Providing Open Gym Equipment At Lic Colony In Pedapalakaluru Village In Div No-40 Under Ae-2 Section Of Guntur Municipal Corporation-20.53 Sand Filling Of Foundation Trenches As Per Drawing And Technical Specification 305.3.9 Mord & 304 Morth 16.94 Earthwork In Excavation For Structures As Per Drawing And Technical Specifications Clause 305.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitable Material As Per Technical Specification 305 Mord / 304 Morth 24.82 Dust Filling Of Foundation Trenches As Per Drawing And Technical Specification In Clause 305.3.9 Mord & 304 Morth 10.00 Plain Cement Concrete ( 1:4:8 ) Using 40 Mm Metal With Concrete Mixture Including Cost And Conveyance Of All Materials, Labour Charges, Machine Mixing Charges, Curing Charges Etc., Complete As Per S.S. 16.94 Cc M-30 Nominal Mix ( Cement: Fineaggregate: Coarse Aggregate ) Corresponding To Table 9 Of Is 456 Using 20Mm Size Graded Machine Crushed Hard Granite Metal ( Coarse Aggregate ) From Approved Quarry Including Cost And Conveyance Of All Materials Like Cement, Fine Aggregate ( Sand ) Coarse Aggregate, Water Etc., To Site And Including Seigniorage Charges, Sales & Other Taxes On All Materials Including All Operational, Incidental And Labour Charges Such As Machine Mixing, Laying Concrete, Curing Etc., Complete But Excluding Cost Of Steel And Its Fabrication Charges For Finished Item Of Work 100.00 Flooring With Virtified Tiles Of 1St Quality, Set Over Base Coat Of Cm ( 1:8 ) , 12Mm Thick Over Cc Bed Already Laid Or Rcc Roof Slab, Including Neat Cement Slurry Of Honey Like Consistency Spread @ 3.3 Kg / Sqm & Jointed Neatly With White Cement Paste To Full Depth Mixed With Pigment Of Matching Shade, Including Cost Of All Materials Like Cement, Sand Water And Tiles Etc., Complete For Finished Item Of Work ( Bld-Cstn-7-5 ) - 10Sq.M. 180.00 Supply And Laying Of Poly Sheet 125 Microns Including Cost And Conveyance Of Materials And Labour Charges Complete. 0.00 Open Gym Equipment 0.00 Supply, Delivery, Installation And Commissioning Of Sky Walker / Double Cross Walker With Main Frame Shall Be Minimum Of 80Mm Nb Dia Of Thickness Not Less Than 4.50Mm & Handle Pipes Shall Be Minimum Of 25Mm Nb Dia Of Thickness Not Less Than 3.60Mm Are Of C Class Heavy Grade Of Tata / Jindal Make With Hot Dipped Galvanised With Minimum Of 75 Microns Zinc Dipped Joint With Robotic Welded With Plastic / Rubber Grips On Top End. The Handle Pipes Are Hinged Over 80Nb Main Frame With The Help Of Specially Heavy Duty Bearings Should Be Reputed Make And Press Fitted For Smooth Rotation, And Does Not Require Re-Lubrication I.E., Maintenance - Free Ball Bearing. The Handle Pipes Shall Be Further Extended To The 32Mm Nb Dia On Both Sides. Paired Rectangular Tubes With Four Foot Rests Are Linked To Main Frame. Foot Rest Shall Be Made Of Aluminum Material - Lm26 Grade. Total Structure Is Supported On Base Frame Shall Be Made Up Of Rectangular Pipe Of 50X50x3mm And Side Frames Shall Be Made Up Of 32Mm Nb Dia Gi Pipes. All Pipes Shall Be Uniformly Powder Coated Up To Minimum 100 Microns Thickness To Avoid Corrosion. All Open Ends Of Pipes, Bearings, Bushes And Base Cover Shall Be Closed By Ss 304 Grade Stainless Steel For Safety Against Entrapment, Corrosion & Water Resistant. The Foundation Pipe With Anchoring Shall Be 750Mm Deep With Minimum Of 100Mm Nb Dia Supported With M.S. Angle 25X25x4mm. The Instruction Plate Of Size 75Mmx150mm Of Ss 304 Grade Plate With 0.7Mm Thick Shall Be Riveted On 5Mm Thick Plate With Gmc Emblem And Your Company Emblem At Two Sides Facing To Users With Laser Printing. All Plastic Parts Should Solid Poly Propylene Co-Polymer ( Ppcp ) And Uv- Stabilized Should Be Used. All Products Of Equipment Should Be Manufactured As Per En 16630 Safety Norms And To Be Produced Proof Of Valid Certificate Conformity To En16630. 1.00 Double Cross Walker / Sky Walker ( 1700X610x1650 Mm ) ( ± 10% Tolerence Allowable ) 0.00 Supply, Delivery, Installation And Commissioning Of Tai Chi Spinner / Fore Arm Twirl Double With Center Pipe Shall Be Of Minimum 100Mm Nb Dia Of Thickness Not Less Than 5.00Mm, Support Frame Shall Be Minimum Of 32Mm Nb Dia Of Thickness Not Less Than 3.6Mm & Tai Chi Spinner Rings Shall Be Minimum Of 25Mm Nb Dia Of Thickness Not Less Than 3.60Mm Are Of C Class Heavy Grade Of Tata / Jindal Make With Hot Dipped Galvanised With Minimum Of 75 Microns Zinc Dipped Joint With Robotic Welded With Handle Knobs Are Made From High Quality Nylon Material. The Rings Are Hinged Over 32Nb Support Frame With The Help Of Specially Heavy Duty Bearings Should Be Reputed Make And Press Fitted For Smooth Rotation, And Does Not Require Re-Lubrication I.E., Maintenance - Free Ball Bearing. All Pipes Shall Be Uniformly Powder Coated Up To Minimum 100 Microns Thickness To Avoid Corrosion. All Open Ends Of Pipes, Bearings, Bushes And Base Cover Shall Be Closed By Ss 304 Grade Stainless Steel For Safety Against Entrapment, Corrosion & Water Resistant. The Foundation Pipe With Anchoring Shall Be 750Mm Deep With Minimum Of 100Mm Nb Dia Supported With M.S. Angle 25X25x4mm. The Instruction Plate Of Size 75Mmx150mm Of Ss 304 Grade Plate With 0.7Mm Thick Shall Be Riveted On 5Mm Thick Plate With Gmc Emblem And Your Company Emblem At Two Sides Facing To Users With Laser Printing. All Plastic Parts Should Solid Poly Propylene Co-Polymer ( Ppcp ) And Uv- Stabilized Should Be Used. All Products Of Equipment Should Be Manufactured As Per En 16630 Safety Norms And To Be Produced Proof Of Valid Certificate Conformity To En16630. 1.00 Tai Chi Spinner / Fore Arm Twirl Double ( 1200X500x1450 Mm ) ( ± 10% Tolerance Allowable ) 0.00 Supply, Delivery, Installation And Commissioning Of Double Health Walker / Aerial Stroller Double / Air Walker / Fun Walker Double With Three Prime Stand Pipes Shall Be Minimum Of 100Mm Nb Dia Of Thickness Not Less Than 5.00Mm, Pedestal Frame Shall Be Minimum Of 32Mm Nb Dia Of Thickness Not Less Than 3.6Mm & Handle Frame Shall Be Minimum Of 25Mm Nb Dia Of Thickness Not Less Than 3.60Mm Are Of C Class Heavy Grade Of Tata / Jindal Make With Hot Dipped Galvanised With Minimum Of 75 Microns Zinc Dipped Joint With Robotic Welded. The Two Pedestal Frames Are Hinged Over 100Nb Prime Stand Pipes With The Help Of Specially Heavy Duty Bearings Should Be Reputed Make And Press Fitted For Smooth Rotation, And Does Not Require Re-Lubrication I.E., Maintenance - Free Ball Bearing. Foot Rest Shall Be Made Of Aluminum Material - Lm26 Grade. All Pipes Shall Be Uniformly Powder Coated Up To Minimum 100 Microns Thickness To Avoid Corrosion. All Open Ends Of Pipes, Bearings, Bushes And Base Cover Shall Be Closed By Ss 304 Grade Stainless Steel For Safety Against Entrapment, Corrosion & Water Resistant. The Foundation Pipe With Anchoring Shall Be 750Mm Deep With Minimum Of 100Mm Nb Dia Supported With M.S. Angle 25X25x4mm. The Instruction Plate Of Size 75Mmx150mm Of Ss 304 Grade Plate With 0.7Mm Thick Shall Be Riveted On 5Mm Thick Plate With Gmc Emblem And Your Company Emblem At Two Sides Facing To Users With Laser Printing. All Plastic Parts Should Solid Poly Propylene Co-Polymer ( Ppcp ) And Uv- Stabilized Should Be Used. All Products Of Equipment Should Be Manufactured As Per En 16630 Safety Norms And To Be Produced Proof Of Valid Certificate Conformity To En16630. 1.00 Double Health Walker / Aerial Stroller Double / Air Walker / Fun Walker Double ( 2000X350x1500 Mm ) ( ± 10% Tolerance Allowable ) 0.00 Supply, Delivery, Installation And Commissioning Of Pull Down Challenger / Shoulder Exerciser Double With Prime Stand Pipe Shall Be Minimum Of 100Mm Nb Dia Of Thickness Not Less Than 5.00Mm, Handle Frame & Seat Frame Shall Be Minimum Of 32Mm Nb Dia Of Thickness Not Less Than 3.6Mm & Connecting Links Shall Be Minimum Of 25Mm Nb Dia Of Thickness Not Less Than 3.60Mm Are Of C Class Heavy Grade Of Tata / Jindal Make With Hot Dipped Galvanised With Minimum Of 75 Microns Zinc Dipped Joint With Robotic Welded. The Two Handle Frames Are Hinged Over 100Nb Prime Stand Pipe With The Help Of Specially Heavy Duty Bearings Should Be Reputed Make And Press Fitted For Smooth Rotation, And Does Not Require Re-Lubrication I.E., Maintenance - Free Ball Bearing. Seat & Back Rests Are Made With The Gi Sheet Of Size 330X330x2mm With Uniform Bending Radius To Avoid Sharp Edges. All Pipes Shall Be Uniformly Powder Coated Up To Minimum 100 Microns Thickness To Avoid Corrosion. All Open Ends Of Pipes, Bearings, Bushes And Base Cover Shall Be Closed By Ss 304 Grade Stainless Steel For Safety Against Entrapment, Corrosion & Water Resistant. The Foundation Pipe With Anchoring Shall Be 750Mm Deep With Minimum Of 100Mm Nb Dia Supported With M.S. Angle 25X25x4mm. The Instruction Plate Of Size 75Mmx150mm Of Ss 304 Grade Plate With 0.7Mm Thick Shall Be Riveted On 5Mm Thick Plate With Gmc Emblem And Your Company Emblem At Two Sides Facing To Users With Laser Printing. All Plastic Parts Should Solid Poly Propylene Co-Polymer ( Ppcp ) And Uv- Stabilized Should Be Used. All Products Of Equipment Should Be Manufactured As Per En 16630 Safety Norms And To Be Produced Proof Of Valid Certificate Conformity To En16630. 1.00 Pull Down Challenger / Shoulder Exerciser Double ( 1650X700x1850 Mm ) ( ± 10% Tolerance Allowable ) 0.00 Supply, Delivery, Installation And Commissioning Seated Chest Press / Chest Press Double With Prime Stand Pipe Shall Be Minimum Of 100Mm Nb Dia Of Thickness Not Less Than 5.00Mm, Handle Frame & Seat Frame Shall Be Minimum Of 32Mm Nb Dia Of Thickness Not Less Than 3.6Mm & Connecting Links Shall Be Minimum Of 25Mm Nb Dia Of Thickness Not Less Than 3.60Mm Are Of C Class Heavy Grade Of Tata / Jindal Make With Hot Dipped Galvanised With Minimum Of 75 Microns Ionized Coated And Zinc Dipped Joint With Robotic Welded. The Two Handle Frames Are Hinged Over 100Nb Prime Stand Pipe With The Help Of Specially Heavy Duty Bearings Should Be Reputed Make And Press Fitted For Smooth Rotation, And Does Not Require Re-Lubrication I.E., Maintenance - Free Ball Bearing. Seat & Back Rests Are Made With The Gi Sheet Of Size 330X330x2mm With Uniform Bending Radius To Avoid Sharp Edges. All Pipes Shall Be Uniformly Powder Coated Up To Minimum 100 Microns Thickness To Avoid Corrosion. All Open Ends Of Pipes, Bearings, Bushes And Base Cover Shall Be Closed By Ss 304 Grade Stainless Steel For Safety Against Entrapment, Corrosion & Water Resistant. The Foundation Pipe With Anchoring Shall Be 750Mm Deep With Minimum Of 100Mm Nb Dia Supported With M.S. Angle 25X25x4mm. The Instruction Plate Of Size 75Mmx150mm Of Ss 304 Grade Plate With 0.7Mm Thick Shall Be Riveted On 5Mm Thick Plate With Gmc Emblem And Your Company Emblem At Two Sides Facing To Users With Laser Printing. All Plastic Parts Should Solid Poly Propylene Co-Polymer ( Ppcp ) And Uv- Stabilized Should Be Used. All Products Of Equipment Should Be Manufactured As Per En 16630 Safety Norms And To Be Produced Proof Of Valid Certificate Conformity To En16630. 1.00 Seated Chest Press / Chest Press Double ( 1550X710x2150 Mm ) ( ± 10% Tolerance Allowable ) 0.00 Supply, Delivery, Installation And Commissioning Of Self Weighted Rower / Hand Rower With Base Link Pipe Shall Be Minimum Of 100Mm Nb Dia Of Thickness Not Less Than 5.00Mm, Upper Link Pipe Shall Be Minimum Of 50Mm Nb Dia Of Thickness Not Less Than 4.1Mm & Connecting Links & Handle Links Pipes Shall Be Minimum Of 25Mm Nb Dia Of Thickness Not Less Than 3.60Mm Are Of C Class Heavy Grade Of Tata / Jindal Make With Hot Dipped Galvanised With Minimum Of 75 Microns Ionized Coated And Zinc Dipped Joint With Robotic Welded. The Handle Frame Are Hinged Over 100Nb Base Link Pipe With The Help Of Specially Heavy Duty Bearings Should Be Reputed Make And Press Fitted For Smooth Rotation, And Does Not Require Re-Lubrication I.E., Maintenance - Free Ball Bearing. Seat Rest Is Made With The Gi Sheet Of Size 330X330x2mm With Uniform Bending Radius To Avoid Sharp Edges. All Pipes Shall Be Uniformly Powder Coated Up To Minimum 100 Microns Thickness To Avoid Corrosion. All Open Ends Of Pipes, Bearings, Bushes And Base Cover Shall Be Closed By Ss 304 Grade Stainless Steel For Safety Against Entrapment, Corrosion & Water Resistant. The Foundation Pipe With Anchoring Shall Be 750Mm Deep With Minimum Of 100Mm Nb Dia Supported With M.S. Angle 25X25x4mm. The Instruction Plate Of Size 75Mmx150mm Of Ss 304 Grade Plate With 0.7Mm Thick Shall Be Riveted On 5Mm Thick Plate With Gmc Emblem And Your Company Emblem At Two Sides Facing To Users With Laser Printing. All Plastic Parts Should Solid Poly Propylene Co-Polymer ( Ppcp ) And Uv- Stabilized Should Be Used. All Products Of Equipment Should Be Manufactured As Per En 16630 Safety Norms And To Be Produced Proof Of Valid Certificate Conformity To En16630. 1.00 Self Weighted Rower / Hand Rower ( 1200X1000x800 Mm ) ( ± 10% Tolerance Allowable ) 0.00 Supply, Delivery, Installation And Commissioning Elliptical Cross Trainer / Ovate Stepper With Prime Stand Pipe Shall Be Minimum Of 80Mm Nb Dia Of Thickness Not Less Than 4.50Mm, Pedel Link Pipe Shall Be Minimum Of 50Mm Nb Dia Of Thickness Not Less Than 4.1Mm, Handle Frame Pipes Shall Be Minimum Of 32Mm Nb Dia Of Thickness Not Less Than 3.60Mm And Handle Grips Shall Be Minimum Of 25Mm Nb Dia Of Thickness Not Less Than 3.60Mm Are Of C Class Heavy Grade Of Tata / Jindal Make With Hot Dipped Galvanised With Minimum Of 75 Microns Zinc Dipped Joint With Robotic Welded. The Pedal Frame Are Hinged Over 80Nb Prime Stand Pipe With The Help Of Specially Heavy Duty Bearings Should Be Reputed Make And Press Fitted For Smooth Rotation, And Does Not Require Re-Lubrication I.E., Maintenance - Free Ball Bearing. Foot Rest Shall Be Made Of Aluminum Material - Lm26 Grade. All Pipes Shall Be Uniformly Powder Coated Up To Minimum 100 Microns Thickness To Avoid Corrosion. All Open Ends Of Pipes, Bearings, Bushes And Base Cover Shall Be Closed By Ss 304 Grade Stainless Steel For Safety Against Entrapment, Corrosion & Water Resistant. The Foundation Pipe With Anchoring Shall Be 750Mm Deep With Minimum Of 100Mm Nb Dia Supported With M.S. Angle 25X25x4mm. The Instruction Plate Of Size 75Mmx150mm Of Ss 304 Grade Plate With 0.7Mm Thick Shall Be Riveted On 5Mm Thick Plate With Gmc Emblem And Your Company Emblem At Two Sides Facing To Users With Laser Printing. All Plastic Parts Should Solid Poly Propylene Co-Polymer ( Ppcp ) And Uv- Stabilized Should Be Used. All Products Of Equipment Should Be Manufactured As Per En 16630 Safety Norms And To Be Produced Proof Of Valid Certificate Conformity To En16630. 1.00 Elliptical Cross Trainer / Ovate Stepper ( 1200X500x1500 Mm ) ( ± 10% Tolerance Allowable ) 0.00 Supply, Delivery, Installation And Commissioning Horse Rider / Aero Rider With Main Frame Shall Be Minimum Of 100Mm Nb Dia Of Thickness Not Less Than 5.00Mm, Handle Frame & Seat Frame Shall Be Minimum Of 32Mm Nb Dia Of Thickness Not Less Than 3.6Mm & Connecting Link Pipes Shall Be Minimum Of 25Mm Nb Dia Of Thickness Not Less Than 3.60Mm Are Of C Class Heavy Grade Of Tata / Jindal Make With Hot Dipped Galvanised With Minimum Of 75 Microns Zinc Dipped Joint With Robotic Welded. The Handle Frame Are Hinged Over 100Nb Main Frame With The Help Of Specially Heavy Duty Bearings Should Be Reputed Make And Press Fitted For Smooth Rotation, And Does Not Require Re-Lubrication I.E., Maintenance - Free Ball Bearing. Seat & Back Rests Are Made With The Gi Sheet Of Size 330X330x2mm With Uniform Bending Radius To Avoid Sharp Edges. All Pipes Shall Be Uniformly Powder Coated Up To Minimum 100 Microns Thickness To Avoid Corrosion. All Open Ends Of Pipes, Bearings, Bushes And Base Cover Shall Be Closed By Ss 304 Grade Stainless Steel For Safety Against Entrapment, Corrosion & Water Resistant. The Foundation Pipe With Anchoring Shall Be 750Mm Deep With Minimum Of 100Mm Nb Dia Supported With M.S. Angle 25X25x4mm. The Instruction Plate Of Size 75Mmx150mm Of Ss 304 Grade Plate With 0.7Mm Thick Shall Be Riveted On 5Mm Thick Plate With Gmc Emblem And Your Company Emblem At Two Sides Facing To Users With Laser Printing. All Plastic Parts Should Solid Poly Propylene Co-Polymer ( Ppcp ) And Uv- Stabilized Should Be Used. All Products Of Equipment Should Be Manufactured As Per En 16630 Safety Norms And To Be Produced Proof Of Valid Certificate Conformity To En16630. 1.00 Horse Rider / Aero Rider ( 1000X700x1000 Mm ) ( ± 10% Tolerance Allowable ) 0.00 Supply, Delivery, Installation And Commissioning Of Hd Waist Twister / Tripple Twister With Prime Pipe Shall Be Minimum Of 100Mm Nb Dia Of Thickness Not Less Than 5.00Mm, Standing Twister Plate Support Pipe Shall Be Minimum Of 80Mm Nb Dia Of Thickness Not Less Than 4.5Mm, Bottom Frame Support Shall Be Minimum Of 32Mm Nb Dia Of Thickness Not Less Than 3.6Mm & Handle Ring Shall Be Minimum Of 25Mm Nb Dia Of Thickness Not Less Than 3.60Mm Are Of C Class Heavy Grade Of Tata / Jindal Make With Hot Dipped Galvanised With Minimum Of 75 Microns Zinc Dipped Joint With Robotic Welded. The Twister Plate Is Hinged Over 80Nb Standing Pipe With The Help Of Specially Heavy Duty Bearings Should Be Reputed Make And Press Fitted For Smooth Rotation, And Does Not Require Re-Lubrication I.E., Maintenance - Free Ball Bearing. All Pipes Shall Be Uniformly Powder Coated Up To Minimum 100 Microns Thickness To Avoid Corrosion. All Open Ends Of Pipes, Bearings, Bushes And Base Cover Shall Be Closed By Ss 304 Grade Stainless Steel For Safety Against Entrapment, Corrosion & Water Resistant. The Foundation Pipe With Anchoring Shall Be 750Mm Deep With Minimum Of 100Mm Nb Dia Supported With M.S. Angle 25X25x4mm. The Instruction Plate Of Size 75Mmx150mm Of Ss 304 Grade Plate With 0.7Mm Thick Shall Be Riveted On 5Mm Thick Plate With Gmc Emblem And Your Company Emblem At Two Sides Facing To Users With Laser Printing. All Plastic Parts Should Solid Poly Propylene Co-Polymer ( Ppcp ) And Uv- Stabilized Should Be Used. All Products Of Equipment Should Be Manufactured As Per En 16630 Safety Norms And To Be Produced Proof Of Valid Certificate Conformity To En16630. 1.00 Horse Rider / Aero Rider ( 1000X700x1000 Mm ) ( ± 10% Tolerance Allowable ) 0.00 Supply, Deli+B38very, Installation And Commissioning Of Double Sit Up Board / Double Abs Station / Hd Sit Up Station With Center Pipe & Prime Stand Sleeve Shall Be Minimum Of 100Mm Nb Dia Of Thickness Not Less Than 5.00Mm, Footrest Support & Sit Up Board Support Pipe Shall Be Minimum Of 50Mm Nb Dia Of Thickness Not Less Than 4.1Mm, Handle Frame & Seat Frame Support Shall Be Minimum Of 32Mm Nb Dia Of Thickness Not Less Than 3.6Mm & Connecting Link Pipes Shall Be Minimum Of 25Mm Nb Dia Of Thickness Not Less Than 3.60Mm Are Of C Class Heavy Grade Of Tata / Jindal Make With Hot Dipped Galvanised With Minimum Of 75 Microns Zinc Dipped Joint With Robotic Welded. Sit Up Board Made With High Quality Frp / Ss304 Perforated Material. All Pipes Shall Be Uniformly Powder Coated Up To Minimum 100 Microns Thickness To Avoid Corrosion. All Open Ends Of Pipes, Bearings, Bushes And Base Cover Shall Be Closed By Ss 304 Grade Stainless Steel For Safety Against Entrapment, Corrosion & Water Resistant. The Foundation Pipe With Anchoring Shall Be 750Mm Deep With Minimum Of 100Mm Nb Dia Supported With M.S. Angle 25X25x4mm. The Instruction Plate Of Size 75Mmx150mm Of Ss 304 Grade Plate With 0.7Mm Thick Shall Be Riveted On 5Mm Thick Plate With Gmc Emblem And Your Company Emblem At Two Sides Facing To Users With Laser Printing. All Plastic Parts Should Solid Poly Propylene Co-Polymer ( Ppcp ) And Uv- Stabilized Should Be Used. All Products Of Equipment Should Be Manufactured As Per En 16630 Safety Norms And To Be Produced Proof Of Valid Certificate Conformity To En16630. 1.00 Double Sit Up Board / Double Abs Station / Hd Sit Up Station ( 1700X1300x900 Mm ) ( ± 10% Tolerance Allowable )
