|
| 1 | Earth work in excavation trenches and pits in all kinds of soil within a lift of 1.5 mtrs including dressing the sides shoring (if necessary).draining out water and leveling the bed and depositing the excavated material away from the site within an initial lead of 50 mtrs, including cost of all labour, sundries, tools and plants etc, completed as per the specification & direction of the Engineer-in-charge |
| 2 | Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour,labour cess, sundries, T&P required for the work etc. complete in all respect as per direction by the Engineer in charge. |
| 3 | Cement concrete of prop.(1:3:6) in foundation up to lowest bed level using crusher broken hard black granite metal of size 4cm down graded of approved quality from approved quarry as per approved design including hoisting,lowering,laying compacting concrete in layers not exceeding 6” thick, watering, curing for three weeks shuttering the exposed surfaces, finished smooth, providing grooves of beads where necessary including cost, conveyance, royalty, & taxes of all materials, with labour, T&P required for the work etc., complete in all respects including dewatering if required as per direction of Engineer-in-Charge. |
| 4 | R.C.C. work of M20 in following works using 12 mm. to 20 mm. (½” to ¾”) size (20 mm. not to exceed 25%) hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in position. |
| 5 | Column Base Footings |
| 6 | Columns |
| 7 | Roof Beams |
| 8 | Roof Slab |
| 9 | Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL (grade Fe-500D) etc. includingbending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge. |
| 10 | Fly Ash brick masonary in Super Structure in cement mortar (1:6) in using CB Bricks of 25cm x 11cm x 8 cm having crushing strength not less than 75 Kg/Cm2 with dimentional tolerance +/- 8% including watering, curing and cost, conveyance, royality of all materials & cost of labour charges etc complete as per specification & direction of Engineer-in-charge.. |
| 11 | For Second Floore |
| 12 | Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 13 | Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 14 | Primer one coat with any approved shade including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. |
| 15 | Anti fungal weather paint of any approved shade on new work of two coats with one coat of cement paint in all floors, all heights with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. |
| 16 | Providing, Fitting & Fixing of Tiles in Walls on 12mm thick Cement Plaster in Cement mortar (1:3) jointed with neat cement Slurry mixed with Pigments including cost of Tiles, labour, T&P all comp. |
| 17 | Providing, Fiting & Fxing of wall panneling made out of Aluminium section No 9835 as horizontal and vertical member placed at spacing 2\"-0\"x2\"-0\" C/C with 9 mm thick BWR Ply and 3 mm thick A.C.P. sheet including cost, carriage and all taxes of all materials with cost of labour, T&P & machineries etc. all complete as per specification & direction of the Enginer-in-charge. |
| 18 | Priming one coat with any approved paint to old wood work & iron work including sand papering and polishing the surface smooth with cost, conveyance, royalties, taxes of all materials with all labour, T&P required for the work etc., complete in all respects. |
| 19 | Painting two coats with any approved paint to new/old iron or wood work including cost of all materials and labour with T&P etc complete in all respect. |
