Provn Of Repair / Maint And Periodical Services Of Type-Ii Qtrsbldg No.P / 2010 / 08 Of 29 Ar At Radhanagar Provn Of Repair / Maint And Periodical Services Of Type-Ii Qtrsbldg No.P / 2010 / 08 Of 29 Ar At Radhanagar, Radhanagar, Tripura-Tripura
TDR : 30111804
Tender Notice
BOQ
Expired
Radhanagar, Tripura
Tripura
Provn Of Repair / Maint And Periodical Services Of Type-Ii Qtrsbldg No.P / 2010 / 08 Of 29 Ar At Radhanagar Provn Of Repair / Maint And Periodical Services Of Type-Ii Qtrsbldg No.P / 2010 / 08 Of 29 Ar At Radhanagar
Name of Work: Provn of repair/maint and periodical services of type-II qtrs bldg No. P/2010/08 of 29 AR at Radhanagar.
Sl. No.
Item Description
1
SCHEDULE‘A’ PART-I (REPAIR/MAINT AND PERIODICAL SERVICES OF TYPE-II QTRSBLDG NO. P/2010/08)
2
35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer\"s specification and direction of Engineer-in-charge
3
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete with 200x10 mm.
4
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete with 125 mm.
5
Providing and fixing brass bib cock of approved quality 15 mm nominal bore.
6
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour 15 mm nominal bore with 45 cm length.
7
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe 32 mm dia.
8
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete White solid plastic seat with lid.
9
Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade on Old work (one or more coats) including removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
