Military Engineer Services-MES has published Repair To Flooring, Joinery, Plastering And Sanitary Fittings And Roof Treatmrnt At Otm Accn Of Zone A To B At Military Station Sri Ganganagar Repair To Flooring, Joinery, Plastering And Sanitary Fittings And Roof Treatmrnt At Otm Accn Of Zo. Submission Date for this Tender is 27-12-2021. Shed Construction Tenders in GE Sri Ganganagar Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 06-Dec-2021 | amndt1 | Other | 20-12-2021 |
| 2 | 20-Dec-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-12-2021 |
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed by Engineer - in -Charge. |
| 2 | M&L glazed ceramic coloured tilesgrade, (300x450)x7mm thick as on vertical surfaces like dados or skirting over 10mm thick rendering in CM 1:4, set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in -Charge. |
| 3 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm laid in floor set and jointed in cement slurry including 15 mmthick screed bed or bedding layer of cement mortar 1:4 for laying floor finish even & fair and pointed in white cement mixed with pigment to match the shade of tilescomplete all as specified and directed. |
| 4 | M&L for25 thick cement concrete flooring type B-0 1:2:4 (12.5 mm graded stone aggregate) complete all as specified and directed. |
| 5 | M&L for non skid colouredceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm in floor laid in pattern with two or more coloured tiles combination design as approved concept to match the concept of wall ceramic tiles etc set and jointed in cement slurry including 15 mmthick screed bed or bedding layer of cement mortar 1:4 for laying floor finish even & fairand pointed in white cement mixed with pigment to match the shade of tilescomplete all as specified and directed. |
| 6 | All as per Srl item No. 5.0 here in before but on vertical surfaces/skirting dados etc over 10mm rendering in CM 1:4 finished even and fair, complete all as specified and directed by Engineer - in -Charge. |
| 7 | Demolition of cement Concrete(un-renforced) in ground floors and pavingsexc 15 cm thickness above ground level complete all as specified and directed. |
| 8 | Demolition of cement concrete of any description and in any position for sunken portion and floor all as specified and directed by Engr-in-charge. |
| 9 | M&L for water proofing treatment to RCC sunken slab as specified below asd as directed by engr-in-charge:- (a) 15mm plaster in CM 1:3 with WPC on raised vertical surface. (B) Cleaning the surface with wire brush/coir brush, removing loose material like dust particles ,dirt etc. (c) Creating fillet covering of 50x50 mm with polymer modified mortar on the junction of slab and walls(d) Apply first coat of two component modified polymer coating on the horizontal and vertical surfaces. (e) Provision of glass fibre mesh of 2x2 mm immidiately on above coating (f) Apply second coat of two component modified polymer coating after 72 hours (g) Laying concrete 1:4:8 over the coating as per requirement (h) Joining the sanitary pipe with non shrink cementatiuos grout (k) Complete the treatment to be carried out by authorised applicator of waterproofing manufacturer. NOTE : (i) The Treatment shall be carried out as per the manufacturers industreis and as directed by eng-in-charge. (ii) The plan area of floor shall be consider for payment.(iii) WPC shall be measured and paid saperately. |
| 10 | Supply only Water proofing compound complete all as specified and directed by Engr-in-Charge. |
| 11 | M&L cement concrete 1:5:10 Type E-2 using 40 mm graded stone aggregate as in foundation filling andmass concrete complete all as specified and directed by Engr-in-Charge. |
| 12 | S&F in repairs bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed of 15 mm bore with long body complete all as specified and directed by Engineer in charge. |
| 13 | S&F in repairs fency type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure of 15 mm bore diawith or without lettered Hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer in charge. |
| 14 | S&F in repairs fency type pillar taps 15 mmof PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed by Engineer in charge. |
| 15 | S&F in repair 15 mm dia fancy type chromium plated concealed type stop valves, cast copper aloy with crutch or butterfly handles screwed down high pressure, screwed both ends for iron and fixed. |
| 16 | S&F in repairs, stop valves, cast screwed down, high pressure copper alloy, with crutch or butterfly handles, screwed both ends for 15mm bore iron pipe or brass ferrule complete all as specified and directed by Engineer - in -Charge. |
| 17 | S&F in repairs, stop valves, chromium plated cast screwed down, high pressure copper alloy, with crutch or butterfly handles, screwed both ends for but fancy type 15mmbore iron pipe orcomplete all as specified and directed by Engineer - in -Charge. |
| 18 | S&F in repairs, stop valves, of PTMT, screwed both ends for 15 mm bore iron pipe or brass ferrule complete all as specified and directed by Engineer - in -Charge. |
| 19 | Dismantling water tank capacity exc 250 Ltr and n exc 1000 ltr complete all as specified and directed by Engineer - in -Charge. |
| 20 | S&F rotational moulded polyethylene water storage tank 500 ltrs capacity three layered (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer - in -Charge. |
| 21 | S&F rotational moulded polyethylene water storage tank 1000 ltrs capacitythree layered (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer - in -Charge. |
| 22 | S&F in repairs, 20mm bore ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed by Engineer - in -Charge. |
| 23 | S&F in repairs, 25 mm bore ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed by Engineer - in -Charge. |
| 24 | Dismantling cast iron pipe of any dia,jointed in cement mortar and taking out of trenches if required complete all as specified and directed by Engineer - in -Charge. |
| 25 | S&F 100mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed by Engineer - in -Charge. |
| 26 | S&F 75mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed by Engineer - in -Charge. |
| 27 | S&F 100mm bore cast iron bends sand cast (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer - in -Charge. |
| 28 | S&F 100mm bore cast iron "Y" tee sand cast fitted with oval access door complete all as specified and directed by Engineer - in -Charge. |
| 29 | M&L for CI floor trap 100 mm with anti cockroaches grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified and directed by Engr-in-charge. |
| 30 | M&L for CI floor trap 75mm with anti cockroaches grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified and directed by Engr-in-charge. |
| 31 | Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan – necks, etc. including cleaning of any description complete all as specified and directed by Engineer - in -Charge. |
| 32 | M&L bands straps supports or stays for rainwater ventilating pipes including bolts confirming to Fe 290 Gde E-165 all as specified and directed by Engr-in-charge. |
| 33 | S&F 110mm bore PVC (SWR) rain water pipe single socketed in any length with rubber ring joints, jointed with solvent joint fixed to wall complete all as specified and directed by Engineer - in -Charge. |
| 34 | S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed by Engineer - in -Charge. |
| 35 | S & F in repairAluminium anodisedtubular towel rail 20mm dia “D” type 60 cm long between flanges including brackets complete all as specified and directed by Engineer - in -Charge. |
| 36 | S & F in repair 600mm long PTMT towel rail fixed with and including chromium plated brass screws and wooden plastic cleatscomplete all as specified and directed by Engineer - in -Charge. |
| 37 | S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engineer - in -Charge. |
| 38 | S&F water closet vitreous china squatting pan "Orrisa pattern" size 580mmx440mm white with integral foot rests (Excl flushing cistern) including all joints and making good to the floor complete all as specified including CI "P" trap/S trap all as specified and directed by Engr-in-charge. |
| 39 | S & F 600 x 450 mm size bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed with wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engineer - in -Charge. |
| 40 | S&F in repairs, PVC low level flushing cistern 10 lirs capacity, valve-less, syphonic action type, white, with inlet, ball valve, float, and handle including brackets, PVC connections 15 mm size with PTMT nuts of length 450 mm ,including 32mm bore flush pipe of polyethylene of low or high density of PVC complete all as specified and directed by Engineer - in -Charge. |
| 41 | S&F, in repair vitreous china wash hand basin, white flat back of size 550mmx400mm including brackets, 32mm bore brass chromimum plated waste coupling & 32mm bore low density ployethylene (LDPE) flush pipe of pressure rating 6Kgf/Sq cm (1.00 M long) complete, including 15mm cast copper alloy chromium plated pillar taps and 15mm bore 450 mm length PVC connection with PTMT nuts. |
| 42 | S & F in repairs waste couplings of PTMT (half or full threaded) of40 mm complete all as specified and directed by Engineer in charge. |
| 43 | S&F in repairs low density polyethylene pipes (LDPE) 32 mm dia and 1000 mm long of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors complete all as specified and directed by Engineer in charge. |
| 44 | S&F in repairs low density polyethylene pipes (LDPE) 40 mm dia and 1000 mm long of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors complete all as specified and directed by Engineer in charge. |
| 45 | S&Ffloor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor and overall length of cover plate 140 mm complete all as specified and directed by Engineer in charge. |
| 46 | S&F in floor door stopper of brass body and tongue, anodised with hard drawn steel spring fixed in floor and overall length of cover plate 140 mm complete all as specified and directed by Engineer in charge. |
| 47 | Taking up or down for 20mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed by Engineer - in -Charge. |
| 48 | Taking up or down for 15 mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed by Engineer - in -Charge. |
| 49 | S&F steel water tubing galvanised 15mm bore, “medium grade” with all fittings and fixed to walls and ceiling or in floor complete all as specified and directed by Engineer - in -Charge. |
| 50 | All as per Srl item No. 47 here in before but fixing with new fittings only complete all as specified and directed by Engineer - in -Charge. |
| 51 | S&F steel water tubing galvanised 20mm bore, “medium grade” with all fittings fixed to wall and ceiling or in floor complete all as specified and directed by Engineer - in -Charge. |
| 52 | All as per Srl item No. 48 here in before but fixing with new fittings only complete all as specified and directed by Engineer - in -Charge. |
| 53 | S&F in repairs,fency types bib taps,15 mm cast copper alloy, with crutch or butterfly handles, screwed down, screwed for iron pipe or brass ferrule for 15mm bore complete all as specified and directed by Engineer - in -Charge. |
| 54 | S&F in repairs Plasticwater closet seat, back, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer in charge. |
| 55 | S&F in repairvitreous china wash down water closet pan (Pedstal pattern), white excluding fixing bolts, flushing cistern and flush pipe, including plastic water coset seat, black cosed pattern with flat bottom, and cover and mild steel chromimum plated hinging device & trap. |
| 56 | S&F in repairs PTMT shower rose of any colour with swivel joints including shower arm of 15 mm bore, 195 mm long with bend of 45 degree with flanges of PTMT (min weight 80 grams) complete all as specified & directed by Engineer in charge. |
| 57 | S&F in repairs chromium plated shower rose of any colour with or without swivel joints 125mm size including shower armcomplete all as specified & directed by Engineer in charge. |
| 58 | S&F in repairsStainless steel soap dish of any size fixed withscrews complete all as specified and directed by Engineer in charge. |
| 59 | S&F in repairs grating doom 100 mm dia of PTMT with and without hole complete all as specified and directed by Engineer vin charge. |
| 60 | S&F in repairs grating doom 100 mm dia of stainless steel with and without hole complete all as specified and directed by Engineer vin charge. |
| 61 | S&F in repairs vitreous china urinals, bowl type flat back size of 465*355*265 mm complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe including waste pipe and trap complete all as specified and directed by Engg in charge. |
| 62 | S&F in repairs Urinal spreader of PTMT any colour for fixing 15 mm dia pipe complete all as specified and directed by Engineer in charge. |
| 63 | Taking down shutters exc 1 sqm but n.exc 2sqm of any description & after repairing refixing in same opening complete all as specified & directed by Engineer in charge. |
| 64 | Taking down chowkhats or frames (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 sqm each complete all as specified and directed by Engineer - in -Charge. |
| 65 | Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 sqm each complete all as specified and directed by Engineer - in -Charge. |
| 66 | Taking down chowkhats or frames (without taking off shutters from the frames) not exceeding 1.5sqm each complete all as specified and directed by Engineer - in -Charge. |
| 67 | S&F Aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawl plug and screw or with fixing clip or with expansion hold plate fasteners . Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required all complete as per the direction of Engineer-in-charge |
| 68 | S&F Aluminium window and ventilator shutters, fixed type without sash bar,aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, powder coated aluminium snap beading screws, powder coated aluminium fitting such as hinges type B-21 100 mm size (2 Nos), suitable handle (2 Nos) of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed. |
| 69 | M&L sheet glass of selected quality plain 5.5 mm thickness fixed in door shutter/window shutter not exc 0.50 sqm in each panel cut to required size with PVC/Neopane gasket etc. complete as per directed by Engineer-in-charge(Aluminium snap beading shall be paid separately) |
| 70 | S&Fstainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed by Engineer - in -Charge. |
| 71 | S&F Aluminum Grill any pattern aperture size 50 mm and wire dia 5 mm fixed with Aluminum Frame complete all as specified and directed.Note- Aluminum frame shall be Measured and paid seperately |
| 72 | S & F pressed steel door frames with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., size of frame 105x60mm complete all as specified and directed by Engineer - in -Charge. |
| 73 | All as per Srl item No.72here in before but size 125 x 60mm complete all as specified and directed by Engineer - in -Charge. |
| 74 | S&F 75 mm Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type C-21 all as specified and directecd by Engr-in-charge. |
| 75 | S&F mild steel butt hinges “medium weight” 100mm long cold rolled mild steel complete all as specified and directed by Engineer - in -Charge. |
| 76 | Taking down steel window or ventilator fixed type with glazing bar all as specified and directed by Engr-in-charge. |
| 77 | S & F hasp and staple, safety type stove enameled black,of mild steel 100mm size complete all as specified and directed by Engineer - in -Charge. |
| 78 | M&L Cement concrete 1:2:4 type B–0(12.5 mm graded stone aggregate) filling of pressed steel frame and hold fast blocks etc complete all as specified and directed by Engineer - in -Charge. |
| 79 | M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. |
| 80 | S&F in repairs stainlesssteel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed by Engineer - in -Charge. |
| 81 | S & F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engineer - in -Charge. |
| 82 | S & F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed by Engineer - in -Charge. |
| 83 | M&L for mild steel work as in frame work/guard bar for door and window and as similar work includingcutting tops to shape, drilling holes, notching for wire etcconforming toFe-290 grade E-165 complete all as specified and directed . |
| 84 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames, including punching or drilling out old glazing pins / spring clips and glazed with oil putty complete all as specified and directed by Engineer - in -Charge. |
| 85 | S&F3mm thick sheet glass ordinary quality and glazing with oil putty in each pane of any size complete all as specified and directed by Engineer - in -Charge. |
| 86 | S&F in repairs 4 mm thicksheet glass ordinary quality and glazing with oil putty in each pane of any sizecomplete all as specified and directed by Engineer - in -Charge. |
| 87 | S&F in repairs 4 mm thick figuredglass ordinary quality and glazing with oil putty in each pane of any sizecomplete all as specified and directed by Engineer - in -Charge. |
| 88 | S&F in repairs 5.5 mm thick sheet glass ordinary quality and glazingin each pane of any size complete all as specified and directed by Engineer - in -Charge. |
| 89 | M&L for weldingrepairs exc 20 mm but n exc 25 mm in length complete all as specified and directed by Engineer in charge. |
| 90 | S&F in repairs mortice brass lock vertical type 4 levers size 100 mm complete all as specified and directed by Engineer in charge. |
| 91 | S&F in repairs Aluminium extruded body door closure hydraulically regulated, designation No 3 universal type suitable for door shutters of any size complete all as specified and directed by Engineer in charge. |
| 92 | S & F in repairs aluminium handles cast type anodised, 125mm long complete all as specified and directed by Engineer - in -Charge. |
| 93 | S & F in repairs aluminium handles cast type anodised, 100mm long complete all as specified and directed by Engineer - in -Charge. |
| 94 | S & F in repairs aluminium handles cast type anodised, 75mm long complete all as specified and directed by Engineer - in -Charge. |
| 95 | S&F in repairs mild steel pressed handles, oval type, stove enamelled black 125 mm long complete all as specified and directed by Engineer in charge. |
| 96 | S&F in repairs mild steel pressed handles, oval type, stove enamelled black 100 mm long complete all as specified and directed by Engineer in charge. |
| 97 | S& F in repairs aluminium anodised barrel tower bolts of extruded section and fixed 100 mm size complete all as specified & directed by Engineer in charge. |
| 98 | S&F in repairs mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed 125 mm size complete all as specifdied and directed by Engineer in charge. |
| 99 | S&F in repairsmild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed 100 mm size complete all as specifdied and directed by Engineer in charge. |
| 100 | S&F in repairs 150mmExtruded aluminium alloy handlesfabricated type complete all as specified and directed. |
| 101 | S&F in repairs 300 mm mild steel sliding door bolts, clip type, stone enameled block with bright bolt not less than 12mm dia with and incl a minimum of 6 boltsand nuts, 4 on bolt plate 2 on staple plate. |
| 102 | S&F in repairs HDPE lid cover for water tank of capacity 500 Ltr & 1000 Ltr complete all as specified and directed by Engineer in charge. |
| 103 | S & F in repairstainless steeltubular towel rail 20mm dia “D” type 60 cm long between flanges including brackets complete all as specified and directed by Engineer - in -Charge. |
| 104 | S & F for 35mm thick factory made gauged skelton shutters open rebated and prepared to receive gauze etc edges of framing plain, chamfered or rounded fitted with cut and mitred beady for receiving gauze etc of 35mm thick and door for Iind class hard wood rail and style as specified in SSR Part-I Section 8, cluase 8.24(a) and all as specified and directed by Engr-in-Charge. |
| 105 | S & F for 35mm thick factory made IInd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed. |
| 106 | M&L for preparation of surfacesof new wooden Surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 107 | Demolition of cement Concrete(un-renforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 108 | M&L for 75mm thick Cement concrete type C-2 , 1:3:6 (40 mm graded aggregate) as in plinth protection laid in alternate bay n.exc 2.5m length including necessary formwork all as specified and directed by engr-in-charge. |
| 109 | M&L for 75mm thick Cement concrete type C-2 , 1:3:6 (40 mm graded aggregate) as in sub base of floor all as specified and directed. |
| 110 | M&L for Sand filling under floors or in foundations including wateringand consolidation complete all as specified and directed. |
| 111 | M&L for Machine pressed precast concrete interlocking paver block any shape and sze confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete all as specified. |
| 112 | Dimolition of Brick tiles or terracing tiles , single layer on roofs complete all as specified and directed. |
| 113 | Demolition of old mud phuska, removing rubbish of the premises cleaning surface and preparing to receive new mud plastercomplete all as specified and directed by Engineer-in-Charge. |
| 114 | M&L for PCC 1:2:4 type B2(20 mm graded aggregate) as in roof padding/mass concrete complete all as specified and directed by Engineer in chgarge. |
| 115 | Providing and applying waterproofing work with polyester reinforced APP membrane sheet of thickness 3mm by Mechanically clean the RCC slab and wall with wire brush / coir brush to freee from all loose materials like dust, dirt ect make wattah / coving of 50x50 mm at all horizontal and vertical joints to avoid right angle turning with polymer based mortar. Apply one coat of solvent based bitumen primer on cleaned & leveled surface @ 3-5 Sqmtr / ltr per coat. Unroll the Dr. FIxit Torchshield roll after application of primer. Align the Dr. FIxit Torchshield roll correctlv & re-roll it in alignment before torching. Use gas burner to heat substrate and underside to softening points. When the embossing disappers, roll forward and press fimly against substrate to bond from the lower end towards the higher end. Keep overlap margin for minimum 100mm. Heat both the overlaps and use round tipped trowel to seal overlap. Excess compound shold be smoothened and pressed into seam using hot trowel. |
| 116 | Taking down cement plaster of amy description on bricks or concrete surfaces of walls including racking out joints, hacking for keys scrubbing down with water etc. complete all as specified directed by Engr-in-Charge. |
| 117 | M&L 15mm thick, rendering in cement mortar 1:6 to brick/concrete wall surfaces finishedeven and smooth without using extra cementcomplete all as specified and directed by Engr-in-Charge. |
| 118 | M&L 15mm thick, rendering in cement mortar CM 1:4 to brick/concrete wall surfaces in two layers first layer 10mm thick and second layer 5mm thick with WPC 3% by wt of cement finished even & smoothwithout using extra cement complete all as specifiedand directed by Engr-in-Charge. |
| 119 | M&L 5mm thick, rendering in cement mortar1:3 to ceiling surfaces on patches finished even and smoothwithout using extra cement in patches complete all as specified and directed by Engr-in-Charge. |
| 120 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper,over a coat of chalk whiting complete all as specified and directed by Engineer-in-Charge. |
| 121 | M&L forpreparation of new plaster surfaces of ceiling and applying three coat of white wash complete all as specified and directed by Engineer-in-charge. |
| 122 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint,over a coat of white wash complete all as specified and directed by Engineer-in-Charge. |
| 123 | M & L for preparation of old decorated wall surfacesby brooming down or steel wire brushing,scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spotsand then applying two coat of oil bounddistemper over a coat of wall care putty complete all as specified and directed by Engineer - in -Charge. |
| 124 | M & L for preparation of old decorated ceiling surfacesby brooming down or steel wire brushing,scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spotsand then applying two coat of oil bounddistemper complete all as specified and directed by Engineer - in -Charge. |
| 125 | M&L for preparation of old surface including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and removing all dirt and dust by watering making surface even and smooth and then applying one coat of cement base paint over well prepared old decorated plastered surface etc all as specified and directed by Engineer - in -Charge. |
| 126 | S & F of Fiberways Brand or equivalentFiber Glass Reinforced plastic (FRP) Door Frames of three legged of cross section 90mmx45mm having single rebate of 32mmx45mm having single rebate of 32mmx15mm to receive shutter of 30 mm thickness. The laminate door frame molded with fire retardant grade unsaturate polysterresinn and chopped mat.Doorframe laminate shall be 2 mm thick and shall be filled with suitable wooden black in all the three legs. The frame shall be covered with fiberglass from all sides MS stay shall be provided at the bottom to steady the frame.complete all as specified and directedby Engineer - in -Charge. |
| 127 | S & F of fiberways brand 30mm thick glass fiber reinforced plastic (FRP) paneled door shutter of required color and approved brand and manufacture made with fire retardent grade unsaturated polyster resin moulded to 3mm thick FRP laminated for forming hollow rails and style with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP laminate for panels for conforming to IS:14856-2000 complete all as specified and directed by Engineer - in -Charge. |
| 128 | S&F Safety lever locks mild steel with4 levers for rolling shutters complete all as specified. |
| 129 | S& F Ball Bearing for rolling shutters complete all as specified and directed. |
| 130 | M&L for repairing of rolling shutter area exc 5.0sqm but n.exc 10.0sqm including replacement of damaged part of shutter like ball bearing, top cover anchoring rod, hasp and staples complete all as specified and directed by Engr-in-charge. |
| 131 | M&L for repairing of rolling shutter area n.exc 5.0sqm including replacement of damaged part of shutter like ball bearing, top cover anchoring rod, hasp and staples complete all as specified and directed by Engr-in-charge. |
| 132 | S & F in repairs 18/19mm thick Particle Board, medium density, flat pressed single layer type or three layer type with BWR type adhesive, fixed with screws to timber framwork complete all as specified and directed by Engr-in-charge. |
| 133 | S&F forRolled mild steel in roof trusses, (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee,angle,channel or flat sections) including distance pieces , cleats etc. conforming toFe-290 grade E-165 complete all as specified and directed . |
| 134 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified. |
| 135 | Dismantling Asbestos cement ( corrugated, semicorrugated ,etc.) sheets in roof coverings complete all aspecified. |
| 136 | S&FPPGL/PPGI based corrugated steel sheet 0.50mm thick of red colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
| 137 | S&F forPPGL/PPGI based plain steel sheet 0.50mm thick of red colour having tensile strength of 550 Mpa as in ridge covering to wall, fixed with self tapping screws as specified. |
| 138 | M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed by Engineer-in-Charge. |
| 139 | S&F mild steel screw bolts (machine made) with hexagonal or square head at one end, screwed end to be fitted with washer and one hexagonal/ square nut not exceeding 5cm long complete all as specified and directed by Engineer - in -Charge. |
| 140 | M & L for pre-cast RCC pillar/post for maharaja jallies (Jafri) type B-0 using 12.50mm graded crushed stone aggregate and set in cement mortar 1:4including removing old broken pillar all as specified and directed by Engr-in-charge. |
| 141 | M&L for pre-cast RCC jallies(Jafri)/maharaja jallies 25mm thick type B-0 using 12.50mm graded crushed stone aggregate and set in cement mortar 1:4 including taking down old broken rcc jallies all as specified and directed by Engr-in-charge. |
| 142 | S&F in repair fancy type SS curtain rod 25 mm dia with brackets knob rings(20 cm c/c) etc all as specified and directed by Engr-in-charge. |
| 143 | Note : Notes : (i) Amount ofcredit for retrieved materials is mentionedin Sch "A" Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
