Ladakh Autonomous Hill Development Council-LAHDC has published Supply Installation And Commissioning Of Water Mill Installation Of Water Mill , The Bidder Must Quote Their Rate For Supply, Installation And Commissioning Of Electro Mechanical Water Mill With Following Requirements: - Turbine ( For Electrical /. Submission Date for this Tender is 11-12-2021. Retaining Hardware Tenders in Kargil Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | The bidder must quote their rate for Supply, installation and commissioning of Electro Mechanical Water Mill with following requirements: - Turbine (for electrical/mechanical or both type of output) including all accessories and required civil works (Cross flow/PAT, Runner dia = 0.20-0.30m). - VerticalAxis Runner including all accessories and required civil works (Mild Steel/Cast Iron/Stailess Steel). - Alternator (Synchronous Single Phase 240V, 50Hz, 1500RPM (1kW,2kW,3kW & 5kW)). - Drive System (Pulley(2Nos.),V-grooved,C.I. Pulley for deriving the generator and other machines, V Belt and Shaft Bearings). - Electronic Load Controller, Ballast load (Micro controller based ELC with digital display for output voltage and ballast load % display suitable upto 5 kW generator) - Monitoring, Protection, Control, Switchgear and metering panel (Control panel with Current, voltage, frequency meters, MCBs, PhaseindicatorandkWHmeter with all other required protections). - Floor Mill (ISI Marked) with accessories required for smooth running of machine including all accessories and required civil works. (foundation size 800 mm X 500 mm) – (Sizes 16/18” and 18/20”) - with other necessary requirements complete considering the Technical Specification given in the tender notice no. E-Tender-36 of KREDA 2021, Ref. No. KREDA/WM/2021/1855 dated 03.12.2021. on turnkey basis |
2 | The bidder must quote their rate for Supply, installation and commissioning of Mechanical Water Mill with following requirements: - Turbine (for mechanical output) including all accessories and required civil works (Cross flow/PAT, Runner dia = 0.20-0.30m). - VerticalAxis Runner including all accessories and required civil works (Mild Steel/Cast Iron/Stailess Steel). - Drive System (Pulley(2Nos.), V-grooved, C.I. Pulley for deriving the generator and other machines, V Belt and Shaft Bearings). - Floor Mill (ISI Marked) with accessories required for smooth running of machine including all accessories and required civil works. (foundation size 800 mm X 500 mm) – (Sizes 16/18” and 18/20”). - with other necessary requirements complete considering the Technical Specification given in the tender notice no. E-Tender-36 of KREDA 2021, Ref. No. KREDA/WM/2021/1855 date 03.12.2021 on turnkey basis. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail