|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 3 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : ( 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)) |
| 4 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. ( Mild steel and Medium Tensile steel bars ) |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). (G.F.) |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). (F.F.) |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. (Mild steel and Medium Tensile steel bars) G.F. |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. (Mild steel and Medium Tensile steel bars) F.F. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for : ( Lintels, beams, plinth beams, girders, bressumers and cantilevers ) G.F. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for : ( Lintels, beams, plinth beams, girders, bressumers and cantilevers ) F.F. |
| 11 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: (Cement mortar 1:6 (1 cement : 6 coarse sand) ) G.F. |
| 12 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 13 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : (Cement mortar 1:6 (1 cement : 6 coarse sand)G.F. |
| 14 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : (Cement mortar 1:6 (1 cement : 6 coarse sand)F.F. |
| 15 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand) G.F. |
| 16 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand) F.F. |
| 17 | 12 mm cement plaster of mix : (1:6) cement and sand mortar, including supply of all material, labour and T&P etc complete. G.F. |
| 18 | 12 mm cement plaster of mix : (1:6) cement and sand mortar, including supply of all material, labour and T&P etc complete. F.F. |
| 19 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 20 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 21 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : (25 mm thick ) G.F. |
| 22 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : (25 mm thick ) F.F. |
| 23 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. G.F. |
| 24 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. F.F. |
| 25 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints(Payment for grouting of joints to be made separately). 11.47.1 Size of Tile 500x500 mm G.F. |
| 26 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints(Payment for grouting of joints to be made separately). 11.47.1 Size of Tile 500x500 mm F.F. |
| 27 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 28 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors. (40 mm wide and 4 mm thick) |
| 29 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. G.F. |
| 30 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). |
| 31 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. |
| 32 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 33 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : |
| 34 | Providing and fixing bright finished brass handles with screws etc. complete |
| 35 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 36 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. |
| 37 | Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.G.F. |
| 38 | Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.F.F. |
| 39 | Plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. G.F. |
| 40 | Plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. F.F. |
| 41 | Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS:12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge |
| 42 | Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at thespacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip madeout of 2.64mm dia x 230mm long G.I wire at every junction. F.F. |
| 43 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : (New work (two or more coats) over and including water tinnable priming coat with cement primer) New work (two or more coats) over and including water tinnable priming coat with cement primer |
| 44 | Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm. |
| 45 | French spirit polishing :Two or more coats on new works including a coat of wood filler. |
| 46 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.80 mm thick with zinc coating not less than 275 gm/m² |
| 47 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. |
| 48 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 49 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : ( 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)) |
| 50 | Centering and shuttering including strutting, propping etc. and removal of form for : ( Lintels, beams, plinth beams, girders, bressumers and cantilevers ) |
| 51 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. (Mild steel and Medium Tensile steel bars) |
| 52 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: (Cement mortar 1:6 (1 cement : 6 coarse sand) ) |
| 53 | 12 mm cement plaster of mix : (1:6) cement and sand mortar, including supply of all material, labour and T&P etc complete. |
| 54 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade, Two or more coats on new work. |
| 55 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid each. |
| 56 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 57 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : (One urinal basin with 5 litre white P.V.C. automatic flushing cistern) |
| 58 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls whereverrequire: |
| 59 | 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 60 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. ( 32 mm dia) |
| 61 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 62 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc (15 mm dia nominal bore) |
| 63 | 18.32 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : |
| 64 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter metre |
| 65 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter metre |
| 66 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. per litre. |
| 67 | Providing and fixing brass bib cock of approved quality : ( 15 mm nominal bore) |
| 68 | Providing and fixing brass stop cock of approved quality : |
| 69 | Providing and fixing uplasticised PVC connection pipe with brass unions : ( 15 mm nominal bore) |
| 70 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : |
| 71 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 72 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 73 | Providing and fixing glazed shutter for doors, windows and clerestory windows 35mm thick including supply of all material, labour and T&P etc complete. (Second class teak wood) |
| 74 | Providing and fixing bright finished brass handles with screws etc. (125mm) |
| 75 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type each foot rests. |
| 76 | Providing and fixing white vitreous china flat back or wall corner type lipped front (One urinal basin with 5 litre white P.V.C. automatic flushing cistern.) |
| 77 | Kitchen sink with drain board (510x1040 mm bowl depth 225mm) |
| 78 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (10 litre capacity-White) |
| 79 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: |
| 80 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including all necessary fitting (15 mm dia. nominal bore) |
| 81 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including all necessary fitting (20 mm dia. nominal bore) |
| 82 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including all necessary fitting (25 mm dia. nominal bore) |
| 83 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 84 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (110 mm diameter) |
| 85 | Providing and placing on terrace (at all floor levels) litre polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (10 litre capacity-White) |
| 86 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. (15 mm nominal bore) |
| 87 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 of standard design and of approved make conforming to IS:8931. approved quality conforming to IS standards and weighing not less than 690 gms. (15 mm nominal bore) |
| 88 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. (Flixible pipe 32mm dia) |
| 89 | Providing and fixing uplasticised PVC connection pipe with brass unions (30 cm length 15mm dia) |
| 90 | Providing and fixing mirror of superior glass (of approved quality)(Rectangular shape 453x357mm) |
| 91 | 600mm long towel rail with total length of 645mm, Nos. width 78mm and effective height of 88mm, weighing not less than 190gms. |
| 92 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet |
| 93 | Providing and fixing C.P. brass angle cock for basin mixer and geyser points of approved quality conforming to IS:8931 (15 mm dia) |
| 94 | Providing and fixing PTMT soap Dish Holder having Nos. length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. |
| 95 | Providing and fixing bend of required degree with access door, insertion rubber Sand cast iron S&S as per IS - 1729 (100mm dia) |
| 96 | Providing and fixing bend of required degree with access door, insertion rubber Sand cast iron S&S as per IS - 1729 (75mm dia) |
| 97 | Providing and fixing plain bend of required degree with access door, insertion rubber Sand cast iron S&S as per IS - 1729 (100mm dia) |
| 98 | Providing and fixing plain bend of required degree with access door, insertion rubber (Sand cast iron S&S as per IS - 1729) (75mm dia) |
| 99 | Providing and fixing double equal junction of required degree with access door, (100x100x100x100mm) Sand cast iron S&S as per IS - 1729 |
| 100 | Providing and fixing double equal junction of required degree with access door, (75x75x75x75 mm) Sand cast iron S&S as per IS - 1729 |
| 101 | Providing and fixing single equal plain junction of required degree with access ((100x100x100x100mm) Sand cast iron S&S as per IS - 1729) |
| 102 | Providing and fixing single equal plain junction of required degree with access ((75x75x75x75 mm) Sand cast iron S&S as per IS - 1729) |
| 103 | Providing and fixing terminal guard: ((100mm) Sand cast iron S&S as per IS - 1729) |
| 104 | Providing and fixing terminal guard: (75 mm) Sand cast iron S&S as per IS - 1729 |
| 105 | Providing and fixing collar:(100mm) Sand cast iron S&S as per IS - 1729 |
| 106 | Providing and fixing collar: (75 mm) Sand cast iron S&S as per IS - 1729 |
| 107 | Providing and fixing trap of self cleansing design with screwed down or hinged (100 mm inlet and 100 mm outlet) Sand cast iron S&S as per IS: 3989. |
| 108 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore. |
| 109 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 32 mm nominal bore. |
| 110 | Providing and fixing ball valve (brass) of approved quality complete (High or low pressure with plastic floats (15 mm nominal bore) |
| 111 | Providing and fixing gun metal non-return valve of approved quality (screwed end) 25 mm nominal bore Vertical (25 mm nominal bore Vertical) |
| 112 | Providing and fixing brass ferrule with C.I. mouthcover including boring and tapping the main (15 mm nominal bore) |
| 113 | Cutting holes upto 30x30 cm in walls including making good the same (With F.P.S. bricks.) |
| 114 | Cutting holes upto 15x15 cm in R.C.C. floors and roofs each for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. (With F.P.S. bricks.) |
| 115 | Supplying and fixing C.I. cover 300x300 mm without metre frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg |
| 116 | Making soak pit 2.5 m diameter 3.0 metre deep with 45x 45 cm dry brick honey (With F.P.S. bricks) |
| 117 | Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately): |
| 118 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :(White solid plastic seat with lid) |
| 119 | Constructing masonry Chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : |
| 120 | Constructing masonry Chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : |
| 121 | Providing and fixing bright finished brass butt hinges with necessaryscrews etc. (125x85x5.5 mm (heavy type)) |
| 122 | Providing and fixing bright finished brass butt hinges with necessaryscrews etc.(100x85x5.5 mm (heavy type)) |
| 123 | Providing and fixing bright finished brass towerbolts (barrel type)with necessary (250x10 mm) |
| 124 | Providing and fixing bright finished brass towerbolts (barrel type)with necessary fittings (200x10 mm) |
| 125 | Providing and fixing bright finished brass door latch with necessary screws etc.(300x16x5 mm) |
| 126 | Providing and fixing bright finished brass handles with screws etc. (100mm) |
