Bids Are invited for SUSPENSION SEGMENT-0 ASSY,PD/R-169053 - SUSPENSION SEGMENT-0 ASSYMATERIAL:AS PER DRG/PART LISTDRAWING NO : PD/R-169053POSITION NO : 1-15 , SUSPENSION SEGMENT-0 ASSY,PD/R-169054 - SUSPENSION SEGMENT-0 ASSY,PD/R-169054MATERIAL:AS PER DRG/PART LISTDRAWING NO : PD/R-169054POSITION NO : 1-14 , BAR,C15,DWN:PD/R-169121 F/MOULD - BAR,C15,DWN:PD/R-169121 FOR MOULDDRAWING NO : PD/R-169121 , SADDLE BEARING ASSLY,DWN:PD/R-205381 - MOULD B/F SADDLE BEARING ASSEMBLY FOR CASTER 1,2 AS PER DRG.PD/R-169107 AND BOM PD/R-205381, CONSISTING OF FOLLOWING PART NOS AND PD/R DRGS: 1) PART-2, AXLE, PD/R- 169114 MATL: SS 1.4122QT WITHOUTCHROME PLATING,QTY- 01 NO 2) PART-3, COVER, PD/R- 169115 MATL: SS 304, QTY- 01 NO 3) PART-4, LOCK PLATE, PD/R- 169116 MATL: SS 304,QTY-01 NO 4) PART-12, BRG COVER TOP, PD/R- 169124 MATL: AS PER BOM,QTY-01 NO 5) PART-13, BRG COVER BOTTOM, PD/R- 169125R1 MATL: AS PERBOM,QTY-01 NO 6) PART-14, BUSH, PD/R- 169126 MATL: AS PER BOM,QTY-01 SET 7) PART-15, PROTECTION COVER, PD/R- 169127 MAT.- AS PER BOM,QTY-01 SET 8) PART-32,33 AND 34 SS HEX BOLT WITH NUT AND WASHER(M10X70MM), QTY-02 NOS 9) PART-29,30 AND 31 SS HEX BOLT WITH NUT AND WASHER (M16X210MM), QTY-02 NOS 10) PART-35, SPRING SLEEVE, MATL: AS PER BOM,QTY-02 NOS 11) PART-36, CHEESE HEAD BOLT M 10X25(12.9),QTY-04 NOS 12) PART-37, WASHER (ID 10.5,OD 25,THICKNESS 4MM) MATL: SS 304,QTY-04 NOS 13) PART-38, TUBE MATL: SS 304,QTY-02 NOS 14) PART-39,WIPER 100/110X7 MATL: VITON,QTY-02 NOS 15) PART-40, GREASE NIPPLE MATL: AS PER BOM,QTY-01 NO TO BE SUPPLIED IN ASSEMBLED CONDITION.DRAWING NO : PD/R-169107BILL OF MATERIAL : PD/R-205381 , COVER,55X420MM,DWN:PD/R-169475 - COVER,55X420MM,DWN:PD/R-169475MATERIAL:RST 37-2DRAWING NO : PD/R-169475 , PLATE,PRESSURE,DWN:PD/R-169120 F/MOULD - PLATE,PRESSURE,DWN:PD/R-169120 FOR MOULDMATERIAL:RST 52-3DRAWING NO : PD/R-169120 Total Quantity : 1
