|
| 1 | Dismantling of 8” thick H.B Masonry in Cement Mortar |
| 2 | Dismantling asbestos cement celotax or other hard board ceiling or partition walls including supporting timber |
| 3 | Corrugated GI sheet roofing 0.80 mm thick fixed with galvanized iron Jor L hooks 10 mm dia .G.I Limpot and bitumen washer complete excluding the cost of purling rafter and trusses. |
| 4 | Dismantling conglomerate floor 25 mm to 50 mm thick without conc. Base |
| 5 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. (A) Size 600x600 mm |
| 6 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure |
| 7 | Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. |
| 8 | Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete |
| 9 | 8 thick hollow block masonry 1: 5 in Super structure |
| 10 | Scraping white wash and colour wash. |
| 11 | Cement plaster 12.5 mm thick in 1 : 5 |
| 12 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish |
| 13 | Distempering with acrylic washable oil bound distemper of approved manufacture two coats over one priming coat to give an even shade. |
| 14 | Removing door and window (steel or wood) with chowkhat by making necessary recesses in walls when the wall not to be dismantled(a) Door of area 3 sqm and below |
| 15 | (b) Window of area 3 sqm and below |
| 16 | Providing and fixing M.S. angle iron 40x40x6mm chowkhat including iron hold fasts butt hinges fixed in position, finished with red lead non setting primer complete in all respect(a) Single rebate door |
| 17 | (b) double rebate door |
| 18 | Deodar wood door shutter and window shutter including hinges, screws, and cords etc. complete fixed in position. (a) panelled, glazed or glazed and panelled (i) 40 mm thick single leaf |
| 19 | Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. (b) Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area |
| 20 | Applying priming coat with metal primer on new steel or wood work including preparation of surface. |
| 21 | Painting two coat with synthetic enamel paints in all shades on wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. |
| 22 | Providing and fixing M.S pressed steel shutter with frame for cup board made up of 20 gauge M.S sheet pressed and fold to required size as per approved drawing with 3 No. ISI Marked M.S heavy weight bult hinges 9100 mm ) on each panel ,2 No ISI marked oxidized M.S sliding door bolt 250 mm long with nut and screw as shown in drawing and fixing the shutter frame to required space with 150 x10 mm nuts & bolts/Rawl plug and applyingtwo coats of synthetic animal paint of approved quality over one coat of approved steel primer etc. complete as per direction of Engineer- In-Charge. |
| 23 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading |
| 24 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 25 | Finishing walls with acrylic smooth exterior paint of required shade with two coats applied @ 1.67 litre/10sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm |
| 26 | Providing and Fixing helical door spring 150 mm (superior quality ) including necessaryscrew complete (b) Iron helical springs |
| 27 | Providing and fixing wire gauge door shutter with kail wood without springs housed chowkets (Single leaf) 35mm thick |
| 28 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. (a) (ii) C.P. brass Bib cock foam flow without flang |
| 29 | Butt Hinges (all Item) ISI market) Anodize of Aluminium mat finish tower bolt (barrel type)(e)For doors 250x10mm |
| 30 | (e/iv) For window 100x10 mm |
| 31 | Butt Hinges (all Item) ISI market)Anodize of Aluminium mat finish Handles (M-18) (b)(i) For Doors 125 mm with plate 175 mm x 32 mm |
| 32 | (ii) For windows 100 mm with plate 150 mm x32 mm |
| 33 | Providing and fixing slidingAluminium door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS 1868 ) transparent of died to required color with nuts and screws etc Complete(a) For doors 300x16 mm |
| 34 | Providing and laying, jointing fixing and testing G.I pipe line B-class including cost of special such as tees , bends ,sockets ,elbows etc. testing cutting threading inside build and complete. 15 mm dia I/D C.S |
| 35 | Providing and fixing in position chinaware anglo indian water closer with P Trap or S Trap (to the approval of Engineer-In-charge ) suit consisting of 10 Ltr PVC flushing cistern ISI market supported on angle Iron Short bend 32 mm dia c( including cost of solid white cover) omplete in all respect and to the entire satisfaction of Engineer In-charge. |
| 36 | Providing and fixing jet spray with 2’-6” long PVC pipe with C.P. Brassnut |
| 37 | Providing and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge(a) Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity (without cistern fitting) size 62x37x67 cm with P trap or S trap and seat cover complete in all respect. |
| 38 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect. |
| 39 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.(a) Triple Layer Tanks |
| 40 | Providing & fixing in position on terrace (at all floor levels) HDPE tank cover for water storage tanks of approved make (to the approval of Engineer in charge(a) Upto 500 ltr capacity tank |
| 41 | SURFACE PVC CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) installed on surface etc., complete with PVC boxes (Plastic on surface boxes) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. (4Module Box), 16Amp. Universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), MS saddle clamp, PVC Circular junction Boxes (Four way 1½\" deep for walls), bonding to earth with PVC insulated copper conductor singlecore FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material and painting as required:-i)Wiring fan point (Without fan box) |
| 42 | Wiring light point |
| 43 | Wiring call-bell point |
| 44 | Wiring 6Amp. wall socket point |
| 45 | Wiring 16/20Amp. power plug control point |
| 46 | Supply and erection of Miniature Circuit Breaker MCB\"s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-cycles AC Supply. 6 Amp.=8 No.(Each Set) |
| 47 | White Washing Two Coat |
