|
| 1 | GYPBOARD FALSE CEILING Works |
| 2 | Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with twoequal flanges of15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary).12.5mm thick |
| 3 | WOODEN FALSE CEILING: Providing & fixing in position wooden false ceilingwith one side Decorative plywood having natural veneer of select wood on ceilingwhich includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with twoequal flanges of15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners . Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, and providing and fixing 9 mm thick BWP plywood (Greenply / Centuryply or approved equivalent make) on top of the frame work and 4 mm thick one side decorative plywood vineers ( Greenply/ Centuryply or approved equivalent make)of approved shade & texture to be pasted over theplywood with adhesive (Fevicol or approved equivalent)in approved pattern.The rate to also include cost of polishing of wooden vineer with lacquer polish of approved make,cost of polishing the wooden battons with stained spirit polish etc. complete with all labour & materials. |
| 4 | WALL PANELLING WITH DECORATIVE PLYWOOD: Providing & fixing panelling with one side Decorative plywood having natural veneerof select wood on walls including corners of windows columns , column cladding etc. consisting of frame work with 50 mm x 25 mm size seasoned Sal wood @ 600 mm c/c ( approximately) bothways ( i.e horizontally and vertically) jointed rigidly with nails, screws etc. with wooden plugs fixed with cement morter ( 1:3) and providing and fixing 6 mm thick BWR plywood (Greenply / Centuryply make) on top of the frame work and 4 mm thick one side decorative plywood vineers (Red oak/walnut/cherry/beech/white oak/white ash/swedish/cidar/maple or other approved shade and texture of Greenply/ Centuryplymake)of approved shade & texture to be pasted over theplywood with adhesive (Fevicol) without nailing in approved pattern. Finally the paneling will be finished with 25 mm x 100 mm teakwood skirting .The rate to also include cost of applying preservation treatment of timber forrot & termite proofing with wood preservative oil of Berger make fire profing, finishing the exposed surface of timber with stained spirit polish to the desired colour and melamine finish of (Wood keeper of Berger make) melaminefinish on decorative plywood, provision of extra frame work as necessary for skirting and making cutouts for electrical switch board, conuits etc. all as per drawingand direction of the Engineer in charge . |
| 5 | WALL CABINET FINISHED WITH PLYWOOD VINEERS Providing& fixing in position wall cabinet of depth upto 600 mm made of 18 mm thick plywood ( BWR) frame of \"Greenply\"/ Centuryply/Archid. The back ot be made of 6 mm thick plywood ( BWR) fixed over plywood frame.The cabinet to be provided withopenable shutters & intermediate shelf made of 18 mm thick BWR plywood.4mm thick decorative plywood vineer of approved shade & make is then pasted over plywood with adhesive nails etc. The skirting to made with 25 x 100 mm teak wood section. The shutter for the dressing table cabinet will be made with 6 mm thick glass with pivote & magnatic catch arrangement. Finally all the expose surfaces of plywood will be finished with melamine polish (Woodkeeper / Touchwood)and stained spirit polish on wooden surface. The rate to also include cost of providing Teak wood leaping on all the edges of plywood, cupboard lock of Hettich / Hafele / Godrej , handles fittings etc.(Hettich / Hafele make) all complete inclusive of all hardwares as per drawing & direction of the Engineer -in- charge. |
| 6 | Granite Work Providing polished granite slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). (i) Executive Quality (ii) With whitecement |
| 7 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite work |
| 8 | PROVIDING & FIXING LAMINATEProviding and fixing 1.00 mm thick LAMINATEof approved shade finish and make ( GREENLAM / CenturyMica / Merino / Formica) on new/old surface, including the cost of preparation of surface, supplying and applying Fevicol or equivalent adhesive with all labour and material complete , as per specifications and directions of Engineer in charge. |
| 9 | FIXING 4 MM THICK DECORATIVE PLYWOOD VINEER : Providing and fixing 4 mm thick decorative plywood vineerof Century/Greenply make & shadeon old and new surface including the cost of preparation of surface, applying adhesive.( Fevicol/vamicol) applying laquer on decorative plywood vineering etc. with all enabling works complete as per design and direction of Engineer in charge. |
| 10 | Providing and fixing 6 mm thick BWRPLY WOOD (Greenply, Century make) on new/old surface, including preparation of surface , applying adhesive ( Fevicol/ vamicol or approved equivalent ) making coutouts and other enabling jobs with all labour tools & tackles materials etc. complete as per the specifications and directions of the engineer in charge. |
| 11 | Providing and fixing 9mm thick BWRPLY WOOD (Greenply, Century make) on new/old surface, including preparation of surface , applying adhesive ( Fevicol/ vamicol or approved equivalent ) making coutouts and other enabling jobs with all labour tools & tackles materials etc. complete as per the specifications and directions of the engineer in charge. |
| 12 | Providing and fixing 19mm thick BWRPLY WOOD (Greenply, Century make) on new/old surface, including preparation of surface , applying adhesive ( Fevicol/ vamicol or approved equivalent ) making coutouts and other enabling jobs with all labour tools & tackles materials etc. complete as per the specifications and directions of the engineer in charge. |
| 13 | WOODEN JAMB LININGProviding and fixing wooden jamb lining to the windows and doors using SAL wood frame out of 50 x 25 mm covered with 12 mmthick BWR plywood and4 mm thick wooden veneer complete with 50 x 18 mm Teak wood moulding at periphery of window duly melamine polish etc. complete.a) upto 500 mm width |
| 14 | LUGGAGE RACKSupplying and placing in position luggage rack of size 750 mm x 500 mm x 400 mm (HT) , to be made with 20 mm thick well seasoned teak wood planks , 25 x 50 mm teak wood side runner and 35 mm x 20 mm wooden battons placed at an interval of 55 mm c/c at the top . The bottom portion of the luggage rack will be covered with 6 mm thick plywood as shown in the drawing . The rate to include the cost of all fittings and fixtures, finishing the exposed surfaces of timber with stained spirit polish of desired shade all complete as per design. |
| 15 | WRITING TABLE (1500 X 500)WITH MINIBAR CABINETWritting table of size 1500 x 500 x 750 (HT). The table will be provided with one no computer keyboard pyllout tray, one no drawer unit contaning 3 nos drawers. The table top, sides, drawer front and sides, to be made with 18 mm thick plywood ( BWP) of Greenply Mars/Globeply/ Alproor approved equivalent make finished on top with 4 mm thick wooden vineer ofGreen ply or approved equivalent make . The drawer bottom will be made with 6 mm thickplywood (BWP) of approved make .All the edges of plywood will be covered with 4 mm Teak wood leaping and the edges of table top will be covered with 40 x 40 Teak wood moulding finished with stained sprit polish. The skirting to be made with 25 mm x 100 mm Teak wood section. the rate to include cost of all fittings and fixtures, (drawer knob, hinges ball chatch drawer lock etc.HETTICH / Hafele make) finishing the exposed surfaces of plywood & timber with stained sprit polish all complete with labor and material as drawing and direction of engineer in charge. |
| 16 | DOUBLE BED WITH SIDE UNITSupplying and placing in position Teak wood duble bed of size 2100 x 1800 x 400 (HT) The head board of 900 mm hight shall be made with 35mm x 100 mm well seasoned teak wood frame with 12 mm thiack plywood insert finished with teak wood vineering . Periphery of the head board will be provided with teak wood decorative moulding of size 60 mm x 25 mm and moulding of size 10 mm x 10mm to be provided at the junction of frame a plywood insert. Other three sides of the bed to be made with 25 mm thick teak wood plank fitted with 25 mm x 40 mm rounding moulding at the top and 100 mm x 18 mm teak wood decorative skirting at the bottom , the top of the bed to be made with 19 mm thick block board laid in panels to form an uniform horizental surface. Finally the bed to be finished with stained sprit polish of desired shade . The rate to include cost of all fittings, fixtures , cost of providing central wooden support of size 50 mm x100 mm, |
| 17 | SINGLE BED :Supplying and placing in position Teak wood duble bed of size 2100 x 1000 x 400 (HT) The head board of 900 mm hight shall be made with 35mm x 100 mm well seasoned teak wood frame with 12 mm thick plywood insert finished with teak wood vineering . Periphery of the head board will be provided with teak wood decorative moulding of size 60 mm x 25 mm and moulding of size 10 mm x 10mm to be provided at the junction of frame a plywood insert. Other three sides of the bed to be made with 25 mm thick teak wood plank fitted with 25 mm x 40 mm rounding moulding at the top and 100 mm x 18 mm teak wood decorative skirting at the bottom , the top of the bed to be made with 19 mm thick block board laid in panels to form an uniform horizental surface.The rate to include cost of all fittings, fixtures , cost of providing central wooden support of size 50 mm x100 mm, |
| 18 | BED SIDE UNIT : Supplying & placing in position Bed side unit of size 600x 400 x 450(H) consisiing of one drawer, made of 19 mm thick plywood (BWR) finished a top with decoration plywood vineer. The Drawer bottom to be made with 6 mm thik plywood. The rate to also include cost of polishing & fixing drawewr channel, SS drawer handle of strandard make, finishing the exposed surfaces with melamine polish, complete with labour & material, all as per drawing and direction of the Engineer in charge. |
| 19 | TEAK WOOD MOULDING & SKIRTING : Providing and fixing 1st class timber moulded architrave of size 50x20mm to door and window frames with countersunk wood screw,wooden plugs and applying a coat of wood preservative on unexposed surface etc. MOULDING 50 MM X 20 MM |
| 20 | Providing andfixing timber skirting with butt joining and screws (frame work and coverfillets to be measured and paid separately). a)Teak wood / Sisu wood. (12.5 mm thick) |
| 21 | WOODEN PELMATEProviding & fixing in position wooden Pelmate of size 125 mm wide pelmatemade of 18mm thick BWR Plywood jointed with fevicol & nails finishedon top with 4mm thick decorative plywood vineer pasted over plywood with adhesive (Fevicol SH).finished with melamine polish. Finally all the edges of the plywood will be covered with 3 mm thick Teak Wood Lipping finished with stained spirit polish. The cost also include cost of polishing the internal surface of the pelmate with stained spirit polish with all accessories) |
| 22 | WHITE CEMENT PUTTY Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm)(i) Thickness = 1.5 mm thick |
| 23 | PAINTING WORKS |
| 24 | Wall painting (two coats) with Plastic emulsion paint of approvedbrand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade over a coat of cement primer after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.(a).Plastic Emulsion Paint of approvedbrand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) |
| 25 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping.(i).Surfaces over 100mm in width or girth.b). High gloss(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). |
| 26 | Polishing with french spritpolishing on new wood and wood based surfacesto give an even surface includingcleaningthe surface of all dirt, dust sand papered smooth and including a coat of wood filter |
| 27 | APPLYING PRIMING COATApplying priming coat over newwood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughlycleaningoil, grease, dirt snd other foreign matter , sand papering and knotting. (a). With ready mixed paint , Wood primer (pink) |
| 28 | Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.a). With ready mixed \"red-lead/ red oxide\" primer. |
| 29 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work/OLD SURFACE |
| 30 | Supply wall material& finishing wall with Acrylic Copolymers based DECORATIVE TEXTURE WALL FINISH ( ROYAL PLAY roller coat of M/s DULUX (ICI/AZKO NOBEL)) in approved Double shades, texture etc. onwall surfaces (INTERIOR WORK) to give an evenshade and includingscaffolding etc. complete with preparation of existing wall surface as per direction of the eingineer in charge . |
| 31 | CURTAIN FOR WINDOWSupplying, stitching and fixing in position good quality curtain of Vimal or approved equivalent ( cost of cloth not less than Rs. 400/- four hundred) only per meter of approved cloth and design including providing necessary lining with markin cloth, fixing curtain tape & PVC curtain hooks , etc. fixing in position with all labour and materials as per directions of engineer in charge with all labour and materials complete. |
| 32 | MIRROR WITH PATCH FITTINGSProviding and fixing 5.5 MM THICK FLOAT GLASS MIRROR (Modiguard / Saint Gobain /Pilkington)of approved quality complete with 12 mm thick BWR plywood backing of approved make finished at the edges with 35 mm x20 mm polished teak wood mouldingfixed to wooden cleats with C.P. brass screws and washers complete with all enabling works all as per drawing and direction of the Engineer in charge. |
| 33 | DOOR FITTINGSProviding,fitting and fixing Door closer of various type UL listed and fire rated good quality depending on the door specification.Types like single speed,Double Speed,Heavy Duty etc are available and as directed & specified by the department.A) Godrej d) Sleek Door Closer( 215mm x 51mm x 45mm) |
| 34 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )m) Mortice lock vertical type 100mm(Godrej with handle (6 lever) |
| 35 | Supplying, fitting, fixing brass fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished ).b) Tower bolts |
| 36 | i) 250mm x 10mm |
| 37 | ii) 100mm x 10mm |
| 38 | v) Door stopper with rubber stopper |
| 39 | c)Door handles (ii) 100 mm |
| 40 | MATTRESSSupply Fitting &Fixing of 8\" Thick Mattress , size 78 x72x8 HR Foam + Convoleted foam+ sottyfoam springwel pride of \"Relaxon\" \"kurl on\" or approved equivalent make all complete as per design & drawings. |
| 41 | Supply Fitting &Fixing of 8\" Thick Mattress , size 78 x36x8 HR Foam + Convoleted foam+ sottyfoam springwel pride of \"Relaxon\" \"kurl on\" or approved equivalent make all complete as per design & drawings. |
| 42 | DISMANTLING |
| 43 | Demolishing the plastering from walls/ R.C.C. and P.C.C. members without causing any damage to the wall/ member upto any height including disposal of debris as directed for all levels. |
| 44 | Demolishing brickwork including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels |
| 45 | Demolishing RCC work including stacking of steel bars and disposal of unserviceable material as directed for all levels |
| 46 | Dismantling and removing the existing door and window frame (chowkath) both wooden and steel of different sizes without damaging the walls and removing the frame and necessary repairs to the edges of the walls as directed for all levels. |
| 47 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within to KMC designated Area.For thickness of tiles 10 mm to 25 mm |
| 48 | Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints,melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:Up to 150 mm diameter metre |
| 49 | Dismantling all types of ceiling, partition and wall lining and stacking the materials as directed by the department for all levels |
| 50 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 51 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :15 mm to 40 mm nominal bore |
| 52 | Applying one self-priming coat of acrylic emulsion coating of approved brand by thinning 1ltrs of paints with 1ltrs of water over freshly plastered wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth as specified and directed by the department. |
| 53 | MODULAR KITCHEN |
| 54 | Supply & installation of SS Bottle Pullout, 2 storied,Corner Carousel, Cutlery(perforated), Cup n Saucer, Plate, Both SS (304 Grade) plain drawers, Cylinder Unit (Framing with Shutter only) No Cabinet, Sink Unit, Tall Unit with 3 SS Plain basket & open space for appliences, Wall cabinet with one shelf. All the cabinet will be made with 18 mm BWR Plywood finished on Top with High Gloss decorative laminate (1 mm thick) , inside of the cabinets will be finished with 0.8 mm thick white laminate. All fittings will be Godrej / Hettich / Hafle make. All complete as per direction of Engineer - in- Charge & approved specified drawing . |
| 55 | Providing and fixing white vitreous china Wall Hung water closet (European type) with UF seat cover, hinges &accessories set.,complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required of Hindware or approved equivalent make.NILE CAT No. 92525(53 X 36 X 34.5) CM |
| 56 | Providing and fixing Table Top wash basin with C.I.brackets,32 mm C.P. brass waste of standard pattern,includingpainting of fittings and brackets, cutting and making good the walls wherever require RIO OF Hindaware (CAT NO. 91071) or approved equivalentsize (48 X 32 X 11) CM |
| 57 | Providing and fixing Half Pedestal wash basin with C.I.brackets,32 mm C.P. brass waste of standard pattern,includingpainting of fittings and brackets, cutting and making good the walls wherever require [model no. 10087 & 11027 MARIO OF HINDWARE] |
| 58 | Providing & fixing 600 mm long CP Brass towel rail of Jaquar (Model No. AKP-35711P) |
| 59 | Providing & Fixing CP Brass Bottle Trap with internal partition32 mm size with 250 mm & 190mm long wall connection pipe & wall flenge (Model No. ALD-769L 250 X 190) |
| 60 | Providing and fixing C.P. brass Two way Bib Cock with wall flanged (ARI-39041) of Jaquar make |
| 61 | Providing and fixing C.P. brass Angular stop cockof standard designand of Jaquar make with wall flange (ARI-39053)approved make conforming to IS:8931 |
| 62 | Slim concealed Cistern with wall mounting Frame, Installation kit & flush control Plate, Model No, (CIB WHT-31801011 X W, CIS-CHR-31181810 X W of Jaquar make. |
| 63 | CP brass Towel Rack600 mm long with lower hanger of jaquar make (AKP-35781P |
| 64 | CP Brass single lever basin mixture with regular spout without popup waste system with 450 mm long braided hoses of JaquarmakeARIA (MODEL -ARI-3900 IB), |
| 65 | CP Brass Single Lever Wall Mixture with provision for both handshower & overhead shower complete with diverter & concealedpart of Jaquar make: ARI-39079K & ALD-079 |
| 66 | Supplying, fitting and fixing Overhead shower round shape single flow of Jaquar make or approved equivalent make .OHS-1759 (180 ?) |
| 67 | Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.ALD - CHR-565 Chrome finish & Model -ALLIED of Jaquar or similar). |
| 68 | C.P Brass Bath Tab Spout with button attachment for Hand Showerwith wall flange of Jaquar (SPJ-35463) |
| 69 | Soap Dish Holder of Jaquar make (AKP-35731P) |
| 70 | Toilet Paper Roll Holder with Flap (AKP- 35753P) |
| 71 | CP Brass Double Coat Hook of Jaquar(AKP-35761P) |
| 72 | 450 mm long braided Hose with two units (15mm)& Rubber washers without nipple (Suitable for Geysers of Jaquar (ALD - 805B) |
| 73 | 600 mm long braided Hose with MI0XInipple . 15 mm nut , 0-ring @ rubber washer Suitable for Basin Mixer (ALD - 801B) |
| 74 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end )25 mm nominal bore |
| 75 | Providing and fixing soil, waste and vent pipes :100 mm dia. Sand cast iron S&S pipe as per IS : 1729 |
| 76 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete100 mm (Plain Bend)Sand cast iron S&S as per IS - 1729 |
| 77 | Providing and fixing plain bend of required degree100 mm dia. Sand cast IronS&S as per IS-1729 |
| 78 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : For 100 mm dia pipe each 152.90 |
| 79 | Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :100x100x100x100 mmSand cast iron S&S as per IS - |
| 80 | Providing and fixing single equal plain junction of required degree with access door,insertion rubber washer 3 mm thick , bolts and nuts complte. 100 x 100 x 100mm Sand cast iron S&S as per IS - 1729 |
| 81 | Providing and fixing sand cast iron S&S off sets as per IS: 1729114 mm off setsWith 100 mm dia pipe |
| 82 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 100 mm outlet |
| 83 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15 mm nominal outer dia Pipes |
| 84 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm nominal outer dia PIPES |
| 85 | SUPPLY & FIXING OF MCB DB : |
| 86 | SUPPLY & FIXING OF MCB DB : Supplying and fixing following way prewired TP&N MCB distribution board of steel sheet for 415 volts on surface/ recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FRLS PVC insulated copper conductor up to terminal blocks, tinned copper bus bar,neutral link, earth bar, din bar, detachable gland plate,interconnections, powder painted including earthing etc. as required.(But without MCB/ RCCB/ Isolator). |
| 87 | 4 way (4 + 12), Double door |
| 88 | 6 way (4 + 18), Double door |
| 89 | Supplying and fixing of MCB Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 90 | Single pole |
| 91 | Triple pole and neutral |
| 92 | Single pole Blanking plate :Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 93 | Earthing and Accessories : Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. |
| 94 | Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. |
| 95 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 96 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 97 | Providing and fixing 6 SWG dia G.I. wire on surface or in reces for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 98 | CABLE AND ACCESSORIES : |
| 99 | Supply of Cable: Supply of 1.1 KV grade XLPE aluminium cable of following rating. (Non Schedule Item). 4C x 16 sq mm armoured cable. |
| 100 | Laying of Cable : Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on cable tray as required. Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 101 | SUPPLY AND FIXING OF PVC CONDUIT : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 102 | 20 mm |
| 103 | 25 mm |
| 104 | 32 mm |
| 105 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. |
| 106 | 150 mm X 75 mm X 60 mm deep |
| 107 | 150 mm X 150 mm X 60 mm deep |
| 108 | 200 mm X 150 mm X 60 mm deep |
| 109 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 110 | 2 way 5/6 amps switch |
| 111 | 15/16 amp switch |
| 112 | 3 pin 5/6 amp socket outlet |
| 113 | 6 pin 15/16 amp socket outlet |
| 114 | Telephone socket outlet |
| 115 | TV antenna socket outlet |
| 116 | Bell push |
| 117 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. |
| 118 | 3 Module (100mmX75mm) |
| 119 | 1 or 2 module |
| 120 | ITC of Light/fan fittings : |
| 121 | Erection of wall bracket /ceiling fittings of all sizes and shapes containing upto twolamps per fitting, complete with all accessories including connection etc. as required. |
| 122 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. |
| 123 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. (Upto 450 mm sweep) |
| 124 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 125 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch,connection etc. as required. |
| 126 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 127 | Wiring for light point/ fan point/ exhaust fan point/ call bell point :Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. |
| 128 | Group A (Short point) |
| 129 | Group B (medium point) |
| 130 | Group C (long point) |
| 131 | Wiring for20A AC Starter Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.(For AC) |
| 132 | CIRCUIT/ SUBMAIN WIRING : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. |
| 133 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (For 6/16A power socket wiring & From DB to SWB) |
| 134 | 4 X 4 sq. mm + 2 X 4 sq. mm earth wire |
| 135 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required :2 Pair |
| 136 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/ PVC conduit as required. |
| 137 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. |
| 138 | SUPPLY OF LIGHT & FAN FIXTURES: |
| 139 | Supply of 1 x 20 W LED TUBE LIGHTFittings (TL) complete . 1 Nos 20 W tube and duly interconnection wire. [Sllimline of philips 20w] |
| 140 | LED DOWN LIGHT(DL): Supply of 12 W LED Down light fittings Ultra sleems+down lighter of Philips [12 w] |
| 141 | LED PANEL LIGHT (PL): Supply of 7 W LED Panel(4\"x4\") light fittings with4K(7 w) |
| 142 | DOUBLE BRACKET LIGHT (DBL): Supply of 2 x 4 W LED wall mountedlight fittings [Philips Cat No. 56242/31 ] |
| 143 | BED SIDE LIGHT (BSL): Supply of 1 x 3W- 3000k wall mounted bed sidelight fittings[Philips Cat No. 48042 ] |
| 144 | CEILING LIGHT (CL): Supply of 1 x 12 W surface ceiling mounted LED light fittings[staw surface of Philips] |
| 145 | MIRROR LIGHT: Supply of 1 x 3.6WLED walllight for Bathroom & over mirror , Philips Cat No. 34034/ 14/86 Jasoba) |
| 146 | LED STRIP: Supply, installation, testing & commissioning of LED Strip Light (28 W for 5 Meter ) with driver of Philips Model No. 31308 |
| 147 | SUPPLY OF CEILING FAN : Supply ofCeiling Fans of Bajaj / CromptonGreaves / Khaitan / Usha make only . 1200 mm sweep excluding regulator . |
| 148 | EXHAUST FAN: Supply of ISI marked 300 mm sweep, 230 Volt AC Ring mounted Exhaust Fan including wire guard etc. |
| 149 | LED FOOT LIGHT (FC) : Supply of4 Module LED FOOT Light of Crabtre make , Model No. ACAPFCWL04 |
| 150 | Supply, installation, testing & commissioning of 4 Model 20A Starter with 20A plug of Crabtree make , AC Starter , Code No. ACA0202504 |
| 151 | Supply, installation, testing & commissioning of Modular KEY TAG |
