Latest. The system should be accessible from anywhere on LAN or WAN or Ethernet without additional licenses or Software. The Communication protocol with the DDC, 3 Party Systems, etc. shall be Industry Standard open platform of BACNET / OPC / API [Vendor to specify if API is applicable]. System shall include 12000 data points and shall be scalable for expansion in the future by adding additional data points licenses. Software shall work in the WEB environment supporting HTML5 with min 5 concurrent client users license on LAN / WEB. The web interface should not require a plug-in in order to be displayed and must be compatible with all types of latest-generation web browsers including displaying on tablet , Mobile, etc. The software shall support system generated alarms with statistics of alarm types, notification via email, SMS, etc. Software shall be certified and complying to BACnet Advanced Operator Workstation standard ISO 16484-5 protocol version 1.13 or latest.
1395	Supply & Installation of Energy Management Software shall be part of proposed BMS software– The software shall display both real time and historical values. Displays in various views including Calendar, graphical and tabular, Line, Pie chart and bar chart. Based on the meter values hourly, daily, weekly and monthly consumption values shall be calculated and displayed. The software shall have facility to define alarms for certain consumption values. There shall be a comparative chart for definable periods for Energy analytics. Defined users shall be able to view the details through Desktop, Mobile or Ipad with auto adjust views based on the type of the device.
1396	USER LICENSE
1397	Supply & Installation of Minimum5 concurrent user License for the proposed BMS software. Defined users shall be able to view the details through Desktop, Mobile or Ipad with auto adjust views based on the type of the device.
1398	SUPERVISORY CONTROL UNIT
1399	Supply & Installation of Supervisory Controller for connecting the Software( PC ) to the DDC Controllers. Important Note: 1) Vendors to quote this item only if applicable to complete the system2) Vendors quoting for the following item shall provide one standby in the event the Supervisory Controller connected / managing the system fails. Standby controller shall be of capable of handling the project data points.
1400	Supply & Installation of NETWORK SWITCHES
1401	24 port unmanaged Non POE Network Switches in 4U wall mount rack
1402	24 port Loaded Patch Panel
1403	9U Wall mount Rack
1404	CAT6 Information outlet - Face plate and accessories
1405	Optic Fiber termination including Splicing, Fiber accessories
1406	CAT6 to OFC / OFC-CAT6 Media converters with necessary enclosures and Power supply
1407	Supply & Installation ofDDC CONTROLLERS
1408	DDC CONTROLLERS : DDC Controller with I/O module etc., The controllers shall only be NATIVE BACNET/IP based complying to BACnet standard ISO 16484-5 protocol version 1.13 or latest. The controller shall be with 32 bit microprocessor, working in standalone or networkable mode, with real time clock and historical database & Peer to Peer Communication. The DDC\"s shall store programs and program parameters in non-volatile memory. All DDC Controllers with necessary enclosure panels shall be provided with hinged doors with locking facility and back plate.[ Note: The selection of DDC controllershall be as per I/O schedule and the quantity of DDC controller shall be asmentionedbelow, no deviation shall be acceptable]
1409	Controller: 1 [GF]
1410	Controller: 2 [GF]
1411	Controller: 3 [GF]
1412	Controller: 4 [GF]
1413	Controller: 5 [GF]
1414	Controller: 6 [GF]
1415	Controller: 7 [GF]
1416	Controller: 8 [GF]
1417	Controller: 9 [GF]
1418	Controller - 10-18 [4F Terrace]
1419	Controller - 19 [4F Terrace]
1420	Controller - 20 [4F Terrace]
1421	Controller - 21 [4F Terrace]
1422	Controller - 22 [4F Terrace]
1423	Controller - 23 [4F Terrace]
1424	Controller - 24 [4F Terrace]
1425	Controller - 25 [4F Terrace]
1426	Controller - 26 [5F Terrace]
1427	Controller - 27 [5F Terrace]
1428	Controller - 28 [5F Terrace]
1429	Controller - 29 [5F Terrace]
1430	Controller - 30 [5F Terrace]
1431	Controller - 31 [5F Terrace]
1432	Controller - 32 [5F Terrace]
1433	Controller - 33 [5F Terrace]
1434	Controller - 34 [ROOF FLOOR]
1435	Controller - 35 [ROOF FLOOR]
1436	Controller - 36 [ROOF FLOOR]
1437	Controller - 37 [ROOF FLOOR]
1438	Controller - 38 [Site Level]
1439	Controller -39- STP Plant
1440	Controller - 40& 41[site Level & Terrace ]- PHE Plant
1441	Controller -42[BF]- Fire pumpsets
1442	Controller - 43-48 Electrical systems
1443	Controller - 43-54 Electrical systems
1444	Supply & Installation of FIELD DEVICES
1445	TemperatureSensors - Duct Mounted Type for supplyair temperature
1446	Duct type temperature sensor for measuring Supplyair temperature at the Air Handling Units (Range 45-150 deg. F)
1447	Immersion type temperature sensors with pockets of 200 mm length, made of Stainless Steel & with allaccessories ., for Chilled Water Application to measure CHW inlet & Outlet temperature for Chillers, Cooling Towers & AHU\"s, CSU\"s
1448	Return air CO2 Sensors - Duct Mounted Type
1449	Duct type CO2 sensor with a measuring range of 0-2000ppm
1450	Differential Pressure Switch to monitor Fan run status and Filter Status.
1451	Differntial Pressure Switch across fan to monitor the run status & across filters of AHU\"s/ DX Duxtable units/FA & EA Fans for measuring filter quality status as per technical specification in the document
1452	Duct Static Pressure sensor.Room Temperature sensor
1453	Room type temperature sensor for measuring Supply/Return air temperature inside Critical Rooms (Range 45-150 deg. F)
1454	Hydrogen Sensors
1455	Hydrogen sensor in the Battery room
1456	Ambient Temperature and RH sensor
1457	Ambient Temperature and RH sensor to measure outdoor Temp & RH.The sensor shall be with Radiation shield for Outdoor mounting
1458	Level switches
1459	Level switches shall be directly vessel mounted type with either top or side mounted as required.These shall be float type unless specified. Process connection shall be flanged - For High & Lowlevel Indications
1460	Level sensors
1461	Level sensors shall be directly vessel mounted type with either top or side mounted as required.These shall be float type unless specified. Process connection shall be flanged - For Water Tanks - For indicating different levels of tank.
1462	Flame Proof Level sensors
1463	Flame Proof Level sensors shall be directly vessel mounted type with either top or side mounted as required for measurement of levels in DG Tanks / Day Oil Tanks.These shall be float type unless specified. Process connection shall be flanged - For indicating different levels of tank.
1464	Liquid flow switches
1465	Liquid flow switches to monitor the flow
1466	Liquid DP switches
1467	Liquid DP switches to monitor the flow for Plumbing & Fire pumpsets monitoring etc
1468	Combined Temperature and RH Sensor
1469	Combined Temperature and RH Sensor with RH accuracy of 2% as per above specs mentioned individually (for ahu ,csu, dx units)
1470	Fuel flow sensor
1471	Fuel flow sensor to monitor the flow from bulk storage tank to day tank.
1472	Supply & Installation of INTEGRATOR FOR INTEGRATION OF FOLLOWING SYSTEMS ON BACNET / MODBUS-RTU
1473	Required Gateway / Open Protocol Software for integrating the following third party system communicating on one of the Standard Open Protocols such as BACNet , MODBUS, M-Bus, etc - Vendor to considered required No. of Integrators for qty\"s mentioned in IO summary
1474	HVAC SystemsCarrier/Toshiba/Eq amke
1475	Water Cooled Chiller Packages - 20 Data Points per Chiller Unit – 1 Nos.Air Cooled Chiller Packages - 20 Data Points per Chiller Unit – 2Nos.Variable Speed drive Logic Control Panel for secondary pumpsets with VFD - 10 data points per VFD –3 Nos.VFD\"s for AHU\"s -39 Nos. 10 data points/VFD in Modbus RTU.Chilled Water type FCU and Casette Units - 6 Data Points per Unit – FCU-11Nos & Cassette AC -61 Nos - Total - 66 Nos - Protocol:Modbus RTU / Bacnet/IP : ON/OFF Command & Status, Trip status , Room Temperature status.Integration OT Room Monitoring Station -11 Nos - 15 points in Modbus RTU.VRF Units- 18 Nos of IDU & 4 Nos of ODU-Total 22 Nos. 10 data points Per unit in Modbus RTU.Ventilation Panel- PLC Panel, 20 points each in Modbus RTU- 1 no\"s.Integration of Chiller Flow Meters- 3 Flow Meter.10 points each in Modbus RTU.
1476	Electrical Systems
1477	DG Integration - 20 No of Data Points per DG Unit – 2 Nos.Transformer 3rd Party integrations - 10 No of Data Points per DG Unit – 2 Nos.DG Sync Panel Integration -20 points each in Modbus RTU- 1NosUPS Integration- 4 Nos 20 points each in Modbus RTU.Battery Monitoring System- 4 no\"s. 10 points each in Modbus RTU.Energy Meters - 156 Nos;10 points each in Modbus RTU.Access Control Panel integration with BMS - 10 Access Door Controller and 5 attendance points controlled by 2 nos. active switch - 20 data Points per Switch each in Modbus RTU.Integration of APFCR - 10 points in BACNET/IP- 3nos.Integration of DG AMF Panel - 10 points in BACNET/IP-2 Nos.Integration of DG Fuel oil Meters- 6 points in BACNET/IP- 2Nos.Integration of Nurse Call System -117 Bed units and 21 toilet units and 9nos. Nurse Call room controller, controlled by 2nos. active switches.- 20 data Points per Switch each in Modbus RTU.Elevator Monitoring-10 points per elavator - 15 nos
1478	PHE Systems
1479	Integration of Water Meters - 5 Nos- 10 points in Modbus RTUIntegration of Heat Pump - 3 nos- 20 Data Points per Heat Pump STP PLC 3rd Party integrations- 25 Points in Modbus RTU- 1NoIntegration of STP Flow Meters- 5 Flow Meter.6 points each in Modbus RTU.Flushing Hydro Pneumatic Systems 3rd Party integrations. 10 points each in Modbus RTU- 2Nos.
1480	Fire systems.Integration of Fire Alarm Panel - 500 points in BACNET/IP.CONDUITING,WIRING AND CABLING
1481	Cables :
1482	Supply and Laying of Un Armored cables:
1483	2 Core 1.0 SQ. MM, GI unarmoured ATC conductor multistranded, Unscreened FRLS cable.
1484	4 Core 1.0 SQ. MM, GI unarmoured ATC conductor multistranded, Unscreened FRLS cable.
1485	2 Core 1.0 SQ. MM, GI unarmoured ATC conductor multistranded, screened FRLS cable.
1486	4 Core 1.0 SQ. MM, GI unarmoured ATC conductor multistranded, screened FRLS cable.
1487	2 Core 1.5 Sq.mm GI unarmoured twisted pair shielded FRLS cable for bus connection.
1488	Cat 6 UTP unarmoured cable
1489	Single mode 6 core unarmoured Optic Fiber cable
1490	PVC Conduit:
1491	25 mm FRLS PVC Conduit with all accessories
1492	GI Conduit:
1493	25 mm GI Conduit with all accessories
1494	CABLE TRAYS
1495	GI Perforated Cable Trays with Supporting brackets/structures WITH COVERS to enable running of cables in Shaft
1496	300mmx100mmx1.6mm
1497	150mmx50mmx1.6mm
1498	100mmx50mmx1.6mm
1499	ENGINEERING & COMMISSIONING OF ENTIRE BMS SYSTEM
1500	Engineering, Testing & Commissioning of BMS System including software integration of various systems such as Varaiable Frequency Drives , Fire Alarm System of Addressable Typeetc.,
1501	HVAC Work( Supply & Installtion)
1502	Supply, Installation, Testing & Commissioning & Handing over of the following:
1503	CHILLERS
1504	WATER COOLED SCREW CHILLER WITH VFD SUITABLE FOR CONSTANT PRIMARY FLOW & VARIABLE SECONDARY FLOW OPERATION(2 WORKING + 1 STANDBY)
1505	The unit shall povided withMulti Screw Compressors with factory fitted acoustical jackets for each compressor with single common cooler, suction valve, discharge valves,liquid line valves, slide valves for stepless capacity control, crank case heaters, pressure relief valves,Antifreeze cooling thermostat, electronic expansion valve for DX type coolers (shell and tube) and electronic flow control valve for flooded type cooler (shell and tube), chiller insulation with closed cell elasomteric insulating material, interconnecting piping, suction line insulation, safety controls,etc.,Microprocessor control panel suitable for automatic operationS incorporating all safety function as per equipment specifications & other points as listed below and as per technical specifications.
1506	The unit mounted / Free standing VFD-starter panel shall be supplied as an integral part of chiller supply and shall comprise IP-54 protection housing and suitable to reliable and study functioning in a plant room. The panel shall consist of power disconnecting switches with breakers,VFD-Starters for compressor motors, phase reversal protection, under/over voltage trip, single phase preventers, communication cardwhich can accept 4-20 mA or 2-10 Vdc analog signal. etc., for fully effective functioning of the chiller.In case of free standing VFD, starter panel shall be provided. Necessary Armoured Power & control cable cost from the VFD panel to the chiller, to be included in the scope of supply of chiller supply. VFD panel to have inbuilt ventilation fans with disconnect switch / MPCB.
1507	The Total Harmonic Distortion (THD) should be less than 5% as per IEEE 519- 1992 Harmonic Limits with passive and active filters.The unit shall be suitable for the HFC R-134a refrigerant & the cost shall be inclusive of necessary required refrigerant charge.The unit shall be provided with Microprocessor control panel suitable for automatic operation. It shall have display type panel for view of settings, operations & alarms.BMS integrator card with RS485 port with open protocol shall be BACnet and necessary software & hardware for third party BMS integration for the operation & monitoring of the entire chiller.Grooved Couplings (Victaulic)for Cooler inlet, outlet and Condenser inlet, outlet shall be supplied along with each chiller.The necessary water flow sensor / switch to be provided and interlinked with the chillers.All components shall be mounted on welded steel base frame, structural steel profiles/panels made out of galvanized sheet steel, protected with primary coat & finished with acrylic paint. Base frames shall meet the weather protection requirements forcoastal area.
1508	The chiller shall be supplied with the Anti-vibration spring type mounting as per the manufacturer\"s standard.Factory test of each equipment shall be carried out as per tender design conditions only at 4 points (90%, 70%, 50%, 35%).The Chiller should be of noise level not exceeding 80dba at 1.5 m distance from the equipment.The cost shall be inclusive of making necessary arrangements for factory visit by the client representatives to witness the factory performance test of one chiller before dispatch.The scope & cost shall include - ball brushing system for condensor coil for scaling and for better performance of condensor coil. This system should be inbuilt with the chiller product and all required sensors cabling & accessories to be included in the scope of supply & installation.
1509	Necessary Hardware/ Software like RS 232/ RS 485 port, universal protocol converter for thrid party BMS integration shall also be provided as an integral part of chiller supply. Communication protocol shall be Native BACNET / IP.Computerized selection for 100% and part load performance as per AHRI and as per actual site conditions (condenser relief and constant condenser entering temperature) shall be submitted along with the quote. Selection of chillers with constant condenser temperature shall also be submitted with the quote.Computerized selection for chillers shall be provided for the following scenerios for validation :1. without VFD2. with VFD3. with VFD and Harmonic Filters.Refer the the technical & tender specifications for further more details.The detailed break-up of the prices quoted indicating all the duties and taxes shall be provided. Also the currency conversion rates considered shall be indicated in the offer.
1510	Water-Cooled Screw Chillers of 250TR (2W+1S). Actual capacity as per the following design data;DESIGN PARAMETERS - WATER COOLED CHILLER WITH CENTRIFUGAL/SCREWCOMPRESSOR
1511	Compressors/ Motors/ Starters :Type - Hermetic or Semihermetic -Mono/Twin Screw compressors.Single or Twin refrigerant circuits.Voltage 415/415 + 10%, 3phase, 50 + 5% Hz.Refigerant- R407/R410a/R134a.First Charge of Refrigerant & lubricating oil.Pressure Drop in Condenser/Chiller not to exceed 1Kg/cm2. On water side.Noise level less than 78-82 dBA at 1.5mtr.
1512	EvaporatorsChilled Water in 12 deg.C(53.6 deg.F),Chilled Water out 7 deg.C(44.5 deg.F),Fouling factor (FPS):0.0001FPSUnit @ ARIwater flow rate (US GPM) 710.Tube material- Copper.CondensersCondenser water entering temperatures 32.0oC.Condenser water leaving temperatures 37.0oC.AT 4.5 DEG. CENT. WET BULB APPROACH.Fouling factor (FPS) - 0.00025FPS Unit.Tube material- Copper.IKW/TR - 0.67 max at design conditionControlsGauges, controls, control panels etc. whether specifically mentioned or not, microprocessor.based, compatible with Building ManagementSystem including protocol interface cards.
1513	Accessories :Taking delivery at port, clearance, loading, insurance transportation, unloading at site, lowering, Insurance of equipment at site till handing over of plants.Lifting to Terrrace from ground level and placement on the final location. (Import duty and other.official charges will be paid by the WMI).
1514	Note: Microprocessor based control panel shall be able to sequence the chiller operations as per the load condition and should be compatible withBuilding Mangement System ( B.M.S.) including BACNET over IP address , interface protocol cards.
1515	Microprocessor to control the following.1) Chilled water temperature indicators and PIDT control.2) Fault diagnosis.3) Auto/manual on/off facility with timer.4) Recording of hours of operation, No. of start etc.5) Automatic capacity control.The chiller shall be mouted on the spring isolators.The quoted price should also be inclusive ofVibration Isolators, Victolic Couplings,etc.,Please ensure necessary computer selection with model / catalogues is attached along with the Quote.(Computer Selection as per deisgn & ARI Conditions to be attached along with the Quote).
1516	Chiller and Compressor manufacturer should be from the same OEM
1517	Supply
1518	Unloading , Lifting , Shifting & postioning of chiller at Terrace level
1519	Testing, Installation & Commission
1520	FLOW SWITCH
1521	Flow switch suitable for 150 mm dia
1522	INTEGRATOR FOR VARIOUS CHILLER PACKAGES
1523	Supply & Installation of Integrator for transferring the data available on the chiller microprocessor panel to third party BMS for remote monitoring & operation.All the parameters available on the chiller microprocesser panel should be transferred to the BMS System supplied by Other Agency.It shall be possible to alter Set Point / Vary Current (Amps) / switch on / off of equipment as minimum paramters to BMS System in the points transferred to BMS System
1524	For Water CooledScrewChiller Packages - Supply
1525	Testing, Installation & Commission
1526	CHILLER PLANT MANAGER
1527	The plant manager shall be with necessary frame work and panel. The Panel shall be of IP 54 protection and suitable for indoor application.The construction of panel shall be with powder coated GI sheet. The casing & door shall be of 2mm & the gland plate shall be of 3mm thick. The minimum thickness of the supporting frame shall be of 3mm. The powder coating shall be Siemens grey.Chiller Plant Manager-Plant Manager to control chiller, sequence chiller based on efficient running, control of Primary variable pump sets, control of evaporator outlet valves with Modbus or Bacnet protocol, chilled waterwater temperature suitable for hooking to computer with wiringas per specifications ( 3 No. WC Chillers,3 nos primary pumps for WC Chillers, 3 Nos Condesor Water Pump sets, 3 No. of Cooling Tower, 3 Nos of Secondary pumpsets, Control Valves for chillers etc). All required integration ports/protocols to be made available for BMS integration.The control cabling & communication cabling to be included as part of supply installation testing & commissioning of chiller plant manager.
1528	Supply Testing, Installation & Commission.Supply, Installation, Testing & Commissioning & Handing over of the following:
1529	PART-B CENTRIFUGAL PUMPSETS& COOLING TOWERS
1530	PRIMARY WATERPUMPSETS - WC SCREW CHILLER 250 TR X 1 WITH IE2/IE3 -HIGH EFFICIENCY MOTOR
1531	All pumps should be with suction guide & FRP hood(Located in Terrace) ,other paramters as specified in the document
1532	Supply, installation, testing and commissioning of Horizontal End suction pumps. The installation of pumps shall be done by the contractor as per manufacturer recommendations. The pumps shall be mounted on concrete foundations with vibration isolators sandwitched between foundation and floor & complete as per site conditions, .The pumps should bewith Cast iron body,bronze impeller, 9.3 KW motor to deliver 600 USGPM against 15m head .Pump should be of minimum 85% Efficiencywith coupling, coupling gauard, outside mounted mechanical seal including SS 316 gland plate. The motor shall be of TEFC squirrel cage induction type, IP-55, class \"F\" insulation, IE2. The Cost shall include Supply & installation of Inertia block with spring isolators & frame suitable for pumpsets(2 Working + 1 Stand by)BMS compatible,
1533	SECONDARY PUMPSETS WITH VFD & LOGIC CONTROL PANEL WITH IE2/IE3 -HIGH EFFICIENCY MOTOR
1534	Supply, installation, testing and commissioning ofsecondaryVariableSpeedPumpingSystem,Horizontal End suction type. 1 No. dedicated microprocessor based pump controller housed all within the enclosure of one of the V.F.D, 2nos Differential Pressure sensor, with pumping software duly downloaded.The pumps should be with Cast iron body,bronze impeller, 18.5 KW motor to deliver 710 USGPM against 25 m head .Pump should be of minimum 85% Efficiencywith coupling, coupling gauard, outside mounted mechanical seal including SS 316 gland plate. The motor shall be of TEFC squirrel cage induction type, IP-55, class \"F\" insulation, IE2. The Cost shall include Supply & installation of Inertia block with spring isolators & frame suitable for pumpsets(2 Working + 1 Standby).Head Calculations to be shared along with the technical offer
1535	Logic Control Panel of Powder coated Sheet Steel enclosure complete with VFD for all Pumpsets (Logic Control Panel should have 4 VFD\"s ).Enclosure for the VFD with PLC should be in IP 55 enclosure.it should be compatible with open protocal communication port such as Modbus / Bacnet(panel shall be with 1 No. incoming feeder from main HVAC panel and 2 Nos outgoing feeders)-It should be with bypass starter
1536	1 Sets of DP transmitters / Sensor complete with installation hardware such as isolation valves, 5 way manifold, tubing, etc. with approx 100RMT of control cablingin 19mm dia GI Conduit
1537	CONDENSER WATER PUMPSETS WITH VFD- WC SCREW CHILLERSWITH IE3 -HIGH EFFICIENCY MOTOR
1538	Supply, installation, testing and commissioning of Horizontal End suction pumps. The installation of pumps shall be done by the contractor as per manufacturer recommendations. The pumps shall be mounted on concrete foundations with vibration isolators sandwitched between foundation and floor & complete as per site conditions, .The pumps should bewith Cast iron body,bronze impeller, 18.5 KW motor to deliver 825 USGPM against 22 m head .Pump should be of minimum 85% Efficiencywith coupling, coupling gauard, outside mounted mechanical seal including SS 316 gland plate. The motor shall be of TEFC squirrel cage induction type, IP-55, class \"F\" insulation, IE3. The Cost shall include Supply & installation of Inertia block with spring isolators & frame suitable for pumpsets.Kindly consider Pump insulation & cladding for Condensor pumpsets (2 Working + 1 Stand by). Head Calculations to be shared along with the technical offer
1539	Supply Testing, Installation & Commission
1540	INDUCED DRAFT COOLING TOWERS
1541	Cross Flow, Induced Draft, Vertical Discharge Type, Single cell, Cooling Tower complete with motor, fan, and other complete accessories as described in the technical specifications.It shall be designed with high efficiency drift eliminators etc. Recommended Capacity ofcooling Tower :- Suitable for 250 TR chiller capacity (2 Working + 1Standby).Each tower cell must be installed with individual cold water basins and water discharge sumps to facilitate maintenance without causing disruption to the other cells in operation.Vibration Isolators of spring open type designed to minimise any vibration from transmitting to other structures to be included in the scope of supply.Non combustible fiberglass towers having cross flow design, basin, PVC louver, drift eliminator, low noise fan, ladder, vibration isolators, nozzles TEFC squirrel cage type induction motor with IP 55 protection and class F insulationsuitable for chiller capacity offollowing TR.
1542	Cooling tower supplied should be of CTI /equivalent Certified. Necessary certificates should be attached along with Quote.Apart from CTI /equivalent certification, manufacturer should be responsible for thermal performance of each tower.Supply, Installaiton, testing and commissioning of FRP induced draft type coolingtower complete with FRP basin, FRP body, fan, distribution pipes, overflow pipe,ladder including foundationwith all connected accessorie, isolators etc. as per specifications and drawings. Water flow rate --825US GPM.Temp. Inlet --37.0º C.Temp.Outlet--32.0º C.Wet Bulb Temp.--27.7º CWET BULB APPROACH -- 4.3 DEG CEach Cooling Tower Complete with FRP casing , PVC/Polypropelen Nozzles.MS galvanised hardware, necessary direct driven axial flow fans complete with gear box .& electric motor . Make up water quantity not to exceed0.8% of circulation rate.Each Cell to have independent connection & common header.
1543	WATER BASIN - IN CONCRETE OR FRP CONSTRUCTION SUITABLE FOR COOLING TOWER with all necessary fittings,inlet /out let butter fly valves , quick fill valve ,low level senser etc.
1544	Supply, installation, testing and commissioning ofCooling towers with Twin cell CTI Certified, FRP/ Steel Induced draft, Cross flow, two side suction, belt driven, siteerectedcoolingtowerofcapacity as mentioned below based on the parameters givenbelow and completewithPVC Fills, Louvers , Drift Eliminators with flame spread rating of 5 as per ASTM E84,Louvers, Drift Eliminator, Weather Proof IP 55 TEAO Motor (IE2), Propeller Fan, FRP Basinin the bottom of the basin, Hot dip galvanised Steel Ladder, Perimeter handrail, Steel hardwareincluding nut, bolt, washer etc. For longer life of the product Hot dip galvanization on the steel frame, ladder other hardware shall be with minimum G-235.The cooling tower shall conformtotechnical specifications given in the tender. The maximum allowable sound power at any side of the cooling tower at a distance of 15 Mt for the cooling Tower shall be less than 65 dB at air inlet(Software selection to be submitted along with submital) . Tower fan motor shall be suitable for VFD operation and operation of VFD system shall be based approach of cooling tower. The Cooling tower shall have CTI Certification/ OSHA Certification.
1545	Recommended Capacity ofcooling Tower :- Suitable for 250 TR chiller capacityWater Temp. IN:-100 ° FWater Temp. OUT :-\"90° FRecommended Motor Rating:-2 No.7.5 HPMotor per cooling tower (Minimum Two Cells) or as per final selection sheetDrift Loss:-0.02%Total Water Loss:-0.71% (without bleed off)Evaporation Loss:-0.69%Cooling towers asdescribed Quantity includes one standby
1546	AUTOMATIC CONDENSOR WATER CHEMICAL DOSING SYSTEM
1547	AUTOMATIC CHEMICAL DOSING & BLOW DOWN SYSTEM FOR THE COOLING TOWER WATER
1548	The Automatic Chemical dosing system shall be with necessary chemical dosing pumps, chemicals, biocides, chemical tank, necessary valves, pipes, conductivity meters, logical control Electrical panel, internal wiring and other necessary items for the proper functioning of the system.The cost shall be inclusive of necessary GI & fire rated PVC pipe with necessary fittings, Necessary Isolation, Control, Non return Valves, Automated Blow down valves as required.The cost shall be inclusive of necessary panel internal wiring, wiring between panel and pumps, chemical dosing system, to any control valves etc.,The Logic control electrical panel shall be with all necessary MCB, contactors, relays, Logical controls, display board etc as required for the full automated functioning of the system.The system shall be with necessary Hardware & Software with open protocol like BACnet / Modbus for the necessary BMS monitoring of the system.
1549	The chemical dosing system shall be able to automatically collect sample and analyse and add necessary chemicals / biocides as required with controller. The dosing system shall also automatically perform the system blow-down as required by controlling the motorized valve of the blow-down pipe line.The system shall able to control the PH level, TDS, TSS, Micro kill residual, and corrosion resistance for MS and Copper etc.,Supply of the above detailed Automatic Chemical dosing / blowdown system(Location: Chiller Plant Room @ Terrace)Installation, Testing, Commissioning of the complete system. The costing shall be inclusive of 18 months of warranty from the date of commissioning and all necessary chemicals / biocides required for operating the system during the warranty period shall also be included.Supply, Installation, Testing & Commissioning & Handing over of the following:
1550	HVAC PLANT ROOM WORKS
1551	CHILLED WATER PIPING WORKSGeneral Note The scope includes :Supply, installation, testing, flushing, balancing and commissioning of entire condenser and chilled water piping network. Water Balancing shall be carried out 2 times and Flushing shall be carried out 3 times.
1552	CONDENSER SIDE
1553	CONDENSER WATER PIPING
1554	MS \"C\" Class pipes. Piping supports to be provided as mentioned in the specification. The piping flange connection bolts and nuts should be hot dipped galvanised. The cost shall be inclusive of pipe supports with MS Channels, angle frame with PUFsaddles. Fitting accessories for installation of pressure gauges, thermometers,BMS sensors drain ports to be provided by the HVAC contractor. Plastic sticker type Water flow directions to be marked on the condenser water lines. Only End flanges to be used for capping of pipes. \"Table E\" of BS code for flange thickness.Pipe dia below 150 mm shall be C Class confirming to IS:1239 (part 1) 2004,Pipe size between 200 mm to 350 mm dia shall be 6.35 mm & pipe dia above 350 mm shall be 8.0 mm confirming to IS:3589 Gr330.The non exposed condenser piping system shall be coated with 2 coats of primer and 2 coats of synthetic enamel paint. Color code as per IS standards. Prokon protective coating& UV Paint to be used for exposed piping with 2 layers of glass woven cloth asmechanical protection and UV protection.Opening and closing for all the condenser pipe entries in civil / gypsum / any type of partition shall be under scope of HVAC vendor and inclusive of cost. Routing diagram can be checked in drawing prior for quoting.
1555	250 mm dia
1556	200 mm dia
1557	150 mm dia
1558	100 mm dia
1559	80 mm dia
1560	Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the condensor water circulation as per specifications.
1561	BUTTERFLY VALVE
1562	BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- RingPN16 pressure ratingas specified.The Butterfly valve shall be of Slim seal wafer type of PN 16 rating, companion flanges shall also be of PN16 rating. Valve sizes 200mm and above shall be wheel operated type instead of handles. All bolts, washers and nuts shall be hot dipped galvanized only.
1563	200 mm dia
1564	150 mm dia
1565	80 mm dia
1566	MANUAL BALANCING VALVE
1567	BALANCING VALVE (Manual Type) - PN16 rating.Balancing valves installed for the chilled water pipelines shall be insulated with 25mm thick nitrile rubber insulationThe valve should be with factory calibrated with +/- 5% flow accuracy. Provided with necessary measuring port, drain port, flanges hot dipped galvanized bolts, washers and nuts etc.,The balancing to be done by portable hand held device and same result should be furnished in the handing over manual.The rate quoted shall include the cost of the water balancing through automated tools supplied by the valve manufacturer. The size of the valve indicated below are provisional and shall be confirmed by the manufacturer / tenderer.
1568	200 mm dia
1569	NON RETURN VALVE
1570	NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end & PN-16 pressure rating as specified.The Check valve shall be of Slim seal wafer type of Dual plate type with companion PN16 flanges & insulation.all bolts, nuts and washers shall be of Hot dipped galvanished.
1571	200mm dia
1572	MOTORIZED BUTTERFLY ON/OFF VALVES
1573	Supplying, fixing, testing and commissioning of following sizes Motorized Butter fly Valve with CI Body, SS Disc,O ring and minimum PN-16 pressure rating, conforming to BS 5155, IS 13095, with IP-55 actuator, capable of accepting upto 10V DC, and upto 20mA electric signal and providing similar transduced feedback output to control system as required. Globe valve type with heavy duty actuator suitable for 220V AC operation, step down transformer. The valve actuator shall be of spring return type to ensure that the valve closes when the power supply is cut-off to the actuator. The actuator shall be electrically interlocked with the respective equipment such that the power is automatically supplied to the actuator when the equipment is switched ON and the power is cut-off when the equipment is switched OFF.
1574	200mm dia
1575	150mm dia
1576	Y\"-STRAINER
1577	The Y-strainer of Ductile CI body flanged endsconstruction shall be with stainless steelstrainer for chilled / hot water circulation including insulation as specified.shall be of bronze with magnet and drain port.
1578	200mm dia
1579	DRAIN VALVES
1580	25 mm dia Ball Valve
1581	FLEXIBLE RUBBER BELLOWS
1582	Flexible rubber couplings for Chiller and Condenser water piping connections with expansion stoppers with double folds, hot dipped galvanized bolts and nuts. The bellows should withstand pressure of 16kg/cm2. ( PN 16) at the Inlet & Outlet of Pumps & Chillers
1583	200mm Dia.
1584	AUTOMATIC AIR VENT.
1585	Automatic air vent to be provided at all high location of piping. The air vent to be provided with necessary ball valve. 25/32 dia
1586	THERMOMETER (TEMPERATURE GUAGES)
1587	The Thermometer shall be of Dial type (100mm)Range 0° to 50°C, with stainless steel body - IP 55 protection, with necessary theromowells.
1588	THERMOWELL PROVISION
1589	Thermowell with the length of 3/4th of the pipe dia.
1590	TEST POINT
1591	Supply Installation testing and commissioning of test points for measuring chilled water pressure and temp.Test Point shall be of brass construction, 1/4\" BSP with NEOPRENE sealing bushes and shall beprovided with screwed cover.
1592	TEST POINT MEASURING INSTRUMENT
1593	supply & installation of dial type pressure & Temperature gauge with extended probe used for taking pressure & temperature measurements in liquid flow lines carring non-corrisive fluids using portable instruments made out of brass body & connection size of 1/4\".
1594	PRESSURE GAUGE (GLYCERINE FILLED)
1595	The Pressure Gauge shall be ofBourdon tube Dial type (100mm) Range 0 to 10 kg/cm², with stainless steel body - IP55 protection with necessary pipe fitting and needle valve etc.,
1596	MAKE UP WATER PIPE
1597	Makeup water line shall be in GI Pipe and non-return isolation valve to be fitted to the supply water line. The mains pressure range shall be 100 kPa to 150 kPa. Necessary Pressure Regulating Valve & Over flow to be considered for the same.
1598	100mm. Dia.
1599	80mm. Dia.
1600	CHILLED WATER SIDE
1601	CHILLED WATER PIPING WITH INSULATION AND ALLIED WORKS IN AC PLANT ROOM WORKS
1602	Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled/Hot water piping inside the building (with necessary clamps, vibration isolators ,bends, tees, reducers, flanges etc. and including MS supports with C-channel/ L-angle and U-clamps, anti-vibrationand fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / m3 density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class ‘O’ insulation applied by suitable adhesive complete including repairing of damage to building etc. as per specifications and as required complete in all respect.Note:-The Pipes of sizes 150 mm & below shall be M.S. \"C\" class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.
1603	Fitting accessories for installation of pressure gauges, thermometers, BMS sensors,drain ports to be provided by the HVAC low sidecontractor. Fluorescent Plastic Sticker/ paint shall be applied to indicate Water flow directions. Only End flanges to be used for capping of pipes.\"Table E\" of BS code for flange thickness to be adhered.Opening and closing for all the chiller pipe en`tries in civil / gypsum / any type of partition shall be under scope of HVAC vendor and inclusive of cost. Routing diagram can` be checked in drawing prior for quoting.Supply , Installation, Testing & Commissioning of be`low mentioned sizes
1604	250 mm dia MS Pipes (32mm Insulation)
1605	200 mm dia MS Pipes (32mm Insulation)
1606	150 mm dia MS Pipes (32mm Insulation)
1607	125 mm dia MS Pipes (32mm Insulation)
1608	80 mm dia MS Pipes (32mm Insulation)
1609	50 mm dia MS Pipes (32mm Insulation)
1610	40 mm dia MS Pipes (32mm Insulation)
1611	Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications
1612	BUTTERFLY VALVE WITH INSULATION
1613	The BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN-16 pressure rating for chilled water/hot water circulation as specified, companion flanges shall also be of PN16 rating. Butterfly valves installed for the chilled water pipelines shall be insulated with nitrile rubber insulation and the insulation thickness shall be similar to that of the pipe dimensions. (valve sizes above 200mm shall be wheel operated type instead of handles). All bolts, washers and nuts shall be hot dipped galvanized only.
1614	250 mm dia
1615	200 mm dia
1616	150 mm dia
1617	MANUAL BALANCING VALVE WITH INSULATION
1618	BALANCING VALVE (Manual Type) - PN16 rating. BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN-16 pressure rating for chilled / hot water circulation as specified.Balancing valves installed for the chilled water pipelines shall be insulated with 25mm thick nitrile rubber insulationThe valve should be with factory calibrated with +/- 5% flow accuracy. Provided with necessary measuring port, drain port, flanges hot dipped galvanized bolts, washers and nuts etc.,The balancing to be done by portable hand held device and same result should be furnished in the handing over manual.The rate quoted shall include the cost of the water balancing through automated tools supplied by the valve manufacturer. The size of the valve indicated below are provisional and shall be confirmed by the manufacturer / tenderer.
1619	150 mm dia
1620	MOTORIZED BUTTERFLY VALVE (ON- OFF Type) WITH INSULATION
1621	Globe valve type with heavy duty actuator suitable for 220V AC operation, step down transformer. The valve actuator shall be of spring return type to ensure that the valve closes when the power supply is cut-off to the actuator. The actuator shall be electrically interlocked with the respective equipment such that the power is automatically supplied to the actuator when the equipment is switched ON and the power is cut-off when the equipment is switched OFF.The valve shall be insulated with nitrile rubber insulation of thickness similar to that of pipe sizes. Supply,installation,testing and commissioning of following Motorised Butterfly Valve, BMS compatible with actuator/linkage/accessories etc. (2 -way on/off type with status feedback) as per the manufacturer\"s specifications & as directed by Engineer-in-charge.
1622	150 mm dia
1623	DRAIN VALVES
1624	Supply, installation, testing and commissioning of the following Drain Valves(full way) of gunmetal construction duly insulated as per specifications and drawings.25 mm dia Ball Valve for Y-Strainer for Pump sets & piping
1625	25 mm dia Ball Valve for Y-Strainer for Pump sets & piping
1626	SUCTION GUIDE
1627	Supply, installation, testing & commissioning of approved make Suction Guide for pump sets .Supply , Installation, Testing & Commissioning of below mentioned sizes
1628	200 mm dia
1629	150 mm dia
1630	FLEXIBLE RUBBER BELLOWS
1631	Flexible rubber couplings for Chiller and Condenser water piping connections with expansion stoppers with double folds, hot dipped galvanized bolts and nuts. The bellows should withstand pressure of 16kg/cm2. ( PN 16) at the Inlet & Outlet of Pumps & Chillers
1632	200mm dia
1633	150mm dia
1634	NON RETURN VALVE/FLOWTREX VALVE WITH INSULATION
1635	NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end & PN-16 pressure rating for chilled / hot water circulation including insulation as specified.
1636	200 mm dia
1637	150 mm dia
1638	AUTOMATIC AIR VENT.
1639	Automatic air vent to be provided at all high location of piping. The air vent to be provided with necessary ball valve.
1640	THERMOMETER (TEMPERATURE GUAGES)
1641	The Thermometer shall be of Dial type (100mm)Range 0° to 50°C, with stainless steel body - IP 55 protection, with necessary thermowell\"s.
1642	THERMOWELL PROVISION
1643	Thermowell with the length of 3/4th of the pipe dia.
1644	TEST POINT
1645	Supply Installation testing and commissioning of test points for measuring chilled water pressure and temp.Test Point shall be of brass construction, 1/4\" BSP with NEOPRENE sealing bushes and shall beprovided with screwed cover.
1646	TEST POINT MEASURING INSTRUMENT
1647	Supply & installation of dial type pressure & Temperature gauge with extended probe used for taking pressure & temperature measurements in liquid flow lines carrying non-corrosive fluids using portable instruments made out of brass body & connection size of 1/4\".
1648	PRESSURE GAUGE (GLYCERINE FILLED)
1649	The Pressure Gauge shall be ofBourdon tube Dial type (100mm) Range 0 to 10 kg/cm², with stainless steel body - IP55 protection with necessary pipe fitting and needle valve etc.,
1650	DRAIN VALVE WITH EXTENDED STEM
1651	Drain valve
1652	32 mm dia
1653	25 mm dia
1654	MAKE UP WATER PIPE
1655	Makeup water line shall be in GI Pipe and non-return isolation valve to be fitted to the supply water line. The mains pressure range shall be 100 kPa to 150 kPa. Necessary Pressure Regulating Valve & Over flow to be considered for the same.
1656	50mm. Dia.
1657	25mm. Dia.
1658	CLOSED LOOP WATER EXPANSION TANK
1659	Supply, installation, testing & commissioning of Closed loop Water Expansion Tank of MS construction with interchangeable EPDM Butyl rubber membrane bladder complete with 25mm thick SE quality expanded polystyrene insulation, set in a frame work of treated teak wood and finished with 20G aluminum sheet duly powder coated to match external elevation.Tank to be minimum 1000 Liters capacity and tank shall be mounted on FRP coated steel stands.The tank shall have 50mm system connection and 40mm drain and over flow and 40mm quick fill and makeup connection, provision for pressure gauge and switches etc.Tank shall be insulated as per specifications and provided with pressure switches. The expansion tank shall be supplied and installed with all accessories required for proper functioning of the system.Tank shall be complete with Pumps required in the configuration of N + 1 (1 working + 1 Stand By).The cost shall include necessary valve package & control logic panel
1660	Supply
1661	Testing, Installation & Commission
1662	AIR SEPERATOR
1663	Supply, installation, testing & commissioning of Air Separator with insulation - 500mm dia
1664	Supply
1665	Testing, Installation & Commission
1666	FLOWMETERS FOR CHILLERS
1667	Ultrasonic Water Flow meter- The flow meter shall be bidirectional suitable for measuring the water flow in a 200mm dia CHW pipeline by means of a SS belt around the pipe line. The meter shall have a local display of 2 lines 16 characters LCD and a 4-20mA signal output and accuracy of +/- 1% of reading @ rate > 0.5m/sec.The display shall have a keypad lock option for security. Flow meter to be compatible to BMS system.Note: Installation of the flow meter on the CHW Pipeline shall be in HVAC contractor scope. The scope shall include removal of cladding, piping insulation, fixing of flow meter along with transducer cable and providing new insulation to pipework with cladding ensuring proper finish. Commissioning and integrating the flow meter in to the BMS shall be in BMS vendor scope.Supply , Installation, Testing & Commissioning of below mentioned sizes.
1668	150 mm dia
1669	Supply & Installation of Purge/Drain valve for Chilled water Piping.Supply , Installation, Testing & Commissioning of below mentioned sizes
1670	12mm dia
1671	SUB TOTAL-A CHILLED WATER PIPING WORKSCHILLED WATER PIPING ALLIED WORKS MILD STEEL SUPPORTSSupply, installation of Steel Supports for various purposes in supporting system.( for supporting piping works)
1672	SupplyTesting, Installation & Commission
1673	Flushingof chilledwaterpipingto achieverequiredwater quality(as per Chillermanufacturerrecommendation) with required water & chemicals .
1674	Supply, Installation, Testing & Commissioning & Handing over of the following:
1675	PART D -AC UNITS
1676	AIR HANDLING UNITS FOR OPERATION THEATRES - GF, 3F
1677	Double Decker unit housing supply air fan, cooling coil, electrical resistance heater strips, provision for humidifier section, motorized fresh air dampers,along with inlet plenum section at lower deck. At upper deck, the unit shall consist of exhaust fan, motorized exhaust damper and motorized return air damper with mixing box.Supply, Installation, testing and commissioning of double skin floor mounted air handling units.EPDM gaskets and stainless steel screws are only to be usedfor fastening the panels. The AHU shall be consisting of fan section and the fan shall be only Aero-foil design backward curve plug type with non-overloading type blades.( to have lower noise level from the unit). , the fan outlet velocity shall be in the range of 8 to 8.5 mtrs.,/sec. maximum. Coil section with Cooling coil shall have copper tubes of wall thickness not less than 0.40mm with minimum 0.15mm thick hydrophobiccoated aluminium fins firmly bonded to copper tubes and mounted in stainless steel end plates. Cooling coil should be with mist arrestor and empty chamber on delivery side and all hygiene unit shall be fitted with UVC lamp on the coil section.Wherever dual cooling coil systems have been provided, (Chilled water coil +DX type coil) necessary full proof interlocking shall be included in such a way that either DX coil or chilled water coil system shall be operated to meet the indoor temperature and both systems should not be simultaneously operated.
1678	The header in the coil section shall be copper only. Design air velocity across the cooling coil shall not exceed 2.4m/sec.and each unit shall have a double skin Stainless drain pan.Coil shall be tested for 20 bar working pressure.Each coil shall have an automatic air vent with isolating valve discharging into drain pan through PVC flexible.Drain pan shall be of stainless steel of thickness not less than 1.2mm and of grade not less than SS 304 of minimum 100mm high. Filter section with MERV 14 & Pre Filter (EU-3) filters & HEPA Filters at terminal station, spring type of vibration isolators, Limit switch, bulk head in floor mounted AHU etc., complete as per specifications and drawing for the following capacities: Wiring for Bulk Head & limit switch from starter panel to AHU will be measured seperately.The AHU Should be provided with Face & Bypass Damper as detailed in specification including necessary actuator which needs to be part of AHU Supply. The AHU shall be configured with 2 tier arrangement for supply air fan and exhuast/return air fan mounted in a single cabinet section, Incase of defumigation cycle Return air fan shall be running on full speed to act as an 100% exhaust; during this time supply air fan needs to be operating at 50% of total fan capacity.Cost shall include 2 sets of spare filters(Pre &, Fine filters as per respective Size) apart from main filter with AHU. Quantity of spare filters shall be 4 sets for 16 Number of AHU\"s.The capacities and other details of the AHUs required are given in the following order:
1679	Fanand motor with Class F insulation- Unit must be provided with direct drive backward curved fans each running with DC drive Electronically Communicated motors, the fans should be aligned and balance statically and dynamically. The fan speed must be controlled based on the room return air temperatures and also must have automatic speed control without manual intervention.The fans can be in multiple numbers as per the manufacturer’s standard which shall also ensure redundancy. Units with latest innovative EC fan technology with “COMPOSITE “Blade material will be preferred. Composite blade EC fan saves more energy compared to Standard EC fan with aluminum blade. Units shall be factory balanced in accordance with Section 15071, Mechanical Sound and Vibration Control. TThe Motor should be IE4 equivalent, with seamless speed controller and integrated controller for temperature management via return air. The motor should be IP54 protection class, with Thermal class 155.. The impellers shall be corrosion resistant.
1680	Temperature and humidity controller inside the individual Operation theatres shall be considered for each OT AHU.The unit shall be suitable for outdoor application with necessary weather hood, canopy and supports with necessary MS channels & threaded rods.Cost shall be inclusive of non-cloth type canvas connection made of self extinguishing, moisture resistant flexible fabric to be provided between AHU outlet flange and the supply duct / plenum.The AHU to be selected that the noise level not to exceed 60 dBA at 1.5meter distance from the AHU cabinet in all directions.The AHUs shall be as per the list mentioned below. For the detail of the type of the AHU refer the schematic GA drawing of each type. For other technical details, refer the AHU schedule.The variable frequency drive shall also be the part of the contract.VFD shall be supplied with IP 21Protection.The price shall also include the cost of VFD with all relevant accessories as specified in the document. The construction of the fan motor shall be of IP 21.The VFD shall be capable of regulating the speed of the AHU fan from 120 % to 20% of rated AHU fan speed at the specifed rated flow & static.The VFD shall be capable of hooking to the BMS system
1681	VFD should be supplied with Communication Card to transfer the necessary information from VFD to BMS System.All Hardware & Software required for integration should be part of scope.Supply, Installation, Testing and Commissioning of Ultra Violet Germicidal Irradiations, (UVGI) System to be installed inside the AHU for Improvement of Indoor Air Quality and/orEnergy Saving ( when installed inside the AHU\"s) as per Specifications. The Average Life of UV lamps Shall be 12000hrs. The UVGI System shall consist of UV lamps, parabolic reflector (Reflector only incase of AHU mounting) with its mounting assembly and control panel. The Control Panel shall be mounted outside the AHU and should Consist ofballast, hour meter, MCB (or disconnect switch), Indicating Light. The Prices to include inter connected wiring (UV resistant) between the UVGI lamps and its panel.
1682	UV lamp shall be fabricated out of special high transmission Quartz Glass and of the high output, hot cathode, T5 (15mm) diameter and They shall produce 95% of their energy at 254 nm. UV lamp shall not produce ozone or other secondary contamination and to substantiate this the lamps shall be tested by an approved Indian lab for output performance of 254 nm. Lamp manufacturer to submit the certificate from this lab. The lamp shall be high output type and should not be lower than 800 mA.The UV intensity of each lamp shall be 800µW/cm² when measured at a horizontal distance of 10 inches from the lamp. Any company offering to supply Ultraviolet Germicidal Irradiation (UVGI) System must have a minimum experience of 50 months in supplying and implementing installations meeting these specifications. The ballast shall only be installed in a control panel and not inside the reflector assembly itself. The system shall also include prices for spare lamps for one replacement after 12000 hrs. of initial supply. The number of lamps in an UVGI System shall be calculated to ensure the minimum wattage as per selection chart based on 4016 microwatt. sec /cm2 dosage over 4 air changes.The HVAC contactor shall submit the Coil Size and CFM for AHU mounted application and Duct size with CFM for Duct mounted application. The length of straight duct should be provided by the HVAC Contractor at site.
1683	ELECTRIC STRIP HEATERS ALONG WITH PANELS
1684	Tubular Strip heaters with safety thermostats, The Electrical panel for heaters shall comprise incoming MCCB, individual contactor for each bank of heaters, potential free contacts, interlocks with CSU starter and safety thermostat, phase indicators, ON,OFF, TRIP indicators for each bank of heaters, Digital Ammeter & Voltmeter with selector switches, Auto-OFF-Manual selector switch, Earth leakage relays etc., The panels shall be with necessary provisions and potential free contacts for control & monitoring from the third party BMS system. The cost shall be inclusive of necessary hardware for integration to the third party BMS.Supply Air StreamFilter Sections consisting of prefilter, microvee Filters.Fan section with PLUG Fan, blower motor, drive, volume control damper and duct flexible connection.8 row deep cooling coil (minimum).Electrical Strip heaters.Suitable VFD for fan motor.Discharge plenum section.
1685	Return / Exhaust Air Stream Fan section with airfoil blower, motor & drive, volume control damper direct, flexible connection.Suitable VFD for fan motor.Pre filter section with frame work & filters.Mixing Box comprising of damper & filter section.Coil shall be selected for maximum air velocity of 500 ft/minute & face velocity across pre-filters at 500 ft/minute.The AHU shall be capable of delivering Total static pressure of minimum 115 mm W.G for supply air stream fan and minimum 35mm for exhaust air stream fan. The total static pressure required shall be calculated at the time of bidding.Internal return air motorized damper shall be provided.AHU shall be with 46+/-2mm thick puf panel with0.63 & 0.83 mm sheet thickness.AHU Fan outlet velocity should be between 8 to 8.5 m/sec.
1686	The quoted price shall also include modulatingmotorised Damper with actuator, at outlet ;inlet & return duct. flexible connection at outlet, inlet & return, Room pressure monitor with highly accurate capacitance sensing technology to measure and display true low pressure differential. Price shall also be inclusive of all components described above to make unit complete in all respects. The air moving capacities at high speed shall be as follows:
1687	Air moving capacity shall be as follows:Equipment Description
1688	GF-OT-AHU-0111.5TR, 4300 CFM, Supply Air fan - TSP - 115 mm, Return Air Fan TSP - 50mm
1689	Floor mounted Double Skin Air handling Unit construction with PUF Sandwich Panels at a static pressure of 115 mm WG complete with backward curved blower, TEFC blower motor suitable for operation on 415 V +/- 10%, 3Phase, 50 Hz, A.C. Supply complete with 6 Rows copper tube,Filter section with pre Filter ,Fine Filter, Terminal Hepa Filter(Filter section with MERV 8 & MERV-14 filters)with 1 set of spare & 1 set of commissioning Pre-filter apart from one assembled in the AHU. Mixing Box complete with drain connections with anti-vibration mounting, Inlet Plenum Section as mentioned in the technical specifications. Capacity : AHU Chilled water Type,11.5 TR 4300 CFM with supply air motor 5.5KW with 115 mm WG Static pressure and return air fan with 3350 cfm with return air motor 3.7KW with 50mm WG Static pressure with Fresh air Quantity of 950 cfm with 8 Row Deep Cooling Coil with 10 number of fins/inch, for Operation Theatre,9 KW Heater Bank/Electrical Heat Stripper for humidity control. Display sensor with remote control should be provided. The AHU shall be configured with 2 tier arrangement for supply air fan and exhaust/return air fan mounted in a single cabinet section. Scope shall also includes for additional spare Filters each AHU\"s.
1690	Supply of Air Handling Unit with Aluminum ducting with acoustic & Thermal installation (along with provisions for fresh air) and fabrication with specifications 24/22 gauge. Supply, installation and testing of multi-blade type louver dampers of aluminum for ducts coolers to be provided with suitable links, levers and quadrants for manual control of volume of air flow and for proper balancing of the air distribution system.
1691	Supply & Installation of11.5TR-4300CFM-Floor Mounted AHU complete with all sections as specified in technical specifications
1692	Installation & Commissioning of all items listed above
1693	Supply & Installationof VFD which needs to be installed in the starter panel supplied by electrical contractor The Communication card to transfer the entire data available on VFD to the BMS System.VFD shall be Danfoss/ ABB /SIEMENS /EMERSION HVAC SERIES
1694	5.5KW
1695	3.7KW
1696	UV Lamp for AHU
1697	GF-OT-AHU-0214TR, 4850 CFM, Supply Air fan - TSP - 115 mm, Return Air Fan TSP - 50mm
1698	Floor mounted Double Skin Air handling Unit construction with PUF Sandwich Panels at a static pressure of 115 mm WG complete with backward curved blower, TEFC blower motor suitable for operation on 415 V +/- 10%, 3Phase, 50 Hz, A.C. Supply complete with 6 Rows copper tube,Filter section with pre Filter ,Fine Filter, Terminal Hepa Filter(Filter section with MERV 8 & MERV-14 filters)with 1 set of spare & 1 set of commissioning Pre-filter apart from one assembled in the AHU. Mixing Box complete with drain connections with anti-vibration mounting, Inlet Plenum Section as mentioned in the technical specifications. Capacity : AHU Chilled water Type,14 TR 4850 CFM with supply air motor 5.5KW with 115 mm WG Static pressure and return air fan with 3700 cfm with return air motor 3.7KW with 50mm WG Static pressure with Fresh air Quantity of 1150 cfm with 8 Row Deep Cooling Coil with 10 number of fins/inch, for Operation Theatre,9 KW Heater Bank/Electrical Heat Stripper for humidity control. Display sensor with remote control should be provided. The AHU shall be configured with 2 tier arrangement for supply air fan and exhaust/return air fan mounted in a single cabinet section. Scope shall also includes for additional spare Filters each AHU\"s.
1699	Supply of Air Handling Unit with Aluminum ducting with acoustic & Thermal installation (along with provisions for fresh air) and fabrication with specifications 24/22 gauge. Supply, installation and testing of multi-blade type louver dampers of aluminum for ducts coolers to be provided with suitable links, levers and quadrants for manual control of volume of air flow and for proper balancing of the air distribution system.
1700	Supply & Installation of 14.0TR-4850CFM-Floor Mounted AHU complete with all sections as specified in technical specifications
1701	Installation & Commissioning of all items listed above
1702	Supply & Installationof VFD which needs to be installed in the starter panel supplied by electrical contractor The Communication card to transfer the entire data available on VFD to the BMS System.VFD shall be Danfoss/ ABB /SIEMENS /EMERSION HVAC SERIES
1703	5.5KW
1704	3.7KW
1705	UV Lamp for AHU
1706	3F-OT-AHU-0516TR, 5500 CFM, Supply Air fan - TSP - 115 mm, Return Air Fan TSP - 50mm
1707	Floor mounted Double Skin Air handling Unit construction with PUF Sandwich Panels at a static pressure of 115 mm WG complete with backward curved blower, TEFC blower motor suitable for operation on 415 V +/- 10%, 3Phase, 50 Hz, A.C. Supply complete with 6 Rows copper tube,Filter section with pre Filter ,Fine Filter, Terminal Hepa Filter(Filter section with MERV 8 & MERV-14 filters)with 1 set of spare & 1 set of commissioning Pre-filter apart from one assembled in the AHU. Mixing Box complete with drain connections with anti-vibration mounting, Inlet Plenum Section as mentioned in the technical specifications. Capacity : AHU Chilled water Type,16 TR 5500 CFM with supply air motor 5.5KW with 115 mm WG Static pressure and return air fan with 4100 cfm with return air motor 3.7KW with 50mm WG Static pressure with Fresh air Quantity of 1400 cfm with 8 Row Deep Cooling Coil with 10 number of fins/inch, for Operation Theatre,9 KW Heater Bank/Electrical Heat Stripper for humidity control. Display sensor with remote control should be provided. The AHU shall be configured with 2 tier arrangement for supply air fan and exhaust/return air fan mounted in a single cabinet section. Scope shall also includes for additional spare Filters each AHU\"s.
1708	Supply of Air Handling Unit with Aluminum ducting with acoustic & Thermal installation (along with provisions for fresh air) and fabrication with specifications 24/22 gauge. Supply, installation and testing of multi-blade type louver dampers of aluminum for ducts coolers to be provided with suitable links, levers and quadrants for manual control of volume of air flow and for proper balancing of the air distribution system.
1709	Supply & Installation of 16.0TR-5500CFM-Floor Mounted AHU complete with all sections as specified in technical specifications
1710	Installation & Commissioning of all items listed above
1711	Supply & Installationof VFD which needs to be installed in the starter panel supplied by electrical contractor The Communication card to transfer the entire data available on VFD to the BMS System.VFD shall be Danfoss/ ABB /SIEMENS /EMERSION HVAC SERIES
1712	5.5KW
1713	3.7KW
1714	UV Lamp for AHU
1715	3F-OT-AHU-0619TR, 5700 CFM, Supply Air fan - TSP - 115 mm, Return Air Fan TSP - 50mm
1716	Floor mounted Double Skin Air handling Unit construction with PUF Sandwich Panels at a static pressure of 115 mm WG complete with backward curved blower, TEFC blower motor suitable for operation on 415 V +/- 10%, 3Phase, 50 Hz, A.C. Supply complete with 6 Rows copper tube,Filter section with pre Filter ,Fine Filter, Terminal Hepa Filter(Filter section with MERV 8 & MERV-14 filters)with 1 set of spare & 1 set of commissioning Pre-filter apart from one assembled in the AHU. Mixing Box complete with drain connections with anti-vibration mounting, Inlet Plenum Section as mentioned in the technical specifications. Capacity : AHU Chilled water Type,19 TR 5700 CFM with supply air motor 5.5KW with 115 mm WG Static pressure and return air fan with 4300 cfm with return air motor 3.7KW with 50mm WG Static pressure with Fresh air Quantity of 1400 cfm with 8 Row Deep Cooling Coil with 10 number of fins/inch, for Operation Theatre,9 KW Heater Bank/Electrical Heat Stripper for humidity control. Display sensor with remote control should be provided. The AHU shall be configured with 2 tier arrangement for supply air fan and exhaust/return air fan mounted in a single cabinet section. Scope shall also includes for additional spare Filters each AHU\"s.
1717	Supply of Air Handling Unit with Aluminum ducting with acoustic & Thermal installation (along with provisions for fresh air) and fabrication with specifications 24/22 gauge. Supply, installation and testing of multi-blade type louver dampers of aluminum for ducts coolers to be provided with suitable links, levers and quadrants for manual control of volume of air flow and for proper balancing of the air distribution system.
1718	Supply & Installation of 19.0TR-5700CFM-Floor Mounted AHU complete with all sections as specified in technical specifications
1719	Installation & Commissioning of all items listed above
1720	Supply & Installationof VFD which needs to be installed in the starter panel supplied by electrical contractor The Communication card to transfer the entire data available on VFD to the BMS System.VFD shall be Danfoss/ ABB /SIEMENS /EMERSION HVAC SERIES.
1721	5.5KW
1722	3.7KW
1723	UV Lamp for AHU
1724	3F-OT-AHU-07 &0815TR, 5300 CFM, Supply Air fan - TSP - 115 mm, Return Air Fan TSP - 50mm
1725	Floor mounted Double Skin Air handling Unit construction with PUF Sandwich Panels at a static pressure of 115 mm WG complete with backward curved blower, TEFC blower motor suitable for operation on 415 V +/- 10%, 3Phase, 50 Hz, A.C. Supply complete with 6 Rows copper tube,Filter section with pre Filter ,Fine Filter, Terminal Hepa Filter(Filter section with MERV 8 & MERV-14 filters)with 1 set of spare & 1 set of commissioning Pre-filter apart from one assembled in the AHU. Mixing Box complete with drain connections with anti-vibration mounting, Inlet Plenum Section as mentioned in the technical specifications. Capacity : AHU Chilled water Type,15 TR 5300 CFM with supply air motor 5.5KW with 115 mm WG Static pressure and return air fan with 3900 cfm with return air motor 3.7KW with 50mm WG Static pressure with Fresh air Quantity of 1400 cfm with 8 Row Deep Cooling Coil with 10 number of fins/inch, for Operation Theatre,9 KW Heater Bank/Electrical Heat Stripper for humidity control. Display sensor with remote control should be provided. The AHU shall be configured with 2 tier arrangement for supply air fan and exhaust/return air fan mounted in a single cabinet section. Scope shall also includes for additional spare Filters each AHU\"s.
1726	Supply of Air Handling Unit with Aluminum ducting with acoustic & Thermal installation (along with provisions for fresh air) and fabrication with specifications 24/22 gauge. Supply, installation and testing of multi-blade type louver dampers of aluminum for ducts coolers to be provided with suitable links, levers and quadrants for manual control of volume of air flow and for proper balancing of the air distribution system.
1727	Supply & Installation of 15.0TR-5300CFM-Floor Mounted AHU complete with all sections as specified in technical specifications
1728	Installation & Commissioning of all items listed above
1729	Supply & Installationof VFD which needs to be installed in the starter panel supplied by electrical contractor The Communication card to transfer the entire data available on VFD to the BMS System.VFD shall be Danfoss/ ABB /SIEMENS /EMERSION HVAC SERIES
1730	5.5KW
1731	3.7KW
1732	UV Lamp for AHU
1733	3F-OT-AHU-0916TR, 5700 CFM, Supply Air fan - TSP - 115 mm, Return Air Fan TSP - 50mm
1734	Floor mounted Double Skin Air handling Unit construction with PUF Sandwich Panels at a static pressure of 115 mm WG complete with backward curved blower, TEFC blower motor suitable for operation on 415 V +/- 10%, 3Phase, 50 Hz, A.C. Supply complete with 6 Rows copper tube,Filter section with pre Filter ,Fine Filter, Terminal Hepa Filter(Filter section with MERV 8 & MERV-14 filters)with 1 set of spare & 1 set of commissioning Pre-filter apart from one assembled in the AHU. Mixing Box complete with drain connections with anti-vibration mounting, Inlet Plenum Section as mentioned in the technical specifications. Capacity : AHU Chilled water Type,16 TR 5700 CFM with supply air motor 5.5KW with 115 mm WG Static pressure and return air fan with 4300 cfm with return air motor 3.7KW with 50mm WG Static pressure with Fresh air Quantity of 1400 cfm with 8 Row Deep Cooling Coil with 10 number of fins/inch, for Operation Theatre,9 KW Heater Bank/Electrical Heat Stripper for humidity control. Display sensor with remote control should be provided. The AHU shall be configured with 2 tier arrangement for supply air fan and exhaust/return air fan mounted in a single cabinet section. Scope shall also includes for additional spare Filters each AHU\"s.
1735	Supply of Air Handling Unit with Aluminum ducting with acoustic & Thermal installation (along with provisions for fresh air) and fabrication with specifications 24/22 gauge. Supply, installation and testing of multi-blade type louver dampers of aluminum for ducts coolers to be provided with suitable links, levers and quadrants for manual control of volume of air flow and for proper balancing of the air distribution system.
1736	Supply & Installation of 16.0TR-5700CFM-Floor Mounted AHU complete with all sections as specified in technical specifications
1737	Installation & Commissioning of all items listed above
1738	Supply & Installationof VFD which needs to be installed in the starter panel supplied by electrical contractor The Communication card to transfer the entire data available on VFD to the BMS System.VFD shall be Danfoss/ ABB /SIEMENS /EMERSION HVAC SERIES
1739	5.5KW
1740	3.7KW
1741	UV Lamp for AHU
1742	3F-OT-AHU-02, AHU-03, AHU-0416TR, 5500 CFM, Supply Air fan - TSP - 115 mm, Return Air Fan TSP - 50mm
1743	Floor mounted Double Skin Air handling Unit construction with PUF Sandwich Panels at a static pressure of 115 mm WG complete with backward curved blower, TEFC blower motor suitable for operation on 415 V +/- 10%, 3Phase, 50 Hz, A.C. Supply complete with 6 Rows copper tube,Filter section with pre Filter ,Fine Filter, Terminal Hepa Filter(Filter section with MERV 8 & MERV-14 filters)with 1 set of spare & 1 set of commissioning Pre-filter apart from one assembled in the AHU. Mixing Box complete with drain connections with anti-vibration mounting, Inlet Plenum Section as mentioned in the technical specifications.Capacity : AHU Chilled water Type,16 TR 5500 CFM with supply air motor 5.5KW with 115 mm WG Static pressure and return air fan with 4100 cfm with return air motor 3.7KW with 50mm WG Static pressure with Fresh air Quantity of 1400 cfm with 8 Row Deep Cooling Coil with 10 number of fins/inch, for Operation Theatre,9 KW Heater Bank/Electrical Heat Stripper for humidity control. The AHU should be suppliedDX coil with 6/8 row suitable for above CFM with condensing unit as standby incorporating Scroll compressor, Condensing coil, Condenser Fan and fan motor with interconnecting copper pipe between compressors and Condenser coil. The power requirement for DX component with compressor & condensing unit shall be 12.1 & 6.1 KW.The AHU shall be configured with 2 tier arrangement for supply air fan and exhuast/return air fan mounted in a single cabinet section, Incase of defumigation cycle Return air fan shall be running on full speed to act as an 100% exhaust; during this time supply air fan needs to be operating at 50% of total fan capacity.
1744	Supply & Installation of 16.0TR-5500CFM-Floor Mounted AHU complete with all sections as specified in technical specifications
1745	Installation & Commissioning of all items listed above
1746	DX Condensing units
1747	11.0TR X 1No DX condensing units
1748	5.5TR X 1No DX condensing units
1749	Hard drawn copper pipe with 7/8\" dia suction line & 1/2\" dia liquid line pipe. The suction & liquid line shall be insulated with 9mm thick sleeveless nitrile rubber insulation.The rateshall be inclusive of Power & Control cable between IDU & ODU & MCB ( Provided by others) to ODU etc) 1 Rmt is equal to 1 rmt of Liquid line + 1 rmt of Suction line
1750	Supply & Installationof VFD which needs to be installed in the starter panel supplied by electrical contractor The Communication card to transfer the entire data available on VFD to the BMS System.VFD shall be Danfoss/ ABB /SIEMENS /EMERSION HVAC SERIES
1751	5.5KW
1752	3.7KW
1753	UV Lamp for AHU
1754	3F-OT-AHU-0120TR, 7200 CFM, Supply Air fan - TSP - 115 mm, Return Air Fan TSP - 50mm
1755	Floor mounted Double Skin Air handling Unit construction with PUF Sandwich Panels at a static pressure of 115 mm WG complete with backward curved blower, TEFC blower motor suitable for operation on 415 V +/- 10%, 3Phase, 50 Hz, A.C. Supply complete with 6 Rows copper tube,Filter section with pre Filter ,Fine Filter, Terminal Hepa Filter(Filter section with MERV 8 & MERV-14 filters)with 1 set of spare & 1 set of commissioning Pre-filter apart from one assembled in the AHU. Mixing Box complete with drain connections with anti-vibration mounting, Inlet Plenum Section as mentioned in the technical specifications.Capacity : AHU Chilled water Type,20 TR 7200 CFM with supply air motor 7.5KW with 115 mm WG Static pressure and return air fan with 5400 cfm with return air motor 3.7KW with 50mm WG Static pressure with Fresh air Quantity of 1800 cfm with 8 Row Deep Cooling Coil with 10 number of fins/inch, for Operation Theatre,12 KW Heater Bank/Electrical Heat Stripper for humidity control. The AHU should be suppliedDX coil with 6/8 row suitable for above CFM with condensing unit as standby incorporating Scroll compressor, Condensing coil, Condenser Fan and fan motor with interconnecting copper pipe between compressors and Condenser coil. The power requirement for DX component with compressor & condensing unit shall be 12.1 & 12.1 KW.The AHU shall be configured with 2 tier arrangement for supply air fan and exhuast/return air fan mounted in a single cabinet section, Incase of defumigation cycle Return air fan shall be running on full speed to act as an 100% exhaust; during this time supply air fan needs to be operating at 50% of total fan capacity.
1756	Supply & Installation of 20.0TR-7200CFM-Floor Mounted AHU complete with all sections as specified in technical specifications
1757	Installation & Commissioning of all items listed above
1758	DX Condensing units
1759	11.0TR X 2No DX condensing units
1760	Hard drawn copper pipe with 7/8\" dia suction line & 1/2\" dia liquid line pipe. The suction & liquid line shall be insulated with 9mm thick sleeveless nitrile rubber insulation.The rateshall be inclusive of Power & Control cable between IDU & ODU & MCB ( Provided by others) to ODU etc) 1 Rmt is equal to 1 rmt of Liquid line + 1 rmt of Suction line
1761	Supply & Installationof VFD which needs to be installed in the starter panel supplied by electrical contractor The Communication card to transfer the entire data available on VFD to the BMS System.VFD shall be Danfoss/ ABB /SIEMENS /EMERSION HVAC SERIES
1762	7.5KW
1763	3.7KW
1764	UV Lamp for AHU
1765	HORIZONTAL FLOOR MOUNTED TYPE AIR HANDLING UNITS FOR CHILLED WATER APPLICATION WITH THERMAL BREAK PROFILE (OUTDOOR APPLICATION)
1766	Double Skin unit housing supply air fan, cooling coil, electrical resistance heater strips, provision for humidifier section, motorized fresh air dampers.Double Skin Horizontal Air Handling Units complete with double skin (46±2 mm) insulated with CFC free polyurethane foam (PUF) panels of 42 Kg/cum density with thermal break profile.The outer and inner panel thickness shall be 0.8 mm and 0.63 mm GI respectively. Outer skin shall be precocated G.I. sheet and internal skin shall be plain G.I. Sheet. Frame construction shall bear the load of structure and load of the frame structure shall be uniformly distributed along the entire housing of the AHU. Food grade self adhesive coated neoprene gasket to be provided between panels and structure of the AHU to ensure the entire housing is airtight. The unit shall be provided with drive set & guard, vibration isolating rubber bush to fans and motor to avoid transmission of vibration, spring isolator for unit to avoid transmission of vibration, etc.
1767	Chilled water fed cooling coils shall be of 6/8 Row deep or as per computer coil selections which ever is greater. Face Velocity across the coils should not exceed 500 FPM.Chilled water cooling coils shall be constructed from premium quality seamless copper tubes and mechanically bonded to alumiunium fins.Chilled water cooling coils assembly shall be fitted on aluminium rails with nylon rollers for easy withdrawal from the AHU cabinet. Drain tray for chilled water cooling coils shall be made of single sheet ofSS 304 grade stainless steel sheet and should have uniform slope from all sides leading to drain connection. Drain Pan shall be insulated with 25mm thick, 55kg/cum density closed cell elastomeric insulation. AHU inspection door shall be fitted to the frame with easy release half turn nylon handles and cam locks. Handles should have facility to operate from inside the AHU.Cooling Coil should be certified by AHRI 410
1768	Handles and the locks shall have adjustable seating arrangements to exert variable pressure on the gaskets and ensure perfect sealing. Hinges shall be made of die cast from solid aluminium with stainless steel pivots and should have heavy duty load bearing capacity. AHU doors should be provided with interlock limit switch.AHU should have marine lamp including adequately rated CFL bulbinside the AHU CabinetAHU inspection door should have View window with perfectly sealedgaskets on either side to ensure air tightness. The AHU shall be provided with Mixing BOX wherever required as per HVAC drawings.The unit shall be provided with SISW plug type backward curved fan, IE3 Motor, drive package, vibration isolating rubber bush to fans and motor to avoid transmission of vibration.
1769	Filters Section shall be with 50mm thick panel type pre-filter of MERV-8& MERV- 14 as part of AHU. 1 set of spare & 1 set of commissioning filter apart from one assembled in the AHU,Cost shall be inclusive of non-cloth type canvas connection made of self extinguishing, moisture resistant flexible fabric to be provided between AHU outlet flange and the supply duct / plenum.
1770	The AHU to be selected that the noise level not to exceed 60 dBA at 1.5meter distance from the AHU cabinet in all directions.
1771	The variable frequency drive shall also be the part of the contract.VFD shall be supplied with IP 21 Protection.The price shall also include the cost of VFD with all relevant accessories as specified in the document. The construction of the fan motor shall be of IP 42.The VFD shall be capable of regulating the speed of the AHU fan from 120 % to 20% of rated AHU fan speed at the specifed rated flow & static.The VFD shall be capable of hooking to the BMS system.VFD should be supplied with Communication Card to transfer the necessary information from VFD to BMS System.All Hardware & Software required for integration should be part of scope.
1772	Supply, Installation, Testing and Commissioning of Ultra Violet Germicidal Irradiations, (UVGI) System to be installed inside the AHU for Improvement of Indoor Air Quality and/orEnergy Saving ( when installed inside the AHU\"s) as per Specifications. The Average Life of UV lamps Shall be 12000hrs. The UVGI System shall consist of UV lamps, parabolic reflector (Reflector only incase of AHU mounting) with its mounting assembly and control panel. The Control Panel shall be mounted outside the AHU and should Consist ofballast, hour meter, MCB (or disconnect switch), Indicating Light. The Prices to include inter connected wiring (UV resistant) between the UVGI lamps and its panel.
1773	UV lamp shall be fabricated out of special high transmission Quartz Glass and of the high output, hot cathode, T5 (15mm) diameter and They shall produce 95% of their energy at 254 nm. UV lamp shall not produce ozone or other secondary contamination and to substantiate this the lamps shall be tested by an approved Indian lab for output performance of 254 nm. Lamp manufacturer to submit the certificate from this lab. The lamp shall be high output type and should not be lower than 800 mA.The UV intensity of each lamp shall be 800µW/cm² when measured at a horizontal distance of 10 inches from the lamp. Any company offering to supply Ultraviolet Germicidal Irradiation (UVGI) System must have a minimum experience of 50 months in supplying and implementing installations meeting these specifications. The ballast shall only be installed in a control panel and not inside the reflector assembly itself. The system shall also include prices for spare lamps for one replacement after 12000 hrs. of initial supply. The number of lamps in an UVGI System shall be calculated to ensure the minimum wattage as per selection chart based on 4016 microwatt. sec /cm2 dosage over 4 air changes.The HVAC contactor shall submit the Coil Size and CFM for AHU mounted application and Duct size with CFM for Duct mounted application. The length of straight duct should be provided by the HVAC Contractor at site.
1774	ELECTRIC STRIP HEATERS ALONG WITH PANELS
1775	Tubular Strip heaters with safety thermostats, The Electrical panel for heaters shall comprise incoming MCCB, individual contactor for each bank of heaters, potential free contacts, interlocks with CSU starter and safety thermostat, phase indicators, ON,OFF, TRIP indicators for each bank of heaters, Digital Ammeter & Voltmeter with selector switches, Auto-OFF-Manual selector switch, Earth leakage relays etc., The panels shall be with necessary provisions and potential free contacts for control & monitoring from the third party BMS system. The cost shall be inclusive of necessary hardware for integration to the third party BMS.The quoted price shall be inclusive of the Variable frequency drive which shall be housed in the Starter panel supplied by Main Electrical Contractor.The capacities and other details of the AHUs required are given in the following order:
1776	Electrical Vendor Scope: Starter panel shall be supplied by main electrical contractor. Starter panel shall have necessary power and control contactors for fans,heaters,humidifers, overload relays, potential free contacts for BMS interfacing, internal power and control wirings. The starter panel shall be supplied with space provision for installing VFDs in the event the client opts for VFD inlieu of EC motors.The starter panel shall have an isolator fordisconneting power and the starter panel shall be mounted on the external frame of the cabinet. The starter panel shall be with IP 54 protection.The finish of the box shall be similar to the unit cabinet finish. AHU with EC fan motors shall have RS485 ports for soft integration with third party BMS.
1777	Supply Air StreamFilter Sections consisting of prefilter, microvee Filters.Fan section with PLUG Fan, blower motor, drive, volume control damper and duct flexible connection.8 row deep cooling coil (minimum).Electrical Strip heaters.Suitable VFD for fan motor.Discharge plenum section.
1778	Equipment Description
1779	SERVING AREA : 3F- NICU-5 BEDS-AHU-15; 3F- HDU/ICU-5 BEDS-AHU-16 ; 3F - PICU-5 BEDS- AHU-17: LOCATION : 4F TERRACE7.5TR, 3000 CFM, Supply Air fan - TSP - 75 mm
1780	Floor mounted Double Skin Air handling Unit construction with PUF Sandwich Panels at a static pressure of 75 mm WG complete with backward curved blower, TEFC blower motor suitable for operation on 415 V +/- 10%, 3Phase, 50 Hz, A.C. Supply complete with 6 Rows copper tube,Filter section with pre Filter& Fine Filters (Filter section with MERV 8 & MERV-14 filters)with 1 set of spare & 1 set of commissioning Pre-filter apart from one assembled in the AHU. Mixing Box complete with drain connections with anti-vibration mounting, Inlet Plenum Section as mentioned in the in the technical specifications. Capacity : AHU Chilled water Type,7.5 TR 3000 CFM with supply air motor 2.2 KW with 75 mm WG Static pressure, 4.5 KW Heater Bank/Electrical Heat Stripper for humidity control. Scope shall also includes for additional spare Filters each AHU\"s.
1781	Supply & Installation of 7.5TR-3000CFM-Floor Mounted AHU complete with all sections as specified in technical specifications
1782	Installation, testing & Commissioning of all items listed above
1783	Supply & Installationof VFD which needs to be installed in the starter panel supplied by electrical contractor The Communication card to transfer the entire data available on VFD to the BMS System.VFD shall be Danfoss/ ABB /SIEMENS /EMERSION HVAC SERIES
1784	2.2 KW
1785	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1786	UV Lamp for AHU
1787	SERVING AREA : 3F- ICCU-5 BEDS-AHU-18- 4F TERRACE ; 3F- BURNS ICU- 5 BEDS- ROOF TERRACE- AHU-19; 3F- SNCU- 5 BEDS- AHU-22- 5F TERRACE ; 3F-RICU- 5 BEDS- AHU-23: 5F TERRACE 8.0TR, 3200 CFM, Supply Air fan - TSP - 75 mm
1788	Floor mounted Double Skin Air handling Unit construction with PUF Sandwich Panels at a static pressure of 75 mm WG complete with backward curved blower, TEFC blower motor suitable for operation on 415 V +/- 10%, 3Phase, 50 Hz, A.C. Supply complete with 6 Rows copper tube,Filter section with pre Filter& Fine Filters (Filter section with MERV 8 & MERV-14 filters)with 1 set of spare & 1 set of commissioning Pre-filter apart from one assembled in the AHU. Mixing Box complete with drain connections with anti-vibration mounting, Inlet Plenum Section as mentioned in the in the technical specifications. Capacity : AHU Chilled water Type,8.0 TR 3200 CFM with supply air motor 2.2 KW with 75 mm WG Static pressure,4.5 KW Heater Bank/Electrical Heat Stripper for humidity control. Scope shall also includes for additional spare Filters each AHU\"s.
1789	Supply & Installation of 8.0TR-3200CFM-Floor Mounted AHU complete with all sections as specified in technical specifications
1790	Installation, testing & Commissioning of all items listed above
1791	Supply & Installationof VFD which needs to be installed in the starter panel supplied by electrical contractor The Communication card to transfer the entire data available on VFD to the BMS System.VFD shall be Danfoss/ ABB /SIEMENS /EMERSION HVAC SERIES
1792	2.2 KW
1793	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1794	UV Lamp for AHU
1795	SERVING AREA 3F- MINOR OT-AHU-24; LOCATION -5F TERRACE7.0TR, 2800/3000 CFM, Supply Air fan - TSP - 75 mm
1796	Floor mounted Double Skin Air handling Unit construction with PUF Sandwich Panels at a static pressure of 75 mm WG complete with backward curved blower, TEFC blower motor suitable for operation on 415 V +/- 10%, 3Phase, 50 Hz, A.C. Supply complete with 6 Rows copper tube,Filter section with pre Filter& Fine Filters (Filter section with MERV 8 & MERV-14 filters)with 1 set of spare & 1 set of commissioning Pre-filter apart from one assembled in the AHU. Mixing Box complete with drain connections with anti-vibration mounting, Inlet Plenum Section as mentioned in the in the technical specifications. Capacity : AHU Chilled water Type,7.0 TR 2800 CFM with supply air motor 3.7 KW with 75 mm WG Static pressure ,4.5 KW Heater Bank/Electrical Heat Stripper for humidity control. Scope shall also includes for additional spare Filters each AHU\"s.VFD which needs to be installed in the starter panel supplied by electrical contractor The Communication card to transfer the entire data available on VFD to the BMS System.VFD shall be Danfoss/ ABB /SIEMENS /EMERSION HVAC SERIES.
1797	Supply & Installation of 7.0TR-2800/3000CFM-Floor Mounted AHU complete with all sections as specified in technical specifications
1798	UV Lamp for AHU
1799	3F- STERILE CORRIDOR-AHU-10; 4F TERRACE 8.5TR, 2900 CFM, Supply Air fan - TSP - 65 mm
1800	Floor mounted Double Skin Air handling Unit construction with PUF Sandwich Panels at a static pressure of 75 mm WG complete with backward curved blower, TEFC blower motor suitable for operation on 415 V +/- 10%, 3Phase, 50 Hz, A.C. Supply complete with 6 Rows copper tube,Filter section with pre Filter& Fine Filters (Filter section with MERV 8 & MERV-14 filters)with 1 set of spare & 1 set of commissioning Pre-filter apart from one assembled in the AHU. Mixing Box complete with drain connections with anti-vibration mounting, Inlet Plenum Section as mentioned in the in the technical specifications. Capacity : AHU Chilled water Type,8.5 TR 2900 CFM with supply air motor 2.2 KW with 65 mm WG Static pressure. Scope shall also includes for additional spare Filters each AHU\"s.
1801	Supply & Installation of 8.5TR-2900CFM-Floor Mounted AHU complete with all sections as specified in technical specifications
1802	Installation, testing & Commissioning of all items listed above
1803	Supply & Installationof VFD which needs to be installed in the starter panel supplied by electrical contractor The Communication card to transfer the entire data available on VFD to the BMS System.VFD shall be Danfoss/ ABB /SIEMENS /EMERSION HVAC SERIES
1804	2.2 KW
1805	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1806	UV Lamp for AHU
1807	3F- SEMI STERILE CORRIDOR 1 & 2-AHU-11; 4F TERRACE 23TR, 8900 CFM, Supply Air fan - TSP - 65 mm
1808	Floor mounted Double Skin Air handling Unit construction with PUF Sandwich Panels at a static pressure of 75 mm WG complete with backward curved blower, TEFC blower motor suitable for operation on 415 V +/- 10%, 3Phase, 50 Hz, A.C. Supply complete with 6 Rows copper tube,Filter section with pre Filter& Fine Filters (Filter section with MERV 8 & MERV-14 filters)with 1 set of spare & 1 set of commissioning Pre-filter apart from one assembled in the AHU. Mixing Box complete with drain connections with anti-vibration mounting, Inlet Plenum Section as mentioned in the in the technical specifications. Capacity : AHU Chilled water Type,23 TR 8900 CFM with supply air motor 7.5 KW with 65 mm WG Static pressure. Scope shall also includes for additional spare Filters each AHU\"s.
1809	Supply & Installation of 23TR-8900CFM-Floor Mounted AHU complete with all sections as specified in technical specifications
1810	Installation, testing & Commissioning of all items listed above
1811	Supply & Installationof VFD which needs to be installed in the starter panel supplied by electrical contractor The Communication card to transfer the entire data available on VFD to the BMS System.VFD shall be Danfoss/ ABB /SIEMENS /EMERSION HVAC SERIES
1812	7.5 KW
1813	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1814	UV Lamp for AHU
1815	3F- PRE OP-9 BEDS-AHU-12; 4F TERRACE 11.5TR, 4600 CFM, Supply Air fan - TSP - 65 mm
1816	Floor mounted Double Skin Air handling Unit construction with PUF Sandwich Panels at a static pressure of 75 mm WG complete with backward curved blower, TEFC blower motor suitable for operation on 415 V +/- 10%, 3Phase, 50 Hz, A.C. Supply complete with 6 Rows copper tube,Filter section with pre Filter& Fine Filters (Filter section with MERV 8 & MERV-14 filters)with 1 set of spare & 1 set of commissioning Pre-filter apart from one assembled in the AHU. Mixing Box complete with drain connections with anti-vibration mounting, Inlet Plenum Section as mentioned in the in the technical specifications. Capacity : AHU Chilled water Type,11.5TR, 4600 CFM with supply air motor 3.7 KW with 65 mm WG Static pressure. Scope shall also includes for additional spare Filters each AHU\"s.
1817	Supply & Installation of 11.5TR, 4600 CFM-Floor Mounted AHU complete with all sections as specified in technical specifications
1818	Installation, testing & Commissioning of all items listed above
1819	Supply & Installationof VFD which needs to be installed in the starter panel supplied by electrical contractor The Communication card to transfer the entire data available on VFD to the BMS System.VFD shall be Danfoss/ ABB /SIEMENS /EMERSION HVAC SERIES
1820	3.7 KW
1821	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1822	UV Lamp for AHU
1823	3F- POST OP-18 BEDS-AHU-13; 4F TERRACE 21TR, 8450 CFM, Supply Air fan - TSP - 65 mm
1824	Floor mounted Double Skin Air handling Unit construction with PUF Sandwich Panels at a static pressure of 75 mm WG complete with backward curved blower, TEFC blower motor suitable for operation on 415 V +/- 10%, 3Phase, 50 Hz, A.C. Supply complete with 6 Rows copper tube,Filter section with pre Filter& Fine Filters (Filter section with MERV 8 & MERV-14 filters)with 1 set of spare & 1 set of commissioning Pre-filter apart from one assembled in the AHU. Mixing Box complete with drain connections with anti-vibration mounting, Inlet Plenum Section as mentioned in the in the technical specifications. Capacity : AHU Chilled water Type,21TR, 8450 CFM, with supply air motor 5.5 KW with 65 mm WG Static pressure. Scope shall also includes for additional spare Filters each AHU\"s.
1825	Supply & Installation of 21TR, 8450 CFM,-Floor Mounted AHU complete with all sections as specified in technical specifications
1826	Installation, testing & Commissioning of all items listed above
1827	Supply & Installationof VFD which needs to be installed in the starter panel supplied by electrical contractor The Communication card to transfer the entire data available on VFD to the BMS System.VFD shall be Danfoss/ ABB /SIEMENS /EMERSION HVAC SERIES
1828	5.5 KW
1829	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1830	UV Lamp for AHU
1831	3F- CSSD-AHU-14; 4F TERRACE 19TR, 7600 CFM, Supply Air fan - TSP - 65 mm
1832	Floor mounted Double Skin Air handling Unit construction with PUF Sandwich Panels at a static pressure of 75 mm WG complete with backward curved blower, TEFC blower motor suitable for operation on 415 V +/- 10%, 3Phase, 50 Hz, A.C. Supply complete with 6 Rows copper tube,Filter section with pre Filter& Fine Filters (Filter section with MERV 8 & MERV-14 filters)with 1 set of spare & 1 set of commissioning Pre-filter apart from one assembled in the AHU. Mixing Box complete with drain connections with anti-vibration mounting, Inlet Plenum Section as mentioned in the in the technical specifications. Capacity : AHU Chilled water Type,19TR, 7600 CFM with supply air motor 5.5 KW with 65 mm WG Static pressure. Scope shall also includes for additional spare Filters each AHU\"s.
1833	Supply & Installation of 19TR, 7600 CFM,-Floor Mounted AHU complete with all sections as specified in technical specifications
1834	Installation, testing & Commissioning of all items listed above
1835	Supply & Installationof VFD which needs to be installed in the starter panel supplied by electrical contractor The Communication card to transfer the entire data available on VFD to the BMS System.VFD shall be Danfoss/ ABB /SIEMENS /EMERSION HVAC SERIES
1836	5.5 KW
1837	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1838	UV Lamp for AHU
1839	3F- PRE FUNCTION AREA-AHU with VFD -20; ROOF TERRACE 16TR 6450 CFM, Supply Air fan - TSP - 65 mm
1840	Floor mounted Double Skin Air handling Unit construction with PUF Sandwich Panels at a static pressure of 75 mm WG complete with backward curved blower, TEFC blower motor suitable for operation on 415 V +/- 10%, 3Phase, 50 Hz, A.C. Supply complete with 6 Rows copper tube,Filter section with pre Filter& Fine Filters (Filter section with MERV 8 & MERV-14 filters)with 1 set of spare & 1 set of commissioning Pre-filter apart from one assembled in the AHU. Mixing Box complete with drain connections with anti-vibration mounting, Inlet Plenum Section as mentioned in the in the technical specifications. Capacity : AHU Chilled water Type,16TR 6450 CFM, with supply air motor 5.5 KW with 65 mm WG Static pressure.VFD which needs to be installed in the starter panel supplied by electrical contractor The Communication card to transfer the entire data available on VFD to the BMS System.VFD shall be Danfoss/ ABB /SIEMENS /EMERSION HVAC SERIES Scope shall also includes for additional spare Filters each AHU\"s.
1841	Supply & Installation of 16TR 6450 CFM,-Floor Mounted AHU complete with all sections as specified in technical specifications
1842	UV Lamp for AHU
1843	3F-AUDITORIUM-AHU-21; ROOF TERRACE36TR 13000 CFM, Supply Air fan - TSP - 65 mm
1844	Floor mounted Double Skin Air handling Unit construction with PUF Sandwich Panels at a static pressure of 75 mm WG complete with backward curved blower, TEFC blower motor suitable for operation on 415 V +/- 10%, 3Phase, 50 Hz, A.C. Supply complete with 6 Rows copper tube,Filter section with pre Filter& Fine Filters (Filter section with MERV 8 & MERV-14 filters)with 1 set of spare & 1 set of commissioning Pre-filter apart from one assembled in the AHU. Mixing Box complete with drain connections with anti-vibration mounting, Inlet Plenum Section as mentioned in the in the technical specifications. Capacity : AHU Chilled water Type,36TR 13000 CFM, with supply air motor 9.3 KW with 65 mm WG Static pressure. Scope shall also includes for additional spare Filters each AHU\"s.
1845	Supply & Installation of 36TR 13000 CFM,-Floor Mounted AHU complete with all sections as specified in technical specifications
1846	Installation, testing & Commissioning of all items listed above
1847	Supply & Installationof VFD which needs to be installed in the starter panel supplied by electrical contractor The Communication card to transfer the entire data available on VFD to the BMS System.VFD shall be Danfoss/ ABB /SIEMENS /EMERSION HVAC SERIES
1848	9.3 KW
1849	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1850	UV Lamp for AHU
1851	5F-LAB-AHU-1; ROOF TERRACE23TR 9200 CFM, Supply Air fan - TSP - 65 mm
1852	Floor mounted Double Skin Air handling Unit construction with PUF Sandwich Panels at a static pressure of 75 mm WG complete with backward curved blower, TEFC blower motor suitable for operation on 415 V +/- 10%, 3Phase, 50 Hz, A.C. Supply complete with 6 Rows copper tube,Filter section with pre Filter& Fine Filters (Filter section with MERV 8 & MERV-14 filters)with 1 set of spare & 1 set of commissioning Pre-filter apart from one assembled in the AHU. Mixing Box complete with drain connections with anti-vibration mounting, Inlet Plenum Section as mentioned in the in the technical specifications. Capacity : AHU Chilled water Type,23TR 9200 CFM, with supply air motor 7.5 KW with 65 mm WG Static pressure. Scope shall also includes for additional spare Filters each AHU\"s.
1853	Supply & Installation of 23TR 9200 CFM,-Floor Mounted AHU complete with all sections as specified in technical specifications
1854	Installation, testing & Commissioning of all items listed above
1855	Supply & Installationof VFD which needs to be installed in the starter panel supplied by electrical contractor The Communication card to transfer the entire data available on VFD to the BMS System.VFD shall be Danfoss/ ABB /SIEMENS /EMERSION HVAC SERIES
1856	7.5 KW
1857	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1858	UV Lamp for AHU
1859	5F-BLOOD BANK-AHU-2; ROOF TERRACE16TR 6400 CFM, Supply Air fan - TSP - 65 mm
1860	Floor mounted Double Skin Air handling Unit construction with PUF Sandwich Panels at a static pressure of 75 mm WG complete with backward curved blower, TEFC blower motor suitable for operation on 415 V +/- 10%, 3Phase, 50 Hz, A.C. Supply complete with 6 Rows copper tube,Filter section with pre Filter& Fine Filters (Filter section with MERV 8 & MERV-14 filters)with 1 set of spare & 1 set of commissioning Pre-filter apart from one assembled in the AHU. Mixing Box complete with drain connections with anti-vibration mounting, Inlet Plenum Section as mentioned 5.5 KW with 65 mm WG Static pressure.VFD which needs to be installed in the starter panel supplied by electrical contractor The Communication card to transfer the entire data available on VFD to the BMS System.VFD shall be Danfoss/ ABB /SIEMENS /EMERSION HVAC SERIES Scope shall also includes for additional spare Filters each AHU\"s.
1861	Supply & Installation of 16TR 6400 CFM,-Floor Mounted AHU complete with all sections as specified in technical specifications
1862	UV Lamp for AHU
1863	DOUBLE SKIN AIR HANDLING UNITS - CEILING SUSPENDED TYPE
1864	Double skin type Ceiling suspended units complete with double skin (43±2 mm) insulated with CFC free polyurethane foam (PUF) panels of 42 Kg/cum density. The outer and inner panel thickness shall be 0.8 mm and 0.63 mm GI respectively. Outer skin shall be precoated G.I. sheet and internal skin shall be powder coated G.I. sheet suitable for chilled water application. The unit shall be provided with plug fans, Motor, minimum 4 row cooling coil and drain pan with 15mm thick nitrile rubber insulation, inlet filter section with MERV-8 filters, drive set & guard, spring isolator to avoid transmission of vibration,etc. The noise of the unit shall not exceed more than 60 dBA at 1m distance from the unit and at maximum operating speed . The height of theunit shall not exceed 650mm. Additional FRP drain tray shall be considered for this units.Cooling Coil should be certified by AHRI 410.
1865	The unit shall be provided with belt driven forward curved fans, IE3 Motor, drive package, vibration isolating rubber bush to fans and motor to avoid transmission of vibration. All CSU motor pulleys shall be of adjustable type only. Filters Section shall be with 50mm thick panel type pre-filter of MERV-8 as part of AHU. 1 set of spare & 1 set of commissioning filter apart from one assembled in the AHU,Cost shall be inclusive of non-cloth type canvas connection made of self extinguishing, moisture resistant flexible fabric to be provided between AHU outlet flange and the supply duct / plenum.Springisolators shall be used in the installation of the Ceiling suspended Units to ensure there is no transmission of vibration from the equipment to the building structure.
1866	GROUND FLOOR
1867	Double Skin CSU- Capacity-12TR capacity,4800 Dcfm with 0.89 sqm cooling cooling coil face area, 40 mmwg fan external static, 4/6 row cooling coil, 2.2 Kw fan motor, filter section with Pre Filter (EU-3)-MERV-8. CSU shall be with 25 mm thick puf panel -Serving area: Observation Ward Female- CSU-1
1868	Supply & Installation of of Ceiling suspended unit complete with all sections as specified in technical specifications
1869	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1870	Double Skin CSU- Capacity-9TR capacity,3600 Dcfm with 0.66 sqm cooling cooling coil face area, 40 mmwg fan external static, 4/6 row cooling coil, 2.2 Kw fan motor, filter section with Pre Filter (EU-3)-MERV-8, Heater banks . CSU shall be with 25 mm thick puf panel -Serving area: ICCU-6 BEDS- CSU-2
1871	Supply & Installation of of Ceiling suspended unit complete with all sections as specified in technical specifications
1872	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1873	ELECTRIC STRIP HEATERS ALONG WITH PANELS
1874	Tubular Strip heaters with safety thermostats, The Electrical panel for heaters shall comprise incoming MCCB, individual contactor for each bank of heaters, potential free contacts, interlocks with CSU starter and safety thermostat, phase indicators, ON,OFF, TRIP indicators for each bank of heaters, Digital Ammeter & Voltmeter with selector switches, Auto-OFF-Manual selector switch, Earth leakage relays etc., The panels shall be with necessary provisions and potential free contacts for control & monitoring from the third party BMS system. The cost shall be inclusive of necessary hardware for integration to the third party BMS.
1875	3 KW HEATER PANEL
1876	Double Skin CSU- Capacity-3TR capacity,1200 Dcfm with 0.22 sqm cooling cooling coil face area, 25 mmwg fan external static, 4/6 row cooling coil, 0.75 Kw fan motor, filter section with Pre Filter (EU-3)-MERV-8. CSU shall be with 25 mm thick puf panel -Serving area: Recovery , Sterile Room- CSU-3
1877	Supply & Installation of of Ceiling suspended unit complete with all sections as specified in technical specifications
1878	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1879	Double Skin CSU- Capacity-10TR capacity,3500 Dcfm with 0.65 sqm cooling cooling coil face area, 40 mmwg fan external static, 4/6 row cooling coil, 2.2 Kw fan motor, filter section with Pre Filter (EU-3)-MERV-8. CSU shall be with 25 mm thick puf panel -Serving area: Trauma Care- 12 Beds- CSU-4
1880	Supply & Installation of of Ceiling suspended unit complete with all sections as specified in technical specifications
1881	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1882	Double Skin CSU- Capacity-12TR capacity,4800 Dcfm with 0.89 sqm cooling cooling coil face area, 40 mmwg fan external static, 4/6 row cooling coil, 2.2 Kw fan motor, filter section with Pre Filter (EU-3)-MERV-8. CSU shall be with 25 mm thick puf panel -Serving area: Observation Ward Male- CSU-5
1883	Supply & Installation of of Ceiling suspended unit complete with all sections as specified in technical specifications
1884	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1885	Double Skin CSU- Capacity-4TR capacity,1600 Dcfm with 0.29 sqm cooling cooling coil face area, 25 mmwg fan external static, 4/6 row cooling coil, 0.75 Kw fan motor, filter section with Pre Filter (EU-3)-MERV-8. CSU shall be with 25 mm thick puf panel -Serving area: Computer Room/ Control Room- CSU-6
1886	Supply & Installation of of Ceiling suspended unit complete with all sections as specified in technical specifications
1887	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1888	Double Skin CSU- Capacity-9TR capacity,3600 Dcfm with 0.66 sqm cooling cooling coil face area, 40 mmwg fan external static, 4/6 row cooling coil, 2.2 Kw fan motor, filter section with Pre Filter (EU-3)-MERV-8,Heater banks . CSU shall be with 25 mm thick puf panel -Serving area: CT- CSU-7
1889	Supply & Installation of of Ceiling suspended unit complete with all sections as specified in technical specifications
1890	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1891	ELECTRIC STRIP HEATERS ALONG WITH PANELS
1892	Tubular Strip heaters with safety thermostats, The Electrical panel for heaters shall comprise incoming MCCB, individual contactor for each bank of heaters, potential free contacts, interlocks with CSU starter and safety thermostat, phase indicators, ON,OFF, TRIP indicators for each bank of heaters, Digital Ammeter & Voltmeter with selector switches, Auto-OFF-Manual selector switch, Earth leakage relays etc., The panels shall be with necessary provisions and potential free contacts for control & monitoring from the third party BMS system. The cost shall be inclusive of necessary hardware for integration to the third party BMS.
1893	3 KW HEATER PANEL
1894	Double Skin CSU- Capacity-4.5TR capacity,1800 Dcfm with 0.33 sqm cooling cooling coil face area, 25 mmwg fan external static, 4/6 row cooling coil, 1.1 Kw fan motor, filter section with Pre Filter (EU-3)-MERV-8. CSU shall be with 25 mm thick puf panel -Serving area: Fluroscopy- CSU-8
1895	Supply & Installation of of Ceiling suspended unit complete with all sections as specified in technical specifications
1896	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1897	Double Skin CSU- Capacity-7.5TR capacity,3000 Dcfm with 0.55 sqm cooling cooling coil face area, 25 mmwg fan external static, 4/6 row cooling coil, 1.5 Kw fan motor, filter section with Pre Filter (EU-3)-MERV-8. CSU shall be with 25 mm thick puf panel -Serving area: MRI- UPS- CSU-9
1898	Supply & Installation of of Ceiling suspended unit complete with all sections as specified in technical specifications
1899	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1900	Double Skin CSU- Capacity-12TR capacity,4800 Dcfm with 0.89 sqm cooling cooling coil face area, 40 mmwg fan external static, 4/6 row cooling coil, 2.2 Kw fan motor, filter section with Pre Filter (EU-3)-MERV-8. CSU shall be with 25 mm thick puf panel -Serving area: MRI & CT Equipment Room- CSU-10
1901	Supply & Installation of of Ceiling suspended unit complete with all sections as specified in technical specifications
1902	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1903	Double Skin CSU- Capacity-5TR capacity,2000 Dcfm with 0.37 sqm cooling cooling coil face area, 40 mmwg fan external static, 4/6 row cooling coil,0.75Kw fan motor, filter section with Pre Filter (EU-3)-MERV-8. CSU shall be with 25 mm thick puf panel -Serving area: Hub Room- CSU-11
1904	Supply & Installation of of Ceiling suspended unit complete with all sections as specified in technical specifications
1905	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1906	Double Skin CSU- Capacity-3.5TR capacity,1400 Dcfm with 0.26 sqm cooling cooling coil face area, 25 mmwg fan external static, 4/6 row cooling coil,0.75Kw fan motor, filter section with Pre Filter (EU-3)-MERV-8. CSU shall be with 25 mm thick puf panel -Serving area: Battery Room- CSU-12
1907	Supply & Installation of of Ceiling suspended unit complete with all sections as specified in technical specifications
1908	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1909	Double Skin CSU- Capacity-16TR capacity,6400 Dcfm with 1.18 sqm cooling cooling coil face area, 25 mmwg fan external static, 4/6 row cooling coil, 3.7 Kw fan motor, filter section with Pre Filter (EU-3)-MERV-8. CSU shall be with 25 mm thick puf panel -Serving area: UPS Room- CSU-13
1910	Supply & Installation of of Ceiling suspended unit complete with all sections as specified in technical specifications
1911	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1912	Double Skin CSU- Capacity-6.5TR capacity,2600 Dcfm with 0.48 sqm cooling cooling coil face area, 25 mmwg fan external static, 4/6 row cooling coil, 1.5 Kw fan motor, filter section with Pre Filter (EU-3)-MERV-8. CSU shall be with 25 mm thick puf panel -Serving area: Post Martum Recovery Room- CSU-14
1913	Supply & Installation of of Ceiling suspended unit complete with all sections as specified in technical specifications
1914	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1915	Double Skin CSU- Capacity-5.5TR capacity,2200 Dcfm with 0.40 sqm cooling cooling coil face area, 25 mmwg fan external static, 4/6 row cooling coil, 1.1 Kw fan motor, filter section with Pre Filter (EU-3)-MERV-8. CSU shall be with 25 mm thick puf panel -Serving area: Labour Room- 4 Beds- CSU-15
1916	Supply & Installation of of Ceiling suspended unit complete with all sections as specified in technical specifications
1917	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1918	Double Skin CSU- Capacity-6.0TR capacity,2400 Dcfm with 0.44 sqm cooling cooling coil face area, 25 mmwg fan external static, 4/6 row cooling coil, 1.1 Kw fan motor, filter section with Pre Filter (EU-3)-MERV-8. CSU shall be with 25 mm thick puf panel -Serving area: Eclampsia- 3 Beds- CSU-16, Nurse Room, Anesthetist Room-2 etc- CSU-17
1919	Supply & Installation of of Ceiling suspended unit complete with all sections as specified in technical specifications
1920	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1921	FIRST FLOOR
1922	Double Skin CSU- Capacity-3.0TR capacity,1200 Dcfm with 0.22 sqm cooling cooling coil face area, 25 mmwg fan external static, 4/6 row cooling coil, 0.55 Kw fan motor, filter section with Pre Filter (EU-3)-MERV-8. CSU shall be with 25 mm thick puf panel -Serving area: Hub Room- CSU-1
1923	Supply & Installation of of Ceiling suspended unit complete with all sections as specified in technical specifications
1924	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1925	SECOND FLOOR
1926	Double Skin CSU- Capacity-3.0TR capacity,1200 Dcfm with 0.22 sqm cooling cooling coil face area, 25 mmwg fan external static, 4/6 row cooling coil, 0.55 Kw fan motor, filter section with Pre Filter (EU-3)-MERV-8. CSU shall be with 25 mm thick puf panel -Serving area: Hub Room- CSU-1
1927	Supply & Installation of of Ceiling suspended unit complete with all sections as specified in technical specifications
1928	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1929	THIRD FLOOR
1930	Double Skin CSU- Capacity-4.5TR capacity,1800 Dcfm with 0.33 sqm cooling cooling coil face area, 25 mmwg fan external static, 4/6 row cooling coil, 0.75 Kw fan motor, filter section with Pre Filter (EU-3)-MERV-8. CSU shall be with 25 mm thick puf panel -Serving area: Hub Room- CSU-1
1931	Supply & Installation of of Ceiling suspended unit complete with all sections as specified in technical specifications
1932	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1933	FOURTH FLOOR
1934	Double Skin CSU- Capacity-4.0TR capacity,1600 Dcfm with 0.29 sqm cooling cooling coil face area, 25 mmwg fan external static, 4/6 row cooling coil, 0.75 Kw fan motor, filter section with Pre Filter (EU-3)-MERV-8. CSU shall be with 25 mm thick puf panel -Serving area: Hub Room- CSU-1
1935	Supply & Installation of of Ceiling suspended unit complete with all sections as specified in technical specifications
1936	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1937	FIFTH FLOOR
1938	Double Skin CSU- Capacity-4.5TR capacity,1800 Dcfm with 0.33 sqm cooling cooling coil face area, 25 mmwg fan external static, 4/6 row cooling coil, 0.75 Kw fan motor, filter section with Pre Filter (EU-3)-MERV-8. CSU shall be with 25 mm thick puf panel -Serving area: Hub Room- CSU-1
1939	Supply & Installation of of Ceiling suspended unit complete with all sections as specified in technical specifications
1940	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
1941	FAN COILUNITS CHILLED WATER TYPE
1942	Supply, Installation, testing and commissioning of ceiling concealed type high static Fan Coil Units with 3 speed BLDC fan motor, having coil section, blower section, filter section, with insulated extended drain tray, supports, copper piping connections, etc. of the following capacities. Fire retardant canvass connections with GI . powder coated finished angle flanges on both sides, etc. Extended tray should accommodate all valves & 2-way On /OFF valves, etc. as per the specifications and approved drawings.Ductable fan coil units, if provided shall be capable of rated air discharge against specified external static resistance which shall be 200Pa by default.Material of construction – Aluminium extruded profile, Drain pan – stainless steel,digital Thermostats with display and required control cable for FCU\"s also part of scope of work.
1943	A valve package consisting of ball valve with strainer for Inlet &ball valve without strainer for outlet connections. 2 way ON/OFF Valve with actuator, Digital Thermostat shall comprise remote temperature sensing element and shall have functions like unit on/off control, fan speed modulation control and temperature control. Thermalinsulation of valves pacakge with class \"O\" tubular nitrile rubber materials shall also be considered under this scope.All these valves shall be supplied by the FCU supplierr as factory fitted unit. The Valve and actutor shall be suitable for the third party BMS operation & monitoring. The valve package shall be quoted as an integratal part ofFCU supply and no additonal cost will be accepted if the valve packages are not considered by the FCU supplier.The FCU units to be supplied with BMS Card/ interface to facilitate following IO points : ON/OFF Command & Status, Trip status , Room Temperature status
1944	Motor shall be of TEFC, IP-55 protection, Class \"F\" insulation, suitable for 1phase, 230volts, 50hz power supply. as per tender drawing and specification. Provision shall be made to connect fire module to switch off the unit during fire.The cost shall be inclusive of necessary power & control cables, communication cables between thermostat and valve required for the operation of the unit.Chilled water entry shall be at 44°F and chilled water leaving shall be 54°F and water flow shall be 2.4 GPM/TR.The cooling capacity mentioned shall be actual capacity to be delivered by the equipment at the design condition of 23+/-1deg C.
1945	Ground Floor
1946	1.5TR capacity, 600 Dcfm- USG-1,2,3-FCU-1,2,3; Nursing Superindent- FCU-10
1947	3.0TR capacity, 1200 Dcfm- X Ray-1,2,3& 4- FCU-4,5,7&8
1948	2.5TR capacity, 1000 Dcfm- Store Room- X ray films- FCU-6; Dean-FCU-9; Medical Superindent- FCU-11
1949	BMS INTERFACE/CARD AND GATEWAY CONTROLLERFOR CHILLED WATER TYPE-CSU\"S, FCU\"S,CASSETTE UNITS
1950	Supply , Installation , Testing & Commissioning BMS interface/Card with Required internal cabling & Gateway controller with BACNetIP/Modbus Protocol . BMS interface to facilitate following IO points : ON/OFF Command & Status, Trip status , Room Temperature status.Supply, Installation, Testing & Commissioning & Handing over of the following:
1951	PART E -VENTILATION UNITS
1952	FLOOR MOUNTED CABINET TYPE EXHAUST AIR UNITS
1953	The Double skin Horizontal floor mounted cabinet type fan with 23±2mm thick PUF sandwiched insulated panel,CFC free polyurethane foam (PUF) panels of 40 Kg/cum density.Sandwitched between 0.6 mm thick G.I. Sheets. Outer skin shall be pre plasticized G.I. sheet and internal skin shall be powder coated G.I. Sheet with DIDW centrifugal fan with Backward curved aero foil impeller, IE-3 Motor, Pulleys, Belts & Belt guard, drive sets, base frame, spring mounts, Limit switches, Marine lamp, Inspection door and all necessary accessories. All the Fan\"s should not exceed the noise level of 70dba at 1.0 m distance from the equipment.The unit shall be suitable for outdoor application with necessary weather hood, canopy and supports with necessary MS channels & threaded rods.The Motor shall be of TEFC, IP-55 protection, Class \"F\" insulation, motor shall be of IE-3 efficiency, suitable for 3 Phase, 415volts, 50hz power supply.
1954	For Isolation room exhaust & Procedure room exhaust ; Exhaust air fans to be considered with potentiometer and regulator switch for minimum 3 speed control
1955	4F TERRACE FLOOR
1956	1150 CFM- 50 mm wc. External Static Pressure : Serving Area (GF&1F-Toilet & DU)
1957	1200 CFM- 50 mm wc. External Static Pressure : Serving Area (GF,1F&2F-Toilet,Pantry & Linen)
1958	500- 50mm wc. External Static Pressure : Serving Area (GF,1F&2F-Toilet & DU)
1959	1900 CFM- 50 mm wc. External Static Pressure : Serving Area (GF,1F,2F&3F-Toilet & DU)
1960	750 CFM - 50mm wc. External Static Pressure : Serving Area (1F Toilet Exhaust air fan)
1961	2250 CFM- 50 mm wc. External Static Pressure : Serving Area (1F, 3F Toilet & DU Exhaust air fan)
1962	2400 CFM- 50 mm wc. External Static Pressure : Serving Area (1F 2F Toilet & DU Exhaust air fan)
1963	2000 CFM- 50 mm wc. External Static Pressure : Serving Area(3F Toilet Exhaust air fan)
1964	300 CFM - 30mm wc. External Static Pressure : Serving Area (3F Toilet Exhaust air fan)
1965	500 CFM- 40mm wc. External Static Pressure : Serving Area (3F-ETO Exhaust air fan)
1966	2950 CFM- 50mm wc. External Static Pressure : Serving Area (1F&2F-Toilet, Pantry)
1967	5F TERRACE FLOOR
1968	3150 CFM -65 mm wc. External Static Pressure : Serving Area (GF,1F&2F-Staff Change, Pantry & Linen)
1969	10200 CFM-65mm wc. External Static Pressure : Serving Area (GF to 4F-V.Toilet, Linen)
1970	1400 CFM -50mm wc. External Static Pressure: Serving Area (GF to 4F-Toilet)
1971	3650 CFM- 65mm wc. External Static Pressure: Serving Area (1F to 4F-Toilet, DU)
1972	3200 CFM- 65mm wc. External Static Pressure: Serving Area (1F to 4F-Toilet, DU)
1973	6950 CFM- 65mm wc. External Static Pressure: Serving Area (1F to 4F-Toilet, DU)
1974	6350 CFM- 65mm wc. External Static Pressure: Serving Area (1F, 3F to 4F-Toilet, DU)
1975	7850 CFM- 65mm wc. External Static Pressure: Serving Area (1F to 4F-Toilet, DU)
1976	9350 CFM- 65mm wc. External Static Pressure: Serving Area (GF to 4F-Toilet, DU)
1977	4200 CFM-50mm wc. External Static Pressure: Serving Area (GF to 4F-Linen & Pantry)
1978	6400 CFM-50mm wc. External Static Pressure: Serving Area (1F to 4F-Linen & Pantry)
1979	900 CFM-50mm wc. External Static Pressure: Serving Area (1F,3F&4F-Toilet)
1980	1200 CFM -50mm wc. External Static Pressure: Serving Area (1F to 4F-Toilet)
1981	ROOF FLOOR
1982	4500 CFM -50 mm wc. External Static Pressure : Serving Area (GF to 5F - Electrical Room)
1983	3900 CFM-50mm wc. External Static Pressure : Serving Area (GF to 5F - V.Toilet)
1984	450 CFM -50mm wc. External Static Pressure: Serving Area (3F-Toilet,DU&Pantry)
1985	4000 CFM- 50mm wc. External Static Pressure: Serving Area (2F - Linen Room)
1986	FLOOR MOUNTED CABINET TYPE FRESH AIR UNITS
1987	The Double skin Horizontal floor mounted cabinet type fan with 23±2mm thick PUF sandwiched insulated panel,CFC free polyurethane foam (PUF) panels of 40 Kg/cum density.Sandwitched between 0.6 mm thick G.I. Sheets. Outer skin shall be pre plasticized G.I. sheet and internal skin shall be powder coated G.I. Sheet with DIDW centrifugal fan with Backward curved aero foil impeller, IE-3 Motor, Pulleys, Belts & Belt guard, drive sets, base frame, spring mounts, Limit switches, Marine lamp, Inspection door and all necessary accessories. All the Fan\"s should not exceed the noise level of 70dba at 1.0 m distance from the equipment. Filters Section shall be with 50mm thick panel type pre-filter of MERV-8 as part of fresh air fan.
1988	The unit shall be suitable for outdoor application with necessary weather hood, canopy and supports with necessary MS channels & threaded rods.The Motor shall be of TEFC, IP-55 protection, Class \"F\" insulation, motor shall be of IE-3 efficiency, suitable for 3 Phase, 415volts, 50hz power supply.
1989	ROOF FLOOR
1990	3900Cfm - 50mm wc. External Static Pressure: Serving Area (GF to 5F - Electrical Room)
1991	3400 Cfm -40mm wc. External Static Pressure : Serving Area (2F - Linen Room)
1992	CEILING MOUNTED CABINET TYPE EXHAUST AIR UNITS
1993	The Double skin Horizontal ceiling mounted cabinet type fan with 23±2mm thick PUF sandwiched insulated panel,CFC free polyurethane foam (PUF) panels of 40 Kg/cum density.Sandwitched between 0.6 mm thick G.I. Sheets. Outer skin shall be pre plasticized G.I. sheet and internal skin shall be powder coated G.I. Sheet with DIDW centrifugal fan with Backward curved aero foil impeller, IE-3 Motor, Pulleys, Belts & Belt guard, drive sets, base frame, spring mounts, Limit switches, Marine lamp, Inspection door and all necessary accessories. All the Fan\"s should not exceed the noise level of 60dba at 1.0 m distance from the equipment.The Motor shall be of TEFC, IP-55 protection, Class \"F\" insulation, motor shall be of IE-3 efficiency, suitable for 3 Phase, 415volts, 50hz power supply.
1994	GROUND FLOOR
1995	8000 Cfm - 50 mm wc. External Static Pressure: Serving Area (Main electrical panel room exhaust air fan)
1996	3500 Cfm - 40 mm wc. External Static Pressure: Serving Area (Kitchen store exhaust air fan)
1997	CEILING MOUNTED CABINET TYPE FRESH AIR UNITS
1998	The Double skin Horizontal ceiling mounted cabinet type fan with 23±2mm thick PUF sandwiched insulated panel,CFC free polyurethane foam (PUF) panels of 40 Kg/cum density.Sandwitched between 0.6 mm thick G.I. Sheets. Outer skin shall be pre plasticized G.I. sheet and internal skin shall be powder coated G.I. Sheet with DIDW centrifugal fan with Backward curved aero foil impeller, IE-3 Motor, Pulleys, Belts & Belt guard, drive sets, base frame, spring mounts, Limit switches, Marine lamp, Inspection door and all necessary accessories. All the Fan\"s should not exceed the noise level of 60 dba at 1.0 m distance from the equipment. Filters Section shall be with 50mm thick panel type pre-filter of MERV-8 as part of fresh air fan.The Motor shall be of TEFC, IP-55 protection, Class \"F\" insulation, motor shall be of IE-3 efficiency, suitable for 3 Phase, 415volts, 50hz power supply.
1999	GROUND FLOOR
2000	6800 Cfm - 50 mm wc. External Static Pressure: Serving Area (Main electrical panel room fresh air fan)
2001	3000 Cfm - 40 mm wc. External Static Pressure: Serving Area (Kitchen store fresh air fan)
2002	2000 Cfm - 30 mm wc. External Static Pressure: Serving Area (AC Make up air fan)
2003	3000 Cfm - 40 mm wc. External Static Pressure: Serving Area (AC Make up air fan)
2004	1500 Cfm - 30 mm wc. External Static Pressure: Serving Area (AC Make up air fan)
2005	8100Cfm - 50 mm wc. External Static Pressure: Serving Area (Main kitchen fresh air fan)
2006	FLOOR MOUNTED CABINET TYPE FANS FOR LIFTLOBBY & STAIRCASE PRESSURIZATION
2007	The Double skin Horizontal ceiling mounted cabinet type fan with 23±2mm thick PUF sandwiched insulated panel,CFC free polyurethane foam (PUF) panels of 40 Kg/cum density.Sandwitched between 0.6 mm thick G.I. Sheets. Outer skin shall be pre plasticized G.I. sheet and internal skin shall be powder coated G.I. Sheet with DIDW centrifugal fan with Backward curved aero foil impeller, IE-3 Motor, Pulleys, Belts & Belt guard, drive sets, base frame, spring mounts, Limit switches, Marine lamp, Inspection door and all necessary accessories. All the Fan\"s should not exceed the noise level of 65 dba at 1.0 m distance from the equipment. Filters Section shall be with 50mm thick panel type pre-filter of MERV-8 as part of fresh air fan. The Motor shall be of TEFC, IP-55 protection, Class \"F\" insulation, motor shall be of IE-3 efficiency, suitable for 3 Phase, 415volts, 50hz power supply.
2008	4F TERRACE FLOOR
2009	11500 cfm - 50mm wc. Total Static Pressure : Serving area (Fire/Bed lift lobby Pressurization fan)
2010	5F TERRACE FLOOR
2011	11800 cfm - 50mm wc. Total Static Pressure : Serving area (Fire lift lobby/Bed lift Lobby / Service Lift Lobby Pressurization fan)
2012	ROOF FLOOR
2013	11800 cfm - 50mm wc. Total Static Pressure : Serving area (Passenger lift lobby-1/Bed lift Lobby / Doctor\"s Lift Lobby Pressurization fan)
2014	11800 cfm - 50mm wc. Total Static Pressure : Serving area (Passenger lift lobby-2 Pressurization fan)
2015	10000 cfm - 50mm wc. Total Static Pressure : Serving area (Staircase Pressurization fan)
2016	TUBE AXIAL TYPE- FRESH AIR & EXHUAST AIR FAN
2017	Long cased Smoke spill Tube Axial fan with AMCA certification (ForAIR, SOUND Performance & FEG) . The long casing shall comprise fan section with adjustable blade angles to deliver the design air quantity. The motor shall be suitable for outdoor ventilation application. The axial fan assembly shall be housed in acasing made of Mild Steel with enamel Painted, adjustable pitch die cast aluminum impeller (Hub and blades) with protective GI mesh. All the Fan\"s should not exceed the noise level of 70dba at 1.0 m distance from the equipment. The Motor shall be of TEFC, IP-55 protection, Class \"F\" insulation, IE-3 efficiency, suitable for 3 phase, 415volts, 50hz power supply. Fan position shall be as per the tender drawings .Note: All Fresh air fans MERV-8 Filters to be considered
2018	The unit shall be suitable for indoor application with necessary supports with necessary MS channels & threaded rods.
2019	SITE PLAN
2020	6400cfm -35mm wc. External Static Pressure : Serving area (PHE & Fire Pump Room Fresh Air Fan)
2021	7500cfm -35mm wc. External Static Pressure : Serving area (PHE & Fire Pump Room Exhuast Air Fan)
2022	6400cfm -35mm wc. External Static Pressure : Serving area (STP Fresh Air Fan)
2023	7500cfm -35mm wc. External Static Pressure : Serving area (STP Exhuast Air Fan)
2024	EXPLOSION PROOF INLINE FAN
2025	The supply & installation of explosion proof circular inline duct fan with all accessories like fan, motor, flanges, non-canvass type fire retardant flexible connections, etc.,The impeller shall be of forward type with backward curved blades and external motor rotors. The casing shall be made from conducting plastic. The cost shall inclusive of Explosion proof terminal box.The motor should be of IP44, class \"B\" insulation suitable for operating at 3 phase, 415V, 50hz power supply.
2026	500 CFM - 15mm wc. ESP. (BATTERY ROOM)
2027	RECTANGULAR INLINEAIR FAN - FRESH AIR FAN
2028	Double skin type Ceiling suspended units complete with double skin (25±2 mm) insulated with CFC free polyurethane foam (PUF) panels of 42 Kg/cum density. Sandwiched between 0.6 mm thick G.I. Sheets. Outer skin shall be preplastized G.I. sheet and internal skin shall be powder coated G.I. sheet. All the Fan\"s should not exceed the noise level of 70dba at 1.0 m distance from the equipment. The unit shall be provided with forward curved blower, Motor,inlet filter section with MERV-8filters, drive set & guard, spring isolator to avoid transmission of vibration,etc. The motor shall be with IP54 protection, class \"F\" insulation. Note: Fresh air fans serving AC make up air for AC units; MERV-8 Filters to be considered
2029	GROUND FLOOR
2030	AC make-up air fan for Dean & Superindent :400 CFM - 25mm wc. ESP
2031	SITE LEVEL
2032	Fresh air fan for OWC :1300 CFM - 25mm wc. ESP
2033	RECTANGULAR INLINEAIR FAN - EXHUAST AIR FAN
2034	Double skin type Ceiling suspended units complete with double skin (25±2 mm) insulated with CFC free polyurethane foam (PUF) panels of 42 Kg/cum density. Sandwiched between 0.6 mm thick G.I. Sheets. Outer skin shall be preplastized G.I. sheet and internal skin shall be powder coated G.I. sheet. All the Fan\"s should not exceed the noise level of 70dba at 1.0 m distance from the equipment. The unit shall be provided with forward curved blower, Motor,inlet filter section with MERV-8filters, drive set & guard, spring isolator to avoid transmission of vibration,etc. The motor shall be with IP54 protection, class \"F\" insulation.
2035	GROUND FLOOR
2036	1100 CFM- 25mm wc. External Static Pressure : Serving Area (Toilet & DU)
2037	600 CFM- 25mm wc. External Static Pressure : Serving Area (Toilet M & F)
2038	900 CFM- 25mm wc. External Static Pressure : Serving Area (HK Staff change (M)&(F))
2039	FIRST FLOOR
2040	800 CFM- 25mm wc. External Static Pressure : Serving Area (HK Staff change (M)&(F))
2041	SECOND FLOOR
2042	900 CFM- 25mm wc. External Static Pressure : Serving Area (Toilet (M) & Jan.)
2043	850 CFM- 25mm wc. External Static Pressure : Serving Area (Toilet (M) & Jan.)
2044	FOURTH FLOOR
2045	250 CFM- 10-15mm wc. External Static Pressure : Serving Area (Toilet )
2046	SITE LEVEL
2047	1500 CFM- 25mm wc. External Static Pressure : Serving Area (OWC )
2048	CIRCULAR INLINEAIR FAN - EXHAUST AIR FAN
2049	Double skin type Ceiling suspended - Circular inline fan complete with double skin (25±2 mm) insulated with CFC free polyurethane foam (PUF) panels of 42 Kg/cum density. Sandwiched between 0.6 mm thick G.I. Sheets. Outer skin shall be preplastized G.I. sheet and internal skin shall be powder coated G.I. sheet. All the Fan\"s should not exceed the noise level of 70dba at 1.0 m distance from the equipment. The unit shall be provided with forward curved blower, Motor,inlet filter section with MERV-8filters, drive set & guard, spring isolator to avoid transmission of vibration,etc. The motor shall be with IP54 protection, class \"F\" insulation.
2050	GROUND FLOOR
2051	250 CFM- 10-15mm wc. External Static Pressure : Serving Area (Toilet )
2052	200 CFM- 10-15mm wc. External Static Pressure : Serving Area (Toilet )
2053	FIRST FLOOR
2054	100 CFM- 5 mm wc. External Static Pressure : Serving Area (Toilet )
2055	GROUND FLOOR
2056	250 CFM- 10-15mm wc. External Static Pressure : Serving Area (Toilet )
2057	WALL MOUNTED PROPELLER TYPE FAN
2058	The supply & installation of wall mountable propeller type inline fan with all accessories like fan, motor, mounting frame, duct sleeve, protection guards,etc.,. The motor should be of IP21, class \"B\" insulation suitable for operating at 3 phase, 230V, 50hz power supply.
2059	GROUND FLOOR
2060	100 CFM- free static
2061	FIRST FLOOR
2062	100 CFM- free static
2063	125 CFM- free static
2064	SECOND FLOOR
2065	100 CFM- free static
2066	125 CFM- free static
2067	THIRD FLOOR
2068	125 CFM- free static
2069	FOURTH FLOOR
2070	100 CFM- free static
2071	TUBE AXIALFANS FOR EMERGENCY EXHUAST
2072	Long cased Smoke spill Tube Axial fan with AMCA certification (ForAIR, SOUND Performance & FEG) &EN certification as per EN12103-2015 standard. The Long casing shall comprise of adjustable blade angles to deliver the design air quantity. The axial fan assembly shall be housed in acasing made of Mild Steel with enamel painted, adjustable pitch die cast aluminum impeller (Hub and blades) and IE-3 Motor rated 250 deg C / 2 Hours for Smoke Evacuation & suitable for 415V/3Ph/ 50Hz AC supply (same motor to be used as tested & certified as per EN-12101-2015 certification). Fan position shall be as per the tender drawings. The Motor shall be of TEFC, IP-55 protection, Class \"H\" insulation, IE-3 efficiency, suitable for 3 phase, 415volts, 50hz power supply. Fan position shall be as per the tender drawings. All the Fan\"s should not exceed the noise level of 70dba at 1.0 m distance from the equipment.- EN certificate to be provide along with the technical submittals- AMCA certificate to be provided along with technical submittals.The unit shall be suitable for indoor application with necessary supports with necessary MS channels & threaded rods.
2073	4F TERRACE FLOOR
2074	3000 cfm - 40 mm wc. Total Static Pressure:Exhaust air fan - 3F NICU 5 BEDS, ICU 5 BEDS & PICU 5 BEDS
2075	3200cfm - 40mm wc. Total Static Pressure : Exhaust Air Fan- 3F ICCU 5 BEDS
2076	7200 cfm - 50mm wc. Total Static Pressure : Exhaust Air Fan- 3F OT-1
2077	5500 cfm - 50mm wc. Total Static Pressure : Exhaust Air Fan- 3F OT-2,3,4 &5
2078	5700 cfm - 50mm wc. Total Static Pressure : Exhaust Air Fan- 3F OT-6 & 9
2079	5300 cfm - 50mm wc. Total Static Pressure : Exhaust Air Fan- 3F OT-7 & 8
2080	5F TERRACE FLOOR
2081	3200cfm - 40mm wc. Total Static Pressure : Exhaust Air Fan- 3F SNCU 5 BEDS, RICU 5 BEDS, BURNS ICU 5 BEDS
2082	KITCHEN EXHAUST FAN - SISW CENTRIFUGAL FAN
2083	Supply Installation , Testing & commissioningof Double Skin Single inlet, single width ( SISW)limit load type, centrifugal fan suitable for Kitchen Hood Exhaust complete with casing, shaft, impeller with backward curved self-cleaning blades, TEFC squirrel cage induction motor conforming to IP 55 grade of protection, belt drive, belt guard,Dunlop cushy foot or eqvt. Anti-vibration mountings and all other accessories mounted on a common MS frame the fan shall be suitable for installation on Terrace Floor. Lownoise fan should be selected and Noise level should not exceed 70 to 75 DB when measured at 1.5 Meter .
2084	The motor should be selected for VFD Compatible type.The variable frequency drive shall also be the part of the contract.VFD shall be supplied with IP 21 Protection.The price shall also include the cost of VFD with all relevant accessories as specified in the document. The construction of the fan motor shall be of IP 42.The VFD shall be capable of regulating the speed of the Exhuast air fan from 120 % to 20% of rated Exhaustfan speed at the specifed rated flow & static. The VFD shall be capable of hooking to the BMS system . The price of VFD shall be quoted seperately.VFD should be supplied with Communication Card to transfer the necessary information from VFD to BMS System.All Hardware & Software required for integration should be part of scope.The details of the TEFU are given in the following order:Total airflow rate -CFM, Static pressure – mm wg, fan motor - KW & fan motor speed - rpm
2085	9000 CFM, 90 mmwg- External Static , 7.5 KW & 1450 rpm
2086	Supply & Installationof VFD which shall be housed in Exhaust fan Startel Panel. Starter panel shall be part of HVAC contactor scope.The Communication card to transfer the entire data available on VFD to the BMS System. VFD should have capacity to read cumulative KWH of energy consumption and not instantaneous value. VFD shall be Danfoss/ ABB /Emersion - HVAC drives
2087	Supply & Installationof Limit switch wiring ,lighting & motor interlock to be provided with 3 core 2.5sqmm cable in 19mm dia GI conduit
2088	ELECTROSTATIC DRY SCRUBBER FOR KITCHEN EXHAUST OF 9000 CFM.
2089	Supply, installation, testing & Commissioning of Electro- Static DRY scrubber for the above exhaust rating of 5900 CFM. The vendor shall include the Pressure drop to be 20mm Wg, works with necessary valve arrangement. The scope of supply should include complete system for Electrostatic Dry scrubber operation. It shall also include the carbon filters for residual carbon content removal.The Electrostatic Air Cleaners shall be supplied as a one-piece factory joined assembly of individual section(s) selected to treat oil mist, smoke, fume, grease & dust/ powder problems.Housing shall be constructed with minimum 1.6mm thick steel sheet with reinforced structure & powder coated to protect against rust and corrosion.It shall have a hinged door for cell access, located one side of the unit.The door shall be gasketed to prevent air leakage.There shall be a safety interlock switch to cut off primary supply when the access door is opened.The external finish shall be a durable industrial grade semi-gloss epoxy-polyester coating suitable for outdoor installations.
2090	Ionizing-Collecting cell(s) shall be of one-piece construction 13.38” (340mm) deep in direction of airflow.The dimension of the collection cell shall be 18.89” (480mm) H x 19.76” (502mm)W Max. All support framing, end plates and ionizer ground electrodes shall be 0.080 inch (2mm) thick aluminum.Both repelling and collector plates shall be 0.032 inch (0.8mm) thick aluminum alloy material rigidly retained in place with tubular spacers and tie rods. Each plate shall be corrugated, perpendicular to airflow direction.Spacing between plates shall be no less than 0.318 inch (8mm).Each cell shall weigh at least 17 kg with at least 8 stainless steel spiked blade ionizers. Tungsten wire ionizers will not be accepted.Ionizing spiked blade shall be made of Stainless steel 304 material, rigidly supported both vertically and laterally.Spiked ionizer to ground electrode spacing shall be 1.0\" (25mm). High voltage support insulators shall be of Teflon material for dielectric strength.
2091	Equipment should be selected on the basis of required Air handling capacity so as to achieve 90-95% particulate matter removal efficiency according to DOP Test or EN779 European standard (Equivalent to ASHRAE 52.1). Vendor should submit the Test report from the Lab having Test facility according to ASHRAE 52.2 or EN779. In the absence of Test report Vendor should demonstrate the efficiency claim at their manufacturing facility at their expenses.Power supplies shall be 100% solid state, operate on 230 VAC, 50 Hz, 1 Phase input and provide a dual high voltage output of 12-13 KVDC for the ionizer and6.0-6.5 KVDC for the collector in normal operation conditions. Current output at the high tension shall be 12mA. A maximum power output for the solid state power supply shall be 120 watts to maintain the specified collection efficiency.Integrally mounted Electrical interlocks shall be provided to prevent access to the high voltage components without first interrupting the primary input power.The power supply shall operate over a temperature range of -32 degrees F to 140 degrees F, be overloaded self-protecting and accommodate an LED lights indicating the performance status of the ionizing/collecting cell. High voltage output components in the power supply shall be sealed with epoxy for moisture resistance.
2092	The power pack shall incorporate a short circuit arc protection with automatic power restoration system to prevent overload.There shall be 2 LED lights (Green & Red) installed on the access door of the unit to indicate the status of the air cleaning system.BMS (Building Management System) interface: The power supply (pack) shall have a 2 wire dry contacts (NO/NC) for remote link to Building Management System. This is for performance indication of the air cleaning system.Supply , Installation , Testing & Commissioning of Electro-static Dry Scrubber unit complete with all sections as listed above & detailed in tender drawings.Supply, Installation, Testing & Commissioning & Handing over of the following:
2093	PART F-AIRSIDE WORKS
2094	SHEET METAL DUCTING WORKS
2095	G.S.S DUCTING AS PER SMACNA STANDARDSSheet Metal Work using with Duct mate Flanges for all sizes of the duct. Fabrication as per SMACNA Standards
2096	All ducting shall be of factory fabricated completely finished and transported to site in a boxed form (including the duct flange and the VAV transition pieces).GS sheet shall be Class VIII – with zinc coating of 120 gm / sqmt surface area. TDF type flanges with neoprene rubber gaskets of thickness to match the dimensions of the ducts shall be used for connecting two ducts. The cost of the duct shall include the threaded rod supports, angle flanges, anchor fastners, hot dipped galvanized bolts and nuts etc.,The Duct to be manufactured and assembled as per SMACNA standard for Class-500pascals. 26 G is recommended till 400mm duct sizes.
2097	Opening and closing for all the duct entries in civil / gypsum / any type of partition shall be under scope of HVAC vendor and inclusive of cost. Routing diagram can be checked in drawing prior for quoting.Pressure testing of sheet metal ducts with necessary components like semi-rigid flexible ducts, fans and the measuring kit. Pressure testing shall be carried out for complete air distribution system excluding flexible ducts, diffuser box, diffusers and grilles. Pressure testing shall be carried out prior to thermal insulation and as per SMACNA standards and approval shall be obtained from PMC and consultants.The Duct shall be supported with Hi-tech Supports at regular intervals as mentioned in the technical specifications.250 Pascals.
2098	Supply , Installation, Testing & Commissioning of below mentioned duct gauges
2099	24 G ( With Duct mate Flanges)
2100	22 G ( With Duct mate Flanges)
2101	20 G (With Duct mate Flanges)
2102	18 G (With Duct mate Flanges)
2103	G.S.S DUCTING FOR OPERATION THEATRES
2104	All ducting shall be of factory fabricated completely finished and transported to site in a boxed form (including the duct flange and the VAV transition pieces).GS sheet shall be Class VIII – with zinc coating of 180 gm / sqmt surface area. TDF type flanges with neoprene rubber gaskets of thickness to match the dimensions of the ducts shall be used for connecting two ducts. The cost of the duct shall include the threaded rod supports, angle flanges, anchor fastners, hot dipped galvanized bolts and nuts etc.,The Duct to be manufactured and assembled as per SMACNA standard for Class-500pascals. 26 G is not recommended.Opening and closing for all the duct entries in civil / gypsum / any type of partition shall be under scope of HVAC vendor and inclusive of cost. Routing diagram can be checked in drawing prior for quoting.Pressure testing of sheet metal ducts with necessary components like semi-rigid flexible ducts, fans and the measuring kit. Pressure testing shall be carried out for complete air distribution system excluding flexible ducts, diffuser box, diffusers and grilles. Pressure testing shall be carried out prior to thermal insulation and as per SMACNA standards and approval shall be obtained from PMC and consultants.
2105	24G. Ducting
2106	22G. Ducting
2107	20G. Ducting
2108	ALUMINIUM DUCTING FOR MRI
2109	All ducting shall be of factory fabricated finished and boxed duct only. The construction details of Aluminum ducting shall be similar to that of the GSS ducting as per SMACNA standards. The duct joints shall have Aluminum flanges only.
2110	24 gauge Aluminum
2111	22 gauge Aluminum
2112	SHEET METAL DUCT (STAINLESS STEEL-SS)
2113	SITC of factory fabricated SS304(MATT FINISH) Ducting with Flange ,The longitudinal joints to be TIG welded using SS welding rods and Tungsten Electrode ,SS ducting shall meet the requirements of Class 1000 Pascal\"s pressure class as per SMACNA, All duct accessories like bolts, nuts & washers, etc. shall also be of SS-304 for kitchen exhaust , as per Specification for flange sizes in specification document ( exhaust duct Gasket: fire retardant, rated at 60 deg C)(Each main branch shall have PITOT tube entry plugs provided by HVAC Vendor as part of duct supply to enable TAB agency to check air flow in the branch.Kitchen Exhaust air Ducting:
2114	1.0 MM(0-700)
2115	1.2 MM(701-1200)
2116	INSULATIONS WORKS
2117	WALL ACOUSTIC FOR AHU ROOMS
2118	Supply and installation ofWall Acoustic Insulation ofAHU rooms whichshall be done with GI frame work using 1mm thick formed channel and with 50mm thick rigid fiberglass board of density not less than 32kg/m³. and protected all around with 2 layers of RP tissue and finished with powder coated24G. GI perforated sheet of 30% perforation. The color of the paint will be suggested at a later date. Pre-Fabricated Panels of 600 x 600 mm (or size suiting site conditions) made out of GSS finished with RP Tissue & GI Perforated Sheet. The panel should be fixed to GI Grid workusing suitable thickness leaving a gap of 50 mm behind the panel
2119	THERMAL INSULATION FOR DUCTWORKS
2120	Supply and installation of Duct liner (Insulation) of specified thickness ofclosed cell Elastomeric Rubber insulation of Class \"O\" typemanufactured as per ASTM E 84 test & which should also meet NFPA 90A supplementary materials for air distribution systemwhich should not absorbs less 0.2% water by volume (ASTM c 209), should not support microbial growth (ASTM C1071, G21, G22) and should emit objectionable odors (ASTM C 665) and should have thermal conductivity of 0.27 ( R - 2.78 in 3.4\" thickness) and water vapor permeance of 0.10, Density 40-60kg/cum.
2121	13mm thick
2122	16mm thick
2123	ACOUSTIC INSULATION FOR DUCTWORKS
2124	Supply, erection of Duct liner (Acoustic Insulation) of specified thickness ofOpen cell Elastromeric Rubber Insulationwith antimicrobial protection manufactured as per ASTM E 84 test & which should also meet NFPA 90A supplementary materials for air distribution systemwhich should not absorbs less 0.2% water by volume . Adhesive shall be of low VOC preferably Fevicol ac duct king optima / equivalent.
2125	10mm thick
2126	UNDERDECK INSULATION
2127	Supply and installation Underdeck (Insulation) of specified thickness ofElastomeric Rubber Insulation manufactured as per ASTM E 84 test & which should also meet NFPA 90A supplementary materials for air distribution systemwhich should not absorbs less 0.2% water by volume (ASTM c 209), should not support microbial growth (ASTM C1071, G21, G22) and should emit objectionable odors (ASTM C 665) and should have thermal conductivity of 0.27 ( R - 2.78 in 3.4\" thickness) and water vapor permeance of 0.10. Joints should be sealed with 50 mm wide 3 mm thick self adhesive tape (Black Cotton Tape not acceptable). Class \"O\" Material
2128	25mm thick
2129	INSULATION OF EXPOSED DUCTS (TERRACE)
2130	Supply & installation of Thermal insulation of the sheet metal duct with aluminum foil faced closed cell elastomeric insulation of Class \"O\" material with density of 40 - 55 kg/cum as per the thickness mentioned below, with fire retardant adhesive and joints sealed with 3mm thick, 50mm wide nitrile rubber self adhesive tape all in accordance with technical specifications and with wrapping of fiber glass cloth & UV coating above the insulation properly finished and manufactured as per ASTM E 84 test & which should also meet NFPA 90A supplementary materials for air distribution systemwhich should not absorbs less than 0.2% water by volume. Adhesive shall be of low VOC preferably Fevicol ac duct king optima / equivalent./ SITC OF thermal insulation over the exposedduct with 50 mm termacool and bitumen to be appied as adhesive, further sand cement plaster to be done over the insulation.
2131	50 mm thick - external SA & RA ducting
2132	AIR TERMINAL DEVICES
2133	4 / 2 Way Square Diffusers
2134	Supply and installation of Powder coated, extruded aluminum, removable center core type, supplyair square diffusers with neck collar damper of aluminum construction of the following neck sizes.The diffuser shall be mounted in the GI box (not in scope), with inlet connector suitable for flexible duct. GI Box & Flexible duct quantified separately- SUPPLY AIR
2135	525 x 525 MM(Neck Size) outer size 600mm x 600mm
2136	450 x 450 MM(Neck Size) outer size 600mm x 600mm
2137	375 x 375 MM(Neck Size)outer size 600mm x 600mm
2138	300 x 300 MM(Neck Size)outer size 600mm x 600mm
2139	225x 225 MM(Neck Size)outer size 600mm x 600mm
2140	Supply and installation of Powder coated, extruded aluminum, removable center core type, return air square diffusers without neck collar dampers of the following neck sizes.The diffuser shall be mounted in the GI box (not in scope), with inlet connector suitable for flexible duct. GI Box & Flexible duct quantified separately- RETURN AIR
2141	525 x 525 MM(Neck Size) outer size 600mm x 600mm
2142	450 x 450 MM(Neck Size) outer size 600mm x 600mm
2143	375 x 375 MM(Neck Size)outer size 600mm x 600mm
2144	300 x 300 MM(Neck Size)outer size 600mm x 600mm
2145	225x 225 MM(Neck Size)outer size 600mm x 600mm
2146	Linear Slot diffusers
2147	Adjustable curved slot diffuser with aesthetically shaped face section, suitable for installation in false ceiling system.Comprising face sectionwith 1-4 slots, either with integral or additional slide on flanges, end caps (plates or angles) and with inset air control blades which can be used to provide any direction of air discharge.These blades are factory set but can be site adjusted by others to alter air discharge direction to meet local requirements.Complete with rear mounted plenum box fitted with side entry spigot and four suspension brackets to hang complete assembly from the ceiling.The slot diffuser has a variable neck length and depending on construction, the diffuser face section can be factory fitted to the plenum box or supplied separately for second fix on site.
2148	BUTTERFLY DAMPER - CIRCULAR - SINGLE FLAP-GI
2149	The Butterfly damper should constructed with not less than 0.8mm thick galvanized steel sheet, with single flap, necessary stopper, flanges, grooves for fixing flexible ducts as per specifications.
2150	Supply , Installation, Testing & Commissioning of below mentioned sizes
2151	150 mm dia
2152	200 mm dia
2153	250 mm dia
2154	300 mm dia
2155	350 mm dia
2156	INSULATED FLEXIBLE DUCTING
2157	Factory Fabricated Insulated Flexible made out aluminum for connecting from main duct to diffuser box. The length of the flexible duct shall be around 1.0 to 1.8 mtr.The flexible duct shall me made of triple lamination of aluminum foil, polyester and metalized polyester film permanently bonded to a coated spring steel wire helix.The exterior shall be wrapped with 25mm thick 16 kg / cum fiberglass insulation.The outer insulation jacket / vapor barrier made of fiberglass reinforced metalized polyester film laminate.The round flexible duct inner core should be made of triple lamination of Aluminum Foil, Polyester & Metalized polyester film permanently bonded to a coated spring steel wire helix. Fiberglass insulation shall be of 25mm thick with minimum density of 16 kg/m³. The outer insulation jacket vapor barrier shall be made of fiber glass reinforced metalized polyester film laminated with aluminum foil as per the technical specifications. BOth end connections shall be through double \"O\" rings.
2158	Supply , Installation, Testing & Commissioning of below mentioned sizes
2159	150 mm dia
2160	200 mm dia
2161	250 mm dia
2162	300 mm dia
2163	350 mm dia
2164	SPILL AIR BOXES - Expansion Plenum -For Square Diffusers
2165	The supply & installation of spill air boxes made out of 0.8mm thick GI sheet with necessary spigot connection for fixing flexible duct and suitable collar for connecting to various neck diffuser / slot diffuser.The box should be internally insulated with 6mm thick nitrile rubber. The box size shall be as mentioned below.The cost of insualtion shall be considered as integral part of spill air plenum box supply. Spill air plenum box shall have grooves for fixing flexible ducts.
2166	Box size of 525x525x450 mm and equivalent required rectangular sizes.
2167	Box size of 450x450x300 mm and equivalent required rectangular sizes.
2168	GRILLES
2169	200mm wide
2170	PATCH GRILLES
2171	Supply and installation ofPowder Coated grilles for Fresh air/Supply and exhaust Air distribution ( color for the grill to be confirmed by Arch/ PMC team before placing theorder)
2172	600 mm x 150mm
2173	750mm x 150mm
2174	750mm x 200mm
2175	1000mm x 200mm
2176	1000mm x 350mm
2177	1000mm x 600mm
2178	1200mm x 300mm
2179	600mm x 200mm
2180	400mm x 700mm
2181	350mm x 750mm
2182	250mm x 500mm
2183	450mm x 100mm
2184	400mm x 250mm
2185	400mm x 100mm
2186	300mm x 100mm
2187	250mm x 100mm
2188	POWDER COATED GRILLES FOR RETURN AIR DISTRIBUTION
2189	Supply and installation ofPowder Coated grilles for Return Air distribution (colour for the grill to be conifremed by Arch/ PMC team before placing the order). Sizes of standard patch grille to be as per HVAC drawings
2190	COLLAR DAMPER - OPPOSED BLADE TYPE
2191	Supply and installation of Collar Dampers of opposed blade type made out of Aluminum alloy extrusion with anodized matt black finish.The collar damper shall be constructed out of extruded aluminum alloy with multiple blade of oppose blade type. Shall be used for the Supply air diffuser & grilles as per the drawings & specifications.
2192	VOLUME CONTROL OPPOSED BLADE DAMPER (QUADRANT TYPE)
2193	Supply , Installation, Testing & Commissioning of Volume Control Dampers made out of 100 x 40 x 1.55 mm thick galvanized steel frame and blades of 1.55 mm galvanized sheet steel.The volume control damper shall be of low leakage type with the outer shell constructed of 1.6mm thick galvanized steel frame and the blade/Leaf with 1.6mm thick GSS. And with necessary flanges for connection etc., as per specification.
2194	SQUARE EXHAUST GRILLE
2195	Supply, Installation, Testing & Commissioning of Square type exhaust grille for toilet exhaust suitable to exhaust 150 to 200 cfm
2196	150mm x 150 mm
2197	DISC VALVES
2198	Supply and installation ofDisc Valves for Toilet Exhaust system suitable for 50 to 100 cfm with VCD- 150 dia
2199	150 mm dia
2200	UNINSULATED FLEXIBLE DUCTING
2201	Factory Fabricated Uninsulated Flexible made out aluminum for connecting from main duct to exhaust Grilles. The length of the flexible duct shall be around 1.0 to 1.5 mtr.Supply , Installation, Testing & Commissioning of below mentioned sizes
2202	150 mm dia
2203	MOTORIZED VOLUME CONTROL- LOW LEAKAGE AIR OPPOSED BLADE DAMPER
2204	Supply and installation of Motorized low leakage air dampers area with actuator for controlling Fresh air complete with all accessories like Actuator, control panel etc. and any necessary requirement which can perform the controlling the Damper. It shall be integrated with VFD
2205	The supply & Installation of the volume control damper with the outer shell constructed of 1.6mm thick galvanized steel frame and the blade/Leaf with 1.6mm thick GSS. And with flanges for connection. The Damper to be provided with necessary high torque Actuator working on 24V AC/DC. and control panel with step down transformer, indicator, provision for remote control operation & monitoring etc. Refer tender drawings for more details.
2206	ACTUATOR: The number of Actuator per damper is based on the number of damper required for the project as per drawing. However if the damper size exceeds 1.5sqmt, the number of actuator per damper can be selected 2 or more based on manufacturer selection and requirement for the smooth operation.
2207	Supply and installation of Actuators for above dampers with control panel
2208	LOUVERS - ALUMINIUM
2209	Supply and installation High grade aluminum extruded Louvers for Fresh air intake & Exhaust air exit at outer wall. The louver shall be of powder coated finish. The louver shall be with 45 deg deflection and shallprevent rain water entry through the louvers.High grade aluminum extruded Louvers for Fresh air intake with 20-micron washable filter suitable for external application. Louvers shall be powder coated finish.These louvers shall also be provided with bird mesh/ Insect screen
2210	AIR CURTAINS
2211	Supply & Installation of Air Curtains with limit switch suitable for operating in Single Phase, 230 V & 50 Hz power supply of the following sizes.
2212	1500mm (l) x 350(d)x 250mm(h)
2213	NON RETURN DAMPERS
2214	Supply, Installation, Testing & Commissioning of Non Return dampers. The Non Return damper with the outer shell constructed of 1.6mm thick galvanized steel frame and the blade/Leaf with 1mm thick aluminum. And with necessary flanges for connection and as per specifications.
2215	MOTORISED FIRE & SMOKE DAMPER WITH OPPOSED BLADE - EXTENDED SLEEVE TYPE - WITH 600 MM LONG
2216	Fire/Smoke Damper with motorized actuator including control panel and sensor made out of min 16 G Galvanized steel frame and with opposed blades of min 16 G galvanized steel sheet as per the layoutwith UL 555 Certification for minimum 90 minutes rating.
2217	FIRE DAMPER WITH OPPOSED BLADE (FUSIBLE LINK TYPE) -EXTENDED SLEEVE TYPE - WITH 450 MM SLEEVE
2218	The Fire damper as per CBRI standard, outer shell constructed with 1.6mm thick galvanized steel frameand the blade/Leaf with 1.6mm thick GSS. And with necessary flanges for connection as per specifications and drawings. The damper shall be of 90 min fire rating with Fusible Link & spring mechanism, The damper shall be held open by a replaceable fusible link rated at 74 deg C.
2219	SOUND ATTENUATORS FOR SUPPLY & RETURN AIR DUCTS @ AHU ROOM
2220	Air Ductleaving AHU Rooms(Used for Supply air duct )COMPUTER SELECTION SHOULD BE ATTACHED.Sound Attenuators of Dissipative type to be provided on the supply air duct entering the AHU Room.Sound Attenuators shall consist of outer casing, sound absorbing material and internal baffles, splitters and supports as explained in the technical specifications.Casing shall be of galvanized steel of not less than 20G in thickness. Casings shall be tested to 150mmwg and shall show no leakage or distortion in this condition.Sound absorbing material shall be high density RP Tissue held in place with at least 5% compression to prevent voids due to settling.Absorption material density shall be minimum 48 kg/cum.Fiberglass faced with minimum 26 g perforated galvanized sheet metal of minimum 40% open area. Combustion ratings shall be as explained in the tender specifications
2221	Supply
2222	Installation & commissioning
2223	CABLE TRAY FOR REFRIGERANT PIPING OF OT AHU\"S WITH DX CONDENSING UNITS
2224	Supply and installation of 300 (w)x 100 (d) x1.6 (thickness) Ms powder coated perforated Cable Tray with cover for Refrigerant copper piping outside the building. Color shall be approved by client and architect.
2225	Supply and installation of 100 (w)x 50 (d) x1.6 (thickness) Ms powder coated perforated Cable Tray without cover.
2226	AIR BALANCING & COMMISSIONING
2227	Entire Air Quantity to be Balanced as per the approved shop drawing using valid calibrated instruments.Few minimum instruments ACMV Vendor to consider in his scope in this package which he need to organize for testing and commissioning would be Air Flow HOOD which has capability to measure volumetric flow rate with digital manometer, multi point averaging air flow sensor, airflow measurement station
2228	Temperature & RH instruments, Water Balancing Devices to balance the entire water as per the schematic diagram
2229	Route Markers & Equipment tags for entire HVAC Equipment\"s
2230	SEQUENTIAL CONTROLLER
2231	Sequential controller with timer for sequence of operation based on maintenanceand temperature setpoints.
2232	FIRE SEALANT WORKS
2233	FIRE SEALANT FOR WALLS
2234	Supply & installation of Acrylic fire stop sealant (HILTI or approved equivalent) with minimum 2 hours fire rating when tested in accordance with UL 1479 standards, shall be used along periphery of ducts & chiller pipes without insulation passing through fire rated walls & floors made of concrete, masonry, metal, gypsum construction to provide up to 2 hours insulation & integrity when subject to the test conditions of UL 1479 standards. Product should be tested for mold resistance as determined by ASTM G21-96 & shall have a VOC content of approx. 75 g/l as per LEED 2009. All installations to be in full accordance with the manufacturer. The sealant should be tested in accordance with IEC 60068-2-57:1999-11 (Environmental Testing) as per Part 2-57: Test for Vibration-Time-history method and VERTEQII for seismic zone 4. Product shall bear the UL & FM approval. Rate shall include the mineral wool backing material and other miscellaneous items etc..,Supply, Installation, Testing & Commissioning & Handing over of the following:
2235	PART G -LOWSIDE PIPING WORKS
2236	CHILLED WATER PIPINGGeneral Note The scope includes :
2237	Supply, installation, testing, flushing, balancing and commissioning of entire chilled water piping network. Water Balancing shall be carried out 2 times and Flushing shall be carried out 3 times.
2238	CHILLED WATER SIDE
2239	CHILLED WATER PIPING WITH INSULATIONAND ALLIED WORKS - RISERS & LOWSIDE
2240	Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled/Hot water piping inside the building (with necessary clamps, vibration isolators ,bends, tees, reducers, flanges etc. and including MS supports with C-channel/ L-angle and U-clamps, anti-vibrationand fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / m3 density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class ‘O’ insulation applied by suitable adhesive complete including repairing of damage to building etc. as per specifications and as required complete in all respect.Note:-The Pipes of sizes 150 mm & below shall be M.S. \"C\" class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.
2241	Fitting accessories for installation of pressure gauges, thermometers, BMS sensors,drain ports to be provided by the HVAC low sidecontractor. Fluorescent Plastic Sticker/ paint shall be applied to indicate Water flow directions. Only End flanges to be used for capping of pipes.\"Table E\" of BS code for flange thickness to be adhered. Costing shall be including the Procyon protective coating that shall be used over the insulated surfaces for mechanical protection and UV protection. Polyurethane coating to be applied over all internal elastomeric nitrile rubber insulation.Pipe dia below 150 mm shall be C Class confirming to IS:1239 (part 1) 2004,Pipe size between 200 mm to 350 mm dia shall be 6.35 mm & pipe dia above 350 mm shall be 8.0 mm confirming to IS:3589 Gr330.Opening and closing for all the chiller pipe entries in civil / gypsum / any type of partition shall be under scope of HVAC vendor and inclusive of cost. Routing diagram can be checked in drawing prior for quoting.
2242	250 mm dia MS Pipes (32mm Insulation)
2243	200 mm dia MS Pipes (32mm Insulation)
2244	150 mm dia MS Pipes (32mm Insulation)
2245	125 mm dia MS Pipes (32mm Insulation)
2246	100 mm dia MS Pipes (32mm Insulation)
2247	80 mm dia MS Pipes (32mm Insulation)
2248	65 mm dia MS Pipes (32mm Insulation)
2249	50 mm dia MS Pipes (32mm Insulation)
2250	40 mm dia MS Pipes (32mm Insulation)
2251	32 mm dia MS Pipes (19mm Insulation)
2252	Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications
2253	BUTTERFLY VALVE WITH INSULATION
2254	The BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN-16 pressure rating for chilled water/hot water circulation as specified, companion flanges shall also be of PN16 rating. Butterfly valves installed for the chilled water pipelines shall be insulated with nitrile rubber insulation and the insulation thickness shall be similar to that of the pipe dimensions. (valve sizes above 200mm shall be wheel operated type instead of handles). All bolts, washers and nuts shall be hot dipped galvanized only.
2255	125 mm dia
2256	100 mm dia
2257	80 mm dia
2258	65 mm dia
2259	50 mm dia
2260	32 mm dia
2261	BALL VALVE WITHOUT STRAINER WITH INSULATION
2262	Supply,Installation Testing and Commissioning ofthe following Ball Valves without strainer duly insulated as per specifications and drawings. It shall be bronze forged body construction with chrome plated bronze ball and handle of stainless steel constructions.The ball valves with long stem, handles and threaded joints shall be of PN16 class and insulated with nitrile rubber. Draining of the pipes is considered under this line item.
2263	32mm dia
2264	25mm dia
2265	BALL VALVE WITH STRAINER WITH INSULATION
2266	Supply,Installation Testing and Commissioning ofthe following Ball Valves with Strainer duly insulated as per specifications and drawings. It shall be bronze forged body construction with chrome plated bronze ball and handle of stainless steel constructions.The ball valves with handles and threaded joints shall be of PN16 class and insulated with nitrile rubber.
2267	32mm dia
2268	25mm dia
2269	MANUAL BALANCING VALVE WITH INSULATION
2270	BALANCING VALVE (Manual Type) - PN16 rating. BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN-16 pressure rating for chilled / hot water circulation as specified.BALANCING VALVE (Manual Type) - PN16 rating.Balancing valves installed for the chilled water pipelines shall be insulated with 25mm thick nitrile rubber insulationThe valve should be with factory calibrated with +/- 5% flow accuracy. Provided with necessary measuring port, drain port, flanges hot dipped galvanized bolts, washers and nuts etc.,The balancing to be done by portable hand held device and same result should be furnished in the handing over manual.The rate quoted shall include the cost of the water balancing through automated tools supplied by the valve manufacturer.The size of the valve indicated below are provisional and shall be confirmed by the manufacturer / tenderer.
2271	125mm dia
2272	100mm dia
2273	80mm dia
2274	65mm dia
2275	50mm dia
2276	DRAIN VALVES
2277	32 mm dia Ball Valve for Riser chilled water piping
2278	PRESSURE INDEPENDENT TYPE DYNAMIC BALANCING CUM FLOW CONTROL VALVE.
2279	Supply installation, testing & commissioning of Two Way high rangaeability/ pressure independent dynamic balancing cum control valve fitted with motorized, modulating actuators with linear stroke of minimum 15mm, in chilled water lines at each air handling unit, the actuator shall have shut off capability of minimum 4 Bar rating. the actuator shall be controlled by building automation system & should accept a signal of 4-20mA/2-10 VDC. The valve shall be suitable for following flow rates & conforming to specification. The digital electronic controller with LCD display capable of accepting 0-10V DC signal from BMS & Water Temperature signals from the coil inlet & outlet sensors conforming to detailed specifications. all other accessories i.e Sensors-3 No. 230V/24VAC power Supply 1 No. thermowell-1 No. should be included in thsi item.
2280	Pressure Independent dynamic balancing cum equal percentage type modulating flow control valve fitted with high torque actuator with spring return to ensure the valve closes automatically in the event of power disconnect to actuator. Actuator enclosure shall be rated for IP 54 protection. Step down transformer if required shall be part of valve supply, matching flanges, hot dipped galvanized bolts and nuts. Valve body to be insulated with closed cell elastomeric insulation. Supply , Installation, testing & commissioning of thermostat along with control/ power cabling to be part of scope.
2281	Actuator should be provided with position feed back switch and also actuator should have BMS interfacing card and shall be suitable for accepting signals from temperature sensors supplied by BMS vendor. Actuator should also have facility to set the required flow rate as per site requirements through dip switch adjustments. Valve body to be rated for PN 16. The valve design flow rate should be factory calibrated with +/- 5% flow accuracy.Valve shall have necessary measuring ports, drain port, flanges etc., The balancing to be done through microprocessor based hand held terminal / POT andthe same results shall be furnished in the water balancing report as part of commissioning report and handing over manual.Valve selection to be submitted in the technical submittal for approval before procurement.
2282	80 mm Dia
2283	65 mm Dia
2284	50 mm Dia
2285	32 mm Dia
2286	Y\"-STRAINER WITH INSULATION
2287	Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation as specified. strainer
2288	80 mm Dia
2289	65mm dia
2290	50mm dia
2291	32 mm Dia
2292	AUTOMATIC AIR VENT.
2293	Automatic air vent to be provided at all high location of piping. The air vent to be provided with necessary ball valve.
2294	32 mm Dia
2295	25mm. Dia
2296	THERMOMETER (TEMPERATURE GUAGES)
2297	The Thermometer shall be of Dial type (100mm)Range 0° to 50°C, with stainless steel body - IP 55 protection, with necessary thermowell\"s.
2298	THERMOWELL PROVISION
2299	Thermowell with the length of 3/4th of the pipe dia.
2300	TEST POINT
2301	Supply Installation testing and commissioning of test points for measuring chilled water pressure and temp.Test Point shall be of brass construction, 1/4\" BSP with NEOPRENE sealing bushes and shall beprovided with screwed cover.
2302	TEST POINT MEASURING INSTRUMENT
2303	supply & installation of dial type pressure & Temperature gauge with extended probe used for taking pressure & temperature measurements in liquid flow lines carrying non-corrosive fluids using portable instruments made out of brass body & connection size of 1/4\".
2304	PRESSURE GAUGE (GLYCERINE FILLED)
2305	The Pressure Gauge shall be ofBourdon tube Dial type (100mm) Range 0 to 10 kg/cm², with stainless steel body - IP55 protection with necessary pipe fitting and needle valve etc.,
2306	INSULATED CONDENSATE DRAIN PIPE
2307	Supply, Installation, testing, commissioning of Rigid heavy class CPVC piping complete withfittings, supportsas perspecifications anddulyinsulatedwith9 mmthick closed cell crosslinked polyethylene (XLPE) tubular insulation.Vapour barrier coating,antifungus and with26 gauge sheet aluminum cladding shall be applied to insulated drain pipework coming in contact with atmospheric conditions (i.e. outside the air conditioned area)Thermal Conductivity: Less than 0.037 w/m.K at 0 DEG C (as per BS 874 Part 2 1986 or DIN 52613) Water vapor permeability: As per Din 52615, shall not exceed 0.15ng/m.sec.pa, Piping shall be properly supported on, or suspended from, stands, clamps, and hangers as specified and as required. The Contractor shall adequately design all the brackets, saddles, clamps and hangers and be responsible for their structural sufficiency complete with accessories. Exposed/External drain pipes shall be covered with vapor barrierand protective coating as per specifications.
2308	65mm. Dia.
2309	50mm. Dia.
2310	40mm. Dia.
2311	32mm. Dia.
2312	25mm. Dia.
2313	DRAIN VALVE WITH EXTENDED STEM FOR AHU\"S & CSU\"S
2314	25 mm dia
2315	PURGE/DRAIN VALVE FOR CHILLED WATER PIPING
2316	Supply , Installation, Testing & Commissioning of below mentioned sizes
2317	12mm dia
2318	DIGITAL THERMOSTATS
2319	Supply, installation, testing and commissioning of digital Thermostats with display for AHU\"s, CSU\"S,FCU\"s
2320	CONTROL CABLING
2321	Supply, installation of Control Cabling with conduit between thermostat to AHU\"S /CSU\"S/FCU\"s/TFA
2322	CONDENSATE DRAIN PUMP
2323	Supply, installation, testing & commissioning of drain pump for each ceiling suspended AC units as per the discharge requirement. Note- Drain pump should be installed near the CSU/ FCU. Provision of Electrical supply (Single phase) should be from HVAC Starter panel.
2324	MILD STEEL SUPPORTS
2325	Supply, installation of Steel Supports for various purposes in supporting system.( for supporting piping works)
2326	Supply
2327	Testing, Installation & Commission
2328	FLUSHING
2329	Flushingof chilledwaterpipingto achieverequiredwater quality(as per Chillermanufacturerrecommendation) with required water & chemicals .
2330	Supply, Installation, Testing & Commissioning & Handing over of the following:
2331	PART H-VRV & DX SYSTEM
2332	VARIABLE REFRIGERANT FLOW SYSTEM
2333	Supply of Variable Refrigerant Flow modular type airconditioning system complete with indoor and out door units with individual corded controller and centralized controller with refrigerant piping, control cabling as per detail given in specifications and having following items: Centralised controller quantified seperately. VRF system to be supplied with BACNETIP inferface for integration with Centralised BMS.These units also need to equiped with third party integrator /Card . Units to be having inbuilt thermostat for sensing the Supply/ return air temperature.
2334	VRF INDOOR UNITS
2335	VRF INDOOR UNIT(IDU): Supply,Istallation, testing and Commissioning of VRF Indoor Units including necessary insulated UPVC Drain piping upto the nearest floor drain, Cordless remote control unit, Thermostatic control & controlwires from the control unit to IDUs, Power cabling/wiring from the nearest power socket, Digital Thermostats for each IDU etcas per specifications complete All theIndoor units should be supplied with Cordless remote controls. The following Indoor unit capacities are required for each Floor. All indoor indoor units to supplied with fitting accessories like rubber pads/ vibration isolators , anchor fasteners with complete supporting system . Noise level to be published at 1.5m when the unit is ON condition at full speed.Digital thermostats and safety controls,Installation accessories, mounting brackets, filters, drier etc.CFD Analysis to verify the rising temperature due to stacking of units above each other and wind resistance at the higher floors. Final Out door unit capacities shall be based on the result of CFD analysis, Indoor units as per the drawings with mounting brackets/supports,All indoor units shall have anticorrosive coating.Indoor Unit(IDU): All the units should be supplied with Cordless/Corded remote controls. The following Indoor unit capacities are required for each Floor.
2336	5F-TERRACE-MODULE -1 : 13.5 TR, 16HP
2337	GROUND FLOOR
2338	Serving Area: Hub RoomCapacity: 5.5TR/2047 CFM Ceiling mounted Ducted unit
2339	FIRST & SECOND FLOOR
2340	Serving Area: Hub RoomCapacity: 4TR/1377 CFM Ceiling mounted Ducted unit
2341	5F-TERRACE-MODULE -2 : 15.6 TR, 20HP
2342	THIRD FLOOR
2343	Serving Area: Hub RoomCapacity: 5.5TR/2047 CFM Ceiling mounted Ducted unit
2344	FOURTH FLOOR
2345	Serving Area: Hub RoomCapacity: 4.55TR/1624 CFM Ceiling mounted Ducted unit
2346	FIFTH FLOOR
2347	Serving Area: Hub RoomCapacity: 5.5TR/2047 CFM Ceiling mounted Ducted unit
2348	OUTDOOR UNITS
2349	Supply,Istallation, testing and Commissioning of Modulating outdoor units, with multi scroll R410/R407 refrigerant compressors (minimum two compressors) with one capacity controlling compressor and other constant (OR Variable speed type compressor) speed type compressor,refrigerant fill foradditionallength asrequired, special pre-coated fins, panel, corrosion resistantcoated condenser, inverter based condenser fan M.S. hot dip galvanisedstands / supports, electrical & microprocessor panel, isolating valves, Power cable from Unit to Isolator, Communication cable from ODU to all the indoor units and all the necessary accessories for proper functioning of the units, having following approximate capacities.Note : Fins and copper tubes of Air Cooled Condenser alongwith copper tubing / piping with all joints and U-Bends exposed to coastal areas corrosive atmosphere / aggressive ambient, shall be painted with special corrosion prevention coating(2 coats of epoxy primer and 2 coats of epoxy paint) either in factory or at site. The outdoor units to be mounted with proper grouting with rubber pads/ vibration isolators. outdoor unit shall have bly-gold coating.
2350	16HP - Out door unit
2351	20HP - Out door unit
2352	INSTALLATION, TESTING & COMMISSIONING OF VRV WORKS
2353	Supply & Installation of copper piping with necessay imported fittings, Ruf nut-joints and headers etc.(This includes the pressure testing and refrigerant charge and electrical & Control cable between IDU&ODU and MCB(provided by others) to ODU etc). Interconnecting copper refrigerant pipe work duly insulated with elastomeric nitrile rubber typetubular insulation betweenindoor & outdoor units as per specifications . Cost shall include Covered cable tray with required UV painting for exposed pipe works and for pipingrunning through shafts. Piping inside the room shall be properly supported with hangers and required accessories. The vendor shall quote as a lumpsum value as per the approved drawing for the above works. Incase any changes in the layout after approval, then the following unit rates shall be applicable.
2354	REFRIGERANT PIPING
2355	Supply & Installation of interconnecting following sizes ofrefrigerant copper pipe work of following outer diameter, insulated with 19/13 mm thick closed cell electrometric Nitrile rubber tubular insulation between each set of indoor & outdoor units . The pipe dia upto 19mm shall be soft seamless & above 19mm dia shall be hard seamless . All piping inside the room shall be properly fixed/supported with suitable size of clamp/ M.S. hanger and all external piping shall run in GI. cable tray (Price Extra) etc. as reqd.
2356	28.6mm OD (insulation =13 mm thick)
2357	19.1mm OD (insulation =13 mm thick)
2358	15.9mm OD (insulation =13 mm thick)
2359	12.7mm OD (insulation =13 mm thick)
2360	9.5mm OD (insulation =13 mm thick)
2361	Transmission & Control Wiring
2362	Providing & fixing control cum trans-mission wiringthru PVC Conduitbetween indoor and out door unit.
2363	(2 core x 1.0 Sq mm cu.cable )
2364	Control cabling for corded Remotes thru PVC Conduit
2365	(2 Core x 1.0 sqmm)
2366	Supply, installing, testing & commisioning of Y-Joints for refrigerant pipes as per manufacturer standards & requirement and all y joints should be properly insulated with specified thickness in technical specifications.Thermal Conductivity:Less than 0.037 w/m.K at 0 DEG C (as per BS 874 Part 2 1986 or DIN 52613) Water vapour permeability: As per Din 52615, shall not exceed 0.15ng/m.sec.pa, Piping shall be properly supported on, or suspended from, stands, clamps, and hangers as specified and as required. The Contractor shall adequately design all the brackets, saddles, clamps and hangers and be responsible for their structural sufficiency complete with accessories,Exposed/External ref nut shall be covered with vapor barrier and protective coating as per specifications.
2367	INSULATED CONDENSATE DRAIN PIPING- VRF UNITS
2368	HDPE PVC pipe of following sizes for drain with necessary supports and fittings.
2369	40 mm dia
2370	32 mm dia
2371	CONDENSATE DRAIN PUMP
2372	Supply, installation, testing & commissioning of drain pump for each ceiling suspended AC units as per the discharge requirement. Note- Drain pump should be installed near the CSU/ FCU/ HI Wall units. Provision of Electrical supply (Single phase) should be from HVAC Starter panel.
2373	CABLE TRAY FOR VRF UNITS
2374	Providing & fixing of Covered cable tray with GI Sheet cover for exposed piping of the following size:
2375	(300mm X 50mm X 50mm)
2376	SEQUENTIAL CONTROLLER
2377	Sequential controller with timer for sequence of operation based on maintenanceand temperature setpoints.
2378	DX TYPE DUCTABLE CEILING MOUNTED UNITS WITH INVERTER COMPRESORS
2379	Supply, Installation and commissioning of DX TYPE DUCTABLE CEILING MOUNTED AC UNITS with IDU\"s/ODU\"s and copper piping with necessay fittingsfittings,(This includes the pressure testing,refrigerentcharging and electrical & Control cable between IDU&ODU & commissioning with electrical feeder.(provided by others) . The compressor to be inverter based and refrigerant piping length to be suitable from indoor to oudoor for a maximum of 25-30 Rmt. The vendor shall quote as a lumpsum value as per the approved drawing for the above works. Incase any changes in the layout after approval, then the following unit rates shall be applicable.These units shall be equiped with a controller compatible to integration with third party BMS with Open/Modbus/ N2 protocol. Parameters required are - ON/OFF control, ON/OFF/TRIP status, Room temp., Room Humidity. Refrigerant used shall be R-134a /R-407c or CFC free refrigerants.These units also need to equiped with third party integrator /Card . Units to be having inbuilt thermostat for sensing the return air temperature
2380	8.5 TR-3400CFM-DX DUCTABLE TYPE CSU - External static -25mmwg- GF-MRI -UPS Room
2381	Hard drawn copper pipe with 7/8\" dia suction line & 3/8\" dia liquid line pipe The suction & liquid line shall be insulated with 9mm thick sleeveless nitrile rubber insulation.The rateshall be inclusive of Electrical & Control cable between IDU & ODU/ MCB ( Provided by others) -Refrigerant pipe 1 Rmt = 1 Rmt of liquid line + 1 Rmt of suction line
2382	Installation & Commissioning of all items listed above
2383	Temperature Sensor with Display to be provided and to be BMS Compatible
2384	3.0 TR-1200 CFM Ceiling mounted Duct Type unit- External static -15mmwg GF Battery Room
2385	Hard drawn copper pipe with 5/8\" dia suction line & 3/8\" dia liquid line pipe The suction & liquid line shall be insulated with 9mm thick sleeveless nitrile rubber insulation.The rateshall be inclusive of Electrical & Control cable between IDU & ODU/ MCB ( Provided by others) -Refrigerant pipe 1 Rmt = 1 Rmt of liquid line + 1 Rmt of suction line
2386	Installation & Commissioning of all items listed above
2387	Temperature Sensor with Display to be provided and to be BMS Compatible
2388	5.5 TR-2200 CFM Ceiling mounted Duct Type unit- External static -25mmwg GF MRI
2389	Hard drawn copper pipe with7/8\" dia suction line & 3/8\" dia liquid line pipe The suction & liquid line shall be insulated with 9mm thick sleeveless nitrile rubber insulation.The rateshall be inclusive of Electrical & Control cable between IDU & ODU/ MCB ( Provided by others) -Refrigerant pipe 1 Rmt = 1 Rmt of liquid line + 1 Rmt of suction line
2390	Installation & Commissioning of all items listed above
2391	Temperature Sensor with Display to be provided and to be BMS Compatible
2392	11 TR-4400CFM-DX DUCTABLE TYPE CSU - External static -25mmwg- GF-MRI & CT Equipment Room
2393	Hard drawn copper pipe with 2-1/8\" dia suction line & 1/2\" dia liquid line pipe The suction & liquid line shall be insulated with 9mm thick sleeveless nitrile rubber insulation.The rateshall be inclusive of Electrical & Control cable between IDU & ODU/ MCB ( Provided by others) -Refrigerant pipe 1 Rmt = 1 Rmt of liquid line + 1 Rmt of suction line
2394	Installation & Commissioning of all items listed above
2395	Temperature Sensor with Display to be provided and to be BMS Compatible
2396	17 TR-6800CFM-DX DUCTABLE TYPE CSU - External static -25mmwg- GF-UPS Room
2397	Hard drawn copper pipe with 2-1/8\" dia suction line & 5/8\" dia liquid line pipe The suction & liquid line shall be insulated with 9mm thick sleeveless nitrile rubber insulation.The rateshall be inclusive of Electrical & Control cable between IDU & ODU/ MCB ( Provided by others) -Refrigerant pipe 1 Rmt = 1 Rmt of liquid line + 1 Rmt of suction line
2398	Installation & Commissioning of all items listed above
2399	Temperature Sensor with Display to be provided and to be BMS Compatible
2400	MS STANDS
2401	Supply installationand testing of MS stand for ODU units..Structure shall be self standing. The quoted price shall be include transportation, lifting shifting of material at terrace.
2402	INSULATED CONDENSATE DRAIN PIPING-DX UNITS
2403	HDPE PVC pipe of following sizes for drain with necessary supports and fittings.
2404	50 mm dia
2405	32 mm dia
2406	25 mm dia
2407	CABLE TRAY FOR DX UNITS
2408	Providing & fixing of Covered cable tray with GI Sheet cover for exposed piping of the following size:
2409	(300mm X 50mm X 50mm)
2410	P.H. WORKSupplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipesconforming topipe fittings of the following nominal bore with clamps including making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge
2411	20mm dia C - PVC pipe
2412	Ground Floor
2413	First Floor
2414	Second Floor
2415	Third Floor
2416	Fourth Floor
2417	Fifth Floor
2418	25mm dia C - PVC pipe
2419	Ground Floor
2420	First Floor
2421	Second Floor
2422	Third Floor
2423	Fourth Floor
2424	Fifth Floor
2425	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.
2426	32mm dia PVC pipe
2427	Ground Floor
2428	First Floor
2429	Second Floor
2430	Third Floor
2431	Fourth Floor
2432	Fifth Floor
2433	40mm dia PVC pipe(Top Floor)
2434	50mm dia PVC pipe(Top Floor)
2435	Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge.
2436	15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
2437	15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)
2438	15mm dia CP Short body bib cock (Jaquar Make)CON-CHR-037KN
2439	15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
2440	Pillar cock(Jaquar-Madi series)FLR-CHR-5031N
2441	Elbow action Bib cock(Jaquar)FLR-SSF-5043N
2442	20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make)
2443	20mm dia brassfull way valve (Shakti make)
2444	25mm dia brassfull way valve (Shakti make)
2445	32mm dia brassfull way valve (Shakti make)
2446	40mm dia brassfull way valve (Shakti make)
2447	50mm dia BFW Valve (Shakti make)
2448	15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
2449	15mm CP Extension piece
2450	125mm CP grating
2451	supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge.
2452	Ground Floor
2453	First Floor
2454	Second Floor
2455	Third Floor
2456	Fourth Floor
2457	Fifth Floor
2458	Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-charge
2459	Ground Floor
2460	First Floor
2461	Second Floor
2462	Third Floor
2463	Fourth Floor
2464	Fifth Floor
2465	Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
2466	Ground Floor
2467	First Floor
2468	Second Floor
2469	Third Floor
2470	Fourth Floor
2471	Fifth Floor
2472	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge.
2473	110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
2474	75mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
2475	110mm U-PVC‘P’ Trap(Ori Plast/Finolex/Supreme Make)
2476	110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
2477	110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
2478	75mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
2479	110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
2480	110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
2481	110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)
2482	110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
2483	110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make)
2484	110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)
2485	110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
2486	Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI \"p\" or \"s\" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
2487	580mm size Orissa pan (Hindware/Parryware/Neycer make)
2488	Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
2489	10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
2490	Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal
2491	Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral \"p\" or \"s\" trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
2492	European water closet with \"p\" trap plain(Hindware/Parryware/Neycer make)
2493	Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
2494	Under Counterbasin(560x450)Hindware-No.10095
2495	550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with 22” x 16” pedestal
2496	Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge
2497	600 x 450 x 250mm size S/S kitchen sink (Jayana make )
2498	Wall mounted Scrub Unit
2499	Laboratory Sink 450x300x150 mm
2500	Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
2501	25mm x 600mm long CP towel rail(Jaquar)ACN-ACR-1111N
2502	CP towel Ring(Jaquar)ACN-ACR-1121N
2503	Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
2504	600 x 125mm plate glass shelf with CP guard rails(Jaquar)AKP-CHR-35771P
2505	Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge
2506	600mmx450mm size B.E mirror (swivelled type)
2507	Large size mirror with frame(303x0.90x0.90)
2508	Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
2509	CP soap holder (Jaquar)ACN-ACR-1131N
2510	SOAP DISPENSER WITH GLASS BOTTLE (Jaquar)ALD-BCH-769L250X190MI
2511	Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.
2512	15mm CP revolving shower (Jaquar)CON-CHR-209KN
2513	Differently Abled series (6nos)
2514	Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
2515	550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal
2516	Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
2517	600mmx450mm size B.E mirror (swivelled type)
2518	Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge.One piece commod(Hindware)ELEMENT Cat No.92084.
2519	CP soap holder (Jaquar)ACN-ACR-1131N
2520	SOAP DISPENSER WITH GLASS BOTTLE (Jaquar)ALD-BCH-769L250X190MI
2521	CP towel Ring(Jaquar)ACN-ACR-1121N
2522	Grab bar (Jaquar make) WAC - WHT - BAI 090
2523	450MM long Grab bar (Jquar make)AHS - CHR - 1507
2524	Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
2525	Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
2526	Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site.
2527	Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
2528	Ground Floor
2529	Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
2530	Ground Floor
2531	First Floor
2532	Second Floor
2533	Third Floor
2534	Fourth Floor
2535	Fifth Floor
2536	Supplying the waterproofing material Pidifin 2K of Dr.fixit on equivalent water proofing material and appling in two coat over the concrete floor and dado upto 1\"-6\" in wall including cleaning,applying and mending as per specification including all labour charges as per direction of Engineer-in-charge.
2537	(Floor Tiles)
2538	Ground Floor
2539	First Floor
2540	Second Floor
2541	Third Floor
2542	Fourth Floor
2543	Fifth Floor
2544	(Wall Tiles)
2545	Ground Floor
2546	First Floor
2547	Second Floor
2548	Third Floor
2549	Fourth Floor
2550	Fifth Floor
2551	Supplying all materials, labour, T&P and filling in sunken floor in toilets with cinter (light weight slag) well watered and rammed include conveyance of all materials to worksite payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.
2552	Ground Floor
2553	First Floor
2554	Second Floor
2555	Third Floor
2556	Fourth Floor
2557	Fifth Floor
2558	Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed seriesto be pre-approved by the Engineer-in-charge )
2559	Ceramic tile 30cmx30cm
2560	Ground Floor
2561	First Floor
2562	Second Floor
2563	Third Floor
2564	Fourth Floor
2565	Fifth Floor
2566	Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
2567	Ground Floor
2568	First Floor
2569	Second Floor
2570	Third Floor
2571	Fourth Floor
2572	Fifth Floor
2573	Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge )
2574	Glazed tile 30cmx45cm
2575	Ground Floor
2576	First Floor
2577	Second Floor
2578	Third Floor
2579	Fourth Floor
2580	Fifth Floor
2581	Granite Tiles for Under Counter Basin and Kitchen
2582	Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finishstructural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material,The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre\"s standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. 680x0.75x2.10=
2583	Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigmentscomplete in all respect as per specification and direction of the Engineer in charge680x4.95=
2584	Supplying all materials labor T&P and fitting & fixing 10mm thick Granite partition wall or screen wallincluding cutting grooves and mending good the damages with cement concrete (1:2:4) using 12mm size hard granite chipsincludingwatering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complate as per specification and direction of the Engineer in charge
2585	Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-charge
2586	Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
2587	Supplying all materials ,labour ,T&P and constructing gully trap chamber ofinside size 250mmx250mmwith 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinthand inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI gratingetc.all complete as per drawing,specification and direction of Engineer-in-charge
2588	Construction of 40000 Litr.Capacity RCC Over head water storage tank(Domestic & Fire fighting)-In Fifth floor
2589	R.C.C. work of M-30 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge.
2590	RCC in Column
2591	RCC in roof beam
2592	RCC inroof slab
2593	RCC Wall
2594	Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. includingbending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyancesof M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
2595	Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance and royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
2596	Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.
2597	Priming one coat with water bound wall cement primer.
2598	Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, all materials, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.
2599	Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and balustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.
2600	Providing fitting and fixing MS cover made out of MS angle and sheet duly welding and fixing with frame and hinges along with locking arrangement of size 60cmx60cm etc complete as per direction of Engineer-in-charge
2601	Wall painting two coats with Weather coat paint (1st quality) exterior grade of approved make & with a approved quality primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance,cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.
2602	Construction of 10000 Liters RCC Over head Tank of Inside size- 4.10 X 2.10 X1.50m- In Fifth floor
2603	R.C.C. work of M-30 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge.
2604	RCC in Column
2605	RCC in roof beam
2606	RCC inroof slab
2607	RCC Wall
2608	Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.
2609	Supplying all materials, labour,T&P and providing 6mm thick cement plasster (1:4) overCC workincluding watering curring and conveyance of all materialsto site.
2610	Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.
2611	Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and balustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.
2612	Providing fitting and fixing MS cover made out of MS angle and sheet duly welding and fixing with frame and hinges along with locking arrangement of size 60cmx60cm etc complete as per direction of Engineer-in-charge
2613	Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS UV of size 750x570x1350mm height with water storage capacity 120 liters along with 3 nos of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all completeas per approved drawing,specification and direction of the Engineer in charge.
2614	Aquagurd Pure Chill 120 PSS UV
2615	Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasingincluding concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.
2616	100mm dia u-pvc pipe alround concrete
2617	150mm dia u-pvc pipe alround concrete
2618	200mm dia u-pvc pipe alround concrete
2619	Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification.
2620	MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover )
2621	Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
2622	Construction of 200000 Liters RCC Under ground Reserver of Inside size- 12.00 X 8.00 X2.30m
2623	Earth work in excavation of foundation in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift includingrough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.
2624	-do- with Ist additional depth of 1.50 m over the initial lead and lift
2625	Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer incharge.
2626	Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
2627	R.C.C. work of M-30 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge.
2628	Base slab
2629	Long wall
2630	Short wall
2631	Roof Slab
2632	Middle wall
2633	Beam
2634	Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.
2635	Supplying all materials, labour,T&P and providing 6mm thick cement plasster (1:4) overCC workincluding watering curring and conveyance of all materialsto site.
2636	Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.
2637	Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and balustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.
2638	Providing fitting and fixing RCPCcoveretc complete as per direction of Engineer-in-charge
2639	Supply all materials, labour, T&P and providing, fitting and fixing of centrifugal pump set to run on 3phase/1phase line voltage ranging from 320 volt to 450 volt with suitable control pannel, jointing with GI/ PVC/ HDPE pipes electrification, testing,commissioning,trial running,conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.
2640	5 HP 3 phaseHorizontal submerssiblepump set.
2641	DOL control panel
2642	Labour charges for lowering, testing, commissioning & transportation to site etc.
2643	Supplying all materials, labour, T&P and providing and laying in trenches PVC ASTM pipeof the following nominal bore, tube fittings, testing all complete as per specification and direction of the Engineer in charge
2644	75mm dia PVC ASTM
2645	50mm dia PVC ASTM
2646	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipesof the following nominal bore and pipe fittings with clamps including making good the wall and testing as per specification and direction of the Engineer in charge
2647	50mm dia CPVCpipe (sch-80)
2648	Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift includingrough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.
2649	Supplying all materials, labour T&P and fitting and fixing brass/CP/PVC fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.
2650	50mm dia Brass N. R. Valve
2651	50mm dia Brass Check Valve
2652	50mm dia Brass F. W. Valve
2653	Supplying all materials, labour, T&P and construction of Fullway valve chamber/Stop cock chamber of the following inside size for fullway valve with cement concrete slab (1:2:4) mix , 7.50cm thick, foundation concrete (1:5:10) and inside plastering with cement mortar (1:3) finished with a floating coat of neat cement including curing etc all complete as per approved specification and direction of the Engineer in charge
2654	Inside size 250mm x 250mm x 560mm
2655	Rain water harvesting.-2 Nos.
2656	Sinking of tube well through D.T.H.Rig.
2657	200mm dia- 0.0m to 30.00m
2658	Lowering of PVC casing pipe inside bore.
2659	200mm dia- 0.0m to 30.00m
2660	Cost.of 200mm dia (Sch.80)Pipe
2661	Cutting slot in casing pipe for recharge of rain water
2662	Labour for packing graveloutside the tube well
2663	Cost of washed gravel.
2664	Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift includingrough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.
2665	Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
2666	Supplying all materials, labour, T&P and providing brick work with Fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:6) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
2667	Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
2668	Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
2669	Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
2670	Supplying all materials, labour, T&P and providing reinforced cement concrete work of M-25 grade with 20mm and down grade black hard granite crusher broken stone chips including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
2671	Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
2672	Providing and filling filter media
2673	40mm size bolder
2674	20mm size washed gravel
2675	Course sand
2676	Providing fitting and fixing M.S.grill,Jalli cover over the harvesty pindi
2677	Supplying all materials, labour, T&P and constructionman hole chamber of the following sizewith cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
2678	Inside size 910mm x 910mm x 910mm
2679	Addl depth
2680	Cost of RCPC Cover
2681	Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasingincluding concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.
2682	160mm dia u-pvc pipe alround concrete
2683	200mm dia u-pvc pipe alround concrete
2684	Sinking of 200mmx150mm dia Bore Well through DTH method.- 2 Nos.
2685	Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
2686	Drilling of 200mm dia bore0 to 30 mtr
2687	Drilling of 200mm dia bore31 to 45 mtr
2688	Drilling of 150mm dia bore41 to 125 mtr
2689	Labour for lowering the following size of PVC casing pipes with or without slotted pipes as per necessity from ground level upto 300 mtrs depth and fitted and set up in perfectly vertical position including cutting and threading of blank pipes and slotted pipes and supplyinging and fixing of all jointing materials ,extra sockets and T&P etc. all complete and keeping the top of casing pipe threaded including plugging the tubewell to prevent entry of foreign materials
2690	Lowering of 200mm dia PVC casing pipes 0 mtr to 30 mtrs
2691	Lowering of 200mm dia PVC casing pipes 31 mtr to 45 mtrs
2692	Cost of 200mm dia PVC schedule - 80 pipe
2693	Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
2694	Supplying all materials,labour,T&P andproviding around sealing by cement concrete grouting of annualr space around GI/PVC housing pipe upto 5 mtr below ground level ( as per drawing ) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer-in-charge . Mimimum one meter of casing pipe to nserted in the bore in to the rock the bottom to ensure sanitary sealing ( excluding cost of cement which willbe supplied by the Department )
2695	Sanitary sealing upto 5 mtr below ground level
2696	CC(1:2:4) with 12mm chips for grouting up to 5 mtr Depth in
2697	1x5x3.14x(0.15-0.10)
2698	Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing,commissioning,trial running,conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.
2699	5HP Three Phase 5 stage submersible pump set.
2700	DOL control panel
2701	50mm S. S. Nipple, S. S. bolt & clips
2702	50mm M. S. Clamp, Bend, Socket & 200mm M. S. well cap
2703	2.50mm Sqm Submersible flat cable
2704	Steel rope with cover
2705	20mm dia rigid U-PVC pipe
2706	50mm dia HDPE pipe
2707	Labour charges for lowering, testing, commissioning & transportation to site etc.
2708	RO System - 3000 LPH
2709	Waterkraft Intensity (Deluxe 3000 LPH R.O System)
2710	Pree Filtration System for (3000 LPH Deluxe R.O System)
2711	Raw Water Tank (5000 ltrs 3 Layer)
2712	Fresh Water Storage Tank (2000 ltrs)
2713	Post Micronic Filter with U.V Sterilization System
2714	Raw Water / Fresh Water Tank Automization Device
2715	Plumbing Work, Electrical Work, Pipes & Pipe Fitting
2716	S.S. Skid for 2000 Lph Fresh Water Tank
2717	S.S. Skid for 5000 Lph Fresh Water Tan
2718	BAR SCREEN CHAMBER
2719	Earth work inexcavation IN ALL TYPES OF SOILS bymanual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan)inculding disposalof excavated earth up to50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of thewater pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.
2720	Earth work inexcavation IN ALL TYPES OF SOILS by manual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan)inculding disposalof excavated earth up to50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of thewater pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.+1.5m extra lift.
2721	Supplying & Filling foundation trenches , plinth & ditches withclean course river sand well watered and rammed inlayers not exceeding23 c.m.indepthwith all lead and lift including cost, conveyance, loading, unloading, stacking,royalties and alltaxes of sand,cost & conveyance of water, cost of all Labour,labour ess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge.
2722	Providing and laying plain cement concrete of M-15 proportion (1:2:4) in foundation and floors using 12mm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete including cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.
2723	Back filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m.etc. complete in all respect as directed by the Engineer- in -charge.
2724	Disposal of surplus excavted materials by mechanical means from the work side etc. complete. upto 5km. Lead
2725	R.C.C. work of M-25 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge.
2726	Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. includingbending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyancesof M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
2727	Supplying all materials, labour, T&P and providing 450mm dia x 50mm thick RCPC man hole cover in cement concrete (1:2:4) using 12mm size h.g chips, placing the cover on the man hole/ inspection chamber and finishing smooth all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification anddirection of the Engineer in chargeR.C.P.C. Cover(20\"/22\" round Man hole cover)
2728	OIL & GREASE TANK
2729	Earth work inexcavation IN ALL TYPES OF SOILS bymanual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan)inculding disposalof excavated earth up to50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of thewater pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.
2730	Earth work inexcavation IN ALL TYPES OF SOILS by manual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan)inculding disposalof excavated earth up to50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of thewater pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.+1.5m extra lift.
2731	Supplying & Filling foundation trenches , plinth & ditches withclean course river sand well watered and rammed inlayers not exceeding23 c.m.indepthwith all lead and lift including cost, conveyance, loading, unloading, stacking,royalties and alltaxes of sand,cost & conveyance of water, cost of all Labour,labour ess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge.
2732	Providing and laying plain cement concrete of M-15 proportion (1:2:4) in foundation and floors using 12mm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete including cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.
2733	Back filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m.etc. complete in all respect as directed by the Engineer- in -charge.
2734	Disposal of surplus excavted materials by mechanical means from the work side etc. complete. upto 5km. Lead
2735	R.C.C. work of M-25 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge.
2736	Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. includingbending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyancesof M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
2737	Supplying all materials, labour, T&P and providing 450mm dia x 50mm thick RCPC man hole cover in cement concrete (1:2:4) using 12mm size h.g chips, placing the cover on the man hole/ inspection chamber and finishing smooth all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification anddirection of the Engineer in chargeR.C.P.C. Cover(20\"/22\" round Man hole cover)
2738	GRIT TANK
2739	Earth work inexcavation IN ALL TYPES OF SOILS bymanual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan)inculding disposalof excavated earth up to50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of thewater pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.
2740	Earth work inexcavation IN ALL TYPES OF SOILS by manual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan)inculding disposalof excavated earth up to50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of thewater pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.+1.5m extra lift.
2741	Supplying & Filling foundation trenches , plinth & ditches withclean course river sand well watered and rammed inlayers not exceeding23 c.m.indepthwith all lead and lift including cost, conveyance, loading, unloading, stacking,royalties and alltaxes of sand,cost & conveyance of water, cost of all Labour,labour ess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge.
2742	Providing and laying plain cement concrete of M-15 proportion (1:2:4) in foundation and floors using 12mm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete including cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.
2743	Back filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m.etc. complete in all respect as directed by the Engineer- in -charge.
2744	Disposal of surplus excavted materials by mechanical means from the work side etc. complete. upto 5km. Lead
2745	R.C.C. work of M-25 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge.
2746	Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. includingbending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyancesof M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
2747	Supplying all materials, labour, T&P and providing 450mm dia x 50mm thick RCPC man hole cover in cement concrete (1:2:4) using 12mm size h.g chips, placing the cover on the man hole/ inspection chamber and finishing smooth all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification anddirection of the Engineer in chargeR.C.P.C. Cover(20\"/22\" round Man hole cover)
2748	EQUALIZATION TANK
2749	Earth work inexcavation IN ALL TYPES OF SOILS bymanual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan)inculding disposalof excavated earth up to50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of thewater pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.
2750	Earth work inexcavation IN ALL TYPES OF SOILS by manual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan)inculding disposalof excavated earth up to50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of thewater pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.+1.5m extra lift.
2751	Supplying & Filling foundation trenches , plinth & ditches withclean course river sand well watered and rammed inlayers not exceeding23 c.m.indepthwith all lead and lift including cost, conveyance, loading, unloading, stacking,royalties and alltaxes of sand,cost & conveyance of water, cost of all Labour,labour ess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge.
2752	Providing and laying plain cement concrete of M-15 proportion (1:2:4) in foundation and floors using 12mm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete including cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.
2753	Back filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m.etc. complete in all respect as directed by the Engineer- in -charge.
2754	Disposal of surplus excavted materials by mechanical means from the work side etc. complete. upto 5km. Lead
2755	R.C.C. work of M-25 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge.
2756	Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. includingbending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyancesof M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
2757	Supplying all materials, labour, T&P and providing 450mm dia x 50mm thick RCPC man hole cover in cement concrete (1:2:4) using 12mm size h.g chips, placing the cover on the man hole/ inspection chamber and finishing smooth all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification anddirection of the Engineer in chargeR.C.P.C. Cover(20\"/22\" round Man hole cover)
2758	COLLECTION TANK
2759	Earth work inexcavation IN ALL TYPES OF SOILS bymanual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan)inculding disposalof excavated earth up to50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of thewater pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.
2760	Earth work inexcavation IN ALL TYPES OF SOILS by manual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan)inculding disposalof excavated earth up to50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of thewater pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.+1.5m extra lift.
2761	Supplying & Filling foundation trenches , plinth & ditches withclean course river sand well watered and rammed inlayers not exceeding23 c.m.indepthwith all lead and lift including cost, conveyance, loading, unloading, stacking,royalties and alltaxes of sand,cost & conveyance of water, cost of all Labour,labour ess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge.
2762	Providing and laying plain cement concrete of M-15 proportion (1:2:4) in foundation and floors using 12mm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete including cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.
2763	Back filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m.etc. complete in all respect as directed by the Engineer- in -charge.
2764	Disposal of surplus excavted materials by mechanical means from the work side etc. complete. upto 5km. Lead
2765	R.C.C. work of M-25 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge.
2766	Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. includingbending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyancesof M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
2767	Supplying all materials, labour, T&P and providing 450mm dia x 50mm thick RCPC man hole cover in cement concrete (1:2:4) using 12mm size h.g chips, placing the cover on the man hole/ inspection chamber and finishing smooth all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification anddirection of the Engineer in chargeR.C.P.C. Cover(20\"/22\" round Man hole cover)
2768	SLUDGE HOLDING TANK
2769	Earth work inexcavation IN ALL TYPES OF SOILS bymanual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan)inculding disposalof excavated earth up to50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of thewater pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.
2770	Earth work inexcavation IN ALL TYPES OF SOILS by manual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan)inculding disposalof excavated earth up to50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of thewater pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.+1.5m extra lift.
2771	Supplying & Filling foundation trenches , plinth & ditches withclean course river sand well watered and rammed inlayers not exceeding23 c.m.indepthwith all lead and lift including cost, conveyance, loading, unloading, stacking,royalties and alltaxes of sand,cost & conveyance of water, cost of all Labour,labour ess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge.
2772	Providing and laying plain cement concrete of M-15 proportion (1:2:4) in foundation and floors using 12mm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete including cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.
2773	Back filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m.etc. complete in all respect as directed by the Engineer- in -charge.
2774	Disposal of surplus excavted materials by mechanical means from the work side etc. complete. upto 5km. Lead
2775	R.C.C. work of M-25 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge.
2776	Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. includingbending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyancesof M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
2777	Supplying all materials, labour, T&P and providing 450mm dia x 50mm thick RCPC man hole cover in cement concrete (1:2:4) using 12mm size h.g chips, placing the cover on the man hole/ inspection chamber and finishing smooth all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification anddirection of the Engineer in chargeR.C.P.C. Cover(20\"/22\" round Man hole cover)
2778	CLARIFIED WATER TANK
2779	Earth work inexcavation IN ALL TYPES OF SOILS bymanual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan)inculding disposalof excavated earth up to50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of thewater pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.
2780	Earth work inexcavation IN ALL TYPES OF SOILS by manual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan)inculding disposalof excavated earth up to50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of thewater pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.+1.5m extra lift.
2781	Supplying & Filling foundation trenches , plinth & ditches withclean course river sand well watered and rammed inlayers not exceeding23 c.m.indepthwith all lead and lift including cost, conveyance, loading, unloading, stacking,royalties and alltaxes of sand,cost & conveyance of water, cost of all Labour,labour ess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge.
2782	Providing and laying plain cement concrete of M-15 proportion (1:2:4) in foundation and floors using 12mm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete including cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.
2783	Back filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m.etc. complete in all respect as directed by the Engineer- in -charge.
2784	Disposal of surplus excavted materials by mechanical means from the work side etc. complete. upto 5km. Lead
2785	R.C.C. work of M-25 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge.
2786	Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. includingbending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyancesof M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
2787	Supplying all materials, labour, T&P and providing 450mm dia x 50mm thick RCPC man hole cover in cement concrete (1:2:4) using 12mm size h.g chips, placing the cover on the man hole/ inspection chamber and finishing smooth all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification anddirection of the Engineer in chargeR.C.P.C. Cover(20\"/22\" round Man hole cover)
2788	TREATED WATER TANK
2789	Earth work inexcavation IN ALL TYPES OF SOILS bymanual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan)inculding disposalof excavated earth up to50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of thewater pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.
2790	Earth work inexcavation IN ALL TYPES OF SOILS by manual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan)inculding disposalof excavated earth up to50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of thewater pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.+1.5m extra lift.
2791	Supplying & Filling foundation trenches , plinth & ditches withclean course river sand well watered and rammed inlayers not exceeding23 c.m.indepthwith all lead and lift including cost, conveyance, loading, unloading, stacking,royalties and alltaxes of sand,cost & conveyance of water, cost of all Labour,labour ess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge.
2792	Providing and laying plain cement concrete of M-15 proportion (1:2:4) in foundation and floors using 12mm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete including cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.
2793	Back filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m.etc. complete in all respect as directed by the Engineer- in -charge.
2794	Disposal of surplus excavted materials by mechanical means from the work side etc. complete. upto 5km. Lead
2795	R.C.C. work of M-25 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge.
2796	Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. includingbending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyancesof M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
2797	Supplying all materials, labour, T&P and providing 450mm dia x 50mm thick RCPC man hole cover in cement concrete (1:2:4) using 12mm size h.g chips, placing the cover on the man hole/ inspection chamber and finishing smooth all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification anddirection of the Engineer in chargeR.C.P.C. Cover(20\"/22\" round Man hole cover)
2798	REACTOR WATER TANK
2799	Earth work inexcavation IN ALL TYPES OF SOILS bymanual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan)inculding disposalof excavated earth up to50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of thewater pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.
2800	Supplying & Filling foundation trenches , plinth & ditches withclean course river sand well watered and rammed inlayers not exceeding23 c.m.indepthwith all lead and lift including cost, conveyance, loading, unloading, stacking,royalties and alltaxes of sand,cost & conveyance of water, cost of all Labour,labour ess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge.
2801	Providing and laying plain cement concrete of M-15 proportion (1:2:4) in foundation and floors using 12mm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete including cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.
2802	Disposal of surplus excavted materials by mechanical means from the work side etc. complete. upto 5km. Lead
2803	R.C.C. work of M-25 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge.
2804	Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. includingbending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyancesof M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
2805	Supplying all materials, labour, T&P and providing 450mm dia x 50mm thick RCPC man hole cover in cement concrete (1:2:4) using 12mm size h.g chips, placing the cover on the man hole/ inspection chamber and finishing smooth all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification anddirection of the Engineer in chargeR.C.P.C. Cover(20\"/22\" round Man hole cover)
2806	ULTRA FILTRATION WATER STOAGE TANK
2807	Earth work inexcavation IN ALL TYPES OF SOILS bymanual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan)inculding disposalof excavated earth up to50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of thewater pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.
2808	Earth work inexcavation IN ALL TYPES OF SOILS by manual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan)inculding disposalof excavated earth up to50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of thewater pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.+1.5m extra lift.
2809	Supplying & Filling foundation trenches , plinth & ditches withclean course river sand well watered and rammed inlayers not exceeding23 c.m.indepthwith all lead and lift including cost, conveyance, loading, unloading, stacking,royalties and alltaxes of sand,cost & conveyance of water, cost of all Labour,labour ess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge.
2810	Providing and laying plain cement concrete of M-15 proportion (1:2:4) in foundation and floors using 12mm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete including cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.
2811	Back filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m.etc. complete in all respect as directed by the Engineer- in -charge.
2812	Disposal of surplus excavted materials by mechanical means from the work side etc. complete. upto 5km. Lead
2813	R.C.C. work of M-25 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge.
2814	Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. includingbending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyancesof M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
2815	Supplying all materials, labour, T&P and providing 450mm dia x 50mm thick RCPC man hole cover in cement concrete (1:2:4) using 12mm size h.g chips, placing the cover on the man hole/ inspection chamber and finishing smooth all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification anddirection of the Engineer in chargeR.C.P.C. Cover(20\"/22\" round Man hole cover)
2816	COMBINED SEWAGE TREATMENT PLANT
2817	Design, supplying,installing, testing& commissioningof Sewage TreatmentPlant (excludingexcavation, back filling & disposal of surplus earth MS/Civil construction work) for the following duty:Nature of effluent-Sewage from MCH, DHH including OT, Staff Quarter, kitchen.Daily average flow - 300 Cum / DaypH - 7.5 – 8.5BOD5 - 250 – 400 Mg/LS. Solids - 200 – 450 Mg/LCOD - 600 – 800 Mg/LOil & Grease - 50 Mg / LEffluent discharge standard after treatmentpH - 6.0 – 8.5BOD5 - Less than 10 Mg/LS. Solids - Less than 10 Mg/LCOD - Less than40 Mg/LOil & Grease - Less than 1 Mg / L
2818	Sewage treatment plant shall include the following items:Sewage Collection SumpScreen chamber Oil and Greace Chamber Grit TankSewage equalization tank/sumpAeration tankClarifier tank ( secondary + tube setller) Sludge holding tankChlorine contact tankTreated Water TankAir Blowers, Pumps & equipmentPiping, valves etcTertiary treatment plantElectrical Panel & Cabling
2819	Supply, installation, testing & commissioning of 2 Nos Stainless Steel Perforated, CorrugatedBar Screen with suitable lifting arrangement (size 1200 mm widex 1000 mm high approx)
2820	Supply of MS hot dip galvanized puddle flanges in accordance to BS:10 table D as required to be provided (in the structural slab and wall) of various diameters. Puddle flanges shall be provided for all the structural component of the STP. The installation of the puddle flanges shall be carried out by the Civil contractor in accordance to the Civil GA drawing (to be prepared by the STP contractor) at the required levels& position; under the supervision of the STP contractor
2821	Supply of plastic manhole step/foot rest (@ 300 mm c/C) with polypropelene compound injection molded around 12 mm dia (Fe-415) steel reinforcing bar. Provision of the foot rest is envisaged in various tanks/ components of the STP for the purpose of accessability. The installation of the foot rest shall be done by the civil contractor as per civil GA drawing
2822	Supply, installation, testing & commissioning of CI medium duty rectangular manhole cover with frame for the feasibility of access in the tank
2823	Size : 600 x 900 (175 kg)
2824	Supply of vent pipes of 100 mm dia with mosquito proof grating suitable for the ventilation purpose of the various tanks
2825	Supply, installation, testing & commissioning of electronic typelevel indicator and controller for automatic operation of the system with high/low level alarm complete with auxillary NO/NC contacts.
2826	Contractor shall ensure submission of detailed GA drawings (Plan & Section), P & I diagram, schematic diagram for the above mentioned component and additional component if so required for the complete working of the STP.
2827	Supply, installation, testing & commissioning of Submersible Sewage pumps capableofhandlingsolidsupto 38 mm having SS casing& SS impeller completewithallaccessories,motor of required capacity,Pressure gauge on delivery line with isolationcock,levelcontroller (withwiring) to controlthelevelofsump automatically.Pumpsshall have following duty: MAKE- WILO/GRUNDFOS
2828	SubmersibleSumpPumps to transfer sewage from collection sump to Screen chamber(2 Nos. – 1working &1 standby) :- MAKE- WILO/GRUNDFOS.(Solid handling size for this pump shall be 40 mm).Flow rate (each)=15m3/hr.Head =12 Mtr
2829	Sewage Transfer Pump to transfer sewage from EQT to Reactor Tank (2 Nos- 1 working & 1 Standby) MAKE- WILO/GRUNDFOS.(Solid handling size for this pump shall be 20 mm).Flow rate (each)=15m3/hr.Head =12 Mtr.Cost shall be inclusive of PVCflexible Hose pipe (for piping submeged in effluent) with M S epoxypiping (for piping non-submerged in effluent).Provision of guide ropes to guide submersible pump from upper levelto operational level in sump basin with channels / angle section of MSEP shall be made by the STP contractor.Contractor is requested to submit quote rate for above pumps with CI Casing & SS impeller,material of construction.
2830	Air diffusionsystemshall include the following:
2831	2Nos. twin Lobe type rotaryair blowers(One working&one standby) capable ofdelivering 400 m3/hr of free air at10 PSIG driven through “V” belt ordirectly coupled through flexible coupling to a TEFCmotor of 10 HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles A/C supply. MAKE- AKASH BLOWERS
2832	Air piping shall comprise of pipesdroppers/ laterals withM S (epoxy coated) Header complete with all fittingssuch as tees,crosses, plugs, sockets, elbows, reducers, supports&clamps, puddle flanges etc cutting chases& making good. Contactor to submit detailed P & I indicating their proposal
2833	Non clog type airdispersion systemcapable of handling 3-5cfm of airwithoxygen transferefficiency of3-4% per/meterwaterdepth.Air dispersion gridshall be assembled in modular formso thatthey canbe replaced / repaired easily from plat form at the top. (Imported fine bubble membrane diffusers).NOTE : Airdispersion systemshall be provided for EQT, Reactor Tank & Sludge Holding Tank.
2834	Providing MBBR Media & Tube Settler Media with MSEP rack support with required quantity & as per the specific make.
2835	Providing and fixing all piping (as described below) and isolation control valves for making the system complete.
2836	MS Epoxy: Air piping & pumped effluent riser (non-submerged)
2837	PVC piping: Pumped effluent (submerged) & tank overflow pipe line
2838	Supply, installation, testing & commissioning of poly electro type dosing system & Alum Dosing comprising of 100 ltrs HDPE/FRP tank with 0-6 lph electronic metering type pump and SS agitator complete with motor.
2839	Designing, supplying, providing, fixing, testing and commissioning of STP as mentioned above.
2840	Supplying,installing, testing& commissioningofhorizontal / vertical centrifugal filter feed waterpumps & Back wash Pump with CI Head & Base, SS:304 Impeller along with motor, pressure gauge with isolationcock, Isolation valve, flexible connectionNRVon delivery line. Isolation valve, stainer ( with by-pass) at suction.Mechanical seal, suitable vibration elimination pads of approved design, drain pipe with valve(25 dia) for thepump. The pump shall be suitable for 415±10%volts3 phase AC supply. 4 Pumps- 2 Set (1 working & 1 Standby) MAKE- WILO/GRUNDFOS.Capacity :13m3/hrHead : 25 MRPM : 2900
2841	Supplying, installing, testing and commissioning of centrifugal horizontal / vertical irrigation/Flushing water supply pump CI Body,Bronze Impeller along with motor, pressure gauge with isolation cock, NRV, flexible connection , Isolation valve on delivery line. Isolation valve, stainer at (withby-pass) suction. Mechanical seal, suitable vibration elimination pads of approved design, drain pipe with valve(25 dia) for the pump. The pump shall be suitable for 415±10%volts3 phase AC. Supply.(1 W +1S) MAKE- WILO/GRUNDFOSCapacity : 13m3/hrHead : 60 MRPM : 2900
2842	Supplying, installing, testing and commissioning of MSEP Filter shallbe suitable for working pressure of 4 kg / cm2 and shallincludestandardfittings like pressure gauges, sampling cock, rinse drain, vacuum breaker.MAKE- ION EXCHANGE
2843	Multigrade Grade FilterFlow Rate :13m3/hrFilter Height : 1875 mm.Filter Diameter : 1000 mmMake- ION EXCHANGE
2844	Activated Carbon FilterFlow Rate :13m3/hrFilter Height : 1875 mm.Filter Diameter : 1200 mmMake- ION EXCHANGE
2845	Supply, installation, testing & commissioning of High Flow UV system for tertiary water treatment.The UV chamber shall be internally & externally electro polished with double side flange, drain part & probe bar.The unit shall use quartz glass technology for superior UV transmission and specialized high intensity UV lamp rated for 9000 hour operation.The UV dosage shall be greater than 30,000 uW-Sec / sq.cm (1Working) MAKE- ALFA
2846	Unit flow : 13.00 cu-m / hr
2847	Supply, installation, testing & commissioning of single screw double stage, flanged end, CI body alloy steel screw and rotateing parts, pump to filter press 250 LPH 60 mtr. head complete. MAKE- WE
2848	Supply, installation, testing & commissioning of automatic, hydraulic closing mechanism filter press comprising of CI body grade FG 20, polypropylene plate with sludge cake holding capacity of 300 ltrs.MAKE_ WELCOME ENGINEERS
2849	Supply, installation, testing & commissioning of slow speed propler type mixer /egitator having 8-100 RPM, shaft shall be SS-304, 1 HP motor with gear drive, include all the supports to complete the system. MAKE- AQUA ITALY
2850	Supplying all materials, labour, T&P and fixing ofManually operated Outdoor panel with Auto manual provision equipped with 10 Nos. DOL Feeders. etc.complete to be approved by IEIL and as per required specification and direction of Engineer-in-charge. MAKE_ ION EXCHANGE
2851	Supplying all materials, labour, T&P and fixing ofall UPVC/ PVC pipe & Fittings as per required specification and direction of Engineer-in-charge.Make- Supreme
2852	Supplying all materials, labour, T&P and fixing ofCable, Cable tray, Cable tie, earthing strip, glands, lock nuts etc.complete to be approved by IEIL and as per required specification and direction of Engineer-in-charge.
2853	Ultra Filtration Feed Pumps Capacity-20m3/Hour, Head-25-30 Meter
2854	Supplying, installing, testing & commissioning of Ultra Filtration System (UF) of Capacity 300 KLD, electro mechanical system (Excluding Civil construction)
2855	Supplying all materials, labour, T&P and fixing ofSHED, Supports & stair for mechnical items as required and direction of Engineer-in-charge.
2856	Operation & Maintenance of STP for 365 days with 01 nos High Skilled, 03 Nos Skilled & 02 Nos Labour with all required chemical & consumable to maintain the plant as per CPCB Norms.
2857	Aahar Centre
2858	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipesconforming topipe fittings of the following nominal bore with clamps including making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge
2859	20mm dia C - PVC Pipe
2860	25mm dia C - PVC Pipe
2861	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge
2862	25mm dia PVC Pipe
2863	32mm dia PVC Pipe
2864	Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge.
2865	15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
2866	15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)
2867	15mm dia CP Bib cock(Jaquar-Medi series)FLR-CHR-5043N
2868	15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
2869	20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make)
2870	25mm dia brassfull way valve (Shakti make)
2871	32mm dia brassfull way valve (Shakti make)
2872	15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
2873	15mm CP Extension piece
2874	125mm CP grating
2875	15mm size C.P. flange
2876	25mm size brass ball cock with ball
2877	Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge
2878	2000 liters capacityPVC water storage tank
2879	supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge.
2880	Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-charge
2881	Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
2882	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge.
2883	110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
2884	110mm U-PVC‘P’ Trap(Ori Plast/Finolex/Supreme Make)
2885	110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
2886	110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
2887	110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
2888	110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
2889	110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)
2890	110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
2891	110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
2892	Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
2893	10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
2894	Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal
2895	Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral \"p\" or \"s\" trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
2896	European water closet with \"p\" trap plain(Hindware/Parryware/Neycer make)
2897	Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
2898	550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal
2899	Under Counterbasin(560x450)Hindware-No.10095
2900	Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink
2901	Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
2902	25mmx600mm long CP towel rail
2903	Towel ring
2904	Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
2905	600mmx125mm plate glass shelf with CP/NP guard rails.
2906	Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
2907	600mmx450mm size B.E mirror (swivelled type)
2908	Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
2909	CP soap holder
2910	Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.
2911	½” x 5” CP Shower (Plaza Deluxe Make)
2912	Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
2913	Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-charge
2914	Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
2915	Supplying all materials ,labour ,T&P and constructing gully trap chamber ofinside size 250mmx250mmwith 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinthand inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI gratingetc.all complete as per drawing,specification and direction of Engineer-in-charge
2916	Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site.
2917	Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
2918	Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
2919	Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed seriesto be pre-approved by the Engineer-in-charge )
2920	Ceramic tile 30cmx30cm
2921	Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
2922	Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge )
2923	Glazed tile 30cmx45cm
2924	Granite tiles
2925	Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finishstructural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material,The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre\"s standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
2926	Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigmentscomplete in all respect as per specification and direction of the Engineer in charge
2927	Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 120 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 120 liter\"s along with 3 noa of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge
2928	Aqua guard pure Chill 120 PSS UV
2929	Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture\"s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
2930	100mm dia P.V.C. pipe
2931	Supplying all materials labour T&P and constructing 1.20m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
2932	1 no 20 Users Septic tank
2933	Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
2934	Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in chargewith 1st extra lift of 1.50 m over initial laft.
2935	Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge
2936	Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite metal including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
2937	Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
2938	Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
2939	Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,bindingand tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
2940	Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as perspecification and direction of the Engineer-in-charge
2941	RCC floor, roof slab chhaja up to 4.430 m height
2942	Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.
2943	Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
2944	Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as perspecification and direction of the Engineer-in-charge
2945	Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification.
2946	Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge.
2947	B) Attendant Rest Shed
2948	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.
2949	20mm dia C - PVC Pipe
2950	Ground Floor
2951	First Floor
2952	Second Floor
2953	Third floor
2954	Forth Floor
2955	Fifth Floor
2956	Sixth Floor
2957	25mm dia C - PVC Pipe
2958	Ground Floor
2959	First Floor
2960	Second Floor
2961	Third floor
2962	Forth Floor
2963	Fifth Floor
2964	Sixth Floor
2965	25mm dia PVC Pipe
2966	32mm dia PVC Pipe
2967	50mm dia PVC Pipe
2968	Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge.
2969	15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
2970	15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)
2971	15mm dia CP Bib cock(Jaquar-Medi series)FLR-CHR-5043N
2972	15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
2973	20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make)
2974	25mm dia brassfull way valve (Shakti make)
2975	32mm dia brassfull way valve (Shakti make)
2976	50mm dia BFW Valve (Shakti make)
2977	15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
2978	Flush cock with wall flange (Jaquar make) (APR - ESS - 101081)
2979	15mm CP Extension piece
2980	125mm CP grating
2981	15mm size C.P. flange
2982	25mm size brass ball cock with ball
2983	Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge
2984	2000 liters capacityPVC water storage tank roof of 6th floor
2985	supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge.
2986	Ground Floor
2987	First Floor
2988	Second Floor
2989	Third floor
2990	Forth Floor
2991	Fifth Floor
2992	Sixth Floor
2993	Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-charge
2994	Ground Floor
2995	First Floor
2996	Second Floor
2997	Third floor
2998	Forth Floor
2999	Fifth Floor
3000	Sixth Floor
3001	Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
3002	Ground Floor
3003	First Floor
3004	Second Floor
3005	Third floor
3006	Forth Floor
3007	Fifth Floor
3008	Sixth Floor
3009	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge.
3010	110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
3011	110mm U-PVC‘P’ Trap(Ori Plast/Finolex/Supreme Make)
3012	110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
3013	110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
3014	110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
3015	110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
3016	110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)
3017	110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
3018	110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
3019	Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI \"p\" or \"s\" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
3020	580mm size Orissa pan (Hindware/Parryware/Neycer make)
3021	Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
3022	10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
3023	Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge
3024	Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal
3025	Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral \"p\" or \"s\" trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
3026	European water closet with \"p\" trap plain(Hindware/Parryware/Neycer make)
3027	Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
3028	Under Counterbasin(560x450)Hindware-No.10095
3029	Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
3030	25mmx600mm long CP towel rail
3031	Towel ring
3032	Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
3033	Large Size mirror with Frame (28x0.90x0.90)= 19.44
3034	Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
3035	CP soap holder
3036	Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.
3037	½” x 5” CP Shower (Plaza Deluxe Make)
3038	Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
3039	Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
3040	Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-charge
3041	Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
3042	Supplying all materials ,labour ,T&P and constructing gully trap chamber ofinside size 250mmx250mmwith 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinthand inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI gratingetc.all complete as per drawing,specification and direction of Engineer-in-charge
3043	Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
3044	Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
3045	Ground Floor
3046	First Floor
3047	Second Floor
3048	Third floor
3049	Forth Floor
3050	Fifth Floor
3051	Sixth Floor
3052	Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed seriesto be pre-approved by the Engineer-in-charge )
3053	Ceramic tile 60cmx60cm
3054	Ground Floor
3055	First Floor
3056	Second Floor
3057	Third floor
3058	Forth Floor
3059	Fifth Floor
3060	Sixth Floor
3061	Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
3062	Ground Floor
3063	First Floor
3064	Second Floor
3065	Third floor
3066	Forth Floor
3067	Fifth Floor
3068	Sixth Floor
3069	Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge )
3070	Glazed tile 30cmx45cm
3071	Ground Floor
3072	First Floor
3073	Second Floor
3074	Third floor
3075	Forth Floor
3076	Fifth Floor
3077	Sixth Floor
3078	Grnite Tiles 10mm thick
3079	Ground Floor
3080	First Floor
3081	Second Floor
3082	Third floor
3083	Forth Floor
3084	Fifth Floor
3085	Sixth Floor
3086	Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finishstructural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material,The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre\"s standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. \
3087	Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigmentscomplete in all respect as per specification and direction of the Engineer in charge
3088	Supplying all materials, labour, T&P and providing brick work in super structure with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
3089	Ground Floor
3090	First Floor
3091	Second Floor
3092	Third floor
3093	Forth Floor
3094	Fifth Floor
3095	Sixth Floor
3096	Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 120 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 120 liter\"s along with 3 nos of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge
3097	Aqua guard pure Chill 80 PSS UV
3098	Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture\"s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
3099	100mm dia P.V.C. pipe
3100	160mm dia P.V.C. pipe
3101	Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification.
3102	MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover )
3103	Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
3104	2 Nos 100 Users R.C.C.Septic tank
3105	Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of theEngineer-in-Charge.
3106	Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge
3107	In ground floor
3108	Supplying all materials, labour, T&P andproviding cement concrete ( 1:3:6) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
3109	In ground floor
3110	Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
3111	In ground floor
3112	Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
3113	Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
3114	Supplying all materials, labour, T&P and providing M.Sreinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
3115	In ground floor
3116	Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
3117	In ground floor
3118	Supplying all materials,labour,T&P and providing 12mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
3119	Supplying all materials, labour, T&P and providing,fitting and fixing 150mm x 150mm x 150mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification anddirection of the Engineer in charge
3120	Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls ofman hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
3121	1 no 30,000ltr R.C.C. Sump (6.00x2.50x3.00)
3122	Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
3123	Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in chargewith 1st extra lift of 1.50 m over initial laft.
3124	Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
3125	Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge
3126	Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite metal including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
3127	Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
3128	Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,bindingand tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
3129	Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as perspecification and direction of the Engineer-in-charge
3130	RCC floor, roof slab chhaja up to 4.430 m height
3131	Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
3132	Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as perspecification and direction of the Engineer-in-charge
3133	Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and balustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.
3134	Providing fitting and fixing RCPCcoveretc complete as per direction of Engineer-in-charge
3135	Sinking of 200mmx150mm dia Bore Well through DTH method.- 1 no.
3136	Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
3137	Drilling of 200mm dia bore0 to 30 mtr
3138	Drilling of 200mm dia bore31 to 45 mtr
3139	Drilling of 150mm dia bore41 to 125 mtr
3140	Labour for lowering the following size of PVC casing pipes with or without slotted pipes as per necessity from ground level upto 300 mtrs depth and fitted and set up in perfectly vertical position including cutting and threading of blank pipes and slotted pipes and supplyinging and fixing of all jointing materials ,extra sockets and T&P etc. all complete and keeping the top of casing pipe threaded including plugging the tubewell to prevent entry of foreign materials
3141	Lowering of 200mm dia PVC casing pipes 0 mtr to 30 mtrs
3142	Lowering of 200mm dia PVC casing pipes 31 mtr to 45 mtrs
3143	Cost of 200mm dia PVC schedule - 80 pipe
3144	Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
3145	Supplying all materials,labour,T&P andproviding around sealing by cement concrete grouting of annualr space around GI/PVC housing pipe upto 5 mtr below ground level ( as per drawing ) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer-in-charge . Mimimum one meter of casing pipe to nserted in the bore in to the rock the bottom to ensure sanitary sealing ( excluding cost of cement which willbe supplied by the Department )
3146	Sanitary sealing upto 5 mtr below ground level
3147	CC(1:2:4) with 12mm chips for grouting up to 5 mtr Depth in
3148	Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing,commissioning,trial running,conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.
3149	5HP Three Phase 5 stage submersible pump set.
3150	DOL control panel
3151	50mm S. S. Nipple, S. S. bolt & clips
3152	50mm M. S. Clamp, Bend, Socket & 200mm M. S. well cap
3153	2.50mm Sqm Submersible flat cable
3154	Steel rope with cover
3155	20mm dia rigid U-PVC pipe
3156	50mm dia HDPE pipe
3157	Labour charges for lowering, testing, commissioning & transportation to site etc.
3158	Rooftop Rain Water Harvesting System
3159	Supplying all materials, labour, T&P and fitting and fixing U-PVC, SWR soil waste ventilating pipes and fitting of the following outside diameter conforming to 13592/1992 to walls with nails bobbins and wooden plugs or laying in trenches including with supply of approved rubber lubricant by non-heat application method as per manufactures specification testing earth work in excavation in all kinds of soil and refilling of trenches all complete as per specification and direction of the Engineer in charge.
3160	110mm U-PVC SWR Pipe
3161	110mm U-PVC Plain bend
3162	110mm U-PVC Plain tee
3163	110mm dia GI clamp
3164	125mm dia CP grating
3165	Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture\"s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
3166	160mm dia P.V.C. pipe
3167	Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-charge
3168	Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
3169	Supplying all materials labour T&P and constructing 1.80m dia x 2.60 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
3170	C) ESS
3171	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipesconforming topipe fittings of the following nominal bore with clamps including making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge
3172	20mm dia C - PVC Pipe
3173	25mm dia C - PVC Pipe
3174	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.
3175	25mm dia PVC Pipe
3176	32mm dia PVC Pipe
3177	Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge.
3178	15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
3179	15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)
3180	15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
3181	20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make)
3182	20mm dia brassfull way valve (Shakti make)
3183	32mm dia brassfull way valve (Shakti make)
3184	40mm dia brassfull way valve (Shakti make)
3185	15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
3186	15mm CP Extension piece
3187	125mm CP grating
3188	15mm size C.P. flange
3189	Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge
3190	2000 liters capacityPVC water storage tank
3191	supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge.
3192	Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-charge
3193	Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
3194	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge.
3195	110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
3196	110mm U-PVC‘P’ Trap(Ori Plast/Finolex/Supreme Make)
3197	110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
3198	110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
3199	110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
3200	110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
3201	110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)
3202	110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
3203	110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
3204	Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
3205	10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
3206	Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal
3207	Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral \"p\" or \"s\" trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
3208	European water closet with \"p\" trap plain(Hindware/Parryware/Neycer make)
3209	Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
3210	550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with
3211	Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink
3212	Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
3213	25mmx600mm long CP towel rail
3214	Towel ring
3215	Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
3216	600mmx125mm plate glass shelf with CP/NP guard rails.
3217	Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
3218	600mmx450mm size B.E mirror (swivelled type)
3219	Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
3220	CP soap holder
3221	Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.
3222	½” x 5” CP Shower (Plaza Deluxe Make)
3223	Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
3224	Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-charge
3225	Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
3226	Supplying all materials ,labour ,T&P and constructing gully trap chamber ofinside size 250mmx250mmwith 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinthand inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI gratingetc.all complete as per drawing,specification and direction of Engineer-in-charge
3227	Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
3228	Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed seriesto be pre-approved by the Engineer-in-charge )
3229	Ceramic tile 30cmx30cm
3230	Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
3231	Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge )
3232	Glazed tile 30cmx45cm
3233	Granite Tiles 10 mm thick
3234	Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finishstructural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material,The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre\"s standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
3235	Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigmentscomplete in all respect as per specification and direction of the Engineer in charge
3236	Supplying all materials, labour, T&P and providing brick work in super structure with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
3237	Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture\"s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
3238	100mm dia P.V.C. pipe
3239	Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
3240	1 no 20 Users Septic tank
3241	Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
3242	Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in chargewith 1st extra lift of 1.50 m over initial laft.
3243	Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge
3244	Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite metal including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
3245	Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
3246	Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
3247	Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,bindingand tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
3248	Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as perspecification and direction of the Engineer-in-charge
3249	RCC floor, roof slab chhaja up to 4.430 m height
3250	Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.
3251	Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
3252	Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as perspecification and direction of the Engineer-in-charge
3253	Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification.
3254	Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge.
3255	D) Mortuary
3256	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipesconforming topipe fittings of the following nominal bore with clamps including making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge
3257	20mm dia C - PVC Pipe
3258	Ground Floor
3259	First Floor
3260	25mm dia C - PVC Pipe
3261	Ground Floor
3262	First Floor
3263	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.
3264	25mm dia PVC Pipe
3265	32mm dia PVC Pipe
3266	Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge.
3267	15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
3268	15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)
3269	15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
3270	20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make)
3271	25mm dia brassfull way valve (Shakti make)
3272	32mm dia brassfull way valve (Shakti make)
3273	15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
3274	15mm CP Extension piece
3275	125mm CP grating
3276	15mm size C.P. flange
3277	25mm size brass ball cock with ball
3278	Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge
3279	2000 liters capacityPVC water storage tank roof of 1st floor
3280	supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge.
3281	Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-charge
3282	Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
3283	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge.
3284	110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
3285	110mm U-PVC‘P’ Trap(Ori Plast/Finolex/Supreme Make)
3286	110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
3287	110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
3288	110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
3289	110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
3290	110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)
3291	110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
3292	110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
3293	Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
3294	10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
3295	Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal
3296	Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral \"p\" or \"s\" trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
3297	European water closet with \"p\" trap plain(Hindware/Parryware/Neycer make)
3298	Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
3299	550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal
3300	Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink
3301	Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
3302	25mmx600mm long CP towel rail
3303	Towel ring
3304	Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
3305	600mmx125mm plate glass shelf with CP/NP guard rails.
3306	Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
3307	600mmx450mm size B.E mirror (swivelled type)
3308	Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
3309	CP soap holder
3310	Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.
3311	½” x 5” CP Shower (Plaza Deluxe Make)
3312	Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
3313	Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-charge
3314	Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
3315	Supplying all materials ,labour ,T&P and constructing gully trap chamber ofinside size 250mmx250mmwith 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinthand inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI gratingetc.all complete as per drawing,specification and direction of Engineer-in-charge
3316	Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site.
3317	Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
3318	Ground Floor
3319	First Floor
3320	Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed seriesto be pre-approved by the Engineer-in-charge )
3321	Ceramic tile 30cmx30cm
3322	Ground Floor
3323	First Floor
3324	Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
3325	Ground Floor
3326	First Floor
3327	Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge )
3328	Glazed tile 30cmx45cm
3329	Ground Floor
3330	First Floor
3331	Granite Tiles 10mm thick
3332	Supplying all materials, labour, T&P and providing brick work in super structure with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
3333	Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finishstructural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material,The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre\"s standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
3334	Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigmentscomplete in all respect as per specification and direction of the Engineer in charge
3335	Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture\"s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
3336	100mm dia P.V.C. pipe
3337	Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification.
3338	MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover )
3339	Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
3340	Construction of 30 users RCCseptic tank
3341	Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of theEngineer-in-Charge.
3342	Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
3343	Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
3344	Supplying all materials, labour, T&P and providing shoring and shuttering for foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per specification and direction of the Engineer in charge
3345	Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
3346	R.C.C floor and roof slabs up to 4.30m height
3347	RCC beam,Column, girders and bressmer etc
3348	Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
3349	Supplying all materials, labour,T&P and providing cement concrete(1:1 ½:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
3350	Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
3351	Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
3352	Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls ofman hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
3353	Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
3354	M.G.P.S SYSTEM
3355	Liquid Oxygen supply system One vessel of 1X20 KL Liquid oxygen VIE vessel system will be the primary (main) supply sourceIn case of failure in liquid oxygen supply, it should automatically switch over to an secondary source oxygen manifold having 2 X 20 cylinders. Design should be state-of-the-art. The unit should consist of a double walled vertical vessel (inner pressure vessel made of stainless steel and outer vessel of carbon steel).It should be fitted with standard accessories and should be “passed” the standard inspection requirement at factory for VIE.
3356	20+20 size manifold extendable type complete with middle frame with chain for individual cylinder (bulk cylinder D-type) along with Non-Return Valves for every cylinder and copper tail pipes .
3357	Fully Automatic Digital Gas Control Panel for Oxygen with inlet for Liquid Oxygen Tank as per NFPA 99, -
3358	6 + 6 Cylinders Emergency Oxygen Manifold with two stage High flow rate regulator with NRV for every cylinder and copper tail pipes as per specifications.
3359	Terminal Units (Gas Outlets) with probes/Adaptors as per NFPA, CSAUL Listedas per NFPA 99, -
3360	Oxygen Flowmeter with Humidifier Bottle.
3361	H.P Tubing Flexible having antistatic Core as per ISO with Proper colour coded .
3362	Nitrous Oxide System
3363	4 + 4 size manifold extendable type complete with middle frame with chain for individual cylinder (bulk cylinder D-type) along with Non-Return Valves for every cylinder and copper tail pipes .
3364	TwoCylinder Emergency N2O Manifold with two stage High flow rate regulator with NRV for every cylinder and copper tail pipes .
3365	Fully Automatic Control Panel for N2O .
3366	Terminal Units (Gas Outlets) with probes/Adaptors as per NFPA, CSAUL Listedas per NFPA 99,-
3367	H.P Tubing Flexible having antistatic Core as per ISO with Proper colour coded .
3368	Compressed Air System
3369	The unit should have Quadruplex stationary air cooled silenced (Reciprocating) Oil-Free Air Compressor with critical maintenance free technology each having 57.18 scfm capacity.
3370	3-Stage Breathing Air FiltersAir Receiver Tank
3371	Terminal Units (Gas Outlets) with probes/Adaptors as per NFPA, CSAUL Listedas per NFPA 99, -
3372	For 4 bar
3373	For 7 bar
3374	H.P Tubing Flexible having antistatic Core as per ISO with Proper colour coded as per Technical Specification
3375	Vacuum System
3376	Penta plex7V Vacuum Pumps of Ingersoll with Motor each with receiver vessel, with bacteria filter capacity.The system to provide duplex/cascade vaccum system for automatically start and stop at 480mm and 650 mmHG
3377	Vaccum Tank reservoir ( 3000 Ltrs Capacity)Bacteria Filters
3378	Terminal Units (Gas Outlets) with probes/Adaptors as per NFPA, CSAUL Listedas per NFPA 99,
3379	Ward Vacuum Unit with Regulator, Collection Jar of 600 ml with bracket .(For Wards)
3380	Ward Vacuum Unit should with Digital and color coded display type regulator having large, easy to read gauge providing unmatched gauge accuracy + 1% of full scale color coded range with analogue mechanism.The unit should have 3-Mode High feature and equipped with push to set technology with collection Jar of 1200 ml with bracket (for Critical Areas) as per Technical Specification .
3381	Theatre Suction Unit, Trolley mounted with 2 nos. 2000ml Collection jars, jar selector unitand Suction Controller .
3382	H.P Tubing Flexible having antistatic Core as per ISO with Proper colour coded .
3383	Combined Electrical Control Panel for Compressed Air System and Vaccum System .
3384	Copper Pipes used will be solid drawn, seamless, deoxidized, non arsenical, half hard, tempered and degreased, manufactured as per EN 1057 part I, Table-X of 1971 and chemical composition as per BS-6017 of 1981, Table 2, Cu-DHP.,Kite Marked.
3385	76 mm OD X 1.5 mm thk
3386	54mm OD X 1.2mm thk
3387	42mm OD X 1.2mm thk
3388	28mm OD X 1 mm thk
3389	22mm OD X 1 mm thk
3390	15mm OD X 1 mm thk
3391	12mm OD X 1 mm thk
3392	Valves Boxes with Pressure Gauges
3393	6 Gas Services(O2,Vac,N2O,Air4,Air7,AGSS)
3394	4 Gas Services (O2, Vac, N2O, Air 4 )
3395	3 Gas Services ( O2, Vac, Air 4)
3396	2 Gas Services ( O2, Vac, Air 4)
3397	Area Alarm (Touch Screen)
3398	6 Gas services(O2,Vac,N2O,Air 4,Air 7,AGSS)
3399	5 Gas Services (O2, Vac, N2O, Air 4, Air 7, )
3400	4 Gas Services (O2, Vac, N2O, Air 4, )
3401	3 Gas Services ( O2, Vac, Air 4)
3402	2 Gas Services ( O2, Vac, Air 4)
3403	Isolation Valves
3404	76mm
3405	54mm
3406	42mm
3407	28mm
3408	22mm
3409	15mm
3410	MASTER ALARM
3411	Bed Head Panels(for ICU)
3412	Bed Head Panels (For Wards)
3413	Anesthesia Gas Scavanging System Oil Less Contactless Rotary Claw, Tank Mounted Duplex System should be fully compliant for use in Medical AGSS System. The unit should consist of four electric motor driven pumps vacuum receiver, electrical control system and interconnection piping and wiring.Design Capacity SCFM@ 19\"Hg/Capacity of each pump is 39 / 39 with 5 HP Motor & Tank Size 120 gallons .
3414	Medical Gas Terminal/Outlet points for AGSS. (CEMARKED)UL LISTED

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Const. Of 650 Bedded Teaching Hospital At New Govt. Medical College, Bhawanipatna, Dist. Kalahandi ( Incl. Const. Of Attendance Rest Shed, Aahar Centre, Mortuary, Ess, Internal Road, Compound Wall, Box Cell Bridge, Drain, Landscaping , Bhawanipatna, Kalahandi-Odisha

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Const. Of 650 Bedded Teaching Hospital At New Govt. Medical College, Bhawanipatna, Dist. Kalahandi ( Incl. Const. Of Attendance Rest Shed, Aahar Centre, Mortuary, Ess, Internal Road, Compound Wall, Box Cell Bridge, Drain, Landscaping , Bhawanipatna, Kalahandi-Odisha

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us