Military Engineer Services-MES has published Provision Of Single Jco Living Accn Under Ge ( East ) Mathura As Per Tender Documents. Submission Date for this Tender is 17-12-2021. Building Work Tenders in GE (EAST) MATHURA Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 10-Dec-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-12-2021 |
| Sl. No. | Item Description |
| 1 | Surface excavation n exc 30cm deep and averaging 15 cm deep and getting out soft / loose soil complete all as specified and directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. and getting out in soft/loose soil complete all as specified and directed. |
| 3 | M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 4 | M&L for Anti Termite Treatment by Treating the the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. |
| 5 | M&L for Anti Termite Treatment by Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed. |
| 6 | M&L for Anti Termite Treatment by Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed. |
| 7 | M&L for Anti Termite Treatment by Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. |
| 8 | M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 9 | M&L for RCCdesign mix M-25 grade, (using20 mm graded stone aggregate) as in foundation, footings, plinth Beam and similar works complete all as specified and directed. |
| 10 | M&L for RCCdesign mix M-25 grade,(using20 mm graded stone aggregate) as in Columns, pillars, piers, posts and struts &similarworks complete all as specified and directed. |
| 11 | M&L for RCCdesign mix M-25 grade,(using20 mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels& similar works complete all as specified and directed. |
| 12 | M&L for RCC design mix M-25 grade,(using 20 mm graded stone aggregate) as in chajjas complete all as specified and directed. |
| 13 | M&L for RCCdesign mix M-25 grade,(using20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like& similar RCC works complete all as specified and directed. |
| 14 | M&L for RCC design mix M-25 grade using 20 mm graded stone aggregate as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed. |
| 15 | Use and waste of formwork to sides of pillars,posts and columns for rough finished surface square/ rectangular of concrete complete all as specified and directed. |
| 16 | Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams and similar works for flat rough finished surface complete all as specified and directed. |
| 17 | Use and waste of formwork to sides and soffits of floor or roof beams, lintiles cantilever etc for flat rough finished surface complete all as specified directed. |
| 18 | Use and waste of formwork to chajjas for rough finished surfaces complete all as specified and directed. |
| 19 | Use & waste of Form work to soffits of suspended slabs such as roof slabs floor slab landing and similar work for flat rough finished surface complete all as specified and directed. |
| 20 | Use & waste of Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for rough finished flat surface complete all as specified and directed. |
| 21 | Use & waste of Form work to edges of suspended slabs n.exc 20 cm thickness for fair finished surface complete all as specified and directed. |
| 22 | Returning, filling inincluding spreading, leveling, watering and well ramming in layers not exc 25 cm thick using excavated soil all complete all as directed. |
| 23 | Removing excavated soil to a distance exc 250 m but n exc 500 m and depositing where directed at a level of n.exc 1.5 m above the starting point all complete all as directed. |
| 24 | M&L for MS TMT bars (FE-500 Grade) 10 mm dia and over cut to length and bent to shape required including cranking bending spirally for hooping for columns hooking end and binding with mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 25 | M&L for MS TMT bars (FE-500 Grade)5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length and bent to shape required including cranking bending spirally for hooping for columns hooking end and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 26 | M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surface of slab, beam & ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 27 | M&L for rendering 15 mm thick on brick wall or concrete surface in cement mortar 1:4 finished even & smooth without using extra cementincluding mixing water proofing compound @ 200ML/ bag complete all as specified and directed. Note:-Water Proofing compound shall be measured and paid separately. |
| 28 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 29 | M&L for rendering 10 mm thick on brick wall or concrete surface in cement mortar 1:6 finished even & fair complete all as specified and directed. |
| 30 | M&L for preparation of new wall surfaces and applying one coat of alkali resistant priming paint on walls complete all as specified and directed. |
| 31 | M&L for preparation of new plastered surface of wall and applying two coats of white wash complete all as specified and directed. |
| 32 | M&L for applying two coats of exterior emulsion exterior emulsion paint,Apex of Asian Paints or equivalent item of other specified makes as given in appendix "B" to Particular Specification complete all as specified and directed. |
| 33 | M&L for preparation of plastered surface of wallsand applying two coats of oil bound distemper of any colour over a coat of primer over and including a coat of cement base wall care putty applied as per manufacturer"s instruction complete all as specified and directed. |
| 34 | M&L forpreparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed. |
| 35 | Hardcore of broken stone or boulder gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick watered and rammed to true surface complete all as specified and directed. |
| 36 | M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base to floors and paving etc all complete all as specified and directed. |
| 37 | M&L for 25 mm thick cement concrete type B1 1:2:4 using 20 mm graded aggregate as in levelling course complete all as specified and directed. |
| 38 | M&L for Green marble work 20 mm thick (table rubbed and polished) & circular cutting at one end in steps,jambs, pillars,window, cills, cooking platforms and like in cement mortar(1:4) including pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 39 | M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 40 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of eachtile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 41 | M&L for Glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick plaster incement mortar (1:3) complete all as specified and directed. |
| 42 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with mechanical scrubber over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 43 | M & L for 75 mm thick plain cement concrete 1:3:6, type C1 (using 20 mm graded stone aggregate) as in plinth protection surfaces finished even and smooth without using extra cement including filling the joints by bitumen and sand mixed in the ratio 1:4 by weight complete all as specified and directed. |
| 44 | M&L for 40 mm thick avg thickness PCC 1:2:4 type B0(using 12.5 mm graded aggregate as in padding finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 45 | M&L for Preparing new RCC roof surfaces and providing 10 mm thick modified plaster in CM 1:4 cement mixed with polymer in ratio of 1:10 (1 part of polymer and 10 parts of cement) applying priming coat of epoxy primer with resin and hardener with water dilution as per manufacturer instructions, applying two coat of solvent based polyurethane liquid membrane not less than 500 micron thick UV stable having SRI value greater than or equal to 105 with consumption of 0.61 Kg/Sqm (each coat) 2nd coat should be applied once 1st coat is dried completely complete all as specified and directed. Make : Asian paints /Thermax or equivalent make as approved. |
| 46 | S&F Hydraulically pressed PCC tile plain of size 200x200x20 mm machine made laid over and including cement mortar screed 15mm thick in CM 1:4 mixed with water proofing compound and jointed pointed in CM 1:3 mixed with 5% crude oil by weight of cement coplete (WPC shall be measured and paid separately). |
| 47 | S&F 125x60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed. |
| 48 | M&L for Pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed. |
| 49 | M&L cement concrete type C-1 (1:3:6) 20mm graded stone aggregate as in blocks for fixing hold fasts and fillling of chowkhats or any other purpose complete all as specified and directed. |
| 50 | M&L forapplying two coats of synthetic enamel paint on steel surfaces complete all as specified and directed. |
| 51 | S&F Factory made IInd class Hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 52 | S&F 35 mm thick flushshutters, solid core construction withblock board core and plywood face panel commercial type on both side complete all as specified and directed. |
| 53 | M&L of preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 54 | S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 55 | Supply & fix150 mm long aluminium handles fabricated type anodised complete all as specified and directed. |
| 56 | Supply & Fix 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 57 | Supply and fix Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 58 | Supply and fixing factory made uPVC white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm(0.2 mm ).Windoow profile with hollow section with multi chamber.Frame (88 mm x 52 mm),sliding sash (42 mm x 67 mm ).Sliding mesh Sash (42 mm x 57 mm) Slide interlock (One vertical length in each shutters )(45.5 mmx 28 mm ),Glazing bead (24.5 mm x 16 mm) will be mitered cut and fusion welded at all corners,including railing of holes for fixing hardware and drainage of water etc. making arrangement for fising of hardware.EPDM gasket1.2+ 0.2mm mm thick galvanized steel frame (30mmx18 mm) 2 Nos ,sliding sash(30 mm x 18 mm),sliding mesh sash (26 mmx 10 mm) profile to be inserted in required profile ,frame will be fixed to wall with 8 mmx100 mm long fasteners. Hardware Touch lock of zinc alloyed (white powder coated ),steel roller system, stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories. (Note : The unit rate quoted by contractor excludes cost of glass and stainless steel wire cloth but includes all other connected accessories.Net opening will be measured for payment purpose.) Area n exc 1.00 Sqm Each all as specified in TD No CEJZ/TD/2021/S-01 Sheet. 1/1 Dt 28 Jan 2020 complete all as specified and directed. |
| 59 | Supply and fixing factory made uPVC white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm(0.2 mm ).Windoow profile with hollow section with multi chamber.Frame (88 mm x 52 mm),sliding sash (42 mm x 67 mm ).Sliding mesh Sash (42 mm x 57 mm) Slide interlock (One vertical length in each shutters )(45.5 mmx 28 mm ),Glazing bead (24.5 mm x 16 mm) will be mitered cut and fusion welded at all corners,including railing of holes for fixing hardware and drainage of water etc. making arrangement for fising of hardware.EPDM gasket1.2+ 0.2mm mm thick galvanized steel frame (30mmx18 mm) 2 Nos ,sliding sash(30 mm x 18 mm),sliding mesh sash (26 mmx 10 mm) profile to be inserted in required profile ,frame will be fixed to wall with 8 mmx100 mm long fasteners. Hardware Touch lock of zinc alloyed (white powder coated ),steel roller system, stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories. (Note : The unit rate quoted by contractor excludes cost of glass and stainless steel wire cloth but includes all other connected accessories.Net opening will be measured for payment purpose.) Area n exc 2.00 Sqm Each all as specified in TD No CEJZ/TD/2021/S-01 Sheet. 1/1 Dt 28 Jan 2020 complete all as specified and directed. |
| 60 | Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 61 | M&L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 62 | Supply only 5 mm Sheet glass,ordinary quality and glazing with oil putty or fixing with beads and rubber gasket in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 63 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet PVC sheet reinforced with M.S. square tube,supplying & fixing in opening as per specification & drawing complete all as specified and directed. |
| 64 | S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 65 | S&F 25 mm dia, chromium platedcurtain rod with fixing brackets, stops, rollers etc.complete all as specified. |
| 66 | Supply & fix butt hinges 100mm long extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 67 | S&F 15 mm bore GI tubing medium grade including all fittings & fixture fixed to walls and ceilings or laid in floors complete all as specified and directed. Note : Cutting chases for consealed tubing will be measured and paid separately in respective item of this Schedule. |
| 68 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth of brick walls complete all as specified and directed. |
| 69 | S&F 20 mm bore GI tubing medium grade including all fittings & fixture fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 70 | S&F 15 mm Bib taps, cast copper alloy with crutch orbutterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 71 | S&F15mm dia bore Stop valves/Angle cock cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 72 | S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC Flush pipe complete including jointing to socket of flushing rim all as specified and as directed. |
| 73 | S&F vitreous china wash hand basin,white, flat back size 580x450 mm including fixing to wall with brackets and including 15 mm dia pillar tap cast copper alloy, with capstan head , chromium pated, screwed down high presure, with long screwed shaks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 74 | S&F 600x 450 mm bevelled edges mirror of selected quality glass, mounted on 6 mm thick AC buildingboard or commercial plywood and fixed to wooden plugs with chromium plated brass screw andcup washers complete all as specified and directed. |
| 75 | S&F Swivel shower of stainless steel 100mm dia for fixing with 15mm pipe complete all as specified and directed. |
| 76 | S&F Shower arm 15 mm size, 195mm long with bend of 45 degree with flange of stainless steel complete all as specified and directed. |
| 77 | S&F waste pipe of min 75 cm long suitable for 32mm dia waste fitting complete all as specified and directed. |
| 78 | S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 79 | S&F stainless steel towel rod 25mm dia and 600mm long fixed with and including chromium plated brass screws and wooden/plstic cleats complete all as specified and directed. |
| 80 | S&F 75 mm dia of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 81 | S&F 75 mm PVC (SWR) pipes single socketed,inanylength with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 82 | S&F 110 mm PVC (SWR) pipes single socketed,inanylength with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 83 | S&F 110 mm PVC (SWR) pipes single socketed inany length withrubber ring joints fixed to walls complete all as specified and directed. |
| 84 | S&F 75 mm bend with access door fixed to pipe complete all as specified and directed. |
| 85 | M&L for 150x150mmSalt-glazed stoneware gully traps, square or round mouthed, tvpe "P" complete all as specified and directed. |
| 86 | S&F 110 mm PVC (SWR) junction single, (Single T) equal or unequal with accesss door complete all as specified and directed. |
| 87 | S&F 110 mm bore PVC (SWR) Vent Cowl fixed to pipe complete all as specified and directed. |
| 88 | Supply and fix 1000 litre capacity white colour triple layer ISI Marked rotational moulded polyethylene water storage tank (cylindrical vertical with closed top)hoisted and fixed in position including making inlet/oulet connection and fitting tank connection complete all as specified and directed. |
| 89 | Supply and Fix 20 mm bore dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 90 | S&F 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixedcomplete all as specified and directed. |
| 91 | M&L for 100 mm thick cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed. |
| 92 | M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade made with grey cement and pigmentwith and including laid over 25mm thick sand chshioning and joint of pavor block to be filled with same sand complete all as specified and directed. |
| 93 | M&L for PCC type C1 1:3:6 using 20mm graded stone aggregate as in plinth coarse, string courses etc complete all as specified and directed. |
| 94 | Removing excavated material to a distance n.exc 50M and depositing where directed at a level n.exc 1.50M above the starting point complete all as specified and directed. |
| 95 | M & L for PCC 1:3:6 type C2 using 40mm stone aggregate an in fdn of manholes complete all as specified and directed. |
| 96 | M & L for PCC 1:3:6 type C2 as in bed to 150mm bore drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 97 | M&L for 150mm internal dia salt glazed stone ware drain pipes laid in trenches and jointed complete all as specified and directed. |
| 98 | M & L for PCC 1:2:4 type B1 as in coping surface channels, benchings etc of manholes finished fair and even complete all as specified and directed. |
| 99 | M&L brick work with sub class ‘B’ old size fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed. |
| 100 | M&L for Precast RCC 1:1/2:3 type A1 (using 20 mm graded aggregate) as in cover slabs for manholes complete all as specified and directed. |
| 101 | M&L for TMT bars 6 to 8mm dia, cut to length bend to shape reqd incl cranking and lbinding with mild steel wire (annealed) complete all as specified and directed. |
| 102 | Extra for forming fair finished channel or drain 30cm ginth (inner ginth) in cement concrete using extra cement incl forms, moulds stopped complete all as specified and directed. |
| 103 | M &L for 15 mm thick rendering in CM1:4 on fair faces of brick work/concrete surfaces finished fair and even without using extra cement complete all as specified and directed. |
| 104 | Cutting existing steel tubing of size 25/32mm bore for alterations or additions (each cut measured) done in position without taking down complete all as specified and directed. |
| 105 | Screwing existing steel tubing 25mm bore for alterations or additions (or lenghtening screw on pipe to form connector) done in position without taking down complete all as specified and directed. |
| 106 | M&L for steel water tubes, medium grade, galvanised, with all fittings , laid in trenches fixed to wall of size 25mm dia and connecting with existing lines with suitable GI Tee including testing complete all as specified and directed. |
| 107 | M&L for Gun Metal gate valve with iron wheel head, screwed both ends for iron pipe of size 25mm dia complete all as specified and directed. |
| 108 | M & L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, copper conductor, inuniversal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd)and its all accessories complete concealed in wall / roofincl cutting & chases( making good all to the disturbed surfaces as per existing)and modular flush metal boxessuitable for modular fittings including modular cover plate with framefor mounting modular switches, sockets,etcincluding earth wire ofPVC insulated (FRLS) copper conductor multistrandedof 1.5Sqmmsize in green colour complete all asspecified in current SSR Part-I & II & directed by the Engineer-in-Charge , as described below:- |
| 109 | One light point controlled by one way switch 6 amp complete. |
| 110 | OneCeiling Fan /Exhaust fanpoint controlled by one way switch 6 amp complete. |
| 111 | One 3 pin 5 Amps socket point controlled by one switch on independent board. |
| 112 | One 3 pin 5 Amps socket point controlled by one switch on same board. |
| 113 | One bellpoint controlled by one push button on independent board |
| 114 | One light point controlled bytwo2-way switchs 5 amp complete. |
| 115 | All as per item No. 108 butfor 3 pin / 5 pin 16 Amps sockets outlet with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent complete all as specified and as directed . |
| 116 | Supply and Fixing ceiling rose surface bakelite 65mm x 50mm three terminals complete all as specified and directed. |
| 117 | Supply and FixingModular switch 6 Amps single pole one-way, 1 Module complete all as specified and directed. |
| 118 | Supply and FixingModular switch16 Amp single pole one way,1 Module complete all as specified and directed. |
| 119 | Supply and Fixing Modularsocket2-in-1, 5 pins 6 Amps , combined 2 Modulecomplete all as specified and directed. |
| 120 | Supply and FixingModular socket 2-in-1,3 and5 pins 6 /16 Amps, combined 2 Module complete all as specified and directed. |
| 121 | Supply and fix modular power socket 16 Amp unit protected with 16 Amp SP MCBincluding with sheet enclosuer complete all connection complete all as specified and directed. Make : Havellsas per Cat Part No DHDMCSN0251016or equivalent item of other specified makes as given in appendix "B" to Particular Specification. |
| 122 | Supply & Fixing Modular fan Regulator electronic step type 120watt, 2 Module complete all as specified and directed. |
| 123 | Supply and fixing Bell Multi Musictype,230 Volts complete with connection complete all as specified and directed. |
| 124 | Supply and FixingModular switch 6 Amps single pole two-way, 1 Module complete all as specified and directed. |
| 125 | Supply and fixing Lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 126 | Supply & fixing indoor decorative ultra slim surface /Wall mounted T5 LEDbatten tube light complete fitting 1x 20 watt LED Tube fittingwith polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts, complete all as specified and directed by Enginee-in-Charge.Make:Havells (as per Cat Part No: LUMILINEBS20WLED 865 SPC WH)or equivalent item of other specified makes as given in appendix "B" to Particular Specification. |
| 127 | Supply & fixing decorative Wall light fittingmade up of Polycarbonate with outer cover shape having Glove / Mars suitable for B-22 base holder with 10 Watt LED lampcomplete with all accessories and including connection complete all as specified and as directedMake : Havells (as per Cat Part No MARS Shape - :LHFOFWE1TZ1W012 9405) or equivalent item of other specified makes as given in appendix "B" to Particular Specification. |
| 128 | Supply & fixing indoor decorative ultra slim surface /Wall mounted T5 LEDbatten tube light complete fitting 1x 9 watt LED Tube fitting suitable for mirror light with polycarbonate channel housing, 140V-270 volts and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Enginee-in-Charge. Make:Havells (as per Cat Part No: LUMILINEBS9WLED865 SPC W H)or equivalent item of other specified makes as given in appendix "B" to Particular Specification. |
| 129 | Supply and fixing surface mount type bulk head LED fitting 10 Watt complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size ofcomplete all as specified and as directed. Make: Havells ordering cat part No HEXAFT10WLED 857SSY MBOPCor equivalent item of other specified makes as given in appendix "B" to Particular Specification. |
| 130 | Supply and fix LED15 W lamp suitable for normal holder( Base Cap B22) complete all as specified. Make : Havellsor equivalent item of other specified makes as given in appendix "B" to Particular Specification. |
| 131 | Supply and install of 35W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainablewith heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt,voltage range of 140-280Vincluding all connections complete all as specified. Make of fitting : Havells or equivalent item of other specified makes as given in appendix "B" to Particular Specification. |
| 132 | S&F MCB distribution board, SPN 12 Way, Double door, sheet steel, phosphatised, powder painted with Copper bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified and directed. |
| 133 | Supply & fixing MCB SP 6 - 32 Amps, " B" series ,bracking cap10KA complete all as specified and directed. Make : Havells- or equivalent item of other specified makes as given in appendix "B" to Particular Specification. |
| 134 | Supply & fix MCB SPN 40-63 Amps," C" series , bracking cap10KA, 240V complete all as specified and directed. Make : Havells or equivalent item of other specified makes as given in appendix "B" to Particular Specification. |
| 135 | M&L for building securitylight bracket made out of 40mm dia light grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubularpole including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including two coats of aluminium paint over a coating of red oxide primer complete all as specified and directed . |
| 136 | M&L for earthing complete with galvanized steel earth plate electrodesize 600 mm x 600 mm x 6.3 mm thick buried directly in groundvertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanized iron wire 4mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized including GI protection pipe light grade 15mm dia connected to main earth lead on pole or control board and GI pipe light grade 20 mm dia for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC (1:3:6) type C-2 including necessary excavation and earth work all as shown in electrical plate No 3 connected to earthing test point and testing on completion complete all as specified and directed. Note : GI wire and protection pipe upto7.5 Mtr length from earth electrode shall be included in quoted rate of item. |
| 137 | Supply and fix exhaust fan 250mm sweepnon metallic type alongwith louvers / front grill complete suitable to work on AC, single phase, 230 Volts complete with connection and all as directed . Make : Havellsor equivalent item of other specified makes as given in appendix "B" to Particular Specification. |
| 138 | Supply and fix ceiling fan 1200 mm sweep, Energy Saving models, Pearl white / white in colour 350 RPM, 220 volt 50 Hz complete with canopy, down rod. Fan blade, complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Enginee-in-Charge. Make : Havells (model No ES - 40 ) or equivalent item of other specified makes as given in appendix "B" to Particular Specification. |
| 139 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core, laid in trenches / duct / fixing on walls / poles or passing through pipe including connecting with suitable lugs, glands, nuts and bolts and testingincluding connecting with suitable lugs, glands, nuts and bolts in existing Panelfrom pole/ Main Panel Box and testing , incl dismantling of old unserviceable cable any size & type complete all as specified and directed. |
| 140 | M&L for HDPE Double Wall Corrugated pipe of size 32mm outer dia and 25mm inner dia confirming to IS:14930 Part-IIincluding necessary pipe fittings such as couplers, end caps, bend etc. laid in trenches/ fixed to wall with suitable clamps for cable protection complete all as specified and directed. |
| 141 | S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws etc. complete all as specified and directed. |
| 142 | Supply and fix 18x19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white white lamination fixed with screws to timber framewok as in cupboards complete all as specified and directed. Note: Cover fillets and timber framework if reqd is deemed to be included in quoted rates. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
