|
| 1 | VRF | PART-A: VRF EQUIPMENTS:SL.No.1.1: 8 HP outdoor unit. The outdoor unit shall meet minimum cooling requirement of 7 TR (21000 k cal/hr.)Makes: Voltas/ Blue star/ Carrier/ Carrier Midea/ O-General/ Mitsubishi/ Daikin/ ETA Gree/ Toshiba/ Hitachi/ Trane |
| 2 | OUTDOOR | PART-A OF SL.No.2.1:8 H.P. Outdoor Unit |
| 3 | MIN | PART-A OF SL.No.3.1:Minimum 2.0 TR Cassettee type units |
| 4 | TR | PART-A OF SL.No.3.2: Minimum 1.5 TR Cassettee type units |
| 5 | CORDLESS | PART-A OF SL.No.3.3: Supply of Cordless remote controls with LCD display for indoor units. |
| 6 | PANEL | PART-A OF SL.No.3.4:Supply and fixing of Decorative panels for Round flow Cassettee Type Indoor Units. |
| 7 | JOINTS | PART-A OF SL.No.4: Supply and laying of suitable Refnet joints with suitable insulation to take care of connectivity and circuiting as detailed above and as per Tender drawing. |
| 8 | CEILING | PART-A OF SL.No.5.1: VRF Ceiling suspended Cassettee indoor Units. |
| 9 | WIRING | PART-A OF SL.NO.6: Supply and laying of suitable size of control / communication wiring ofcopper cable through PVC conduit . Scope of work includes supply and fixing of PVC conduit with Clamps etc. |
| 10 | THICK | PART-A OF SL.No.7.1: 28.6 mm OD (Insulation = 19mm thick) |
| 11 | INSULATION | PART-A OF SL.No.7.2: 22.2 mm OD (Insulation = 13mm thick) |
| 12 | CLAMPS | PART-A OF SL.No.7.3: 19.1 mm OD (Insulation = 13mm thick) |
| 13 | SUPPORTS | PART-A OF SL.No.7.4: 15.9 mm OD (Insulation = 13mm thick) |
| 14 | BENDS | PART-A OF SL.No.7.5: 12.7 mm OD (Insulation = 13mm thick) |
| 15 | PIPES | PART-A OF SL.No.7.6: 9.5 mm OD (Insulation = 13mm thick) |
| 16 | CABLE | PART-A OF SL.No.7.7: 6.4 mm OD (Insulation = 13mm thick) |
| 17 | TRAY | PART-A OF SL.No.8: Supply, installation of GI tray with support for covering of exposed refrigerant pipe. Makes: Slottco/Profab Engineer/Hi-reach/MM Enterprises |
| 18 | GI | PART-A OF SL.No.9.1: 32 mm dia |
| 19 | UTRAP | PART-A OF SL.No.9.2: 25 mm dia |
| 20 | DRAIN | PART-A OF SL.No.10:Supply and installation of press fit casing Capping/PVC Trunking of size 100mm * 50mm along the exposed drain pipeline in the recess/ surface as required and as directed by NRSC. |
| 21 | POWRE | PART-A OF SL.No.11.1:PVC insulated 3C x 1.5 Sqmm Power cable (For VRF Indoor Units) |
| 22 | INSTALLATION | PART-A OF SL.No.11.2:XLPE insulated 4C x 6 Sqmm Power cable (For VRF outdoor Units) |
| 23 | CORE | PART-A OF SL.No.12: Minor civil works like foundations/ pedestals forOutdoor units and Core cutting/ cutting away, making and finishing good of openings in walls/ceiling etc.: for passage of pipes, ducts, cables, etc. complete as required. |
| 24 | SPLIT | PART-B: TOWER SPLIT AC:SL.No.1.1:Tower Split AC units with minimum 2 TR nominal capacity.Makes:Voltas/ Blue Star/ Carrier Midea/ Daikin/ Hitachi/Panasonic /Mitsubishi/Toshiba/ Trane/ O General /Lloyd |
| 25 | AC | PART-B OF SL.No.2.1:Suction Copper pipe line as per manufacturer recommendation. |
| 26 | LIQUID | PART-BOF SL.No.2.2:Liquid Copper pipe line as per manufacturer recommendation . |
| 27 | CONDENSATE | PART-B OF SL.No.3:Supply and erection of condensate drain pipe made out of 25mm (10 Kg/cm2) dia CPVC pipe, water \"U\" trap, pipe supports, clamps including nitrile rubber insulation. Makes: ASTRAL/ SUPREME |
| 28 | RUBBER | PART-B OF SL.No.4:Supply and installation of 75 mm durable PVC pipe with elbows, couplings/reducers as an enclosure for refrigerant copper pipes to protect against radiation, rain, wind and other external factors as required and as directed by NRSC. |
| 29 | ANGLES | PART-B OF SL.No.5:Supply and installation of MS Angles fabrication and all necessary clamps etc., for mounting of AC outdoor units, plenum, ductsas and when required as directed by NRSC etc. |
| 30 | POWDER | PART-B OF SL.No.6:Supply and installation of suitable height and thickness of powder coated floor mounted stands for AC indoor units |
| 31 | EARTHWIRE | PART-B OF SL.No.7.1:Suitable size of Power cable as per manufacturer recommendation |
| 32 | CEMENT | PART-B OF SL.No.7.2 :Suitable size of control cable as per manufacturer recommendation |
| 33 | RUNS | PART-B OF SL.No.7.3 :G.I. Earth wire of two runs of size 8 SWG |
| 34 | CONDUCTOR | PART-B OF SL.No.8:Supply and installation of covered type GI tray.Makes: Slottco/Profab Engineer/Hi-reach/MM Enterprises |
| 35 | PEDESTAL | PART-B OF SL.No.9:Minor civil works like making PCC pedestal and core cuttingfor good of openings, plastering, finishing with white cement in walls/ ceiling etc. for passage of refrigerant pipes, ducts along with repairof wooden wall panelling complete as required as directed by NRSC at site. |
