Military Engineer Services-MES has published 82483 Addition And Alteration To Galley, Store Room And Allied Works At Ins Adyar Under Age (I) Navy Chennai Addition And Alteration To Galley, Store Room And Allied Works At Ins Adyar Under Age (I) Navy Chennai. Submission Date for this Tender is 10-12-2021. Building Work Tenders in CHENNAI Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed |
| 2 | Demolition of reinforced cementConcrete of any description and in anypositionnot otherwise specifically provided for complete all as specified and as directed. |
| 3 | Demolition ofcement concrete(un-reinforced) of any description and in anypositionnot otherwise specifically provided for complete all as specified and as directed. |
| 4 | Demolition of Brickwork built in cement mortar, stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 5 | Material and Labour for brick work with fly ash Bricks Old size bricks in cement mortar 1:6 straight or curved on plan exceeding 6.00 m mean radius complete all as specified and directed. |
| 6 | Material and Labour forbrick work with fly ash Half bricks old size bricks in cement mortar 1:4 straight or curved on plan exceeding 6.00 m of half brickcomplete all as specified and directed. |
| 7 | Dismantling floor hearth or wall tiling including cement mortarbedding and rubbish off the premises all as specified and as directed. |
| 8 | Material and Labour for Non- skid pin handed ceramic coloured tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6. complete all as specified and directed |
| 9 | Material and Labour for Non-skid Ceramic colouredtiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.36 Sqm but not exceeding 0.38 Sqm, (600x600mm) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in CM 1:6.complete all as specified and directed |
| 10 | Material and Labour for glazed ceramic coloured design tiles 450x300mm x 7mm thick invertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat of CM 1:4etc complete all as specified and directed |
| 11 | Material and Labour for18-20 mm thick green Marble of any shade (table rubbed and polished)laid and jointed in flooring strips, window cills and jambsetc over and including 15mm thick screed bed/ backing coat in CM 1:4 complete all as specified and directed |
| 12 | Taking down chowkhats with shutters (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all as specified and directed. |
| 13 | Taking down chowkhats with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 sqm each complete all as specified and directed. |
| 14 | Supply and Fix for solidPVC door frame of size 50mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete all as specified and directed. |
| 15 | Supply and Fix for factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2,4 or 6 raised panel designed with 4mm thick moulded PVC sheet on front face and 4mm plain colour PVC sheet on back face as per specification with wood free EPS and drawing complete all as specified and directed. |
| 16 | Supply and Fix for 75mm long SS butt hinges heavy weight ,and fixed to frame with screwed or welding complete all as specified and directed. |
| 17 | Supply and Fix for 150mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 18 | Supply and Fix for 100mm long aluminium handle cast type anodized all as specified and as directed by Engineer-in-Charge. |
| 19 | Supply and Fix for 300mm aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruded section or cast aluminium alloy and fixed complete all as specified and directed. |
| 20 | Supply and Fix for Aluminiumdoors, powder coated (of approved colour), with frame of section 100 x 44mm x 2.5mm thick and shutter with bottom rail of section 150 x 44.5 x 2.5mm thick, middle rail of section 85 x 44.5 x 2.5mm thick and top rail of section 80.4 x 44.5 x 2.5mm thick and styles of section 80.4 x 44.5 x 2.5mm thick with 5mm thick glass (plain/tinted/with laminated film) or prelaminated board fixed in position with aluminium beading including necessary rubber gaskets and 2 Nos. aluminium push plate handle of aluminium section 150mm wide and 2.5mm thick including 150mm aluminium tower bolt, brass mortice lock, Hydraulically regulated heavy duty floor springcomplete all asspecified and directed. |
| 21 | Supply and Fix forAluminium powder coated (powder coated of required colour) three track sliding windows frame top & sides of size 92x31.75x1.50mm (section No 20831), bottom size 92x31.75x1.50mm (section No 20832) and shutter top & bottom of size 40x18x1.55mm (section No 20736) and sides (handle) of size 40x18x1.55mm (section No 20738) and lock side shutter frame of size 40x18x1.45mm ( section No 20737)" with rubber gasket, beading and locking arrangement and rollers etc including making good to the disturbed portion complete including aluminium wire mesh 0.45mm nominal dia of wire with 1.40mm average aperture and fixed with aluminium wire staples and fixing 5 mm thick selected quality glass with necessary rubber beading gasket etc all as specified and as directed by Engr-in-charge |
| 22 | Material and Labour for aluminium Powder coated ventilator, louvers type, frame top & bottom of size 31x42x1.60mm (section No 20558) rectangular tub of size 40x20x2mm (section No 14019 and middle vertical of size 42x46.20x1.60mm Section (20560) and clip for fixing wire mesh and glass of size 19x17.30x0.90mm (section No 19360) thick includingaluminium wire cloth 0.45mm nominal dia of wire and 1.40mm average width of aperture and fixed with aluminium wire staples and supply and fixing 5mm thick frosted/pinheadedglass louvers with blades of 100mm heavy duty with necessary rubber beading, gasket etc all as specified and as directed by Engineer-in-Charge. |
| 23 | Supply and Fix Aluminium powder coated frame for Aluminium powder coated sliding three track windows offrame top & sides of size 92x31.75x1.50mm (section No 20831),bottom size 92x31.75x1.50mm (section No 20832) including joining cleat for fixing EPDM rubber/ neoprene gasket requiredwith extruded built up standardsections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom etc. complete all as specified and directed. Note :Thickness of powder coating shall not be less than 50 micron. |
| 24 | Material and labour Aluminium powder coated sliding windows (powder coated of required colour)of shutter top & bottom of size 40x18x1.55mm (section No 20736) and sides (handle) of size 40x18x1.55mm (section No 20738) and lock side shutter frame of size 40x18x1.45mm ( section No 20737)" with rubber gasket, beading and locking arrangement and rollers etc including making good to the disturbed portion completewith including joining cleat for fixing EPDM rubber/ neoprene gasket requiredwith extruded built up standardsections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom etc. complete shall as specified. etc all as specified and as directed by Engr-in-charge. Note : Wire mesh and glass pane shall be measured and paid for separately and thickness of powder coating shall not be less than 50 micron. |
| 25 | Supply and Fix for aluminium Powder coated ventilator, fixed type shutter frame top ,bottomand sides of rectangular tub of size 75x25x1.03mm (section No 14019)and fixing of glass ofglazing strap of size 44.45x3.07x0.57mm(section No19368), glazing clips of size 19x17.30x1.2mm (section No 19377) aluminium wire staples 12.20x19.8x1.2 (section No 19365) heavy duty louvers type, with blades of 100mm heavy duty with including joining cleat for fixing EPDM rubber/ neoprene gasket requiredwith extruded built up standardsections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom etc. complete shall as specified. and fixing of wire mesh to be provided out side of the ventilatoras specified etc all as specified and as directed by Engineer-in-Charge. Note : Wire mesh and glass pane shall be measured and paid for separately and thickness of powder coating not less than 50 micron. |
| 26 | Supply and Fix forAnodised aluminium grill DG 102 of 10 mm dia rod square/rectangular/circular or similar type of shape aperture/ width10 mm and 5.2 mm dia fixed with H or F channel 38 x 12 mm aluminium frame with grill complete all as specified. |
| 27 | Taking down cement Plaster , any description, on brick walls or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 28 | Material and Labour for15mm thick Rendering in two coats of (10 mm thick on first coat and 5mm thick in second coat) on fair faces of brick work or concrete surfaces in CM (1:4) using with WPC @ 3% by wt of cement on second coat complete all as specified and directed. ( Note : WPC shall be measured and paid separately) |
| 29 | Material and Labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even and smooth complete all as specified and directed. |
| 30 | Material and Labour forrendering 10 mm thick on the ‘other’ side of lathing in CM 1:3 onceiling surfaces finishing with even and smooth (with out using extra cement)etc complete all as specified and directed by EIC. |
| 31 | Material and Labour for machine cut kota stone slab flooring 20 - 25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15 mm thick screed bed in CM 1:6. complete all as specified and directed |
| 32 | Material and Labour formachine cut Pre polished kota stone16-18 mm thick (single piecein raiser of steps with treadsround nosing with three numbers of serration as in treads of steps), skirting, dado and pillarlaid andjointed with grey cement slurry including cutting and mirror polishing over and including 10 mm thick screed bed/ backing coat in CM 1:4complete all as specified and directed |
| 33 | Material and Labour for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including cutting for the shapefor SS Sink etc complete all as specified. |
| 34 | Material and Labour for 20 mm thick machine cut, Granite stone slab (of any type)(table rubbed and polished) in steps, jambs, pillars, windows, cills, cooking platforms and like in cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting andpolishing types and making mould on edges & including cutting for the shapefor SS Sink& including 15 mm thick screed bed in CM 1:6 complete all as specified. |
| 35 | Material and Labour for 16 mm thick machine cut, Granite stone slab (of any type)(table rubbed and polished) for wall lining ( veneering to wall) 10mm thick in cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting andpolishing types and making mould on edges as required at site complete all as specified and as directed |
| 36 | Supply and Fix for 50mm dia bore pipe low density LDPE fixed to wall, ceiling or in floors etc complete all as specified and as directed |
| 37 | Supply and Fixin repairs for 110mm dia PVC pipesingle socketed in any length with rubber joints fixed to walls with Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts every 1.5mtr interval and securing ends of stays to wall or roof including scaffolding up to height G+5 complete all as specified and directed. |
| 38 | Ditto as in item No. 37but for75 mm bore pipecomplete all as specified and directed. |
| 39 | Supply and Fix PVCbends any radius bore of dia 110mm with access door all as specified. |
| 40 | Supply and Fixin repairs for 75mm dia PVC pipesingle socketed in any length with rubber joints laid in trenches or in floors complete all as specified and directed. |
| 41 | Supply and FixPVCbends any radius bore of dia 110mm complete all as specified and directed. |
| 42 | Supply and FixPVCbends any radius bore of dia 75mm with access door complete all as specified and directed. |
| 43 | Supply and FixPVC (SWR) branch piece, single/ double T) equal or unequal of 110 mm with access door complete all as specified and directed. |
| 44 | Supply and FixPVC (SWR) branch piece, single/ double T) equal or unequal of 75 mm with access door complete all as specified and directed. |
| 45 | Supply and Fix for PVC (SWR) vent cowl of 110 mm complete all as specified and directed. |
| 46 | Supply and Fix for 110mm PVC( SWR) WC connector with lip ring. of reqd length complete all as specified and directed. |
| 47 | Material and labour for Vitrified light shade ceramic tiles 10mm thick (square/rectangular) area of each tileexceeding 0.36 sqmin floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match for double charged tiles over 15 mm thick screed bed or bedding layer for laying floor finishes in CM (1:6) complete all as specified and directed |
| 48 | Description same as Item No.47 above but as in skirting/dado including backing coat in 10mm thick cement mortar 1:4 complete all as specified and directed by Engineer-in-charge. |
| 49 | Taking up & down steel tubing bore of pipe 15 mm connections, including cleaning and removal to store complete all as specified and directed. |
| 50 | Ditto as in item No. 49 but for20 mm dia, complete all as specified and as directed |
| 51 | Ditto as in item No. 49 but for25/32 mm dia, complete all as specified and as directed |
| 52 | Supply and Fix20 mm outer dia 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and composite pressure pipes including all Crimp type internal sealing Plastic metal Composite fittings (such as elbows, tees, reducers, couplers, short pieces, connectors, etc.) and hooks (in case of concealed pipe work)/ clamps (in case of exposed pipe work) etc complete all as specified. having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified. |
| 53 | Ditto as in item No. 52but for25 mm dia complete all as specified and directed. |
| 54 | Ditto as in item No.52 but for32 mm dia complete all as specified and directed. |
| 55 | Supply and Fix for20mm outside dia PPR Gate valves (brass insert) as per requirement of sitefixed to PPR pipescomplete all as specified. |
| 56 | Ditto as in item No. 55but for25 mm outside dia complete all as specified and as directed |
| 57 | Ditto as in item No. 55but for 32 mmoutside dia complete all as specified and as directed |
| 58 | Supply and Fix in repair for stainless steel sink 1mm thick with drainage board for kitchen with plugs, washers and wastes coupling 40mm; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge. |
| 59 | Supply and Fix for 18/19 mm thick marine plywood fixed with nails/ screws to frameworks as in cabinets cupboards with SS angles cleats etc complete all as specified and as directed. |
| 60 | Ditto all as per item No-59 but 6mm thick complete all as specified and as directed. |
| 61 | Supply and Fix forwhite laminates of 0.8mm thick glossy finishcolour and pattern as approved adhesive complete all as specified and directed |
| 62 | Supply and Fix fordecorative laminates of 1mm thick glossy finish, colour and pattern as approved adhesive complete all as specified and directed |
| 63 | Supply and fix for CP decorative type Brass handles, cast type, polished bright handles 75mm long fixed to plywood or framecomplete all as specified and directed |
| 64 | Supply and Fix for cupboard knob brass polished 40mm dia fixed with screwed and washer of mild steel complete all as specified and directed. |
| 65 | Supply and Fix formagnet and connected plate to shutter and frame as per sample approved all as specified and directed |
| 66 | Supply and Fix for80mm Auto SS hinges ofcrank 0 degree to 90degree, fixed with screws to plywood or frame workcomplete all as specified and as directed as per sample approved all as specified and directed |
| 67 | Supply and Fix forHasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws for 150 mm size complete all as specified and as directed. |
| 68 | Dismantling of wrought or MS work of any description complete all as specified and directed. |
| 69 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed. |
| 70 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed |
| 71 | Material and labour for anodised aluminium snap grid frame work for false ceiling, size of grid 605 x 605 mm, complete all as specified and directed. |
| 72 | Material and labour for Hangers 6 mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed. |
| 73 | Material and labour for Exposed Aluminium snap grid frame ceiling withmineral fibre boardfor fixing in 600 mm x 600 mm grid complete all as specified and directed. Note : Frame work forceiling shall be measured and paid separately. |
| 74 | Excavating over areas and getting out in soft/loose soils n exc 1.5m deep and getting out soft/loose soil complete all as specified and as directed |
| 75 | Excavating over area and getting out in soft/loose soils exc 1.5m not exceeding 2.00mdeep and getting out soft/loose soil complete all as specified and as directed |
| 76 | Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundation etc or for shafts, wells etc not exceeding 10 Sqm on plan and not exceeding 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed |
| 77 | Material and Labour for Cement concrete type D-2, 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete. complete all as specified and as directed |
| 78 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and as directed. |
| 79 | Removing excavated materialexceeding 250m & not exceeding 500m depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed |
| 80 | Material and Labour for Antitermite treatment at the bottom and sides of excavation at the rate of 5 ltrs of emulsion per sqm of surface area complete all as specified and as directed. |
| 81 | Material and Labour for Antitermite treatment at the backfill in contact with foundationat the rate of 7.5 ltrs of emulsion per sqm of vertical surface area complete all as specified and as directed |
| 82 | Supply and Fix for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, and hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed |
| 83 | Supply and Fix formild steel TMT bars 6-8 mm dia and over, cut to length, bent to shape required, and hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed |
| 84 | Supply and Fix formild steel TMT bars 6 mm dia over upto and including 10 mm dia in stirrups, spaces and binders and over, cut to length, bent to shape required, and hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 85 | Material and Labour for RCC M-25 ( Design mix)(using 20mm graded aggregates) as in foundations, footings, foundation beams , plinth beams, bases for columns etc basement slabs under reamed piles and mass concrete etccomplete all as specified and as directed. |
| 86 | Material and Labour for RCC M-25 ( Design mix)(using 20mm graded aggregates) as in Columns, pillars, piers post and struts etc complete all as specified and as directed |
| 87 | Material and Labour for RCC M-25 ( Design mix)(using 20mm graded aggregated) as in beams, cantilevers, bressummers, lintels over 1.5 m span and including Chajjas etc complete all as specified and as directed |
| 88 | Material and Labour for RCC M-25 ( Design mix)(using 20mm graded aggregated) as in slab supported on walls, Roof beams and columns in floors, deck slabs and in shelvesetc complete all as specified and as directed |
| 89 | Material and Labour for Use and waste of form work to foundations, footings, foundation beams, plinth beams, bases for columns etc basement slabs under reamed piles rough finishedsurfaces of concrete of flat for RCC works etccomplete all as specified and as directed |
| 90 | Material and Labour for Use and waste of form work to sides of pillars, posts struts, piers, columns etc rough finishedsurfaces of concrete of square, rectangular etc for RCC works etccomplete all as specified and as directed |
| 91 | Material and Labour for Use and waste of form work to sides/ bottom of concrete TB/RB beamscantilever lintels , shelves rough finishedsurfaces of concrete of flat for RCC works etccomplete all as specified and as directed |
| 92 | Material and Labour for Use and waste of form work to soffit of suspended slab as roof stabs, floor stabs, landing and similar work not exceeding 200mm thick, rough finished surfaces of concretecomplete all as specified and as directed |
| 93 | Material and Labour for spreading, levelling and well ramming including watering required in layers not exceeding 25 cm thickcomplete all as specified and directed |
| 94 | Material and Labour for treating the top surface of filled earth of flooring and under plinth protection at the rate of 5 ltrs of emulsion per sqm ofsurface area complete all as specified and as directed |
| 95 | Material and Labour for Antitermite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed |
| 96 | Material and Labour for Hard core of gauge n exceeding 63 mm deposited spreader and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface of broken stones or boulders etc complete all as specified and as directed |
| 97 | Material and Labour for 100 mm thick PCC 1:4:8 type D2 (40mm graded aggregate) as in sub base of flooring complete all as specified and directed |
| 98 | Material and Labour for Rendering 10mm thick in CM(1:3) oncement concrete surfaces on the top of roof surfaces with water proofing compound to receive water proofing treatment all as per manufacturer instructions. (Note:- WPC will be measured and paid separately. |
| 99 | Supply only Integral water proofing compound complete all as specified and as directed |
| 100 | Material and labour for applying cold bituminous primer @ 0.30 Ltr / Sqm conforming to IS 3384 and laying industrial bitumen 85/25 @ 1.2 kg/ sqm including cleaning surface and fixing of 3mm thick APP polymer modified membrane min3.0 Kg/Sqm in weight with non-woven polyester reinforcement and sealing all overlaps of 100mm in length side and 150mm on width side of membrane by torching the same as per manufacture instruction and including applying a coat of solar reflected aluminium paint over APP membrane complete all as specified and as directed |
| 101 | Material and labour of Preparation of new surfaces of wall andapplying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali and fungal resistant, dirt resistant exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. and over2mm thick exterior Birla wall care putty in two layers all as per manufacturer instruction and including necessary scaffoldings upto G+4etc complete all as specified and directed. |
| 102 | Material and labour for preparation of newly plastered / concrete surfaces and applying two coats of oil bound distemper over a coat of primer over one or more coat of Birla wall care putty complete all as specified and directed. |
| 103 | Material and Labourfor preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed. |
| 104 | Supply and Fix forFancy type CP bib taps 15 mm dia ,chromium plated cast copper alloy with half turn type capstan heads, screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed |
| 105 | Supply and Fix forFancy type CP stop/angular cock 15mm dia cast copper alloy, chromium plated fancy type screwed down high pressure withhalf turn of capstan heads, screwed both end for iron pipe or for unions and fixed. complete all as specified and directed |
| 106 | Supply and Fix for75 mm dia outlet PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed. |
| 107 | Supply and Fix for100x100 mm size outlet Salt-glazed stoneware Gully trapwith CI grating including jointing with solvent cement complete all as specified and directed. |
| 108 | Supply and Fix in repairs for, vitreous China squatting pan, Orissa pattern, size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including all necessary fitting complete all as specified and directed. |
| 109 | Supply and Fix forFancy type CP stop valve 15mm dia cast copper alloy, chromium plated fancy type with long shank and cup (concealed type)screwed down high pressure with half turn type capstan heads, screwed both end for iron pipe or for unions and fixed complete all as specified and directed |
| 110 | Supply and Fix for 32 mm Low density polyethylene (LDPE) pipes of pressure rating 6kgf/Sqcm complete all as specified. |
| 111 | Supply and Fix for stainless steel sink 1mm thick made of stainless steel for kitchen or laboratory with plugs, washers and wastes; including 40mm waste coupling , bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 600mm x 450mm bowl size 510mm x 330mm x 230mm complete all as specified and as directed |
| 112 | Supply and Fix for 125 mm dia Fancy type CP shower rose complete all as specified and directed . |
| 113 | Supply and Fixin repairfor low level flushing cistern 10 ltrs capacity body moulded from virgin quality high impact poly propoliyone and functional parts moulded from engineering grade ABS nylon and nylon glan complete incl brackets and 15mm bore 450mm long PVC connection complete all as specified and as directed |
| 114 | Supply and Fix 600mm long Brass CP towel rail with hook all as specified and as directed by Engineer-in-Charge. |
| 115 | Supply and Fix SS shop dish of size 100mm complete all as specified and as directed |
| 116 | Supply and Fixin repairfor 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and as directed. . |
| 117 | Dismantling and refixing of SS Wall panelling of any thickness, and including provision of SS Buttons / Gas Soldering and after renovation of galley and fixed on same position complete all as specified and as directed |
| 118 | Material and labour for Ready Mix Micro concrete of25 to 40 mm thick consistency of Renderoc S2 or Renderoc RG of FOSROCin consistency a batch of25kg of Renderoc mixed with watern exc 3.50 Ltrs and mixed with 1 kg of polymer acrylic fibersall as per manufacturer"s instructions andfinished the surfaceseven and smooth with 10mm thick rendering in CM 1:4complete all as specified and directed by Engr-in-Charge including erectingnecessary scaffolding (UP to G+5 Story ) Note:- (a) The following stages (a) to (d) are included of Materials and labourwill be carried out :- |
| 119 | (a) Taking out existing unserviceable plaster loose/unsound weaken cement concrete of any description and in any position from existing surface of RCC roof slab/beam/column/RCC facia /RCC chajja with power driver of pneumatic chisel after cleaning of concrete/plastered particlesand Removing corrosion and all loose scales rust etc from the visible reinforcement and cleaning the steel reinforcement properly. |
| 120 | (b)Applying one or more coat of NITO ZINK primer of FOSROC or equivalent ZINK primer of CHEMISTIC/WEBAC on visible reinforcement surface. Several time prior to placing, the concrete substrates should be saturated with clean water in case reinforcement completely rusted then remove or cut to length |
| 121 | (C) After drying of water to applying bonding agent of modified styrene butadiene emulsion (SBR bonding agent i.e.Nito bond SBR Latex or Nito bond EP of FOSROC) in proportion 1 (Nito bond SBR latex): 1 (water): 3 (OP cement) by volume with the brushing etc to bind New CM plaster / Polymer Modified plaster / Concrete / Screed concrete with old surface.. |
| 122 | (d) Providing fiber mesh jali fixed to existing RCC roof slab/beam/column/RCC facia /RCC chajja as per directed by Engr-in- Charge |
| 123 | Supply and Fix rotational moulded polyethylene water storage tank of 1000 ltrs capacity (cylindrical vertical with closed top) including dismantling of existing tank including all fittings i.e. tank nipple,of 25mm dia Ball brass valves, high pressure, with polythene float and fly nutetc hoisted and fixed in position all as specified. |
| 124 | Supply and Fixrotational moulded polyethylene water storage tank of double layers of 500 ltrs capacity (cylindrical vertical with closed top) including dismantling of existing tank including all fittings i.e. tank nipple, of 20 mm dia Ball brass valves, high pressure, with polythene float and fly nut etc. hoisted and fixed in position all as specified. |
| 125 | Supply and Fixrotational moulded polyethylene water storage tank of double layers of 750 ltrs capacity (cylindrical vertical with closed top) including dismantling of existing tank including all fittings i.e. tank nipple, of 20 mm dia Ball brass valves, high pressure, with polythene float and fly nutetc hoisted and fixed in position all as specified. |
| 126 | Supply and Fix in repairs EWC Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including heavy duty seat cover complete set complete all as specified. |
| 127 | Supply and Fixin repairforWash basins counter type, vitreous chinaof 550x400mm, including cutting for and pinning in ends of brackets or erecting stand inclusive of 32mm waste coupling and 1mtr waste pipe all as specified and as directed. |
| 128 | Supply and Fix PVC connections 15 mm size with PTMT nuts of length 600mm all as specified and as directed. |
| 129 | Supply and Fix for pillar taps, 15mm fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe of bore of pipefixed all as specified and as directed. |
| 130 | Supply and Fixin repairfor tubular towel rail, brass CP 20mm dia, "D" type, 60cm long between flanges made of brass chromium plated complete all as specified and as directed. |
| 131 | Supply and Fix for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 132 | Taking down shutters of any descriptionexc 1 sqm but not exc 2 Sqm each complete all as specified and as directed. |
| 133 | Supply and Fix 2nd class hard wood Plain, solid, straight, chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified. |
| 134 | Supply and Fix 35mm thick 2nd class hardwood of factory madePlain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified. |
| 135 | Supply and fix for 35 mm thick 2nd class hardwood factory made Glazed and skeletonfully and partially door shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkhats complete all as specified. |
| 136 | Supply and fix foraluminium wire cloth 0.45mm nominal dia of wire and 1.40mm average width of aperture and fixed with aluminium wire staples complete all as specified and directed. |
| 137 | Supply and Fix for 200mm long aluminium anodized barrel tower bolts of extruded section and fixed. |
| 138 | Supply and Fix for 150mm long aluminium handle cast type anodized all as specified and as directed by Engineer-in-Charge. |
| 139 | Material and Labourfor 10 mm thick rendering in CM (1:3)on ceiling on soffits and finished even and smooth (withoutusing extra cement) complete all as specified and directed |
| 140 | Material and Labourfor complete removal of existing surfaces including washing / rubbing down with water of wall and applying two coats of oil bound distemper/emulsion over coat of alkali resistant primer including chalk whiting over one or more coat of Birla wall care putty and including necessary scaffoldings as reqd etc complete all as specified and directed. |
| 141 | Material and Labourfor complete removal of existing treatment on walls including washing down, rubbing down and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. and over2mm thick exterior Birla wall care putty in two layers all as per manufacturer instruction and including necessary scaffoldings upto G+4etccomplete all as specified and directed. |
| 142 | Material and Labourfor preparation old decorated surfaces and applying one coat of white wash on ceiling complete all as specified and directed. |
| 143 | Material and labour for preparation of new wooden surfaces of any description over 10 Cm width or girth not otherwise described and applying two coats of Synthetic enamel painting over a coat of wood primer complete all as specified. |
| 144 | Ditto as in item No.139but one coat of synthetic enamel paint on old treated wooden surfaces. |
| 145 | Material and labour for preparation of old steel surfaces and applying one coat of Synthetic enamel paint on steel surfaces complete all as specified. |
| 146 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified. |
| 147 | Cutting holes in brick walls exc half brick but not exc one brick walls built in cement mortar for inserting holdfasts/ rafters /pipes etc and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as requiredall as specified and directed. |
| 148 | Supply and fix in repair foraluminium wire cloth 0.45mm nominal dia of wire and 1.40mm average width of aperture and fixed with aluminium wire staples complete all as specified and directed. |
| 149 | Supply and fix 28 mm dia aluminium powder coated tubular fancy type drapery rod with and including two nos of bracket/holders suitable for drapery 28mm dia rods of one window / door openings etc complete all as specified and as directed. |
| 150 | Removal of building materials/debris to a distance of 5KM each load capacity 6 cum per vehiclecomplete all as specified and directed. |
| 151 | Supply and Fixfor Plain selected quality glass 5.50 mm thick in glazing with rubber and aluminium beading/packing with rubber gasket complete as specified and directed. |
| 152 | Supply and Fix 5 mm thick sheet glass figured glass, pin head ,obscured or frosted, on one side type and aluminium glazingbeadsin square not exc 0.50 Sqm in each pane complete all as specified and directed. |
| 153 | Supply and Fix Stainless Steel Butt hinges medium weight for 75 mm size complete all as specified and directed. |
| 154 | Supply and Fix Stainless Steel Butt hinges medium weight for 100 mm size complete all as specified and directed. |
| 155 | Demolition of RCCof any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 156 | Material and Labour for Factory made Precastcement concreteType B1, 1:2:4 (using 20mm aggregate), as in cover slabs (for manholes etc.) chullah hoods, Chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed. |
| 157 | Material and Labour for providing and injecting ATT chemical at the point of contact of wood work by chemical emulsion (in oil or kerosene based solution) at the rate 0.5 liters/holes by drilling 6mm dia holes at a downward angle of 45 degree at 150mm center and sealing the same complete all as specified and directed. |
| 158 | Material and Labour for providing and injecting ATT chemical at the point of contact ofvoids in masonry walland floor joints using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed. Note:- Mode ofmeasurement shall be along the perimeter of walls of depth 500mm |
| 159 | Material and Labour for Removal of plantgrowth by injection with chemical glyphospate solution (4 % concentration) of 20ml or till refuse by cutting or injection in stem of plants or roots at 30mm deep. The area shall then be sprayed with solution 25ml glyphosphate (4% concent) diluted with 1 ltr of water. All roots / plants shall be removed completely and making good with cement concrete/mortar and finished the surfaces matching to existing surfaces of wall / floorwith acrylic paint all as directed by EIC.etc sectional areanot exc 0.10 Sqm each complete all as specified and directed. |
| 160 | Surface excavation not exceeding. 30 cm deep and averaging 15 deep and getting out in soft/loose soil complete all as specified and directed. |
| 161 | Material and Labour for 30 mm thick sand cushioning laid over sub base for fixing inter locking tiles complete all as specified and directed. |
| 162 | Material and Labour for Machine pressed precast concrete interlocking paver block any shape and size of 60 mm thickness, M-35 Grade and pointing with grey cement and pigment complete all as specified and directed |
| 163 | Material and Labour for Heavy duty Parking tiles 30cm x 30cm x 8 to10mm thick, set, jointed and pointed in near cement slurry in floors with grey cement and no pigment and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 164 | Material and Labour for 75 mm thick plain Cement concrete type C1, 1:3:6 (20mm grade aggregate)as in plinth protection finishing even and fair complete all as specified and directed. |
| 165 | Material and Labour for 25 mm thick machine cut, Granite stone slab (of any type) (table rubbed and polished) in steps, jambs, pillars, windows, cills, cooking platforms and like in cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting andpolishing types and making mould on edges and including cutting for the shapefor SS Sinkcomplete all as specified and directed. |
| 166 | Material and Labour for 20 mm thick machine cut, Granite stone slab (of any type) (table rubbed and polished) for wall lining (veneering to wall)in cement mortar 1:3 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting andpolishing types and making mould on edges as required at site complete all as specified and directed. |
| 167 | Material and labour for 25 mm thick Cement concrete (1:2:4)type B0 (using 12.5 mm grade aggregate) as in sub base to receive floor finishescomplete all as specified and directed. |
| 168 | Supply and Fix Vitrified ceramic tiles 10 mm thick (square/ rectangular) of double charged,area of each tileexc. 0.36 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6.complete all as specified and directed |
| 169 | Ditto as above item No. 164but as in skirting/ dado including backing coat of CM 1:4, 10 mm thick etc complete all as specified and directed. |
| 170 | Material and labour digital ceramic wall cladding tiles of size 148.5mmx150mmx10mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat in CM 1:4complete all as specified and as directed |
| 171 | Supply and Fix PVC (SWR) bends any radius bore of dia 75mm complete all as specified and directed. |
| 172 | Supply and Fix Gratings round or square with or without waste hole of PTMT 125mm size complete all as specified and directed. |
| 173 | Supply and Fix in repairs PVC health faucet 15 mm dia and 1mtr long including brackets for fixing complete all as specified and directed. |
| 174 | Supply and Fix 32 mm waste pipe for WHB of High density polyethylene (HDPE) pipes of pressure rating 6kgf/sq.cm complete all as specified and directed. |
| 175 | Supply and Fix12 mm thick Plywood with 7 no of ply , grade BWP, type BB fixed with screws to timber frame work as in shelves etc complete all as specified and directed. |
| 176 | Supply and Fix 0.90mm Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer"s instructions complete all as specified and directed. |
| 177 | Taking down DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified and as directed |
| 178 | Taking down carefully sub-main wiring of any description and making good to their disturbed surface to match the existing all as specified and as directed |
| 179 | Supply and fix for sub main wiring (concealed) complete with two single core 6sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 25mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 6sqmm FRLS PVC insulated unsheathed stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and as directed. Note: 3run of 4sqmm & one run of PVC conduit shall be measuredas single unit |
| 180 | Supply and fix for sub main wiring (concealed) complete with two single core 4sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 4sqmm FRLS PVC insulated unsheathed stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and as directed. Note: 3run of 4 sqmm & one run of PVC conduit shall be measured as single unit |
| 181 | Taking down carefully any type point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket etc. and making good disturbed surface of wall/floor, etc complete all as specified and as directed |
| 182 | Material and labour for Point wiring complete with FRLS PVC insulated unsheathed cable 1100V grade conforming to IS-694, 1.5 Sqmm(nominal area) multistranded with copper conductor drawn through and including non metallic rigid PVC conduit 20mm dia (ISI marked) andaccessories, concealed in wall / surface on ceiling excluding terminal boxes made out of 2mm mild steel sheet, of suitable module including provision of FRLS PVC insulated unsheathed 1.5 Sqmm FRLS multistranded cable 1100 V with copper conductor as earth continuity conductor and connecting to common earth dolly fixed to wall/ceiling/roof excluding modular metal box and white cover plate with frames, switches, sockets, regulators etc.. suitable for modular type fittings/ fixtures complete all as specified and as directed for the following:- |
| 183 | One light point controlled by one switch |
| 184 | One fan point controlled by one regulator/ switch |
| 185 | One exhaust fan point controlled by one switch |
| 186 | One bell/buzzer point controlled by one push button on same board |
| 187 | One switch socket outlet modular type 3pin 6amp on same board |
| 188 | One light point controlled by one two way switches, with cables |
| 189 | All as per item No.178 above butfor one 3pin socket outlet 6amps on Independent board, complete all as specified and as directed |
| 190 | All as per item No.178 above but 2.5sqmm cable size with 2.5sqmm earth continuity wire for one 3pin socket outlet, 16amps on Independent board, complete all as specified and as directed |
| 191 | Supply and fix switch modular type, Single pole one way 6amps complete all as specified and as directed |
| 192 | Supply and fix 0-4 step, one module, modular type electronic regulator for ceiling fan 1200mm sweep, 240volts, 100watts hum free single pole all as specified and as directed |
| 193 | Supply and fix bell push switch, modular type, 6Amps, 1module, 250volts all as specified and as directed |
| 194 | Supply and fixing calling bell ding dongtype, AC single pole one way 230 volts, complete all as specified and as directed |
| 195 | Supply and fix socket modular type 6Amps multistranded 240 volts all as specified and as directed |
| 196 | Supply and fix socket modular type single pole two way 6amps, 1module, 250 volts complete all as specified and as directed |
| 197 | Material and Labour for ceiling rose, surface Bakelite, 65x50mm, two to three terminals, complete all as specified complete all as specified and as directed. |
| 198 | Supply and fix switch modular type 16amps, 240 volts complete all as specified and as directed |
| 199 | Supply and fix socket modular type 16Amps, 3pin combined 2module, 240 volts complete all as specified and as directed |
| 200 | Supply and fix for Modular white cover plate with frame, 2 Module complete all as specified and directed. |
| 201 | Supply and fix for Modular white cover plate with frame, 3 Module complete all as specified and directed. |
| 202 | Supply and fix for Modular white cover plate with frame, 6 Module complete all as specified and directed. |
| 203 | Supply and fix for Modular white cover plate with frame, 8 Module complete all as specified and directed. |
| 204 | Supply and fix Modular Metal flush box, 2 module complete all as specified and as directed. |
| 205 | Supply and fix Modular Metal flush box, 3 module complete all as specified and as directed. |
| 206 | Supply and fix Modular Metal flush box, 6 module complete all as specified and as directed. |
| 207 | Supply and fix Modular Metal flush box, 8 module complete all as specified and as directed. |
| 208 | Supply and fix in repair wall mounted LED batten with decorative end cap of capacity 4 feet 20W or nearest higher wattage, 2500 lm , 6500 K suitable for Surface, wall & conduit mounting complete with all accessories intemally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and lamp complete all as specified and directed internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. (Make : C&S Cat Part No. LTTB4F20WLED/Wor equivalent as specified in PS |
| 209 | Supply and fix in repair LED light fitting , 2 feet 10 W or nearest higher wattage 230 suitable for Surface, Wall & Conduit mounting with extruded aluminium housing with integrated LED driver etc. Complete with all accessories internallypre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed, Make: C&S Electric Cat Part No:LTTB2F10WLED/W or equivalent as specified in PS |
| 210 | Supply and fixing sheet metal enclosures for SPN DB"s with metal double door for incorporating MCBs, IP-43, 8way with 200 amps rated bus bar, 240 volts as per IS-8623 complete all as specified and directed. |
| 211 | Supply and fix MCB SPN, 40Amps breaking capacity 10KA "B" curve confirming to IS/IEC 60898-12002, integrated label holder, sliding bottom clamp, IP 20 protected terminal, sliding shutters, 240volts, 50Hz including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc., complete all as specified and as directed |
| 212 | Supply and fix MCB SP, 10-32Amps breaking capacity 10KA "B" curve confirming to IS/IEC 60898-12002, integrated label holder, sliding bottom clamp, IP 20 protected terminal, sliding shutters, 240volts, 50Hz including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc., complete all as specified and as directed |
| 213 | Supply and fix power unit for 1.5/2 ton AC including connecting electric connections, complete all as specified and as directed. Make: Legrand Cat Part No.6755 58or equivalent as specified in PS |
| 214 | Material and Labour for Earthing complete with galvanised steel plate electrode, 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below nominal ground level) with top edge of the plate not less than not less than 1.5 metres below nominal ground level connected to earthing lead of 4 mm dia galvanised iron or steel wire all as shown in plate No. 4 of SSR PART 1 of 2009 to the earthing test point all as specified and as directed. Note :- the cost of excavation and earth work PCC pit and RCC cover funnel & watering pipe, wire mesh, charcoal dust and common salt earth lead protection pipe upto 7.5 Rm shall be deemed included in the unit rate for earthing complete all as specified and as directed |
| 215 | Material and labour for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 2mm dia galvanised iron or steel wire complete all as specified and as directed |
| 216 | Supply and Fix 20 mm outer dia 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 217 | Ditto as in item No. 206but for 63mm outer diacomplete all as specified and directed. |
| 218 | Ditto as in item No. 206but for 40mm outer diacomplete all as specified and directed. |
| 219 | Ditto as in item No. 206but for 32mm outer diacomplete all as specified and directed. |
| 220 | Supply and fix PP-R gate valve (brass insert) of size 63mm as per requirement at site complete all as specified and directed. |
| 221 | Supply and fix PP-R gate valve (brass insert) of size 40mm as per requirement at site complete all as specified and directed. |
| 222 | Supply and laying LT UG XLPE insulated of size 50 Sqmm 3.5 core 1100 volt grade heavy duty cable multi stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and connecting up to the electrical system with suitable size of aluminium lugs and including dismantling old one complete all as specified and directed. |
| 223 | Excavation in trenches in Soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5M in depth for laying of cables/pole and getting out of excavated material complete all as specified and directed. |
| 224 | Removing excavated soil to a distance not exceeding 50 mtrs and depositing where directed at a levelnot exceeding 1.5 mtrs above the starting point, complete all as specified and as directed. |
| 225 | Supply and fixing high density poythelyne (HDPE) pipes PN 10 of pressure rating 6kgf/sq./m of size 50mm for cable protection laid in trenches complete all as specified and as directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
